ReP USP - Resultado da busca

Artigo de periodico
Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers (2014)
Santos, Sérgio Francisco dos; Rodrigues, José Anchieta; Tonoli, Gustavo Henrique Denzin; Almeida, Alessandra Etuko Feuzicana de Souza; Savastano Júnior, Holmer
Source: Journal of Materials Science. Unidade: FZEA
Subjects: CIMENTO REFORÇADO COM FIBRAS, FIBROCIMENTO (PROPRIEDADES MECÂNICAS), MATERIAIS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Sérgio Francisco dos et al. Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers. Journal of Materials Science, v. No 2014, n. 21, p. 7497-7506, 2014Tradução . . Disponível em: https://doi.org/10.1007/s10853-014-8455-1. Acesso em: 23 abr. 2024.
APA
Santos, S. F. dos, Rodrigues, J. A., Tonoli, G. H. D., Almeida, A. E. F. de S., & Savastano Júnior, H. (2014). Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers. Journal of Materials Science, No 2014( 21), 7497-7506. doi:10.1007/s10853-014-8455-1
NLM
Santos SF dos, Rodrigues JA, Tonoli GHD, Almeida AEF de S, Savastano Júnior H. Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers [Internet]. Journal of Materials Science. 2014 ; No 2014( 21): 7497-7506.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-014-8455-1
Vancouver
Santos SF dos, Rodrigues JA, Tonoli GHD, Almeida AEF de S, Savastano Júnior H. Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers [Internet]. Journal of Materials Science. 2014 ; No 2014( 21): 7497-7506.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-014-8455-1
Artigo de periodico
Impact of bleaching pine fibre on the fibre/cement interface (2012)
Tonoli, G. H. D.; Belgacem, M. N.; Bras, J.; Silva, Marcelo de Assumpção Pereira da ; Lahr, Francisco Antonio Rocco; Savastano Júnior, Holmer
Source: Journal of Materials Science. Unidades: IFSC, EESC, FZEA
Subjects: FIBRAS VEGETAIS, CIMENTO (EXPERIMENTAÇÃO), MATERIAIS (DESENVOLVIMENTO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TONOLI, G. H. D. et al. Impact of bleaching pine fibre on the fibre/cement interface. Journal of Materials Science, v. 47, n. 9, p. 4167-4177, 2012Tradução . . Disponível em: https://doi.org/10.1007/s10853-012-6271-z. Acesso em: 23 abr. 2024.
APA
Tonoli, G. H. D., Belgacem, M. N., Bras, J., Silva, M. de A. P. da, Lahr, F. A. R., & Savastano Júnior, H. (2012). Impact of bleaching pine fibre on the fibre/cement interface. Journal of Materials Science, 47( 9), 4167-4177. doi:10.1007/s10853-012-6271-z
NLM
Tonoli GHD, Belgacem MN, Bras J, Silva M de AP da, Lahr FAR, Savastano Júnior H. Impact of bleaching pine fibre on the fibre/cement interface [Internet]. Journal of Materials Science. 2012 ; 47( 9): 4167-4177.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-012-6271-z
Vancouver
Tonoli GHD, Belgacem MN, Bras J, Silva M de AP da, Lahr FAR, Savastano Júnior H. Impact of bleaching pine fibre on the fibre/cement interface [Internet]. Journal of Materials Science. 2012 ; 47( 9): 4167-4177.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-012-6271-z
Artigo de periodico
Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering (2012)
Saska, Sybele; Scarel-Caminaga, Raquel Mantuaneli; Teixeira, Lucas Novaes; Franchi, Leonardo Pereira; Santos, Raquel Alves dos; Gaspar, Ana Maria Minarelli; Oliveira, Paulo Tambasco de; Rosa, Adalberto Luiz; Takahashi, Catarina Satie; Messaddeq, Younès; Ribeiro, Sidney José Lima; Marchetto, Reinaldo
Source: Journal of Materials Science. Unidades: FORP, FFCLRP
Subjects: CELULOSE, BACTÉRIAS, MEMBRANAS (ANATOMIA), MICROSCOPIA ELETRÔNICA DE VARREDURA, CÉLULAS CULTIVADAS, PEPTÍDEOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SASKA, Sybele et al. Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering. Journal of Materials Science, v. 23, n. 9, p. 2253-2266, 2012Tradução . . Disponível em: https://doi.org/10.1007/s10856-012-4676-5. Acesso em: 23 abr. 2024.
APA
Saska, S., Scarel-Caminaga, R. M., Teixeira, L. N., Franchi, L. P., Santos, R. A. dos, Gaspar, A. M. M., et al. (2012). Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering. Journal of Materials Science, 23( 9), 2253-2266. doi:10.1007/s10856-012-4676-5
NLM
Saska S, Scarel-Caminaga RM, Teixeira LN, Franchi LP, Santos RA dos, Gaspar AMM, Oliveira PT de, Rosa AL, Takahashi CS, Messaddeq Y, Ribeiro SJL, Marchetto R. Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering [Internet]. Journal of Materials Science. 2012 ; 23( 9): 2253-2266.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10856-012-4676-5
Vancouver
Saska S, Scarel-Caminaga RM, Teixeira LN, Franchi LP, Santos RA dos, Gaspar AMM, Oliveira PT de, Rosa AL, Takahashi CS, Messaddeq Y, Ribeiro SJL, Marchetto R. Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering [Internet]. Journal of Materials Science. 2012 ; 23( 9): 2253-2266.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10856-012-4676-5
Artigo de periodico
Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass (2012)
Bhakta, Shashwat; Faira, Paulo E.; Salata, Luiz Antonio; Oliveira Neto, Patricio José de; Miller, Cheryl A.; van Noort, Richard; Reaney, Ian M.; Brook, Ian M.; Hatton, Paul V.
Source: Journal of Materials Science. Unidade: FORP
Subjects: BIOMATERIAIS, MATERIAIS ORTODÔNTICOS, OSSEOINTEGRAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BHAKTA, Shashwat et al. Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass. Journal of Materials Science, v. 23, n. 10, p. 2521- 2529, 2012Tradução . . Disponível em: https://doi.org/10.1007/s10856-012-4707-2. Acesso em: 23 abr. 2024.
APA
Bhakta, S., Faira, P. E., Salata, L. A., Oliveira Neto, P. J. de, Miller, C. A., van Noort, R., et al. (2012). Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass. Journal of Materials Science, 23( 10), 2521- 2529. doi:10.1007/s10856-012-4707-2
NLM
Bhakta S, Faira PE, Salata LA, Oliveira Neto PJ de, Miller CA, van Noort R, Reaney IM, Brook IM, Hatton PV. Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass [Internet]. Journal of Materials Science. 2012 ; 23( 10): 2521- 2529.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10856-012-4707-2
Vancouver
Bhakta S, Faira PE, Salata LA, Oliveira Neto PJ de, Miller CA, van Noort R, Reaney IM, Brook IM, Hatton PV. Determination of relative in vivo osteoconductivity of modified potassium fluorrichterite glass-ceramics compared with 45S5 bioglass [Internet]. Journal of Materials Science. 2012 ; 23( 10): 2521- 2529.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10856-012-4707-2
Artigo de periodico
Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites (2012)
Tan, T; Santos, Sérgio Francisco dos; Savastano Júnior, Holmer; Soboyejo, W. O
Source: Journal of Materials Science. Unidade: FZEA
Subjects: FIBRAS NATURAIS, CIMENTO REFORÇADO COM FIBRAS, MATERIAIS COMPÓSITOS DE FIBRAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAN, T et al. Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites. Journal of Materials Science, v. 47, n. 6, p. 2864-2874, 2012Tradução . . Disponível em: https://doi.org/10.1007/s10853-011-6116-1. Acesso em: 23 abr. 2024.
APA
Tan, T., Santos, S. F. dos, Savastano Júnior, H., & Soboyejo, W. O. (2012). Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites. Journal of Materials Science, 47( 6), 2864-2874. doi:10.1007/s10853-011-6116-1
NLM
Tan T, Santos SF dos, Savastano Júnior H, Soboyejo WO. Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites [Internet]. Journal of Materials Science. 2012 ; 47( 6): 2864-2874.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-011-6116-1
Vancouver
Tan T, Santos SF dos, Savastano Júnior H, Soboyejo WO. Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites [Internet]. Journal of Materials Science. 2012 ; 47( 6): 2864-2874.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-011-6116-1
Artigo de periodico
The renaissance of unsuported nanostructured catalysts for low-temperaarture fuel cells: from the size to the shape of metal nanostructures (2011)
Antolini, Ermete; Perez, Joelma
Source: Journal of Materials Science. Unidade: IQSC
Assunto: ETANOL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANTOLINI, Ermete e PEREZ, Joelma. The renaissance of unsuported nanostructured catalysts for low-temperaarture fuel cells: from the size to the shape of metal nanostructures. Journal of Materials Science, v. 46, n. 13, p. 4435-4457, 2011Tradução . . Disponível em: https://doi.org/10.1007/s10853-011-5499-3. Acesso em: 23 abr. 2024.
APA
Antolini, E., & Perez, J. (2011). The renaissance of unsuported nanostructured catalysts for low-temperaarture fuel cells: from the size to the shape of metal nanostructures. Journal of Materials Science, 46( 13), 4435-4457. doi:10.1007/s10853-011-5499-3
NLM
Antolini E, Perez J. The renaissance of unsuported nanostructured catalysts for low-temperaarture fuel cells: from the size to the shape of metal nanostructures [Internet]. Journal of Materials Science. 2011 ; 46( 13): 4435-4457.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-011-5499-3
Vancouver
Antolini E, Perez J. The renaissance of unsuported nanostructured catalysts for low-temperaarture fuel cells: from the size to the shape of metal nanostructures [Internet]. Journal of Materials Science. 2011 ; 46( 13): 4435-4457.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-011-5499-3
Artigo de periodico
Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis (2011)
Condeles, J. F.; Mulato, Marcelo
Source: Journal of Materials Science. Unidade: FFCLRP
Assunto: FILMES FINOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDELES, J. F. e MULATO, Marcelo. Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis. Journal of Materials Science, v. 46, n. 5, p. 1462-1468, 2011Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4947-9. Acesso em: 23 abr. 2024.
APA
Condeles, J. F., & Mulato, M. (2011). Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis. Journal of Materials Science, 46( 5), 1462-1468. doi:10.1007/s10853-010-4947-9
NLM
Condeles JF, Mulato M. Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis [Internet]. Journal of Materials Science. 2011 ; 46( 5): 1462-1468.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4947-9
Vancouver
Condeles JF, Mulato M. Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis [Internet]. Journal of Materials Science. 2011 ; 46( 5): 1462-1468.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4947-9
Artigo de periodico
Thermally evaporated thallium bromide films fabricated at varied substrate temperatures (2011)
Destefano, N.; Mulato, Marcelo
Source: Journal of Materials Science. Unidade: FFCLRP
Subjects: MICROSCOPIA ELETRÔNICA DE VARREDURA, BROMO, FILMES FINOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DESTEFANO, N. e MULATO, Marcelo. Thermally evaporated thallium bromide films fabricated at varied substrate temperatures. Journal of Materials Science, v. 46, n. 7, p. 2229-2234, 2011Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-5061-8. Acesso em: 23 abr. 2024.
APA
Destefano, N., & Mulato, M. (2011). Thermally evaporated thallium bromide films fabricated at varied substrate temperatures. Journal of Materials Science, 46( 7), 2229-2234. doi:10.1007/s10853-010-5061-8
NLM
Destefano N, Mulato M. Thermally evaporated thallium bromide films fabricated at varied substrate temperatures [Internet]. Journal of Materials Science. 2011 ; 46( 7): 2229-2234.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-5061-8
Vancouver
Destefano N, Mulato M. Thermally evaporated thallium bromide films fabricated at varied substrate temperatures [Internet]. Journal of Materials Science. 2011 ; 46( 7): 2229-2234.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-5061-8
Artigo de periodico
Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor (2010)
Batista, Pablo Diniz; Mulato, Marcelo
Source: Journal of Materials Science. Unidade: FFCLRP
Subjects: FILMES FINOS, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATISTA, Pablo Diniz e MULATO, Marcelo. Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor. Journal of Materials Science, v. 45, n. 20, p. 5478-5481, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4603-4. Acesso em: 23 abr. 2024.
APA
Batista, P. D., & Mulato, M. (2010). Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor. Journal of Materials Science, 45( 20), 5478-5481. doi:10.1007/s10853-010-4603-4
NLM
Batista PD, Mulato M. Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor [Internet]. Journal of Materials Science. 2010 ; 45( 20): 5478-5481.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4603-4
Vancouver
Batista PD, Mulato M. Polycrystalline fluorine-doped tin oxide as sensoring thin film in EGFET pH sensor [Internet]. Journal of Materials Science. 2010 ; 45( 20): 5478-5481.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4603-4
Artigo de periodico
The effects of temperature on the molecular orientation of zinc phthalocyanine films (2010)
Gaffo, Luciana; Cordeiro, Márcia R.; Freitas, Adonilson R.; Moreira, Wania C.; Girotto, Emerson M.; Zucolotto, Valtencir
Source: Journal of Materials Science. Unidade: IFSC
Subjects: FILMES FINOS, ÓPTICA (PROPRIEDADES), ESPECTROSCOPIA RAMAN, ZINCO (ESTUDO), SENSOR (DESENVOLVIMENTO), TEMPERATURA (EFEITOS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GAFFO, Luciana et al. The effects of temperature on the molecular orientation of zinc phthalocyanine films. Journal of Materials Science, v. 45, n. 5, p. 1366-1370, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-009-4094-3. Acesso em: 23 abr. 2024.
APA
Gaffo, L., Cordeiro, M. R., Freitas, A. R., Moreira, W. C., Girotto, E. M., & Zucolotto, V. (2010). The effects of temperature on the molecular orientation of zinc phthalocyanine films. Journal of Materials Science, 45( 5), 1366-1370. doi:10.1007/s10853-009-4094-3
NLM
Gaffo L, Cordeiro MR, Freitas AR, Moreira WC, Girotto EM, Zucolotto V. The effects of temperature on the molecular orientation of zinc phthalocyanine films [Internet]. Journal of Materials Science. 2010 ; 45( 5): 1366-1370.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-4094-3
Vancouver
Gaffo L, Cordeiro MR, Freitas AR, Moreira WC, Girotto EM, Zucolotto V. The effects of temperature on the molecular orientation of zinc phthalocyanine films [Internet]. Journal of Materials Science. 2010 ; 45( 5): 1366-1370.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-4094-3
Artigo de periodico
Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel (2010)
Monlevade, Eduardo Franco de ; Goldenstein, Hélio ; Falleiros, Ivan Gilberto Sandoval
Source: Journal of Materials Science. Unidade: EP
Subjects: AÇO INOXIDÁVEL DUPLEX, DIAGRAMA DE TRANSFORMAÇÃO DE FASE, CRISTALOGRAFIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONLEVADE, Eduardo Franco de e GOLDENSTEIN, Hélio e FALLEIROS, Ivan Gilberto Sandoval. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel. Journal of Materials Science, v. 45, n. 18, p. 5089-5093, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4468-6. Acesso em: 23 abr. 2024.
APA
Monlevade, E. F. de, Goldenstein, H., & Falleiros, I. G. S. (2010). Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel. Journal of Materials Science, 45( 18), 5089-5093. doi:10.1007/s10853-010-4468-6
NLM
Monlevade EF de, Goldenstein H, Falleiros IGS. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel [Internet]. Journal of Materials Science. 2010 ; 45( 18): 5089-5093.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4468-6
Vancouver
Monlevade EF de, Goldenstein H, Falleiros IGS. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel [Internet]. Journal of Materials Science. 2010 ; 45( 18): 5089-5093.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4468-6
Artigo de periodico
Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys (2010)
Malafaia, Artur Mariano de Sousa; Milan, Marcelo Tadeu; Maluf, Omar; Muñoz Riofano, Rosamel Melita; Oliveira, Marcelo Falcão de
Source: Journal of Materials Science. Unidade: EESC
Subjects: DESGASTE ABRASIVO, AÇO INOXIDÁVEL AUSTENÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa et al. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys. Journal of Materials Science, v. 45, n. 19, p. 5393-5397, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4591-4. Acesso em: 23 abr. 2024.
APA
Malafaia, A. M. de S., Milan, M. T., Maluf, O., Muñoz Riofano, R. M., & Oliveira, M. F. de. (2010). Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys. Journal of Materials Science, 45( 19), 5393-5397. doi:10.1007/s10853-010-4591-4
NLM
Malafaia AM de S, Milan MT, Maluf O, Muñoz Riofano RM, Oliveira MF de. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys [Internet]. Journal of Materials Science. 2010 ; 45( 19): 5393-5397.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4591-4
Vancouver
Malafaia AM de S, Milan MT, Maluf O, Muñoz Riofano RM, Oliveira MF de. Oxidation and abrasive wear of 'FE'-'SI' and 'FE'-'AL' intermetallic alloys [Internet]. Journal of Materials Science. 2010 ; 45( 19): 5393-5397.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4591-4
Artigo de periodico
High-density gas aggregation nanoparticle gun applied to the production of SmCo clusters (2010)
Landi, G T; Santos, A. D.
Source: Journal of Materials Science. Unidade: IF
Assunto: NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LANDI, G T e SANTOS, A. D. High-density gas aggregation nanoparticle gun applied to the production of SmCo clusters. Journal of Materials Science, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4271-4. Acesso em: 23 abr. 2024.
APA
Landi, G. T., & Santos, A. D. (2010). High-density gas aggregation nanoparticle gun applied to the production of SmCo clusters. Journal of Materials Science. doi:10.1007/s10853-010-4271-4
NLM
Landi GT, Santos AD. High-density gas aggregation nanoparticle gun applied to the production of SmCo clusters [Internet]. Journal of Materials Science. 2010 ;[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4271-4
Vancouver
Landi GT, Santos AD. High-density gas aggregation nanoparticle gun applied to the production of SmCo clusters [Internet]. Journal of Materials Science. 2010 ;[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-010-4271-4
Artigo de periodico
Microstructure and texture assessment of Al- Mn- Fe- Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes (2009)
Martins, J. P.; Carvalho, A. L. M.; Padilha, Angelo Fernando
Source: Journal of Materials Science. Unidade: EP
Subjects: TEXTURA, ALUMÍNIO, LIGAS NÃO FERROSAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, J. P. e CARVALHO, A. L. M. e PADILHA, Angelo Fernando. Microstructure and texture assessment of Al- Mn- Fe- Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes. Journal of Materials Science, v. 44, p. 2966-2976, 2009Tradução . . Disponível em: https://doi.org/10.1007/s10853-009-3393-z. Acesso em: 23 abr. 2024.
APA
Martins, J. P., Carvalho, A. L. M., & Padilha, A. F. (2009). Microstructure and texture assessment of Al- Mn- Fe- Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes. Journal of Materials Science, 44, 2966-2976. doi:10.1007/s10853-009-3393-z
NLM
Martins JP, Carvalho ALM, Padilha AF. Microstructure and texture assessment of Al- Mn- Fe- Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes [Internet]. Journal of Materials Science. 2009 ; 44 2966-2976.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-3393-z
Vancouver
Martins JP, Carvalho ALM, Padilha AF. Microstructure and texture assessment of Al- Mn- Fe- Si (3003) aluminum alloy produced by continuous and semicontinuous casting processes [Internet]. Journal of Materials Science. 2009 ; 44 2966-2976.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-3393-z
Artigo de periodico
High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic (2009)
Yoshimura, Humberto Naoyuki ; Narita, Nilson Eiji; Molisani, André Luiz; Goldenstein, Hélio
Source: Journal of Materials Science. Unidade: EP
Subjects: ALTA TEMPERATURA, CERÂMICA, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
YOSHIMURA, Humberto Naoyuki et al. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic. Journal of Materials Science, v. 44, n. 21, p. 5773-5780, 2009Tradução . . Disponível em: https://doi.org/10.1007/s10853-009-3809-9. Acesso em: 23 abr. 2024.
APA
Yoshimura, H. N., Narita, N. E., Molisani, A. L., & Goldenstein, H. (2009). High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic. Journal of Materials Science, 44( 21), 5773-5780. doi:10.1007/s10853-009-3809-9
NLM
Yoshimura HN, Narita NE, Molisani AL, Goldenstein H. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic [Internet]. Journal of Materials Science. 2009 ; 44( 21): 5773-5780.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-3809-9
Vancouver
Yoshimura HN, Narita NE, Molisani AL, Goldenstein H. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic [Internet]. Journal of Materials Science. 2009 ; 44( 21): 5773-5780.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-009-3809-9
Artigo de periodico
Electrophoretic deposition of ZrO2Y2O3: a bi-component study concerning self-assemblies (2009)
Castro, Ricardo Hauch Ribeiro de ; Kodama, Paulo K; Gouvêa, Douglas ; Muccillo, Reginaldo
Source: Journal of Materials Science. Unidade: EP
Subjects: QUÍMICA COLOIDAL, CERÂMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTRO, Ricardo Hauch Ribeiro de et al. Electrophoretic deposition of ZrO2Y2O3: a bi-component study concerning self-assemblies. Journal of Materials Science, v. 44, n. 7, p. 1851-1857, 2009Tradução . . Disponível em: https://doi.org/10.1007/s10853-008-3240-7. Acesso em: 23 abr. 2024.
APA
Castro, R. H. R. de, Kodama, P. K., Gouvêa, D., & Muccillo, R. (2009). Electrophoretic deposition of ZrO2Y2O3: a bi-component study concerning self-assemblies. Journal of Materials Science, 44( 7), 1851-1857. doi:10.1007/s10853-008-3240-7
NLM
Castro RHR de, Kodama PK, Gouvêa D, Muccillo R. Electrophoretic deposition of ZrO2Y2O3: a bi-component study concerning self-assemblies [Internet]. Journal of Materials Science. 2009 ;44( 7): 1851-1857.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-008-3240-7
Vancouver
Castro RHR de, Kodama PK, Gouvêa D, Muccillo R. Electrophoretic deposition of ZrO2Y2O3: a bi-component study concerning self-assemblies [Internet]. Journal of Materials Science. 2009 ;44( 7): 1851-1857.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-008-3240-7
Artigo de periodico
Effect of alpha prime due to 475°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels (2008)
Terada, Maysa ; Hupalo, Marcio Ferreira ; Costa, Isolda ; Padilha, Angelo Fernando
Source: Journal of Materials Science. Unidades: EP, IPEN
Subjects: CORROSÃO, AÇO INOXIDÁVEL FERRÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TERADA, Maysa et al. Effect of alpha prime due to 475°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels. Journal of Materials Science, v. 43, n. 2, p. 425-433, 2008Tradução . . Disponível em: https://doi.org/10.1007/s10853-007-1929-7. Acesso em: 23 abr. 2024.
APA
Terada, M., Hupalo, M. F., Costa, I., & Padilha, A. F. (2008). Effect of alpha prime due to 475°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels. Journal of Materials Science, 43( 2), 425-433. doi:10.1007/s10853-007-1929-7
NLM
Terada M, Hupalo MF, Costa I, Padilha AF. Effect of alpha prime due to 475°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels [Internet]. Journal of Materials Science. 2008 ; 43( 2): 425-433.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1929-7
Vancouver
Terada M, Hupalo MF, Costa I, Padilha AF. Effect of alpha prime due to 475°C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels [Internet]. Journal of Materials Science. 2008 ; 43( 2): 425-433.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1929-7
Artigo de periodico
Optical and structural properties of Pb'I IND.2' thin films (2008)
Condeles, J. F.; Ando, Rômulo Augusto ; Mulato, Marcelo
Source: Journal of Materials Science. Unidade: FFCLRP
Assunto: SEMICONDUTORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDELES, J. F. e ANDO, Rômulo Augusto e MULATO, Marcelo. Optical and structural properties of Pb'I IND.2' thin films. Journal of Materials Science, v. 43, n. 2, p. 525-529, 2008Tradução . . Acesso em: 23 abr. 2024.
APA
Condeles, J. F., Ando, R. A., & Mulato, M. (2008). Optical and structural properties of Pb'I IND.2' thin films. Journal of Materials Science, 43( 2), 525-529.
NLM
Condeles JF, Ando RA, Mulato M. Optical and structural properties of Pb'I IND.2' thin films. Journal of Materials Science. 2008 ; 43( 2): 525-529.[citado 2024 abr. 23 ]
Vancouver
Condeles JF, Ando RA, Mulato M. Optical and structural properties of Pb'I IND.2' thin films. Journal of Materials Science. 2008 ; 43( 2): 525-529.[citado 2024 abr. 23 ]
Artigo de periodico
Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy (2008)
Santos, Sydney Ferreira; Castro, José Fernando R. de; Ishikawa, Tomaz Toshimi; Ticianelli, Edson Antonio
Source: Journal of Materials Science. Unidade: IQSC
Assunto: ELETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Sydney Ferreira et al. Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy. Journal of Materials Science, v. 43, n. 8, p. 2889-2894, 2008Tradução . . Disponível em: https://doi.org/10.1007/s10853-007-1924-z. Acesso em: 23 abr. 2024.
APA
Santos, S. F., Castro, J. F. R. de, Ishikawa, T. T., & Ticianelli, E. A. (2008). Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy. Journal of Materials Science, 43( 8), 2889-2894. doi:10.1007/s10853-007-1924-z
NLM
Santos SF, Castro JFR de, Ishikawa TT, Ticianelli EA. Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy [Internet]. Journal of Materials Science. 2008 ; 43( 8): 2889-2894.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1924-z
Vancouver
Santos SF, Castro JFR de, Ishikawa TT, Ticianelli EA. Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy [Internet]. Journal of Materials Science. 2008 ; 43( 8): 2889-2894.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1924-z
Artigo de periodico
Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths (2008)
Schuler, Tunísia Eufrausino ; Wang, Shu Hui ; Possidonio, Shirley; Onmori, Roberto Koji
Source: Journal of Materials Science. Unidade: EP
Subjects: POLIMERIZAÇÃO, SEMICONDUTORES, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHULER, Tunísia Eufrausino et al. Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths. Journal of Materials Science, v. 43, n. 2, p. 541-545, 2008Tradução . . Disponível em: https://doi.org/10.1007/s10853-007-1710-y. Acesso em: 23 abr. 2024.
APA
Schuler, T. E., Wang, S. H., Possidonio, S., & Onmori, R. K. (2008). Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths. Journal of Materials Science, 43( 2), 541-545. doi:10.1007/s10853-007-1710-y
NLM
Schuler TE, Wang SH, Possidonio S, Onmori RK. Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths [Internet]. Journal of Materials Science. 2008 ; 43( 2): 541-545.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1710-y
Vancouver
Schuler TE, Wang SH, Possidonio S, Onmori RK. Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths [Internet]. Journal of Materials Science. 2008 ; 43( 2): 541-545.[citado 2024 abr. 23 ] Available from: https://doi.org/10.1007/s10853-007-1710-y

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration