ReP USP - Resultado da busca

Artigo de periodico
Internal damping ratio of normal- and high-strength concrete considering mechanical damage evolution (2024)
Gidrão, Gustavo de Miranda Saleme; Krahl, Pablo Augusto; Bosse, Rúbia Mara; Silvestro, Laura; Ribeiro, Rodrigo S.; Lima, Geannina Terezinha dos Santos; Carrazedo, Ricardo
Source: Buildings. Unidade: EESC
Subjects: DANOS MECÂNICOS, CONCRETO DE ALTA RESISTÊNCIA, ACÚSTICA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GIDRÃO, Gustavo de Miranda Saleme et al. Internal damping ratio of normal- and high-strength concrete considering mechanical damage evolution. Buildings, v. 14, n. 8, p. 1-17, 2024Tradução . . Disponível em: https://dx.doi.org/10.3390/buildings14082446. Acesso em: 16 maio 2025.
APA
Gidrão, G. de M. S., Krahl, P. A., Bosse, R. M., Silvestro, L., Ribeiro, R. S., Lima, G. T. dos S., & Carrazedo, R. (2024). Internal damping ratio of normal- and high-strength concrete considering mechanical damage evolution. Buildings, 14( 8), 1-17. doi:10.3390/buildings14082446
NLM
Gidrão G de MS, Krahl PA, Bosse RM, Silvestro L, Ribeiro RS, Lima GT dos S, Carrazedo R. Internal damping ratio of normal- and high-strength concrete considering mechanical damage evolution [Internet]. Buildings. 2024 ; 14( 8): 1-17.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings14082446
Vancouver
Gidrão G de MS, Krahl PA, Bosse RM, Silvestro L, Ribeiro RS, Lima GT dos S, Carrazedo R. Internal damping ratio of normal- and high-strength concrete considering mechanical damage evolution [Internet]. Buildings. 2024 ; 14( 8): 1-17.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings14082446
Artigo de periodico
Investigation of a Building with Male and Female Residents to Achieve Equality of Thermal Sensation Associated with Rational Use of Exergy and Energy (2024)
Molliet, Débora Silva ; Mady, Carlos Eduardo Keutenedjian
Source: Buildings. Unidade: IEE
Assunto: EFICIÊNCIA ENERGÉTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOLLIET, Débora Silva e MADY, Carlos Eduardo Keutenedjian. Investigation of a Building with Male and Female Residents to Achieve Equality of Thermal Sensation Associated with Rational Use of Exergy and Energy. Buildings, v. 14, n. 4, p. 1149/1-22, 2024Tradução . . Disponível em: https://doi.org/10.3390/buildings14041149. Acesso em: 16 maio 2025.
APA
Molliet, D. S., & Mady, C. E. K. (2024). Investigation of a Building with Male and Female Residents to Achieve Equality of Thermal Sensation Associated with Rational Use of Exergy and Energy. Buildings, 14( 4), 1149/1-22. doi:10.3390/buildings14041149
NLM
Molliet DS, Mady CEK. Investigation of a Building with Male and Female Residents to Achieve Equality of Thermal Sensation Associated with Rational Use of Exergy and Energy [Internet]. Buildings. 2024 ;14( 4): 1149/1-22.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14041149
Vancouver
Molliet DS, Mady CEK. Investigation of a Building with Male and Female Residents to Achieve Equality of Thermal Sensation Associated with Rational Use of Exergy and Energy [Internet]. Buildings. 2024 ;14( 4): 1149/1-22.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14041149
Artigo de periodico
The use of sargasso seaweed as lignocellulosic material for particleboards: technical viability and life cycle assessment (2024)
Duran, Afonso José Felício Peres ; Lyra, Gabriela Pitolli ; Campos Filho, Luiz Eduardo; Bueno, Cristiane ; Rossignolo, João Adriano ; Alves-Lima, Cicero ; Fiorelli, Juliano
Source: Buildings. Unidade: FZEA
Subjects: BIOMASSA, BAGAÇOS, CANA-DE-AÇÚCAR, PAINÉIS, MATERIAIS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DURAN, Afonso José Felício Peres et al. The use of sargasso seaweed as lignocellulosic material for particleboards: technical viability and life cycle assessment. Buildings, v. 14, n. 5, p. 1-18, 2024Tradução . . Disponível em: https://doi.org/10.3390/buildings14051403. Acesso em: 16 maio 2025.
