ReP USP - Resultado da busca

Artigo de periodico
Quenchants derived from vegetable oils as alternatives to petroleum oil (2011)
Souza, Ester Carvalho de; Canale, Lauralice de Campos Franceschini; Totten, George Edward
Source: Industrial Heating. Unidade: EESC
Subjects: TRATAMENTO TÉRMICO, TÊMPERA (ENGENHARIA), ÓLEOS VEGETAIS COMO COMBUSTÍVEIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Ester Carvalho de e CANALE, Lauralice de Campos Franceschini e TOTTEN, George Edward. Quenchants derived from vegetable oils as alternatives to petroleum oil. Industrial Heating, v. 79, n. 9, p. 45-48, 2011Tradução . . Disponível em: http://proquest.umi.com/pqdweb?index=18&did=2446103041&SrchMode=3&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1316439173&clientId=18110&aid=1. Acesso em: 04 out. 2024.
APA
Souza, E. C. de, Canale, L. de C. F., & Totten, G. E. (2011). Quenchants derived from vegetable oils as alternatives to petroleum oil. Industrial Heating, 79( 9), 45-48. Recuperado de http://proquest.umi.com/pqdweb?index=18&did=2446103041&SrchMode=3&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1316439173&clientId=18110&aid=1
NLM
Souza EC de, Canale L de CF, Totten GE. Quenchants derived from vegetable oils as alternatives to petroleum oil [Internet]. Industrial Heating. 2011 ; 79( 9): 45-48.[citado 2024 out. 04 ] Available from: http://proquest.umi.com/pqdweb?index=18&did=2446103041&SrchMode=3&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1316439173&clientId=18110&aid=1
Vancouver
Souza EC de, Canale L de CF, Totten GE. Quenchants derived from vegetable oils as alternatives to petroleum oil [Internet]. Industrial Heating. 2011 ; 79( 9): 45-48.[citado 2024 out. 04 ] Available from: http://proquest.umi.com/pqdweb?index=18&did=2446103041&SrchMode=3&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1316439173&clientId=18110&aid=1
Artigo de periodico
Microstructural assessment of cancellous bone using 3D microtomography (2011)
Silva, A. M. H.; Alves, José Marcos; Silva, Orivaldo Lopes da; Silva Júnior, Nelson Ferreira de; Gazziro, Mário; Pereira, José Carlos; Lasso, Paulo Renato Orlandi; Vaz, Carlos Manoel Pedro; Pereira, C. A. M.; Leivas, Tomaz Puga; Guarniero, Roberto
Source: Journal of Physics : conference series. Unidades: EESC, FM
Subjects: MICROTOMOGRAFIA (AVALIAÇÃO), OSSO E OSSOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, A. M. H. et al. Microstructural assessment of cancellous bone using 3D microtomography. Journal of Physics : conference series, v. 313, p. 1-10, 2011Tradução . . Disponível em: https://doi.org/10.1088/1742-6596/313/1/012008. Acesso em: 04 out. 2024.
APA
Silva, A. M. H., Alves, J. M., Silva, O. L. da, Silva Júnior, N. F. de, Gazziro, M., Pereira, J. C., et al. (2011). Microstructural assessment of cancellous bone using 3D microtomography. Journal of Physics : conference series, 313, 1-10. doi:10.1088/1742-6596/313/1/012008
NLM
Silva AMH, Alves JM, Silva OL da, Silva Júnior NF de, Gazziro M, Pereira JC, Lasso PRO, Vaz CMP, Pereira CAM, Leivas TP, Guarniero R. Microstructural assessment of cancellous bone using 3D microtomography [Internet]. Journal of Physics : conference series. 2011 ; 313 1-10.[citado 2024 out. 04 ] Available from: https://doi.org/10.1088/1742-6596/313/1/012008
Vancouver
Silva AMH, Alves JM, Silva OL da, Silva Júnior NF de, Gazziro M, Pereira JC, Lasso PRO, Vaz CMP, Pereira CAM, Leivas TP, Guarniero R. Microstructural assessment of cancellous bone using 3D microtomography [Internet]. Journal of Physics : conference series. 2011 ; 313 1-10.[citado 2024 out. 04 ] Available from: https://doi.org/10.1088/1742-6596/313/1/012008
Artigo de periodico
Dendritic arm spacing affecting mechanical properties and wear behavior of 'AL'-'SN' and 'AL'-'SI' alloys directionally solidified under unsteady-state conditions (2010)
Cruz, Kleber Agustin Sabat da; Meza, Elisangela dos Santos; Fernandes, Frederico Augusto Pires; Quaresma, José Maria do Vale; Casteletti, Luiz Carlos; Garcia, Amauri
Source: Metallurgical and Materials Transactions A. Unidade: EESC
Subjects: PROPRIEDADES DOS MATERIAIS, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CRUZ, Kleber Agustin Sabat da et al. Dendritic arm spacing affecting mechanical properties and wear behavior of 'AL'-'SN' and 'AL'-'SI' alloys directionally solidified under unsteady-state conditions. Metallurgical and Materials Transactions A, v. 41, n. 4, p. 972-984, 2010Tradução . . Disponível em: http://www.springerlink.com/content/h011606162518wh2/fulltext.pdf. Acesso em: 04 out. 2024.
APA
Cruz, K. A. S. da, Meza, E. dos S., Fernandes, F. A. P., Quaresma, J. M. do V., Casteletti, L. C., & Garcia, A. (2010). Dendritic arm spacing affecting mechanical properties and wear behavior of 'AL'-'SN' and 'AL'-'SI' alloys directionally solidified under unsteady-state conditions. Metallurgical and Materials Transactions A, 41( 4), 972-984. Recuperado de http://www.springerlink.com/content/h011606162518wh2/fulltext.pdf
NLM
Cruz KAS da, Meza E dos S, Fernandes FAP, Quaresma JM do V, Casteletti LC, Garcia A. Dendritic arm spacing affecting mechanical properties and wear behavior of 'AL'-'SN' and 'AL'-'SI' alloys directionally solidified under unsteady-state conditions [Internet]. Metallurgical and Materials Transactions A. 2010 ; 41( 4): 972-984.[citado 2024 out. 04 ] Available from: http://www.springerlink.com/content/h011606162518wh2/fulltext.pdf
Vancouver
Cruz KAS da, Meza E dos S, Fernandes FAP, Quaresma JM do V, Casteletti LC, Garcia A. Dendritic arm spacing affecting mechanical properties and wear behavior of 'AL'-'SN' and 'AL'-'SI' alloys directionally solidified under unsteady-state conditions [Internet]. Metallurgical and Materials Transactions A. 2010 ; 41( 4): 972-984.[citado 2024 out. 04 ] Available from: http://www.springerlink.com/content/h011606162518wh2/fulltext.pdf
Artigo de periodico
Effect of the HVOF deposition process in the chemical composition of tungsten carbide layers with cobalt or nickel binders (2010)
Casteletti, Luiz Carlos; Arnoni, Eduardo Augusto Brefere; Fernandes, Frederico Augusto Pires; Lombardi Neto, Amadeu; Totten, George Edward
Source: Journal of ASTM International. Unidade: EESC
Subjects: TUNGSTÊNIO, LIGANTES, COBALTO, NÍQUEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Effect of the HVOF deposition process in the chemical composition of tungsten carbide layers with cobalt or nickel binders. Journal of ASTM International, v. 7, n. 3, p. 1-10, 2010Tradução . . Disponível em: http://65.209.24.102/DOWNLOAD/JAI102606-DL.13560-1.pdf. Acesso em: 04 out. 2024.
APA
Casteletti, L. C., Arnoni, E. A. B., Fernandes, F. A. P., Lombardi Neto, A., & Totten, G. E. (2010). Effect of the HVOF deposition process in the chemical composition of tungsten carbide layers with cobalt or nickel binders. Journal of ASTM International, 7( 3), 1-10. Recuperado de http://65.209.24.102/DOWNLOAD/JAI102606-DL.13560-1.pdf
NLM
Casteletti LC, Arnoni EAB, Fernandes FAP, Lombardi Neto A, Totten GE. Effect of the HVOF deposition process in the chemical composition of tungsten carbide layers with cobalt or nickel binders [Internet]. Journal of ASTM International. 2010 ; 7( 3): 1-10.[citado 2024 out. 04 ] Available from: http://65.209.24.102/DOWNLOAD/JAI102606-DL.13560-1.pdf
Vancouver
Casteletti LC, Arnoni EAB, Fernandes FAP, Lombardi Neto A, Totten GE. Effect of the HVOF deposition process in the chemical composition of tungsten carbide layers with cobalt or nickel binders [Internet]. Journal of ASTM International. 2010 ; 7( 3): 1-10.[citado 2024 out. 04 ] Available from: http://65.209.24.102/DOWNLOAD/JAI102606-DL.13560-1.pdf
Artigo de periodico
Use of 'FE'-31'MN'-7.5'AL'-1.3'SI'-0.9'C' alloy for fabrication of resistive elements (2010)
Casteletti, Luiz Carlos; Lombardi Neto, Amadeu; Totten, George Edward; Heck, Stenio Cristaldo; Fernandes, Frederico Augusto Pires
Source: Journal of ASTM International. Unidade: EESC
Assunto: OXIDAÇÃO (PROPRIEDADES ELÉTRICAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Use of 'FE'-31'MN'-7.5'AL'-1.3'SI'-0.9'C' alloy for fabrication of resistive elements. Journal of ASTM International, v. 7, n. 2, p. 1-4, 2010Tradução . . Disponível em: http://65.209.24.102/DOWNLOAD/JAI102605-DL.1108-1.pdf. Acesso em: 04 out. 2024.
APA
Casteletti, L. C., Lombardi Neto, A., Totten, G. E., Heck, S. C., & Fernandes, F. A. P. (2010). Use of 'FE'-31'MN'-7.5'AL'-1.3'SI'-0.9'C' alloy for fabrication of resistive elements. Journal of ASTM International, 7( 2), 1-4. Recuperado de http://65.209.24.102/DOWNLOAD/JAI102605-DL.1108-1.pdf
NLM
Casteletti LC, Lombardi Neto A, Totten GE, Heck SC, Fernandes FAP. Use of 'FE'-31'MN'-7.5'AL'-1.3'SI'-0.9'C' alloy for fabrication of resistive elements [Internet]. Journal of ASTM International. 2010 ; 7( 2): 1-4.[citado 2024 out. 04 ] Available from: http://65.209.24.102/DOWNLOAD/JAI102605-DL.1108-1.pdf
Vancouver
Casteletti LC, Lombardi Neto A, Totten GE, Heck SC, Fernandes FAP. Use of 'FE'-31'MN'-7.5'AL'-1.3'SI'-0.9'C' alloy for fabrication of resistive elements [Internet]. Journal of ASTM International. 2010 ; 7( 2): 1-4.[citado 2024 out. 04 ] Available from: http://65.209.24.102/DOWNLOAD/JAI102605-DL.1108-1.pdf
Artigo de periodico
Evaluating the linear normalization technique for deriving J-resistance curves (2003)
Tarpani, José Ricardo; Colafemea, Ângelo Antonio; Bose Filho, Waldek Wladimir; Spinelli, Dirceu
Source: Fatigue and Fracture of Engineering Materials and Structures. Unidade: EESC
Subjects: RUPTURA DOS MATERIAIS, MATERIAIS FERROSOS, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo et al. Evaluating the linear normalization technique for deriving J-resistance curves. Fatigue and Fracture of Engineering Materials and Structures, v. 26, n. 2, p. 97-106, 2003Tradução . . Disponível em: https://doi.org/10.1046/j.1460-2695.2003.00600.x. Acesso em: 04 out. 2024.
APA
Tarpani, J. R., Colafemea, Â. A., Bose Filho, W. W., & Spinelli, D. (2003). Evaluating the linear normalization technique for deriving J-resistance curves. Fatigue and Fracture of Engineering Materials and Structures, 26( 2), 97-106. doi:10.1046/j.1460-2695.2003.00600.x
NLM
Tarpani JR, Colafemea ÂA, Bose Filho WW, Spinelli D. Evaluating the linear normalization technique for deriving J-resistance curves [Internet]. Fatigue and Fracture of Engineering Materials and Structures. 2003 ; 26( 2): 97-106.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00600.x
Vancouver
Tarpani JR, Colafemea ÂA, Bose Filho WW, Spinelli D. Evaluating the linear normalization technique for deriving J-resistance curves [Internet]. Fatigue and Fracture of Engineering Materials and Structures. 2003 ; 26( 2): 97-106.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00600.x
Artigo de periodico
Effect of cooling conditions on plasma-carbonitrided iron surfaces (2003)
Gontijo, Leonardo Cabral; Machado, Rogério; Miola, Eduardo José; Castelleti, Luiz Carlos; Nascente, Pedro Augusto de Paula
Source: Journal of Vacuum Science and Technology. Unidade: EESC
Assunto: TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONTIJO, Leonardo Cabral et al. Effect of cooling conditions on plasma-carbonitrided iron surfaces. Journal of Vacuum Science and Technology, v. 21, n. May/Ju 2003, 2003Tradução . . Disponível em: https://doi.org/10.1116/1.1565149. Acesso em: 04 out. 2024.
APA
Gontijo, L. C., Machado, R., Miola, E. J., Castelleti, L. C., & Nascente, P. A. de P. (2003). Effect of cooling conditions on plasma-carbonitrided iron surfaces. Journal of Vacuum Science and Technology, 21( May/Ju 2003). doi:10.1116/1.1565149
NLM
Gontijo LC, Machado R, Miola EJ, Castelleti LC, Nascente PA de P. Effect of cooling conditions on plasma-carbonitrided iron surfaces [Internet]. Journal of Vacuum Science and Technology. 2003 ; 21( May/Ju 2003):[citado 2024 out. 04 ] Available from: https://doi.org/10.1116/1.1565149
Vancouver
Gontijo LC, Machado R, Miola EJ, Castelleti LC, Nascente PA de P. Effect of cooling conditions on plasma-carbonitrided iron surfaces [Internet]. Journal of Vacuum Science and Technology. 2003 ; 21( May/Ju 2003):[citado 2024 out. 04 ] Available from: https://doi.org/10.1116/1.1565149
Artigo de periodico
Micromechanics modelling of ductile fracture in tensile specimens using computational cells (2003)
Santos, F F; Ruggieri, Claudio
Source: Fatigue & Fracture of Engineering Materials & Structures. Unidades: EP, EESC
Subjects: DUCTILIDADE, MECÂNICA DA FRATURA, AÇO DE ALTA RESISTÊNCIA, TENSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, F F e RUGGIERI, Claudio. Micromechanics modelling of ductile fracture in tensile specimens using computational cells. Fatigue & Fracture of Engineering Materials & Structures, v. Fe 2003, n. 2, p. 173-181, 2003Tradução . . Disponível em: https://doi.org/10.1046/j.1460-2695.2003.00619.x. Acesso em: 04 out. 2024.
APA
Santos, F. F., & Ruggieri, C. (2003). Micromechanics modelling of ductile fracture in tensile specimens using computational cells. Fatigue & Fracture of Engineering Materials & Structures, Fe 2003( 2), 173-181. doi:10.1046/j.1460-2695.2003.00619.x
NLM
Santos FF, Ruggieri C. Micromechanics modelling of ductile fracture in tensile specimens using computational cells [Internet]. Fatigue & Fracture of Engineering Materials & Structures. 2003 ; Fe 2003( 2): 173-181.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00619.x
Vancouver
Santos FF, Ruggieri C. Micromechanics modelling of ductile fracture in tensile specimens using computational cells [Internet]. Fatigue & Fracture of Engineering Materials & Structures. 2003 ; Fe 2003( 2): 173-181.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00619.x
Artigo de periodico
On the fitting and extrapolation of J-resistance data derived through the linear normalization technique (2003)
Tarpani, José Ricardo; Bose Filho, Waldek Wladimir; Spinelli, Dirceu
Source: Fatigue & Fracture of Engineering Materials & Structures. Unidade: EESC
Subjects: TENACIDADE DOS MATERIAIS, MATERIAIS FERROSOS, RUPTURA DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo e BOSE FILHO, Waldek Wladimir e SPINELLI, Dirceu. On the fitting and extrapolation of J-resistance data derived through the linear normalization technique. Fatigue & Fracture of Engineering Materials & Structures, v. 26, n. 2, p. 107-114, 2003Tradução . . Disponível em: https://doi.org/10.1046/j.1460-2695.2003.00597.x. Acesso em: 04 out. 2024.
APA
Tarpani, J. R., Bose Filho, W. W., & Spinelli, D. (2003). On the fitting and extrapolation of J-resistance data derived through the linear normalization technique. Fatigue & Fracture of Engineering Materials & Structures, 26( 2), 107-114. doi:10.1046/j.1460-2695.2003.00597.x
NLM
Tarpani JR, Bose Filho WW, Spinelli D. On the fitting and extrapolation of J-resistance data derived through the linear normalization technique [Internet]. Fatigue & Fracture of Engineering Materials & Structures. 2003 ; 26( 2): 107-114.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00597.x
Vancouver
Tarpani JR, Bose Filho WW, Spinelli D. On the fitting and extrapolation of J-resistance data derived through the linear normalization technique [Internet]. Fatigue & Fracture of Engineering Materials & Structures. 2003 ; 26( 2): 107-114.[citado 2024 out. 04 ] Available from: https://doi.org/10.1046/j.1460-2695.2003.00597.x
Artigo de periodico
Surface characterisation of plasma-nitrid iron by X-ray photoelectron spectroscopy (1999)
Miola, Eduardo J.; Souza, Sylvio D. de; Nascente, Pedro A. P.; Olzon-Dionysio, Maristela; Olivieri, Carlos A.; Spinelli, Dirceu
Source: Applied Surface Science. Unidade: EESC
Assunto: TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIOLA, Eduardo J. et al. Surface characterisation of plasma-nitrid iron by X-ray photoelectron spectroscopy. Applied Surface Science, v. 144-145, p. 272-277, 1999Tradução . . Disponível em: https://doi.org/10.1016/s0169-4332(98)00809-5. Acesso em: 04 out. 2024.
APA
Miola, E. J., Souza, S. D. de, Nascente, P. A. P., Olzon-Dionysio, M., Olivieri, C. A., & Spinelli, D. (1999). Surface characterisation of plasma-nitrid iron by X-ray photoelectron spectroscopy. Applied Surface Science, 144-145, 272-277. doi:10.1016/s0169-4332(98)00809-5
NLM
Miola EJ, Souza SD de, Nascente PAP, Olzon-Dionysio M, Olivieri CA, Spinelli D. Surface characterisation of plasma-nitrid iron by X-ray photoelectron spectroscopy [Internet]. Applied Surface Science. 1999 ; 144-145 272-277.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/s0169-4332(98)00809-5
Vancouver
Miola EJ, Souza SD de, Nascente PAP, Olzon-Dionysio M, Olivieri CA, Spinelli D. Surface characterisation of plasma-nitrid iron by X-ray photoelectron spectroscopy [Internet]. Applied Surface Science. 1999 ; 144-145 272-277.[citado 2024 out. 04 ] Available from: https://doi.org/10.1016/s0169-4332(98)00809-5

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Subjects

Source title

Indexado em