ReP USP - Resultado da busca

Artigo de periodico
Characterization of inconel and stainless steel coatings produced through directed energy deposition method using coarse powders (2022)
Silva, Douglas da; Spinelli, José Eduardo; Freitas, Brenda Juliet Martins; Mariani, Fabio Edson; Coelho, Reginaldo Teixeira ; Casteletti, Luiz Carlos
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: LIGAS METÁLICAS, AÇO INOXIDÁVEL, NÍQUEL, REVESTIMENTOS, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Douglas da et al. Characterization of inconel and stainless steel coatings produced through directed energy deposition method using coarse powders. Journal of Materials Engineering and Performance, p. 1-11, 2022Tradução . . Disponível em: https://doi.org/10.1007/s11665-022-07711-6. Acesso em: 04 out. 2024.
APA
Silva, D. da, Spinelli, J. E., Freitas, B. J. M., Mariani, F. E., Coelho, R. T., & Casteletti, L. C. (2022). Characterization of inconel and stainless steel coatings produced through directed energy deposition method using coarse powders. Journal of Materials Engineering and Performance, 1-11. doi:10.1007/s11665-022-07711-6
NLM
Silva D da, Spinelli JE, Freitas BJM, Mariani FE, Coelho RT, Casteletti LC. Characterization of inconel and stainless steel coatings produced through directed energy deposition method using coarse powders [Internet]. Journal of Materials Engineering and Performance. 2022 ; 1-11.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-022-07711-6
Vancouver
Silva D da, Spinelli JE, Freitas BJM, Mariani FE, Coelho RT, Casteletti LC. Characterization of inconel and stainless steel coatings produced through directed energy deposition method using coarse powders [Internet]. Journal of Materials Engineering and Performance. 2022 ; 1-11.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-022-07711-6
Artigo de periodico
Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel (2021)
Souza, Adriel Magalhães; Ferreira, Rodrigo; Barragán, German; Grass Nuñez, Johan; Mariani, Fábio Edson; Silva, Eraldo Jannone da ; Coelho, Reginaldo Teixeira
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Adriel Magalhães et al. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, p. 1-14, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05991-y. Acesso em: 04 out. 2024.
APA
Souza, A. M., Ferreira, R., Barragán, G., Grass Nuñez, J., Mariani, F. E., Silva, E. J. da, & Coelho, R. T. (2021). Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel. Journal of Materials Engineering and Performance, 1-14. doi:10.1007/s11665-021-05991-y
NLM
Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05991-y
Vancouver
Souza AM, Ferreira R, Barragán G, Grass Nuñez J, Mariani FE, Silva EJ da, Coelho RT. Effects of laser polishing on surface characteristics and wettability of directed energy-deposited 316L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-14.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05991-y
Artigo de periodico
Characterization and optimization of process parameters for directed energy deposition powder-fed laser system (2021)
Barragan De Los Rios, German Alberto; Rojas Perilla, Daniel Andres; Grass Nuñez, Johan; Mariani, Fábio Edson; Coelho, Reginaldo Teixeira
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: MANUFATURA, LASER
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARRAGAN DE LOS RIOS, German Alberto et al. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05762-9. Acesso em: 04 out. 2024.
APA
Barragan De Los Rios, G. A., Rojas Perilla, D. A., Grass Nuñez, J., Mariani, F. E., & Coelho, R. T. (2021). Characterization and optimization of process parameters for directed energy deposition powder-fed laser system. Journal of Materials Engineering and Performance, 1-10. doi:10.1007/s11665-021-05762-9
NLM
Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
Vancouver
Barragan De Los Rios GA, Rojas Perilla DA, Grass Nuñez J, Mariani FE, Coelho RT. Characterization and optimization of process parameters for directed energy deposition powder-fed laser system [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-10.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05762-9
Artigo de periodico
Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel (2021)
Mariani, Fábio Edson; Ribeiro, Kandice Suane Barros; Lombardi Neto, Amadeu ; Casteletti, Luiz Carlos ; Coelho, Reginaldo Teixeira
Source: Journal of Materials Engineering and Performance. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, MANUFATURA, SUPERFÍCIES, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, p. 1-9, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11665-021-05962-3. Acesso em: 04 out. 2024.
APA
Mariani, F. E., Ribeiro, K. S. B., Lombardi Neto, A., Casteletti, L. C., & Coelho, R. T. (2021). Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel. Journal of Materials Engineering and Performance, 1-9. doi:10.1007/s11665-021-05962-3
NLM
Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05962-3
Vancouver
Mariani FE, Ribeiro KSB, Lombardi Neto A, Casteletti LC, Coelho RT. Effect of laser polishing post-processing technique on the roughness and wear resistance of inconel 625 deposited by laser cladding on AISI 304L stainless steel [Internet]. Journal of Materials Engineering and Performance. 2021 ; 1-9.[citado 2024 out. 04 ] Available from: https://doi.org/10.1007/s11665-021-05962-3
Artigo de periodico
Size effect and minimum chip thickness in micromilling (2015)
Oliveira, Fernando Brandão de; Rodrigues, Alessandro Roger; Coelho, Reginaldo Teixeira; Souza, Adriano Fagali de
Source: International Journal of Machine Tools & Manufacture. Unidade: EESC
Assunto: FRESAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Fernando Brandão de et al. Size effect and minimum chip thickness in micromilling. International Journal of Machine Tools & Manufacture, v. 89, p. 39-54, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.ijmachtools.2014.11.001. Acesso em: 04 out. 2024.
APA
Oliveira, F. B. de, Rodrigues, A. R., Coelho, R. T., & Souza, A. F. de. (2015). Size effect and minimum chip thickness in micromilling. International Journal of Machine Tools & Manufacture, 89, 39-54. doi:10.1016/j.ijmachtools.2014.11.001
NLM
Oliveira FB de, Rodrigues AR, Coelho RT, Souza AF de. Size effect and minimum chip thickness in micromilling [Internet]. International Journal of Machine Tools & Manufacture. 2015 ; 89 39-54.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/j.ijmachtools.2014.11.001
Vancouver
Oliveira FB de, Rodrigues AR, Coelho RT, Souza AF de. Size effect and minimum chip thickness in micromilling [Internet]. International Journal of Machine Tools & Manufacture. 2015 ; 89 39-54.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/j.ijmachtools.2014.11.001
Artigo de periodico
A contribution to improve the accuracy of chatter prediction in machine tools using the stability lobe diagram (2014)
Santos, Raphael Galdino dos; Coelho, Reginaldo Teixeira
Source: Journal of Manufacturing Science and Engineering. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Raphael Galdino dos e COELHO, Reginaldo Teixeira. A contribution to improve the accuracy of chatter prediction in machine tools using the stability lobe diagram. Journal of Manufacturing Science and Engineering, v. 136, n. 2, p. 1-7, 2014Tradução . . Disponível em: https://doi.org/10.1115/1.4025514. Acesso em: 04 out. 2024.
APA
Santos, R. G. dos, & Coelho, R. T. (2014). A contribution to improve the accuracy of chatter prediction in machine tools using the stability lobe diagram. Journal of Manufacturing Science and Engineering, 136( 2), 1-7. doi:10.1115/1.4025514
NLM
Santos RG dos, Coelho RT. A contribution to improve the accuracy of chatter prediction in machine tools using the stability lobe diagram [Internet]. Journal of Manufacturing Science and Engineering. 2014 ; 136( 2): 1-7.[citado 2024 out. 04 ] Available from: https://doi.org/10.1115/1.4025514
Vancouver
Santos RG dos, Coelho RT. A contribution to improve the accuracy of chatter prediction in machine tools using the stability lobe diagram [Internet]. Journal of Manufacturing Science and Engineering. 2014 ; 136( 2): 1-7.[citado 2024 out. 04 ] Available from: https://doi.org/10.1115/1.4025514
Artigo de periodico
Processing of threads on a magnesium alloy using a special process (2014)
Dias, Lucas Donizete; Brandão, Lincoln Cardoso; Ribeiro Filho, Sergio Luiz Moni; Coelho, Reginaldo Teixeira
Source: Materials and Manufacturing Processes. Unidade: EESC
Subjects: MANUFATURA, CORTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Lucas Donizete et al. Processing of threads on a magnesium alloy using a special process. Materials and Manufacturing Processes, v. 29, p. 748-753, 2014Tradução . . Disponível em: https://doi.org/10.1080/10426914.2014.901533. Acesso em: 04 out. 2024.
APA
Dias, L. D., Brandão, L. C., Ribeiro Filho, S. L. M., & Coelho, R. T. (2014). Processing of threads on a magnesium alloy using a special process. Materials and Manufacturing Processes, 29, 748-753. doi:10.1080/10426914.2014.901533
NLM
Dias LD, Brandão LC, Ribeiro Filho SLM, Coelho RT. Processing of threads on a magnesium alloy using a special process [Internet]. Materials and Manufacturing Processes. 2014 ; 29 748-753.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/10426914.2014.901533
Vancouver
Dias LD, Brandão LC, Ribeiro Filho SLM, Coelho RT. Processing of threads on a magnesium alloy using a special process [Internet]. Materials and Manufacturing Processes. 2014 ; 29 748-753.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/10426914.2014.901533
Trabalho de evento
Regenerative chatter reduction through passive damping: numerical evaluation (2010)
Silva, Maíra Martins da; Cervelin, José Eduardo; Santos, Raphael Galdino dos; Coelho, Reginaldo Teixeira
Conference titles: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). Unidade: EESC
Subjects: TORNEAMENTO, PIEZOELETRICIDADE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Maíra Martins da et al. Regenerative chatter reduction through passive damping: numerical evaluation. 2010, Anais.. Piscataway: IEEE, 2010. Disponível em: https://doi.org/10.1109/AIM.2010.5695750. Acesso em: 04 out. 2024.
APA
Silva, M. M. da, Cervelin, J. E., Santos, R. G. dos, & Coelho, R. T. (2010). Regenerative chatter reduction through passive damping: numerical evaluation. In . Piscataway: IEEE. doi:10.1109/AIM.2010.5695750
NLM
Silva MM da, Cervelin JE, Santos RG dos, Coelho RT. Regenerative chatter reduction through passive damping: numerical evaluation [Internet]. 2010 ;[citado 2024 out. 04 ] Available from: https://doi.org/10.1109/AIM.2010.5695750
Vancouver
Silva MM da, Cervelin JE, Santos RG dos, Coelho RT. Regenerative chatter reduction through passive damping: numerical evaluation [Internet]. 2010 ;[citado 2024 out. 04 ] Available from: https://doi.org/10.1109/AIM.2010.5695750
Trabalho de evento
Different techniques for producing precision holes (> 20 mm) in hardened steel: comparative results (2009)
Coelho, Reginaldo Teixeira ; Tanikawa, S. T.
Source: Proceedings. Conference titles: Manufacturing Engineering Society International Conferenc. Unidade: EESC
Subjects: USINAGEM, FRESAGEM, AÇO, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e TANIKAWA, S. T. Different techniques for producing precision holes (> 20 mm) in hardened steel: comparative results. 2009, Anais.. College Park, MD, USA: American Institute of Physics, 2009. Disponível em: https://repositorio.usp.br/directbitstream/b2b2c3b3-0f28-43f6-af4b-963ca0f00a99/art04.pdf. Acesso em: 04 out. 2024.
APA
Coelho, R. T., & Tanikawa, S. T. (2009). Different techniques for producing precision holes (> 20 mm) in hardened steel: comparative results. In Proceedings. College Park, MD, USA: American Institute of Physics. Recuperado de https://repositorio.usp.br/directbitstream/b2b2c3b3-0f28-43f6-af4b-963ca0f00a99/art04.pdf
NLM
Coelho RT, Tanikawa ST. Different techniques for producing precision holes (> 20 mm) in hardened steel: comparative results [Internet]. Proceedings. 2009 ;[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/b2b2c3b3-0f28-43f6-af4b-963ca0f00a99/art04.pdf
Vancouver
Coelho RT, Tanikawa ST. Different techniques for producing precision holes (> 20 mm) in hardened steel: comparative results [Internet]. Proceedings. 2009 ;[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/b2b2c3b3-0f28-43f6-af4b-963ca0f00a99/art04.pdf
Artigo de periodico
Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions (2007)
Coelho, Reginaldo Teixeira; Ng, Eu-Gene; Elbestawi, M. A.; Coelho, Reginaldo Teixeira
Source: International Journal of Machine Tools and Manufacture. Unidade: EESC
Subjects: AÇO DE ALTA RESISTÊNCIA, REVESTIMENTO DE SUPERFÍCIES, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions. International Journal of Machine Tools and Manufacture, v. 47, n. 2, p. 263-272, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.ijmachtools.2006.03.020. Acesso em: 04 out. 2024.
APA
Coelho, R. T., Ng, E. -G., Elbestawi, M. A., & Coelho, R. T. (2007). Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions. International Journal of Machine Tools and Manufacture, 47( 2), 263-272. doi:10.1016/j.ijmachtools.2006.03.020
NLM
Coelho RT, Ng E-G, Elbestawi MA, Coelho RT. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions [Internet]. International Journal of Machine Tools and Manufacture. 2007 ; 47( 2): 263-272.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/j.ijmachtools.2006.03.020
Vancouver
Coelho RT, Ng E-G, Elbestawi MA, Coelho RT. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions [Internet]. International Journal of Machine Tools and Manufacture. 2007 ; 47( 2): 263-272.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/j.ijmachtools.2006.03.020
Artigo de periodico
An experimental investigation on wear aspects of tapping operation on hardened steels (2006)
Coelho, Reginaldo Teixeira; Arai, Ricardo; Watanuki, Hugo Martinelli ; Borges, Emanuel
Source: Machining Science and Technology. Unidade: EESC
Subjects: AÇO, AÇO FERRAMENTA, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. An experimental investigation on wear aspects of tapping operation on hardened steels. Machining Science and Technology, v. 10, n. 2, p. 235-250, 2006Tradução . . Disponível em: https://doi.org/10.1080/10910340600710097. Acesso em: 04 out. 2024.
APA
Coelho, R. T., Arai, R., Watanuki, H. M., & Borges, E. (2006). An experimental investigation on wear aspects of tapping operation on hardened steels. Machining Science and Technology, 10( 2), 235-250. doi:10.1080/10910340600710097
NLM
Coelho RT, Arai R, Watanuki HM, Borges E. An experimental investigation on wear aspects of tapping operation on hardened steels [Internet]. Machining Science and Technology. 2006 ; 10( 2): 235-250.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/10910340600710097
Vancouver
Coelho RT, Arai R, Watanuki HM, Borges E. An experimental investigation on wear aspects of tapping operation on hardened steels [Internet]. Machining Science and Technology. 2006 ; 10( 2): 235-250.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/10910340600710097
Trabalho de evento-anais periodico
The evaluation of specific energy in chip formation using the principle of a charply test machine (2004)
Coelho, Reginaldo Teixeira ; Rodrigues, Alessandro Roger
Source: Transactions of the North American Manufacturing Research Conference. Conference titles: North American Manufacturing Research Conference - NAMRC 45. Unidade: EESC
Subjects: METAIS, CAVACOS, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e RODRIGUES, Alessandro Roger. The evaluation of specific energy in chip formation using the principle of a charply test machine. Transactions of the North American Manufacturing Research Conference. Dearborn, MI, USA: Society of Manufacturing Engineers. Disponível em: https://repositorio.usp.br/directbitstream/0d26a27f-f76c-4e30-854b-cb3412e0f6cf/INSTRUCTIONS%20FOR%20PREPARING%20A%20NAMRI_SME%20PAPER_removed.pdf. Acesso em: 04 out. 2024. , 2004
APA
Coelho, R. T., & Rodrigues, A. R. (2004). The evaluation of specific energy in chip formation using the principle of a charply test machine. Transactions of the North American Manufacturing Research Conference. Dearborn, MI, USA: Society of Manufacturing Engineers. Recuperado de https://repositorio.usp.br/directbitstream/0d26a27f-f76c-4e30-854b-cb3412e0f6cf/INSTRUCTIONS%20FOR%20PREPARING%20A%20NAMRI_SME%20PAPER_removed.pdf
NLM
Coelho RT, Rodrigues AR. The evaluation of specific energy in chip formation using the principle of a charply test machine [Internet]. Transactions of the North American Manufacturing Research Conference. 2004 ; 32 255-262.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/0d26a27f-f76c-4e30-854b-cb3412e0f6cf/INSTRUCTIONS%20FOR%20PREPARING%20A%20NAMRI_SME%20PAPER_removed.pdf
Vancouver
Coelho RT, Rodrigues AR. The evaluation of specific energy in chip formation using the principle of a charply test machine [Internet]. Transactions of the North American Manufacturing Research Conference. 2004 ; 32 255-262.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/0d26a27f-f76c-4e30-854b-cb3412e0f6cf/INSTRUCTIONS%20FOR%20PREPARING%20A%20NAMRI_SME%20PAPER_removed.pdf
Trabalho de evento-anais periodico
Monitoring machining conditions by infrared images (2001)
Borelli, João Eduardo; Trabasso, Luís Gonzaga; Gonzaga, Adilson; Coelho, Reginaldo Teixeira
Source: Proceedings of SPIE. Conference titles: Thermosense. Unidade: EESC
Subjects: PROCESSAMENTO DE IMAGENS, INFRAVERMELHO, LÓGICA FUZZY
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BORELLI, João Eduardo et al. Monitoring machining conditions by infrared images. Proceedings of SPIE. Bellingham: Escola de Engenharia de São Carlos, Universidade de São Paulo. . Acesso em: 04 out. 2024. , 2001
APA
Borelli, J. E., Trabasso, L. G., Gonzaga, A., & Coelho, R. T. (2001). Monitoring machining conditions by infrared images. Proceedings of SPIE. Bellingham: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Borelli JE, Trabasso LG, Gonzaga A, Coelho RT. Monitoring machining conditions by infrared images. Proceedings of SPIE. 2001 ; 4360 90-94.[citado 2024 out. 04 ]
Vancouver
Borelli JE, Trabasso LG, Gonzaga A, Coelho RT. Monitoring machining conditions by infrared images. Proceedings of SPIE. 2001 ; 4360 90-94.[citado 2024 out. 04 ]
Artigo de periodico
The application of acoustic emission (AE) techniques on the dressing operation using synthetic diamonds and sintered tools (2001)
Coelho, Reginaldo Teixeira; Oliveira, João Fernando Gomes de; Marinelli Filho, Nelson
Source: Abrasives Magazines. Unidade: EESC
Subjects: USINAGEM, ELEMENTOS DE MÁQUINAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e OLIVEIRA, João Fernando Gomes de e MARINELLI FILHO, Nelson. The application of acoustic emission (AE) techniques on the dressing operation using synthetic diamonds and sintered tools. Abrasives Magazines, p. 22-30, 2001Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/c2ecfd1f-57d0-4d65-b8f8-9c06c51c3f2c/PROD_001820_SYSNO_1223976.pdf. Acesso em: 04 out. 2024.
APA
Coelho, R. T., Oliveira, J. F. G. de, & Marinelli Filho, N. (2001). The application of acoustic emission (AE) techniques on the dressing operation using synthetic diamonds and sintered tools. Abrasives Magazines, 22-30. Recuperado de https://repositorio.usp.br/directbitstream/c2ecfd1f-57d0-4d65-b8f8-9c06c51c3f2c/PROD_001820_SYSNO_1223976.pdf
NLM
Coelho RT, Oliveira JFG de, Marinelli Filho N. The application of acoustic emission (AE) techniques on the dressing operation using synthetic diamonds and sintered tools [Internet]. Abrasives Magazines. 2001 ; 22-30.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/c2ecfd1f-57d0-4d65-b8f8-9c06c51c3f2c/PROD_001820_SYSNO_1223976.pdf
Vancouver
Coelho RT, Oliveira JFG de, Marinelli Filho N. The application of acoustic emission (AE) techniques on the dressing operation using synthetic diamonds and sintered tools [Internet]. Abrasives Magazines. 2001 ; 22-30.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/c2ecfd1f-57d0-4d65-b8f8-9c06c51c3f2c/PROD_001820_SYSNO_1223976.pdf
Artigo de periodico
A new system to get information about the grinding wheel performance (2000)
Oliveira, João Fernando Gomes de; Coelho, Reginaldo Teixeira; Tundisi, José Eduardo Matsumura; Gomes, João Jorge F; Bellini, Paulo
Source: Abrasives Magazine. Unidade: EESC
Subjects: USINAGEM, ELEMENTOS DE MÁQUINAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, João Fernando Gomes de et al. A new system to get information about the grinding wheel performance. Abrasives Magazine, p. 24-30, 2000Tradução . . Acesso em: 04 out. 2024.
APA
Oliveira, J. F. G. de, Coelho, R. T., Tundisi, J. E. M., Gomes, J. J. F., & Bellini, P. (2000). A new system to get information about the grinding wheel performance. Abrasives Magazine, 24-30.
NLM
Oliveira JFG de, Coelho RT, Tundisi JEM, Gomes JJF, Bellini P. A new system to get information about the grinding wheel performance. Abrasives Magazine. 2000 ; 24-30.[citado 2024 out. 04 ]
Vancouver
Oliveira JFG de, Coelho RT, Tundisi JEM, Gomes JJF, Bellini P. A new system to get information about the grinding wheel performance. Abrasives Magazine. 2000 ; 24-30.[citado 2024 out. 04 ]
Artigo de periodico
Experimental and theoretical study of the temperature distribution on diamond dressing tools for precision grinding (2000)
Coelho, Reginaldo Teixeira; Oliveira, João Fernando Gomes de; Campos, Gislaine Pereira de
Source: Abrasives Magazine. Unidade: EESC
Subjects: USINAGEM, FERRAMENTAS, AUTOMAÇÃO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e OLIVEIRA, João Fernando Gomes de e CAMPOS, Gislaine Pereira de. Experimental and theoretical study of the temperature distribution on diamond dressing tools for precision grinding. Abrasives Magazine, p. 8-17, 2000Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/e2fe49de-737b-447a-bccf-196e0a0df209/PROD_001825_SYSNO_1137778%20%281%29.pdf. Acesso em: 04 out. 2024.
APA
Coelho, R. T., Oliveira, J. F. G. de, & Campos, G. P. de. (2000). Experimental and theoretical study of the temperature distribution on diamond dressing tools for precision grinding. Abrasives Magazine, 8-17. Recuperado de https://repositorio.usp.br/directbitstream/e2fe49de-737b-447a-bccf-196e0a0df209/PROD_001825_SYSNO_1137778%20%281%29.pdf
NLM
Coelho RT, Oliveira JFG de, Campos GP de. Experimental and theoretical study of the temperature distribution on diamond dressing tools for precision grinding [Internet]. Abrasives Magazine. 2000 ; 8-17.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/e2fe49de-737b-447a-bccf-196e0a0df209/PROD_001825_SYSNO_1137778%20%281%29.pdf
Vancouver
Coelho RT, Oliveira JFG de, Campos GP de. Experimental and theoretical study of the temperature distribution on diamond dressing tools for precision grinding [Internet]. Abrasives Magazine. 2000 ; 8-17.[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/e2fe49de-737b-447a-bccf-196e0a0df209/PROD_001825_SYSNO_1137778%20%281%29.pdf
Artigo de periodico
Development of an optical scanner to study wear on the working surface of grinding wheels (1999)
Oliveira, João Fernando Gomes de; Coelho, Reginaldo Teixeira; Klein Neto, Carlos
Source: Machining Science and Technology. Unidade: EESC
Assunto: DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, João Fernando Gomes de e COELHO, Reginaldo Teixeira e KLEIN NETO, Carlos. Development of an optical scanner to study wear on the working surface of grinding wheels. Machining Science and Technology, v. 3, n. 2, p. 239-253, 1999Tradução . . Disponível em: https://doi.org/10.1080/1094034990894569. Acesso em: 04 out. 2024.
APA
Oliveira, J. F. G. de, Coelho, R. T., & Klein Neto, C. (1999). Development of an optical scanner to study wear on the working surface of grinding wheels. Machining Science and Technology, 3( 2), 239-253. doi:10.1080/1094034990894569
NLM
Oliveira JFG de, Coelho RT, Klein Neto C. Development of an optical scanner to study wear on the working surface of grinding wheels [Internet]. Machining Science and Technology. 1999 ; 3( 2): 239-253.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/1094034990894569
Vancouver
Oliveira JFG de, Coelho RT, Klein Neto C. Development of an optical scanner to study wear on the working surface of grinding wheels [Internet]. Machining Science and Technology. 1999 ; 3( 2): 239-253.[citado 2024 out. 04 ] Available from: https://doi.org/10.1080/1094034990894569
Artigo de periodico
Intelligent grinding systems (IGS): high reliability and automation level in precision grinding (1998)
Oliveira, João Fernando Gomes de; Felipe Júnior, Juarez; Coelho, Reginaldo Teixeira; Gomes, João Jorge Faria
Source: Abrasives Magazine. Unidade: EESC
Assunto: AUTOMAÇÃO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, João Fernando Gomes de et al. Intelligent grinding systems (IGS): high reliability and automation level in precision grinding. Abrasives Magazine, p. 11-22, 1998Tradução . . Acesso em: 04 out. 2024.
APA
Oliveira, J. F. G. de, Felipe Júnior, J., Coelho, R. T., & Gomes, J. J. F. (1998). Intelligent grinding systems (IGS): high reliability and automation level in precision grinding. Abrasives Magazine, 11-22.
NLM
Oliveira JFG de, Felipe Júnior J, Coelho RT, Gomes JJF. Intelligent grinding systems (IGS): high reliability and automation level in precision grinding. Abrasives Magazine. 1998 ; 11-22.[citado 2024 out. 04 ]
Vancouver
Oliveira JFG de, Felipe Júnior J, Coelho RT, Gomes JJF. Intelligent grinding systems (IGS): high reliability and automation level in precision grinding. Abrasives Magazine. 1998 ; 11-22.[citado 2024 out. 04 ]
Trabalho de evento
Investigation into the behaviour of ceramic materials under scretching test using acoustic emission (1996)
Coelho, Reginaldo Teixeira; Sanchez, L E A; Oliveira, João Fernando Gomes de; Seleghim Júnior, Paulo
Source: Proceedings. Conference titles: International Manufacturing Engineering Conference. Unidade: EESC
Assunto: MATERIAIS CERÂMICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. Investigation into the behaviour of ceramic materials under scretching test using acoustic emission. 1996, Anais.. Storrs: University of Connecticut, 1996. Disponível em: https://repositorio.usp.br/directbitstream/fcef5f03-c3cd-4b00-b99b-ecfb7e03995a/prod_001832_sysno_0912734.pdf. Acesso em: 04 out. 2024.
APA
Coelho, R. T., Sanchez, L. E. A., Oliveira, J. F. G. de, & Seleghim Júnior, P. (1996). Investigation into the behaviour of ceramic materials under scretching test using acoustic emission. In Proceedings. Storrs: University of Connecticut. Recuperado de https://repositorio.usp.br/directbitstream/fcef5f03-c3cd-4b00-b99b-ecfb7e03995a/prod_001832_sysno_0912734.pdf
NLM
Coelho RT, Sanchez LEA, Oliveira JFG de, Seleghim Júnior P. Investigation into the behaviour of ceramic materials under scretching test using acoustic emission [Internet]. Proceedings. 1996 ;[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/fcef5f03-c3cd-4b00-b99b-ecfb7e03995a/prod_001832_sysno_0912734.pdf
Vancouver
Coelho RT, Sanchez LEA, Oliveira JFG de, Seleghim Júnior P. Investigation into the behaviour of ceramic materials under scretching test using acoustic emission [Internet]. Proceedings. 1996 ;[citado 2024 out. 04 ] Available from: https://repositorio.usp.br/directbitstream/fcef5f03-c3cd-4b00-b99b-ecfb7e03995a/prod_001832_sysno_0912734.pdf

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Indexado em

Non normalized affiliation