Filtros : "EEL" "SANDIM, HUGO RICARDO ZSCHOMMLER" Limpar

Filtros



Refine with date range


  • Source: Acta Materialia. Unidades: IF, EEL

    Assunto: MANGANÊS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SANDIM, Maria Jose Ramos et al. Anomalous magnetization induced by local chemistry fluctuations in Mn-containing α’-martensite. Acta Materialia, v. 272, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.actamat.2024.119956. Acesso em: 06 out. 2024.
    • APA

      Sandim, M. J. R., Nagamine, L. C. C. M., Silva, A. K. da, Aota, L. S., Han, L., Cohen, R., et al. (2024). Anomalous magnetization induced by local chemistry fluctuations in Mn-containing α’-martensite. Acta Materialia, 272. doi:10.1016/j.actamat.2024.119956
    • NLM

      Sandim MJR, Nagamine LCCM, Silva AK da, Aota LS, Han L, Cohen R, Sandim HRZ, Gault B, Souza Filho IR de. Anomalous magnetization induced by local chemistry fluctuations in Mn-containing α’-martensite [Internet]. Acta Materialia. 2024 ; 272[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2024.119956
    • Vancouver

      Sandim MJR, Nagamine LCCM, Silva AK da, Aota LS, Han L, Cohen R, Sandim HRZ, Gault B, Souza Filho IR de. Anomalous magnetization induced by local chemistry fluctuations in Mn-containing α’-martensite [Internet]. Acta Materialia. 2024 ; 272[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2024.119956
  • Unidades: IQSC, EEL, IF, EP, IFSC

    Subjects: ENGENHARIA MECÂNICA, MATERIAIS

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      Materials Research: Ibero-american Journal of Materials. . São Carlos: Universidade Federal de São Carlos - UFSCar. Disponível em: https://repositorio.usp.br/directbitstream/c794cc43-5782-4b58-a3bd-4fe2c542d869/P21092.pdf. Acesso em: 06 out. 2024. , 2024
    • APA

      Materials Research: Ibero-american Journal of Materials. (2024). Materials Research: Ibero-american Journal of Materials. São Carlos: Universidade Federal de São Carlos - UFSCar. Recuperado de https://repositorio.usp.br/directbitstream/c794cc43-5782-4b58-a3bd-4fe2c542d869/P21092.pdf
    • NLM

      Materials Research: Ibero-american Journal of Materials [Internet]. 2024 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/c794cc43-5782-4b58-a3bd-4fe2c542d869/P21092.pdf
    • Vancouver

      Materials Research: Ibero-american Journal of Materials [Internet]. 2024 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/c794cc43-5782-4b58-a3bd-4fe2c542d869/P21092.pdf
  • Unidades: IQSC, EEL, IF, EP, IFSC

    Subjects: ENGENHARIA MECÂNICA, MATERIAIS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      Materials Research: ibero-american Journal of Materials. . São Carlos: Universidade Federal de São Carlos - UFSCar. Disponível em: https://repositorio.usp.br/directbitstream/e380a141-a9c0-48d2-a928-9421b94ed234/P20526.pdf. Acesso em: 06 out. 2024. , 2023
    • APA

      Materials Research: ibero-american Journal of Materials. (2023). Materials Research: ibero-american Journal of Materials. São Carlos: Universidade Federal de São Carlos - UFSCar. Recuperado de https://repositorio.usp.br/directbitstream/e380a141-a9c0-48d2-a928-9421b94ed234/P20526.pdf
    • NLM

      Materials Research: ibero-american Journal of Materials [Internet]. 2023 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/e380a141-a9c0-48d2-a928-9421b94ed234/P20526.pdf
    • Vancouver

      Materials Research: ibero-american Journal of Materials [Internet]. 2023 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/e380a141-a9c0-48d2-a928-9421b94ed234/P20526.pdf
  • Source: Nuclear Materials And Energy. Unidade: EEL

    Subjects: MATERIAIS, RECRISTALIZAÇÃO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ZILNYK, K. D. e SUZUKI, Paulo Atsushi e SANDIM, Hugo Ricardo Zschommler. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel. Nuclear Materials And Energy, v. 35, p. 1-10 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.nme.2023.101450. Acesso em: 06 out. 2024.
    • APA

      Zilnyk, K. D., Suzuki, P. A., & Sandim, H. R. Z. (2023). Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel. Nuclear Materials And Energy, 35, 1-10 . doi:10.1016/j.nme.2023.101450
    • NLM

      Zilnyk KD, Suzuki PA, Sandim HRZ. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel [Internet]. Nuclear Materials And Energy. 2023 ;35 1-10 .[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.nme.2023.101450
    • Vancouver

      Zilnyk KD, Suzuki PA, Sandim HRZ. Subtle microstructural changes during prolonged annealing of ODS-Eurofer steel [Internet]. Nuclear Materials And Energy. 2023 ;35 1-10 .[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.nme.2023.101450
  • Source: Materials characterization. Unidade: EEL

    Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, AÇO INOXIDÁVEL DUPLEX, MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MOTA, Cristiane Fátima Guimarães Silveira et al. Austenite reversion in lean duplex steel: Microstructural, dilatometric and magnetic characterization. Materials characterization, v. 195, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2022.112509. Acesso em: 06 out. 2024.
    • APA

      Mota, C. F. G. S., Aota, L. S., Sandim, H. R. Z., Zilnyk, K. D., & Sandim, M. J. R. (2023). Austenite reversion in lean duplex steel: Microstructural, dilatometric and magnetic characterization. Materials characterization, 195, 1-12. doi:10.1016/j.matchar.2022.112509
    • NLM

      Mota CFGS, Aota LS, Sandim HRZ, Zilnyk KD, Sandim MJR. Austenite reversion in lean duplex steel: Microstructural, dilatometric and magnetic characterization [Internet]. Materials characterization. 2023 ;195 1-12.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.matchar.2022.112509
    • Vancouver

      Mota CFGS, Aota LS, Sandim HRZ, Zilnyk KD, Sandim MJR. Austenite reversion in lean duplex steel: Microstructural, dilatometric and magnetic characterization [Internet]. Materials characterization. 2023 ;195 1-12.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.matchar.2022.112509
  • Source: International journal of refractory metals & hard materials. Unidade: EEL

    Subjects: MOLIBDÊNIO, MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy. International journal of refractory metals & hard materials, v. 112, p. 1-8, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.ijrmhm.2023.106124. Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Knabl, W., Kestler, H., & Sandim, H. R. Z. (2023). Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy. International journal of refractory metals & hard materials, 112, 1-8. doi:10.1016/j.ijrmhm.2023.106124
    • NLM

      Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy [Internet]. International journal of refractory metals & hard materials. 2023 ;112 1-8.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ijrmhm.2023.106124
    • Vancouver

      Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-rate effects on the recrystallization of molybdenum-based MZ17 alloy [Internet]. International journal of refractory metals & hard materials. 2023 ;112 1-8.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.ijrmhm.2023.106124
  • Source: Journal of materials engineering and performance. Unidade: EEL

    Assunto: MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PINTO, Filipe Corrêa e SANDIM, Hugo Ricardo Zschommler. Electron beam welding of API 5L X65 steel. Journal of materials engineering and performance, v. 32, n. 8 , p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1007/s11665-023-08153-4. Acesso em: 06 out. 2024.
    • APA

      Pinto, F. C., & Sandim, H. R. Z. (2023). Electron beam welding of API 5L X65 steel. Journal of materials engineering and performance, 32( 8 ), 1-10. doi:10.1007/s11665-023-08153-4
    • NLM

      Pinto FC, Sandim HRZ. Electron beam welding of API 5L X65 steel [Internet]. Journal of materials engineering and performance. 2023 ; 32( 8 ): 1-10.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s11665-023-08153-4
    • Vancouver

      Pinto FC, Sandim HRZ. Electron beam welding of API 5L X65 steel [Internet]. Journal of materials engineering and performance. 2023 ; 32( 8 ): 1-10.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s11665-023-08153-4
  • Source: Journal of materials science. Unidade: EEL

    Subjects: METAIS, METALOGRAFIA, RECRISTALIZAÇÃO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PINTO, Filipe Corrêa et al. Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics. Journal of materials science, n. , p. 9576-9598, 2022Tradução . . Disponível em: https://doi.org/10.1007/s10853-021-06859-1. Acesso em: 06 out. 2024.
    • APA

      Pinto, F. C., Aota, L. S., Souza Filho, I. R. de, Raabe, D., & Sandim, H. R. Z. (2022). Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics. Journal of materials science, ( ), 9576-9598. doi:10.1007/s10853-021-06859-1
    • NLM

      Pinto FC, Aota LS, Souza Filho IR de, Raabe D, Sandim HRZ. Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics [Internet]. Journal of materials science. 2022 ;( ): 9576-9598.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s10853-021-06859-1
    • Vancouver

      Pinto FC, Aota LS, Souza Filho IR de, Raabe D, Sandim HRZ. Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics [Internet]. Journal of materials science. 2022 ;( ): 9576-9598.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s10853-021-06859-1
  • Source: Materials science and engineering a-structural materials properties microstructure and processing. Unidade: EEL

    Subjects: DEFORMAÇÃO ESTRUTURAL, DEFORMAÇÃO E ESTRESSES, PLASTICIDADE DAS ESTRUTURAS, MECÂNICA DA FRATURA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      AOTA, L. S et al. Strain hardening engineering via grain size control in laser powder-bed fusion. Materials science and engineering a-structural materials properties microstructure and processing, v. 838, p. 142773-, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.msea.2022.142773. Acesso em: 06 out. 2024.
    • APA

      Aota, L. S., Souza Filho, I. R. de, Roscher, M., Ponge, D., & Sandim, H. R. Z. (2022). Strain hardening engineering via grain size control in laser powder-bed fusion. Materials science and engineering a-structural materials properties microstructure and processing, 838, 142773-. doi:10.1016/j.msea.2022.142773
    • NLM

      Aota LS, Souza Filho IR de, Roscher M, Ponge D, Sandim HRZ. Strain hardening engineering via grain size control in laser powder-bed fusion [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2022 ;838 142773-.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2022.142773
    • Vancouver

      Aota LS, Souza Filho IR de, Roscher M, Ponge D, Sandim HRZ. Strain hardening engineering via grain size control in laser powder-bed fusion [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2022 ;838 142773-.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2022.142773
  • Source: 20th Plansee Seminar 2022 - Proceedings. Unidade: EEL

    Subjects: REFRATÁRIOS, MOLIBDÊNIO

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Strain-Rate Effects on the Recrystallization of Molybdenum-Based MZ17 Alloy. 20th Plansee Seminar 2022 - Proceedings. [S.l.]: Plansee Group Functions Austria GmbH. . Acesso em: 06 out. 2024. , 2022
    • APA

      Souza Filho, I. R. de, Knabl, W., Kestler, H., & Sandim, H. R. Z. (2022). Strain-Rate Effects on the Recrystallization of Molybdenum-Based MZ17 Alloy. 20th Plansee Seminar 2022 - Proceedings. Plansee Group Functions Austria GmbH.
    • NLM

      Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-Rate Effects on the Recrystallization of Molybdenum-Based MZ17 Alloy. 20th Plansee Seminar 2022 - Proceedings. 2022 ;1-11.[citado 2024 out. 06 ]
    • Vancouver

      Souza Filho IR de, Knabl W, Kestler H, Sandim HRZ. Strain-Rate Effects on the Recrystallization of Molybdenum-Based MZ17 Alloy. 20th Plansee Seminar 2022 - Proceedings. 2022 ;1-11.[citado 2024 out. 06 ]
  • Unidades: IFSC, IQSC, FZEA, EP, EEL, EESC

    Subjects: EVENTOS, MATERIAIS CERÂMICOS, MATERIAIS

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      Congresso Brasileiro de Engenharia e Ciência dos Materiais - CBECiMat, 24. . São Paulo: Associação Brasileira de Cerâmica - ABCERAM. Disponível em: https://repositorio.usp.br/directbitstream/34650829-4418-4db9-8afc-a89a7af9154e/P20228.pdf. Acesso em: 06 out. 2024. , 2022
    • APA

      Congresso Brasileiro de Engenharia e Ciência dos Materiais - CBECiMat, 24. (2022). Congresso Brasileiro de Engenharia e Ciência dos Materiais - CBECiMat, 24. São Paulo: Associação Brasileira de Cerâmica - ABCERAM. Recuperado de https://repositorio.usp.br/directbitstream/34650829-4418-4db9-8afc-a89a7af9154e/P20228.pdf
    • NLM

      Congresso Brasileiro de Engenharia e Ciência dos Materiais - CBECiMat, 24 [Internet]. 2022 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/34650829-4418-4db9-8afc-a89a7af9154e/P20228.pdf
    • Vancouver

      Congresso Brasileiro de Engenharia e Ciência dos Materiais - CBECiMat, 24 [Internet]. 2022 ;[citado 2024 out. 06 ] Available from: https://repositorio.usp.br/directbitstream/34650829-4418-4db9-8afc-a89a7af9154e/P20228.pdf
  • Source: Journal of Magnetism and Magnetic Materials. Unidades: EEL, EP

    Assunto: INDUÇÃO MAGNÉTICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      FULOP, Guilherme Origo et al. High saturation magnetic induction and low magnetostriction of a novel ferritic Fe-Ti alloy compared to a non-oriented silicon steel. Journal of Magnetism and Magnetic Materials, v. 527, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmmm.2020.167702. Acesso em: 06 out. 2024.
    • APA

      Fulop, G. O., Dias, M. B. de S., Sandim, H. R. Z., & NUNES, C. B. (2021). High saturation magnetic induction and low magnetostriction of a novel ferritic Fe-Ti alloy compared to a non-oriented silicon steel. Journal of Magnetism and Magnetic Materials, 527. doi:10.1016/j.jmmm.2020.167702
    • NLM

      Fulop GO, Dias MB de S, Sandim HRZ, NUNES CB. High saturation magnetic induction and low magnetostriction of a novel ferritic Fe-Ti alloy compared to a non-oriented silicon steel [Internet]. Journal of Magnetism and Magnetic Materials. 2021 ; 527[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jmmm.2020.167702
    • Vancouver

      Fulop GO, Dias MB de S, Sandim HRZ, NUNES CB. High saturation magnetic induction and low magnetostriction of a novel ferritic Fe-Ti alloy compared to a non-oriented silicon steel [Internet]. Journal of Magnetism and Magnetic Materials. 2021 ; 527[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jmmm.2020.167702
  • Source: Journal of Magnetism and Magnetic Materials. Unidade: EEL

    Subjects: INDUÇÃO DE METAIS, MAGNETISMO

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SANDIM, Maria Jose Ramos et al. Microstructural and magnetic characterization of a lean duplex steel: Strain-induced martensite formation and austenite reversion. Journal of Magnetism and Magnetic Materials, v. 517, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmmm.2020.167370. Acesso em: 06 out. 2024.
    • APA

      Sandim, M. J. R., Souza Filho, I. R. de, MOTA, C. F. G. S., Sandim, H. R. Z., & Zilnyk, K. D. (2021). Microstructural and magnetic characterization of a lean duplex steel: Strain-induced martensite formation and austenite reversion. Journal of Magnetism and Magnetic Materials, 517. doi:10.1016/j.jmmm.2020.167370
    • NLM

      Sandim MJR, Souza Filho IR de, MOTA CFGS, Sandim HRZ, Zilnyk KD. Microstructural and magnetic characterization of a lean duplex steel: Strain-induced martensite formation and austenite reversion [Internet]. Journal of Magnetism and Magnetic Materials. 2021 ; 517[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jmmm.2020.167370
    • Vancouver

      Sandim MJR, Souza Filho IR de, MOTA CFGS, Sandim HRZ, Zilnyk KD. Microstructural and magnetic characterization of a lean duplex steel: Strain-induced martensite formation and austenite reversion [Internet]. Journal of Magnetism and Magnetic Materials. 2021 ; 517[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jmmm.2020.167370
  • Source: Acta materialia. Unidades: EEL, EP

    Assunto: TENSÃO ESTRUTURAL

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning. Acta materialia, n. 197, p. 123-136, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.actamat.2020.07.038. Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Dutta, A. K., Almeida Junior, D. R., Lu, W., Sandim, M. J. R., Ponge, D., et al. (2020). The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning. Acta materialia, ( 197), 123-136. doi:10.1016/j.actamat.2020.07.038
    • NLM

      Souza Filho IR de, Dutta AK, Almeida Junior DR, Lu W, Sandim MJR, Ponge D, Sandim HRZ, Raabe D. The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning [Internet]. Acta materialia. 2020 ;( 197): 123-136.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2020.07.038
    • Vancouver

      Souza Filho IR de, Dutta AK, Almeida Junior DR, Lu W, Sandim MJR, Ponge D, Sandim HRZ, Raabe D. The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α’ transformation to twinning [Internet]. Acta materialia. 2020 ;( 197): 123-136.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2020.07.038
  • Source: Materials science and engineering a-structural materials properties microstructure and processing. Unidade: EEL

    Assunto: MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture. Materials science and engineering a-structural materials properties microstructure and processing, v. 74, p. 636-649, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.msea.2019.03.116. Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Sandim, M. J. R., Ponge, D., Sandim, H. R. Z., & Raabe, D. (2019). Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture. Materials science and engineering a-structural materials properties microstructure and processing, 74, 636-649. doi:10.1016/j.msea.2019.03.116
    • NLM

      Souza Filho IR de, Sandim MJR, Ponge D, Sandim HRZ, Raabe D. Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2019 ;74 636-649.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2019.03.116
    • Vancouver

      Souza Filho IR de, Sandim MJR, Ponge D, Sandim HRZ, Raabe D. Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2019 ;74 636-649.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2019.03.116
  • Source: Journal of nuclear materials. Unidade: EEL

    Assunto: MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ALMEIDA JUNIOR, D. R. et al. Reconstructing the austenite parent microstructure of martensitic steels: A case study for reduced-activation Eurofer steels. Journal of nuclear materials, n. , p. 185-193, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.jnucmat.2019.01.022. Acesso em: 06 out. 2024.
    • APA

      Almeida Junior, D. R., Zilnyk, K. D., Raabe, D., & Sandim, H. R. Z. (2019). Reconstructing the austenite parent microstructure of martensitic steels: A case study for reduced-activation Eurofer steels. Journal of nuclear materials, ( ), 185-193. doi:10.1016/j.jnucmat.2019.01.022
    • NLM

      Almeida Junior DR, Zilnyk KD, Raabe D, Sandim HRZ. Reconstructing the austenite parent microstructure of martensitic steels: A case study for reduced-activation Eurofer steels [Internet]. Journal of nuclear materials. 2019 ;( ): 185-193.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jnucmat.2019.01.022
    • Vancouver

      Almeida Junior DR, Zilnyk KD, Raabe D, Sandim HRZ. Reconstructing the austenite parent microstructure of martensitic steels: A case study for reduced-activation Eurofer steels [Internet]. Journal of nuclear materials. 2019 ;( ): 185-193.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.jnucmat.2019.01.022
  • Source: Materials science and engineering a-structural materials properties microstructure and processing. Unidades: EEL, FZEA, EP

    Assunto: MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Austenite reversion in AISI 201 austenitic stainless steel evaluated via in situ synchrotron X-ray diffraction during slow continuous annealing. Materials science and engineering a-structural materials properties microstructure and processing, v. 755, p. 267-277, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.msea.2019.04.014. Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Almeida Junior, D. R., Gauss, C., Sandim, M. J. R., Suzuki, P. A., & Sandim, H. R. Z. (2019). Austenite reversion in AISI 201 austenitic stainless steel evaluated via in situ synchrotron X-ray diffraction during slow continuous annealing. Materials science and engineering a-structural materials properties microstructure and processing, 755, 267-277. doi:10.1016/j.msea.2019.04.014
    • NLM

      Souza Filho IR de, Almeida Junior DR, Gauss C, Sandim MJR, Suzuki PA, Sandim HRZ. Austenite reversion in AISI 201 austenitic stainless steel evaluated via in situ synchrotron X-ray diffraction during slow continuous annealing [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2019 ;755 267-277.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2019.04.014
    • Vancouver

      Souza Filho IR de, Almeida Junior DR, Gauss C, Sandim MJR, Suzuki PA, Sandim HRZ. Austenite reversion in AISI 201 austenitic stainless steel evaluated via in situ synchrotron X-ray diffraction during slow continuous annealing [Internet]. Materials science and engineering a-structural materials properties microstructure and processing. 2019 ;755 267-277.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.msea.2019.04.014
  • Source: Acta materialia. Unidade: EEL

    Assunto: MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation. Acta materialia, v. 166, p. 178-191, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.actamat.2018.12.046. Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Silva, A. K. da, Sandim, M. J. R., Ponge, D., Gault, B., Sandim, H. R. Z., & Raabe, D. (2019). Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation. Acta materialia, 166, 178-191. doi:10.1016/j.actamat.2018.12.046
    • NLM

      Souza Filho IR de, Silva AK da, Sandim MJR, Ponge D, Gault B, Sandim HRZ, Raabe D. Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation [Internet]. Acta materialia. 2019 ;166 178-191.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2018.12.046
    • Vancouver

      Souza Filho IR de, Silva AK da, Sandim MJR, Ponge D, Gault B, Sandim HRZ, Raabe D. Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation [Internet]. Acta materialia. 2019 ;166 178-191.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.actamat.2018.12.046
  • Source: Revista Galileu. Unidade: EEL

    Assunto: NIÓBIO

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SANDIM, Hugo Ricardo Zschommler et al. Dossiê: Nióbio. Tradução . Revista Galileu, 2019. , p. 35-42. Acesso em: 06 out. 2024.
    • APA

      Sandim, H. R. Z., Nunes, C. A., Costa, E., & Ribeiro, E. (2019). Dossiê: Nióbio. Revista Galileu, p. 35-42. Escola de Engenharia de Lorena, Universidade de São Paulo.
    • NLM

      Sandim HRZ, Nunes CA, Costa E, Ribeiro E. Dossiê: Nióbio. Revista Galileu. 2019 ;35-42.[citado 2024 out. 06 ]
    • Vancouver

      Sandim HRZ, Nunes CA, Costa E, Ribeiro E. Dossiê: Nióbio. Revista Galileu. 2019 ;35-42.[citado 2024 out. 06 ]
  • Source: 29th Annual Users Meeting (RAU)-Brazilian Center for Research in Energy and Materials (CNPEM). Unidade: EEL

    Assunto: MATERIAIS

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SOUZA FILHO, Isnaldi Rodrigues de et al. Micromechanical aspects of the austenite reversion in a high-Mn steel evaluated by in-situ synchrotron X-ray diffraction. 2019, Anais.. [S.l.]: Escola de Engenharia de Lorena, Universidade de São Paulo, 2019. p. 83-83. . Acesso em: 06 out. 2024.
    • APA

      Souza Filho, I. R. de, Almeida Junior, D. R., Sandim, H. R. Z., Suzuki, P. A., & Sandim, M. J. R. (2019). Micromechanical aspects of the austenite reversion in a high-Mn steel evaluated by in-situ synchrotron X-ray diffraction. In 29th Annual Users Meeting (RAU)-Brazilian Center for Research in Energy and Materials (CNPEM) (p. 83-83). Escola de Engenharia de Lorena, Universidade de São Paulo.
    • NLM

      Souza Filho IR de, Almeida Junior DR, Sandim HRZ, Suzuki PA, Sandim MJR. Micromechanical aspects of the austenite reversion in a high-Mn steel evaluated by in-situ synchrotron X-ray diffraction. 29th Annual Users Meeting (RAU)-Brazilian Center for Research in Energy and Materials (CNPEM). 2019 ;83-83.[citado 2024 out. 06 ]
    • Vancouver

      Souza Filho IR de, Almeida Junior DR, Sandim HRZ, Suzuki PA, Sandim MJR. Micromechanical aspects of the austenite reversion in a high-Mn steel evaluated by in-situ synchrotron X-ray diffraction. 29th Annual Users Meeting (RAU)-Brazilian Center for Research in Energy and Materials (CNPEM). 2019 ;83-83.[citado 2024 out. 06 ]

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024