ReP USP - Resultado da busca

Artigo de periodico
Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines (2022)
Castilho, Bruno Cesar Noronha Marques de; Rodrigues, Alisson Mendes ; Avila, Pedro Renato Tavares; Apolinário, Raíra Chefer; Nossa, Tamires de Souza; Walczak, Magdalena; Fernandes, Julielle Veras; Menezes, Romualdo Rodrigues; Neves, Gelmires de Araújo ; Pinto, Haroldo Cavalcanti
Source: Scientific Reports. Unidade: EESC
Subjects: MOTORES DE COMBUSTÃO INTERNA, CERÂMICA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTILHO, Bruno Cesar Noronha Marques de; RODRIGUES, Alisson Mendes; AVILA, Pedro Renato Tavares; et al. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines. Scientific Reports, London, United Kingdom : Nature, 2022, v. 12, p. 1-17, 2022. Disponível em: < http://dx.doi.org/10.1038/s41598-022-06131-9 > DOI: 10.1038/s41598-022-06131-9.
APA
Castilho, B. C. N. M. de, Rodrigues, A. M., Avila, P. R. T., Apolinário, R. C., Nossa, T. de S., Walczak, M., et al. (2022). Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines. Scientific Reports, 12, 1-17. doi:10.1038/s41598-022-06131-9
NLM
Castilho BCNM de, Rodrigues AM, Avila PRT, Apolinário RC, Nossa T de S, Walczak M, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines [Internet]. Scientific Reports. 2022 ; 12 1-17.Available from: http://dx.doi.org/10.1038/s41598-022-06131-9
Vancouver
Castilho BCNM de, Rodrigues AM, Avila PRT, Apolinário RC, Nossa T de S, Walczak M, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. Hybrid magnetron sputtering of ceramic superlattices for application in a next generation of combustion engines [Internet]. Scientific Reports. 2022 ; 12 1-17.Available from: http://dx.doi.org/10.1038/s41598-022-06131-9
Artigo de periodico
Production and assessment of the biodegradation and ecotoxicity of xylanand starch-based bioplastics (2022)
Abe, Mateus Manabu; Branciforti, Márcia Cristina ; Montagnolli, Renato Nallin; Morales, Maria Aparecida Marin; Jacobus, Ana Paula; Brienzo, Michel
Source: Chemosphere. Unidade: EESC
Subjects: BIOMASSA, BIOMATERIAIS, BIODEGRADAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ABE, Mateus Manabu; BRANCIFORTI, Márcia Cristina; MONTAGNOLLI, Renato Nallin; et al. Production and assessment of the biodegradation and ecotoxicity of xylanand starch-based bioplastics. Chemosphere, Cambridge, United Kingdom, Elsevier, v. 287, p. 1-10, 2022. Disponível em: < http://dx.doi.org/10.1016/j.chemosphere.2021.132290 > DOI: 10.1016/j.chemosphere.2021.132290.
APA
Abe, M. M., Branciforti, M. C., Montagnolli, R. N., Morales, M. A. M., Jacobus, A. P., & Brienzo, M. (2022). Production and assessment of the biodegradation and ecotoxicity of xylanand starch-based bioplastics. Chemosphere, 287, 1-10. doi:10.1016/j.chemosphere.2021.132290
NLM
Abe MM, Branciforti MC, Montagnolli RN, Morales MAM, Jacobus AP, Brienzo M. Production and assessment of the biodegradation and ecotoxicity of xylanand starch-based bioplastics [Internet]. Chemosphere. 2022 ; 287 1-10.Available from: http://dx.doi.org/10.1016/j.chemosphere.2021.132290
Vancouver
Abe MM, Branciforti MC, Montagnolli RN, Morales MAM, Jacobus AP, Brienzo M. Production and assessment of the biodegradation and ecotoxicity of xylanand starch-based bioplastics [Internet]. Chemosphere. 2022 ; 287 1-10.Available from: http://dx.doi.org/10.1016/j.chemosphere.2021.132290
Artigo de periodico
New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy (2022)
Callegari, Bruna ; Oliveira, joão Pedro; Coelho, Rodrigo Santiago; Brito, Pedro Paiva; Schell, Norbert; Soldera, Flavio; Mücklich, Frank; Pinto, Haroldo Cavalcanti
Source: Materials Chemistry and Physics. Unidade: EESC
Subjects: TITÂNIO, CRISTALIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALLEGARI, Bruna; OLIVEIRA, joão Pedro; COELHO, Rodrigo Santiago; et al. New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy. Materials Chemistry and Physics, Lausanne, Switzerland, Elsevier, v. 276, p. 1-14, 2022. Disponível em: < http://dx.doi.org/10.1016/j.matchemphys.2021.125388 > DOI: 10.1016/j.matchemphys.2021.125388.
APA
Callegari, B., Oliveira, joão P., Coelho, R. S., Brito, P. P., Schell, N., Soldera, F., et al. (2022). New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy. Materials Chemistry and Physics, 276, 1-14. doi:10.1016/j.matchemphys.2021.125388
NLM
Callegari B, Oliveira joão P, Coelho RS, Brito PP, Schell N, Soldera F, Mücklich F, Pinto HC. New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy [Internet]. Materials Chemistry and Physics. 2022 ; 276 1-14.Available from: http://dx.doi.org/10.1016/j.matchemphys.2021.125388
Vancouver
Callegari B, Oliveira joão P, Coelho RS, Brito PP, Schell N, Soldera F, Mücklich F, Pinto HC. New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy [Internet]. Materials Chemistry and Physics. 2022 ; 276 1-14.Available from: http://dx.doi.org/10.1016/j.matchemphys.2021.125388
Curadoria
Symposium M: XIII BRAZGLASS - Brazilian Symposium on Glass and Related Materials (2022)
de Camargo, Andrea Simone Stucchi (cur) ; Rodrigues, Ana Candida Martins (cur); Nalin, Marcelo (cur); Manzani, Danilo (cur) ; Ferreira, Eduardo Bellini (cur)
Unidades: IFSC, IQSC, EESC
Subjects: VIDRO CERÂMICO, VIDRO, PESQUISA CIENTÍFICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DE CAMARGO, Andrea Simone Stucchi; RODRIGUES, Ana Candida Martins; NALIN, Marcelo; MANZANI, Danilo; FERREIRA, Eduardo Bellini. Symposium M: XIII BRAZGLASS - Brazilian Symposium on Glass and Related Materials. [S.l: s.n.], 2022.
APA
de Camargo, A. S. S., Rodrigues, A. C. M., Nalin, M., Manzani, D., & Ferreira, E. B. (2022). Symposium M: XIII BRAZGLASS - Brazilian Symposium on Glass and Related Materials. Rio de Janeiro: Sociedade Brasileira de Pesquisa em Materiais - SBPMat.
NLM
de Camargo ASS, Rodrigues ACM, Nalin M, Manzani D, Ferreira EB. Symposium M: XIII BRAZGLASS - Brazilian Symposium on Glass and Related Materials. 2022 ;
Vancouver
de Camargo ASS, Rodrigues ACM, Nalin M, Manzani D, Ferreira EB. Symposium M: XIII BRAZGLASS - Brazilian Symposium on Glass and Related Materials. 2022 ;
Artigo de periodico
Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface (2022)
Candido, Lucas Miguel; Ferreira, Eduardo Bellini ; Pinelli, Lígia Antunes Pereira
Source: Journal of Adhesive Dentistry. Unidade: EESC
Subjects: ZIRCÔNIA, PRÓTESE DENTÁRIA, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANDIDO, Lucas Miguel; FERREIRA, Eduardo Bellini; PINELLI, Lígia Antunes Pereira. Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface. Journal of Adhesive Dentistry, New Malden, United Lingdon, Quintessence Publishing, v. 24, n. 1, p. 39-48, 2022. Disponível em: < http://dx.doi.org/10.3290/j.jad.b2701695 > DOI: 10.3290/j.jad.b2701695.
APA
Candido, L. M., Ferreira, E. B., & Pinelli, L. A. P. (2022). Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface. Journal of Adhesive Dentistry, 24( 1), 39-48. doi:10.3290/j.jad.b2701695
NLM
Candido LM, Ferreira EB, Pinelli LAP. Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface [Internet]. Journal of Adhesive Dentistry. 2022 ; 24( 1): 39-48.Available from: http://dx.doi.org/10.3290/j.jad.b2701695
Vancouver
Candido LM, Ferreira EB, Pinelli LAP. Effect of grinding and regenerative heat treatment on the fracture resistance of a zirconia/porcelain veneer interface [Internet]. Journal of Adhesive Dentistry. 2022 ; 24( 1): 39-48.Available from: http://dx.doi.org/10.3290/j.jad.b2701695
Artigo de periodico
Cellulose nanofibers production using a set of recombinant enzymes (2021)
Rossi, Bruno Roberto ; Pellegrini, Vanessa de Oliveira Arnoldi ; Cortez, Anelyse Abreu; Chiromito, Emanoele Maria Santos; Carvalho, Antonio Jose Felix ; Pinto, Lidiane O.; Rezende, Camila A.; Mastelaro, Valmor Roberto ; Polikarpov, Igor
Source: Carbohydrate Polymers. Unidades: EESC, IFSC, IQSC
Subjects: CELULOSE, BAGAÇOS, CANA-DE-AÇÚCAR, MATERIAIS NANOESTRUTURADOS, ENZIMAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROSSI, Bruno Roberto; PELLEGRINI, Vanessa de Oliveira Arnoldi; CORTEZ, Anelyse Abreu; et al. Cellulose nanofibers production using a set of recombinant enzymes. Carbohydrate Polymers, Oxford, v. 256, p. 117510-1-117510-9, 2021. Disponível em: < https://doi.org/10.1016/j.carbpol.2020.117510 > DOI: 10.1016/j.carbpol.2020.117510.
APA
Rossi, B. R., Pellegrini, V. de O. A., Cortez, A. A., Chiromito, E. M. S., Carvalho, A. J. F., Pinto, L. O., et al. (2021). Cellulose nanofibers production using a set of recombinant enzymes. Carbohydrate Polymers, 256, 117510-1-117510-9. doi:10.1016/j.carbpol.2020.117510
NLM
Rossi BR, Pellegrini V de OA, Cortez AA, Chiromito EMS, Carvalho AJF, Pinto LO, Rezende CA, Mastelaro VR, Polikarpov I. Cellulose nanofibers production using a set of recombinant enzymes [Internet]. Carbohydrate Polymers. 2021 ; 256 117510-1-117510-9.Available from: https://doi.org/10.1016/j.carbpol.2020.117510
Vancouver
Rossi BR, Pellegrini V de OA, Cortez AA, Chiromito EMS, Carvalho AJF, Pinto LO, Rezende CA, Mastelaro VR, Polikarpov I. Cellulose nanofibers production using a set of recombinant enzymes [Internet]. Carbohydrate Polymers. 2021 ; 256 117510-1-117510-9.Available from: https://doi.org/10.1016/j.carbpol.2020.117510
Trabalho de evento
Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures (2021)
Malafaia, Artur Mariano de Sousa; Maestro, Carolina Aurélia Ribeiro; Oliveira, Marcelo Falcão de
Source: International Journal of Metalcasting. Unidade: EESC
Subjects: RESISTÊNCIA A TRAÇÃO, ESTRUTURAS METÁLICAS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MALAFAIA, Artur Mariano de Sousa; MAESTRO, Carolina Aurélia Ribeiro; OLIVEIRA, Marcelo Falcão de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures. Anais.. Schaumburg, IL, USA: American Foundry Society, 2021.Disponível em: DOI: 10.1007/s40962-021-00679-4.
APA
Malafaia, A. M. de S., Maestro, C. A. R., & Oliveira, M. F. de. (2021). Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures. In International Journal of Metalcasting (p. 1-11). Schaumburg, IL, USA: American Foundry Society. doi:10.1007/s40962-021-00679-4
NLM
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures [Internet]. International Journal of Metalcasting. 2021 ; 1-11.Available from: http://dx.doi.org/10.1007/s40962-021-00679-4
Vancouver
Malafaia AM de S, Maestro CAR, Oliveira MF de. Alternative air induction melt–remelt processing of an Fe3Al–C intermetallic alloy: part I—mechanical properties and the effects of loading rate, heat treatment and test temperatures [Internet]. International Journal of Metalcasting. 2021 ; 1-11.Available from: http://dx.doi.org/10.1007/s40962-021-00679-4
Artigo de periodico
Advantages and disadvantages of bioplastics production from starch and lignocellulosic components (2021)
Abe, Mateus Manabu; Martins, Julia Ribeiro; Sanvezzo, Paula Bertolino; Macedo, João Vitor; Branciforti, Márcia Cristina ; Halley, Peter; Botaro, Vagner Roberto; Brienzo, Michel
Source: Polymers. Unidade: EESC
Subjects: PLÁSTICOS BIODEGRADÁVEIS, BIOMASSA, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ABE, Mateus Manabu; MARTINS, Julia Ribeiro; SANVEZZO, Paula Bertolino; et al. Advantages and disadvantages of bioplastics production from starch and lignocellulosic components. Polymers, Basel, Switzerland, MDPI AG, v. 13, n. 15, p. 1-25, 2021. Disponível em: < http://dx.doi.org/10.3390/polym13152484 > DOI: 10.3390/polym13152484.