APA
Duran, A. J. F. P., Lyra, G. P., Campos Filho, L. E., Bueno, C., Rossignolo, J. A., Alves-Lima, C., & Fiorelli, J. (2024). The use of sargasso seaweed as lignocellulosic material for particleboards: technical viability and life cycle assessment. Buildings, 14( 5), 1-18. doi:10.3390/buildings14051403
NLM
Duran AJFP, Lyra GP, Campos Filho LE, Bueno C, Rossignolo JA, Alves-Lima C, Fiorelli J. The use of sargasso seaweed as lignocellulosic material for particleboards: technical viability and life cycle assessment [Internet]. Buildings. 2024 ; 14( 5): 1-18.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14051403
Vancouver
Duran AJFP, Lyra GP, Campos Filho LE, Bueno C, Rossignolo JA, Alves-Lima C, Fiorelli J. The use of sargasso seaweed as lignocellulosic material for particleboards: technical viability and life cycle assessment [Internet]. Buildings. 2024 ; 14( 5): 1-18.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14051403
Artigo de periodico
Production of glass foam in a microwave oven using agro-industrial waste as raw material (2024)
Fernandes, Fernando Antônio ; Fernandes, Thamara Fernanda da Silva; Rossignolo, João Adriano
Source: Buildings. Unidade: FZEA
Subjects: ECONOMIA CIRCULAR, RESÍDUOS AGRÍCOLAS, SUSTENTABILIDADE, VIDRO, CONCRETO LEVE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Fernando Antônio e FERNANDES, Thamara Fernanda da Silva e ROSSIGNOLO, João Adriano. Production of glass foam in a microwave oven using agro-industrial waste as raw material. Buildings, v. 14, n. 6, p. 1-17, 2024Tradução . . Disponível em: https://doi.org/10.3390/buildings14061643. Acesso em: 16 maio 2025.
APA
Fernandes, F. A., Fernandes, T. F. da S., & Rossignolo, J. A. (2024). Production of glass foam in a microwave oven using agro-industrial waste as raw material. Buildings, 14( 6), 1-17. doi:10.3390/buildings14061643
NLM
Fernandes FA, Fernandes TF da S, Rossignolo JA. Production of glass foam in a microwave oven using agro-industrial waste as raw material [Internet]. Buildings. 2024 ; 14( 6): 1-17.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14061643
Vancouver
Fernandes FA, Fernandes TF da S, Rossignolo JA. Production of glass foam in a microwave oven using agro-industrial waste as raw material [Internet]. Buildings. 2024 ; 14( 6): 1-17.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings14061643
Artigo de periodico
Numerical evaluation of the influence of using carbon-fiber-reinforced polymer rebars as shear connectors for cross-laminated timber–concrete panels (2024)
Alves, Larissa Fé; Pessoa, Poliana de Melo; Jardim, Pedro Ignacio Lima Gadêlha; Faustino, Emerson; Santos, Herisson Ferreira dos; Lahr, Francisco Antonio Rocco ; Almeida, Diego Henrique de; Christoforo, André Luis
Source: Buildings. Unidade: EESC
Subjects: CONCRETO, CISALHAMENTO, MATERIAIS COMPÓSITOS DE FIBRAS, POLÍMEROS (MATERIAIS), ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Larissa Fé et al. Numerical evaluation of the influence of using carbon-fiber-reinforced polymer rebars as shear connectors for cross-laminated timber–concrete panels. Buildings, v. 14, n. 7, p. 1-23, 2024Tradução . . Disponível em: https://dx.doi.org/10.3390/buildings14072178. Acesso em: 16 maio 2025.
APA
Alves, L. F., Pessoa, P. de M., Jardim, P. I. L. G., Faustino, E., Santos, H. F. dos, Lahr, F. A. R., et al. (2024). Numerical evaluation of the influence of using carbon-fiber-reinforced polymer rebars as shear connectors for cross-laminated timber–concrete panels. Buildings, 14( 7), 1-23. doi:10.3390/buildings14072178
NLM
Alves LF, Pessoa P de M, Jardim PILG, Faustino E, Santos HF dos, Lahr FAR, Almeida DH de, Christoforo AL. Numerical evaluation of the influence of using carbon-fiber-reinforced polymer rebars as shear connectors for cross-laminated timber–concrete panels [Internet]. Buildings. 2024 ; 14( 7): 1-23.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings14072178
Vancouver
Alves LF, Pessoa P de M, Jardim PILG, Faustino E, Santos HF dos, Lahr FAR, Almeida DH de, Christoforo AL. Numerical evaluation of the influence of using carbon-fiber-reinforced polymer rebars as shear connectors for cross-laminated timber–concrete panels [Internet]. Buildings. 2024 ; 14( 7): 1-23.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings14072178
Artigo de periodico
Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm (2023)
Moraes, Matheus Henrique Morato de ; Fraga, Iuri Fazolin; Menezes, Isabella Silva ; Lahr, Francisco Antonio Rocco ; Panzera, Túlio Hallak ; Freire, Rodrigo Teixeira Santos; Dias, Alfredo Manuel Pereira Geraldes ; Santos, Herisson Ferreira dos; Faustino, Emerson; Pereira Junior, Wanderlei Malaquias; Christoforo, André Luis
Source: Buildings. Unidade: EESC
Subjects: TRELIÇAS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Matheus Henrique Morato de et al. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, v. 13, n. 8, p. 1-36, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13081946. Acesso em: 16 maio 2025.
APA
Moraes, M. H. M. de, Fraga, I. F., Menezes, I. S., Lahr, F. A. R., Panzera, T. H., Freire, R. T. S., et al. (2023). Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, 13( 8), 1-36. doi:10.3390/buildings13081946
NLM
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13081946
Vancouver
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13081946
Artigo de periodico
Required changes to unlock value generation through implementing BIM and IoT for Universities FM Services (2023)
Fialho, Beatriz de Castro; Fabricio, Márcio Minto ; Codinhoto, Ricardo
Source: Buildings. Unidade: IAU
Subjects: BIM, INTERNET DAS COISAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FIALHO, Beatriz de Castro e FABRICIO, Márcio Minto e CODINHOTO, Ricardo. Required changes to unlock value generation through implementing BIM and IoT for Universities FM Services. Buildings, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13092150. Acesso em: 16 maio 2025.
APA
Fialho, B. de C., Fabricio, M. M., & Codinhoto, R. (2023). Required changes to unlock value generation through implementing BIM and IoT for Universities FM Services. Buildings. doi:10.3390/buildings13092150
NLM
Fialho B de C, Fabricio MM, Codinhoto R. Required changes to unlock value generation through implementing BIM and IoT for Universities FM Services [Internet]. Buildings. 2023 ;[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13092150
Vancouver
Fialho B de C, Fabricio MM, Codinhoto R. Required changes to unlock value generation through implementing BIM and IoT for Universities FM Services [Internet]. Buildings. 2023 ;[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13092150
Artigo de periodico
Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models (2023)
Neuberger, Ygor Moriel; Andrade, Maykon Vinicius; Sousa, Alex Micael Dantas de ; Bandieira, Mariana; Silva Junior, Edivaldo Pereira; Santos, Herisson Ferreira dos; Catoia, Bruna; Bolandim, Emerson Alexandro; Aquino, Vinicius Borges de Moura; Christoforo, André Luis ; Ferreira, Marcelo de Araújo
Source: Buildings. Unidade: EESC
Subjects: ANÁLISE NUMÉRICA, CONCRETO ARMADO, PLASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NEUBERGER, Ygor Moriel et al. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models. Buildings, v. 13, n. 11, p. 1-21, 2023Tradução . . Disponível em: https://dx.doi.org/10.3390/buildings1311278120. Acesso em: 16 maio 2025.
APA
Neuberger, Y. M., Andrade, M. V., Sousa, A. M. D. de, Bandieira, M., Silva Junior, E. P., Santos, H. F. dos, et al. (2023). Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models. Buildings, 13( 11), 1-21. doi:10.3390/buildings13112781
NLM
Neuberger YM, Andrade MV, Sousa AMD de, Bandieira M, Silva Junior EP, Santos HF dos, Catoia B, Bolandim EA, Aquino VB de M, Christoforo AL, Ferreira M de A. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models [Internet]. Buildings. 2023 ; 13( 11): 1-21.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings1311278120
Vancouver
Neuberger YM, Andrade MV, Sousa AMD de, Bandieira M, Silva Junior EP, Santos HF dos, Catoia B, Bolandim EA, Aquino VB de M, Christoforo AL, Ferreira M de A. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models [Internet]. Buildings. 2023 ; 13( 11): 1-21.[citado 2025 maio 16 ] Available from: https://dx.doi.org/10.3390/buildings1311278120
Artigo de periodico
Experimental investigation on interfacial defect detection for SCCS with different contact NDT technical (2023)
Fernandes, Fernando Antônio ; Barbar, Joseph Salem; Costa, Dayriane do Socorro de Oliveira; Rossignolo, João Adriano
Source: Buildings. Unidade: FZEA
Subjects: CONCRETO LEVE, MICROTOMOGRAFIA, CONCRETO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Fernando Antônio et al. Experimental investigation on interfacial defect detection for SCCS with different contact NDT technical. Buildings, v. 13, n. 10, p. 1-16, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13102549. Acesso em: 16 maio 2025.
APA
Fernandes, F. A., Barbar, J. S., Costa, D. do S. de O., & Rossignolo, J. A. (2023). Experimental investigation on interfacial defect detection for SCCS with different contact NDT technical. Buildings, 13( 10), 1-16. doi:10.3390/buildings13102549
NLM
Fernandes FA, Barbar JS, Costa D do S de O, Rossignolo JA. Experimental investigation on interfacial defect detection for SCCS with different contact NDT technical [Internet]. Buildings. 2023 ; 13( 10): 1-16.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13102549
Vancouver
Fernandes FA, Barbar JS, Costa D do S de O, Rossignolo JA. Experimental investigation on interfacial defect detection for SCCS with different contact NDT technical [Internet]. Buildings. 2023 ; 13( 10): 1-16.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13102549
Artigo de periodico
NLFEA of reinforced concrete corbels: proposed framework, sensibility study, and precision level (2023)
Reginato, Luan ; Sousa, Alex Micael Dantas de ; Santos, João Vitor Caldas; El Debs, Mounir Khalil
Source: Buildings. Unidade: EESC
Subjects: CONCRETO ARMADO, MÉTODO DOS ELEMENTOS FINITOS, ANÁLISE NÃO LINEAR DE ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REGINATO, Luan et al. NLFEA of reinforced concrete corbels: proposed framework, sensibility study, and precision level. Buildings, v. 13, n. 7, p. 1-33, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13071874. Acesso em: 16 maio 2025.
APA
Reginato, L., Sousa, A. M. D. de, Santos, J. V. C., & El Debs, M. K. (2023). NLFEA of reinforced concrete corbels: proposed framework, sensibility study, and precision level. Buildings, 13( 7), 1-33. doi:10.3390/buildings13071874
NLM
Reginato L, Sousa AMD de, Santos JVC, El Debs MK. NLFEA of reinforced concrete corbels: proposed framework, sensibility study, and precision level [Internet]. Buildings. 2023 ; 13( 7): 1-33.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13071874
Vancouver
Reginato L, Sousa AMD de, Santos JVC, El Debs MK. NLFEA of reinforced concrete corbels: proposed framework, sensibility study, and precision level [Internet]. Buildings. 2023 ; 13( 7): 1-33.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13071874
Artigo de periodico
Influence of opening type in axially compressed castellated columns (2023)
Gomes, Arthur Filipe Freire ; Mesquita, Leonardo C; Rodrigues, Edson Fernando Castanheira ; Arroyo, Felipe Nascimento ; Aquino, Vinicius Borges de Moura ; Santos, Herisson Ferreira dos; Panzera, Túlio Hallak ; Lahr, Francisco Antonio Rocco ; Chahud, Eduardo; Branco, Luis A. M. N.; Christoforo, André Luis
Source: Buildings. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, PILARES, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GOMES, Arthur Filipe Freire et al. Influence of opening type in axially compressed castellated columns. Buildings, v. 13, n. 7, p. 1-20, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13071851. Acesso em: 16 maio 2025.
APA
Gomes, A. F. F., Mesquita, L. C., Rodrigues, E. F. C., Arroyo, F. N., Aquino, V. B. de M., Santos, H. F. dos, et al. (2023). Influence of opening type in axially compressed castellated columns. Buildings, 13( 7), 1-20. doi:10.3390/buildings13071851
NLM
Gomes AFF, Mesquita LC, Rodrigues EFC, Arroyo FN, Aquino VB de M, Santos HF dos, Panzera TH, Lahr FAR, Chahud E, Branco LAMN, Christoforo AL. Influence of opening type in axially compressed castellated columns [Internet]. Buildings. 2023 ; 13( 7): 1-20.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13071851
Vancouver
Gomes AFF, Mesquita LC, Rodrigues EFC, Arroyo FN, Aquino VB de M, Santos HF dos, Panzera TH, Lahr FAR, Chahud E, Branco LAMN, Christoforo AL. Influence of opening type in axially compressed castellated columns [Internet]. Buildings. 2023 ; 13( 7): 1-20.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13071851
Artigo de periodico
Timber construction regulations in Brazil: a perspective from its national industry of timber houses (2023)
Araujo, Victor de ; Vasconcelos, Juliano; Morales, Elen; Barbosa, Juliana; Gava, Maristela; Faustino, Emerson ; Santos, Herisson; Arroyo, Felipe ; Serra, Sheyla ; Paliari, José ; Christoforo, André ; Lahr, Francisco Antonio Rocco ; Garcia, José Nivaldo
Source: Buildings. Unidades: EESC, ESALQ
Subjects: CÓDIGO DE OBRAS, CASAS DE MADEIRA, CONSTRUÇÕES DE MADEIRA, INDÚSTRIA MADEIREIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Victor de et al. Timber construction regulations in Brazil: a perspective from its national industry of timber houses. Buildings, v. 13, p. 1-15, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13092136. Acesso em: 16 maio 2025.
APA
Araujo, V. de, Vasconcelos, J., Morales, E., Barbosa, J., Gava, M., Faustino, E., et al. (2023). Timber construction regulations in Brazil: a perspective from its national industry of timber houses. Buildings, 13, 1-15. doi:10.3390/buildings13092136
NLM
Araujo V de, Vasconcelos J, Morales E, Barbosa J, Gava M, Faustino E, Santos H, Arroyo F, Serra S, Paliari J, Christoforo A, Lahr FAR, Garcia JN. Timber construction regulations in Brazil: a perspective from its national industry of timber houses [Internet]. Buildings. 2023 ; 13 1-15.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13092136
Vancouver
Araujo V de, Vasconcelos J, Morales E, Barbosa J, Gava M, Faustino E, Santos H, Arroyo F, Serra S, Paliari J, Christoforo A, Lahr FAR, Garcia JN. Timber construction regulations in Brazil: a perspective from its national industry of timber houses [Internet]. Buildings. 2023 ; 13 1-15.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13092136
Artigo de periodico
Viscoelastic soil–structure interaction procedure for building on footing foundations considering consolidation settlements (2023)
Lanes, Ricardo Morais ; Greco, Marcelo ; Almeida, Valério da Silva
Source: Buildings. Unidade: EP
Subjects: INTERAÇÃO SOLO-ESTRUTURA, VISCOELASTICIDADE DAS ESTRUTURAS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LANES, Ricardo Morais e GRECO, Marcelo e ALMEIDA, Valério da Silva. Viscoelastic soil–structure interaction procedure for building on footing foundations considering consolidation settlements. Buildings, v. 13, n. 3, p. 18 on-line, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13030813. Acesso em: 16 maio 2025.
APA
Lanes, R. M., Greco, M., & Almeida, V. da S. (2023). Viscoelastic soil–structure interaction procedure for building on footing foundations considering consolidation settlements. Buildings, 13( 3), 18 on-line. doi:10.3390/buildings13030813
NLM
Lanes RM, Greco M, Almeida V da S. Viscoelastic soil–structure interaction procedure for building on footing foundations considering consolidation settlements [Internet]. Buildings. 2023 ; 13( 3): 18 on-line.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13030813
Vancouver
Lanes RM, Greco M, Almeida V da S. Viscoelastic soil–structure interaction procedure for building on footing foundations considering consolidation settlements [Internet]. Buildings. 2023 ; 13( 3): 18 on-line.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13030813
Artigo de periodico
A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis (2023)
Felix, Emerson Felipe; Falcão, Isabela da Silva; Santos, Larissa Gabriela dos; Carrazedo, Rogério ; Possan, Edna
Source: Buildings. Unidade: EESC
Subjects: MÉTODO DE MONTE CARLO, ESTRUTURAS DE CONCRETO ARMADO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELIX, Emerson Felipe et al. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis. Buildings, v. 13, n. 4, p. 1-21, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13040993. Acesso em: 16 maio 2025.
APA
Felix, E. F., Falcão, I. da S., Santos, L. G. dos, Carrazedo, R., & Possan, E. (2023). A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis. Buildings, 13( 4), 1-21. doi:10.3390/buildings13040993
NLM
Felix EF, Falcão I da S, Santos LG dos, Carrazedo R, Possan E. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis [Internet]. Buildings. 2023 ; 13( 4): 1-21.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13040993
Vancouver
Felix EF, Falcão I da S, Santos LG dos, Carrazedo R, Possan E. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis [Internet]. Buildings. 2023 ; 13( 4): 1-21.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13040993
Artigo de periodico
Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms (2023)
Sousa, Alex Micael Dantas de ; Lantsoght, Eva Olivia Leontien; El Debs, Mounir Khalil
Source: Buildings. Unidade: EESC
Subjects: ESTRUTURAS, CISALHAMENTO, LAJES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA, Alex Micael Dantas de e LANTSOGHT, Eva Olivia Leontien e EL DEBS, Mounir Khalil. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms. Buildings, v. 13, n. 2, p. 1-28, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13020434. Acesso em: 16 maio 2025.
APA
Sousa, A. M. D. de, Lantsoght, E. O. L., & El Debs, M. K. (2023). Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms. Buildings, 13( 2), 1-28. doi:10.3390/buildings13020434
NLM
Sousa AMD de, Lantsoght EOL, El Debs MK. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms [Internet]. Buildings. 2023 ; 13( 2): 1-28.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13020434
Vancouver
Sousa AMD de, Lantsoght EOL, El Debs MK. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms [Internet]. Buildings. 2023 ; 13( 2): 1-28.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings13020434
Artigo de periodico
Development of a BIM and IoT-based smart lighting maintenance system prototype for universities’ FM sector (2022)
Fialho, Beatriz Campos ; Codinhoto, Ricardo ; Fabricio, Márcio Minto ; Estrella, Júlio Cezar ; Ribeiro, Cairo Mateus Neves; Bueno, Julio Mendonça dos Santos; Torrezan, João Pedro Doimo
Source: Buildings. Unidades: IAU, ICMC, EESC E ICMC
Subjects: INTERNET DAS COISAS, COLETA DE DADOS, AUTOMAÇÃO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FIALHO, Beatriz Campos et al. Development of a BIM and IoT-based smart lighting maintenance system prototype for universities’ FM sector. Buildings, v. 12, n. 2, p. 1-31, 2022Tradução . . Disponível em: https://doi.org/10.3390/buildings12020099. Acesso em: 16 maio 2025.
APA
Fialho, B. C., Codinhoto, R., Fabricio, M. M., Estrella, J. C., Ribeiro, C. M. N., Bueno, J. M. dos S., & Torrezan, J. P. D. (2022). Development of a BIM and IoT-based smart lighting maintenance system prototype for universities’ FM sector. Buildings, 12( 2), 1-31. doi:10.3390/buildings12020099
NLM
Fialho BC, Codinhoto R, Fabricio MM, Estrella JC, Ribeiro CMN, Bueno JM dos S, Torrezan JPD. Development of a BIM and IoT-based smart lighting maintenance system prototype for universities’ FM sector [Internet]. Buildings. 2022 ; 12( 2): 1-31.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings12020099
Vancouver
Fialho BC, Codinhoto R, Fabricio MM, Estrella JC, Ribeiro CMN, Bueno JM dos S, Torrezan JPD. Development of a BIM and IoT-based smart lighting maintenance system prototype for universities’ FM sector [Internet]. Buildings. 2022 ; 12( 2): 1-31.[citado 2025 maio 16 ] Available from: https://doi.org/10.3390/buildings12020099

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Subjects

Funding Agencies

Non normalized affiliation