ReP USP - Resultado da busca

Artigo de periodico
A stable mixed finite element method for the simulation of stokes flow using divergence balanced H(Div)-L2 pair of approximation spaces (2025)
Puga, Carlos Henrique Chama ; Avancini, Giovane ; Shauer, Nathan ; Carvalho, Pablo Giovanni Silva ; Devloo, Philippe Remy Bernard
Source: International Journal for Numerical Methods in Engineering. Unidade: ICMC
Subjects: EQUAÇÕES DE NAVIER-STOKES, MÉTODO DOS ELEMENTOS FINITOS, MECÂNICA DOS FLUÍDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PUGA, Carlos Henrique Chama et al. A stable mixed finite element method for the simulation of stokes flow using divergence balanced H(Div)-L2 pair of approximation spaces. International Journal for Numerical Methods in Engineering, v. 126, n. Ja 2025, p. 1-24, 2025Tradução . . Disponível em: https://doi.org/10.1002/nme.7629. Acesso em: 22 abr. 2025.
APA
Puga, C. H. C., Avancini, G., Shauer, N., Carvalho, P. G. S., & Devloo, P. R. B. (2025). A stable mixed finite element method for the simulation of stokes flow using divergence balanced H(Div)-L2 pair of approximation spaces. International Journal for Numerical Methods in Engineering, 126( Ja 2025), 1-24. doi:10.1002/nme.7629
NLM
Puga CHC, Avancini G, Shauer N, Carvalho PGS, Devloo PRB. A stable mixed finite element method for the simulation of stokes flow using divergence balanced H(Div)-L2 pair of approximation spaces [Internet]. International Journal for Numerical Methods in Engineering. 2025 ; 126( Ja 2025): 1-24.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7629
Vancouver
Puga CHC, Avancini G, Shauer N, Carvalho PGS, Devloo PRB. A stable mixed finite element method for the simulation of stokes flow using divergence balanced H(Div)-L2 pair of approximation spaces [Internet]. International Journal for Numerical Methods in Engineering. 2025 ; 126( Ja 2025): 1-24.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7629
Artigo de periodico
The failure prediction of reinforced composite quasi-brittle structures by an improved version of the extended lumped damage approach (2025)
Teles, Daniel Victor da Cunha; Amorim, David Leonardo Nascimento de Figueiredo; Leonel, Edson Denner
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MECÂNICA DO DANO, MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TELES, Daniel Victor da Cunha e AMORIM, David Leonardo Nascimento de Figueiredo e LEONEL, Edson Denner. The failure prediction of reinforced composite quasi-brittle structures by an improved version of the extended lumped damage approach. International Journal for Numerical Methods in Engineering, v. 126, p. 1-18, 2025Tradução . . Disponível em: http://dx.doi.org/10.1002/nme.70006. Acesso em: 22 abr. 2025.
APA
Teles, D. V. da C., Amorim, D. L. N. de F., & Leonel, E. D. (2025). The failure prediction of reinforced composite quasi-brittle structures by an improved version of the extended lumped damage approach. International Journal for Numerical Methods in Engineering, 126, 1-18. doi:10.1002/nme.70006
NLM
Teles DV da C, Amorim DLN de F, Leonel ED. The failure prediction of reinforced composite quasi-brittle structures by an improved version of the extended lumped damage approach [Internet]. International Journal for Numerical Methods in Engineering. 2025 ; 126 1-18.[citado 2025 abr. 22 ] Available from: http://dx.doi.org/10.1002/nme.70006
Vancouver
Teles DV da C, Amorim DLN de F, Leonel ED. The failure prediction of reinforced composite quasi-brittle structures by an improved version of the extended lumped damage approach [Internet]. International Journal for Numerical Methods in Engineering. 2025 ; 126 1-18.[citado 2025 abr. 22 ] Available from: http://dx.doi.org/10.1002/nme.70006
Artigo de periodico
Dipole-based BEM formulation for three-dimensional cohesive crack propagation modelling (2024)
Almeida, Luis Philipe Ribeiro; Leonel, Edson Denner
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MECÂNICA DA FRATURA, MÉTODO DOS ELEMENTOS DE CONTORNO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Luis Philipe Ribeiro e LEONEL, Edson Denner. Dipole-based BEM formulation for three-dimensional cohesive crack propagation modelling. International Journal for Numerical Methods in Engineering, p. 1-40, 2024Tradução . . Disponível em: http://dx.doi.org/10.1002/nme.7535. Acesso em: 22 abr. 2025.
APA
Almeida, L. P. R., & Leonel, E. D. (2024). Dipole-based BEM formulation for three-dimensional cohesive crack propagation modelling. International Journal for Numerical Methods in Engineering, 1-40. doi:10.1002/nme.7535
NLM
Almeida LPR, Leonel ED. Dipole-based BEM formulation for three-dimensional cohesive crack propagation modelling [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 1-40.[citado 2025 abr. 22 ] Available from: http://dx.doi.org/10.1002/nme.7535
Vancouver
Almeida LPR, Leonel ED. Dipole-based BEM formulation for three-dimensional cohesive crack propagation modelling [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 1-40.[citado 2025 abr. 22 ] Available from: http://dx.doi.org/10.1002/nme.7535
Artigo de periodico
Numerical strategy for solving general C1-continuous beam-to-beam contact problems (2024)
Faccio Júnior, Celso Jaco ; Gay Neto, Alfredo ; Wriggers, Peter
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: FUNÇÕES SPLINE, VIGAS, MECÂNICA DOS SÓLIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FACCIO JÚNIOR, Celso Jaco e GAY NETO, Alfredo e WRIGGERS, Peter. Numerical strategy for solving general C1-continuous beam-to-beam contact problems. International Journal for Numerical Methods in Engineering, v. 125, n. 5, p. 26 on-line, 2024Tradução . . Disponível em: https://doi.org/10.1002/nme.7394. Acesso em: 22 abr. 2025.
APA
Faccio Júnior, C. J., Gay Neto, A., & Wriggers, P. (2024). Numerical strategy for solving general C1-continuous beam-to-beam contact problems. International Journal for Numerical Methods in Engineering, 125( 5), 26 on-line. doi:10.1002/nme.7394
NLM
Faccio Júnior CJ, Gay Neto A, Wriggers P. Numerical strategy for solving general C1-continuous beam-to-beam contact problems [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 125( 5): 26 on-line.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7394
Vancouver
Faccio Júnior CJ, Gay Neto A, Wriggers P. Numerical strategy for solving general C1-continuous beam-to-beam contact problems [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 125( 5): 26 on-line.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7394
Artigo de periodico
A semi-hybrid-mixed method for Stokes-Brinkman-Darcy flows with H(div)-velocity fields (2024)
Carvalho, Pablo Giovanni Silva ; Devloo, Philippe Remy Bernard ; Gomes, Sônia Maria
Source: International Journal for Numerical Methods in Engineering. Unidade: ICMC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MECÂNICA DOS FLUÍDOS COMPUTACIONAL, TEOREMA DE STOKES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Pablo Giovanni Silva e DEVLOO, Philippe Remy Bernard e GOMES, Sônia Maria. A semi-hybrid-mixed method for Stokes-Brinkman-Darcy flows with H(div)-velocity fields. International Journal for Numerical Methods in Engineering, v. 125, n. Ja 2024, p. 1-36, 2024Tradução . . Disponível em: https://doi.org/10.1002/nme.7363. Acesso em: 22 abr. 2025.
APA
Carvalho, P. G. S., Devloo, P. R. B., & Gomes, S. M. (2024). A semi-hybrid-mixed method for Stokes-Brinkman-Darcy flows with H(div)-velocity fields. International Journal for Numerical Methods in Engineering, 125( Ja 2024), 1-36. doi:10.1002/nme.7363
NLM
Carvalho PGS, Devloo PRB, Gomes SM. A semi-hybrid-mixed method for Stokes-Brinkman-Darcy flows with H(div)-velocity fields [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 125( Ja 2024): 1-36.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7363
Vancouver
Carvalho PGS, Devloo PRB, Gomes SM. A semi-hybrid-mixed method for Stokes-Brinkman-Darcy flows with H(div)-velocity fields [Internet]. International Journal for Numerical Methods in Engineering. 2024 ; 125( Ja 2024): 1-36.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7363
Artigo de periodico
Recovery strategies, a posteriori error estimation, and local error indication for second-order G/XFEM and FEM (2023)
Bento, Murilo Henrique Campana; Proença, Sérgio Persival Baroncini ; Duarte, Carlos Armando
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MECÂNICA DA FRATURA, MÉTODO DOS ELEMENTOS FINITOS, ERRO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BENTO, Murilo Henrique Campana e PROENÇA, Sérgio Persival Baroncini e DUARTE, Carlos Armando. Recovery strategies, a posteriori error estimation, and local error indication for second-order G/XFEM and FEM. International Journal for Numerical Methods in Engineering, p. 1-38, 2023Tradução . . Disponível em: https://doi.org/10.1002/nme.7238. Acesso em: 22 abr. 2025.