APA
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., et al. (2021). Advantages and disadvantages of bioplastics production from starch and lignocellulosic components. Polymers, 13( 15), 1-25. doi:10.3390/polym13152484
NLM
Abe MM, Martins JR, Sanvezzo PB, Macedo JV, Branciforti MC, Halley P, Botaro VR, Brienzo M. Advantages and disadvantages of bioplastics production from starch and lignocellulosic components [Internet]. Polymers. 2021 ; 13( 15): 1-25.Available from: http://dx.doi.org/10.3390/polym13152484
Vancouver
Abe MM, Martins JR, Sanvezzo PB, Macedo JV, Branciforti MC, Halley P, Botaro VR, Brienzo M. Advantages and disadvantages of bioplastics production from starch and lignocellulosic components [Internet]. Polymers. 2021 ; 13( 15): 1-25.Available from: http://dx.doi.org/10.3390/polym13152484
Artigo de periodico
Influence of NbC content on the wear resistance of alumina/niobium carbide tools (2021)
Arantes, Vera Lúcia; Genova, L. M.; Guimarães, P. H. B. P.; Fortulan, Carlos Alberto ; Vleugels, J.
Source: Materials Research. Unidade: EESC
Subjects: DESGASTE DOS MATERIAIS, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARANTES, Vera Lúcia; GENOVA, L. M.; GUIMARÃES, P. H. B. P.; FORTULAN, Carlos Alberto; VLEUGELS, J. Influence of NbC content on the wear resistance of alumina/niobium carbide tools. Materials Research, São Carlos, SP, UFSCar, v. 24, n. 4, p. 1-8, 2021. Disponível em: < http://dx.doi.org/10.1590/1980-5373-MR-2020-0552 > DOI: 10.1590/1980-5373-MR-2020-0552.
APA
Arantes, V. L., Genova, L. M., Guimarães, P. H. B. P., Fortulan, C. A., & Vleugels, J. (2021). Influence of NbC content on the wear resistance of alumina/niobium carbide tools. Materials Research, 24( 4), 1-8. doi:10.1590/1980-5373-MR-2020-0552
NLM
Arantes VL, Genova LM, Guimarães PHBP, Fortulan CA, Vleugels J. Influence of NbC content on the wear resistance of alumina/niobium carbide tools [Internet]. Materials Research. 2021 ; 24( 4): 1-8.Available from: http://dx.doi.org/10.1590/1980-5373-MR-2020-0552
Vancouver
Arantes VL, Genova LM, Guimarães PHBP, Fortulan CA, Vleugels J. Influence of NbC content on the wear resistance of alumina/niobium carbide tools [Internet]. Materials Research. 2021 ; 24( 4): 1-8.Available from: http://dx.doi.org/10.1590/1980-5373-MR-2020-0552
Artigo de periodico
Large-area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer (2021)
Santos, Francisco Vieira dos ; Yoshioka, Sergio Akinobu ; Branciforti, Márcia Cristina
Source: Journal of Applied Polymer Science. Unidades: EESC, IQSC
Subjects: BIOENGENHARIA, BIOMATERIAIS, QUEIMADURAS, FILMES FINOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Francisco Vieira dos; YOSHIOKA, Sergio Akinobu; BRANCIFORTI, Márcia Cristina. Large-area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer. Journal of Applied Polymer Science, Hoboken, 2021. Disponível em: < https://doi.org/10.1002/app.50759 > DOI: 10.1002/app.50759.
