Menu

Filtros : "Wear" Removidos: "ENSAIOS DOS MATERIAIS" "Centro Universitário FEI, São Bernardo do Campo" "Seriacopi, Vanessa" "TSCHIPTSCHIN, ANDRE PAULO" Limpar

Filtros

Refine with date range

1 - 20 (49 records)

  • Artigo de periodico

    Scaling-up laser cladding of rails (2024)

    Yildirimli, K.; Pereira, h Boschetti; Pereira, H. Boschetti; Goldenstein, Hélio ; Fletcher, D. I.; Lee, Z. S.; Lewis, R

    Source: Wear.

    Subjects: REVESTIMENTOS, TRILHOS, FERROVIAS, DESGASTE

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      YILDIRIMLI, K. et al. Scaling-up laser cladding of rails. Wear, v. 540-541, p. 15 205227, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.205227. Acesso em: 07 set. 2024.

    • APA

      Yildirimli, K., Pereira, h B., Pereira, H. B., Goldenstein, H., Fletcher, D. I., Lee, Z. S., & Lewis, R. (2024). Scaling-up laser cladding of rails. Wear, 540-541, 15 205227. doi:10.1016/j.wear.2023.205227

    • NLM

      Yildirimli K, Pereira h B, Pereira HB, Goldenstein H, Fletcher DI, Lee ZS, Lewis R. Scaling-up laser cladding of rails [Internet]. Wear. 2024 ; 540-541 15 205227.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2023.205227

    • Vancouver

      Yildirimli K, Pereira h B, Pereira HB, Goldenstein H, Fletcher DI, Lee ZS, Lewis R. Scaling-up laser cladding of rails [Internet]. Wear. 2024 ; 540-541 15 205227.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2023.205227

  • Artigo de periodico

    Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys (2023)

    Paula, Angel Felipe Magnossão; Borges, Doris Feijó Leão; Silva, Felipe Carneiro da ; Rossino, Luciana Sgarbi; Manfrinato, Marcos Dorigão ; Verma, Vikas; Luna-Domínguez, Jorge Humberto; Magnabosco, Rodrigo ; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, ABRASÃO, TRIBOLOGIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAULA, Angel Felipe Magnossão et al. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, v. 524-525, p. 16 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204867. Acesso em: 07 set. 2024.

    • APA

      Paula, A. F. M., Borges, D. F. L., Silva, F. C. da, Rossino, L. S., Manfrinato, M. D., Verma, V., et al. (2023). Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, 524-525, 16 . doi:10.1016/j.wear.2023.204867

    • NLM

      Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2023.204867

    • Vancouver

      Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2023.204867

  • Artigo de periodico

    Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis (2022)

    Pereira, Henrique Boschetti ; Alves, Luiz Henrique Dias ; Rezende, Andrei Bavaresco ; Mei, Paulo Roberto ; Goldenstein, Hélio

    Source: Wear. Unidade: EP

    Subjects: FADIGA DOS MATERIAIS, FERROVIAS, AÇO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PEREIRA, Henrique Boschetti et al. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, v. 498-499, n. Ju, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2022.204299. Acesso em: 07 set. 2024.

    • APA

      Pereira, H. B., Alves, L. H. D., Rezende, A. B., Mei, P. R., & Goldenstein, H. (2022). Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, 498-499( Ju), 11 . doi:10.1016/j.wear.2022.204299

    • NLM

      Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2022.204299

    • Vancouver

      Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2022.204299

  • Artigo de periodico

    Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” (2021)

    Macedo, Marcelo de Matos; Luna-Domínguez, Jorge Humberto; Verma, Vikas; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara

    Source: Wear. Unidade: EP

    Subjects: AÇO FERRAMENTA, DESGASTE ABRASIVO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MACEDO, Marcelo de Matos et al. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, v. 476, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2021.203664. Acesso em: 07 set. 2024.

    • APA

      Macedo, M. de M., Luna-Domínguez, J. H., Verma, V., Schön, C. G., & Cozza, R. C. (2021). Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, 476. doi:10.1016/j.wear.2021.203664

    • NLM

      Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2021.203664

    • Vancouver

      Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2021.203664

  • Artigo de periodico

    A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting (2020)

    Arab, Paola Bruno; Celestino, Tarcísio Barreto

    Source: Wear. Unidade: EESC

    Subjects: ABRASÃO, PETROGRAFIA, GEOTECNIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ARAB, Paola Bruno e CELESTINO, Tarcísio Barreto. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting. Wear, v. 448-449, p. 1-8, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203210. Acesso em: 07 set. 2024.

    • APA

      Arab, P. B., & Celestino, T. B. (2020). A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting. Wear, 448-449, 1-8. doi:10.1016/j.wear.2020.203210

    • NLM

      Arab PB, Celestino TB. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting [Internet]. Wear. 2020 ; 448-449 1-8.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2020.203210

    • Vancouver

      Arab PB, Celestino TB. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting [Internet]. Wear. 2020 ; 448-449 1-8.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2020.203210

  • Artigo de periodico

    Improvement in the wear resistance of a hypereutectoid rail via heat treatment (2020)

    Tressia, Gustavo; Sinatora, Amilton ; Goldenstein, Hélio ; Masoumi, Mohammad

    Source: Wear. Unidade: EP

    Subjects: DESGASTE, FADIGA DAS ESTRUTURAS, FERROVIAS, AÇO, TRILHOS, TRATAMENTO TÉRMICO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      TRESSIA, Gustavo et al. Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, v. 442–443, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.203122. Acesso em: 07 set. 2024.

    • APA

      Tressia, G., Sinatora, A., Goldenstein, H., & Masoumi, M. (2020). Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, 442–443. doi:10.1016/j.wear.2019.203122

    • NLM

      Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2019.203122

    • Vancouver

      Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2019.203122

  • Artigo de periodico

    Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time (2020)

    Calderon-Hernández, José Wilmar ; Sinatora, Amilton ; Melo, Hercílio Gomes de ; Chaves, Arthur Pinto ; Mano, Eliana Satiko ; Leal Filho, Laurindo de Salles ; Paiva, José Luís de ; Braga, André Soares; Pinto, Thiago César de Souza

    Source: Wear. Unidade: EP

    Subjects: MINÉRIOS, EROSÃO, CORROSÃO, DESGASTE DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CALDERON-HERNÁNDEZ, José Wilmar et al. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, v. 450–451, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203272. Acesso em: 07 set. 2024.

    • APA

      Calderon-Hernández, J. W., Sinatora, A., Melo, H. G. de, Chaves, A. P., Mano, E. S., Leal Filho, L. de S., et al. (2020). Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, 450–451, 1-13. doi:10.1016/j.wear.2020.203272

    • NLM

      Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2020.203272

    • Vancouver

      Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2020.203272

  • Artigo de periodico

    Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials (2019)

    Almeida, Leandro Prates Ferreira de ; Falqueto, Leandro Entringer ; Goldenstein, Hélio ; Bozzi, Antonio Cesar ; Scandian, Cherlio

    Source: Wear. Unidade: EP

    Subjects: DESGASTE, ATRITO, FRICÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ALMEIDA, Leandro Prates Ferreira de et al. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, v. 432-433, p. 1-10, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.05.009. Acesso em: 07 set. 2024.

    • APA

      Almeida, L. P. F. de, Falqueto, L. E., Goldenstein, H., Bozzi, A. C., & Scandian, C. (2019). Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, 432-433, 1-10. doi:10.1016/j.wear.2019.05.009

    • NLM

      Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009

    • Vancouver

      Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009

  • Artigo de periodico

    The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel (2017)

    Machado, P. C; Pereira, J I; Penagos, Jose Jimmy; Yonamine, Taeko; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, AÇO INOXIDÁVEL

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MACHADO, P. C et al. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel. Wear, v. 376–377, p. 1064-1073, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2016.12.057. Acesso em: 07 set. 2024.

    • APA

      Machado, P. C., Pereira, J. I., Penagos, J. J., Yonamine, T., & Sinatora, A. (2017). The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel. Wear, 376–377, 1064-1073. doi:10.1016/j.wear.2016.12.057

    • NLM

      Machado PC, Pereira JI, Penagos JJ, Yonamine T, Sinatora A. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel [Internet]. Wear. 2017 ; 376–377 1064-1073.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2016.12.057

    • Vancouver

      Machado PC, Pereira JI, Penagos JJ, Yonamine T, Sinatora A. The effect of in-service work hardening and crystallographic orientation on the micro-scratch wear of hadfield steel [Internet]. Wear. 2017 ; 376–377 1064-1073.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2016.12.057

  • Artigo de periodico

    Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons (2017)

    Penagos, Jose Jimmy; Pereira, J I; Machado, P. C; Albertin, Eduardo ; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, NIÓBIO, AÇO FUNDIDO, RESISTÊNCIA DOS MATERIAIS, FERRO FUNDIDO

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PENAGOS, Jose Jimmy et al. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons. Wear, v. 376–377, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.103. Acesso em: 07 set. 2024.

    • APA

      Penagos, J. J., Pereira, J. I., Machado, P. C., Albertin, E., & Sinatora, A. (2017). Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons. Wear, 376–377. doi:10.1016/j.wear.2017.01.103

    • NLM

      Penagos JJ, Pereira JI, Machado PC, Albertin E, Sinatora A. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons [Internet]. Wear. 2017 ; 376–377[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.103

    • Vancouver

      Penagos JJ, Pereira JI, Machado PC, Albertin E, Sinatora A. Synergetic effect of niobium and molybdenum on abrasion resistance of high chromium cast irons [Internet]. Wear. 2017 ; 376–377[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.103

  • Artigo de periodico

    Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners (2017)

    Pereira, J I; Machado, P. C; Penagos, Jose Jimmy; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PEREIRA, J I et al. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners. Wear, v. 376-377, p. 37-45, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.094. Acesso em: 07 set. 2024.

    • APA

      Pereira, J. I., Machado, P. C., Penagos, J. J., & Sinatora, A. (2017). Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners. Wear, 376-377, 37-45. doi:10.1016/j.wear.2017.01.094

    • NLM

      Pereira JI, Machado PC, Penagos JJ, Sinatora A. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners [Internet]. Wear. 2017 ; 376-377 37-45.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.094

    • Vancouver

      Pereira JI, Machado PC, Penagos JJ, Sinatora A. Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners [Internet]. Wear. 2017 ; 376-377 37-45.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.094

  • Artigo de periodico

    Quantification of folded metal in cylinder bores through surface relocation (2017)

    Obara, Rafael Brisolla ; Souza, Roberto Martins de ; Tomanik, E

    Source: Wear. Unidade: EP

    Subjects: DESGASTE DOS MATERIAIS, RESISTÊNCIA DOS MATERIAIS, DOBRADURA DE METAIS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OBARA, Rafael Brisolla e SOUZA, Roberto Martins de e TOMANIK, E. Quantification of folded metal in cylinder bores through surface relocation. Wear, v. 384-385, p. 142-150, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.05.016. Acesso em: 07 set. 2024.

    • APA

      Obara, R. B., Souza, R. M. de, & Tomanik, E. (2017). Quantification of folded metal in cylinder bores through surface relocation. Wear, 384-385, 142-150. doi:10.1016/j.wear.2017.05.016

    • NLM

      Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016

    • Vancouver

      Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016

  • Artigo de periodico

    Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials (2017)

    Franco, Luiz Alberto ; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, AÇO FUNDIDO, FERRO FUNDIDO CINZENTO

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FRANCO, Luiz Alberto e SINATORA, Amilton. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, v. 382-383, p. 51-61, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.04.006. Acesso em: 07 set. 2024.

    • APA

      Franco, L. A., & Sinatora, A. (2017). Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, 382-383, 51-61. doi:10.1016/j.wear.2017.04.006

    • NLM

      Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006

    • Vancouver

      Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006

  • Artigo de periodico

    Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels (2017)

    Tressia, G; Penagos, Jose Jimmy; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, AÇO INOXIDÁVEL

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      TRESSIA, G e PENAGOS, Jose Jimmy e SINATORA, Amilton. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels. Wear, v. 376–377, p. 63-69, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.073. Acesso em: 07 set. 2024.

    • APA

      Tressia, G., Penagos, J. J., & Sinatora, A. (2017). Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels. Wear, 376–377, 63-69. doi:10.1016/j.wear.2017.01.073

    • NLM

      Tressia G, Penagos JJ, Sinatora A. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels [Internet]. Wear. 2017 ; 376–377 63-69.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.073

    • Vancouver

      Tressia G, Penagos JJ, Sinatora A. Effect of abrasive particle size on slurry abrasion resistance of austenitic and martensitic steels [Internet]. Wear. 2017 ; 376–377 63-69.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2017.01.073

  • Artigo de periodico

    Quantification of cylinder bores almost 'zero-wear' (2016)

    Obara, R B; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, MOTORES DE COMBUSTÃO INTERNA

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OBARA, R B e SINATORA, Amilton. Quantification of cylinder bores almost 'zero-wear'. Wear, v. 365-365, p. 364-365, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2016.08.002. Acesso em: 07 set. 2024.

    • APA

      Obara, R. B., & Sinatora, A. (2016). Quantification of cylinder bores almost 'zero-wear'. Wear, 365-365, 364-365. doi:10.1016/j.wear.2016.08.002

    • NLM

      Obara RB, Sinatora A. Quantification of cylinder bores almost 'zero-wear' [Internet]. Wear. 2016 ; 365-365 364-365.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2016.08.002

    • Vancouver

      Obara RB, Sinatora A. Quantification of cylinder bores almost 'zero-wear' [Internet]. Wear. 2016 ; 365-365 364-365.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2016.08.002

  • Artigo de periodico

    The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests (2015)

    Vieira, Tiago; Ferreira, Renata Prata; Kuchiishi, André Kazuo ; Bernucci, Liedi Légi Bariani ; Sinatora, Amilton

    Source: Wear. Unidade: EP

    Subjects: BORRACHA, FRICÇÃO, FADIGA DE CONTATO, RESISTÊNCIA DOS MATERIAIS

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VIEIRA, Tiago et al. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests. Wear, v. 328-329, p. 556-562, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.04.001. Acesso em: 07 set. 2024.

    • APA

      Vieira, T., Ferreira, R. P., Kuchiishi, A. K., Bernucci, L. L. B., & Sinatora, A. (2015). The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests. Wear, 328-329, 556-562. doi:10.1016/j.wear.2015.04.001

    • NLM

      Vieira T, Ferreira RP, Kuchiishi AK, Bernucci LLB, Sinatora A. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests [Internet]. Wear. 2015 ; 328-329 556-562.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.04.001

    • Vancouver

      Vieira T, Ferreira RP, Kuchiishi AK, Bernucci LLB, Sinatora A. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests [Internet]. Wear. 2015 ; 328-329 556-562.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.04.001

  • Artigo de periodico

    Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions (2015)

    Cozza, Ronaldo Câmara ; Rodrigues, Lucas Cremonese; Schön, Cláudio Geraldo

    Source: Wear. Unidade: EP

    Subjects: ALTA TEMPERATURA, DESGASTE ABRASIVO

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      COZZA, Ronaldo Câmara e RODRIGUES, Lucas Cremonese e SCHÖN, Cláudio Geraldo. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions. Wear, v. 330-331, p. 250-260, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.02.021. Acesso em: 07 set. 2024.

    • APA

      Cozza, R. C., Rodrigues, L. C., & Schön, C. G. (2015). Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions. Wear, 330-331, 250-260. doi:10.1016/j.wear.2015.02.021

    • NLM

      Cozza RC, Rodrigues LC, Schön CG. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions [Internet]. Wear. 2015 ; 330-331 250-260.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.02.021

    • Vancouver

      Cozza RC, Rodrigues LC, Schön CG. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions [Internet]. Wear. 2015 ; 330-331 250-260.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.02.021

  • Artigo de periodico

    Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest (2015)

    Rodrigues, Ana Cecília Pontes; Yonamine, Taeko; Albertin, Eduardo ; Sinatora, Amilton ; Azevedo, Cesar Roberto de Farias

    Source: Wear. Unidade: EP

    Subjects: AÇO, COBRE

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      RODRIGUES, Ana Cecília Pontes et al. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, v. 330-331, p. 70-78, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.02.006. Acesso em: 07 set. 2024.

    • APA

      Rodrigues, A. C. P., Yonamine, T., Albertin, E., Sinatora, A., & Azevedo, C. R. de F. (2015). Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, 330-331, 70-78. doi:10.1016/j.wear.2015.02.006

    • NLM

      Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006

    • Vancouver

      Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006

  • Artigo de periodico

    Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components (2014)

    Oliveira, André Luís Lima de; Trigo, Flávio Celso ; Martins, Flavius Portella Ribas

    Source: Wear. Unidade: EP

    Subjects: FADIGA DE CONTATO, PRÓTESE ARTICULAR, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OLIVEIRA, André Luís Lima de e TRIGO, Flávio Celso e MARTINS, Flavius Portella Ribas. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, v. 313, n. 1-2, p. 1-10, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2014.02.003. Acesso em: 07 set. 2024.

    • APA

      Oliveira, A. L. L. de, Trigo, F. C., & Martins, F. P. R. (2014). Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, 313( 1-2), 1-10. doi:10.1016/j.wear.2014.02.003

    • NLM

      Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003

    • Vancouver

      Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003

  • Artigo de periodico

    A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane (2013)

    Queiroz, R. Dantas; Oliveira, A L de; Trigo, Flávio Celso ; Lopes, J A

    Source: Wear. Unidade: EP

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA, POLÍMEROS (MATERIAIS)

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      QUEIROZ, R. Dantas et al. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, v. 298-299, p. 8-13, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.12.032. Acesso em: 07 set. 2024.

    • APA

      Queiroz, R. D., Oliveira, A. L. de, Trigo, F. C., & Lopes, J. A. (2013). A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, 298-299, 8-13. doi:10.1016/j.wear.2012.12.032

    • NLM

      Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032

    • Vancouver

      Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032

1 - 20 (49 records)

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024