APA
Bento, M. H. C., Proença, S. P. B., & Duarte, C. A. (2023). Recovery strategies, a posteriori error estimation, and local error indication for second-order G/XFEM and FEM. International Journal for Numerical Methods in Engineering, 1-38. doi:10.1002/nme.7238
NLM
Bento MHC, Proença SPB, Duarte CA. Recovery strategies, a posteriori error estimation, and local error indication for second-order G/XFEM and FEM [Internet]. International Journal for Numerical Methods in Engineering. 2023 ; 1-38.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7238
Vancouver
Bento MHC, Proença SPB, Duarte CA. Recovery strategies, a posteriori error estimation, and local error indication for second-order G/XFEM and FEM [Internet]. International Journal for Numerical Methods in Engineering. 2023 ; 1-38.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.7238
Artigo de periodico
Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints (2021)
Silva, Gustavo Assis da; Aage, Niels; Beck, André Teófilo ; Sigmund, Ole
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MANUFATURA ADITIVA, TOPOLOGIA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Gustavo Assis da et al. Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints. International Journal for Numerical Methods in Engineering, v. 122, p. 548-578, 2021Tradução . . Disponível em: https://doi.org/10.1002/nme.6548. Acesso em: 22 abr. 2025.
APA
Silva, G. A. da, Aage, N., Beck, A. T., & Sigmund, O. (2021). Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints. International Journal for Numerical Methods in Engineering, 122, 548-578. doi:10.1002/nme.6548
NLM
Silva GA da, Aage N, Beck AT, Sigmund O. Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints [Internet]. International Journal for Numerical Methods in Engineering. 2021 ; 122 548-578.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6548
Vancouver
Silva GA da, Aage N, Beck AT, Sigmund O. Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints [Internet]. International Journal for Numerical Methods in Engineering. 2021 ; 122 548-578.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6548
Artigo de periodico
Local versus global stress constraint strategies in topology optimization: a comparative study (2021)
Silva, Gustavo Assis da; Aage, Niels; Beck, André Teófilo ; Sigmund, Ole
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: TOPOLOGIA, TENSÃO ESTRUTURAL, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Gustavo Assis da et al. Local versus global stress constraint strategies in topology optimization: a comparative study. International Journal for Numerical Methods in Engineering, p. 1-34, 2021Tradução . . Disponível em: https://doi.org/10.1002/nme.6781. Acesso em: 22 abr. 2025.
APA
Silva, G. A. da, Aage, N., Beck, A. T., & Sigmund, O. (2021). Local versus global stress constraint strategies in topology optimization: a comparative study. International Journal for Numerical Methods in Engineering, 1-34. doi:10.1002/nme.6781
NLM
Silva GA da, Aage N, Beck AT, Sigmund O. Local versus global stress constraint strategies in topology optimization: a comparative study [Internet]. International Journal for Numerical Methods in Engineering. 2021 ; 1-34.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6781
Vancouver
Silva GA da, Aage N, Beck AT, Sigmund O. Local versus global stress constraint strategies in topology optimization: a comparative study [Internet]. International Journal for Numerical Methods in Engineering. 2021 ; 1-34.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6781
Artigo de periodico
Robust topology optimization of compliant mechanisms with uncertainties in output stiffness (2019)
Cardoso, Eduardo Lenz; Silva, Gustavo Assis da; Beck, André Teófilo
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: TOPOLOGIA, ROBUSTEZ, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARDOSO, Eduardo Lenz e SILVA, Gustavo Assis da e BECK, André Teófilo. Robust topology optimization of compliant mechanisms with uncertainties in output stiffness. International Journal for Numerical Methods in Engineering, v. 119, n. 6, p. 532-547, 2019Tradução . . Disponível em: https://doi.org/10.1002/nme.6061. Acesso em: 22 abr. 2025.
APA
Cardoso, E. L., Silva, G. A. da, & Beck, A. T. (2019). Robust topology optimization of compliant mechanisms with uncertainties in output stiffness. International Journal for Numerical Methods in Engineering, 119( 6), 532-547. doi:10.1002/nme.6061
NLM
Cardoso EL, Silva GA da, Beck AT. Robust topology optimization of compliant mechanisms with uncertainties in output stiffness [Internet]. International Journal for Numerical Methods in Engineering. 2019 ; 119( 6): 532-547.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6061
Vancouver
Cardoso EL, Silva GA da, Beck AT. Robust topology optimization of compliant mechanisms with uncertainties in output stiffness [Internet]. International Journal for Numerical Methods in Engineering. 2019 ; 119( 6): 532-547.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6061
Artigo de periodico
Efficient and accurate stress recovery procedure and a posteriori error estimator for the stable generalized/extended finite element method (2018)
Lins, Rafael Marques; Proença, Sérgio Persival Baroncini ; Duarte, Carlos Armando Magalhães
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ERRO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LINS, Rafael Marques e PROENÇA, Sérgio Persival Baroncini e DUARTE, Carlos Armando Magalhães. Efficient and accurate stress recovery procedure and a posteriori error estimator for the stable generalized/extended finite element method. International Journal for Numerical Methods in Engineering, v. 119, n. 12, p. Se 2018, 2018Tradução . . Disponível em: https://doi.org/10.1002/nme.6091. Acesso em: 22 abr. 2025.
APA
Lins, R. M., Proença, S. P. B., & Duarte, C. A. M. (2018). Efficient and accurate stress recovery procedure and a posteriori error estimator for the stable generalized/extended finite element method. International Journal for Numerical Methods in Engineering, 119( 12), Se 2018. doi:10.1002/nme.6091
NLM
Lins RM, Proença SPB, Duarte CAM. Efficient and accurate stress recovery procedure and a posteriori error estimator for the stable generalized/extended finite element method [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 119( 12): Se 2018.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6091
Vancouver
Lins RM, Proença SPB, Duarte CAM. Efficient and accurate stress recovery procedure and a posteriori error estimator for the stable generalized/extended finite element method [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 119( 12): Se 2018.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.6091
Artigo de periodico
Level set topology optimization for design-dependent pressure load problems (2018)
Emmendoerfer Junior, Hélio ; Fancello, Eduardo Alberto ; Silva, Emílio Carlos Nelli
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: TOPOLOGIA, ALGORITMOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
EMMENDOERFER JUNIOR, Hélio e FANCELLO, Eduardo Alberto e SILVA, Emílio Carlos Nelli. Level set topology optimization for design-dependent pressure load problems. International Journal for Numerical Methods in Engineering, v. 115, n. 7, p. 825-848, 2018Tradução . . Disponível em: https://doi.org/10.1002/nme.5827. Acesso em: 22 abr. 2025.
APA
Emmendoerfer Junior, H., Fancello, E. A., & Silva, E. C. N. (2018). Level set topology optimization for design-dependent pressure load problems. International Journal for Numerical Methods in Engineering, 115( 7), 825-848. doi:10.1002/nme.5827
NLM
Emmendoerfer Junior H, Fancello EA, Silva ECN. Level set topology optimization for design-dependent pressure load problems [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 115( 7): 825-848.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5827
Vancouver
Emmendoerfer Junior H, Fancello EA, Silva ECN. Level set topology optimization for design-dependent pressure load problems [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 115( 7): 825-848.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5827
Artigo de periodico
Topology optimization of continuum structures with stress constraints and uncertainties in loading (2018)
Silva, Gustavo Assis da; Beck, André Teófilo ; Cardoso, Eduardo Lenz
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: TOPOLOGIA, FADIGA DOS MATERIAIS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Gustavo Assis da e BECK, André Teófilo e CARDOSO, Eduardo Lenz. Topology optimization of continuum structures with stress constraints and uncertainties in loading. International Journal for Numerical Methods in Engineering, v. 113, n. Ja 2018, p. 153-178, 2018Tradução . . Disponível em: https://doi.org/10.1002/nme.5607. Acesso em: 22 abr. 2025.
APA
Silva, G. A. da, Beck, A. T., & Cardoso, E. L. (2018). Topology optimization of continuum structures with stress constraints and uncertainties in loading. International Journal for Numerical Methods in Engineering, 113( Ja 2018), 153-178. doi:10.1002/nme.5607
NLM
Silva GA da, Beck AT, Cardoso EL. Topology optimization of continuum structures with stress constraints and uncertainties in loading [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 113( Ja 2018): 153-178.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5607
Vancouver
Silva GA da, Beck AT, Cardoso EL. Topology optimization of continuum structures with stress constraints and uncertainties in loading [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 113( Ja 2018): 153-178.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5607
Artigo de periodico
A topology optimization formulation for transient design of multi-entry laminated piezocomposite energy harvestingdevices coupled with electrical circuit (2018)
Salas Varela, Ruben Andres; Ramírez Fernandez, Francisco Javier ; Montealegre Rubio, Wilfredo ; Silva, Emílio Carlos Nelli ; Reddy, J. N.
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: ATUADORES PIEZELÉTRICOS, PIEZOELETRICIDADE, TOPOLOGIA, ENERGIA, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALAS VARELA, Ruben Andres et al. A topology optimization formulation for transient design of multi-entry laminated piezocomposite energy harvestingdevices coupled with electrical circuit. International Journal for Numerical Methods in Engineering, v. 113, n. 8, p. 1370-1410, 2018Tradução . . Disponível em: https://doi.org/10.1002/nme.5619. Acesso em: 22 abr. 2025.
APA
Salas Varela, R. A., Ramírez Fernandez, F. J., Montealegre Rubio, W., Silva, E. C. N., & Reddy, J. N. (2018). A topology optimization formulation for transient design of multi-entry laminated piezocomposite energy harvestingdevices coupled with electrical circuit. International Journal for Numerical Methods in Engineering, 113( 8), 1370-1410. doi:10.1002/nme.5619
NLM
Salas Varela RA, Ramírez Fernandez FJ, Montealegre Rubio W, Silva ECN, Reddy JN. A topology optimization formulation for transient design of multi-entry laminated piezocomposite energy harvestingdevices coupled with electrical circuit [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 113( 8): 1370-1410.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5619
Vancouver
Salas Varela RA, Ramírez Fernandez FJ, Montealegre Rubio W, Silva ECN, Reddy JN. A topology optimization formulation for transient design of multi-entry laminated piezocomposite energy harvestingdevices coupled with electrical circuit [Internet]. International Journal for Numerical Methods in Engineering. 2018 ; 113( 8): 1370-1410.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5619
Artigo de periodico
A new finite element for thick laminates and sandwich structures using a generalized and unified plate theory (2017)
Caliri Junior, Mauricio Francisco; Ferreira, Antonio Joaquim Mendes; Tita, Volnei
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: ESTRUTURAS, MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALIRI JUNIOR, Mauricio Francisco e FERREIRA, Antonio Joaquim Mendes e TITA, Volnei. A new finite element for thick laminates and sandwich structures using a generalized and unified plate theory. International Journal for Numerical Methods in Engineering, v. 109, n. Ja 2017, p. 290-304, 2017Tradução . . Disponível em: https://doi.org/10.1002/nme.5292. Acesso em: 22 abr. 2025.
APA
Caliri Junior, M. F., Ferreira, A. J. M., & Tita, V. (2017). A new finite element for thick laminates and sandwich structures using a generalized and unified plate theory. International Journal for Numerical Methods in Engineering, 109( Ja 2017), 290-304. doi:10.1002/nme.5292
NLM
Caliri Junior MF, Ferreira AJM, Tita V. A new finite element for thick laminates and sandwich structures using a generalized and unified plate theory [Internet]. International Journal for Numerical Methods in Engineering. 2017 ; 109( Ja 2017): 290-304.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5292
Vancouver
Caliri Junior MF, Ferreira AJM, Tita V. A new finite element for thick laminates and sandwich structures using a generalized and unified plate theory [Internet]. International Journal for Numerical Methods in Engineering. 2017 ; 109( Ja 2017): 290-304.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.5292
Artigo de periodico
Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints (2016)
Kiyono, César Yukishigue; Silva, Emílio Carlos Nelli ; Reddy, J. N.
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: FONTES ALTERNATIVAS DE ENERGIA, CONVERSÃO DE ENERGIA ELÉTRICA, ATUADORES PIEZELÉTRICOS, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KIYONO, César Yukishigue e SILVA, Emílio Carlos Nelli e REDDY, J. N. Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints. International Journal for Numerical Methods in Engineering, v. 105, n. 12, p. 883-914, 2016Tradução . . Disponível em: https://doi.org/10.1002/nme.4996. Acesso em: 22 abr. 2025.
APA
Kiyono, C. Y., Silva, E. C. N., & Reddy, J. N. (2016). Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints. International Journal for Numerical Methods in Engineering, 105( 12), 883-914. doi:10.1002/nme.4996
NLM
Kiyono CY, Silva ECN, Reddy JN. Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints [Internet]. International Journal for Numerical Methods in Engineering. 2016 ; 105( 12): 883-914.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.4996
Vancouver
Kiyono CY, Silva ECN, Reddy JN. Optimal design of laminated piezocomposite energy harvesting devices considering stress constraints [Internet]. International Journal for Numerical Methods in Engineering. 2016 ; 105( 12): 883-914.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.4996
Artigo de periodico
Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach (2012)
Kiyono, César Yukishigue; Silva, Emílio Carlos Nelli ; Reddy, J N
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: TOPOLOGIA (OTIMIZAÇÃO), ATUADORES PIEZELÉTRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KIYONO, César Yukishigue e SILVA, Emílio Carlos Nelli e REDDY, J N. Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach. International Journal for Numerical Methods in Engineering, 2012Tradução . . Disponível em: https://doi.org/10.1002/nme.3371. Acesso em: 22 abr. 2025.
APA
Kiyono, C. Y., Silva, E. C. N., & Reddy, J. N. (2012). Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.3371
NLM
Kiyono CY, Silva ECN, Reddy JN. Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach [Internet]. International Journal for Numerical Methods in Engineering. 2012 ;[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.3371
Vancouver
Kiyono CY, Silva ECN, Reddy JN. Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach [Internet]. International Journal for Numerical Methods in Engineering. 2012 ;[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.3371
Artigo de periodico
Iterative strong coupling of dimensionally heterogeneous models (2010)
Leiva, Jorge S.; Blanco, Pablo J.; Buscaglia, Gustavo Carlos
Source: International Journal for Numerical Methods in Engineering. Unidade: ICMC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MÉTODOS NUMÉRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEIVA, Jorge S. e BLANCO, Pablo J. e BUSCAGLIA, Gustavo Carlos. Iterative strong coupling of dimensionally heterogeneous models. International Journal for Numerical Methods in Engineering, v. 81, n. 12, p. 1558-1580, 2010Tradução . . Disponível em: https://doi.org/10.1002/nme.2741. Acesso em: 22 abr. 2025.
APA
Leiva, J. S., Blanco, P. J., & Buscaglia, G. C. (2010). Iterative strong coupling of dimensionally heterogeneous models. International Journal for Numerical Methods in Engineering, 81( 12), 1558-1580. doi:10.1002/nme.2741
NLM
Leiva JS, Blanco PJ, Buscaglia GC. Iterative strong coupling of dimensionally heterogeneous models [Internet]. International Journal for Numerical Methods in Engineering. 2010 ; 81( 12): 1558-1580.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2741
Vancouver
Leiva JS, Blanco PJ, Buscaglia GC. Iterative strong coupling of dimensionally heterogeneous models [Internet]. International Journal for Numerical Methods in Engineering. 2010 ; 81( 12): 1558-1580.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2741
Artigo de periodico
Multi-actuated functionally graded piezoelectric micro-tools design: a multiphysics topology optimization approach (2009)
Carbonari, Ronny Calixto ; Silva, Emílio Carlos Nelli ; Paulino, Gláucio Hermogenes
Source: International Journal for Numerical Methods in Engineering. Unidade: EP
Subjects: TOPOLOGIA (OTIMIZAÇÃO), ATUADORES PIEZELÉTRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARBONARI, Ronny Calixto e SILVA, Emílio Carlos Nelli e PAULINO, Gláucio Hermogenes. Multi-actuated functionally graded piezoelectric micro-tools design: a multiphysics topology optimization approach. International Journal for Numerical Methods in Engineering, v. 77, p. 301-336, 2009Tradução . . Disponível em: https://doi.org/10.1002/nme.2403. Acesso em: 22 abr. 2025.
APA
Carbonari, R. C., Silva, E. C. N., & Paulino, G. H. (2009). Multi-actuated functionally graded piezoelectric micro-tools design: a multiphysics topology optimization approach. International Journal for Numerical Methods in Engineering, 77, 301-336. doi:10.1002/nme.2403
NLM
Carbonari RC, Silva ECN, Paulino GH. Multi-actuated functionally graded piezoelectric micro-tools design: a multiphysics topology optimization approach [Internet]. International Journal for Numerical Methods in Engineering. 2009 ;77 301-336.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2403
Vancouver
Carbonari RC, Silva ECN, Paulino GH. Multi-actuated functionally graded piezoelectric micro-tools design: a multiphysics topology optimization approach [Internet]. International Journal for Numerical Methods in Engineering. 2009 ;77 301-336.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2403
Artigo de periodico
A discontinuous-Galerkin-based immersed boundary method (2008)
Lew, Adrián J.; Buscaglia, Gustavo Carlos
Source: International Journal for Numerical Methods in Engineering. Unidade: ICMC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MÉTODOS NUMÉRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEW, Adrián J. e BUSCAGLIA, Gustavo Carlos. A discontinuous-Galerkin-based immersed boundary method. International Journal for Numerical Methods in Engineering, v. 76, n. 4, p. 427-454, 2008Tradução . . Disponível em: https://doi.org/10.1002/nme.2312. Acesso em: 22 abr. 2025.
APA
Lew, A. J., & Buscaglia, G. C. (2008). A discontinuous-Galerkin-based immersed boundary method. International Journal for Numerical Methods in Engineering, 76( 4), 427-454. doi:10.1002/nme.2312
NLM
Lew AJ, Buscaglia GC. A discontinuous-Galerkin-based immersed boundary method [Internet]. International Journal for Numerical Methods in Engineering. 2008 ;76( 4): 427-454.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2312
Vancouver
Lew AJ, Buscaglia GC. A discontinuous-Galerkin-based immersed boundary method [Internet]. International Journal for Numerical Methods in Engineering. 2008 ;76( 4): 427-454.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.2312
Artigo de periodico
On error estimator and p-adaptivity in the generalized finite element method (2004)
Barros, Felício Bruzzi; Proença, Sérgio Persival Baroncini ; Barcellos, Clovis Sperb de
Source: International Journal for Numerical Methods in Engineering. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MECÂNICA DO DANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARROS, Felício Bruzzi e PROENÇA, Sérgio Persival Baroncini e BARCELLOS, Clovis Sperb de. On error estimator and p-adaptivity in the generalized finite element method. International Journal for Numerical Methods in Engineering, v. 60, n. 14, p. 2373-2398, 2004Tradução . . Disponível em: https://doi.org/10.1002/nme.1048. Acesso em: 22 abr. 2025.
APA
Barros, F. B., Proença, S. P. B., & Barcellos, C. S. de. (2004). On error estimator and p-adaptivity in the generalized finite element method. International Journal for Numerical Methods in Engineering, 60( 14), 2373-2398. doi:10.1002/nme.1048
NLM
Barros FB, Proença SPB, Barcellos CS de. On error estimator and p-adaptivity in the generalized finite element method [Internet]. International Journal for Numerical Methods in Engineering. 2004 ; 60( 14): 2373-2398.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.1048
Vancouver
Barros FB, Proença SPB, Barcellos CS de. On error estimator and p-adaptivity in the generalized finite element method [Internet]. International Journal for Numerical Methods in Engineering. 2004 ; 60( 14): 2373-2398.[citado 2025 abr. 22 ] Available from: https://doi.org/10.1002/nme.1048

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration