ReP USP - Resultado da busca

Artigo de periodico
Formation dynamics of composite Ni-graphite abradable coatings (2025)
Alves, Juliane Ribeiro da Cruz ; Sampath, Sanjay
Source: Surface and Coatings Technology. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS DE MATRIZ METÁLICA, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALVES, Juliane Ribeiro da Cruz e SAMPATH, Sanjay. Formation dynamics of composite Ni-graphite abradable coatings. Surface and Coatings Technology, v. No 2025, p. 1-15, 2025Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2025.132755. Acesso em: 25 abr. 2026.
APA
Alves, J. R. da C., & Sampath, S. (2025). Formation dynamics of composite Ni-graphite abradable coatings. Surface and Coatings Technology, No 2025, 1-15. doi:10.1016/j.surfcoat.2025.132755
NLM
Alves JR da C, Sampath S. Formation dynamics of composite Ni-graphite abradable coatings [Internet]. Surface and Coatings Technology. 2025 ; No 2025 1-15.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2025.132755
Vancouver
Alves JR da C, Sampath S. Formation dynamics of composite Ni-graphite abradable coatings [Internet]. Surface and Coatings Technology. 2025 ; No 2025 1-15.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2025.132755
Artigo de periodico
Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system (2024)
Pereira, Julia Nascimento; Ott, Vincent; Afonso, Conrado Ramos Moreira; Malafaia, Artur Mariano de Sousa; Stüber, Michael; Greiner, Christian; Pinto, Haroldo Cavalcanti
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: MATERIAIS NANOESTRUTURADOS, METAIS, TRATAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Julia Nascimento et al. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system. Surface and Coatings Technology, v. 477, p. 1-11, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.surfcoat.2023.130369. Acesso em: 25 abr. 2026.
APA
Pereira, J. N., Ott, V., Afonso, C. R. M., Malafaia, A. M. de S., Stüber, M., Greiner, C., & Pinto, H. C. (2024). Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system. Surface and Coatings Technology, 477, 1-11. doi:10.1016/j.surfcoat.2023.130369
NLM
Pereira JN, Ott V, Afonso CRM, Malafaia AM de S, Stüber M, Greiner C, Pinto HC. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system [Internet]. Surface and Coatings Technology. 2024 ; 477 1-11.[citado 2026 abr. 25 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130369
Vancouver
Pereira JN, Ott V, Afonso CRM, Malafaia AM de S, Stüber M, Greiner C, Pinto HC. Influence of multilayer nanoarchitecture on phase transformations in the Ti-Cr-Zr system [Internet]. Surface and Coatings Technology. 2024 ; 477 1-11.[citado 2026 abr. 25 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130369
Artigo de periodico
Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA (2024)
Ramirez, Oscar Mauricio Prada ; Almeida, Thassia Felix de; Marin, Jayr Henrique ; Suegama, Patricia Hatsue ; Starykevich, Maksim; Ferreira, Mario G. S; Ando, Rômulo Augusto ; Melo, Hercílio Gomes de
Source: Surface and Coatings Technology. Unidades: EP, IQ
Subjects: HIDRÓLISE, ESPECTROSCOPIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMIREZ, Oscar Mauricio Prada et al. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA. Surface and Coatings Technology, v. 482, p. 1-13 art. 130683, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.surfcoat.2024.130683. Acesso em: 25 abr. 2026.
APA
Ramirez, O. M. P., Almeida, T. F. de, Marin, J. H., Suegama, P. H., Starykevich, M., Ferreira, M. G. S., et al. (2024). Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA. Surface and Coatings Technology, 482, 1-13 art. 130683. doi:10.1016/j.surfcoat.2024.130683
NLM
Ramirez OMP, Almeida TF de, Marin JH, Suegama PH, Starykevich M, Ferreira MGS, Ando RA, Melo HG de. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA [Internet]. Surface and Coatings Technology. 2024 ; 482 1-13 art. 130683.[citado 2026 abr. 25 ] Available from: https://dx.doi.org/10.1016/j.surfcoat.2024.130683
Vancouver
Ramirez OMP, Almeida TF de, Marin JH, Suegama PH, Starykevich M, Ferreira MGS, Ando RA, Melo HG de. Effect of hydrolysis time on the corrosion resistance of sol-gel coated AA2024-T3 anodized in TSA [Internet]. Surface and Coatings Technology. 2024 ; 482 1-13 art. 130683.[citado 2026 abr. 25 ] Available from: https://dx.doi.org/10.1016/j.surfcoat.2024.130683
Artigo de periodico
A VCoNiN multi-principal nitride film with excellent wear performance (2023)
Qikang, Li; Zhuobin, Huang; Mingda, Xie; Wenting, Ye; Qing, Zhou; Longshi, Qiu; Dan, Qian; Pinto, Haroldo Cavalcanti ; Zhongxiao, Song; Haifeng, Wang
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: DESGASTE DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
QIKANG, Li et al. A VCoNiN multi-principal nitride film with excellent wear performance. Surface and Coatings Technology, v. 475, p. 1-15, 2023Tradução . . Disponível em: http://dx.doi.org/10.1016/j.surfcoat.2023.130130. Acesso em: 25 abr. 2026.
APA
Qikang, L., Zhuobin, H., Mingda, X., Wenting, Y., Qing, Z., Longshi, Q., et al. (2023). A VCoNiN multi-principal nitride film with excellent wear performance. Surface and Coatings Technology, 475, 1-15. doi:10.1016/j.surfcoat.2023.130130
NLM
Qikang L, Zhuobin H, Mingda X, Wenting Y, Qing Z, Longshi Q, Dan Q, Pinto HC, Zhongxiao S, Haifeng W. A VCoNiN multi-principal nitride film with excellent wear performance [Internet]. Surface and Coatings Technology. 2023 ; 475 1-15.[citado 2026 abr. 25 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130130
Vancouver
Qikang L, Zhuobin H, Mingda X, Wenting Y, Qing Z, Longshi Q, Dan Q, Pinto HC, Zhongxiao S, Haifeng W. A VCoNiN multi-principal nitride film with excellent wear performance [Internet]. Surface and Coatings Technology. 2023 ; 475 1-15.[citado 2026 abr. 25 ] Available from: http://dx.doi.org/10.1016/j.surfcoat.2023.130130
Artigo de periodico
Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films (2021)
Nascimento, João Pedro Lopes do ; Ferreira, Murilo Oliveira Alves; Gelamo, Rogerio Valentim ; Scarmínio, Jair ; Steffen, Teresa Tromm ; Silva, Brunela Pereira da ; Aoki, Idalina Vieira ; Santos Jr, Adilar Gonçalves dos ; Castro, Victor Velho de ; Malfatti, Celia de Fraga ; Moreto, Jéferson Aparecido
Source: Surface and Coatings Technology. Unidade: EP
Subjects: TITÂNIO, BIOMATERIAIS, CORROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, João Pedro Lopes do et al. Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films. Surface and Coatings Technology, v. 428, p. 1-11, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2021.127854. Acesso em: 25 abr. 2026.
APA
Nascimento, J. P. L. do, Ferreira, M. O. A., Gelamo, R. V., Scarmínio, J., Steffen, T. T., Silva, B. P. da, et al. (2021). Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films. Surface and Coatings Technology, 428, 1-11. doi:10.1016/j.surfcoat.2021.127854
NLM
Nascimento JPL do, Ferreira MOA, Gelamo RV, Scarmínio J, Steffen TT, Silva BP da, Aoki IV, Santos Jr AG dos, Castro VV de, Malfatti C de F, Moreto JA. Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films [Internet]. Surface and Coatings Technology. 2021 ;428 1-11.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2021.127854
Vancouver
Nascimento JPL do, Ferreira MOA, Gelamo RV, Scarmínio J, Steffen TT, Silva BP da, Aoki IV, Santos Jr AG dos, Castro VV de, Malfatti C de F, Moreto JA. Enhancing the corrosion protection of Ti-6Al-4V alloy through reactive sputtering niobium oxide thin films [Internet]. Surface and Coatings Technology. 2021 ;428 1-11.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2021.127854
Artigo de periodico
Wear and corrosion resistance of Nb-V carbide layers produced in vermicular cast iron using TRD treatments (2020)
Mariani, Fábio Edson ; Takeya, Gustavo Satoru; Lombardi Neto, Amadeu; Picone, Carlos Alberto ; Casteletti, Luiz Carlos
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: CORROSÃO DOS MATERIAIS, DESGASTE DOS MATERIAIS, FERRO FUNDIDO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Wear and corrosion resistance of Nb-V carbide layers produced in vermicular cast iron using TRD treatments. Surface and Coatings Technology, v. 397, p. Se 2020, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2020.126050. Acesso em: 25 abr. 2026.
APA
Mariani, F. E., Takeya, G. S., Lombardi Neto, A., Picone, C. A., & Casteletti, L. C. (2020). Wear and corrosion resistance of Nb-V carbide layers produced in vermicular cast iron using TRD treatments. Surface and Coatings Technology, 397, Se 2020. doi:10.1016/j.surfcoat.2020.126050
NLM
Mariani FE, Takeya GS, Lombardi Neto A, Picone CA, Casteletti LC. Wear and corrosion resistance of Nb-V carbide layers produced in vermicular cast iron using TRD treatments [Internet]. Surface and Coatings Technology. 2020 ; 397 Se 2020.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.126050
Vancouver
Mariani FE, Takeya GS, Lombardi Neto A, Picone CA, Casteletti LC. Wear and corrosion resistance of Nb-V carbide layers produced in vermicular cast iron using TRD treatments [Internet]. Surface and Coatings Technology. 2020 ; 397 Se 2020.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.126050
Artigo de periodico
Effects of shallow plasma nitriding on the surface topography of gray cast iron specimens (2020)
Santos Filho, Dinecio dos; Tschiptschin, André Paulo ; Goldenstein, Hélio
Source: Surface and Coatings Technology. Unidade: EP
Subjects: ELEMENTOS DE MÁQUINAS, FERRO FUNDIDO CINZENTO, MOTORES DE COMBUSTÃO INTERNA, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Dinecio dos e TSCHIPTSCHIN, André Paulo e GOLDENSTEIN, Hélio. Effects of shallow plasma nitriding on the surface topography of gray cast iron specimens. Surface and Coatings Technology, v. 404, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2020.126464. Acesso em: 25 abr. 2026.
APA
Santos Filho, D. dos, Tschiptschin, A. P., & Goldenstein, H. (2020). Effects of shallow plasma nitriding on the surface topography of gray cast iron specimens. Surface and Coatings Technology, 404. doi:10.1016/j.surfcoat.2020.126464
NLM
Santos Filho D dos, Tschiptschin AP, Goldenstein H. Effects of shallow plasma nitriding on the surface topography of gray cast iron specimens [Internet]. Surface and Coatings Technology. 2020 ; 404[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.126464
Vancouver
Santos Filho D dos, Tschiptschin AP, Goldenstein H. Effects of shallow plasma nitriding on the surface topography of gray cast iron specimens [Internet]. Surface and Coatings Technology. 2020 ; 404[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.126464
Artigo de periodico
Surface property modification of biocompatible material based on polylactic acid by ion implantation (2020)
Kurzina, I. A.; Laput, O. A.; Zuza, D. A.; Vasenina, I. V.; Salvadori, Maria Cecília Barbosa da Silveira ; Savkin, K. P.; Lytkina, D. N.; Botvin, V. V.; Kalashnikov, M. P.
Source: Surface and Coatings Technology. Unidade: IF
Subjects: POLÍMEROS (QUÍMICA ORGÂNICA), FILMES FINOS, FÍSICO-QUÍMICA, ESPECTROSCOPIA DE RAIO X, NANOPARTÍCULAS, FÍSICO-QUÍMICA ORGÂNICA, BIOMEDICINA, CITOTOXICIDADE IMUNOLÓGICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KURZINA, I. A. et al. Surface property modification of biocompatible material based on polylactic acid by ion implantation. Surface and Coatings Technology, v. 388, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2020.125529. Acesso em: 25 abr. 2026.
APA
Kurzina, I. A., Laput, O. A., Zuza, D. A., Vasenina, I. V., Salvadori, M. C. B. da S., Savkin, K. P., et al. (2020). Surface property modification of biocompatible material based on polylactic acid by ion implantation. Surface and Coatings Technology, 388. doi:10.1016/j.surfcoat.2020.125529
NLM
Kurzina IA, Laput OA, Zuza DA, Vasenina IV, Salvadori MCB da S, Savkin KP, Lytkina DN, Botvin VV, Kalashnikov MP. Surface property modification of biocompatible material based on polylactic acid by ion implantation [Internet]. Surface and Coatings Technology. 2020 ; 388[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.125529
Vancouver
Kurzina IA, Laput OA, Zuza DA, Vasenina IV, Salvadori MCB da S, Savkin KP, Lytkina DN, Botvin VV, Kalashnikov MP. Surface property modification of biocompatible material based on polylactic acid by ion implantation [Internet]. Surface and Coatings Technology. 2020 ; 388[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2020.125529
Artigo de periodico
Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding (2019)
Cano Ordoñez, Michell Felipe ; Amorim, Cintia L. G.; Krindges, Israel; Aguzzoli, Cesar; Baumvol, Israel Jacob Rabin; Figueroa, Carlos A. ; Sinatora, Amilton ; Souza, Roberto Martins de ; Moré Farías, María Cristina
Source: Surface and Coatings Technology. Unidade: EP
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, DESGASTE CORROSIVO, DESGASTE DOS MATERIAIS, METALURGIA DO PÓ
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CANO ORDOÑEZ, Michell Felipe et al. Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding. Surface and Coatings Technology, v. 374, p. 700-71, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2019.06.002. Acesso em: 25 abr. 2026.
APA
Cano Ordoñez, M. F., Amorim, C. L. G., Krindges, I., Aguzzoli, C., Baumvol, I. J. R., Figueroa, C. A., et al. (2019). Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding. Surface and Coatings Technology, 374, 700-71. doi:10.1016/j.surfcoat.2019.06.002
NLM
Cano Ordoñez MF, Amorim CLG, Krindges I, Aguzzoli C, Baumvol IJR, Figueroa CA, Sinatora A, Souza RM de, Moré Farías MC. Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding [Internet]. Surface and Coatings Technology. 2019 ; 374 700-71.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.06.002
Vancouver
Cano Ordoñez MF, Amorim CLG, Krindges I, Aguzzoli C, Baumvol IJR, Figueroa CA, Sinatora A, Souza RM de, Moré Farías MC. Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding [Internet]. Surface and Coatings Technology. 2019 ; 374 700-71.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.06.002
Artigo de periodico
Collagen-supported CaCO3 cylindrical particles enhance Ti bioactivity (2019)
Tovani, Camila Bussola; Faria, Amanda Natalina de; Ciancaglini, Pietro ; Ramos, Ana Paula
Source: Surface and Coatings Technology. Unidade: FFCLRP
Subjects: TITÂNIO, COLÁGENO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOVANI, Camila Bussola et al. Collagen-supported CaCO3 cylindrical particles enhance Ti bioactivity. Surface and Coatings Technology, v. 358, p. 858-864, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2018.11.071. Acesso em: 25 abr. 2026.
APA
Tovani, C. B., Faria, A. N. de, Ciancaglini, P., & Ramos, A. P. (2019). Collagen-supported CaCO3 cylindrical particles enhance Ti bioactivity. Surface and Coatings Technology, 358, 858-864. doi:10.1016/j.surfcoat.2018.11.071
NLM
Tovani CB, Faria AN de, Ciancaglini P, Ramos AP. Collagen-supported CaCO3 cylindrical particles enhance Ti bioactivity [Internet]. Surface and Coatings Technology. 2019 ; 358 858-864.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.11.071
Vancouver
Tovani CB, Faria AN de, Ciancaglini P, Ramos AP. Collagen-supported CaCO3 cylindrical particles enhance Ti bioactivity [Internet]. Surface and Coatings Technology. 2019 ; 358 858-864.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.11.071
Artigo de periodico
Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating (2019)
Terada, Maysa ; Queiroz, Fernanda Martins ; Olivier, Marjorie G; Aguiar, D. B.S.; Ayusso, Vitor H; Costenaro, Hellen; Melo, Hercilio Gomes de ; Costa, Isolda
Source: Surface and Coatings Technology. Unidades: EP, IPEN
Subjects: CORROSÃO DOS MATERIAIS, MICROSCOPIA ELETRÔNICA, ANODIZAÇÃO, LIGAS NÃO METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TERADA, Maysa et al. Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating. Surface and Coatings Technology, v. 372, p. 422-426, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2019.05.028. Acesso em: 25 abr. 2026.
APA
Terada, M., Queiroz, F. M., Olivier, M. G., Aguiar, D. B. S., Ayusso, V. H., Costenaro, H., et al. (2019). Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating. Surface and Coatings Technology, 372, 422-426. doi:10.1016/j.surfcoat.2019.05.028
NLM
Terada M, Queiroz FM, Olivier MG, Aguiar DBS, Ayusso VH, Costenaro H, Melo HG de, Costa I. Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating [Internet]. Surface and Coatings Technology. 2019 ; 372 422-426.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.05.028
Vancouver
Terada M, Queiroz FM, Olivier MG, Aguiar DBS, Ayusso VH, Costenaro H, Melo HG de, Costa I. Corrosion resistance of tartaric-sulfuric acid anodized AA2024-T3 sealed with Ce and protected with hybrid sol–gel coating [Internet]. Surface and Coatings Technology. 2019 ; 372 422-426.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.05.028
Artigo de periodico
Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel (2017)
Tschiptschin, André Paulo ; Pinedo, Carlos Eduardo ; Li, Xiao-Ying; Dong, Hanshan
Source: Surface and Coatings Technology. Unidade: EP
Subjects: AÇO INOXIDÁVEL DUPLEX, ALTA TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TSCHIPTSCHIN, André Paulo et al. Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel. Surface and Coatings Technology, v. 327, p. 83-92, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2017.08.018. Acesso em: 25 abr. 2026.
APA
Tschiptschin, A. P., Pinedo, C. E., Li, X. -Y., & Dong, H. (2017). Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel. Surface and Coatings Technology, 327, 83-92. doi:10.1016/j.surfcoat.2017.08.018
NLM
Tschiptschin AP, Pinedo CE, Li X-Y, Dong H. Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel [Internet]. Surface and Coatings Technology. 2017 ; 327 83-92.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2017.08.018
Vancouver
Tschiptschin AP, Pinedo CE, Li X-Y, Dong H. Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel [Internet]. Surface and Coatings Technology. 2017 ; 327 83-92.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2017.08.018
Artigo de periodico
Evolution of the structural and microstructural characteristics of SrSn1-xTixO3 thin films under the influence of the composition, the substrate and the deposition method (2017)
Oliveira, André Luiz Menezes de; Bouquet, Valérie; Dorcet, Vincent; Ollivier, Sophie; Députier, Stéphanie; Souza, Antônio Gouveia de; Siu Li, Máximo ; Longo, Elson; Weber, Ingrid Távora; Santos, Iêda Maria Garcia dos; Guilloux-Viry, Maryline
Source: Surface and Coatings Technology. Unidade: IFSC
Subjects: FILMES FINOS, FOTOLUMINESCÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, André Luiz Menezes de et al. Evolution of the structural and microstructural characteristics of SrSn1-xTixO3 thin films under the influence of the composition, the substrate and the deposition method. Surface and Coatings Technology, v. 313, p. 361-373, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat2017.01.082. Acesso em: 25 abr. 2026.
APA
Oliveira, A. L. M. de, Bouquet, V., Dorcet, V., Ollivier, S., Députier, S., Souza, A. G. de, et al. (2017). Evolution of the structural and microstructural characteristics of SrSn1-xTixO3 thin films under the influence of the composition, the substrate and the deposition method. Surface and Coatings Technology, 313, 361-373. doi:10.1016/j.surfcoat2017.01.082
NLM
Oliveira ALM de, Bouquet V, Dorcet V, Ollivier S, Députier S, Souza AG de, Siu Li M, Longo E, Weber IT, Santos IMG dos, Guilloux-Viry M. Evolution of the structural and microstructural characteristics of SrSn1-xTixO3 thin films under the influence of the composition, the substrate and the deposition method [Internet]. Surface and Coatings Technology. 2017 ; 313 361-373.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat2017.01.082
Vancouver
Oliveira ALM de, Bouquet V, Dorcet V, Ollivier S, Députier S, Souza AG de, Siu Li M, Longo E, Weber IT, Santos IMG dos, Guilloux-Viry M. Evolution of the structural and microstructural characteristics of SrSn1-xTixO3 thin films under the influence of the composition, the substrate and the deposition method [Internet]. Surface and Coatings Technology. 2017 ; 313 361-373.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat2017.01.082
Artigo de periodico
Characterization and tribologic study in high vacuum of hydrogenated DLC films deposited using pulsed DC PECVD system for space applications (2017)
Lugo, Dubrazkha C; Silva, Patricia C.; Ramirez, Marco Antonio; Mitma Pillaca, Elver Juan de Dios ; Rodrigues, Cleber ; Fukumasu, Newton Kiyoshi ; Corat, Evaldo José ; Tabacniks, Manfredo Harri ; Trava-Airoldi, Vladimir Jesus
Source: Surface and Coatings Technology. Unidades: IF, EP
Subjects: FÍSICA NUCLEAR, MATERIAIS, CARBONO, DIAMANTE, TITÂNIO, TRIBOLOGIA, ATRITO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LUGO, Dubrazkha C et al. Characterization and tribologic study in high vacuum of hydrogenated DLC films deposited using pulsed DC PECVD system for space applications. Surface and Coatings Technology, v. 332, p. 135-141, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2017.07.084. Acesso em: 25 abr. 2026.
APA
Lugo, D. C., Silva, P. C., Ramirez, M. A., Mitma Pillaca, E. J. de D., Rodrigues, C., Fukumasu, N. K., et al. (2017). Characterization and tribologic study in high vacuum of hydrogenated DLC films deposited using pulsed DC PECVD system for space applications. Surface and Coatings Technology, 332, 135-141. doi:10.1016/j.surfcoat.2017.07.084
NLM
Lugo DC, Silva PC, Ramirez MA, Mitma Pillaca EJ de D, Rodrigues C, Fukumasu NK, Corat EJ, Tabacniks MH, Trava-Airoldi VJ. Characterization and tribologic study in high vacuum of hydrogenated DLC films deposited using pulsed DC PECVD system for space applications [Internet]. Surface and Coatings Technology. 2017 ; 332 135-141.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2017.07.084
Vancouver
Lugo DC, Silva PC, Ramirez MA, Mitma Pillaca EJ de D, Rodrigues C, Fukumasu NK, Corat EJ, Tabacniks MH, Trava-Airoldi VJ. Characterization and tribologic study in high vacuum of hydrogenated DLC films deposited using pulsed DC PECVD system for space applications [Internet]. Surface and Coatings Technology. 2017 ; 332 135-141.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2017.07.084
Artigo de periodico
Highly ordered mesoporous silica loaded with dodecylamine for smart anticorrosion coatings (2016)
Falcón Roque, Jesús Marino; Otubo, L.M.; Aoki, Idalina Vieira
Source: Surface and Coatings Technology. Unidade: EP
Subjects: INIBIDORES DE CORROSÃO, REVESTIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FALCÓN ROQUE, Jesús Marino e OTUBO, L.M. e AOKI, Idalina Vieira. Highly ordered mesoporous silica loaded with dodecylamine for smart anticorrosion coatings. Surface and Coatings Technology, v. 303 p. 319-329, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2015.11.029. Acesso em: 25 abr. 2026.
APA
Falcón Roque, J. M., Otubo, L. M., & Aoki, I. V. (2016). Highly ordered mesoporous silica loaded with dodecylamine for smart anticorrosion coatings. Surface and Coatings Technology, 303 p. 319-329. doi:10.1016/j.surfcoat.2015.11.029
NLM
Falcón Roque JM, Otubo LM, Aoki IV. Highly ordered mesoporous silica loaded with dodecylamine for smart anticorrosion coatings [Internet]. Surface and Coatings Technology. 2016 ; 303 p. 319-329[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.11.029
Vancouver
Falcón Roque JM, Otubo LM, Aoki IV. Highly ordered mesoporous silica loaded with dodecylamine for smart anticorrosion coatings [Internet]. Surface and Coatings Technology. 2016 ; 303 p. 319-329[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.11.029
Artigo de periodico
Low-temperature plasma nitriding of AISI F51 duplex stainless steel (2013)
Pinedo, Carlos Eduardo ; Varela Jiménez, Luis Bernardo ; Tschiptschin, André Paulo
Source: Surface and Coatings Technology. Unidade: EP
Assunto: AÇO INOXIDÁVEL DUPLEX
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINEDO, Carlos Eduardo e VARELA JIMÉNEZ, Luis Bernardo e TSCHIPTSCHIN, André Paulo. Low-temperature plasma nitriding of AISI F51 duplex stainless steel. Surface and Coatings Technology, v. 232, p. 839-843, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2013.06.109. Acesso em: 25 abr. 2026.
APA
Pinedo, C. E., Varela Jiménez, L. B., & Tschiptschin, A. P. (2013). Low-temperature plasma nitriding of AISI F51 duplex stainless steel. Surface and Coatings Technology, 232, 839-843. doi:10.1016/j.surfcoat.2013.06.109
NLM
Pinedo CE, Varela Jiménez LB, Tschiptschin AP. Low-temperature plasma nitriding of AISI F51 duplex stainless steel [Internet]. Surface and Coatings Technology. 2013 ;232 839-843.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2013.06.109
Vancouver
Pinedo CE, Varela Jiménez LB, Tschiptschin AP. Low-temperature plasma nitriding of AISI F51 duplex stainless steel [Internet]. Surface and Coatings Technology. 2013 ;232 839-843.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2013.06.109
Artigo de periodico
Nanosized precipitates in H13 tool steel low temperature plasma nitriding (2012)
Zagonel, Luiz Fernando; Bettini, J.; Basso, R. L. O.; Paredez Angeles, Pablo Jenner; Pinto, Haroldo Cavalcanti ; Lepienski, C. M.; Alvarez, Fernando
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: TÊMPERA (ENGENHARIA), AÇO FERRAMENTA, PLASMA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAGONEL, Luiz Fernando et al. Nanosized precipitates in H13 tool steel low temperature plasma nitriding. Surface and Coatings Technology, v. 207, p. 72-78, 2012Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2012.05.081. Acesso em: 25 abr. 2026.
APA
Zagonel, L. F., Bettini, J., Basso, R. L. O., Paredez Angeles, P. J., Pinto, H. C., Lepienski, C. M., & Alvarez, F. (2012). Nanosized precipitates in H13 tool steel low temperature plasma nitriding. Surface and Coatings Technology, 207, 72-78. doi:10.1016/j.surfcoat.2012.05.081
NLM
Zagonel LF, Bettini J, Basso RLO, Paredez Angeles PJ, Pinto HC, Lepienski CM, Alvarez F. Nanosized precipitates in H13 tool steel low temperature plasma nitriding [Internet]. Surface and Coatings Technology. 2012 ; 207 72-78.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2012.05.081
Vancouver
Zagonel LF, Bettini J, Basso RLO, Paredez Angeles PJ, Pinto HC, Lepienski CM, Alvarez F. Nanosized precipitates in H13 tool steel low temperature plasma nitriding [Internet]. Surface and Coatings Technology. 2012 ; 207 72-78.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2012.05.081
Artigo de periodico
Diffraction gratings fabricated in DLC thin films (2010)
Cirino, Giuseppe Antonio; Mansano, Ronaldo Domingues ; Verdonck, Patrick Bernard; Jasinevicius, Renato Goulart ; Gonçalves Neto, Luiz
Source: Surface and Coatings Technology. Unidades: EP, EESC
Subjects: HOLOGRAMAS, ANÁLISE DE FOURIER, ÓPTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CIRINO, Giuseppe Antonio et al. Diffraction gratings fabricated in DLC thin films. Surface and Coatings Technology, v. 204, n. 18-19, p. 2966-2970, 2010Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2010.02.037. Acesso em: 25 abr. 2026.
APA
Cirino, G. A., Mansano, R. D., Verdonck, P. B., Jasinevicius, R. G., & Gonçalves Neto, L. (2010). Diffraction gratings fabricated in DLC thin films. Surface and Coatings Technology, 204( 18-19), 2966-2970. doi:10.1016/j.surfcoat.2010.02.037
NLM
Cirino GA, Mansano RD, Verdonck PB, Jasinevicius RG, Gonçalves Neto L. Diffraction gratings fabricated in DLC thin films [Internet]. Surface and Coatings Technology. 2010 ; 204( 18-19): 2966-2970.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2010.02.037
Vancouver
Cirino GA, Mansano RD, Verdonck PB, Jasinevicius RG, Gonçalves Neto L. Diffraction gratings fabricated in DLC thin films [Internet]. Surface and Coatings Technology. 2010 ; 204( 18-19): 2966-2970.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2010.02.037
Trabalho de evento-anais periodico
Ion beam assisted deposition of an organic light emitting diode electrode (2010)
Dionysio, D. Olzon; Chubaci, José Fernando Diniz ; Matsuoka, Masao; Faria, Roberto Mendonça ; Guimarães, Francisco Eduardo Gontijo
Source: Surface and Coatings Technology. Conference titles: International Workshop on Plasma-Based Ion Implantation and Deposition. Unidades: IF, IFSC
Subjects: ÍONS (ESTUDO), POLÍMEROS (MATERIAIS), EMISSÃO DA LUZ, DIODOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIONYSIO, D. Olzon et al. Ion beam assisted deposition of an organic light emitting diode electrode. Surface and Coatings Technology. Lausanne: Elsevier. Disponível em: https://doi.org/10.1016/j.surfcoat.2010.01.014. Acesso em: 25 abr. 2026. , 2010
APA
Dionysio, D. O., Chubaci, J. F. D., Matsuoka, M., Faria, R. M., & Guimarães, F. E. G. (2010). Ion beam assisted deposition of an organic light emitting diode electrode. Surface and Coatings Technology. Lausanne: Elsevier. doi:10.1016/j.surfcoat.2010.01.014
NLM
Dionysio DO, Chubaci JFD, Matsuoka M, Faria RM, Guimarães FEG. Ion beam assisted deposition of an organic light emitting diode electrode [Internet]. Surface and Coatings Technology. 2010 ; 204( 18/19): 3096-3099.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2010.01.014
Vancouver
Dionysio DO, Chubaci JFD, Matsuoka M, Faria RM, Guimarães FEG. Ion beam assisted deposition of an organic light emitting diode electrode [Internet]. Surface and Coatings Technology. 2010 ; 204( 18/19): 3096-3099.[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2010.01.014
Artigo de periodico
X-ray photoelectron spectroscopy analysis of zirconium nitride-like filmsprepared on Si(100) substrates by ion beam assisted deposition (2008)
Matsuoka, Masao; Isotani, Sadao; Mamani, Wilmer Alexe Sucasaire; Kuratani, N; Ogata, K
Source: Surface and Coatings Technology. Unidade: IF
Subjects: FILMES FINOS, ESTRUTURA ELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATSUOKA, Masao et al. X-ray photoelectron spectroscopy analysis of zirconium nitride-like filmsprepared on Si(100) substrates by ion beam assisted deposition. Surface and Coatings Technology, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2007.11.019. Acesso em: 25 abr. 2026.
APA
Matsuoka, M., Isotani, S., Mamani, W. A. S., Kuratani, N., & Ogata, K. (2008). X-ray photoelectron spectroscopy analysis of zirconium nitride-like filmsprepared on Si(100) substrates by ion beam assisted deposition. Surface and Coatings Technology. doi:10.1016/j.surfcoat.2007.11.019
NLM
Matsuoka M, Isotani S, Mamani WAS, Kuratani N, Ogata K. X-ray photoelectron spectroscopy analysis of zirconium nitride-like filmsprepared on Si(100) substrates by ion beam assisted deposition [Internet]. Surface and Coatings Technology. 2008 ;[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.11.019
Vancouver
Matsuoka M, Isotani S, Mamani WAS, Kuratani N, Ogata K. X-ray photoelectron spectroscopy analysis of zirconium nitride-like filmsprepared on Si(100) substrates by ion beam assisted deposition [Internet]. Surface and Coatings Technology. 2008 ;[citado 2026 abr. 25 ] Available from: https://doi.org/10.1016/j.surfcoat.2007.11.019

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Grupo de pesquisa

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration