ReP USP - Resultado da busca

Artigo de periodico
Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration (2024)
Masoumi, Mohammad ; Ariza Echeverri, Edwan Anderson ; Centeno, Dany Michell Andrade ; Tressia, Gustavo ; Márquez-Rossy, Andrés; Poplawsky, Jonathan D. ; Tschiptschin, André Paulo
Source: Materials Characterization. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, DILATAÇÃO, AÇO, SILÍCIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MASOUMI, Mohammad et al. Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration. Materials Characterization, v. 207, p. 19 , 2024Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2023.113523. Acesso em: 04 nov. 2024.
APA
Masoumi, M., Ariza Echeverri, E. A., Centeno, D. M. A., Tressia, G., Márquez-Rossy, A., Poplawsky, J. D., & Tschiptschin, A. P. (2024). Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration. Materials Characterization, 207, 19 . doi:10.1016/j.matchar.2023.113523
NLM
Masoumi M, Ariza Echeverri EA, Centeno DMA, Tressia G, Márquez-Rossy A, Poplawsky JD, Tschiptschin AP. Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration [Internet]. Materials Characterization. 2024 ; 207 19 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2023.113523
Vancouver
Masoumi M, Ariza Echeverri EA, Centeno DMA, Tressia G, Márquez-Rossy A, Poplawsky JD, Tschiptschin AP. Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration [Internet]. Materials Characterization. 2024 ; 207 19 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2023.113523
Artigo de periodico
Improvements on the characterization of heterogeneities in grain size by network analysis (2023)
Moreira, Victor Caso; Tschiptschin, André Paulo ; Dutra, Júlio César
Source: Materials Characterization. Unidade: EP
Subjects: GRÃOS, RECRISTALIZAÇÃO, TOPOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Victor Caso e TSCHIPTSCHIN, André Paulo e DUTRA, Júlio César. Improvements on the characterization of heterogeneities in grain size by network analysis. Materials Characterization, v. 195, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2022.112551. Acesso em: 04 nov. 2024.
APA
Moreira, V. C., Tschiptschin, A. P., & Dutra, J. C. (2023). Improvements on the characterization of heterogeneities in grain size by network analysis. Materials Characterization, 195, 8 . doi:10.1016/j.matchar.2022.112551
NLM
Moreira VC, Tschiptschin AP, Dutra JC. Improvements on the characterization of heterogeneities in grain size by network analysis [Internet]. Materials Characterization. 2023 ; 195 8 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2022.112551
Vancouver
Moreira VC, Tschiptschin AP, Dutra JC. Improvements on the characterization of heterogeneities in grain size by network analysis [Internet]. Materials Characterization. 2023 ; 195 8 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2022.112551
Artigo de periodico
Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fireresistant steel (2021)
Escobar, Julian D. ; Delfino, P. M.; Ariza Echeverri, Edwan Anderson ; Carvalho, F. M.; Schell, N.; Stark, A; Rodrigues, T.A.; Oliveira, J. P.; Ávila, J. A. ; Goldenstein, Hélio ; Tschiptschin, André Paulo
Source: Materials Characterization. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESCOBAR, Julian D. et al. Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fireresistant steel. Materials Characterization, v. 182, p. 13 , 2021Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2021.111567. Acesso em: 04 nov. 2024.
APA
Escobar, J. D., Delfino, P. M., Ariza Echeverri, E. A., Carvalho, F. M., Schell, N., Stark, A., et al. (2021). Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fireresistant steel. Materials Characterization, 182, 13 . doi:10.1016/j.matchar.2021.111567
NLM
Escobar JD, Delfino PM, Ariza Echeverri EA, Carvalho FM, Schell N, Stark A, Rodrigues TA, Oliveira JP, Ávila JA, Goldenstein H, Tschiptschin AP. Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fireresistant steel [Internet]. Materials Characterization. 2021 ; 182 13 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2021.111567
Vancouver
Escobar JD, Delfino PM, Ariza Echeverri EA, Carvalho FM, Schell N, Stark A, Rodrigues TA, Oliveira JP, Ávila JA, Goldenstein H, Tschiptschin AP. Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fireresistant steel [Internet]. Materials Characterization. 2021 ; 182 13 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2021.111567
Artigo de periodico
Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion (2021)
Unti, L.F. Kultz; Aota, L. S.; Jardini, A. L.; Tschiptschin, André Paulo ; Sandim, Hugo Ricardo Zschommler ; Jägle, E.A.; Zilnyk, Kahl Dick
Source: Materials Characterization. Unidades: EP, EEL
Subjects: AÇO INOXIDÁVEL, ENDURECIMENTO POR PRECIPITAÇÃO, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
UNTI, L.F. Kultz et al. Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion. Materials Characterization, v. No 2021, p. 14 , 2021Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2021.111485. Acesso em: 04 nov. 2024.
