ReP USP - Resultado da busca

Artigo de periodico
Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties (2024)
Bon, Douglas Geovanni; Cavalcanti, Thiago; Thiesen, Anselmo; Santos, Henrique; Gutjhar, Jhonattan; Cintho, Osvaldo Mitsuyuki ; Coelho, Reginaldo Teixeira ; Oliveira, Marcelo Falcão de ; Ribamar, Giovani Gonçalves; Avila, Julian Arnaldo
Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, EP
Subjects: MANUFATURA ADITIVA, LASER, CALOR, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BON, Douglas Geovanni et al. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, v. 130, n. 9-10, p. 4919-4931, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-024-12967-4. Acesso em: 05 nov. 2024.
APA
Bon, D. G., Cavalcanti, T., Thiesen, A., Santos, H., Gutjhar, J., Cintho, O. M., et al. (2024). Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, 130( 9-10), 4919-4931. doi:10.1007/s00170-024-12967-4
NLM
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 nov. 05 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Vancouver
Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2024 nov. 05 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
Artigo de periodico
Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior (2023)
Passos, João Gabriel da Cruz; Freitas, Bruno Xavier de; Silva, Rodrigo da; Della Rovere, Carlos Alberto; Magnabosco, Rodrigo; Oliveira, Marcelo Falcão de ; Malafaia, Artur Mariano de Sousa
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: OXIDAÇÃO, MUDANÇA DE FASE, LIGAS METÁLICAS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASSOS, João Gabriel da Cruz et al. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, v. 27, p. 1281-1292, 2023Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2023.10.026. Acesso em: 05 nov. 2024.
APA
Passos, J. G. da C., Freitas, B. X. de, Silva, R. da, Della Rovere, C. A., Magnabosco, R., Oliveira, M. F. de, & Malafaia, A. M. de S. (2023). Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior. Journal of Materials Research and Technology, 27, 1281-1292. doi:10.1016/j.jmrt.2023.10.026
NLM
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2024 nov. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Vancouver
Passos JG da C, Freitas BX de, Silva R da, Della Rovere CA, Magnabosco R, Oliveira MF de, Malafaia AM de S. Ferritic layers formation mechanism during oxidation of FeMnSiCrNi alloys: Effect of temperature and influence on oxidation behavior [Internet]. Journal of Materials Research and Technology. 2023 ; 27 1281-1292.[citado 2024 nov. 05 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2023.10.026
Artigo de periodico
Oxide formation in a melt spun alloy in the Zr-Ni-Cu system (2022)
Campos Neto, Nelson Delfino de ; Déo, Leonardo Pratavieira; Mendes, Marcio Andreato Batista; Kaufman, Michael Joseph; Oliveira, Marcelo Falcão de
Source: Materials Research. Unidade: EESC
Subjects: VIDROS METÁLICOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system. Materials Research, v. 25, p. 1-6, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2021-0594. Acesso em: 05 nov. 2024.
APA
Campos Neto, N. D. de, Déo, L. P., Mendes, M. A. B., Kaufman, M. J., & Oliveira, M. F. de. (2022). Oxide formation in a melt spun alloy in the Zr-Ni-Cu system. Materials Research, 25, 1-6. doi:10.1590/1980-5373-MR-2021-0594
NLM
Campos Neto ND de, Déo LP, Mendes MAB, Kaufman MJ, Oliveira MF de. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system [Internet]. Materials Research. 2022 ; 25 1-6.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0594
Vancouver
Campos Neto ND de, Déo LP, Mendes MAB, Kaufman MJ, Oliveira MF de. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system [Internet]. Materials Research. 2022 ; 25 1-6.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0594
Artigo de periodico
The effect of hydrogen on the fracture toughness of friction-stir welded API 5L X70 pipeline steels (2022)
Giarola, Joseane Moreira ; Avila, Julian Arnaldo ; Cintho, Osvaldo Mitsuyuki ; Pinto, Haroldo Cavalcanti ; Oliveira, Marcelo Falcão de ; Bose Filho, Waldek Wladimir
Source: Fatigue & Fracture of Engineering Materials and Structures. Unidade: EESC
Subjects: TENACIDADE DOS MATERIAIS, MECÂNICA DA FRATURA, AÇO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GIAROLA, Joseane Moreira et al. The effect of hydrogen on the fracture toughness of friction-stir welded API 5L X70 pipeline steels. Fatigue & Fracture of Engineering Materials and Structures, v. 45, n. 10, p. 3009-3024, 2022Tradução . . Disponível em: https://doi.org/10.1111/ffe.13799. Acesso em: 05 nov. 2024.
APA
Giarola, J. M., Avila, J. A., Cintho, O. M., Pinto, H. C., Oliveira, M. F. de, & Bose Filho, W. W. (2022). The effect of hydrogen on the fracture toughness of friction-stir welded API 5L X70 pipeline steels. Fatigue & Fracture of Engineering Materials and Structures, 45( 10), 3009-3024. doi:10.1111/ffe.13799
NLM
Giarola JM, Avila JA, Cintho OM, Pinto HC, Oliveira MF de, Bose Filho WW. The effect of hydrogen on the fracture toughness of friction-stir welded API 5L X70 pipeline steels [Internet]. Fatigue & Fracture of Engineering Materials and Structures. 2022 ; 45( 10): 3009-3024.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1111/ffe.13799
Vancouver
Giarola JM, Avila JA, Cintho OM, Pinto HC, Oliveira MF de, Bose Filho WW. The effect of hydrogen on the fracture toughness of friction-stir welded API 5L X70 pipeline steels [Internet]. Fatigue & Fracture of Engineering Materials and Structures. 2022 ; 45( 10): 3009-3024.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1111/ffe.13799
Trabalho de evento
Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part II—high temperature cyclic oxidation behavior (2022)
Malafaia, Artur Mariano de Sousa; Maestro, Carolina Aurélia Ribeiro; Oliveira, Marcelo Falcão de
Source: International Journal of Metalcasting. Unidade: EESC
Subjects: RESISTÊNCIA A TRAÇÃO, ESTRUTURAS METÁLICAS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa e MAESTRO, Carolina Aurélia Ribeiro e OLIVEIRA, Marcelo Falcão de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part II—high temperature cyclic oxidation behavior. 2022, Anais.. Schaumburg, IL, USA: American Foundry Society, 2022. p. 1-8. Disponível em: https://doi.org/10.1007/s40962-022-00881-y. Acesso em: 05 nov. 2024.
APA
Malafaia, A. M. de S., Maestro, C. A. R., & Oliveira, M. F. de. (2022). Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part II—high temperature cyclic oxidation behavior. In International Journal of Metalcasting (p. 1-8). Schaumburg, IL, USA: American Foundry Society. doi:10.1007/s40962-022-00881-y
NLM
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part II—high temperature cyclic oxidation behavior [Internet]. International Journal of Metalcasting. 2022 ; 1-8.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s40962-022-00881-y
Vancouver
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part II—high temperature cyclic oxidation behavior [Internet]. International Journal of Metalcasting. 2022 ; 1-8.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s40962-022-00881-y
Trabalho de evento
Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures (2021)
Malafaia, Artur Mariano de Sousa; Maestro, Carolina Aurélia Ribeiro; Oliveira, Marcelo Falcão de
Source: International Journal of Metalcasting. Unidade: EESC
Subjects: RESISTÊNCIA A TRAÇÃO, ESTRUTURAS METÁLICAS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa e MAESTRO, Carolina Aurélia Ribeiro e OLIVEIRA, Marcelo Falcão de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures. 2021, Anais.. Schaumburg, IL, USA: American Foundry Society, 2021. p. 1-11. Disponível em: https://doi.org/10.1007/s40962-021-00679-4. Acesso em: 05 nov. 2024.
APA
Malafaia, A. M. de S., Maestro, C. A. R., & Oliveira, M. F. de. (2021). Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures. In International Journal of Metalcasting (p. 1-11). Schaumburg, IL, USA: American Foundry Society. doi:10.1007/s40962-021-00679-4
NLM
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures [Internet]. International Journal of Metalcasting. 2021 ; 1-11.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s40962-021-00679-4
Vancouver
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures [Internet]. International Journal of Metalcasting. 2021 ; 1-11.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s40962-021-00679-4
Trabalho de evento
Life behavior under thermomechanical fatigue of two types of compacted graphite iron (2021)
Oliveira, Guilherme Silva; Bon, Douglas Geovanni; Oliveira, Marcelo Falcão de
Source: Livro de resumos. Conference titles: Simpósio em Ciência e Engenharia de Materiais - SICEM. Unidade: EESC
Subjects: FADIGA DOS MATERIAIS, FERRO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Guilherme Silva e BON, Douglas Geovanni e OLIVEIRA, Marcelo Falcão de. Life behavior under thermomechanical fatigue of two types of compacted graphite iron. 2021, Anais.. São Carlos, SP: EESC, 2021. Disponível em: http://soac.eesc.usp.br/index.php/SICEM/sicem2021/paper/view/3449/2327. Acesso em: 05 nov. 2024.
APA
Oliveira, G. S., Bon, D. G., & Oliveira, M. F. de. (2021). Life behavior under thermomechanical fatigue of two types of compacted graphite iron. In Livro de resumos. São Carlos, SP: EESC. Recuperado de http://soac.eesc.usp.br/index.php/SICEM/sicem2021/paper/view/3449/2327
NLM
Oliveira GS, Bon DG, Oliveira MF de. Life behavior under thermomechanical fatigue of two types of compacted graphite iron [Internet]. Livro de resumos. 2021 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2021/paper/view/3449/2327
Vancouver
Oliveira GS, Bon DG, Oliveira MF de. Life behavior under thermomechanical fatigue of two types of compacted graphite iron [Internet]. Livro de resumos. 2021 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2021/paper/view/3449/2327
Artigo de periodico
Vitreloy-105 behavior under mutual wear (2020)
Salgado, Felipe Raphael ; Gonçalves, Janaina Fracaro de Souza; Mendes, Marcio Andreato Batista; Campos Neto, Nelson Delfino de ; Oliveira, Marcelo Falcão de
Source: Materials Research. Unidade: EESC
Subjects: VIDROS METÁLICOS, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALGADO, Felipe Raphael et al. Vitreloy-105 behavior under mutual wear. Materials Research, v. 23, n. 4, 2020Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-mr-2020-0021. Acesso em: 05 nov. 2024.
APA
Salgado, F. R., Gonçalves, J. F. de S., Mendes, M. A. B., Campos Neto, N. D. de, & Oliveira, M. F. de. (2020). Vitreloy-105 behavior under mutual wear. Materials Research, 23( 4). doi:10.1590/1980-5373-mr-2020-0021
NLM
Salgado FR, Gonçalves JF de S, Mendes MAB, Campos Neto ND de, Oliveira MF de. Vitreloy-105 behavior under mutual wear [Internet]. Materials Research. 2020 ; 23( 4):[citado 2024 nov. 05 ] Available from: https://doi.org/10.1590/1980-5373-mr-2020-0021
Vancouver
Salgado FR, Gonçalves JF de S, Mendes MAB, Campos Neto ND de, Oliveira MF de. Vitreloy-105 behavior under mutual wear [Internet]. Materials Research. 2020 ; 23( 4):[citado 2024 nov. 05 ] Available from: https://doi.org/10.1590/1980-5373-mr-2020-0021
Artigo de periodico
Oxygen effect on bending behavior of a zirconium based bulk metallic glass (2020)
Teixeira, Camila A.; Silva, R. V. da; Pereira, L. T.; Oliveira, Marcelo Falcão de
Source: Journal of Non-Crystalline Solids. Unidade: EESC
Assunto: VIDROS METÁLICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TEIXEIRA, Camila A. et al. Oxygen effect on bending behavior of a zirconium based bulk metallic glass. Journal of Non-Crystalline Solids, v. 535, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jnoncrysol.2020.119966. Acesso em: 05 nov. 2024.
APA
Teixeira, C. A., Silva, R. V. da, Pereira, L. T., & Oliveira, M. F. de. (2020). Oxygen effect on bending behavior of a zirconium based bulk metallic glass. Journal of Non-Crystalline Solids, 535. doi:10.1016/j.jnoncrysol.2020.119966
NLM
Teixeira CA, Silva RV da, Pereira LT, Oliveira MF de. Oxygen effect on bending behavior of a zirconium based bulk metallic glass [Internet]. Journal of Non-Crystalline Solids. 2020 ; 535[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jnoncrysol.2020.119966
Vancouver
Teixeira CA, Silva RV da, Pereira LT, Oliveira MF de. Oxygen effect on bending behavior of a zirconium based bulk metallic glass [Internet]. Journal of Non-Crystalline Solids. 2020 ; 535[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jnoncrysol.2020.119966
Artigo de periodico
Glass forming ability and continuous-cooling-transformation (CCT) diagrams of Vitreloy 105 as function of cooling rate and oxygen concentration (2020)
Campos Neto, Nelson Delfino de ; Soares, Carolina ; Pereira, Flavio Soares; Bergamaschi, V.; Antonio, Selma Gutierrez ; Kaufman, Michael Joseph; Oliveira, Marcelo Falcão de
Source: Journal of Non-Crystalline Solids. Unidade: EESC
Subjects: VIDROS METÁLICOS, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Glass forming ability and continuous-cooling-transformation (CCT) diagrams of Vitreloy 105 as function of cooling rate and oxygen concentration. Journal of Non-Crystalline Solids, v. 528, n. Ja 2020, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jnoncrysol.2019.119762. Acesso em: 05 nov. 2024.
APA
Campos Neto, N. D. de, Soares, C., Pereira, F. S., Bergamaschi, V., Antonio, S. G., Kaufman, M. J., & Oliveira, M. F. de. (2020). Glass forming ability and continuous-cooling-transformation (CCT) diagrams of Vitreloy 105 as function of cooling rate and oxygen concentration. Journal of Non-Crystalline Solids, 528( Ja 2020). doi:10.1016/j.jnoncrysol.2019.119762
NLM
Campos Neto ND de, Soares C, Pereira FS, Bergamaschi V, Antonio SG, Kaufman MJ, Oliveira MF de. Glass forming ability and continuous-cooling-transformation (CCT) diagrams of Vitreloy 105 as function of cooling rate and oxygen concentration [Internet]. Journal of Non-Crystalline Solids. 2020 ; 528( Ja 2020):[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jnoncrysol.2019.119762
Vancouver
Campos Neto ND de, Soares C, Pereira FS, Bergamaschi V, Antonio SG, Kaufman MJ, Oliveira MF de. Glass forming ability and continuous-cooling-transformation (CCT) diagrams of Vitreloy 105 as function of cooling rate and oxygen concentration [Internet]. Journal of Non-Crystalline Solids. 2020 ; 528( Ja 2020):[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jnoncrysol.2019.119762
Artigo de periodico
Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds (2020)
Guilherme, L. H.; Benedetti, A V; Fugivara , C. S; Magnabosco, Rodrigo ; Oliveira, Marcelo Falcão de
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, TROCADORES DE CALOR, CORROSÃO, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUILHERME, L. H. et al. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds. Journal of Materials Research and Technology, v. 9, n. 5, p. se/oct. 2020, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2020.07.039. Acesso em: 05 nov. 2024.
APA
Guilherme, L. H., Benedetti, A. V., Fugivara , C. S., Magnabosco, R., & Oliveira, M. F. de. (2020). Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds. Journal of Materials Research and Technology, 9( 5), se/oct. 2020. doi:10.1016/j.jmrt.2020.07.039
NLM
Guilherme LH, Benedetti AV, Fugivara CS, Magnabosco R, Oliveira MF de. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 5): se/oct. 2020.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.07.039
Vancouver
Guilherme LH, Benedetti AV, Fugivara CS, Magnabosco R, Oliveira MF de. Effect of MAG welding transfer mode on sigma phase precipitation and corrosion performance of 316L stainless steel multi-pass welds [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 5): se/oct. 2020.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jmrt.2020.07.039
Artigo de periodico
Effective method to enhance the glass-forming ability of vitreloy 105 containing high oxygen concentrations (2020)
Campos Neto, Nelson Delfino de ; Rocha, Renan Freire de Carvalho Lopes; Pereira, Flavio Soares; Soares, Carolina ; Maria, Felipe Henrique Santa; Oliveira, Marcelo Falcão de
Source: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. Unidade: EESC
Assunto: VIDROS METÁLICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Effective method to enhance the glass-forming ability of vitreloy 105 containing high oxygen concentrations. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, v. 51, p. 3518–3525, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11661-020-05775-4. Acesso em: 05 nov. 2024.
APA
Campos Neto, N. D. de, Rocha, R. F. de C. L., Pereira, F. S., Soares, C., Maria, F. H. S., & Oliveira, M. F. de. (2020). Effective method to enhance the glass-forming ability of vitreloy 105 containing high oxygen concentrations. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 51, 3518–3525. doi:10.1007/s11661-020-05775-4
NLM
Campos Neto ND de, Rocha RF de CL, Pereira FS, Soares C, Maria FHS, Oliveira MF de. Effective method to enhance the glass-forming ability of vitreloy 105 containing high oxygen concentrations [Internet]. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 2020 ; 51 3518–3525.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s11661-020-05775-4
Vancouver
Campos Neto ND de, Rocha RF de CL, Pereira FS, Soares C, Maria FHS, Oliveira MF de. Effective method to enhance the glass-forming ability of vitreloy 105 containing high oxygen concentrations [Internet]. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 2020 ; 51 3518–3525.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1007/s11661-020-05775-4
Artigo de periodico
The elastic-strain energy criterion of phase formation for complex concentrated alloys (2019)
Andreoli, Angelo Fernandes; Orava, Jiri; Liaw, Peter K; Weber, Hans; Oliveira, Marcelo Falcão de ; Nielsch, Kornelius; Kaban, Ivan
Source: Materialia. Unidade: EESC
Subjects: LIGAS METÁLICAS, DEFORMAÇÃO ELÁSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANDREOLI, Angelo Fernandes et al. The elastic-strain energy criterion of phase formation for complex concentrated alloys. Materialia, v. 5, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.mtla.2019.100222. Acesso em: 05 nov. 2024.
APA
Andreoli, A. F., Orava, J., Liaw, P. K., Weber, H., Oliveira, M. F. de, Nielsch, K., & Kaban, I. (2019). The elastic-strain energy criterion of phase formation for complex concentrated alloys. Materialia, 5. doi:10.1016/j.mtla.2019.100222
NLM
Andreoli AF, Orava J, Liaw PK, Weber H, Oliveira MF de, Nielsch K, Kaban I. The elastic-strain energy criterion of phase formation for complex concentrated alloys [Internet]. Materialia. 2019 ; 5[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.mtla.2019.100222
Vancouver
Andreoli AF, Orava J, Liaw PK, Weber H, Oliveira MF de, Nielsch K, Kaban I. The elastic-strain energy criterion of phase formation for complex concentrated alloys [Internet]. Materialia. 2019 ; 5[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.mtla.2019.100222
Trabalho de evento
The effect of reverted austenite in a selective laser melted Maraging 300 steel (2019)
Conde, Fabio Faria ; Ávila Diaz, Julián Arnaldo ; Oliveira, Marcelo Falcão de
Source: Anais eletrônicos. Conference titles: Simpósio em Ciência e Engenharia de Materiais - SICEM. Unidade: EESC
Subjects: MATERIAIS, AÇO DE ALTA RESISTÊNCIA, DUCTILIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONDE, Fabio Faria e ÁVILA DIAZ, Julián Arnaldo e OLIVEIRA, Marcelo Falcão de. The effect of reverted austenite in a selective laser melted Maraging 300 steel. 2019, Anais.. São Carlos, SP: EESC/USP, 2019. Disponível em: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2531/1320. Acesso em: 05 nov. 2024.
APA
Conde, F. F., Ávila Diaz, J. A., & Oliveira, M. F. de. (2019). The effect of reverted austenite in a selective laser melted Maraging 300 steel. In Anais eletrônicos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2531/1320
NLM
Conde FF, Ávila Diaz JA, Oliveira MF de. The effect of reverted austenite in a selective laser melted Maraging 300 steel [Internet]. Anais eletrônicos. 2019 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2531/1320
Vancouver
Conde FF, Ávila Diaz JA, Oliveira MF de. The effect of reverted austenite in a selective laser melted Maraging 300 steel [Internet]. Anais eletrônicos. 2019 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2531/1320
Artigo de periodico
Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy: a finite element analysis (2019)
Malafaia, Artur Mariano de Sousa; Nascimento, Valdecy Rodrigo do; Sousa, Lucas Mendes; Silveira, Márcio Eduardo; Oliveira, Marcelo Falcão de
Source: Corrosion Science. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, CORROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa et al. Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy: a finite element analysis. Corrosion Science, v. 147, p. 223-230, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.corsci.2018.11.018. Acesso em: 05 nov. 2024.
APA
Malafaia, A. M. de S., Nascimento, V. R. do, Sousa, L. M., Silveira, M. E., & Oliveira, M. F. de. (2019). Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy: a finite element analysis. Corrosion Science, 147, 223-230. doi:10.1016/j.corsci.2018.11.018
NLM
Malafaia AM de S, Nascimento VR do, Sousa LM, Silveira ME, Oliveira MF de. Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy: a finite element analysis [Internet]. Corrosion Science. 2019 ; 147 223-230.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.corsci.2018.11.018
Vancouver
Malafaia AM de S, Nascimento VR do, Sousa LM, Silveira ME, Oliveira MF de. Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy: a finite element analysis [Internet]. Corrosion Science. 2019 ; 147 223-230.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.corsci.2018.11.018
Artigo de periodico
Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration (2019)
Campos Neto, Nelson Delfino de; Pereira, Flavio Soares; Antonio, Selma Gutierrez; Yaofeng, Guo; Clarke, Amy J.; Kaufman, Michael J.; Oliveira, Marcelo Falcão de
Source: Materials Characterization. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, VIDROS METÁLICOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, v. 158, p. 1-7, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2019.109932. Acesso em: 05 nov. 2024.
APA
Campos Neto, N. D. de, Pereira, F. S., Antonio, S. G., Yaofeng, G., Clarke, A. J., Kaufman, M. J., & Oliveira, M. F. de. (2019). Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, 158, 1-7. doi:10.1016/j.matchar.2019.109932
NLM
Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
Vancouver
Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
Artigo de periodico
Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues (2019)
Alves, Jacqueline Querino; Máximo, Leandro Nériton Cândido; Franco, Lilian Pereira; Silva, Roberto Santana da ; Oliveira, Marcelo Falcão de
Source: Analytical Methods. Unidades: FCFRP, EESC, FFCLRP
Subjects: COCAÍNA, SEMICONDUTORES (FÍSICO-QUÍMICA), ESPECTROSCOPIA, FLUORESCÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Jacqueline Querino et al. Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues. Analytical Methods, v. 11, n. 2, p. 185-191, 2019Tradução . . Disponível em: https://doi.org/10.1039/C8AY02243G. Acesso em: 05 nov. 2024.
APA
Alves, J. Q., Máximo, L. N. C., Franco, L. P., Silva, R. S. da, & Oliveira, M. F. de. (2019). Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues. Analytical Methods, 11( 2), 185-191. doi:10.1039/C8AY02243G
NLM
Alves JQ, Máximo LNC, Franco LP, Silva RS da, Oliveira MF de. Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues [Internet]. Analytical Methods. 2019 ; 11( 2): 185-191.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1039/C8AY02243G
Vancouver
Alves JQ, Máximo LNC, Franco LP, Silva RS da, Oliveira MF de. Fluorescence-quenching CdTe quantum dots applied for identification of cocaine-structure analogues [Internet]. Analytical Methods. 2019 ; 11( 2): 185-191.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1039/C8AY02243G
Trabalho de evento
Application of artificial neural networks for predicting isothermal diagrams of hypoeutectoid steels (2019)
Santos, Fabio Andrioli; Oliveira, Marcelo Falcão de
Source: Anais eletrônicos. Conference titles: Simpósio em Ciência e Engenharia de Materiais - SICEM. Unidade: EESC
Subjects: MATERIAIS, MATERIAIS, REDES NEURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Fabio Andrioli e OLIVEIRA, Marcelo Falcão de. Application of artificial neural networks for predicting isothermal diagrams of hypoeutectoid steels. 2019, Anais.. São Carlos, SP: EESC/USP, 2019. Disponível em: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2512/1325. Acesso em: 05 nov. 2024.
APA
Santos, F. A., & Oliveira, M. F. de. (2019). Application of artificial neural networks for predicting isothermal diagrams of hypoeutectoid steels. In Anais eletrônicos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2512/1325
NLM
Santos FA, Oliveira MF de. Application of artificial neural networks for predicting isothermal diagrams of hypoeutectoid steels [Internet]. Anais eletrônicos. 2019 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2512/1325
Vancouver
Santos FA, Oliveira MF de. Application of artificial neural networks for predicting isothermal diagrams of hypoeutectoid steels [Internet]. Anais eletrônicos. 2019 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2019/paper/view/2512/1325
Trabalho de evento
Comparison between synchrotron and conventional X-ray diffraction to quantification of Y2O3 at Zr52,5Cu17,9Ni14,6Al10Ti5 bulk metallic glass dopped with Y (2018)
Rocha, Renan Freire de Carvalho Lopes; Campos Neto, Nelson Delfino; Oliveira, Marcelo Falcão de
Source: Anais eletrônicos. Conference titles: Simpósio em Ciência e Engenharia de Materiais - SICEM. Unidade: EESC
Subjects: VIDROS METÁLICOS, DIFRAÇÃO POR RAIOS X, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROCHA, Renan Freire de Carvalho Lopes e CAMPOS NETO, Nelson Delfino e OLIVEIRA, Marcelo Falcão de. Comparison between synchrotron and conventional X-ray diffraction to quantification of Y2O3 at Zr52,5Cu17,9Ni14,6Al10Ti5 bulk metallic glass dopped with Y. 2018, Anais.. São Carlos, SP: EESC/USP, 2018. Disponível em: http://soac.eesc.usp.br/index.php/SICEM/sicem2018/paper/view/1231/906. Acesso em: 05 nov. 2024.
APA
Rocha, R. F. de C. L., Campos Neto, N. D., & Oliveira, M. F. de. (2018). Comparison between synchrotron and conventional X-ray diffraction to quantification of Y2O3 at Zr52,5Cu17,9Ni14,6Al10Ti5 bulk metallic glass dopped with Y. In Anais eletrônicos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/SICEM/sicem2018/paper/view/1231/906
NLM
Rocha RF de CL, Campos Neto ND, Oliveira MF de. Comparison between synchrotron and conventional X-ray diffraction to quantification of Y2O3 at Zr52,5Cu17,9Ni14,6Al10Ti5 bulk metallic glass dopped with Y [Internet]. Anais eletrônicos. 2018 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2018/paper/view/1231/906
Vancouver
Rocha RF de CL, Campos Neto ND, Oliveira MF de. Comparison between synchrotron and conventional X-ray diffraction to quantification of Y2O3 at Zr52,5Cu17,9Ni14,6Al10Ti5 bulk metallic glass dopped with Y [Internet]. Anais eletrônicos. 2018 ;[citado 2024 nov. 05 ] Available from: http://soac.eesc.usp.br/index.php/SICEM/sicem2018/paper/view/1231/906
Artigo de periodico
Resistance upset welding of Zr-based bulk metallic glasses (2018)
Andreoli, Angelo Fernandes; Ponsoni, Jéssica Bruna; Soares, Carolina ; Oliveira, Marcelo Falcão de ; Kiminami, Claudio Shyinti
Source: Journal of Materials Processing Technology. Unidade: EESC
Subjects: SOLDAGEM, VIDROS METÁLICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANDREOLI, Angelo Fernandes et al. Resistance upset welding of Zr-based bulk metallic glasses. Journal of Materials Processing Technology, v. 255, p. 760-764, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2018.01.034. Acesso em: 05 nov. 2024.
APA
Andreoli, A. F., Ponsoni, J. B., Soares, C., Oliveira, M. F. de, & Kiminami, C. S. (2018). Resistance upset welding of Zr-based bulk metallic glasses. Journal of Materials Processing Technology, 255, 760-764. doi:10.1016/j.jmatprotec.2018.01.034
NLM
Andreoli AF, Ponsoni JB, Soares C, Oliveira MF de, Kiminami CS. Resistance upset welding of Zr-based bulk metallic glasses [Internet]. Journal of Materials Processing Technology. 2018 ; 255 760-764.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.01.034
Vancouver
Andreoli AF, Ponsoni JB, Soares C, Oliveira MF de, Kiminami CS. Resistance upset welding of Zr-based bulk metallic glasses [Internet]. Journal of Materials Processing Technology. 2018 ; 255 760-764.[citado 2024 nov. 05 ] Available from: https://doi.org/10.1016/j.jmatprotec.2018.01.034

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration