ReP USP - Resultado da busca

Artigo de periodico
Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools (2024)
Santos, Julianne Alice; Santos, Matheus Felipe; Moreira, Murilo Henrique; Angélico, Ricardo Afonso ; Pandolfelli, Victor Carlos
Source: International Journal of Applied Ceramic Technology. Unidade: EESC
Subjects: ECONOMIA DE ENERGIA, MÉTODO DOS ELEMENTOS FINITOS, TRANSFERÊNCIA DE CALOR, REFRATÁRIOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Julianne Alice et al. Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools. International Journal of Applied Ceramic Technology, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1111/ijac.14928. Acesso em: 15 nov. 2024.
APA
Santos, J. A., Santos, M. F., Moreira, M. H., Angélico, R. A., & Pandolfelli, V. C. (2024). Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools. International Journal of Applied Ceramic Technology, 1-14. doi:10.1111/ijac.14928
NLM
Santos JA, Santos MF, Moreira MH, Angélico RA, Pandolfelli VC. Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools [Internet]. International Journal of Applied Ceramic Technology. 2024 ; 1-14.[citado 2024 nov. 15 ] Available from: https://dx.doi.org/10.1111/ijac.14928
Vancouver
Santos JA, Santos MF, Moreira MH, Angélico RA, Pandolfelli VC. Evaluation of steel ladle refractories lining designs aiming energy savings using open-source finite element tools [Internet]. International Journal of Applied Ceramic Technology. 2024 ; 1-14.[citado 2024 nov. 15 ] Available from: https://dx.doi.org/10.1111/ijac.14928
Artigo de periodico
Insights into thermomechanical behavior and design parameters of alumina calciner refractory lining (2024)
Pereira, C. I.; Santos, M. F.; Moreira, M. H.; Braulio, M.; Iwanaga, T.; Pandolfelli, V. C.
Source: Ceramics International. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, REFRATÁRIOS, DESIGN, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, C. I. et al. Insights into thermomechanical behavior and design parameters of alumina calciner refractory lining. Ceramics International, p. 1-9, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ceramint.2024.08.251. Acesso em: 15 nov. 2024.
APA
Pereira, C. I., Santos, M. F., Moreira, M. H., Braulio, M., Iwanaga, T., & Pandolfelli, V. C. (2024). Insights into thermomechanical behavior and design parameters of alumina calciner refractory lining. Ceramics International, 1-9. doi:10.1016/j.ceramint.2024.08.251
NLM
Pereira CI, Santos MF, Moreira MH, Braulio M, Iwanaga T, Pandolfelli VC. Insights into thermomechanical behavior and design parameters of alumina calciner refractory lining [Internet]. Ceramics International. 2024 ; 1-9.[citado 2024 nov. 15 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2024.08.251
Vancouver
Pereira CI, Santos MF, Moreira MH, Braulio M, Iwanaga T, Pandolfelli VC. Insights into thermomechanical behavior and design parameters of alumina calciner refractory lining [Internet]. Ceramics International. 2024 ; 1-9.[citado 2024 nov. 15 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2024.08.251
Artigo de periodico
Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C (2024)
Vargas, Rafael; Zago, Igor Paganotto; Sciuti, Vinicius Fiocco; Furlan, Matheus; Angélico, Ricardo Afonso ; Hild, François; Canto, Rodrigo Bresciani
Source: Materials Research. Unidade: EESC
Subjects: ALTA TEMPERATURA, MATERIAIS, REFRATÁRIOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VARGAS, Rafael et al. Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C. Materials Research, v. 27, p. 1-16, 2024Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2024-0072. Acesso em: 15 nov. 2024.
APA
Vargas, R., Zago, I. P., Sciuti, V. F., Furlan, M., Angélico, R. A., Hild, F., & Canto, R. B. (2024). Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C. Materials Research, 27, 1-16. doi:10.1590/1980-5373-MR-2024-0072
NLM
Vargas R, Zago IP, Sciuti VF, Furlan M, Angélico RA, Hild F, Canto RB. Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C [Internet]. Materials Research. 2024 ; 27 1-16.[citado 2024 nov. 15 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2024-0072
Vancouver
Vargas R, Zago IP, Sciuti VF, Furlan M, Angélico RA, Hild F, Canto RB. Multi-window setup for thermomechanical experiments assisted by DIC up to 900°C [Internet]. Materials Research. 2024 ; 27 1-16.[citado 2024 nov. 15 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2024-0072
Artigo de periodico
DIC to evaluate a model composite system cracking due to CTE mismatch (2024)
Zago, Igor Paganotto; Vargas, Rafael; Sciuti, Vinicius Fiocco; Canto, Rodrigo Bresciani; Angélico, Ricardo Afonso
Source: Theoretical and Applied Fracture Mechanics. Unidade: EESC
Subjects: IMAGEM DIGITAL, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAGO, Igor Paganotto et al. DIC to evaluate a model composite system cracking due to CTE mismatch. Theoretical and Applied Fracture Mechanics, v. 131, p. 1-11, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.tafmec.2024.104330. Acesso em: 15 nov. 2024.
APA
Zago, I. P., Vargas, R., Sciuti, V. F., Canto, R. B., & Angélico, R. A. (2024). DIC to evaluate a model composite system cracking due to CTE mismatch. Theoretical and Applied Fracture Mechanics, 131, 1-11. doi:10.1016/j.tafmec.2024.104330
NLM
Zago IP, Vargas R, Sciuti VF, Canto RB, Angélico RA. DIC to evaluate a model composite system cracking due to CTE mismatch [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-11.[citado 2024 nov. 15 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104330
Vancouver
Zago IP, Vargas R, Sciuti VF, Canto RB, Angélico RA. DIC to evaluate a model composite system cracking due to CTE mismatch [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-11.[citado 2024 nov. 15 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104330
Artigo de periodico
A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle (2023)
Cunha, T. M.; Moreira, M. H.; Santos, M. F.; Angélico, Ricardo Afonso ; Pandolfelli, V. C.
Source: Open Ceramics. Unidade: EESC
Subjects: ISOLAMENTO TÉRMICO, EFICIÊNCIA ENERGÉTICA, REFRATÁRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CUNHA, T. M. et al. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, v. 13, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100330. Acesso em: 15 nov. 2024.
APA
Cunha, T. M., Moreira, M. H., Santos, M. F., Angélico, R. A., & Pandolfelli, V. C. (2023). A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, 13, 1-10. doi:10.1016/j.oceram.2023.100330
NLM
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Vancouver
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Artigo de periodico
Prediction of elastic parameters of particle reinforced composites using finite element simulations (2023)
Schiavon, Fernando Luís ; Zanardi, Heloísa ; Zago, Igor Paganotto ; Angélico, Ricardo Afonso
Source: Materials Research. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIAVON, Fernando Luís et al. Prediction of elastic parameters of particle reinforced composites using finite element simulations. Materials Research, v. 26, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0475. Acesso em: 15 nov. 2024.
APA
Schiavon, F. L., Zanardi, H., Zago, I. P., & Angélico, R. A. (2023). Prediction of elastic parameters of particle reinforced composites using finite element simulations. Materials Research, 26, 1-11. doi:10.1590/1980-5373-MR-2022-0475
NLM
Schiavon FL, Zanardi H, Zago IP, Angélico RA. Prediction of elastic parameters of particle reinforced composites using finite element simulations [Internet]. Materials Research. 2023 ; 26 1-11.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0475
Vancouver
Schiavon FL, Zanardi H, Zago IP, Angélico RA. Prediction of elastic parameters of particle reinforced composites using finite element simulations [Internet]. Materials Research. 2023 ; 26 1-11.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0475
Trabalho de evento
Crack pattern of a composite model material submitted to a temperature increase assisted by dic (2021)
Zago, Igor Paganotto; Canto, Rodrigo Bresciani; Angélico, Ricardo Afonso
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAGO, Igor Paganotto e CANTO, Rodrigo Bresciani e ANGÉLICO, Ricardo Afonso. Crack pattern of a composite model material submitted to a temperature increase assisted by dic. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf. Acesso em: 15 nov. 2024.
APA
Zago, I. P., Canto, R. B., & Angélico, R. A. (2021). Crack pattern of a composite model material submitted to a temperature increase assisted by dic. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
NLM
Zago IP, Canto RB, Angélico RA. Crack pattern of a composite model material submitted to a temperature increase assisted by dic [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
Vancouver
Zago IP, Canto RB, Angélico RA. Crack pattern of a composite model material submitted to a temperature increase assisted by dic [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/9d542f07-24d2-469b-afe2-f9eb31247ae0/2916-8123-1-PB.pdf
Trabalho de evento
Prediction of the effective young modulus of 2D periodic cells via finite element analysis (2021)
Schiavon, Fernando Luís; Angélico, Ricardo Afonso
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Assunto: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIAVON, Fernando Luís e ANGÉLICO, Ricardo Afonso. Prediction of the effective young modulus of 2D periodic cells via finite element analysis. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/64db842a-7361-4abd-818c-3449708c100a/2949-8047-1-PB.pdf. Acesso em: 15 nov. 2024.
APA
Schiavon, F. L., & Angélico, R. A. (2021). Prediction of the effective young modulus of 2D periodic cells via finite element analysis. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/64db842a-7361-4abd-818c-3449708c100a/2949-8047-1-PB.pdf
NLM
Schiavon FL, Angélico RA. Prediction of the effective young modulus of 2D periodic cells via finite element analysis [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/64db842a-7361-4abd-818c-3449708c100a/2949-8047-1-PB.pdf
Vancouver
Schiavon FL, Angélico RA. Prediction of the effective young modulus of 2D periodic cells via finite element analysis [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/64db842a-7361-4abd-818c-3449708c100a/2949-8047-1-PB.pdf
Trabalho de evento
Computation tool based on finite element simulations for prediction of composite materials effective elastic properties (2021)
Zanardi, Heloísa; Angélico, Ricardo Afonso
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANARDI, Heloísa e ANGÉLICO, Ricardo Afonso. Computation tool based on finite element simulations for prediction of composite materials effective elastic properties. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/7cf1aa05-ffdd-46ee-b68a-fa3e3d23b56d/3028-8254-1-PB.pdf. Acesso em: 15 nov. 2024.
APA
Zanardi, H., & Angélico, R. A. (2021). Computation tool based on finite element simulations for prediction of composite materials effective elastic properties. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/7cf1aa05-ffdd-46ee-b68a-fa3e3d23b56d/3028-8254-1-PB.pdf
NLM
Zanardi H, Angélico RA. Computation tool based on finite element simulations for prediction of composite materials effective elastic properties [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/7cf1aa05-ffdd-46ee-b68a-fa3e3d23b56d/3028-8254-1-PB.pdf
Vancouver
Zanardi H, Angélico RA. Computation tool based on finite element simulations for prediction of composite materials effective elastic properties [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/7cf1aa05-ffdd-46ee-b68a-fa3e3d23b56d/3028-8254-1-PB.pdf
Trabalho de evento
Optimization of the laminate stacking sequence for a flexible subsea pipeline of peek/ck composite (2021)
Silva, Lucas Aparecido Fernandes da; Macedo, Salvino Cesar Mello de; Angélico, Ricardo Afonso ; Canto, Rodrigo Bresciani
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Lucas Aparecido Fernandes da et al. Optimization of the laminate stacking sequence for a flexible subsea pipeline of peek/ck composite. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/1b6fd88d-44fc-409a-84ae-703fc5460d6a/2987-8199-1-PB.pdf. Acesso em: 15 nov. 2024.
APA
Silva, L. A. F. da, Macedo, S. C. M. de, Angélico, R. A., & Canto, R. B. (2021). Optimization of the laminate stacking sequence for a flexible subsea pipeline of peek/ck composite. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/1b6fd88d-44fc-409a-84ae-703fc5460d6a/2987-8199-1-PB.pdf
NLM
Silva LAF da, Macedo SCM de, Angélico RA, Canto RB. Optimization of the laminate stacking sequence for a flexible subsea pipeline of peek/ck composite [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/1b6fd88d-44fc-409a-84ae-703fc5460d6a/2987-8199-1-PB.pdf
Vancouver
Silva LAF da, Macedo SCM de, Angélico RA, Canto RB. Optimization of the laminate stacking sequence for a flexible subsea pipeline of peek/ck composite [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/1b6fd88d-44fc-409a-84ae-703fc5460d6a/2987-8199-1-PB.pdf
Artigo de periodico
Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining (2020)
Campos, Maria Gabriela Garcia; Santos, Matheus Felipe dos; Moreira, Murilo Henrique; Angélico, Ricardo Afonso ; Sako, Eric Yoshimitsu; Pandolfelli, Victor Carlos
Source: International Journal of Ceramic Engineering and Science. Unidade: EESC
Subjects: ENERGIA, TRANSFERÊNCIA DE CALOR, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, Maria Gabriela Garcia et al. Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining. International Journal of Ceramic Engineering and Science, v. 2, p. 113-129, 2020Tradução . . Disponível em: https://doi.org/10.1002/ces2.10043. Acesso em: 15 nov. 2024.
APA
Campos, M. G. G., Santos, M. F. dos, Moreira, M. H., Angélico, R. A., Sako, E. Y., & Pandolfelli, V. C. (2020). Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining. International Journal of Ceramic Engineering and Science, 2, 113-129. doi:10.1002/ces2.10043
NLM
Campos MGG, Santos MF dos, Moreira MH, Angélico RA, Sako EY, Pandolfelli VC. Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining [Internet]. International Journal of Ceramic Engineering and Science. 2020 ; 2 113-129.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1002/ces2.10043
Vancouver
Campos MGG, Santos MF dos, Moreira MH, Angélico RA, Sako EY, Pandolfelli VC. Holistic view of the insulating layer on the thermal efficiency of a steel ladle lining [Internet]. International Journal of Ceramic Engineering and Science. 2020 ; 2 113-129.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1002/ces2.10043
Artigo de periodico
Enhanced numerical tool to evaluate steel ladle thermal losses (2018)
Santos, Matheus Felipe dos; Moreira, Murilo Henrique; Campos, Maria Gabriela Garcia; Pelissari, Pedro Ivo Batistel Galiote Brossi ; Angélico, Ricardo Afonso ; Sako, Eric Yoshimitsu; Sinnema, S.; Pandolfelli, Victor Carlos
Source: Ceramics International. Unidade: EESC
Subjects: ECONOMIA DE ENERGIA, DESIGN, REFRATÁRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Matheus Felipe dos et al. Enhanced numerical tool to evaluate steel ladle thermal losses. Ceramics International, v. 44, p. 12831-12840, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2018.04.092. Acesso em: 15 nov. 2024.
APA
Santos, M. F. dos, Moreira, M. H., Campos, M. G. G., Pelissari, P. I. B. G. B., Angélico, R. A., Sako, E. Y., et al. (2018). Enhanced numerical tool to evaluate steel ladle thermal losses. Ceramics International, 44, 12831-12840. doi:10.1016/j.ceramint.2018.04.092
NLM
Santos MF dos, Moreira MH, Campos MGG, Pelissari PIBGB, Angélico RA, Sako EY, Sinnema S, Pandolfelli VC. Enhanced numerical tool to evaluate steel ladle thermal losses [Internet]. Ceramics International. 2018 ; 44 12831-12840.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.ceramint.2018.04.092
Vancouver
Santos MF dos, Moreira MH, Campos MGG, Pelissari PIBGB, Angélico RA, Sako EY, Sinnema S, Pandolfelli VC. Enhanced numerical tool to evaluate steel ladle thermal losses [Internet]. Ceramics International. 2018 ; 44 12831-12840.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.ceramint.2018.04.092
Trabalho de evento
Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing (2018)
Pelegrineli, Luis Antonio Vieira; Liorbano, Felipe Fernandes; Natori, Henrique Ossamu Hisano; Angélico, Ricardo Afonso
Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: FUSELAGEM DE AERONAVES, AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PELEGRINELI, Luis Antonio Vieira et al. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf. Acesso em: 15 nov. 2024.
APA
Pelegrineli, L. A. V., Liorbano, F. F., Natori, H. O. H., & Angélico, R. A. (2018). Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
NLM
Pelegrineli LAV, Liorbano FF, Natori HOH, Angélico RA. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing [Internet]. Proceedings. 2018 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
Vancouver
Pelegrineli LAV, Liorbano FF, Natori HOH, Angélico RA. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing [Internet]. Proceedings. 2018 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
Trabalho de evento
Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory (2017)
Liorbano, Felipe Fernandes; Pelegrineli, Luis Antonio Vieira; Angélico, Ricardo Afonso
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIORBANO, Felipe Fernandes e PELEGRINELI, Luis Antonio Vieira e ANGÉLICO, Ricardo Afonso. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf. Acesso em: 15 nov. 2024.
APA
Liorbano, F. F., Pelegrineli, L. A. V., & Angélico, R. A. (2017). Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
NLM
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Vancouver
Liorbano FF, Pelegrineli LAV, Angélico RA. Application of Galerkin method to the solution of aerodynamic models based on the lifting-line theory [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/2e83d21b-13bd-4fb4-8b76-02198c7ab7eb/trabalho%2007%20-%20%20Application%20of%20Galerkin%20method%20to%20the%20solution%20of%20aerodynamic%20models%20based%20on%20the%20lifting-line%20theory%20%28COBEM%202017%29.pdf
Trabalho de evento
Influence of infrared welding parameters on thermoplastic composite joint quality (2017)
Oliveira, Jeferson de; Bordini, Christopher Carlos; Angélico, Ricardo Afonso ; Tarpani, José Ricardo
Source: Anais. Conference titles: Meeting on Aeronautical Composite Materials and Structures - MACMS 2015. Unidade: EESC
Subjects: PROCESSOS DE FABRICAÇÃO, MATERIAIS COMPÓSITOS, POLÍMEROS (MATERIAIS), ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Jeferson de et al. Influence of infrared welding parameters on thermoplastic composite joint quality. 2017, Anais.. São Carlos, SP: EESC-USP, 2017. Disponível em: http://soac.eesc.usp.br/index.php/macms/macms/paper/view/320/280. Acesso em: 15 nov. 2024.
APA
Oliveira, J. de, Bordini, C. C., Angélico, R. A., & Tarpani, J. R. (2017). Influence of infrared welding parameters on thermoplastic composite joint quality. In Anais. São Carlos, SP: EESC-USP. Recuperado de http://soac.eesc.usp.br/index.php/macms/macms/paper/view/320/280
NLM
Oliveira J de, Bordini CC, Angélico RA, Tarpani JR. Influence of infrared welding parameters on thermoplastic composite joint quality [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: http://soac.eesc.usp.br/index.php/macms/macms/paper/view/320/280
Vancouver
Oliveira J de, Bordini CC, Angélico RA, Tarpani JR. Influence of infrared welding parameters on thermoplastic composite joint quality [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: http://soac.eesc.usp.br/index.php/macms/macms/paper/view/320/280
Trabalho de evento
Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models (2017)
Zanardi, Heloísa; Zago, Igor Paganotto; Angélico, Ricardo Afonso
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MATERIAIS CERÂMICOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANARDI, Heloísa e ZAGO, Igor Paganotto e ANGÉLICO, Ricardo Afonso. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf. Acesso em: 15 nov. 2024.
APA
Zanardi, H., Zago, I. P., & Angélico, R. A. (2017). Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
NLM
Zanardi H, Zago IP, Angélico RA. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
Vancouver
Zanardi H, Zago IP, Angélico RA. Prediction of the crack pattern in ceramic composites subjected to temperature variation using lattice models [Internet]. Anais. 2017 ;[citado 2024 nov. 15 ] Available from: https://repositorio.usp.br/directbitstream/829e244f-3b77-4e13-82a3-71c75899d1e2/trabalho%2006%20-%20%20Prediction%20of%20the%20crack%20pattern%20in%20ceramic%20composites%20subjected%20to%20temperature%20variation%20using%20lattice%20models%20%28COBEM%202017%29.pdf
Artigo de periodico
Thermal expansion mismatch inter-inclusion cracking in ceramic systems (2016)
Luchini, Bruno; Sciuti, Vinicius Fiocco; Angélico, Ricardo Afonso ; Canto, Rodrigo Bresciani; Pandolfelli, Victor Carlos
Source: Ceramics International. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MATERIAIS CERÂMICOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LUCHINI, Bruno et al. Thermal expansion mismatch inter-inclusion cracking in ceramic systems. Ceramics International, v. 42, n. 10, p. 12512-12515, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2016.05.013. Acesso em: 15 nov. 2024.
APA
Luchini, B., Sciuti, V. F., Angélico, R. A., Canto, R. B., & Pandolfelli, V. C. (2016). Thermal expansion mismatch inter-inclusion cracking in ceramic systems. Ceramics International, 42( 10), 12512-12515. doi:10.1016/j.ceramint.2016.05.013
NLM
Luchini B, Sciuti VF, Angélico RA, Canto RB, Pandolfelli VC. Thermal expansion mismatch inter-inclusion cracking in ceramic systems [Internet]. Ceramics International. 2016 ; 42( 10): 12512-12515.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.ceramint.2016.05.013
Vancouver
Luchini B, Sciuti VF, Angélico RA, Canto RB, Pandolfelli VC. Thermal expansion mismatch inter-inclusion cracking in ceramic systems [Internet]. Ceramics International. 2016 ; 42( 10): 12512-12515.[citado 2024 nov. 15 ] Available from: https://doi.org/10.1016/j.ceramint.2016.05.013
Trabalho de evento-anais periodico
Progressive failure analysis of low energy impact in carbon fiber filament winding cylinders (2014)
Ribeiro, Marcelo Leite ; Martins, Túlio Henrique Portilho; Angélico, Ricardo Afonso ; Vandepitte, D; Tita, Volnei
Source: Blucher Mechanical Engineering Proceedings. Conference titles: World Congress on Computational Mechanics - WCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, FALHA, DANO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Marcelo Leite et al. Progressive failure analysis of low energy impact in carbon fiber filament winding cylinders. Blucher Mechanical Engineering Proceedings. São Paulo, SP: Editora Blucher. . Acesso em: 15 nov. 2024. , 2014
APA
Ribeiro, M. L., Martins, T. H. P., Angélico, R. A., Vandepitte, D., & Tita, V. (2014). Progressive failure analysis of low energy impact in carbon fiber filament winding cylinders. Blucher Mechanical Engineering Proceedings. São Paulo, SP: Editora Blucher.
NLM
Ribeiro ML, Martins THP, Angélico RA, Vandepitte D, Tita V. Progressive failure analysis of low energy impact in carbon fiber filament winding cylinders. Blucher Mechanical Engineering Proceedings. 2014 ; 1( 1): [1-17].[citado 2024 nov. 15 ]
Vancouver
Ribeiro ML, Martins THP, Angélico RA, Vandepitte D, Tita V. Progressive failure analysis of low energy impact in carbon fiber filament winding cylinders. Blucher Mechanical Engineering Proceedings. 2014 ; 1( 1): [1-17].[citado 2024 nov. 15 ]
Tese (Doutorado)
Study of resistance welded composite joints: from the manufacturing process to the mechanical behaviour (2013)
Angélico, Ricardo Afonso ; Tita, Volnei (Orientador); Schmitt, Nicolas (coorient); Billardon, René (coorient)
Unidade: EESC
Subjects: SOLDAGEM, JUNTAS SOLDADAS, RESISTÊNCIA ELÉTRICA, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANGÉLICO, Ricardo Afonso. Study of resistance welded composite joints: from the manufacturing process to the mechanical behaviour. 2013. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2013. Disponível em: http://www.teses.usp.br/teses/disponiveis/18/18148/tde-14122017-111250/. Acesso em: 15 nov. 2024.
APA
Angélico, R. A. (2013). Study of resistance welded composite joints: from the manufacturing process to the mechanical behaviour (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de http://www.teses.usp.br/teses/disponiveis/18/18148/tde-14122017-111250/
NLM
Angélico RA. Study of resistance welded composite joints: from the manufacturing process to the mechanical behaviour [Internet]. 2013 ;[citado 2024 nov. 15 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18148/tde-14122017-111250/
Vancouver
Angélico RA. Study of resistance welded composite joints: from the manufacturing process to the mechanical behaviour [Internet]. 2013 ;[citado 2024 nov. 15 ] Available from: http://www.teses.usp.br/teses/disponiveis/18/18148/tde-14122017-111250/
Trabalho de evento
Numerical and experimental analysis of low velocity impact on thin composite (2013)
Ribeiro, Marcelo Leite ; Angélico, Ricardo Afonso ; Medeiros, Ricardo de; Marinucci, Gerson; Tita, Volnei
Source: Proceedings of MECSOL. Conference titles: International Symposium on Solid Mechanics - MECSOL. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, LAMINADOS, MÉTODO DOS ELEMENTOS FINITOS, IMPACTO DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Marcelo Leite et al. Numerical and experimental analysis of low velocity impact on thin composite. 2013, Anais.. Porto Alegre, RS: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2013. . Acesso em: 15 nov. 2024.
APA
Ribeiro, M. L., Angélico, R. A., Medeiros, R. de, Marinucci, G., & Tita, V. (2013). Numerical and experimental analysis of low velocity impact on thin composite. In Proceedings of MECSOL. Porto Alegre, RS: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Ribeiro ML, Angélico RA, Medeiros R de, Marinucci G, Tita V. Numerical and experimental analysis of low velocity impact on thin composite. Proceedings of MECSOL. 2013 ;[citado 2024 nov. 15 ]
Vancouver
Ribeiro ML, Angélico RA, Medeiros R de, Marinucci G, Tita V. Numerical and experimental analysis of low velocity impact on thin composite. Proceedings of MECSOL. 2013 ;[citado 2024 nov. 15 ]

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Non normalized affiliation