APA
Unti, L. F. K., Aota, L. S., Jardini, A. L., Tschiptschin, A. P., Sandim, H. R. Z., Jägle, E. A., & Zilnyk, K. D. (2021). Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion. Materials Characterization, No 2021, 14 . doi:10.1016/j.matchar.2021.111485
NLM
Unti LFK, Aota LS, Jardini AL, Tschiptschin AP, Sandim HRZ, Jägle EA, Zilnyk KD. Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion [Internet]. Materials Characterization. 2021 ; No 2021 14 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2021.111485
Vancouver
Unti LFK, Aota LS, Jardini AL, Tschiptschin AP, Sandim HRZ, Jägle EA, Zilnyk KD. Microstructural characterization of 15-5PH stainless steel processed by laser powder-bed fusion [Internet]. Materials Characterization. 2021 ; No 2021 14 .[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2021.111485
Artigo de periodico
In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures (2020)
Callegari, Bruna ; Oliveira, João Pedro; Aristizabal, Katherine ; Coelho, Rodrigo Santiago; Brito, Pedro; Wu, L; Schell, Norbert; Soldera, Flavio; Mücklich, Frank T.; Pinto, Haroldo Cavalcanti
Source: Materials Characterization. Unidade: EESC
Subjects: TITÂNIO, MUDANÇA DE FASE, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALLEGARI, Bruna et al. In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures. Materials Characterization, v. 165, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2020.110400. Acesso em: 04 nov. 2024.
APA
Callegari, B., Oliveira, J. P., Aristizabal, K., Coelho, R. S., Brito, P., Wu, L., et al. (2020). In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures. Materials Characterization, 165. doi:10.1016/j.matchar.2020.110400
NLM
Callegari B, Oliveira JP, Aristizabal K, Coelho RS, Brito P, Wu L, Schell N, Soldera F, Mücklich FT, Pinto HC. In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures [Internet]. Materials Characterization. 2020 ; 165[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2020.110400
Vancouver
Callegari B, Oliveira JP, Aristizabal K, Coelho RS, Brito P, Wu L, Schell N, Soldera F, Mücklich FT, Pinto HC. In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures [Internet]. Materials Characterization. 2020 ; 165[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2020.110400
Artigo de periodico
New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working (2020)
Callegari, Bruna; Oliveira, João Pedro; Coelho, Rodrigo Santiago; Brito, Pedro; Schell, Norbert; Soldera, Flavio; Mücklich, Frank T.; Sadik, Ibrahim; Garcia, Jose; Pinto, Haroldo Cavalcanti
Source: Materials Characterization. Unidade: EESC
Subjects: TITÂNIO, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALLEGARI, Bruna et al. New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working. Materials Characterization, v. 162, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2020.110180. Acesso em: 04 nov. 2024.
APA
Callegari, B., Oliveira, J. P., Coelho, R. S., Brito, P., Schell, N., Soldera, F., et al. (2020). New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working. Materials Characterization, 162. doi:10.1016/j.matchar.2020.110180
NLM
Callegari B, Oliveira JP, Coelho RS, Brito P, Schell N, Soldera F, Mücklich FT, Sadik I, Garcia J, Pinto HC. New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working [Internet]. Materials Characterization. 2020 ; 162[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2020.110180
Vancouver
Callegari B, Oliveira JP, Coelho RS, Brito P, Schell N, Soldera F, Mücklich FT, Sadik I, Garcia J, Pinto HC. New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working [Internet]. Materials Characterization. 2020 ; 162[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2020.110180
Artigo de periodico
Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration (2019)
Campos Neto, Nelson Delfino de; Pereira, Flavio Soares; Antonio, Selma Gutierrez; Yaofeng, Guo; Clarke, Amy J.; Kaufman, Michael J.; Oliveira, Marcelo Falcão de
Source: Materials Characterization. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, VIDROS METÁLICOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, v. 158, p. 1-7, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2019.109932. Acesso em: 04 nov. 2024.
APA
Campos Neto, N. D. de, Pereira, F. S., Antonio, S. G., Yaofeng, G., Clarke, A. J., Kaufman, M. J., & Oliveira, M. F. de. (2019). Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration. Materials Characterization, 158, 1-7. doi:10.1016/j.matchar.2019.109932
NLM
Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
Vancouver
Campos Neto ND de, Pereira FS, Antonio SG, Yaofeng G, Clarke AJ, Kaufman MJ, Oliveira MF de. Phase formation maps in Zr48Cu46.5Al4Nb1.5 bulk metallic glass composites as a function of cooling rate and oxygen concentration [Internet]. Materials Characterization. 2019 ; 158 1-7.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2019.109932
Artigo de periodico
Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning (2019)
Escobar Atehortúa, Julián David; Oliveira, João Pedro; Salvador, Camilo Augusto Fernandes ; Tschiptschin, André Paulo ; Mei, Paulo Roberto; Ramirez, Antonio José
Source: Materials Characterization. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, AÇO INOXIDÁVEL SUPERFERRÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESCOBAR ATEHORTÚA, Julián David et al. Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning. Materials Characterization, v. 158, p. 1-11, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2019.109994. Acesso em: 04 nov. 2024.
APA
Escobar Atehortúa, J. D., Oliveira, J. P., Salvador, C. A. F., Tschiptschin, A. P., Mei, P. R., & Ramirez, A. J. (2019). Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning. Materials Characterization, 158, 1-11. doi:10.1016/j.matchar.2019.109994
NLM
Escobar Atehortúa JD, Oliveira JP, Salvador CAF, Tschiptschin AP, Mei PR, Ramirez AJ. Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning [Internet]. Materials Characterization. 2019 ; 158 1-11.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2019.109994
Vancouver
Escobar Atehortúa JD, Oliveira JP, Salvador CAF, Tschiptschin AP, Mei PR, Ramirez AJ. Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning [Internet]. Materials Characterization. 2019 ; 158 1-11.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2019.109994
Artigo de periodico
Structural vibrational and morphological properties of layered double hydroxides containing Ni2+, Zn2, Al3+ and Zr4+ cations (2017)
Bezerra, Débora M; Rodrigues, João Elias Figueiredo Soares; Assaf, Elisabete Moreira
Source: Materials Characterization. Unidade: IQSC
Assunto: CATÁLISE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEZERRA, Débora M e RODRIGUES, João Elias Figueiredo Soares e ASSAF, Elisabete Moreira. Structural vibrational and morphological properties of layered double hydroxides containing Ni2+, Zn2, Al3+ and Zr4+ cations. Materials Characterization, v. 125, p. 29-36, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2017.01.015. Acesso em: 04 nov. 2024.
APA
Bezerra, D. M., Rodrigues, J. E. F. S., & Assaf, E. M. (2017). Structural vibrational and morphological properties of layered double hydroxides containing Ni2+, Zn2, Al3+ and Zr4+ cations. Materials Characterization, 125, 29-36. doi:10.1016/j.matchar.2017.01.015
NLM
Bezerra DM, Rodrigues JEFS, Assaf EM. Structural vibrational and morphological properties of layered double hydroxides containing Ni2+, Zn2, Al3+ and Zr4+ cations [Internet]. Materials Characterization. 2017 ; 125 29-36.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2017.01.015
Vancouver
Bezerra DM, Rodrigues JEFS, Assaf EM. Structural vibrational and morphological properties of layered double hydroxides containing Ni2+, Zn2, Al3+ and Zr4+ cations [Internet]. Materials Characterization. 2017 ; 125 29-36.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2017.01.015
Artigo de periodico
Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel (2016)
Sicupira, Felipe Lucas; Sandim, Maria José Ramos; Sandim, Hugo Ricardo Zschommler; Santos, Dagoberto Brandão; Renzetti, Reny Angela
Source: Materials Characterization. Unidade: EEL
Subjects: AÇO INOXIDÁVEL AUSTENÍTICO, DIFRAÇÃO POR RAIOS X, MICROSCOPIA ELETRÔNICA DE VARREDURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SICUPIRA, Felipe Lucas et al. Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel. Materials Characterization, v. 15, p. 90-96, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2016.03.023. Acesso em: 04 nov. 2024.
APA
Sicupira, F. L., Sandim, M. J. R., Sandim, H. R. Z., Santos, D. B., & Renzetti, R. A. (2016). Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel. Materials Characterization, 15, 90-96. doi:10.1016/j.matchar.2016.03.023
NLM
Sicupira FL, Sandim MJR, Sandim HRZ, Santos DB, Renzetti RA. Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel [Internet]. Materials Characterization. 2016 ;15 90-96.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2016.03.023
Vancouver
Sicupira FL, Sandim MJR, Sandim HRZ, Santos DB, Renzetti RA. Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel [Internet]. Materials Characterization. 2016 ;15 90-96.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2016.03.023
Artigo de periodico
Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys (2014)
Moraes, Paulo E.L.; Contieri, Rodrigo J.; Lopes, Eder S.N. Lopes; Robin, Alain Robin; Caram, Rubens Caram
Source: Materials Characterization. Unidade: EEL
Subjects: CORROSÃO, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Paulo E.L. et al. Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys. Materials Characterization, v. 96, p. 273–281, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2014.08.014. Acesso em: 04 nov. 2024.
APA
Moraes, P. E. L., Contieri, R. J., Lopes, E. S. N. L., Robin, A. R., & Caram, R. C. (2014). Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys. Materials Characterization, 96, 273–281. doi:10.1016/j.matchar.2014.08.014
NLM
Moraes PEL, Contieri RJ, Lopes ESNL, Robin AR, Caram RC. Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys [Internet]. Materials Characterization. 2014 ; 96 273–281.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2014.08.014
Vancouver
Moraes PEL, Contieri RJ, Lopes ESNL, Robin AR, Caram RC. Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys [Internet]. Materials Characterization. 2014 ; 96 273–281.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2014.08.014
Artigo de periodico
Synthesis and characterization of magnetite nanoparticles coated with lauric acid (2013)
Mamani, J. B.; Costa Filho, Antonio José da ; Cornejo, Daniel Reinaldo ; Vieira, E. D.; Gamarra, Lionel Fernel
Source: Materials Characterization. Unidades: FFCLRP, IF
Subjects: NANOPARTÍCULAS, FÍSICO-QUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAMANI, J. B. et al. Synthesis and characterization of magnetite nanoparticles coated with lauric acid. Materials Characterization, v. 81, p. 28-36, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2013.04.001. Acesso em: 04 nov. 2024.
APA
Mamani, J. B., Costa Filho, A. J. da, Cornejo, D. R., Vieira, E. D., & Gamarra, L. F. (2013). Synthesis and characterization of magnetite nanoparticles coated with lauric acid. Materials Characterization, 81, 28-36. doi:10.1016/j.matchar.2013.04.001
NLM
Mamani JB, Costa Filho AJ da, Cornejo DR, Vieira ED, Gamarra LF. Synthesis and characterization of magnetite nanoparticles coated with lauric acid [Internet]. Materials Characterization. 2013 ; 81 28-36.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2013.04.001
Vancouver
Mamani JB, Costa Filho AJ da, Cornejo DR, Vieira ED, Gamarra LF. Synthesis and characterization of magnetite nanoparticles coated with lauric acid [Internet]. Materials Characterization. 2013 ; 81 28-36.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2013.04.001
Artigo de periodico
Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting (2009)
Martins, Marcelo; Casteletti, Luiz Carlos
Source: Materials Characterization. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, CORROSÃO DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Marcelo e CASTELETTI, Luiz Carlos. Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting. Materials Characterization, v. 60, n. 2, p. 150-155, 2009Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2008.12.010. Acesso em: 04 nov. 2024.
APA
Martins, M., & Casteletti, L. C. (2009). Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting. Materials Characterization, 60( 2), 150-155. doi:10.1016/j.matchar.2008.12.010
NLM
Martins M, Casteletti LC. Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting [Internet]. Materials Characterization. 2009 ; 60( 2): 150-155.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2008.12.010
Vancouver
Martins M, Casteletti LC. Microstructural characteristics and corrosion behavior of a super duplex stainless steel casting [Internet]. Materials Characterization. 2009 ; 60( 2): 150-155.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2008.12.010
Artigo de periodico
Sigma phase morphologies in cast and aged super duplex stainless steel (2009)
Martins, Marcelo; Casteletti, Luiz Carlos
Source: Materials Characterization. Unidade: EESC
Subjects: MICROSCOPIA ELETRÔNICA, MICROSCÓPIO ÓTICO, TRATAMENTO TÉRMICO, METAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Marcelo e CASTELETTI, Luiz Carlos. Sigma phase morphologies in cast and aged super duplex stainless steel. Materials Characterization, v. 60, n. 8, p. 792-795, 2009Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2009.01.005. Acesso em: 04 nov. 2024.
APA
Martins, M., & Casteletti, L. C. (2009). Sigma phase morphologies in cast and aged super duplex stainless steel. Materials Characterization, 60( 8), 792-795. doi:10.1016/j.matchar.2009.01.005
NLM
Martins M, Casteletti LC. Sigma phase morphologies in cast and aged super duplex stainless steel [Internet]. Materials Characterization. 2009 ; 60( 8): 792-795.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2009.01.005
Vancouver
Martins M, Casteletti LC. Sigma phase morphologies in cast and aged super duplex stainless steel [Internet]. Materials Characterization. 2009 ; 60( 8): 792-795.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2009.01.005
Artigo de periodico
Precipitation of Laves phase in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel (2008)
Andrade, Thiago Fontoura de ; Kliauga, Andrea Madeira ; Plaut, Ronald Lesley ; Padilha, Angelo Fernando
Source: Materials Characterization. Unidade: EP
Subjects: AÇO INOXIDÁVEL SUPERFERRÍTICO, PRECIPITAÇÃO, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANDRADE, Thiago Fontoura de et al. Precipitation of Laves phase in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel. Materials Characterization, v. 59, n. 5, p. 503-507, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2007.03.006. Acesso em: 04 nov. 2024.
APA
Andrade, T. F. de, Kliauga, A. M., Plaut, R. L., & Padilha, A. F. (2008). Precipitation of Laves phase in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel. Materials Characterization, 59( 5), 503-507. doi:10.1016/j.matchar.2007.03.006
NLM
Andrade TF de, Kliauga AM, Plaut RL, Padilha AF. Precipitation of Laves phase in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel [Internet]. Materials Characterization. 2008 ; 59( 5): 503-507.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2007.03.006
Vancouver
Andrade TF de, Kliauga AM, Plaut RL, Padilha AF. Precipitation of Laves phase in a 28%Cr-4%Ni-2%Mo-Nb superferritic stainless steel [Internet]. Materials Characterization. 2008 ; 59( 5): 503-507.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2007.03.006
Artigo de periodico
Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600°C (2008)
Terada, Maysa ; Escriba Villanueva, Doris Maribel ; Costa, Isolda ; Materna-Morris, Edeltraud; Padilha, Angelo Fernando
Source: Materials Characterization. Unidades: EP, IPEN
Subjects: CORROSÃO DOS MATERIAIS, AÇO INOXIDÁVEL, ELETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TERADA, Maysa et al. Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600°C. Materials Characterization, v. 59, n. ju 2008, p. 663-668, 2008Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2007.05.017. Acesso em: 04 nov. 2024.
APA
Terada, M., Escriba Villanueva, D. M., Costa, I., Materna-Morris, E., & Padilha, A. F. (2008). Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600°C. Materials Characterization, 59(ju 2008), 663-668. doi:10.1016/j.matchar.2007.05.017
NLM
Terada M, Escriba Villanueva DM, Costa I, Materna-Morris E, Padilha AF. Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600°C [Internet]. Materials Characterization. 2008 ; 59(ju 2008): 663-668.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2007.05.017
Vancouver
Terada M, Escriba Villanueva DM, Costa I, Materna-Morris E, Padilha AF. Investigation on the intergranular corrosion resistance of the AISI 316L(N) stainless steel after long time creep testing at 600°C [Internet]. Materials Characterization. 2008 ; 59(ju 2008): 663-668.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2007.05.017
Artigo de periodico
Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds (2007)
Bose Filho, Waldek Wladimir; Carvalho, André Luis Moreira de; Strangwood, Martin
Source: Materials Characterization. Unidade: EESC
Assunto: SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BOSE FILHO, Waldek Wladimir e CARVALHO, André Luis Moreira de e STRANGWOOD, Martin. Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds. Materials Characterization, v. 58, n. Ja 2007, p. 29-39, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2006.03.004. Acesso em: 04 nov. 2024.
APA
Bose Filho, W. W., Carvalho, A. L. M. de, & Strangwood, M. (2007). Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds. Materials Characterization, 58( Ja 2007), 29-39. doi:10.1016/j.matchar.2006.03.004
NLM
Bose Filho WW, Carvalho ALM de, Strangwood M. Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds [Internet]. Materials Characterization. 2007 ; 58( Ja 2007): 29-39.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2006.03.004
Vancouver
Bose Filho WW, Carvalho ALM de, Strangwood M. Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds [Internet]. Materials Characterization. 2007 ; 58( Ja 2007): 29-39.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2006.03.004
Artigo de periodico
Energetics and structural properties of adsorbed atoms and molecules on silicon-doped carbon nanotubes (2003)
Fagan, Solange Binotto; Mota, R; Baierle, Rogerio Jose; Silva, Antonio Jose Roque da; Fazzio, Adalberto
Source: Materials Characterization. Unidade: IF
Subjects: ESTRUTURA ELETRÔNICA, PROPRIEDADES DOS MATERIAIS, NANOTECNOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FAGAN, Solange Binotto et al. Energetics and structural properties of adsorbed atoms and molecules on silicon-doped carbon nanotubes. Materials Characterization, v. 50, n. 2-3, p. 183-187, 2003Tradução . . Disponível em: https://doi.org/10.1016/s1044-5803(03)00087-1. Acesso em: 04 nov. 2024.
APA
Fagan, S. B., Mota, R., Baierle, R. J., Silva, A. J. R. da, & Fazzio, A. (2003). Energetics and structural properties of adsorbed atoms and molecules on silicon-doped carbon nanotubes. Materials Characterization, 50( 2-3), 183-187. doi:10.1016/s1044-5803(03)00087-1
NLM
Fagan SB, Mota R, Baierle RJ, Silva AJR da, Fazzio A. Energetics and structural properties of adsorbed atoms and molecules on silicon-doped carbon nanotubes [Internet]. Materials Characterization. 2003 ; 50( 2-3): 183-187.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/s1044-5803(03)00087-1
Vancouver
Fagan SB, Mota R, Baierle RJ, Silva AJR da, Fazzio A. Energetics and structural properties of adsorbed atoms and molecules on silicon-doped carbon nanotubes [Internet]. Materials Characterization. 2003 ; 50( 2-3): 183-187.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/s1044-5803(03)00087-1
Artigo de periodico-carta/editorial
Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS (2003)
Solórzano, Guillermo (Editor); Freire Junior, Fernando Lázaro (Editor); Soares, Glória Almeida (Editor); Souza, Patrícia Lustoza (Editor); Faria, Roberto Mendonça (Editor) ; Burke, M. G. (Editor)
Source: Materials Characterization. Unidade: IFSC
Assunto: MATERIAIS (PESQUISA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS. Materials Characterization. New York: Instituto de Física de São Carlos, Universidade de São Paulo. . Acesso em: 04 nov. 2024. , 2003
APA
Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS. (2003). Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS. Materials Characterization. New York: Instituto de Física de São Carlos, Universidade de São Paulo.
NLM
Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS. Materials Characterization. 2003 ; 50( 2/3): 93.[citado 2024 nov. 04 ]
Vancouver
Introduction: inaugural meeting of the Brazilian Society for Materials Research MRS. Materials Characterization. 2003 ; 50( 2/3): 93.[citado 2024 nov. 04 ]
Artigo de periodico
Backscattered electron microscopy technique enhancing stretch zone width imaging for initiation fracture toughness measurements (2003)
Tarpani, José Ricardo; Bose Filho, Waldek Wladimir; Spinelli, Dirceu
Source: Materials Characterization. Unidade: EESC
Subjects: AÇO DE ALTA RESISTÊNCIA, MICROSCOPIA ELETRÔNICA, TENACIDADE DOS MATERIAIS, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TARPANI, José Ricardo e BOSE FILHO, Waldek Wladimir e SPINELLI, Dirceu. Backscattered electron microscopy technique enhancing stretch zone width imaging for initiation fracture toughness measurements. Materials Characterization, v. 51, n. 2-3, p. 159-170, 2003Tradução . . Disponível em: https://doi.org/10.1016/j.matchar.2003.10.009. Acesso em: 04 nov. 2024.
APA
Tarpani, J. R., Bose Filho, W. W., & Spinelli, D. (2003). Backscattered electron microscopy technique enhancing stretch zone width imaging for initiation fracture toughness measurements. Materials Characterization, 51( 2-3), 159-170. doi:10.1016/j.matchar.2003.10.009
NLM
Tarpani JR, Bose Filho WW, Spinelli D. Backscattered electron microscopy technique enhancing stretch zone width imaging for initiation fracture toughness measurements [Internet]. Materials Characterization. 2003 ; 51( 2-3): 159-170.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2003.10.009
Vancouver
Tarpani JR, Bose Filho WW, Spinelli D. Backscattered electron microscopy technique enhancing stretch zone width imaging for initiation fracture toughness measurements [Internet]. Materials Characterization. 2003 ; 51( 2-3): 159-170.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matchar.2003.10.009

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration