ReP USP - Resultado da busca

Artigo de periodico
Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating (2023)
Pereira, Natália Fernanda Santos; Reis, Barbara Cristina Mendanha; Santos, Anderson Júnior dos ; Houmard, Manuel ; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: FILMES FINOS, REVESTIMENTOS, TRIBOLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, p. 1-17, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-11072-2. Acesso em: 02 jun. 2023.
APA
Pereira, N. F. S., Reis, B. C. M., Santos, A. J. dos, Houmard, M., Câmara, M. A., Rodrigues, A. R., & Rubio, J. C. C. (2023). Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-023-11072-2
NLM
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-023-11072-2
Vancouver
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-023-11072-2
Artigo de periodico
Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique (2022)
Talon, Anthony Gaspar; Sato, Bruno Kenta; Rodrigues, Matheus de Souza; Ávila, Benício Nacif; Cuesta, Jorge Luiz; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MOAGEM, PROCESSOS DE FABRICAÇÃO, CERÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, v. 123, p. 2771-2782, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-10385-y. Acesso em: 02 jun. 2023.
APA
Talon, A. G., Sato, B. K., Rodrigues, M. de S., Ávila, B. N., Cuesta, J. L., Ribeiro, F. S. F., et al. (2022). Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, 123, 2771-2782. doi:10.1007/s00170-022-10385-y
NLM
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10385-y
Vancouver
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10385-y
Artigo de periodico
ZrO2-CNT composite production through reducing atmosphere (2022)
Gerlin Neto, Vicente ; Pereira, Cristian Guilherme Barbosa; Faglioni, Felipe Dias; Fortulan, Carlos Alberto ; Foschini, Cesar Renato
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ZIRCÔNIA, MATERIAIS COMPÓSITOS, TENACIDADE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GERLIN NETO, Vicente et al. ZrO2-CNT composite production through reducing atmosphere. International Journal of Advanced Manufacturing Technology, v. 122, p. 3323-3335, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-10127-0. Acesso em: 02 jun. 2023.
APA
Gerlin Neto, V., Pereira, C. G. B., Faglioni, F. D., Fortulan, C. A., & Foschini, C. R. (2022). ZrO2-CNT composite production through reducing atmosphere. International Journal of Advanced Manufacturing Technology, 122, 3323-3335. doi:10.1007/s00170-022-10127-0
NLM
Gerlin Neto V, Pereira CGB, Faglioni FD, Fortulan CA, Foschini CR. ZrO2-CNT composite production through reducing atmosphere [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 122 3323-3335.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10127-0
Vancouver
Gerlin Neto V, Pereira CGB, Faglioni FD, Fortulan CA, Foschini CR. ZrO2-CNT composite production through reducing atmosphere [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 122 3323-3335.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10127-0
Artigo de periodico
A novel framework for single‑minute exchange of die (SMED) assisted by lean tools (2022)
Pattaro Junior, Roberto Giani; Inácio, Ricardo Henrique; Silva, Iris Bento da; Hassui, Amauri; Barbosa, Gustavo Franco
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: CUSTO INDUSTRIAL, ESTUDO DE CASO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PATTARO JUNIOR, Roberto Giani et al. A novel framework for single‑minute exchange of die (SMED) assisted by lean tools. International Journal of Advanced Manufacturing Technology, p. 1-19, 2022Tradução . . Disponível em: https://link.springer.com/article/10.1007/s00170-021-08534-w. Acesso em: 02 jun. 2023.
APA
Pattaro Junior, R. G., Inácio, R. H., Silva, I. B. da, Hassui, A., & Barbosa, G. F. (2022). A novel framework for single‑minute exchange of die (SMED) assisted by lean tools. International Journal of Advanced Manufacturing Technology, 1-19. doi:10.1007/s00170-021-08534-w
NLM
Pattaro Junior RG, Inácio RH, Silva IB da, Hassui A, Barbosa GF. A novel framework for single‑minute exchange of die (SMED) assisted by lean tools [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-19.[citado 2023 jun. 02 ] Available from: https://link.springer.com/article/10.1007/s00170-021-08534-w
Vancouver
Pattaro Junior RG, Inácio RH, Silva IB da, Hassui A, Barbosa GF. A novel framework for single‑minute exchange of die (SMED) assisted by lean tools [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-19.[citado 2023 jun. 02 ] Available from: https://link.springer.com/article/10.1007/s00170-021-08534-w
Artigo de periodico
Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM) (2022)
Barragan De Los Rios, German Alberto; Ferreira, Rodrigo; Mariani, Fábio Edson; Silva, Eraldo Jannone da ; Coelho, Reginaldo Teixeira
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: RUGOSIDADE SUPERFICIAL, FRESAGEM, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARRAGAN DE LOS RIOS, German Alberto et al. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM). International Journal of Advanced Manufacturing Technology, p. 1-15, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-09179-z. Acesso em: 02 jun. 2023.
APA
Barragan De Los Rios, G. A., Ferreira, R., Mariani, F. E., Silva, E. J. da, & Coelho, R. T. (2022). Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM). International Journal of Advanced Manufacturing Technology, 1-15. doi:10.1007/s00170-022-09179-z
NLM
Barragan De Los Rios GA, Ferreira R, Mariani FE, Silva EJ da, Coelho RT. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM) [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-15.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-09179-z
Vancouver
Barragan De Los Rios GA, Ferreira R, Mariani FE, Silva EJ da, Coelho RT. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM) [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-15.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-09179-z
Artigo de periodico
Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process (2022)
Domingues, Bruno Biondo; Rodriguez, Rafael Lemes; Souza, Guilherme Guerra de; Ávila, Benício Nacif; Rodrigues, Matheus de Souza; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: RETIFICAÇÃO, ENGENHARIA MECÂNICA, CERÂMICA AVANÇADA, MEIO AMBIENTE, EFEITO ESTUFA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DOMINGUES, Bruno Biondo et al. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process. International Journal of Advanced Manufacturing Technology, p. 1-13, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-10598-1. Acesso em: 02 jun. 2023.
APA
Domingues, B. B., Rodriguez, R. L., Souza, G. G. de, Ávila, B. N., Rodrigues, M. de S., Ribeiro, F. S. F., et al. (2022). Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process. International Journal of Advanced Manufacturing Technology, 1-13. doi:10.1007/s00170-022-10598-1
NLM
Domingues BB, Rodriguez RL, Souza GG de, Ávila BN, Rodrigues M de S, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-13.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10598-1
Vancouver
Domingues BB, Rodriguez RL, Souza GG de, Ávila BN, Rodrigues M de S, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-13.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-10598-1
Artigo de periodico
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing (2022)
Davis, Rahul; Singh, Abhishek; Jackson, Mark James; Coelho, Reginaldo Teixeira ; Prakash, Divya; Charalambous, Charalambos Panayiotou; Ahmed, Waqar; Silva, Leonardo Rosa Ribeiro; Lawrence, Abner Ankit
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DAVIS, Rahul et al. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. International Journal of Advanced Manufacturing Technology, v. 120, p. 1473-1530, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-08770-8. Acesso em: 02 jun. 2023.
APA
Davis, R., Singh, A., Jackson, M. J., Coelho, R. T., Prakash, D., Charalambous, C. P., et al. (2022). A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. International Journal of Advanced Manufacturing Technology, 120, 1473-1530. doi:10.1007/s00170-022-08770-8
NLM
Davis R, Singh A, Jackson MJ, Coelho RT, Prakash D, Charalambous CP, Ahmed W, Silva LRR, Lawrence AA. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 120 1473-1530.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-08770-8
Vancouver
Davis R, Singh A, Jackson MJ, Coelho RT, Prakash D, Charalambous CP, Ahmed W, Silva LRR, Lawrence AA. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 120 1473-1530.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-08770-8
Artigo de periodico
The dynamics of a 3D printed microrotor (2022)
Pinhata, Gustavo Marcelo; Nicoletti, Rodrigo
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MANUFATURA ADITIVA, ROTOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINHATA, Gustavo Marcelo e NICOLETTI, Rodrigo. The dynamics of a 3D printed microrotor. International Journal of Advanced Manufacturing Technology, v. 121, p. 2803-2814, 2022Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-022-09454-z. Acesso em: 02 jun. 2023.
APA
Pinhata, G. M., & Nicoletti, R. (2022). The dynamics of a 3D printed microrotor. International Journal of Advanced Manufacturing Technology, 121, 2803-2814. doi:10.1007/s00170-022-09454-z
NLM
Pinhata GM, Nicoletti R. The dynamics of a 3D printed microrotor [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 121 2803-2814.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-09454-z
Vancouver
Pinhata GM, Nicoletti R. The dynamics of a 3D printed microrotor [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 121 2803-2814.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-022-09454-z
Artigo de periodico
Hot embossing of aspherical Fresnel microlenses: design, process, and characterization (2021)
Colafemina, João Paulo; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ENGENHARIA MECÂNICA, TORNEAMENTO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLAFEMINA, João Paulo e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, p. 1-19, 2021Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-021-06637-y. Acesso em: 02 jun. 2023.
APA
Colafemina, J. P., Dib, M. H. M., & Jasinevicius, R. G. (2021). Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, 1-19. doi:10.1007/s00170-021-06637-y
NLM
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-06637-y
Vancouver
Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-06637-y
Artigo de periodico
Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation (2021)
Silva, Tatiany Mafra; Diniz, Anselmo Eduardo
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ENGENHARIA DE PRODUÇÃO, TORNEAMENTO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Tatiany Mafra e DINIZ, Anselmo Eduardo. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. International Journal of Advanced Manufacturing Technology, v. 113, p. 1431-1447, 2021Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-021-06710-6. Acesso em: 02 jun. 2023.
APA
Silva, T. M., & Diniz, A. E. (2021). Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation. International Journal of Advanced Manufacturing Technology, 113, 1431-1447. doi:10.1007/s00170-021-06710-6
NLM
Silva TM, Diniz AE. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 113 1431-1447.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-06710-6
Vancouver
Silva TM, Diniz AE. Experimental evaluation of the minimum uncut chip thickness (MUCT) in AISI H13 steel, using the end milling operation [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 113 1431-1447.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-06710-6
Artigo de periodico
Screw-assisted 3D printing with granulated materials: a systematic review (2021)
Justino Netto, Joaquim Manoel; Idogava, Henrique Takashi; Santos, Luiz Eduardo Frezzatto; Silveira, Zilda de Castro; Romio, Pedro; Alves, Jorge Lino
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MANUFATURA, EXTRUSÃO, TERCEIRA DIMENSÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JUSTINO NETTO, Joaquim Manoel et al. Screw-assisted 3D printing with granulated materials: a systematic review. International Journal of Advanced Manufacturing Technology, p. 1-17, 2021Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-021-07365-z. Acesso em: 02 jun. 2023.
APA
Justino Netto, J. M., Idogava, H. T., Santos, L. E. F., Silveira, Z. de C., Romio, P., & Alves, J. L. (2021). Screw-assisted 3D printing with granulated materials: a systematic review. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-021-07365-z
NLM
Justino Netto JM, Idogava HT, Santos LEF, Silveira Z de C, Romio P, Alves JL. Screw-assisted 3D printing with granulated materials: a systematic review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-17.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-07365-z
Vancouver
Justino Netto JM, Idogava HT, Santos LEF, Silveira Z de C, Romio P, Alves JL. Screw-assisted 3D printing with granulated materials: a systematic review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-17.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-07365-z
Artigo de periodico
Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review (2021)
Silva, Iris Bento da; Cabeça, Marcio Gonçalves; Barbosa, Gustavo Franco; Shiki, Sidney Bruce
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INDÚSTRIA 4.0, SUSTENTABILIDADE, REVISÃO SISTEMÁTICA, QUALIDADE DO PRODUTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Iris Bento da et al. Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review. International Journal of Advanced Manufacturing Technology, p. 1-27, 2021Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-021-08336-0. Acesso em: 02 jun. 2023.
APA
Silva, I. B. da, Cabeça, M. G., Barbosa, G. F., & Shiki, S. B. (2021). Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review. International Journal of Advanced Manufacturing Technology, 1-27. doi:10.1007/s00170-021-08336-0
NLM
Silva IB da, Cabeça MG, Barbosa GF, Shiki SB. Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-27.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-08336-0
Vancouver
Silva IB da, Cabeça MG, Barbosa GF, Shiki SB. Lean Six Sigma for the automotive industry through the tools and aspects within metrics: a literature review [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-27.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-021-08336-0
Artigo de periodico
Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials (2020)
Ribeiro, Kandice Suane Barros; Venter, Giuliana Sardi; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: FRESAGEM, ACÚSTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros e VENTER, Giuliana Sardi e RODRIGUES, Alessandro Roger. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials. International Journal of Advanced Manufacturing Technology, v. 109, p. 2173-2187, 2020Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-020-05711-1. Acesso em: 02 jun. 2023.
APA
Ribeiro, K. S. B., Venter, G. S., & Rodrigues, A. R. (2020). Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials. International Journal of Advanced Manufacturing Technology, 109, 2173-2187. doi:10.1007/s00170-020-05711-1
NLM
Ribeiro KSB, Venter GS, Rodrigues AR. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 2173-2187.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05711-1
Vancouver
Ribeiro KSB, Venter GS, Rodrigues AR. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 2173-2187.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05711-1
Artigo de periodico
Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes (2020)
D'Ávila, José Luiz; Inforçatti Neto, Paulo; Noritomi, Pedro Yoshito; Coelho, Reginaldo Teixeira ; Silva, Jorge Vicente Lopes da
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INDÚSTRIA 4.0, MANUFATURA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
D'ÁVILA, José Luiz et al. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, v. 110, p. 3377-3390, 2020Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-020-06062-7. Acesso em: 02 jun. 2023.
APA
D'Ávila, J. L., Inforçatti Neto, P., Noritomi, P. Y., Coelho, R. T., & Silva, J. V. L. da. (2020). Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes. International Journal of Advanced Manufacturing Technology, 110, 3377-3390. doi:10.1007/s00170-020-06062-7
NLM
D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-06062-7
Vancouver
D'Ávila JL, Inforçatti Neto P, Noritomi PY, Coelho RT, Silva JVL da. Hybrid manufacturing: a review of the synergy between directed energy deposition and subtractive processes [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 110 3377-3390.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-06062-7
Artigo de periodico
CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling (2020)
Kasemodel, Rodrigo Berretta; Souza, Adriano Fagali de; Voigt, Rodrigo; Basso, Igor Fernando; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: CAD/CAM, FRESAGEM, PROCESSOS DE FABRICAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KASEMODEL, Rodrigo Berretta et al. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling. International Journal of Advanced Manufacturing Technology, v. 107, p. 1883-1900, 2020Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-020-05143-x. Acesso em: 02 jun. 2023.
APA
Kasemodel, R. B., Souza, A. F. de, Voigt, R., Basso, I. F., & Rodrigues, A. R. (2020). CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling. International Journal of Advanced Manufacturing Technology, 107, 1883-1900. doi:10.1007/s00170-020-05143-x
NLM
Kasemodel RB, Souza AF de, Voigt R, Basso IF, Rodrigues AR. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 107 1883-1900.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05143-x
Vancouver
Kasemodel RB, Souza AF de, Voigt R, Basso IF, Rodrigues AR. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 107 1883-1900.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05143-x
Artigo de periodico
Grinding process applied to workpieces with different geometries interrupted using CBN wheel (2020)
Rodriguez, Rafael Lemes; Lopes, José Claudio; Garcia, Mateus Vinicius; Tarrento, Gilson Eduardo; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INTEGRIDADE ESTRUTURAL, RETIFICAÇÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUEZ, Rafael Lemes et al. Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, n. 107, p. 1265-1275, 2020Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-020-05122-2. Acesso em: 02 jun. 2023.
APA
Rodriguez, R. L., Lopes, J. C., Garcia, M. V., Tarrento, G. E., Rodrigues, A. R., Sanchez, L. E. de A., et al. (2020). Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, ( 107), 1265-1275. doi:dx.doi.org/10.1007/s00170-020-05122-2
NLM
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05122-2
Vancouver
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05122-2
Artigo de periodico
An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations (2020)
Assis, Cleiton Lazaro Fazolo de; Mecelis, Guilherme Rosati; Coelho, Reginaldo Teixeira
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assunto: ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de e MECELIS, Guilherme Rosati e COELHO, Reginaldo Teixeira. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations. International Journal of Advanced Manufacturing Technology, v. 109, p. 1867-1880, 2020Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-020-05710-2. Acesso em: 02 jun. 2023.
APA
Assis, C. L. F. de, Mecelis, G. R., & Coelho, R. T. (2020). An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations. International Journal of Advanced Manufacturing Technology, 109, 1867-1880. doi:10.1007/s00170-020-05710-2
NLM
Assis CLF de, Mecelis GR, Coelho RT. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 1867-1880.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05710-2
Vancouver
Assis CLF de, Mecelis GR, Coelho RT. An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 1867-1880.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-020-05710-2
Artigo de periodico
Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill (2019)
Pereira, Natália Fernanda Santos; Rubio, Juan Carlos Campos; Santos, Anderson Júnior dos; Moumard, Manuel; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: PERFURAÇÃO, PROCESSO SOL-GEL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill. International Journal of Advanced Manufacturing Technology, v. No 2019, p. 1-13, 2019Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-019-04429-z. Acesso em: 02 jun. 2023.
APA
Pereira, N. F. S., Rubio, J. C. C., Santos, A. J. dos, Moumard, M., Câmara, M. A., & Rodrigues, A. R. (2019). Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill. International Journal of Advanced Manufacturing Technology, No 2019, 1-13. doi:10.1007/s00170-019-04429-z
NLM
Pereira NFS, Rubio JCC, Santos AJ dos, Moumard M, Câmara MA, Rodrigues AR. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; No 2019 1-13.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04429-z
Vancouver
Pereira NFS, Rubio JCC, Santos AJ dos, Moumard M, Câmara MA, Rodrigues AR. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; No 2019 1-13.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04429-z
Artigo de periodico
Analysis of the tool nose radius influence in the machining of a green ceramic material (2019)
Gonçalves Júnior, Marcos; Sanchez, Luiz Eduardo de Angelo; França, Thiago Valle; Fortulan, Carlos Alberto ; Silva, Rodrigo Henriques Lopes da; Foschini, Cesar Renato
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: ACABAMENTO DE SUPERFÍCIES, CERÂMICA, USINAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONÇALVES JÚNIOR, Marcos et al. Analysis of the tool nose radius influence in the machining of a green ceramic material. International Journal of Advanced Manufacturing Technology, v. 105, p. 3117-3125, 2019Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-019-04430-6. Acesso em: 02 jun. 2023.
APA
Gonçalves Júnior, M., Sanchez, L. E. de A., França, T. V., Fortulan, C. A., Silva, R. H. L. da, & Foschini, C. R. (2019). Analysis of the tool nose radius influence in the machining of a green ceramic material. International Journal of Advanced Manufacturing Technology, 105, 3117-3125. doi:10.1007/s00170-019-04430-6
NLM
Gonçalves Júnior M, Sanchez LE de A, França TV, Fortulan CA, Silva RHL da, Foschini CR. Analysis of the tool nose radius influence in the machining of a green ceramic material [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; 105 3117-3125.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04430-6
Vancouver
Gonçalves Júnior M, Sanchez LE de A, França TV, Fortulan CA, Silva RHL da, Foschini CR. Analysis of the tool nose radius influence in the machining of a green ceramic material [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; 105 3117-3125.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04430-6
Artigo de periodico
Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors (2019)
Talon, Anthony Gaspar; Lopes, José Claudio; Tavares, André Bueno; Sato, Bruno Kenta; Rodrigues, Alessandro Roger ; Genovez, Mário Celso; Pinto, Tiago Alexandre Dinis; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos; Mello, Hamilton José de
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INIBIDORES DE CORROSÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, n. ju 2019, p. 1437-1448, 2019Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-019-04005-5. Acesso em: 02 jun. 2023.
APA
Talon, A. G., Lopes, J. C., Tavares, A. B., Sato, B. K., Rodrigues, A. R., Genovez, M. C., et al. (2019). Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, ( ju 2019), 1437-1448. doi:dx.doi.org/10.1007/s00170-019-04005-5
NLM
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Aguiar PR, Bianchi EC, Mello HJ de. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04005-5
Vancouver
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Aguiar PR, Bianchi EC, Mello HJ de. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2023 jun. 02 ] Available from: http://dx.doi.org/10.1007/s00170-019-04005-5

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration