Menu

Filtros : "Wear" Removidos: "ENSAIOS DOS MATERIAIS" "Brasil" "Centro Universitário FEI, São Bernardo do Campo" "Seriacopi, Vanessa" Limpar

Filtros

Limitar por data

1 - 20 (48 registros)

  • Artigo de periodico

    Scaling-up laser cladding of rails (2024)

    Yildirimli, K.; Pereira, h Boschetti; Pereira, H. Boschetti; Goldenstein, Hélio ; Fletcher, D. I.; Lee, Z. S.; Lewis, R

    Fonte: Wear.

    Assuntos: REVESTIMENTOS, TRILHOS, FERROVIAS, DESGASTE

    Acesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      YILDIRIMLI, K. et al. Scaling-up laser cladding of rails. Wear, v. 540-541, p. 15 205227, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.205227. Acesso em: 01 ago. 2024.

    • APA

      Yildirimli, K., Pereira, h B., Pereira, H. B., Goldenstein, H., Fletcher, D. I., Lee, Z. S., & Lewis, R. (2024). Scaling-up laser cladding of rails. Wear, 540-541, 15 205227. doi:10.1016/j.wear.2023.205227

    • NLM

      Yildirimli K, Pereira h B, Pereira HB, Goldenstein H, Fletcher DI, Lee ZS, Lewis R. Scaling-up laser cladding of rails [Internet]. Wear. 2024 ; 540-541 15 205227.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.205227

    • Vancouver

      Yildirimli K, Pereira h B, Pereira HB, Goldenstein H, Fletcher DI, Lee ZS, Lewis R. Scaling-up laser cladding of rails [Internet]. Wear. 2024 ; 540-541 15 205227.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.205227

  • Artigo de periodico

    Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys (2023)

    Paula, Angel Felipe Magnossão; Borges, Doris Feijó Leão; Silva, Felipe Carneiro da ; Rossino, Luciana Sgarbi; Manfrinato, Marcos Dorigão ; Verma, Vikas; Luna-Domínguez, Jorge Humberto; Magnabosco, Rodrigo ; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE ABRASIVO, ABRASÃO, TRIBOLOGIA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAULA, Angel Felipe Magnossão et al. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, v. 524-525, p. 16 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204867. Acesso em: 01 ago. 2024.

    • APA

      Paula, A. F. M., Borges, D. F. L., Silva, F. C. da, Rossino, L. S., Manfrinato, M. D., Verma, V., et al. (2023). Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, 524-525, 16 . doi:10.1016/j.wear.2023.204867

    • NLM

      Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.204867

    • Vancouver

      Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.204867

  • Artigo de periodico

    On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles (2023)

    Romero, Manuelle Corbani; Mello, Valdicleide; Boher, Christine; Tschiptschin, André Paulo ; Scandian, Cherlio

    Fonte: Wear. Unidade: EP

    Assuntos: REVESTIMENTOS, COBALTO, NANOCOMPOSITOS, NANOPARTÍCULAS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ROMERO, Manuelle Corbani et al. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, v. 522, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204835. Acesso em: 01 ago. 2024.

    • APA

      Romero, M. C., Mello, V., Boher, C., Tschiptschin, A. P., & Scandian, C. (2023). On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, 522, 8 . doi:10.1016/j.wear.2023.204835

    • NLM

      Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.204835

    • Vancouver

      Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2023.204835

  • Artigo de periodico

    A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting (2020)

    Arab, Paola Bruno; Celestino, Tarcísio Barreto

    Fonte: Wear. Unidade: EESC

    Assuntos: ABRASÃO, PETROGRAFIA, GEOTECNIA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ARAB, Paola Bruno e CELESTINO, Tarcísio Barreto. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting. Wear, v. 448-449, p. 1-8, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203210. Acesso em: 01 ago. 2024.

    • APA

      Arab, P. B., & Celestino, T. B. (2020). A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting. Wear, 448-449, 1-8. doi:10.1016/j.wear.2020.203210

    • NLM

      Arab PB, Celestino TB. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting [Internet]. Wear. 2020 ; 448-449 1-8.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2020.203210

    • Vancouver

      Arab PB, Celestino TB. A microscopic study on kerfs in rocks subjected to abrasive waterjet cutting [Internet]. Wear. 2020 ; 448-449 1-8.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2020.203210

  • Artigo de periodico

    Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study (2018)

    Santos Filho, Diolino Jose dos ; Tschiptschin, André Paulo ; Goldenstein, Hélio

    Fonte: Wear. Unidade: EP

    Assuntos: ETANOL, DESGASTE DOS MATERIAIS, FERRO FUNDIDO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SANTOS FILHO, Diolino Jose dos e TSCHIPTSCHIN, André Paulo e GOLDENSTEIN, Hélio. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, v. 406-407, p. 105-117, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2018.04.003. Acesso em: 01 ago. 2024.

