ReP USP - Resultado da busca

Trabalho de evento
Diamond tool wear analysis during machining of microstructure surface for microinjection molding (2013)
Jasinevicius, Renato Goulart; Granado, Renê Mendes; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: DIAMANTE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e GRANADO, Renê Mendes e CIRINO, Giuseppe Antonio. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 nov. 2024.
APA
Jasinevicius, R. G., Granado, R. M., & Cirino, G. A. (2013). Diamond tool wear analysis during machining of microstructure surface for microinjection molding. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ]
Vancouver
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ]
Trabalho de evento
Design and construction of a novel assisted tool-holder (2013)
Javarez Junior, Laercio; Duduch, Jaime Gilberto; Gonçalves, Andre Motta; Otoboni, José Antônio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PIEZOELETRICIDADE, SISTEMAS DE CONTROLE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAVAREZ JUNIOR, Laercio et al. Design and construction of a novel assisted tool-holder. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf. Acesso em: 09 nov. 2024.
APA
Javarez Junior, L., Duduch, J. G., Gonçalves, A. M., & Otoboni, J. A. (2013). Design and construction of a novel assisted tool-holder. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
NLM
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Vancouver
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Trabalho de evento
Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue (2013)
Lima, Rodrigo Mendes; Massaroppi Júnior, Ernesto
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: CINEMÁTICA, FADIGA DOS MATERIAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Rodrigo Mendes e MASSAROPPI JÚNIOR, Ernesto. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf. Acesso em: 09 nov. 2024.
APA
Lima, R. M., & Massaroppi Júnior, E. (2013). Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
NLM
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
Vancouver
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
Trabalho de evento
Measurement of rotor vibration through photographic images (2013)
Endo, Marcos Tan; Montagnoli, Arlindo Neto ; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, FOTOGRAMETRIA, PROCESSAMENTO DIGITAL DE IMAGENS, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ENDO, Marcos Tan e MONTAGNOLI, Arlindo Neto e NICOLETTI, Rodrigo. Measurement of rotor vibration through photographic images. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf. Acesso em: 09 nov. 2024.
APA
Endo, M. T., Montagnoli, A. N., & Nicoletti, R. (2013). Measurement of rotor vibration through photographic images. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
NLM
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
Vancouver
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
Trabalho de evento
Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds (2013)
Vieira, André Ferreira Costa; Guedes, Rui M.; Tita, Volnei
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ANDAIMES, VISCOELASTICIDADE DAS ESTRUTURAS, PLÁSTICOS BIODEGRADÁVEIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIEIRA, André Ferreira Costa e GUEDES, Rui M. e TITA, Volnei. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf. Acesso em: 09 nov. 2024.
APA
Vieira, A. F. C., Guedes, R. M., & Tita, V. (2013). Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
NLM
Vieira AFC, Guedes RM, Tita V. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
Vancouver
Vieira AFC, Guedes RM, Tita V. Viscoelastic-plastic constitutive models for biodegradable thermoplastics used to produce scaffolds [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/1474.pdf
Trabalho de evento
Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts (2013)
Mogaji, Taye Stephen; Ribatski, Gherhardt
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOGAJI, Taye Stephen e RIBATSKI, Gherhardt. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf. Acesso em: 09 nov. 2024.
APA
Mogaji, T. S., & Ribatski, G. (2013). Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
NLM
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
Vancouver
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
Trabalho de evento
Microinjection evaluation of a diamond turned diffraction optical element (2013)
Granado, Renê Mendes; Jasinevicius, Renato Goulart; Cirino, Giuseppe Antonio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: FERRAMENTAS, DIAMANTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, Renê Mendes e JASINEVICIUS, Renato Goulart e CIRINO, Giuseppe Antonio. Microinjection evaluation of a diamond turned diffraction optical element. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 nov. 2024.
APA
Granado, R. M., Jasinevicius, R. G., & Cirino, G. A. (2013). Microinjection evaluation of a diamond turned diffraction optical element. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ]
Vancouver
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ]
Trabalho de evento
A testbed for wireless networked control systems based on can and zigbee (2013)
Godoy, Eduardo Paciência; Oliveira, Thiago de Almeida; Diniz, Ivandro Severino; Porto, Arthur José Vieira
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: SENSOR, SISTEMAS DE CONTROLE, PROTOCOLOS DE COMUNICAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. A testbed for wireless networked control systems based on can and zigbee. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf. Acesso em: 09 nov. 2024.
APA
Godoy, E. P., Oliveira, T. de A., Diniz, I. S., & Porto, A. J. V. (2013). A testbed for wireless networked control systems based on can and zigbee. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
NLM
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Vancouver
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Trabalho de evento
Computational method for calculation of the specific cutting energy (2013)
Rigatti, Aldo Marcel Yoshida; Assis, Cleiton Lazaro Fazolo de; Coelho, Reginaldo Teixeira; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: MOAGEM, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIGATTI, Aldo Marcel Yoshida et al. Computational method for calculation of the specific cutting energy. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf. Acesso em: 09 nov. 2024.
APA
Rigatti, A. M. Y., Assis, C. L. F. de, Coelho, R. T., Jasinevicius, R. G., & Rodrigues, A. R. (2013). Computational method for calculation of the specific cutting energy. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
NLM
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
Vancouver
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
Trabalho de evento
Open loop response identification during non-stationary operation of actively controlled rotating systems (2013)
Felscher, Patrick; Dornbusch, Felix; Markert, Richard; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELSCHER, Patrick et al. Open loop response identification during non-stationary operation of actively controlled rotating systems. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf. Acesso em: 09 nov. 2024.
APA
Felscher, P., Dornbusch, F., Markert, R., & Nicoletti, R. (2013). Open loop response identification during non-stationary operation of actively controlled rotating systems. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
NLM
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Vancouver
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Trabalho de evento
Modeling and analysis of a cascade cryogenic refrigerator (2013)
Kanizawa, Fabio Toshio; Ribatski, Gherhardt
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: REFRIGERAÇÃO, SIMULAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KANIZAWA, Fabio Toshio e RIBATSKI, Gherhardt. Modeling and analysis of a cascade cryogenic refrigerator. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf. Acesso em: 09 nov. 2024.
APA
Kanizawa, F. T., & Ribatski, G. (2013). Modeling and analysis of a cascade cryogenic refrigerator. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
NLM
Kanizawa FT, Ribatski G. Modeling and analysis of a cascade cryogenic refrigerator [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
Vancouver
Kanizawa FT, Ribatski G. Modeling and analysis of a cascade cryogenic refrigerator [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
Trabalho de evento
Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts (2013)
Sampaio, Diego Luchesi; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, ENTROPIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAMPAIO, Diego Luchesi e NICOLETTI, Rodrigo. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf. Acesso em: 09 nov. 2024.
APA
Sampaio, D. L., & Nicoletti, R. (2013). Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
NLM
Sampaio DL, Nicoletti R. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
Vancouver
Sampaio DL, Nicoletti R. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
Trabalho de evento
Integrating a virtual environment and a real machining cell to remotely analyze the machining process (2011)
Vale, Heleno Murilo Campeão; Oliveira, Claiton; Porto, Arthur José Vieira
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: REALIDADE VIRTUAL, USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALE, Heleno Murilo Campeão e OLIVEIRA, Claiton e PORTO, Arthur José Vieira. Integrating a virtual environment and a real machining cell to remotely analyze the machining process. 2011, Anais.. Rio de Janeiro, RJ: ABCM, 2011. Disponível em: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF. Acesso em: 09 nov. 2024.
APA
Vale, H. M. C., Oliveira, C., & Porto, A. J. V. (2011). Integrating a virtual environment and a real machining cell to remotely analyze the machining process. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
NLM
Vale HMC, Oliveira C, Porto AJV. Integrating a virtual environment and a real machining cell to remotely analyze the machining process [Internet]. Proceedings of COBEM. 2011 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
Vancouver
Vale HMC, Oliveira C, Porto AJV. Integrating a virtual environment and a real machining cell to remotely analyze the machining process [Internet]. Proceedings of COBEM. 2011 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
Trabalho de evento
Using simulation tools in the development of a networked control systems research platform (2009)
Godoy, Eduardo Paciência; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: FERRAMENTAS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e PORTO, Arthur José Vieira e INAMASU, Ricardo Yassushi. Using simulation tools in the development of a networked control systems research platform. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf. Acesso em: 09 nov. 2024.
APA
Godoy, E. P., Porto, A. J. V., & Inamasu, R. Y. (2009). Using simulation tools in the development of a networked control systems research platform. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
NLM
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
Vancouver
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 nov. 09 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
Trabalho de evento
Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery (2009)
Pereira, Robson Rogério Dutra; Godoy, Eduardo Paciência; Sakai, Rodrigo Martins Romeira; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MÁQUINAS AGRÍCOLAS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf. Acesso em: 09 nov. 2024.
APA
Pereira, R. R. D., Godoy, E. P., Sakai, R. M. R., Porto, A. J. V., & Inamasu, R. Y. (2009). Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
NLM
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
Vancouver
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
Trabalho de evento
Variable mass systems dynamics in engineering mechanics education (2007)
Pesce, Celso Pupo ; Casetta, Leonardo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: ENGENHARIA MECÂNICA, MECÂNICA CLÁSSICA, EQUAÇÕES, EDUCAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PESCE, Celso Pupo e CASETTA, Leonardo. Variable mass systems dynamics in engineering mechanics education. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/039a1e43-8f7f-4830-b606-c6820a4b7662/Pesce-2007-Variable%20mass%20systems%20dynamics%20in%20engineering%20mechanics%20education.pdf. Acesso em: 09 nov. 2024.
APA
Pesce, C. P., & Casetta, L. (2007). Variable mass systems dynamics in engineering mechanics education. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/039a1e43-8f7f-4830-b606-c6820a4b7662/Pesce-2007-Variable%20mass%20systems%20dynamics%20in%20engineering%20mechanics%20education.pdf
NLM
Pesce CP, Casetta L. Variable mass systems dynamics in engineering mechanics education [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/039a1e43-8f7f-4830-b606-c6820a4b7662/Pesce-2007-Variable%20mass%20systems%20dynamics%20in%20engineering%20mechanics%20education.pdf
Vancouver
Pesce CP, Casetta L. Variable mass systems dynamics in engineering mechanics education [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 09 ] Available from: https://repositorio.usp.br/directbitstream/039a1e43-8f7f-4830-b606-c6820a4b7662/Pesce-2007-Variable%20mass%20systems%20dynamics%20in%20engineering%20mechanics%20education.pdf
Trabalho de evento
Proposal of a CAN-based distributed control system for variable rate technology in agricultural machinery (2007)
Pereira, Robson Rogério Dutra; Godoy, Eduardo Paciência; Sousa, Rafael Vieira de; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, MÁQUINAS AGRÍCOLAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Proposal of a CAN-based distributed control system for variable rate technology in agricultural machinery. 2007, Anais.. Rio de Janeiro, RJ: ABCM, 2007. Disponível em: http://abcm.org.br/anais/cobem/2007/pdf/COBEM2007-2284.pdf. Acesso em: 09 nov. 2024.
APA
Pereira, R. R. D., Godoy, E. P., Sousa, R. V. de, Porto, A. J. V., & Inamasu, R. Y. (2007). Proposal of a CAN-based distributed control system for variable rate technology in agricultural machinery. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2007/pdf/COBEM2007-2284.pdf
NLM
Pereira RRD, Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Proposal of a CAN-based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/anais/cobem/2007/pdf/COBEM2007-2284.pdf
Vancouver
Pereira RRD, Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Proposal of a CAN-based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 nov. 09 ] Available from: http://abcm.org.br/anais/cobem/2007/pdf/COBEM2007-2284.pdf

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Subjects