Filtros : "EESC" "Coelho, Reginaldo Teixeira" Limpar

Filtros



Refine with date range


  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOMENI, Seyedali et al. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 6241-6242, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15452-8. Acesso em: 12 jun. 2025.
    • APA

      Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 6241-6242. doi:10.1007/s00170-025-15452-8
    • NLM

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8
    • Vancouver

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOMENI, Seyedali et al. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 2491-2517, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15308-1. Acesso em: 12 jun. 2025.
    • APA

      Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 2491-2517. doi:10.1007/s00170-025-15308-1
    • NLM

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1
    • Vancouver

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: USINAGEM, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de et al. Enhancing surface quality in micro end-milling of ultrafne-grained low carbon steel micromolds through strategic toolpath selection. International Journal of Advanced Manufacturing Technology, v. 137, p. 3077-3093, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15312-5. Acesso em: 12 jun. 2025.
    • APA

      Assis, C. L. F. de, Mecelis, G. R., Coelho, R. T., & Rodrigues, A. R. (2025). Enhancing surface quality in micro end-milling of ultrafne-grained low carbon steel micromolds through strategic toolpath selection. International Journal of Advanced Manufacturing Technology, 137, 3077-3093. doi:10.1007/s00170-025-15312-5
    • NLM

      Assis CLF de, Mecelis GR, Coelho RT, Rodrigues AR. Enhancing surface quality in micro end-milling of ultrafne-grained low carbon steel micromolds through strategic toolpath selection [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 3077-3093.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15312-5
    • Vancouver

      Assis CLF de, Mecelis GR, Coelho RT, Rodrigues AR. Enhancing surface quality in micro end-milling of ultrafne-grained low carbon steel micromolds through strategic toolpath selection [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 3077-3093.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-025-15312-5
  • Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, EP

    Subjects: MANUFATURA ADITIVA, LASER, CALOR, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BON, Douglas Geovanni et al. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, v. 130, n. 9-10, p. 4919-4931, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-024-12967-4. Acesso em: 12 jun. 2025.
    • APA

      Bon, D. G., Cavalcanti, T., Thiesen, A., Santos, H., Gutjhar, J., Cintho, O. M., et al. (2024). Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties. International Journal of Advanced Manufacturing Technology, 130( 9-10), 4919-4931. doi:10.1007/s00170-024-12967-4
    • NLM

      Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
    • Vancouver

      Bon DG, Cavalcanti T, Thiesen A, Santos H, Gutjhar J, Cintho OM, Coelho RT, Oliveira MF de, Ribamar GG, Avila JA. Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130( 9-10): 4919-4931.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-024-12967-4
  • Source: Journal of Materials Engineering and Performance. Unidade: EESC

    Subjects: REVESTIMENTOS, CORROSÃO, TRATAMENTO TÉRMICO, LIGAS METÁLICAS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARIANI, Fábio Edson et al. Inconel 625 coating produced by Directed Energy Deposition–Laser Beam (DED-LB) for corrosion-resistant applications. Journal of Materials Engineering and Performance, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s11665-024-10546-y. Acesso em: 12 jun. 2025.
    • APA

      Mariani, F. E., Konno, C. Y. N., Cruz, C. B., Lombardi, A. N., Garcia, A., Cheung, N., et al. (2024). Inconel 625 coating produced by Directed Energy Deposition–Laser Beam (DED-LB) for corrosion-resistant applications. Journal of Materials Engineering and Performance. doi:10.1007/s11665-024-10546-y
    • NLM

      Mariani FE, Konno CYN, Cruz CB, Lombardi AN, Garcia A, Cheung N, Coelho RT, Casteletti LC. Inconel 625 coating produced by Directed Energy Deposition–Laser Beam (DED-LB) for corrosion-resistant applications [Internet]. Journal of Materials Engineering and Performance. 2024 ;[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s11665-024-10546-y
    • Vancouver

      Mariani FE, Konno CYN, Cruz CB, Lombardi AN, Garcia A, Cheung N, Coelho RT, Casteletti LC. Inconel 625 coating produced by Directed Energy Deposition–Laser Beam (DED-LB) for corrosion-resistant applications [Internet]. Journal of Materials Engineering and Performance. 2024 ;[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s11665-024-10546-y
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Assunto: ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ZOPPELLARI, Alexandre Bertho e COELHO, Reginaldo Teixeira. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer. International Journal of Advanced Manufacturing Technology, v. 130, p. 2635-2647, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-12810-2. Acesso em: 12 jun. 2025.
    • APA

      Zoppellari, A. B., & Coelho, R. T. (2024). A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer. International Journal of Advanced Manufacturing Technology, 130, 2635-2647. doi:10.1007/s00170-023-12810-2
    • NLM

      Zoppellari AB, Coelho RT. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130 2635-2647.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-023-12810-2
    • Vancouver

      Zoppellari AB, Coelho RT. A proposal of models for thermal compensation in machine tools based on a formulation for in-series heat transfer [Internet]. International Journal of Advanced Manufacturing Technology. 2024 ; 130 2635-2647.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1007/s00170-023-12810-2
  • Unidade: EESC

    Subjects: TUNGSTÊNIO, SOLDAGEM A ARCO, USINAGEM, SINTERIZAÇÃO

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOREIRA, Alcindo Fernando. Estudo da aplicabilidade de gas tungsten arc welding como fonte de energia para os processos directed energy deposition e powder bed fusion de manufatura aditiva. 2024. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2024. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-03072024-154541/. Acesso em: 12 jun. 2025.
    • APA

      Moreira, A. F. (2024). Estudo da aplicabilidade de gas tungsten arc welding como fonte de energia para os processos directed energy deposition e powder bed fusion de manufatura aditiva (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18163/tde-03072024-154541/
    • NLM

      Moreira AF. Estudo da aplicabilidade de gas tungsten arc welding como fonte de energia para os processos directed energy deposition e powder bed fusion de manufatura aditiva [Internet]. 2024 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-03072024-154541/
    • Vancouver

      Moreira AF. Estudo da aplicabilidade de gas tungsten arc welding como fonte de energia para os processos directed energy deposition e powder bed fusion de manufatura aditiva [Internet]. 2024 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-03072024-154541/
  • Source: Manufacturing Letters. Conference titles: SME North American Manufacturing Research Conference - NAMRC. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, IMPRESSÃO 3-D, LIGAS METÁLICAS, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIBEIRO, Kandice Suane Barros e REGHINI, Ana Cecilia e COELHO, Reginaldo Teixeira. An analytical model for estimating process parameters input in L-DED based on bead geometry. Manufacturing Letters. Amsterdam, Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://dx.doi.org/10.1016/j.mfglet.2024.09.092. Acesso em: 12 jun. 2025. , 2024
    • APA

      Ribeiro, K. S. B., Reghini, A. C., & Coelho, R. T. (2024). An analytical model for estimating process parameters input in L-DED based on bead geometry. Manufacturing Letters. Amsterdam, Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1016/j.mfglet.2024.09.092
    • NLM

      Ribeiro KSB, Reghini AC, Coelho RT. An analytical model for estimating process parameters input in L-DED based on bead geometry [Internet]. Manufacturing Letters. 2024 ; 41 742-752.[citado 2025 jun. 12 ] Available from: https://dx.doi.org/10.1016/j.mfglet.2024.09.092
    • Vancouver

      Ribeiro KSB, Reghini AC, Coelho RT. An analytical model for estimating process parameters input in L-DED based on bead geometry [Internet]. Manufacturing Letters. 2024 ; 41 742-752.[citado 2025 jun. 12 ] Available from: https://dx.doi.org/10.1016/j.mfglet.2024.09.092
  • Source: Journal of Materials Research and Technology. Unidade: EESC

    Subjects: AÇO, FERRAMENTAS, LEITE EM PÓ, RESISTÊNCIA DOS MATERIAIS, DESGASTE DOS MATERIAIS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      OLIVEIRA, Adriel P et al. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, v. no 1, p. 9802-9810, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jmrt.2024.12.012. Acesso em: 12 jun. 2025.
    • APA

      Oliveira, A. P., Ferreira, T., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2024). Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion. Journal of Materials Research and Technology, no 1, 9802-9810. doi:10.1016/j.jmrt.2024.12.012
    • NLM

      Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
    • Vancouver

      Oliveira AP, Ferreira T, Coelho RT, Bolfarini C, Gargarella P. Effect of building direction and heat treatment on the wear behavior of H13 tool steel processed by laser powder bed fusion [Internet]. Journal of Materials Research and Technology. 2024 ; no 1 9802-9810.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1016/j.jmrt.2024.12.012
  • Source: International Journal of Advanced Manufacturing Technology. Unidades: EESC, ICMC

    Subjects: MANUFATURA ADITIVA, PROCESSAMENTO DE IMAGENS, REDES NEURAIS, APRENDIZADO COMPUTACIONAL

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIBEIRO, Kandice Suane Barros et al. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, v. 127, n. 7-8, p. 3183-3194, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11582-z. Acesso em: 12 jun. 2025.
    • APA

      Ribeiro, K. S. B., Nuñez, H. H. L., Venter, G. S., Doude, H. R., & Coelho, R. T. (2023). A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, 127( 7-8), 3183-3194. doi:10.1007/s00170-023-11582-z
    • NLM

      Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
    • Vancouver

      Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
  • Source: Iranian Journal of Materials Science and Engineering. Unidade: EESC

    Subjects: AÇO, REVESTIMENTOS, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MARIANI, Fábio Edson et al. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel. Iranian Journal of Materials Science and Engineering, v. 20, n. 3, p. 1-15, 2023Tradução . . Disponível em: https://dx.doi.org/10.22068/ijmse.3206. Acesso em: 12 jun. 2025.
    • APA

      Mariani, F. E., Figueiredo, G. V., Barragán de Los Rios, G. A., Casteletti, L. C., & Coelho, R. T. (2023). Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel. Iranian Journal of Materials Science and Engineering, 20( 3), 1-15. doi:10.22068/ijmse.3206
    • NLM

      Mariani FE, Figueiredo GV, Barragán de Los Rios GA, Casteletti LC, Coelho RT. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel [Internet]. Iranian Journal of Materials Science and Engineering. 2023 ; 20( 3): 1-15.[citado 2025 jun. 12 ] Available from: https://dx.doi.org/10.22068/ijmse.3206
    • Vancouver

      Mariani FE, Figueiredo GV, Barragán de Los Rios GA, Casteletti LC, Coelho RT. Hardness and wear characteristics of laser-clad WC-17Co coatings on AISI H13 and AISI 4140 steel [Internet]. Iranian Journal of Materials Science and Engineering. 2023 ; 20( 3): 1-15.[citado 2025 jun. 12 ] Available from: https://dx.doi.org/10.22068/ijmse.3206
  • Source: Materials Research. Unidade: EESC

    Subjects: LASER, AÇO FERRAMENTA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      OLIVEIRA, Adriel P. et al. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, v. 26, p. 1-9, 2023Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250. Acesso em: 12 jun. 2025.
    • APA

      Oliveira, A. P., Figueira, G., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2023). Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, 26, 1-9. doi:10.1590/1980-5373-MR-2023-0250
    • NLM

      Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
    • Vancouver

      Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2025 jun. 12 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
  • Unidade: EESC

    Subjects: MANUFATURA ADITIVA, MONITORAMENTO, PROCESSAMENTO DE DADOS, DESENVOLVIMENTO DE SOFTWARE

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIBEIRO, Kandice Suane Barros. An innovative monitoring method using a software capable of 3D mapping data from laser Directed Energy Deposition (L-DED) process. 2023. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2023. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-11042023-145516/. Acesso em: 12 jun. 2025.
    • APA

      Ribeiro, K. S. B. (2023). An innovative monitoring method using a software capable of 3D mapping data from laser Directed Energy Deposition (L-DED) process (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18163/tde-11042023-145516/
    • NLM

      Ribeiro KSB. An innovative monitoring method using a software capable of 3D mapping data from laser Directed Energy Deposition (L-DED) process [Internet]. 2023 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-11042023-145516/
    • Vancouver

      Ribeiro KSB. An innovative monitoring method using a software capable of 3D mapping data from laser Directed Energy Deposition (L-DED) process [Internet]. 2023 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18163/tde-11042023-145516/
  • Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de et al. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. 2023, Anais.. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf. Acesso em: 12 jun. 2025.
    • APA

      Assis, C. L. F. de, Mecelis, G. R., Silva, E. J. da, Rodrigues, A. R., & Coelho, R. T. (2023). Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. In Proceedings. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
    • NLM

      Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2025 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
    • Vancouver

      Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2025 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
  • Source: Water Practice & Technology. Unidade: EESC

    Subjects: POLIMENTO DENTÁRIO, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      NATARAJAN, Pradeep et al. Surface modification of Ti6Al7Nb employing pure waterjet and abrasive waterjet polishing for implant application: comparison study. Water Practice & Technology, v. 10, n. 1, p. 1-15, 2022Tradução . . Disponível em: https://doi.org/10.1088/2051-672X/ac577e. Acesso em: 12 jun. 2025.
    • APA

      Natarajan, P., Sastry, C. C., Brandão, L. C., Coelho, R. T., Bairapudi, A., Manickam, M. A. M., et al. (2022). Surface modification of Ti6Al7Nb employing pure waterjet and abrasive waterjet polishing for implant application: comparison study. Water Practice & Technology, 10( 1), 1-15. doi:10.1088/2051-672X/ac577e
    • NLM

      Natarajan P, Sastry CC, Brandão LC, Coelho RT, Bairapudi A, Manickam MAM, Rahman H, Patil S. Surface modification of Ti6Al7Nb employing pure waterjet and abrasive waterjet polishing for implant application: comparison study [Internet]. Water Practice & Technology. 2022 ; 10( 1): 1-15.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1088/2051-672X/ac577e
    • Vancouver

      Natarajan P, Sastry CC, Brandão LC, Coelho RT, Bairapudi A, Manickam MAM, Rahman H, Patil S. Surface modification of Ti6Al7Nb employing pure waterjet and abrasive waterjet polishing for implant application: comparison study [Internet]. Water Practice & Technology. 2022 ; 10( 1): 1-15.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1088/2051-672X/ac577e
  • Source: Livro de Resumos Expandidos. Conference titles: Simpósio Internacional de Iniciação Científica e Tecnológica da Universidade de São Paulo - SIICUSP. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      REGHINI, Ana Cecilia e RIBEIRO, Kandice Suane Barros e COELHO, Reginaldo Teixeira. Proposta de modelo analítico para auxiliar na definição de parâmetros da manufatura aditiva de metais via DED. 2022, Anais.. São Carlos, SP: EESC/USP, 2022. Disponível em: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3610/2500. Acesso em: 12 jun. 2025.
    • APA

      Reghini, A. C., Ribeiro, K. S. B., & Coelho, R. T. (2022). Proposta de modelo analítico para auxiliar na definição de parâmetros da manufatura aditiva de metais via DED. In Livro de Resumos Expandidos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3610/2500
    • NLM

      Reghini AC, Ribeiro KSB, Coelho RT. Proposta de modelo analítico para auxiliar na definição de parâmetros da manufatura aditiva de metais via DED [Internet]. Livro de Resumos Expandidos. 2022 ;[citado 2025 jun. 12 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3610/2500
    • Vancouver

      Reghini AC, Ribeiro KSB, Coelho RT. Proposta de modelo analítico para auxiliar na definição de parâmetros da manufatura aditiva de metais via DED [Internet]. Livro de Resumos Expandidos. 2022 ;[citado 2025 jun. 12 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3610/2500
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: RUGOSIDADE SUPERFICIAL, FRESAGEM, MANUFATURA ADITIVA, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARRAGAN DE LOS RIOS, German Alberto et al. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM). International Journal of Advanced Manufacturing Technology, p. 1-15, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00170-022-09179-z. Acesso em: 12 jun. 2025.
    • APA

      Barragan De Los Rios, G. A., Ferreira, R., Mariani, F. E., Silva, E. J. da, & Coelho, R. T. (2022). Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM). International Journal of Advanced Manufacturing Technology, 1-15. doi:10.1007/s00170-022-09179-z
    • NLM

      Barragan De Los Rios GA, Ferreira R, Mariani FE, Silva EJ da, Coelho RT. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM) [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-15.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-022-09179-z
    • Vancouver

      Barragan De Los Rios GA, Ferreira R, Mariani FE, Silva EJ da, Coelho RT. Study of the surface roughness of a remanufactured bimetallic AISI 1045 and 316L SS part obtained by hybrid manufacturing (DED/HSM) [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-15.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-022-09179-z
  • Unidade: EESC

    Subjects: SIMULAÇÃO (APRENDIZAGEM), MÉTODO DOS ELEMENTOS FINITOS, TRANSFERÊNCIA DE CALOR, TORNEAMENTO, MÁQUINAS-FERRAMENTA

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ZOPPELLARI, Alexandre Bertho. Modelamento teórico-experimental e simulação pelo método dos elementos finitos de erros térmicos em um centro de torneamento. 2022. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2022. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-25052022-153752/. Acesso em: 12 jun. 2025.
    • APA

      Zoppellari, A. B. (2022). Modelamento teórico-experimental e simulação pelo método dos elementos finitos de erros térmicos em um centro de torneamento (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18156/tde-25052022-153752/
    • NLM

      Zoppellari AB. Modelamento teórico-experimental e simulação pelo método dos elementos finitos de erros térmicos em um centro de torneamento [Internet]. 2022 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-25052022-153752/
    • Vancouver

      Zoppellari AB. Modelamento teórico-experimental e simulação pelo método dos elementos finitos de erros térmicos em um centro de torneamento [Internet]. 2022 ;[citado 2025 jun. 12 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18156/tde-25052022-153752/
  • Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Assunto: ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      DAVIS, Rahul et al. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. International Journal of Advanced Manufacturing Technology, v. 120, p. 1473-1530, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00170-022-08770-8. Acesso em: 12 jun. 2025.
    • APA

      Davis, R., Singh, A., Jackson, M. J., Coelho, R. T., Prakash, D., Charalambous, C. P., et al. (2022). A comprehensive review on metallic implant biomaterials and their subtractive manufacturing. International Journal of Advanced Manufacturing Technology, 120, 1473-1530. doi:10.1007/s00170-022-08770-8
    • NLM

      Davis R, Singh A, Jackson MJ, Coelho RT, Prakash D, Charalambous CP, Ahmed W, Silva LRR, Lawrence AA. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 120 1473-1530.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-022-08770-8
    • Vancouver

      Davis R, Singh A, Jackson MJ, Coelho RT, Prakash D, Charalambous CP, Ahmed W, Silva LRR, Lawrence AA. A comprehensive review on metallic implant biomaterials and their subtractive manufacturing [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 120 1473-1530.[citado 2025 jun. 12 ] Available from: https://doi.org/10.1007/s00170-022-08770-8
  • Source: Livro de Resumos Expandidos. Conference titles: Simpósio Internacional de Iniciação Científica e Tecnológica da Universidade de São Paulo - SIICUSP. Unidade: EESC

    Subjects: REVESTIMENTOS, DESGASTE DOS MATERIAIS, ENGENHARIA DE PRODUÇÃO

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SILVA, Pablo Henrique da et al. Caractarização de revestimentos MMC (Metal Matrix Composite) de Ni-5Al-5Mo/B4C produzidos por meio de laser cladding. 2022, Anais.. São Carlos, SP: EESC/USP, 2022. Disponível em: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3589/2463. Acesso em: 12 jun. 2025.
    • APA

      Silva, P. H. da, Silva, M. V. dos S. da, Mariani, F. E., & Coelho, R. T. (2022). Caractarização de revestimentos MMC (Metal Matrix Composite) de Ni-5Al-5Mo/B4C produzidos por meio de laser cladding. In Livro de Resumos Expandidos. São Carlos, SP: EESC/USP. Recuperado de http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3589/2463
    • NLM

      Silva PH da, Silva MV dos S da, Mariani FE, Coelho RT. Caractarização de revestimentos MMC (Metal Matrix Composite) de Ni-5Al-5Mo/B4C produzidos por meio de laser cladding [Internet]. Livro de Resumos Expandidos. 2022 ;[citado 2025 jun. 12 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3589/2463
    • Vancouver

      Silva PH da, Silva MV dos S da, Mariani FE, Coelho RT. Caractarização de revestimentos MMC (Metal Matrix Composite) de Ni-5Al-5Mo/B4C produzidos por meio de laser cladding [Internet]. Livro de Resumos Expandidos. 2022 ;[citado 2025 jun. 12 ] Available from: http://soac.eesc.usp.br/index.php/siicusp/30siicusp/paper/viewFile/3589/2463

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2025