    • APA

      Santos Filho, D. J. dos, Tschiptschin, A. P., & Goldenstein, H. (2018). Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, 406-407, 105-117. doi:10.1016/j.wear.2018.04.003

    • NLM

      Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003

    • Vancouver

      Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003

  • Artigo de periodico

    Quantification of folded metal in cylinder bores through surface relocation (2017)

    Obara, Rafael Brisolla ; Souza, Roberto Martins de ; Tomanik, E

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE DOS MATERIAIS, RESISTÊNCIA DOS MATERIAIS, DOBRADURA DE METAIS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OBARA, Rafael Brisolla e SOUZA, Roberto Martins de e TOMANIK, E. Quantification of folded metal in cylinder bores through surface relocation. Wear, v. 384-385, p. 142-150, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.05.016. Acesso em: 01 ago. 2024.

    • APA

      Obara, R. B., Souza, R. M. de, & Tomanik, E. (2017). Quantification of folded metal in cylinder bores through surface relocation. Wear, 384-385, 142-150. doi:10.1016/j.wear.2017.05.016

    • NLM

      Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016

    • Vancouver

      Obara RB, Souza RM de, Tomanik E. Quantification of folded metal in cylinder bores through surface relocation [Internet]. Wear. 2017 ; 384-385 142-150.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2017.05.016

  • Artigo de periodico

    Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials (2017)

    Franco, Luiz Alberto ; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE ABRASIVO, AÇO FUNDIDO, FERRO FUNDIDO CINZENTO

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FRANCO, Luiz Alberto e SINATORA, Amilton. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, v. 382-383, p. 51-61, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.04.006. Acesso em: 01 ago. 2024.

    • APA

      Franco, L. A., & Sinatora, A. (2017). Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials. Wear, 382-383, 51-61. doi:10.1016/j.wear.2017.04.006

    • NLM

      Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006

    • Vancouver

      Franco LA, Sinatora A. Material removal factor (fab): A critical assessment of its role in theoretical and practical approaches to abrasive wear of ductile materials [Internet]. Wear. 2017 ; 382-383 51-61.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2017.04.006

  • Artigo de periodico

    Quantification of cylinder bores almost 'zero-wear' (2016)

    Obara, R B; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, MOTORES DE COMBUSTÃO INTERNA

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OBARA, R B e SINATORA, Amilton. Quantification of cylinder bores almost 'zero-wear'. Wear, v. 365-365, p. 364-365, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2016.08.002. Acesso em: 01 ago. 2024.

    • APA

      Obara, R. B., & Sinatora, A. (2016). Quantification of cylinder bores almost 'zero-wear'. Wear, 365-365, 364-365. doi:10.1016/j.wear.2016.08.002

    • NLM

      Obara RB, Sinatora A. Quantification of cylinder bores almost 'zero-wear' [Internet]. Wear. 2016 ; 365-365 364-365.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2016.08.002

    • Vancouver

      Obara RB, Sinatora A. Quantification of cylinder bores almost 'zero-wear' [Internet]. Wear. 2016 ; 365-365 364-365.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2016.08.002

  • Artigo de periodico

    Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique (2015)

    Araujo, Juliano Avelar; Araujo, Gisela Marques ; Souza, Roberto Martins de ; Tschiptschin, André Paulo

    Fonte: Wear. Unidade: EP

    Assuntos: TRIBOLOGIA, DIFRAÇÃO POR RAIOS X

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ARAUJO, Juliano Avelar et al. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique. Wear, v. 330-331, p. 469-477, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.01.051. Acesso em: 01 ago. 2024.

    • APA

      Araujo, J. A., Araujo, G. M., Souza, R. M. de, & Tschiptschin, A. P. (2015). Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique. Wear, 330-331, 469-477. doi:10.1016/j.wear.2015.01.051

    • NLM

      Araujo JA, Araujo GM, Souza RM de, Tschiptschin AP. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique [Internet]. Wear. 2015 ; 330-331 469-477.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.01.051

    • Vancouver

      Araujo JA, Araujo GM, Souza RM de, Tschiptschin AP. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique [Internet]. Wear. 2015 ; 330-331 469-477.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.01.051

  • Artigo de periodico

    The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests (2015)

    Vieira, Tiago; Ferreira, Renata Prata; Kuchiishi, André Kazuo ; Bernucci, Liedi Légi Bariani ; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: BORRACHA, FRICÇÃO, FADIGA DE CONTATO, RESISTÊNCIA DOS MATERIAIS

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VIEIRA, Tiago et al. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests. Wear, v. 328-329, p. 556-562, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.04.001. Acesso em: 01 ago. 2024.

    • APA

      Vieira, T., Ferreira, R. P., Kuchiishi, A. K., Bernucci, L. L. B., & Sinatora, A. (2015). The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests. Wear, 328-329, 556-562. doi:10.1016/j.wear.2015.04.001

    • NLM

      Vieira T, Ferreira RP, Kuchiishi AK, Bernucci LLB, Sinatora A. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests [Internet]. Wear. 2015 ; 328-329 556-562.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.04.001

    • Vancouver

      Vieira T, Ferreira RP, Kuchiishi AK, Bernucci LLB, Sinatora A. The Evaluation of friction mechanisms and wear rates on rubber tire materials by low-cost laboratory tests [Internet]. Wear. 2015 ; 328-329 556-562.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.04.001

  • Artigo de periodico

    Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest (2015)

    Rodrigues, Ana Cecília Pontes; Yonamine, Taeko; Albertin, Eduardo ; Sinatora, Amilton ; Azevedo, Cesar Roberto de Farias

    Fonte: Wear. Unidade: EP

    Assuntos: AÇO, COBRE

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      RODRIGUES, Ana Cecília Pontes et al. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, v. 330-331, p. 70-78, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.02.006. Acesso em: 01 ago. 2024.

    • APA

      Rodrigues, A. C. P., Yonamine, T., Albertin, E., Sinatora, A., & Azevedo, C. R. de F. (2015). Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, 330-331, 70-78. doi:10.1016/j.wear.2015.02.006

    • NLM

      Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006

    • Vancouver

      Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006

  • Artigo de periodico

    Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components (2014)

    Oliveira, André Luís Lima de; Trigo, Flávio Celso ; Martins, Flavius Portella Ribas

    Fonte: Wear. Unidade: EP

    Assuntos: FADIGA DE CONTATO, PRÓTESE ARTICULAR, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      OLIVEIRA, André Luís Lima de e TRIGO, Flávio Celso e MARTINS, Flavius Portella Ribas. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, v. 313, n. 1-2, p. 1-10, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2014.02.003. Acesso em: 01 ago. 2024.

    • APA

      Oliveira, A. L. L. de, Trigo, F. C., & Martins, F. P. R. (2014). Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components. Wear, 313( 1-2), 1-10. doi:10.1016/j.wear.2014.02.003

    • NLM

      Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003

    • Vancouver

      Oliveira ALL de, Trigo FC, Martins FPR. Quantitative evaluation of parameters used in wear testing simulators of total hip arthroplasty components [Internet]. Wear. 2014 ; 313( 1-2): 1-10.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2014.02.003

  • Artigo de periodico

    A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane (2013)

    Queiroz, R. Dantas; Oliveira, A L de; Trigo, Flávio Celso ; Lopes, J A

    Fonte: Wear. Unidade: EP

    Assuntos: MÉTODO DOS ELEMENTOS FINITOS, RESISTÊNCIA DOS MATERIAIS, TRIBOLOGIA, POLÍMEROS (MATERIAIS)

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      QUEIROZ, R. Dantas et al. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, v. 298-299, p. 8-13, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.12.032. Acesso em: 01 ago. 2024.

    • APA

      Queiroz, R. D., Oliveira, A. L. de, Trigo, F. C., & Lopes, J. A. (2013). A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane. Wear, 298-299, 8-13. doi:10.1016/j.wear.2012.12.032

    • NLM

      Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032

    • Vancouver

      Queiroz RD, Oliveira AL de, Trigo FC, Lopes JA. A finite element method approach to compare the wear of acetabular cups in polyethylene according to their lateral tilt in relation tho coronal plane [Internet]. Wear. 2013 ; 298-299 8-13.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.12.032

  • Artigo de periodico

    Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites (2013)

    Gava, G H S; Souza, Roberto Martins de ; Mello, J D B; Macedo, M C S; Scandian, Cherlio

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE ABRASIVO, MATERIAIS COMPÓSITOS, RESISTÊNCIA DOS MATERIAIS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GAVA, G H S et al. Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites. Wear, v. 301, p. 130-136, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.11.080. Acesso em: 01 ago. 2024.

    • APA

      Gava, G. H. S., Souza, R. M. de, Mello, J. D. B., Macedo, M. C. S., & Scandian, C. (2013). Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites. Wear, 301, 130-136. doi:10.1016/j.wear.2012.11.080

    • NLM

      Gava GHS, Souza RM de, Mello JDB, Macedo MCS, Scandian C. Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites [Internet]. Wear. 2013 ; 301 130-136.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.11.080

    • Vancouver

      Gava GHS, Souza RM de, Mello JDB, Macedo MCS, Scandian C. Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites [Internet]. Wear. 2013 ; 301 130-136.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.11.080

  • Artigo de periodico

    Effect of particle hardness on mild–severe wear transition of hard second phase materials (2013)

    Coronado Marin, Joh Jairo; Rodriguez, S A; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: DESGASTE ABRASIVO, RESISTÊNCIA DOS MATERIAIS, FERRO FUNDIDO BRANCO

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CORONADO MARIN, Joh Jairo e RODRIGUEZ, S A e SINATORA, Amilton. Effect of particle hardness on mild–severe wear transition of hard second phase materials. Wear, v. 301, p. 82-88, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.12.016. Acesso em: 01 ago. 2024.

    • APA

      Coronado Marin, J. J., Rodriguez, S. A., & Sinatora, A. (2013). Effect of particle hardness on mild–severe wear transition of hard second phase materials. Wear, 301, 82-88. doi:10.1016/j.wear.2012.12.016

    • NLM

      Coronado Marin JJ, Rodriguez SA, Sinatora A. Effect of particle hardness on mild–severe wear transition of hard second phase materials [Internet]. Wear. 2013 ; 301 82-88.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.12.016

    • Vancouver

      Coronado Marin JJ, Rodriguez SA, Sinatora A. Effect of particle hardness on mild–severe wear transition of hard second phase materials [Internet]. Wear. 2013 ; 301 82-88.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.12.016

  • Artigo de periodico

    Mass low and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings (2012)

    Maranho, Ossimar; Rodrigues, D; Boccalini Júnior, Mário ; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: FERRO FUNDIDO BRANCO, PROCESSOS DE FABRICAÇÃO, TRATAMENTO TÉRMICO, DESGASTE DOS MATERIAIS

    PrivadoAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MARANHO, Ossimar et al. Mass low and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings. Wear, v. 274-275, p. 162-167, 2012Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2011.08.024. Acesso em: 01 ago. 2024.

    • APA

      Maranho, O., Rodrigues, D., Boccalini Júnior, M., & Sinatora, A. (2012). Mass low and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings. Wear, 274-275, 162-167. doi:10.1016/j.wear.2011.08.024

    • NLM

      Maranho O, Rodrigues D, Boccalini Júnior M, Sinatora A. Mass low and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings [Internet]. Wear. 2012 ; 274-275 162-167.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.08.024

    • Vancouver

      Maranho O, Rodrigues D, Boccalini Júnior M, Sinatora A. Mass low and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings [Internet]. Wear. 2012 ; 274-275 162-167.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.08.024

  • Artigo de periodico

    Ultra-low friction coefficient in alumina-silicon nitride pair lubricated with water (2012)

    Ferreira, Vanderlei; Yoshimura, Humberto Naoyuki ; Sinatora, Amilton

    Fonte: Wear. Unidade: EP

    Assuntos: ATRITO, DESGASTE, CERÂMICA

    PrivadoAcesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERREIRA, Vanderlei e YOSHIMURA, Humberto Naoyuki e SINATORA, Amilton. Ultra-low friction coefficient in alumina-silicon nitride pair lubricated with water. Wear, v. 296, n. 1, p. 656-659, 2012Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.07.030. Acesso em: 01 ago. 2024.

    • APA

      Ferreira, V., Yoshimura, H. N., & Sinatora, A. (2012). Ultra-low friction coefficient in alumina-silicon nitride pair lubricated with water. Wear, 296( 1), 656-659. doi:10.1016/j.wear.2012.07.030

    • NLM

      Ferreira V, Yoshimura HN, Sinatora A. Ultra-low friction coefficient in alumina-silicon nitride pair lubricated with water [Internet]. Wear. 2012 ; 296( 1): 656-659.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.07.030

    • Vancouver

      Ferreira V, Yoshimura HN, Sinatora A. Ultra-low friction coefficient in alumina-silicon nitride pair lubricated with water [Internet]. Wear. 2012 ; 296( 1): 656-659.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2012.07.030

  • Artigo de periodico

    Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys (2011)

    Silva, Wanderson Santana da; Souza, R. M; Mello, J D B; Goldenstein, Hélio

    Fonte: Wear. Unidade: EP

    Assuntos: TRIBOLOGIA, LIGAS DE ALTA RESISTÊNCIA, LIGAS FUNDIDAS

    Acesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Wanderson Santana da et al. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys. Wear, v. 271, n. 9-10, p. 1819-1827, 2011Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2011.02.030. Acesso em: 01 ago. 2024.

    • APA

      Silva, W. S. da, Souza, R. M., Mello, J. D. B., & Goldenstein, H. (2011). Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys. Wear, 271( 9-10), 1819-1827. doi:10.1016/j.wear.2011.02.030

    • NLM

      Silva WS da, Souza RM, Mello JDB, Goldenstein H. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys [Internet]. Wear. 2011 ; 271( 9-10): 1819-1827.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.02.030

    • Vancouver

      Silva WS da, Souza RM, Mello JDB, Goldenstein H. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys [Internet]. Wear. 2011 ; 271( 9-10): 1819-1827.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.02.030

  • Artigo de periodico

    Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware (2011)

    Buchner, Silvio; Mikowski, Alexandre; Lepienski, Carlos Mauricio; Ferreira, Eduardo Bellini; Zanotto, Edgar Dutra; Torres, Ricardo Diego; Soares Júnior, Paulo César

    Fonte: Wear. Unidade: EESC

    Assuntos: TRIBOLOGIA, DESGASTE CORROSIVO, VIDRO CERÂMICO

    Acesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BUCHNER, Silvio et al. Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware. Wear, v. 271, n. 5-6, p. 875-880, 2011Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2011.03.022. Acesso em: 01 ago. 2024.

    • APA

      Buchner, S., Mikowski, A., Lepienski, C. M., Ferreira, E. B., Zanotto, E. D., Torres, R. D., & Soares Júnior, P. C. (2011). Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware. Wear, 271( 5-6), 875-880. doi:10.1016/j.wear.2011.03.022

    • NLM

      Buchner S, Mikowski A, Lepienski CM, Ferreira EB, Zanotto ED, Torres RD, Soares Júnior PC. Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware [Internet]. Wear. 2011 ; 271( 5-6): 875-880.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.03.022

    • Vancouver

      Buchner S, Mikowski A, Lepienski CM, Ferreira EB, Zanotto ED, Torres RD, Soares Júnior PC. Mechanical and tribological properties of a sintered glass-ceramic compared to granite and porcelainized stoneware [Internet]. Wear. 2011 ; 271( 5-6): 875-880.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.03.022

  • Artigo de periodico

    Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels (2011)

    Mesa Grajales, Dairo Hernán ; Garzon, Carlos Mario; Tschiptschin, André Paulo

    Fonte: Wear. Unidade: EP

    Assuntos: AÇO INOXIDÁVEL, EROSÃO, ALTA TEMPERATURA

    Acesso à fonteAcesso à fonteDOIComo citar
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MESA GRAJALES, Dairo Hernán e GARZON, Carlos Mario e TSCHIPTSCHIN, André Paulo. Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels. Wear, v. 271, n. 9-10, p. 1372-1377, 2011Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2011.01.063. Acesso em: 01 ago. 2024.

    • APA

      Mesa Grajales, D. H., Garzon, C. M., & Tschiptschin, A. P. (2011). Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels. Wear, 271( 9-10), 1372-1377. doi:10.1016/j.wear.2011.01.063

    • NLM

      Mesa Grajales DH, Garzon CM, Tschiptschin AP. Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels [Internet]. Wear. 2011 ;271( 9-10): 1372-1377.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.01.063

    • Vancouver

      Mesa Grajales DH, Garzon CM, Tschiptschin AP. Influence of cold-work on the cavitation erosion resistance and on the damage mechanisms in high-nitrogen austenitic stainless steels [Internet]. Wear. 2011 ;271( 9-10): 1372-1377.[citado 2024 ago. 01 ] Available from: https://doi.org/10.1016/j.wear.2011.01.063

1 - 20 (48 registros)

Biblioteca Digital de Produção Intelectual da Universidade de São Paulo     2012 - 2024