ReP USP - Resultado da busca

Artigo de periodico
Structural pieces rehabilitation with self-tapping screws (2017)
Macedo, Laurenn Borges de; Balanco, Giovana Gobatto; Santos, Nathan Alves dos; Marini, Lucas José; Arroyo, Felipe Nascimento; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: PARAFUSOS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Laurenn Borges de et al. Structural pieces rehabilitation with self-tapping screws. International Journal of Materials Engineering, v. 7, n. 5, p. 83-87, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170705.01. Acesso em: 18 abr. 2024.
APA
Macedo, L. B. de, Balanco, G. G., Santos, N. A. dos, Marini, L. J., Arroyo, F. N., Christoforo, A. L., & Lahr, F. A. R. (2017). Structural pieces rehabilitation with self-tapping screws. International Journal of Materials Engineering, 7( 5), 83-87. doi:10.5923/j.ijme.20170705.01
NLM
Macedo LB de, Balanco GG, Santos NA dos, Marini LJ, Arroyo FN, Christoforo AL, Lahr FAR. Structural pieces rehabilitation with self-tapping screws [Internet]. International Journal of Materials Engineering. 2017 ; 7( 5): 83-87.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170705.01
Vancouver
Macedo LB de, Balanco GG, Santos NA dos, Marini LJ, Arroyo FN, Christoforo AL, Lahr FAR. Structural pieces rehabilitation with self-tapping screws [Internet]. International Journal of Materials Engineering. 2017 ; 7( 5): 83-87.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170705.01
Artigo de periodico
Characteristics value estimate of steel bar anchor strength by mean response confidence interval (2017)
Pigozzo, Julio Cézar; Martinez Espinosa, Mariano; Calil Júnior, Carlito; Arroyo, Felipe Nascimento; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: AÇO, ANCORAGEM, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio Cézar et al. Characteristics value estimate of steel bar anchor strength by mean response confidence interval. International Journal of Materials Engineering, v. 7, n. 6, p. 111-116, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170706.02. Acesso em: 18 abr. 2024.
APA
Pigozzo, J. C., Martinez Espinosa, M., Calil Júnior, C., Arroyo, F. N., Christoforo, A. L., & Lahr, F. A. R. (2017). Characteristics value estimate of steel bar anchor strength by mean response confidence interval. International Journal of Materials Engineering, 7( 6), 111-116. doi:10.5923/j.ijme.20170706.02
NLM
Pigozzo JC, Martinez Espinosa M, Calil Júnior C, Arroyo FN, Christoforo AL, Lahr FAR. Characteristics value estimate of steel bar anchor strength by mean response confidence interval [Internet]. International Journal of Materials Engineering. 2017 ; 7( 6): 111-116.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170706.02
Vancouver
Pigozzo JC, Martinez Espinosa M, Calil Júnior C, Arroyo FN, Christoforo AL, Lahr FAR. Characteristics value estimate of steel bar anchor strength by mean response confidence interval [Internet]. International Journal of Materials Engineering. 2017 ; 7( 6): 111-116.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170706.02
Artigo de periodico
Dimensioning of isolated footing submitted to the under biaxial bending considering the low concrete consumption (2017)
França Filho, Wanderson Luiz de; Carvalho, Roberto Chust; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Assunto: CONCRETO ARMADO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FRANÇA FILHO, Wanderson Luiz de et al. Dimensioning of isolated footing submitted to the under biaxial bending considering the low concrete consumption. International Journal of Materials Engineering, v. 7, n. 1, p. 1-11, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170701.01. Acesso em: 18 abr. 2024.
APA
França Filho, W. L. de, Carvalho, R. C., Christoforo, A. L., & Lahr, F. A. R. (2017). Dimensioning of isolated footing submitted to the under biaxial bending considering the low concrete consumption. International Journal of Materials Engineering, 7( 1), 1-11. doi:10.5923/j.ijme.20170701.01
NLM
França Filho WL de, Carvalho RC, Christoforo AL, Lahr FAR. Dimensioning of isolated footing submitted to the under biaxial bending considering the low concrete consumption [Internet]. International Journal of Materials Engineering. 2017 ; 7( 1): 1-11.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170701.01
Vancouver
França Filho WL de, Carvalho RC, Christoforo AL, Lahr FAR. Dimensioning of isolated footing submitted to the under biaxial bending considering the low concrete consumption [Internet]. International Journal of Materials Engineering. 2017 ; 7( 1): 1-11.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170701.01
Artigo de periodico
A preliminary study about the utilization of cajueiro and amescla for MDP panels production (2017)
Freitas, Jonathan Francisco de; Souza, Amós Magalhães de; Granco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: PAINÉIS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Jonathan Francisco de et al. A preliminary study about the utilization of cajueiro and amescla for MDP panels production. International Journal of Materials Engineering, v. 7, n. 2, p. 21-24, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170702.01. Acesso em: 18 abr. 2024.
APA
Freitas, J. F. de, Souza, A. M. de, Granco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2017). A preliminary study about the utilization of cajueiro and amescla for MDP panels production. International Journal of Materials Engineering, 7( 2), 21-24. doi:10.5923/j.ijme.20170702.01
NLM
Freitas JF de, Souza AM de, Granco LAMN, Chahud E, Christoforo AL, Lahr FAR. A preliminary study about the utilization of cajueiro and amescla for MDP panels production [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 21-24.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170702.01
Vancouver
Freitas JF de, Souza AM de, Granco LAMN, Chahud E, Christoforo AL, Lahr FAR. A preliminary study about the utilization of cajueiro and amescla for MDP panels production [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 21-24.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170702.01
Artigo de periodico
Alternative woods in framework arc for pedestrian footbridge abstract reference full-text pdf (2017)
Garcia, Douglas Rafael Juvenil; Leão, Érika Borges; Pinheiro, Roberto Vasconcelos; Almeida, Diego Henrique; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: ESTRUTURAS DE MADEIRA, PASSARELAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARCIA, Douglas Rafael Juvenil et al. Alternative woods in framework arc for pedestrian footbridge abstract reference full-text pdf. International Journal of Materials Engineering, v. 7, n. 4, p. 68-76, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170704.02. Acesso em: 18 abr. 2024.
APA
Garcia, D. R. J., Leão, É. B., Pinheiro, R. V., Almeida, D. H., Christoforo, A. L., & Lahr, F. A. R. (2017). Alternative woods in framework arc for pedestrian footbridge abstract reference full-text pdf. International Journal of Materials Engineering, 7( 4), 68-76. doi:10.5923/j.ijme.20170704.02
NLM
Garcia DRJ, Leão ÉB, Pinheiro RV, Almeida DH, Christoforo AL, Lahr FAR. Alternative woods in framework arc for pedestrian footbridge abstract reference full-text pdf [Internet]. International Journal of Materials Engineering. 2017 ; 7( 4): 68-76.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170704.02
Vancouver
Garcia DRJ, Leão ÉB, Pinheiro RV, Almeida DH, Christoforo AL, Lahr FAR. Alternative woods in framework arc for pedestrian footbridge abstract reference full-text pdf [Internet]. International Journal of Materials Engineering. 2017 ; 7( 4): 68-76.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170704.02
Artigo de periodico
Cracks studies case of buildings in Sinop city - Brazil (2017)
Santos, Bruno Rodrigues dos; Pinheiro, Roberto Vasconcelos; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: EDIFÍCIOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Bruno Rodrigues dos et al. Cracks studies case of buildings in Sinop city - Brazil. International Journal of Materials Engineering, v. 7, n. 6, p. 101-110, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170706.01. Acesso em: 18 abr. 2024.
APA
Santos, B. R. dos, Pinheiro, R. V., Arroyo, F. N., Almeida, D. H. de, Christoforo, A. L., & Lahr, F. A. R. (2017). Cracks studies case of buildings in Sinop city - Brazil. International Journal of Materials Engineering, 7( 6), 101-110. doi:10.5923/j.ijme.20170706.01
NLM
Santos BR dos, Pinheiro RV, Arroyo FN, Almeida DH de, Christoforo AL, Lahr FAR. Cracks studies case of buildings in Sinop city - Brazil [Internet]. International Journal of Materials Engineering. 2017 ; 7( 6): 101-110.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170706.01
Vancouver
Santos BR dos, Pinheiro RV, Arroyo FN, Almeida DH de, Christoforo AL, Lahr FAR. Cracks studies case of buildings in Sinop city - Brazil [Internet]. International Journal of Materials Engineering. 2017 ; 7( 6): 101-110.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170706.01
Artigo de periodico
Development of alternative simulator for the sugar manufacturing process (2017)
Petrassi, Diego Christoforo; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Assunto: ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PETRASSI, Diego Christoforo et al. Development of alternative simulator for the sugar manufacturing process. International Journal of Materials Engineering, v. 7, n. 2, p. 54-60, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.scit.20170702.03. Acesso em: 18 abr. 2024.
APA
Petrassi, D. C., Arroyo, F. N., Almeida, D. H. de, Christoforo, A. L., & Lahr, F. A. R. (2017). Development of alternative simulator for the sugar manufacturing process. International Journal of Materials Engineering, 7( 2), 54-60. doi:10.5923/j.scit.20170702.03
NLM
Petrassi DC, Arroyo FN, Almeida DH de, Christoforo AL, Lahr FAR. Development of alternative simulator for the sugar manufacturing process [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 54-60.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.scit.20170702.03
Vancouver
Petrassi DC, Arroyo FN, Almeida DH de, Christoforo AL, Lahr FAR. Development of alternative simulator for the sugar manufacturing process [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 54-60.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.scit.20170702.03
Artigo de periodico
Embedment parallel to the grain strength of the schizolobium amazonicum herb wood specie (2017)
Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Pinheiro, Roberto Vasconcelos; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: ELEMENTOS ESTRUTURAIS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Diego Henrique de et al. Embedment parallel to the grain strength of the schizolobium amazonicum herb wood specie. International Journal of Materials Engineering, v. 7, n. 3, p. 52-54, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170703.02. Acesso em: 18 abr. 2024.
APA
Almeida, D. H. de, Almeida, T. H. de, Pinheiro, R. V., Christoforo, A. L., & Lahr, F. A. R. (2017). Embedment parallel to the grain strength of the schizolobium amazonicum herb wood specie. International Journal of Materials Engineering, 7( 3), 52-54. doi:10.5923/j.ijme.20170703.02
NLM
Almeida DH de, Almeida TH de, Pinheiro RV, Christoforo AL, Lahr FAR. Embedment parallel to the grain strength of the schizolobium amazonicum herb wood specie [Internet]. International Journal of Materials Engineering. 2017 ; 7( 3): 52-54.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170703.02
Vancouver
Almeida DH de, Almeida TH de, Pinheiro RV, Christoforo AL, Lahr FAR. Embedment parallel to the grain strength of the schizolobium amazonicum herb wood specie [Internet]. International Journal of Materials Engineering. 2017 ; 7( 3): 52-54.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170703.02
Artigo de periodico
Pull out strength evaluation of steel bars bonded-in to 45° in round timbers of Corymbia citriodora treated with CCA (2017)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: AÇO, MADEIRA, CISALHAMENTO, RESINAS EPOXI
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Pull out strength evaluation of steel bars bonded-in to 45° in round timbers of Corymbia citriodora treated with CCA. International Journal of Materials Engineering, v. 7, n. 2, p. 25-32, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170702.02. Acesso em: 18 abr. 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Calil Júnior, C., & Lahr, F. A. R. (2017). Pull out strength evaluation of steel bars bonded-in to 45° in round timbers of Corymbia citriodora treated with CCA. International Journal of Materials Engineering, 7( 2), 25-32. doi:10.5923/j.ijme.20170702.02
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Calil Júnior C, Lahr FAR. Pull out strength evaluation of steel bars bonded-in to 45° in round timbers of Corymbia citriodora treated with CCA [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 25-32.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170702.02
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Calil Júnior C, Lahr FAR. Pull out strength evaluation of steel bars bonded-in to 45° in round timbers of Corymbia citriodora treated with CCA [Internet]. International Journal of Materials Engineering. 2017 ; 7( 2): 25-32.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170702.02
Artigo de periodico
Toughness and impact strength in dynamic bending of wood as a function of the modulus of elasticity and the strength in compression to the grain (2017)
Moreira, Aline Pinto; Silveira, Emily da; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Panzera, Túlio Hallak; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: MADEIRA, RESISTÊNCIA DOS MATERIAIS, TENACIDADE DOS MATERIAIS, ANÁLISE DE VARIÂNCIA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Aline Pinto et al. Toughness and impact strength in dynamic bending of wood as a function of the modulus of elasticity and the strength in compression to the grain. International Journal of Materials Engineering, v. 7, n. 4, p. 61-67, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170704.01. Acesso em: 18 abr. 2024.
APA
Moreira, A. P., Silveira, E. da, Almeida, D. H. de, Almeida, T. H. de, Panzera, T. H., Christoforo, A. L., & Lahr, F. A. R. (2017). Toughness and impact strength in dynamic bending of wood as a function of the modulus of elasticity and the strength in compression to the grain. International Journal of Materials Engineering, 7( 4), 61-67. doi:10.5923/j.ijme.20170704.01
NLM
Moreira AP, Silveira E da, Almeida DH de, Almeida TH de, Panzera TH, Christoforo AL, Lahr FAR. Toughness and impact strength in dynamic bending of wood as a function of the modulus of elasticity and the strength in compression to the grain [Internet]. International Journal of Materials Engineering. 2017 ; 7( 4): 61-67.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170704.01
Vancouver
Moreira AP, Silveira E da, Almeida DH de, Almeida TH de, Panzera TH, Christoforo AL, Lahr FAR. Toughness and impact strength in dynamic bending of wood as a function of the modulus of elasticity and the strength in compression to the grain [Internet]. International Journal of Materials Engineering. 2017 ; 7( 4): 61-67.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170704.01
Artigo de periodico
Analyzing the variability of the flexural rigidity in pre-stressed laminated wood plates (2017)
Pletz, Everaldo; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Cavalheiro, Raquel Schmitt; Pigozzo, Julio César; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: TENSÃO ESTRUTURAL, ESTRUTURAS DE MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PLETZ, Everaldo et al. Analyzing the variability of the flexural rigidity in pre-stressed laminated wood plates. International Journal of Materials Engineering, v. 7, n. 5, p. 88-92, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170705.02. Acesso em: 18 abr. 2024.
APA
Pletz, E., Arroyo, F. N., Almeida, D. H. de, Cavalheiro, R. S., Pigozzo, J. C., Christoforo, A. L., & Lahr, F. A. R. (2017). Analyzing the variability of the flexural rigidity in pre-stressed laminated wood plates. International Journal of Materials Engineering, 7( 5), 88-92. doi:10.5923/j.ijme.20170705.02
NLM
Pletz E, Arroyo FN, Almeida DH de, Cavalheiro RS, Pigozzo JC, Christoforo AL, Lahr FAR. Analyzing the variability of the flexural rigidity in pre-stressed laminated wood plates [Internet]. International Journal of Materials Engineering. 2017 ; 7( 5): 88-92.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170705.02
Vancouver
Pletz E, Arroyo FN, Almeida DH de, Cavalheiro RS, Pigozzo JC, Christoforo AL, Lahr FAR. Analyzing the variability of the flexural rigidity in pre-stressed laminated wood plates [Internet]. International Journal of Materials Engineering. 2017 ; 7( 5): 88-92.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170705.02
Artigo de periodico
Production of structural OSB with Cajueiro (Anacardium sp.) and Amescla (Trattinikia sp.): a preliminary study (2017)
Freitas, Jonathan Francisco de; Souza, Amós Magalhães de; Granco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: MADEIRA, PAINÉIS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Jonathan Francisco de et al. Production of structural OSB with Cajueiro (Anacardium sp.) and Amescla (Trattinikia sp.): a preliminary study. International Journal of Materials Engineering, v. 7, n. 1, p. 17-20, 2017Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20170701.03. Acesso em: 18 abr. 2024.
APA
Freitas, J. F. de, Souza, A. M. de, Granco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2017). Production of structural OSB with Cajueiro (Anacardium sp.) and Amescla (Trattinikia sp.): a preliminary study. International Journal of Materials Engineering, 7( 1), 17-20. doi:10.5923/j.ijme.20170701.03
NLM
Freitas JF de, Souza AM de, Granco LAMN, Chahud E, Christoforo AL, Lahr FAR. Production of structural OSB with Cajueiro (Anacardium sp.) and Amescla (Trattinikia sp.): a preliminary study [Internet]. International Journal of Materials Engineering. 2017 ; 7( 1): 17-20.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170701.03
Vancouver
Freitas JF de, Souza AM de, Granco LAMN, Chahud E, Christoforo AL, Lahr FAR. Production of structural OSB with Cajueiro (Anacardium sp.) and Amescla (Trattinikia sp.): a preliminary study [Internet]. International Journal of Materials Engineering. 2017 ; 7( 1): 17-20.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20170701.03
Artigo de periodico
EDGE glued panels grading through transversal vibration testing (2016)
Calil Neto, Carlito; Arroyo, Felipe; Araujo, Victor Almeida de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Calil Júnior, Carlito
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: ENSAIOS NÃO DESTRUTIVOS, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALIL NETO, Carlito et al. EDGE glued panels grading through transversal vibration testing. International Journal of Materials Engineering, v. 6, n. 3, p. 97-102, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160603.06. Acesso em: 18 abr. 2024.
APA
Calil Neto, C., Arroyo, F., Araujo, V. A. de, Christoforo, A. L., Lahr, F. A. R., & Calil Júnior, C. (2016). EDGE glued panels grading through transversal vibration testing. International Journal of Materials Engineering, 6( 3), 97-102. doi:10.5923/j.ijme.20160603.06
NLM
Calil Neto C, Arroyo F, Araujo VA de, Christoforo AL, Lahr FAR, Calil Júnior C. EDGE glued panels grading through transversal vibration testing [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 97-102.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.06
Vancouver
Calil Neto C, Arroyo F, Araujo VA de, Christoforo AL, Lahr FAR, Calil Júnior C. EDGE glued panels grading through transversal vibration testing [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 97-102.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.06
Artigo de periodico
Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa (2016)
Icimoto, Felipe Hideyoshi; Calil Neto, Carlito; Ferro, Fabiane Salles; Macedo, Laurenn Borges de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Calil Júnior, Carlito
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: ESTRUTURAS DE MADEIRA COLADA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ICIMOTO, Felipe Hideyoshi et al. Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa. International Journal of Materials Engineering, v. 6, n. 2, p. 51-55, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160602.05. Acesso em: 18 abr. 2024.
APA
Icimoto, F. H., Calil Neto, C., Ferro, F. S., Macedo, L. B. de, Christoforo, A. L., Lahr, F. A. R., & Calil Júnior, C. (2016). Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa. International Journal of Materials Engineering, 6( 2), 51-55. doi:10.5923/j.ijme.20160602.05
NLM
Icimoto FH, Calil Neto C, Ferro FS, Macedo LB de, Christoforo AL, Lahr FAR, Calil Júnior C. Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 51-55.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.05
Vancouver
Icimoto FH, Calil Neto C, Ferro FS, Macedo LB de, Christoforo AL, Lahr FAR, Calil Júnior C. Influence of lamellar thickness on strength and stiffness of glued laminated timber beams of Pinus oocarpa [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 51-55.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.05
Artigo de periodico
Mechanical properties of Paricá wood using structural members and clear specimens (2016)
Cavalheiro, Raquel Schmitt; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Araujo, Victor Almeida de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: MADEIRA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAVALHEIRO, Raquel Schmitt et al. Mechanical properties of Paricá wood using structural members and clear specimens. International Journal of Materials Engineering, v. 6, n. 2, p. 56-59, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160602.06. Acesso em: 18 abr. 2024.
APA
Cavalheiro, R. S., Almeida, D. H. de, Almeida, T. H. de, Araujo, V. A. de, Christoforo, A. L., & Lahr, F. A. R. (2016). Mechanical properties of Paricá wood using structural members and clear specimens. International Journal of Materials Engineering, 6( 2), 56-59. doi:10.5923/j.ijme.20160602.06
NLM
Cavalheiro RS, Almeida DH de, Almeida TH de, Araujo VA de, Christoforo AL, Lahr FAR. Mechanical properties of Paricá wood using structural members and clear specimens [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 56-59.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.06
Vancouver
Cavalheiro RS, Almeida DH de, Almeida TH de, Araujo VA de, Christoforo AL, Lahr FAR. Mechanical properties of Paricá wood using structural members and clear specimens [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 56-59.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.06
Artigo de periodico
Shrinkage for some wood species estimated by density (2016)
Christoforo, André Luis; Almeida, Tiago Hendrigo de; Almeida, Diego Henrique de; Santos, Júlio Cesar dos; Panzera, Túlio Hallak; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: DENSIDADE DA MADEIRA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Shrinkage for some wood species estimated by density. International Journal of Materials Engineering, v. 6, n. 2, p. 23-27, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160602.01. Acesso em: 18 abr. 2024.
APA
Christoforo, A. L., Almeida, T. H. de, Almeida, D. H. de, Santos, J. C. dos, Panzera, T. H., & Lahr, F. A. R. (2016). Shrinkage for some wood species estimated by density. International Journal of Materials Engineering, 6( 2), 23-27. doi:10.5923/j.ijme.20160602.01
NLM
Christoforo AL, Almeida TH de, Almeida DH de, Santos JC dos, Panzera TH, Lahr FAR. Shrinkage for some wood species estimated by density [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 23-27.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.01
Vancouver
Christoforo AL, Almeida TH de, Almeida DH de, Santos JC dos, Panzera TH, Lahr FAR. Shrinkage for some wood species estimated by density [Internet]. International Journal of Materials Engineering. 2016 ; 6( 2): 23-27.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160602.01
Artigo de periodico
Full characterization of Vatairea sp wood specie (2016)
Lahr, Francisco Antonio Rocco; Aftimus, Bruno Henrique Cavalheiro; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Christoforo, André Luis; Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: DENSIDADE DA MADEIRA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Francisco Antonio Rocco et al. Full characterization of Vatairea sp wood specie. International Journal of Materials Engineering, v. 6, n. 3, p. 92-96, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160603.05. Acesso em: 18 abr. 2024.
APA
Lahr, F. A. R., Aftimus, B. H. C., Arroyo, F. N., Almeida, D. H. de, Christoforo, A. L., Chahud, E., & Branco, L. A. M. N. (2016). Full characterization of Vatairea sp wood specie. International Journal of Materials Engineering, 6( 3), 92-96. doi:10.5923/j.ijme.20160603.05
NLM
Lahr FAR, Aftimus BHC, Arroyo FN, Almeida DH de, Christoforo AL, Chahud E, Branco LAMN. Full characterization of Vatairea sp wood specie [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 92-96.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.05
Vancouver
Lahr FAR, Aftimus BHC, Arroyo FN, Almeida DH de, Christoforo AL, Chahud E, Branco LAMN. Full characterization of Vatairea sp wood specie [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 92-96.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.05
Artigo de periodico
Physical properties of OSB panels manufactured with CCA and CCB treated Schizolobium amazonicum and bonded with castor oil based polyurethane resin (2016)
Ferro, Fabiane Salles; Almeida, Tiago Hendrigo de; Almeida, Diego Henrique de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: MADEIRA, CHAPAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERRO, Fabiane Salles et al. Physical properties of OSB panels manufactured with CCA and CCB treated Schizolobium amazonicum and bonded with castor oil based polyurethane resin. International Journal of Materials Engineering, v. 6, n. 5, p. 151-154, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160605.02. Acesso em: 18 abr. 2024.
APA
Ferro, F. S., Almeida, T. H. de, Almeida, D. H. de, Christoforo, A. L., & Lahr, F. A. R. (2016). Physical properties of OSB panels manufactured with CCA and CCB treated Schizolobium amazonicum and bonded with castor oil based polyurethane resin. International Journal of Materials Engineering, 6( 5), 151-154. doi:10.5923/j.ijme.20160605.02
NLM
Ferro FS, Almeida TH de, Almeida DH de, Christoforo AL, Lahr FAR. Physical properties of OSB panels manufactured with CCA and CCB treated Schizolobium amazonicum and bonded with castor oil based polyurethane resin [Internet]. International Journal of Materials Engineering. 2016 ; 6( 5): 151-154.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160605.02
Vancouver
Ferro FS, Almeida TH de, Almeida DH de, Christoforo AL, Lahr FAR. Physical properties of OSB panels manufactured with CCA and CCB treated Schizolobium amazonicum and bonded with castor oil based polyurethane resin [Internet]. International Journal of Materials Engineering. 2016 ; 6( 5): 151-154.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160605.02
Artigo de periodico
Density as estimator of shrinkage for some brazilian wood species (2016)
Cavalheiro, Raquel Schmitt; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidade: EESC
Subjects: CONÍFERAS, ESTRUTURAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAVALHEIRO, Raquel Schmitt et al. Density as estimator of shrinkage for some brazilian wood species. International Journal of Materials Engineering, v. 6, n. 3, p. 107-112, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160603.08. Acesso em: 18 abr. 2024.
APA
Cavalheiro, R. S., Almeida, D. H. de, Almeida, T. H., Christoforo, A. L., & Lahr, F. A. R. (2016). Density as estimator of shrinkage for some brazilian wood species. International Journal of Materials Engineering, 6( 3), 107-112. doi:10.5923/j.ijme.20160603.08
NLM
Cavalheiro RS, Almeida DH de, Almeida TH, Christoforo AL, Lahr FAR. Density as estimator of shrinkage for some brazilian wood species [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 107-112.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.08
Vancouver
Cavalheiro RS, Almeida DH de, Almeida TH, Christoforo AL, Lahr FAR. Density as estimator of shrinkage for some brazilian wood species [Internet]. International Journal of Materials Engineering. 2016 ; 6( 3): 107-112.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160603.08
Artigo de periodico
Numerical study of finite fracture growth in an epoxy resin (2016)
Christoforo, André Luis; Silveira, Márcio Eduardo; Dias, Avelino Manuel da Silva; Araujo, Victor Almeida de; Lahr, Francisco Antonio Rocco
Source: International Journal of Materials Engineering. Unidades: EESC, ESALQ
Subjects: MÉTODO DOS ELEMENTOS FINITOS, FRATURA DAS ESTRUTURAS, RESINAS EPOXI, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Numerical study of finite fracture growth in an epoxy resin. International Journal of Materials Engineering, v. 6, n. 1, p. 15-21, 2016Tradução . . Disponível em: https://doi.org/10.5923/j.ijme.20160601.03. Acesso em: 18 abr. 2024.
APA
Christoforo, A. L., Silveira, M. E., Dias, A. M. da S., Araujo, V. A. de, & Lahr, F. A. R. (2016). Numerical study of finite fracture growth in an epoxy resin. International Journal of Materials Engineering, 6( 1), 15-21. doi:10.5923/j.ijme.20160601.03
NLM
Christoforo AL, Silveira ME, Dias AM da S, Araujo VA de, Lahr FAR. Numerical study of finite fracture growth in an epoxy resin [Internet]. International Journal of Materials Engineering. 2016 ; 6( 1): 15-21.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160601.03
Vancouver
Christoforo AL, Silveira ME, Dias AM da S, Araujo VA de, Lahr FAR. Numerical study of finite fracture growth in an epoxy resin [Internet]. International Journal of Materials Engineering. 2016 ; 6( 1): 15-21.[citado 2024 abr. 18 ] Available from: https://doi.org/10.5923/j.ijme.20160601.03

USP Schools

ReP

Filtros

Authors

Date published

Subjects

Normalized affiliation

Non normalized affiliation