ReP USP - Resultado da busca

Artigo de periodico
Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant (2021)
Calderon-Hernández, José Wilmar ; Alves Junior, Sandro Francisco; Moraes, Flavio Pereira de; Melo, Hercílio Gomes de ; Padilha, Angelo Fernando
Source: Materials and Corrosion. Unidade: EP
Subjects: CORROSÃO, AÇO, TECNOLOGIA PETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant. Materials and Corrosion, p. 1-12, 2021Tradução . . Disponível em: https://doi.org/10.1002/maco.202112517. Acesso em: 01 out. 2024.
APA
Calderon-Hernández, J. W., Alves Junior, S. F., Moraes, F. P. de, Melo, H. G. de, & Padilha, A. F. (2021). Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant. Materials and Corrosion, 1-12. doi:10.1002/maco.202112517
NLM
Calderon-Hernández JW, Alves Junior SF, Moraes FP de, Melo HG de, Padilha AF. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant [Internet]. Materials and Corrosion. 2021 ;1-12.[citado 2024 out. 01 ] Available from: https://doi.org/10.1002/maco.202112517
Vancouver
Calderon-Hernández JW, Alves Junior SF, Moraes FP de, Melo HG de, Padilha AF. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant [Internet]. Materials and Corrosion. 2021 ;1-12.[citado 2024 out. 01 ] Available from: https://doi.org/10.1002/maco.202112517
Artigo de periodico
Low temperature active screen plasma nitriding of 17-4 PH stainless steel (2016)
Pinedo, Carlos Eduardo ; Varela Larrota, Sharys Ivonn ; Nishikawa, Arthur Seiji ; Dong, Hanshan; Li, Xiao-Ying; Magnabosco, Rodrigo ; Tschiptschin, André Paulo
Source: Surface & Coatings Technology. Unidade: EP
Subjects: AÇO INOXIDÁVEL, MATERIAIS NANOESTRUTURADOS, MICROSCOPIA ELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINEDO, Carlos Eduardo et al. Low temperature active screen plasma nitriding of 17-4 PH stainless steel. Surface & Coatings Technology, v. 308, p. 264-272, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2016.07.096. Acesso em: 01 out. 2024.
APA
Pinedo, C. E., Varela Larrota, S. I., Nishikawa, A. S., Dong, H., Li, X. -Y., Magnabosco, R., & Tschiptschin, A. P. (2016). Low temperature active screen plasma nitriding of 17-4 PH stainless steel. Surface & Coatings Technology, 308, 264-272. doi:10.1016/j.surfcoat.2016.07.096
NLM
Pinedo CE, Varela Larrota SI, Nishikawa AS, Dong H, Li X-Y, Magnabosco R, Tschiptschin AP. Low temperature active screen plasma nitriding of 17-4 PH stainless steel [Internet]. Surface & Coatings Technology. 2016 ; 308 264-272.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2016.07.096
Vancouver
Pinedo CE, Varela Larrota SI, Nishikawa AS, Dong H, Li X-Y, Magnabosco R, Tschiptschin AP. Low temperature active screen plasma nitriding of 17-4 PH stainless steel [Internet]. Surface & Coatings Technology. 2016 ; 308 264-272.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2016.07.096
Artigo de periodico
Synthesis of Carbon Nanomaterials through Up-Cycling Agricultural and Municipal Solid Wastes (2012)
Zhuo, Chuanwei; Alves, Joner Oliveira ; Tenório, Jorge Alberto Soares ; Levendis, Yiannis Angelo
Source: Industrial & Engineering Chemistry Research. Unidade: EP
Subjects: RESÍDUOS URBANOS, CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZHUO, Chuanwei et al. Synthesis of Carbon Nanomaterials through Up-Cycling Agricultural and Municipal Solid Wastes. Industrial & Engineering Chemistry Research, v. 51, n. 7, p. 2922-2930, 2012Tradução . . Disponível em: https://doi.org/10.1021/ie202711h. Acesso em: 01 out. 2024.
APA
Zhuo, C., Alves, J. O., Tenório, J. A. S., & Levendis, Y. A. (2012). Synthesis of Carbon Nanomaterials through Up-Cycling Agricultural and Municipal Solid Wastes. Industrial & Engineering Chemistry Research, 51( 7), 2922-2930. doi:10.1021/ie202711h
NLM
Zhuo C, Alves JO, Tenório JAS, Levendis YA. Synthesis of Carbon Nanomaterials through Up-Cycling Agricultural and Municipal Solid Wastes [Internet]. Industrial & Engineering Chemistry Research. 2012 ; 51( 7): 2922-2930.[citado 2024 out. 01 ] Available from: https://doi.org/10.1021/ie202711h
Vancouver
Zhuo C, Alves JO, Tenório JAS, Levendis YA. Synthesis of Carbon Nanomaterials through Up-Cycling Agricultural and Municipal Solid Wastes [Internet]. Industrial & Engineering Chemistry Research. 2012 ; 51( 7): 2922-2930.[citado 2024 out. 01 ] Available from: https://doi.org/10.1021/ie202711h
Artigo de periodico
Nanoparticles of carbonaceous minerals in vulcanized rubber products (2012)
Martín Cortés, Guillermo Ruperto ; Ésper, Fábio José; Hennies, Wildor Theodoro; De Tomi, Giorgio Francesco Cesare ; Valenzuela Díaz, Francisco Rolando
Source: Materials Science Forum. Unidade: EP
Subjects: VULCANIZAÇÃO (PRODUTOS DERIVADOS;USO), HIDROCARBONETOS, NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTÍN CORTÉS, Guillermo Ruperto et al. Nanoparticles of carbonaceous minerals in vulcanized rubber products. Materials Science Forum, v. 727-728, p. 1746-1750, 2012Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/MSF.727-728.1746. Acesso em: 01 out. 2024.
APA
Martín Cortés, G. R., Ésper, F. J., Hennies, W. T., De Tomi, G. F. C., & Valenzuela Díaz, F. R. (2012). Nanoparticles of carbonaceous minerals in vulcanized rubber products. Materials Science Forum, 727-728, 1746-1750. doi:10.4028/www.scientific.net/MSF.727-728.1746
NLM
Martín Cortés GR, Ésper FJ, Hennies WT, De Tomi GFC, Valenzuela Díaz FR. Nanoparticles of carbonaceous minerals in vulcanized rubber products [Internet]. Materials Science Forum. 2012 ; 727-728 1746-1750.[citado 2024 out. 01 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.727-728.1746
Vancouver
Martín Cortés GR, Ésper FJ, Hennies WT, De Tomi GFC, Valenzuela Díaz FR. Nanoparticles of carbonaceous minerals in vulcanized rubber products [Internet]. Materials Science Forum. 2012 ; 727-728 1746-1750.[citado 2024 out. 01 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.727-728.1746
Artigo de periodico
Spin-glass-like behavior of uncompensated surface spins in NiO nanoparticulated powder (2012)
Herrera Aragón, Fermin Fidel ; Souza, P. E. N. de; Coaquira, José Antonio Huamaní ; Hidalgo Falla, Maria del Pilar ; Gouvêa, Douglas
Source: Physica B. Unidade: EP
Assunto: NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HERRERA ARAGÓN, Fermin Fidel et al. Spin-glass-like behavior of uncompensated surface spins in NiO nanoparticulated powder. Physica B, v. 407, n. 13, p. 2601-2605, 2012Tradução . . Disponível em: https://doi.org/10.1016/j.physb.2012.04.003. Acesso em: 01 out. 2024.
APA
Herrera Aragón, F. F., Souza, P. E. N. de, Coaquira, J. A. H., Hidalgo Falla, M. del P., & Gouvêa, D. (2012). Spin-glass-like behavior of uncompensated surface spins in NiO nanoparticulated powder. Physica B, 407( 13), 2601-2605. doi:10.1016/j.physb.2012.04.003
NLM
Herrera Aragón FF, Souza PEN de, Coaquira JAH, Hidalgo Falla M del P, Gouvêa D. Spin-glass-like behavior of uncompensated surface spins in NiO nanoparticulated powder [Internet]. Physica B. 2012 ; 407( 13): 2601-2605.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.physb.2012.04.003
Vancouver
Herrera Aragón FF, Souza PEN de, Coaquira JAH, Hidalgo Falla M del P, Gouvêa D. Spin-glass-like behavior of uncompensated surface spins in NiO nanoparticulated powder [Internet]. Physica B. 2012 ; 407( 13): 2601-2605.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.physb.2012.04.003
Artigo de periodico
Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel (2010)
Monlevade, Eduardo Franco de ; Goldenstein, Hélio ; Falleiros, Ivan Gilberto Sandoval
Source: Journal of Materials Science. Unidade: EP
Subjects: AÇO INOXIDÁVEL DUPLEX, DIAGRAMA DE TRANSFORMAÇÃO DE FASE, CRISTALOGRAFIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONLEVADE, Eduardo Franco de e GOLDENSTEIN, Hélio e FALLEIROS, Ivan Gilberto Sandoval. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel. Journal of Materials Science, v. 45, n. 18, p. 5089-5093, 2010Tradução . . Disponível em: https://doi.org/10.1007/s10853-010-4468-6. Acesso em: 01 out. 2024.
APA
Monlevade, E. F. de, Goldenstein, H., & Falleiros, I. G. S. (2010). Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel. Journal of Materials Science, 45( 18), 5089-5093. doi:10.1007/s10853-010-4468-6
NLM
Monlevade EF de, Goldenstein H, Falleiros IGS. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel [Internet]. Journal of Materials Science. 2010 ; 45( 18): 5089-5093.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10853-010-4468-6
Vancouver
Monlevade EF de, Goldenstein H, Falleiros IGS. Intergranular formation of austenite during delta ferrite decomposition in a duplex stainless steel [Internet]. Journal of Materials Science. 2010 ; 45( 18): 5089-5093.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10853-010-4468-6
Artigo de periodico
High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic (2009)
Yoshimura, Humberto Naoyuki ; Narita, Nilson Eiji; Molisani, André Luiz; Goldenstein, Hélio
Source: Journal of Materials Science. Unidade: EP
Subjects: ALTA TEMPERATURA, CERÂMICA, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
YOSHIMURA, Humberto Naoyuki et al. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic. Journal of Materials Science, v. 44, n. 21, p. 5773-5780, 2009Tradução . . Disponível em: https://doi.org/10.1007/s10853-009-3809-9. Acesso em: 01 out. 2024.
APA
Yoshimura, H. N., Narita, N. E., Molisani, A. L., & Goldenstein, H. (2009). High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic. Journal of Materials Science, 44( 21), 5773-5780. doi:10.1007/s10853-009-3809-9
NLM
Yoshimura HN, Narita NE, Molisani AL, Goldenstein H. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic [Internet]. Journal of Materials Science. 2009 ; 44( 21): 5773-5780.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10853-009-3809-9
Vancouver
Yoshimura HN, Narita NE, Molisani AL, Goldenstein H. High temperature flexural strength and fracture toughness of AlN with Y2O3 ceramic [Internet]. Journal of Materials Science. 2009 ; 44( 21): 5773-5780.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10853-009-3809-9
Artigo de periodico
Surface modification of bovine bone ash prepared by milling and acid washing process (2009)
Gouvêa, Douglas ; Vera Alatrista, Gerardo Augusto; Brito, Silvio Luiz Miranda; Castro, Ricardo Hauch Ribeiro de ; Kahn, Henrique
Source: Ceramics International. Unidade: EP
Subjects: OXIDAÇÃO, MOAGEM, PORCELANA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GOUVÊA, Douglas et al. Surface modification of bovine bone ash prepared by milling and acid washing process. Ceramics International, v. 35, n. 3043-3049, 2009Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2009.04.024. Acesso em: 01 out. 2024.
APA
Gouvêa, D., Vera Alatrista, G. A., Brito, S. L. M., Castro, R. H. R. de, & Kahn, H. (2009). Surface modification of bovine bone ash prepared by milling and acid washing process. Ceramics International, 35( 3043-3049). doi:10.1016/j.ceramint.2009.04.024
NLM
Gouvêa D, Vera Alatrista GA, Brito SLM, Castro RHR de, Kahn H. Surface modification of bovine bone ash prepared by milling and acid washing process [Internet]. Ceramics International. 2009 ;35( 3043-3049):[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.ceramint.2009.04.024
Vancouver
Gouvêa D, Vera Alatrista GA, Brito SLM, Castro RHR de, Kahn H. Surface modification of bovine bone ash prepared by milling and acid washing process [Internet]. Ceramics International. 2009 ;35( 3043-3049):[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.ceramint.2009.04.024
Artigo de periodico
Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization (2009)
Moraes, Raul Pacheco de; Valera, Ticiane Sanches ; Demarquette, Nicole Raymonde ; Oliveira, Pedro Carlos de; Silva, Maria Lucia Caetano Pinto da ; Santos, Amilton Martins dos
Source: Journal of Applied Polymer Science. Unidades: EP, EEL
Subjects: POLIMERIZAÇÃO, NANOCOMPOSITOS, ARGILAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Raul Pacheco de et al. Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization. Journal of Applied Polymer Science, v. 112, n. 4, p. 1949 - 1958, 2009Tradução . . Disponível em: https://doi.org/10.1002/app.29309. Acesso em: 01 out. 2024.
APA
Moraes, R. P. de, Valera, T. S., Demarquette, N. R., Oliveira, P. C. de, Silva, M. L. C. P. da, & Santos, A. M. dos. (2009). Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization. Journal of Applied Polymer Science, 112( 4), 1949 - 1958. doi:10.1002/app.29309
NLM
Moraes RP de, Valera TS, Demarquette NR, Oliveira PC de, Silva MLCP da, Santos AM dos. Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization [Internet]. Journal of Applied Polymer Science. 2009 ;112( 4): 1949 - 1958.[citado 2024 out. 01 ] Available from: https://doi.org/10.1002/app.29309
Vancouver
Moraes RP de, Valera TS, Demarquette NR, Oliveira PC de, Silva MLCP da, Santos AM dos. Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization [Internet]. Journal of Applied Polymer Science. 2009 ;112( 4): 1949 - 1958.[citado 2024 out. 01 ] Available from: https://doi.org/10.1002/app.29309
Artigo de periodico
Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles (2008)
Suegama, Patricia Hatsue ; Melo, Hercílio Gomes de ; Recco, Abel André Cândido ; Tschiptschin, André Paulo ; Aoki, Idalina Vieira
Source: Surface and Coatings Technology. Unidade: EP
Subjects: AÇO CARBONO, CORROSÃO DOS MATERIAIS (PREVENÇÃO E CONTROLE), ELETROQUÍMICA (TÉCNICAS), INIBIDORES DE CORROSÃO, PROTEÇÃO DOS MATERIAIS, TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SUEGAMA, Patricia Hatsue et al. Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles. Surface and Coatings Technology, v. 202, n. 13, p. 2850-2858, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2007.10.028. Acesso em: 01 out. 2024.
APA
Suegama, P. H., Melo, H. G. de, Recco, A. A. C., Tschiptschin, A. P., & Aoki, I. V. (2008). Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles. Surface and Coatings Technology, 202( 13), 2850-2858. doi:10.1016/j.surfcoat.2007.10.028
NLM
Suegama PH, Melo HG de, Recco AAC, Tschiptschin AP, Aoki IV. Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles [Internet]. Surface and Coatings Technology. 2008 ; 202( 13): 2850-2858.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.10.028
Vancouver
Suegama PH, Melo HG de, Recco AAC, Tschiptschin AP, Aoki IV. Corrosion behavior of carbon steel protected with single and bi-layer of silane films filled with silica nanoparticles [Internet]. Surface and Coatings Technology. 2008 ; 202( 13): 2850-2858.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.10.028
Artigo de periodico
Magnetic loss,permeability dispersion, and role of eddy currents in Mn–Zn sintered ferrites (2008)
Beatrice, C; Fiorillo, F.; Landgraf, Fernando José Gomes ; Lazaro-Colan, V.; Janasi, Suzilene Real; Leicht, Jeanete
Source: Journal of Magnetism and Magnetic Materials. Unidade: EP
Subjects: MATERIAIS, POLARIZAÇÃO, PROPRIEDADES DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEATRICE, C et al. Magnetic loss,permeability dispersion, and role of eddy currents in Mn–Zn sintered ferrites. Journal of Magnetism and Magnetic Materials, v. 320, p. e865-868, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.jmmm.2008.04.121. Acesso em: 01 out. 2024.
APA
Beatrice, C., Fiorillo, F., Landgraf, F. J. G., Lazaro-Colan, V., Janasi, S. R., & Leicht, J. (2008). Magnetic loss,permeability dispersion, and role of eddy currents in Mn–Zn sintered ferrites. Journal of Magnetism and Magnetic Materials, 320, e865-868. doi:10.1016/j.jmmm.2008.04.121
NLM
Beatrice C, Fiorillo F, Landgraf FJG, Lazaro-Colan V, Janasi SR, Leicht J. Magnetic loss,permeability dispersion, and role of eddy currents in Mn–Zn sintered ferrites [Internet]. Journal of Magnetism and Magnetic Materials. 2008 ;320 e865-868.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.jmmm.2008.04.121
Vancouver
Beatrice C, Fiorillo F, Landgraf FJG, Lazaro-Colan V, Janasi SR, Leicht J. Magnetic loss,permeability dispersion, and role of eddy currents in Mn–Zn sintered ferrites [Internet]. Journal of Magnetism and Magnetic Materials. 2008 ;320 e865-868.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.jmmm.2008.04.121
Artigo de periodico
Instrumented indentation testing of an epoxy adhesive used in automobile body assembling (2008)
Santos, Alessandra Fernandes; Wiebeck, Hélio ; Souza, Roberto Martins de ; Schön, Cláudio Geraldo
Source: Polymer Testing. Unidade: EP
Subjects: INDÚSTRIA AUTOMOBILÍSTICA, RESINAS EPOXI
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Alessandra Fernandes et al. Instrumented indentation testing of an epoxy adhesive used in automobile body assembling. Polymer Testing, v. 27, n. 5, p. 632-637, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.polymertesting.2008.04.002. Acesso em: 01 out. 2024.
APA
Santos, A. F., Wiebeck, H., Souza, R. M. de, & Schön, C. G. (2008). Instrumented indentation testing of an epoxy adhesive used in automobile body assembling. Polymer Testing, 27( 5), 632-637. doi:10.1016/j.polymertesting.2008.04.002
NLM
Santos AF, Wiebeck H, Souza RM de, Schön CG. Instrumented indentation testing of an epoxy adhesive used in automobile body assembling [Internet]. Polymer Testing. 2008 ; 27( 5): 632-637.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.polymertesting.2008.04.002
Vancouver
Santos AF, Wiebeck H, Souza RM de, Schön CG. Instrumented indentation testing of an epoxy adhesive used in automobile body assembling [Internet]. Polymer Testing. 2008 ; 27( 5): 632-637.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.polymertesting.2008.04.002
Artigo de periodico
Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steel (2007)
Recco, Abel André Cândido ; Oliveira, I C; Massi, Marcos; Maciel, Homero Santiago; Tschiptschin, André Paulo
Source: Surface & Coatings Technology. Unidade: EP
Subjects: TRATAMENTO DE SUPERFÍCIES, PLASMA, MATERIAIS (PROPRIEDADES MECÂNICAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RECCO, Abel André Cândido et al. Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steel. Surface & Coatings Technology, v. 202, n. 4-7, p. 1078-1083, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2007.07.073. Acesso em: 01 out. 2024.
APA
Recco, A. A. C., Oliveira, I. C., Massi, M., Maciel, H. S., & Tschiptschin, A. P. (2007). Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steel. Surface & Coatings Technology, 202( 4-7), 1078-1083. doi:10.1016/j.surfcoat.2007.07.073
NLM
Recco AAC, Oliveira IC, Massi M, Maciel HS, Tschiptschin AP. Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steel [Internet]. Surface & Coatings Technology. 2007 ; 202( 4-7): 1078-1083.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.07.073
Vancouver
Recco AAC, Oliveira IC, Massi M, Maciel HS, Tschiptschin AP. Adhesion of reactive magnetron sputtered TINx and TICy coatings to AISI H13 tool steel [Internet]. Surface & Coatings Technology. 2007 ; 202( 4-7): 1078-1083.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.07.073
Artigo de periodico
Finite element analysis of peak stresses developed during indentation of ceramic coated steels (2007)
Pachler, Thiago; Souza, Roberto Martins de ; Tschiptschin, André Paulo
Source: Surface & Coatings Technology. Unidade: EP
Subjects: AÇO DE ALTA RESISTÊNCIA, FILMES FINOS, DEFORMAÇÃO E ESTRESSES, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PACHLER, Thiago e SOUZA, Roberto Martins de e TSCHIPTSCHIN, André Paulo. Finite element analysis of peak stresses developed during indentation of ceramic coated steels. Surface & Coatings Technology, v. 202, n. 2, p. 1098-1102, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2007.07.041. Acesso em: 01 out. 2024.
APA
Pachler, T., Souza, R. M. de, & Tschiptschin, A. P. (2007). Finite element analysis of peak stresses developed during indentation of ceramic coated steels. Surface & Coatings Technology, 202( 2), 1098-1102. doi:10.1016/j.surfcoat.2007.07.041
NLM
Pachler T, Souza RM de, Tschiptschin AP. Finite element analysis of peak stresses developed during indentation of ceramic coated steels [Internet]. Surface & Coatings Technology. 2007 ; 202( 2): 1098-1102.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.07.041
Vancouver
Pachler T, Souza RM de, Tschiptschin AP. Finite element analysis of peak stresses developed during indentation of ceramic coated steels [Internet]. Surface & Coatings Technology. 2007 ; 202( 2): 1098-1102.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.07.041
Artigo de periodico
Argilas especiais: argilas quimicamente modificadas - uma revisão (2007)
Vieira Coelho, A. C. ; Santos, Pérsio de Souza
Source: Química Nova. Unidade: EP
Assunto: ARGILAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIEIRA COELHO, A. C. e SANTOS, Pérsio de Souza. Argilas especiais: argilas quimicamente modificadas - uma revisão. Química Nova, v. 30, n. 5, p. 1282-1294, 2007Tradução . . Disponível em: https://www.scielo.br/j/qn/a/t9JhsmH4b9Gbzs85GZtzntH/?format=pdf&lang=pt. Acesso em: 01 out. 2024.
APA
Vieira Coelho, A. C., & Santos, P. de S. (2007). Argilas especiais: argilas quimicamente modificadas - uma revisão. Química Nova, 30( 5), 1282-1294. Recuperado de https://www.scielo.br/j/qn/a/t9JhsmH4b9Gbzs85GZtzntH/?format=pdf&lang=pt
NLM
Vieira Coelho AC, Santos P de S. Argilas especiais: argilas quimicamente modificadas - uma revisão [Internet]. Química Nova. 2007 ; 30( 5): 1282-1294.[citado 2024 out. 01 ] Available from: https://www.scielo.br/j/qn/a/t9JhsmH4b9Gbzs85GZtzntH/?format=pdf&lang=pt
Vancouver
Vieira Coelho AC, Santos P de S. Argilas especiais: argilas quimicamente modificadas - uma revisão [Internet]. Química Nova. 2007 ; 30( 5): 1282-1294.[citado 2024 out. 01 ] Available from: https://www.scielo.br/j/qn/a/t9JhsmH4b9Gbzs85GZtzntH/?format=pdf&lang=pt
Artigo de periodico
Trace elements and heating value from sewage sludge, Barueri, São Paulo, Brasil (2006)
Morais, Leandro Cardoso de; Dweck, Jo; Valenzuela Díaz, Francisco Rolando ; Gonçalves, E. M.; Büchler, Pedro Maurício
Source: International Journal of Environmental Studies. Unidade: EP
Subjects: COMBUSTÍVEIS (PRODUÇÃO), EFLUENTES (TRATAMENTO TÉRMICO), FONTES ALTERNATIVAS DE ENERGIA, IMPACTOS AMBIENTAIS (PREVENÇÃO E CONTROLE), MATERIAIS CERÂMICOS (PRODUÇÃO), RESÍDUOS SÓLIDOS (REÚSO), RESÍDUOS SÓLIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Leandro Cardoso de et al. Trace elements and heating value from sewage sludge, Barueri, São Paulo, Brasil. International Journal of Environmental Studies, v. 63, n. Ju, p. 331-336, 2006Tradução . . Disponível em: https://doi.org/10.1080/00207230600579704. Acesso em: 01 out. 2024.
APA
Morais, L. C. de, Dweck, J., Valenzuela Díaz, F. R., Gonçalves, E. M., & Büchler, P. M. (2006). Trace elements and heating value from sewage sludge, Barueri, São Paulo, Brasil. International Journal of Environmental Studies, 63( Ju), 331-336. doi:10.1080/00207230600579704
NLM
Morais LC de, Dweck J, Valenzuela Díaz FR, Gonçalves EM, Büchler PM. Trace elements and heating value from sewage sludge, Barueri, São Paulo, Brasil [Internet]. International Journal of Environmental Studies. 2006 ;63( Ju): 331-336.[citado 2024 out. 01 ] Available from: https://doi.org/10.1080/00207230600579704
Vancouver
Morais LC de, Dweck J, Valenzuela Díaz FR, Gonçalves EM, Büchler PM. Trace elements and heating value from sewage sludge, Barueri, São Paulo, Brasil [Internet]. International Journal of Environmental Studies. 2006 ;63( Ju): 331-336.[citado 2024 out. 01 ] Available from: https://doi.org/10.1080/00207230600579704
Artigo de periodico
Contribution to a technological characterization of kaolins from Cuba and Brazil (2006)
Martín Cortés, Guillermo Ruperto ; Hennies, Wildor Theodoro; Valenzuela Díaz, Francisco Rolando
Source: Materials Science Forum. Unidade: EP
Subjects: CARACTERIZAÇÃO TECNOLÓGICA DE MINÉRIOS, CAULIM, CAULIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTÍN CORTÉS, Guillermo Ruperto e HENNIES, Wildor Theodoro e VALENZUELA DÍAZ, Francisco Rolando. Contribution to a technological characterization of kaolins from Cuba and Brazil. Materials Science Forum, v. 530-531, p. 720-727, 2006Tradução . . Disponível em: https://doi.org/10.4028/0-87849-423-5.720. Acesso em: 01 out. 2024.
APA
Martín Cortés, G. R., Hennies, W. T., & Valenzuela Díaz, F. R. (2006). Contribution to a technological characterization of kaolins from Cuba and Brazil. Materials Science Forum, 530-531, 720-727. doi:10.4028/0-87849-423-5.720
NLM
Martín Cortés GR, Hennies WT, Valenzuela Díaz FR. Contribution to a technological characterization of kaolins from Cuba and Brazil [Internet]. Materials Science Forum. 2006 ; 530-531 720-727.[citado 2024 out. 01 ] Available from: https://doi.org/10.4028/0-87849-423-5.720
Vancouver
Martín Cortés GR, Hennies WT, Valenzuela Díaz FR. Contribution to a technological characterization of kaolins from Cuba and Brazil [Internet]. Materials Science Forum. 2006 ; 530-531 720-727.[citado 2024 out. 01 ] Available from: https://doi.org/10.4028/0-87849-423-5.720
Artigo de periodico
Synthesis and characterization of chloro and bromo substituted p-phenylene vinylene homopolymers and alternating copolymers (2006)
Péres, Laura Oliveira; Fernandes, Mauro Roberto; Garcia, Jarem Raul; Wang, Shu Hui ; Nart, Francisco Carlos
Source: Synthetic Metals. Unidades: EP, IQSC
Assunto: ELETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PÉRES, Laura Oliveira et al. Synthesis and characterization of chloro and bromo substituted p-phenylene vinylene homopolymers and alternating copolymers. Synthetic Metals, v. 156, n. 7-8, p. 529-536, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.synthmet.2006.01.014. Acesso em: 01 out. 2024.
APA
Péres, L. O., Fernandes, M. R., Garcia, J. R., Wang, S. H., & Nart, F. C. (2006). Synthesis and characterization of chloro and bromo substituted p-phenylene vinylene homopolymers and alternating copolymers. Synthetic Metals, 156( 7-8), 529-536. doi:10.1016/j.synthmet.2006.01.014
NLM
Péres LO, Fernandes MR, Garcia JR, Wang SH, Nart FC. Synthesis and characterization of chloro and bromo substituted p-phenylene vinylene homopolymers and alternating copolymers [Internet]. Synthetic Metals. 2006 ; 156( 7-8): 529-536.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.synthmet.2006.01.014
Vancouver
Péres LO, Fernandes MR, Garcia JR, Wang SH, Nart FC. Synthesis and characterization of chloro and bromo substituted p-phenylene vinylene homopolymers and alternating copolymers [Internet]. Synthetic Metals. 2006 ; 156( 7-8): 529-536.[citado 2024 out. 01 ] Available from: https://doi.org/10.1016/j.synthmet.2006.01.014
Artigo de periodico
Dimension stone cutting with AWJ methods (2005)
Martín Cortés, Guillermo Ruperto ; Hennies, Wildor Theodoro; Lauand, Carlos Tadeu; Valenzuela Díaz, Francisco Rolando
Source: Materials Science Forum. Unidade: EP
Subjects: CORTE A FRIO, ROCHAS ORNAMENTAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTÍN CORTÉS, Guillermo Ruperto et al. Dimension stone cutting with AWJ methods. Materials Science Forum, v. No 2005, p. 482-487, 2005Tradução . . Disponível em: http://www.scientific.net/web/public.aspx?module=DefaultModule&Action=ShowTitlebySeriesAction&issn=0255-5476&ShowRightCtl=SeriesInfo&Kurzel=MSF&ReiheID=5. Acesso em: 01 out. 2024.
APA
Martín Cortés, G. R., Hennies, W. T., Lauand, C. T., & Valenzuela Díaz, F. R. (2005). Dimension stone cutting with AWJ methods. Materials Science Forum, No 2005, 482-487. Recuperado de http://www.scientific.net/web/public.aspx?module=DefaultModule&Action=ShowTitlebySeriesAction&issn=0255-5476&ShowRightCtl=SeriesInfo&Kurzel=MSF&ReiheID=5
NLM
Martín Cortés GR, Hennies WT, Lauand CT, Valenzuela Díaz FR. Dimension stone cutting with AWJ methods [Internet]. Materials Science Forum. 2005 ; No 2005 482-487.[citado 2024 out. 01 ] Available from: http://www.scientific.net/web/public.aspx?module=DefaultModule&Action=ShowTitlebySeriesAction&issn=0255-5476&ShowRightCtl=SeriesInfo&Kurzel=MSF&ReiheID=5
Vancouver
Martín Cortés GR, Hennies WT, Lauand CT, Valenzuela Díaz FR. Dimension stone cutting with AWJ methods [Internet]. Materials Science Forum. 2005 ; No 2005 482-487.[citado 2024 out. 01 ] Available from: http://www.scientific.net/web/public.aspx?module=DefaultModule&Action=ShowTitlebySeriesAction&issn=0255-5476&ShowRightCtl=SeriesInfo&Kurzel=MSF&ReiheID=5
Artigo de periodico
Characterization of lactose and derived products in dairy product industry effluents processing (2005)
Morais, Leandro Cardoso de; Dweck, Jo; Valenzuela Díaz, Francisco Rolando ; Büchler, Pedro Maurício
Source: Journal of Thermal Analysis and Calorimetry,. Unidade: EP
Subjects: ADSORÇÃO, ANÁLISE TÉRMICA, ARGILAS, EFLUENTES (TRATAMENTO BIOLÓGICO), LATICÍNIOS, POLUIÇÃO (PREVENÇÃO E CONTROLE)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Leandro Cardoso de et al. Characterization of lactose and derived products in dairy product industry effluents processing. Journal of Thermal Analysis and Calorimetry, v. no 2005, n. 2, p. 315-318, 2005Tradução . . Disponível em: https://doi.org/10.1007/s10973-005-0896-y. Acesso em: 01 out. 2024.
APA
Morais, L. C. de, Dweck, J., Valenzuela Díaz, F. R., & Büchler, P. M. (2005). Characterization of lactose and derived products in dairy product industry effluents processing. Journal of Thermal Analysis and Calorimetry,, no 2005( 2), 315-318. doi:10.1007/s10973-005-0896-y
NLM
Morais LC de, Dweck J, Valenzuela Díaz FR, Büchler PM. Characterization of lactose and derived products in dairy product industry effluents processing [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 2): 315-318.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10973-005-0896-y
Vancouver
Morais LC de, Dweck J, Valenzuela Díaz FR, Büchler PM. Characterization of lactose and derived products in dairy product industry effluents processing [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 2): 315-318.[citado 2024 out. 01 ] Available from: https://doi.org/10.1007/s10973-005-0896-y

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Countries/Territories

Indexado em

Normalized affiliation

Non normalized affiliation