APA
Santos, F. V. dos, Yoshioka, S. A., & Branciforti, M. C. (2021). Large-area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer. Journal of Applied Polymer Science. doi:10.1002/app.50759
NLM
Santos FV dos, Yoshioka SA, Branciforti MC. Large-area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer [Internet]. Journal of Applied Polymer Science. 2021 ;Available from: https://doi.org/10.1002/app.50759
Vancouver
Santos FV dos, Yoshioka SA, Branciforti MC. Large-area thin films of silk fibroin prepared by two methods with formic acid as solvent and glycerol as plasticizer [Internet]. Journal of Applied Polymer Science. 2021 ;Available from: https://doi.org/10.1002/app.50759
Trabalho de evento
Investigation on the existence of physical-chemical interaction between epoxy matrix and fibrillated cellulose in nano/microcomposites (2021)
Tarpani, Alessandra Cristina Soares Pozzi; Maciel, Maísa Milanez Ávila; Tarpani, José Ricardo ; Tita, Volnei
Source: Proceedings of BCCM 5. Conference title: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: CELULOSE, NANOCOMPOSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, Alessandra Cristina Soares Pozzi; MACIEL, Maísa Milanez Ávila; TARPANI, José Ricardo; TITA, Volnei. Investigation on the existence of physical-chemical interaction between epoxy matrix and fibrillated cellulose in nano/microcomposites. Anais.. São Carlos, SP: EESC/USP, 2021.
APA
Tarpani, A. C. S. P., Maciel, M. M. Á., Tarpani, J. R., & Tita, V. (2021). Investigation on the existence of physical-chemical interaction between epoxy matrix and fibrillated cellulose in nano/microcomposites. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP.
NLM
Tarpani ACSP, Maciel MMÁ, Tarpani JR, Tita V. Investigation on the existence of physical-chemical interaction between epoxy matrix and fibrillated cellulose in nano/microcomposites. Proceedings of BCCM 5. 2021 ;
Vancouver
Tarpani ACSP, Maciel MMÁ, Tarpani JR, Tita V. Investigation on the existence of physical-chemical interaction between epoxy matrix and fibrillated cellulose in nano/microcomposites. Proceedings of BCCM 5. 2021 ;
Trabalho de evento
A comparative study of 3D stitched composites and composite laminate: part I: flexural properties (2021)
Reis, Lucas Moura Montenegro; Arantes, Vera Lúcia; Morelli, Arnaldo Carlos
Source: Proceedings of BCCM 5. Conference title: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: LAMINADOS, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Lucas Moura Montenegro; ARANTES, Vera Lúcia; MORELLI, Arnaldo Carlos. A comparative study of 3D stitched composites and composite laminate: part I: flexural properties. Anais.. São Carlos, SP: EESC/USP, 2021.
APA
Reis, L. M. M., Arantes, V. L., & Morelli, A. C. (2021). A comparative study of 3D stitched composites and composite laminate: part I: flexural properties. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP.
NLM
Reis LMM, Arantes VL, Morelli AC. A comparative study of 3D stitched composites and composite laminate: part I: flexural properties. Proceedings of BCCM 5. 2021 ;
Vancouver
Reis LMM, Arantes VL, Morelli AC. A comparative study of 3D stitched composites and composite laminate: part I: flexural properties. Proceedings of BCCM 5. 2021 ;
Artigo de periodico
Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process (2021)
Moreto, J. A.; Santos, M. S. dos; Ferreira, M. O. A.; Carvalho, G. S.; Gelamo, R. V.; Aoki, Idalina Vieira ; Taryba, M.; Bose Filho, Waldek Wladimir ; Fernandes, J. C. S.
Source: Corrosion Science. Unidades: EESC, EP
Subjects: METAIS, FADIGA DOS MATERIAIS, CORROSÃO DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORETO, J. A.; SANTOS, M. S. dos; FERREIRA, M. O. A.; et al. Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process. Corrosion Science, Kidlington, Oxford, v. 182, p. 1-15, 2021. Disponível em: < http://dx.doi.org/10.1016/j.corsci.2021.109253 > DOI: 10.1016/j.corsci.2021.109253.
APA
Moreto, J. A., Santos, M. S. dos, Ferreira, M. O. A., Carvalho, G. S., Gelamo, R. V., Aoki, I. V., et al. (2021). Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process. Corrosion Science, 182, 1-15. doi:10.1016/j.corsci.2021.109253
NLM
Moreto JA, Santos MS dos, Ferreira MOA, Carvalho GS, Gelamo RV, Aoki IV, Taryba M, Bose Filho WW, Fernandes JCS. Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process [Internet]. Corrosion Science. 2021 ; 182 1-15.Available from: http://dx.doi.org/10.1016/j.corsci.2021.109253
Vancouver
Moreto JA, Santos MS dos, Ferreira MOA, Carvalho GS, Gelamo RV, Aoki IV, Taryba M, Bose Filho WW, Fernandes JCS. Corrosion and corrosion-fatigue synergism on the base metal and nugget zone of the 2524-T3 Al alloy joined by FSW process [Internet]. Corrosion Science. 2021 ; 182 1-15.Available from: http://dx.doi.org/10.1016/j.corsci.2021.109253
Artigo de periodico
On improving wear resistance of Cr-Al-N coatings using dynamic glancing angle DC magnetron sputtering (2021)
Avila, Pedro Renato Tavares; Apolinário, Raíra Chefer; Rodrigues, Alisson Mendes ; Fernandes, Jucielle Veras; Menezes, Romualdo Rodrigues; Neves, Gelmires de Araújo ; Pinto, Haroldo Cavalcanti
Source: Nanomaterials. Unidade: EESC
Subjects: NEBULOSIDADE, DIREÇÃO VEICULAR, VISÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AVILA, Pedro Renato Tavares; APOLINÁRIO, Raíra Chefer; RODRIGUES, Alisson Mendes; et al. On improving wear resistance of Cr-Al-N coatings using dynamic glancing angle DC magnetron sputtering. Nanomaterials, Basel, Switzerland, MDPI, v. 11, p. 1-14, 2021. Disponível em: < http://dx.doi.org/10.3390/nano11092187 > DOI: 10.3390/nano11092187.
APA
Avila, P. R. T., Apolinário, R. C., Rodrigues, A. M., Fernandes, J. V., Menezes, R. R., Neves, G. de A., & Pinto, H. C. (2021). On improving wear resistance of Cr-Al-N coatings using dynamic glancing angle DC magnetron sputtering. Nanomaterials, 11, 1-14. doi:10.3390/nano11092187
NLM
Avila PRT, Apolinário RC, Rodrigues AM, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. On improving wear resistance of Cr-Al-N coatings using dynamic glancing angle DC magnetron sputtering [Internet]. Nanomaterials. 2021 ; 11 1-14.Available from: http://dx.doi.org/10.3390/nano11092187
Vancouver
Avila PRT, Apolinário RC, Rodrigues AM, Fernandes JV, Menezes RR, Neves G de A, Pinto HC. On improving wear resistance of Cr-Al-N coatings using dynamic glancing angle DC magnetron sputtering [Internet]. Nanomaterials. 2021 ; 11 1-14.Available from: http://dx.doi.org/10.3390/nano11092187
Trabalho de evento
Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the composite laminate PPS-C (2021)
Toti, Francisco de Assis; Garcia, Jorge David Aveiga; Tarpani, Alessandra Cristina Soares Pozzi; Tarpani, José Ricardo
Source: Proceedings of BCCM 5. Conference title: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: TENSÃO DOS MATERIAIS, LAMINADOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOTI, Francisco de Assis; GARCIA, Jorge David Aveiga; TARPANI, Alessandra Cristina Soares Pozzi; TARPANI, José Ricardo. Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the composite laminate PPS-C. Anais.. São Carlos, SP: EESC/USP, 2021.
APA
Toti, F. de A., Garcia, J. D. A., Tarpani, A. C. S. P., & Tarpani, J. R. (2021). Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the composite laminate PPS-C. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP.
NLM
Toti F de A, Garcia JDA, Tarpani ACSP, Tarpani JR. Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the composite laminate PPS-C. Proceedings of BCCM 5. 2021 ;
Vancouver
Toti F de A, Garcia JDA, Tarpani ACSP, Tarpani JR. Comparative analysis of the damage volume and the relationship with the mechanical energy of the drilling process under dry conditions and with cryogenic cooling in the composite laminate PPS-C. Proceedings of BCCM 5. 2021 ;
Trabalho de evento
Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites (2021)
Goyo-Brito, Francisco Javier; Tarpani, José Ricardo
Source: Proceedings of BCCM 5. Conference title: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subject: MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GOYO-BRITO, Francisco Javier; TARPANI, José Ricardo. Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites. Anais.. São Carlos, SP: EESC/USP, 2021.
APA
Goyo-Brito, F. J., & Tarpani, J. R. (2021). Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP.
NLM
Goyo-Brito FJ, Tarpani JR. Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites. Proceedings of BCCM 5. 2021 ;
Vancouver
Goyo-Brito FJ, Tarpani JR. Vacuum assisted cellulose infusion: a technique for nano-reinforcements deposition for multiscale composites. Proceedings of BCCM 5. 2021 ;
Artigo de periodico
In situ investigations on stress and microstructure evolution in polycrystalline Ti(C,N)/α-Al2O3 CVD coatings under thermal cycling loads (2021)
García, José; Moreno, Maiara Fernanda; Wei, Wan; Apel, Daniel; Pinto, Haroldo Cavalcanti ; Meixner, Matthias; Klaus, Manuela; Genzel, Christoph
Source: Crystals. Unidade: EESC
Subjects: MATERIAIS, DIFRAÇÃO POR RAIOS X, TENSÃO RESIDUAL, REVESTIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GARCÍA, José; MORENO, Maiara Fernanda; WEI, Wan; et al. In situ investigations on stress and microstructure evolution in polycrystalline Ti(C,N)/α-Al2O3 CVD coatings under thermal cycling loads. Crystals, Basel, Switzerland, MDPI, v. 11, p. 1-18, 2021. Disponível em: < https://dx.doi.org/10.3390/cryst11020158 > DOI: 10.3390/cryst11020158.
APA
García, J., Moreno, M. F., Wei, W., Apel, D., Pinto, H. C., Meixner, M., et al. (2021). In situ investigations on stress and microstructure evolution in polycrystalline Ti(C,N)/α-Al2O3 CVD coatings under thermal cycling loads. Crystals, 11, 1-18. doi:10.3390/cryst11020158
NLM
García J, Moreno MF, Wei W, Apel D, Pinto HC, Meixner M, Klaus M, Genzel C. In situ investigations on stress and microstructure evolution in polycrystalline Ti(C,N)/α-Al2O3 CVD coatings under thermal cycling loads [Internet]. Crystals. 2021 ; 11 1-18.Available from: https://dx.doi.org/10.3390/cryst11020158
Vancouver
García J, Moreno MF, Wei W, Apel D, Pinto HC, Meixner M, Klaus M, Genzel C. In situ investigations on stress and microstructure evolution in polycrystalline Ti(C,N)/α-Al2O3 CVD coatings under thermal cycling loads [Internet]. Crystals. 2021 ; 11 1-18.Available from: https://dx.doi.org/10.3390/cryst11020158
Artigo de periodico
Detection and imaging of damages and defects in fibre-reinforced composites by magnetic resonance technique (2021)
Alves, Carine Lourenço; Oliveira, Janete Schultz; Tannus, Alberto ; Tarpani, Alessandra Cristina Soares Pozzi; Tarpani, José Ricardo
Source: Materials. Unidades: IFSC, EESC
Subjects: RESSONÂNCIA MAGNÉTICA, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Carine Lourenço; OLIVEIRA, Janete Schultz; TANNUS, Alberto; TARPANI, Alessandra Cristina Soares Pozzi; TARPANI, José Ricardo. Detection and imaging of damages and defects in fibre-reinforced composites by magnetic resonance technique. Materials, Basel, v. Fe 2021, n. 4, p. 977-1-977-22, 2021. Disponível em: < https://dx.doi.org/10.3390/ma14040977 > DOI: 10.3390/ma14040977.
APA
Alves, C. L., Oliveira, J. S., Tannus, A., Tarpani, A. C. S. P., & Tarpani, J. R. (2021). Detection and imaging of damages and defects in fibre-reinforced composites by magnetic resonance technique. Materials, Fe 2021( 4), 977-1-977-22. doi:10.3390/ma14040977
NLM
Alves CL, Oliveira JS, Tannus A, Tarpani ACSP, Tarpani JR. Detection and imaging of damages and defects in fibre-reinforced composites by magnetic resonance technique [Internet]. Materials. 2021 ; Fe 2021( 4): 977-1-977-22.Available from: https://dx.doi.org/10.3390/ma14040977
Vancouver
Alves CL, Oliveira JS, Tannus A, Tarpani ACSP, Tarpani JR. Detection and imaging of damages and defects in fibre-reinforced composites by magnetic resonance technique [Internet]. Materials. 2021 ; Fe 2021( 4): 977-1-977-22.Available from: https://dx.doi.org/10.3390/ma14040977
Artigo de periodico
TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept (2021)
Rios, Mariana Alves; Barbugli, Paula Aboud; Iemma, Monica Rosas Costa; Grande, Rafael; Carvalho, Antonio Jose Felix ; Trovatti, Eliane
Source: Journal of Materials Science. Unidade: EESC
Subjects: MEDICINA REGENERATIVA, BIOMATERIAIS, BIOPOLÍMEROS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIOS, Mariana Alves; BARBUGLI, Paula Aboud; IEMMA, Monica Rosas Costa; et al. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept. Journal of Materials Science, New York, NY, USA, Springer, v. 56, p. 16661-16670, 2021. Disponível em: < https://dx.doi.org/10.1007/s10853-021-06373-4 > DOI: 10.1007/s10853-021-06373-4.
APA
Rios, M. A., Barbugli, P. A., Iemma, M. R. C., Grande, R., Carvalho, A. J. F., & Trovatti, E. (2021). TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept. Journal of Materials Science, 56, 16661-16670. doi:10.1007/s10853-021-06373-4
NLM
Rios MA, Barbugli PA, Iemma MRC, Grande R, Carvalho AJF, Trovatti E. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept [Internet]. Journal of Materials Science. 2021 ; 56 16661-16670.Available from: https://dx.doi.org/10.1007/s10853-021-06373-4
Vancouver
Rios MA, Barbugli PA, Iemma MRC, Grande R, Carvalho AJF, Trovatti E. TEMPO-oxidized cellulose poly-ionic drawn fiber, a cell support system proof of concept [Internet]. Journal of Materials Science. 2021 ; 56 16661-16670.Available from: https://dx.doi.org/10.1007/s10853-021-06373-4
Artigo de periodico
Surface properties of a new lithium disilicate glass-ceramic after grinding (2021)
Miotto, Larissa Natiele ; Villas-Boas, Mariana de Oliveira Carlos; Zanotto, Edgar Dutra; Ferreira, Eduardo Bellini ; Fais, Laiza Maria Grassi; Pinelli, Lígia Antunes Pereira
Source: Journal of Materials Science: materials in medicine. Unidade: EESC
Subjects: RETIFICAÇÃO, VIDRO CERÂMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIOTTO, Larissa Natiele; VILLAS-BOAS, Mariana de Oliveira Carlos; ZANOTTO, Edgar Dutra; et al. Surface properties of a new lithium disilicate glass-ceramic after grinding. Journal of Materials Science: materials in medicine, New York, NY, USA, Springer, v. 32, p. 1-9, 2021. Disponível em: < http://dx.doi.org/10.1007/s10856-021-06592-w > DOI: 10.1007/s10856-021-06592-w.
APA
Miotto, L. N., Villas-Boas, M. de O. C., Zanotto, E. D., Ferreira, E. B., Fais, L. M. G., & Pinelli, L. A. P. (2021). Surface properties of a new lithium disilicate glass-ceramic after grinding. Journal of Materials Science: materials in medicine, 32, 1-9. doi:10.1007/s10856-021-06592-w
NLM
Miotto LN, Villas-Boas M de OC, Zanotto ED, Ferreira EB, Fais LMG, Pinelli LAP. Surface properties of a new lithium disilicate glass-ceramic after grinding [Internet]. Journal of Materials Science: materials in medicine. 2021 ; 32 1-9.Available from: http://dx.doi.org/10.1007/s10856-021-06592-w
Vancouver
Miotto LN, Villas-Boas M de OC, Zanotto ED, Ferreira EB, Fais LMG, Pinelli LAP. Surface properties of a new lithium disilicate glass-ceramic after grinding [Internet]. Journal of Materials Science: materials in medicine. 2021 ; 32 1-9.Available from: http://dx.doi.org/10.1007/s10856-021-06592-w

USP Schools

ReP

Filters

Document types

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference title

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration

Keywords