ReP USP - Resultado da busca

Artigo de periodico
Insertion of silicon carbide as cutting element in ecological fickerts for dimension stone polishing (2020)
Almeida, Phillipe Fernandes de ; Ponciano, Victor Moza; Silveira, Leonardo Luiz Lyrio da; Sichieri, Eduvaldo Paulo
Fonte: Key Engineering Materials. Unidade: IAU
Assuntos: MATERIAIS DE CONSTRUÇÃO, RESINAS, PEDRAS NATURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Phillipe Fernandes de et al. Insertion of silicon carbide as cutting element in ecological fickerts for dimension stone polishing. Key Engineering Materials, v. 848, p. 28-34, 2020Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.848.28. Acesso em: 08 out. 2025.
APA
Almeida, P. F. de, Ponciano, V. M., Silveira, L. L. L. da, & Sichieri, E. P. (2020). Insertion of silicon carbide as cutting element in ecological fickerts for dimension stone polishing. Key Engineering Materials, 848, 28-34. doi:10.4028/www.scientific.net/KEM.848.28
NLM
Almeida PF de, Ponciano VM, Silveira LLL da, Sichieri EP. Insertion of silicon carbide as cutting element in ecological fickerts for dimension stone polishing [Internet]. Key Engineering Materials. 2020 ; 848 28-34.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.848.28
Vancouver
Almeida PF de, Ponciano VM, Silveira LLL da, Sichieri EP. Insertion of silicon carbide as cutting element in ecological fickerts for dimension stone polishing [Internet]. Key Engineering Materials. 2020 ; 848 28-34.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.848.28
Trabalho de evento-anais periodico
Evaluation of calcined clay lightweight aggregates made with alkali activators (2016)
Santis, Bruno Carlos de; Rossignolo, João Adriano; Gavioli, Leticia Missiatto; Morelli, Márcio Raymundo
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: FZEA
Assuntos: MATERIAIS AGLOMERADOS, ARGILAS, ABSORÇÃO, MATERIAIS CERÂMICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTIS, Bruno Carlos de et al. Evaluation of calcined clay lightweight aggregates made with alkali activators. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.163. Acesso em: 08 out. 2025. , 2016
APA
Santis, B. C. de, Rossignolo, J. A., Gavioli, L. M., & Morelli, M. R. (2016). Evaluation of calcined clay lightweight aggregates made with alkali activators. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.163
NLM
Santis BC de, Rossignolo JA, Gavioli LM, Morelli MR. Evaluation of calcined clay lightweight aggregates made with alkali activators [Internet]. Key Engineering Materials. 2016 ; 668 163-171.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.163
Vancouver
Santis BC de, Rossignolo JA, Gavioli LM, Morelli MR. Evaluation of calcined clay lightweight aggregates made with alkali activators [Internet]. Key Engineering Materials. 2016 ; 668 163-171.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.163
Trabalho de evento-anais periodico
Study of the potential employment of Malvaceae Species in composites materials (2016)
Guimarães, Bárbara Maria Gama; Marín, Diana Cayuela; Zonatti, Welton Fernando; Mantovani, Waldir; Relvas, Cátia; Cunha, Fernando; Fangueiro, Raul; Savastano Júnior, Holmer; Baruque Ramos, Julia
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidades: FZEA, EACH
Assuntos: FIBRAS VEGETAIS, MATERIAIS COMPÓSITOS DE FIBRAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUIMARÃES, Bárbara Maria Gama et al. Study of the potential employment of Malvaceae Species in composites materials. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.75. Acesso em: 08 out. 2025. , 2016
APA
Guimarães, B. M. G., Marín, D. C., Zonatti, W. F., Mantovani, W., Relvas, C., Cunha, F., et al. (2016). Study of the potential employment of Malvaceae Species in composites materials. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.75
NLM
Guimarães BMG, Marín DC, Zonatti WF, Mantovani W, Relvas C, Cunha F, Fangueiro R, Savastano Júnior H, Baruque Ramos J. Study of the potential employment of Malvaceae Species in composites materials [Internet]. Key Engineering Materials. 2016 ; 668 75-85.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.75
Vancouver
Guimarães BMG, Marín DC, Zonatti WF, Mantovani W, Relvas C, Cunha F, Fangueiro R, Savastano Júnior H, Baruque Ramos J. Study of the potential employment of Malvaceae Species in composites materials [Internet]. Key Engineering Materials. 2016 ; 668 75-85.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.75
Trabalho de evento-anais periodico
Use of ceramic sanitaryware as an alternative for the development of new sustainable binders (2016)
Reig, Lucía; Borrachero, María Victoria; Monzó, José María; Savastano Júnior, Holmer; Tashima, Mauro Mitsuuchi; Payá, Jordi
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: FZEA
Assuntos: MATERIAIS CERÂMICOS, POZOLANAS, LOUÇA SANITÁRIA, RESÍDUOS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIG, Lucía et al. Use of ceramic sanitaryware as an alternative for the development of new sustainable binders. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.172. Acesso em: 08 out. 2025. , 2016
APA
Reig, L., Borrachero, M. V., Monzó, J. M., Savastano Júnior, H., Tashima, M. M., & Payá, J. (2016). Use of ceramic sanitaryware as an alternative for the development of new sustainable binders. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.172
NLM
Reig L, Borrachero MV, Monzó JM, Savastano Júnior H, Tashima MM, Payá J. Use of ceramic sanitaryware as an alternative for the development of new sustainable binders [Internet]. Key Engineering Materials. 2016 ; 668 172-180.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.172
Vancouver
Reig L, Borrachero MV, Monzó JM, Savastano Júnior H, Tashima MM, Payá J. Use of ceramic sanitaryware as an alternative for the development of new sustainable binders [Internet]. Key Engineering Materials. 2016 ; 668 172-180.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.172
Trabalho de evento-anais periodico
Cementitious composites reinforced with kraft pulping waste (2016)
Silva, Danillo Wisky; Mendes, Rafael Farinassi; Freire, Cecília; Vilela, Breno Lima; Tonoli, Gustavo Henrique Denzin; Teixeira, Ronaldo Soares; Santos, Sérgio Francisco dos; Savastano Júnior, Holmer
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: FZEA
Assuntos: FIBROCIMENTO, EXTRUSÃO, POLPA DE MADEIRA, EUCALIPTO, FIBRAS VEGETAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Danillo Wisky et al. Cementitious composites reinforced with kraft pulping waste. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.390. Acesso em: 08 out. 2025. , 2016
APA
Silva, D. W., Mendes, R. F., Freire, C., Vilela, B. L., Tonoli, G. H. D., Teixeira, R. S., et al. (2016). Cementitious composites reinforced with kraft pulping waste. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.390
NLM
Silva DW, Mendes RF, Freire C, Vilela BL, Tonoli GHD, Teixeira RS, Santos SF dos, Savastano Júnior H. Cementitious composites reinforced with kraft pulping waste [Internet]. Key Engineering Materials. 2016 ; 668 390-398.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.390
Vancouver
Silva DW, Mendes RF, Freire C, Vilela BL, Tonoli GHD, Teixeira RS, Santos SF dos, Savastano Júnior H. Cementitious composites reinforced with kraft pulping waste [Internet]. Key Engineering Materials. 2016 ; 668 390-398.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.390
Artigo de periodico
Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions (2016)
Torres, Marcelo A.S.; Cindra, Fonseca M. P.; Harada, D.T.; Baptista, Carlos Antônio Reis Pereira
Fonte: Key Engineering Materials. Nome do evento: International Conference on Fracture and Damage Mechanics.. Unidade: EEL
Assuntos: FADIGA DOS MATERIAIS, MECÂNICA DA FRATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TORRES, Marcelo A.S. et al. Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions. Key Engineering Materials, v. 713, p. 30-33, 2016Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/kem.713.30. Acesso em: 08 out. 2025.
APA
Torres, M. A. S., Cindra, F. M. P., Harada, D. T., & Baptista, C. A. R. P. (2016). Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions. Key Engineering Materials, 713, 30-33. doi:10.4028/www.scientific.net/kem.713.30
NLM
Torres MAS, Cindra FMP, Harada DT, Baptista CARP. Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions [Internet]. Key Engineering Materials. 2016 ;713 30-33.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/kem.713.30
Vancouver
Torres MAS, Cindra FMP, Harada DT, Baptista CARP. Effect of shot peening on fatigue behavior of AISI 4340 in different loading conditions [Internet]. Key Engineering Materials. 2016 ;713 30-33.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/kem.713.30
Trabalho de evento-anais periodico
Thermal insulation particleboards made with wastes from wood and tire rubber (2016)
Bertolini, Marília da Silva; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: EESC
Assuntos: MADEIRA, PNEUS, ISOLAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BERTOLINI, Marília da Silva e CHRISTOFORO, André Luis e LAHR, Francisco Antonio Rocco. Thermal insulation particleboards made with wastes from wood and tire rubber. Key Engineering Materials. Pfaffikon: Escola de Engenharia de São Carlos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.263. Acesso em: 08 out. 2025. , 2016
APA
Bertolini, M. da S., Christoforo, A. L., & Lahr, F. A. R. (2016). Thermal insulation particleboards made with wastes from wood and tire rubber. Key Engineering Materials. Pfaffikon: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.263
NLM
Bertolini M da S, Christoforo AL, Lahr FAR. Thermal insulation particleboards made with wastes from wood and tire rubber [Internet]. Key Engineering Materials. 2016 ; 668 263-269.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.263
Vancouver
Bertolini M da S, Christoforo AL, Lahr FAR. Thermal insulation particleboards made with wastes from wood and tire rubber [Internet]. Key Engineering Materials. 2016 ; 668 263-269.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.263
Trabalho de evento-anais periodico
Macro, micro and nanoscale bamboo fiber as a potential reinforcement for composites (2016)
Correia, Viviane da Costa; Siqueira, Fabíola Maria; Dias, Rafael Donizetti; Savastano Júnior, Holmer
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: FZEA
Assuntos: BAMBU, CELULOSE, MATERIAIS COMPÓSITOS DE FIBRAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CORREIA, Viviane da Costa et al. Macro, micro and nanoscale bamboo fiber as a potential reinforcement for composites. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.11. Acesso em: 08 out. 2025. , 2016
APA
Correia, V. da C., Siqueira, F. M., Dias, R. D., & Savastano Júnior, H. (2016). Macro, micro and nanoscale bamboo fiber as a potential reinforcement for composites. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.11
NLM
Correia V da C, Siqueira FM, Dias RD, Savastano Júnior H. Macro, micro and nanoscale bamboo fiber as a potential reinforcement for composites [Internet]. Key Engineering Materials. 2016 ; 668 11-16.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.11
Vancouver
Correia V da C, Siqueira FM, Dias RD, Savastano Júnior H. Macro, micro and nanoscale bamboo fiber as a potential reinforcement for composites [Internet]. Key Engineering Materials. 2016 ; 668 11-16.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.11
Artigo de periodico
Localized corrosion resistance of dissimilar aluminum alloys joined by friction stir welding (FSW) (2016)
Bugarin, Aline de Fatima Santos; Queiroz, Fernanda Martins ; Terada, Maysa ; Melo, Hercílio Gomes de ; Costa, Isolda
Fonte: Key Engineering Materials. Unidades: EP, IPEN
Assuntos: CORROSÃO, ALUMÍNIO, LIGAS NÃO METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUGARIN, Aline de Fatima Santos et al. Localized corrosion resistance of dissimilar aluminum alloys joined by friction stir welding (FSW). Key Engineering Materials, v. 710, p. 41-46, 2016Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.710.41. Acesso em: 08 out. 2025.
APA
Bugarin, A. de F. S., Queiroz, F. M., Terada, M., Melo, H. G. de, & Costa, I. (2016). Localized corrosion resistance of dissimilar aluminum alloys joined by friction stir welding (FSW). Key Engineering Materials, 710, 41-46. doi:10.4028/www.scientific.net/KEM.710.41
NLM
Bugarin A de FS, Queiroz FM, Terada M, Melo HG de, Costa I. Localized corrosion resistance of dissimilar aluminum alloys joined by friction stir welding (FSW) [Internet]. Key Engineering Materials. 2016 ; 710 41-46.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.710.41
Vancouver
Bugarin A de FS, Queiroz FM, Terada M, Melo HG de, Costa I. Localized corrosion resistance of dissimilar aluminum alloys joined by friction stir welding (FSW) [Internet]. Key Engineering Materials. 2016 ; 710 41-46.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.710.41
Trabalho de evento-anais periodico
Ternary blended cementitious matrix for vegetable fiber reinforced composites (2016)
Mármol, Gonzalo; Savastano Júnior, Holmer; Bonilla, Mercedes; Borrachero, M. V; Monzó, J; Soriano, Lourdes; Payá, Jordi
Fonte: Key Engineering Materials. Nome do evento: International Conference on Non-Conventional Materials and Technologies - NOCMAT. Unidade: FZEA
Assuntos: MATERIAIS COMPÓSITOS DE FIBRAS, FIBRAS VEGETAIS, CIMENTO REFORÇADO COM FIBRAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MÁRMOL, Gonzalo et al. Ternary blended cementitious matrix for vegetable fiber reinforced composites. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.668.3. Acesso em: 08 out. 2025. , 2016
APA
Mármol, G., Savastano Júnior, H., Bonilla, M., Borrachero, M. V., Monzó, J., Soriano, L., & Payá, J. (2016). Ternary blended cementitious matrix for vegetable fiber reinforced composites. Key Engineering Materials. Pfaffikon: Faculdade de Zootecnia e Engenharia de Alimentos, Universidade de São Paulo. doi:10.4028/www.scientific.net/KEM.668.3
NLM
Mármol G, Savastano Júnior H, Bonilla M, Borrachero MV, Monzó J, Soriano L, Payá J. Ternary blended cementitious matrix for vegetable fiber reinforced composites [Internet]. Key Engineering Materials. 2016 ; 668 3-10.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.3
Vancouver
Mármol G, Savastano Júnior H, Bonilla M, Borrachero MV, Monzó J, Soriano L, Payá J. Ternary blended cementitious matrix for vegetable fiber reinforced composites [Internet]. Key Engineering Materials. 2016 ; 668 3-10.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.668.3
Artigo de periodico
Corrosion Protection of AA2524 - T3 Anodized in Tartaric - Sulfuric Acid Bath and Protected with Hybrid Sol - Gel Coating (2016)
Costenaro, Hellen Sonego; Queiroz, Fernanda Martins ; Terada, Maysa ; Olivier, Marie-Georges Marjorie ; Costa, Isolda ; Melo, Hercílio Gomes de
Fonte: Key Engineering Materials. Unidades: EP, IPEN
Assuntos: CORROSÃO, LIGAS NÃO METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTENARO, Hellen Sonego et al. Corrosion Protection of AA2524 - T3 Anodized in Tartaric - Sulfuric Acid Bath and Protected with Hybrid Sol - Gel Coating. Key Engineering Materials, v. 710, p. 210-215, 2016Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/kem.710.210. Acesso em: 08 out. 2025.
APA
Costenaro, H. S., Queiroz, F. M., Terada, M., Olivier, M. -G. M., Costa, I., & Melo, H. G. de. (2016). Corrosion Protection of AA2524 - T3 Anodized in Tartaric - Sulfuric Acid Bath and Protected with Hybrid Sol - Gel Coating. Key Engineering Materials, 710, 210-215. doi:10.4028/www.scientific.net/kem.710.210
NLM
Costenaro HS, Queiroz FM, Terada M, Olivier M-GM, Costa I, Melo HG de. Corrosion Protection of AA2524 - T3 Anodized in Tartaric - Sulfuric Acid Bath and Protected with Hybrid Sol - Gel Coating [Internet]. Key Engineering Materials. 2016 ; 710 210-215.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/kem.710.210
Vancouver
Costenaro HS, Queiroz FM, Terada M, Olivier M-GM, Costa I, Melo HG de. Corrosion Protection of AA2524 - T3 Anodized in Tartaric - Sulfuric Acid Bath and Protected with Hybrid Sol - Gel Coating [Internet]. Key Engineering Materials. 2016 ; 710 210-215.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/kem.710.210
Artigo de periodico
Development and characterization of hydroxyapatite containing silver by precipitation and immersion methods (2015)
Santos, M. F.; Vercik, Luci Cristina de Oliveira; Vercik, Andrés; Rigo, Eliana Cristina da Silva
Fonte: Key Engineering Materials. Unidade: FZEA
Assuntos: HIDROXIAPATITA, PRATA, BIOMATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, M. F. et al. Development and characterization of hydroxyapatite containing silver by precipitation and immersion methods. Key Engineering Materials, v. 631, p. 216-221, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.631.216. Acesso em: 08 out. 2025.
APA
Santos, M. F., Vercik, L. C. de O., Vercik, A., & Rigo, E. C. da S. (2015). Development and characterization of hydroxyapatite containing silver by precipitation and immersion methods. Key Engineering Materials, 631, 216-221. doi:10.4028/www.scientific.net/KEM.631.216
NLM
Santos MF, Vercik LC de O, Vercik A, Rigo EC da S. Development and characterization of hydroxyapatite containing silver by precipitation and immersion methods [Internet]. Key Engineering Materials. 2015 ; 631 216-221.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.631.216
Vancouver
Santos MF, Vercik LC de O, Vercik A, Rigo EC da S. Development and characterization of hydroxyapatite containing silver by precipitation and immersion methods [Internet]. Key Engineering Materials. 2015 ; 631 216-221.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.631.216
Artigo de periodico
Particleboards with agricultural wastes: sugar cane bagasse and reforestation wood (2014)
Castro Junior, Sérgio Luis de; Garzón, Nubia; Williams, Daniel; Guesso, Flávio Luis; Savastano Júnior, Holmer; Rossignolo, João Adriano; Fiorelli, Juliano
Fonte: Key Engineering Materials. Unidade: FZEA
Assuntos: PAINÉIS, BAGAÇOS, CANA-DE-AÇÚCAR, REFLORESTAMENTO, CONSTRUÇÃO CIVIL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTRO JUNIOR, Sérgio Luis de et al. Particleboards with agricultural wastes: sugar cane bagasse and reforestation wood. Key Engineering Materials, v. 600, p. 667-676, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.600.667. Acesso em: 08 out. 2025.
APA
Castro Junior, S. L. de, Garzón, N., Williams, D., Guesso, F. L., Savastano Júnior, H., Rossignolo, J. A., & Fiorelli, J. (2014). Particleboards with agricultural wastes: sugar cane bagasse and reforestation wood. Key Engineering Materials, 600, 667-676. doi:10.4028/www.scientific.net/KEM.600.667
NLM
Castro Junior SL de, Garzón N, Williams D, Guesso FL, Savastano Júnior H, Rossignolo JA, Fiorelli J. Particleboards with agricultural wastes: sugar cane bagasse and reforestation wood [Internet]. Key Engineering Materials. 2014 ; 600 667-676.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.667
Vancouver
Castro Junior SL de, Garzón N, Williams D, Guesso FL, Savastano Júnior H, Rossignolo JA, Fiorelli J. Particleboards with agricultural wastes: sugar cane bagasse and reforestation wood [Internet]. Key Engineering Materials. 2014 ; 600 667-676.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.667
Artigo de periodico
Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix (2014)
Marques, Maria Gorett dos Santos; Melo Filho, João de Almeida; Molina, Julio Cesar ; Toledo Filho, Romildo Dias; Vasconcelos, Raimundo Pereira de; Calil Júnior, Carlito
Fonte: Key Engineering Materials. Unidade: EESC
Assuntos: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS (SIMULAÇÃO NUMÉRICA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Maria Gorett dos Santos et al. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix. Key Engineering Materials, v. 600, p. 460-468, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.600.460. Acesso em: 08 out. 2025.
APA
Marques, M. G. dos S., Melo Filho, J. de A., Molina, J. C., Toledo Filho, R. D., Vasconcelos, R. P. de, & Calil Júnior, C. (2014). Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix. Key Engineering Materials, 600, 460-468. doi:10.4028/www.scientific.net/KEM.600.460
NLM
Marques MG dos S, Melo Filho J de A, Molina JC, Toledo Filho RD, Vasconcelos RP de, Calil Júnior C. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix [Internet]. Key Engineering Materials. 2014 ; 600 460-468.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.460
Vancouver
Marques MG dos S, Melo Filho J de A, Molina JC, Toledo Filho RD, Vasconcelos RP de, Calil Júnior C. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix [Internet]. Key Engineering Materials. 2014 ; 600 460-468.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.460
Artigo de periodico
Study of the technical feasibility and design of a mini head screw extruder applied to filament deposition in desktop 3-D printer (2014)
Silveira, Zilda de Castro ; Freitas, Matheus Stoshy de; Inforçatti Neto, Paulo; Noritomi, Pedro Yoshito; Silva, Jorge Vicente Lopes da
Fonte: Key Engineering Materials. Unidade: EESC
Assuntos: IMPRESSORA, IMAGEM 3D, DESIGN (DESENVOLVIMENTO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVEIRA, Zilda de Castro et al. Study of the technical feasibility and design of a mini head screw extruder applied to filament deposition in desktop 3-D printer. Key Engineering Materials, v. 572, p. 151-154, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.572.151. Acesso em: 08 out. 2025.
APA
Silveira, Z. de C., Freitas, M. S. de, Inforçatti Neto, P., Noritomi, P. Y., & Silva, J. V. L. da. (2014). Study of the technical feasibility and design of a mini head screw extruder applied to filament deposition in desktop 3-D printer. Key Engineering Materials, 572, 151-154. doi:10.4028/www.scientific.net/KEM.572.151
NLM
Silveira Z de C, Freitas MS de, Inforçatti Neto P, Noritomi PY, Silva JVL da. Study of the technical feasibility and design of a mini head screw extruder applied to filament deposition in desktop 3-D printer [Internet]. Key Engineering Materials. 2014 ; 572 151-154.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.572.151
Vancouver
Silveira Z de C, Freitas MS de, Inforçatti Neto P, Noritomi PY, Silva JVL da. Study of the technical feasibility and design of a mini head screw extruder applied to filament deposition in desktop 3-D printer [Internet]. Key Engineering Materials. 2014 ; 572 151-154.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.572.151
Artigo de periodico
BEM and tangent operator technique applied to analysis of contact problems (2014)
Cordeiro, Sergio Gustavo Ferreira; Leonel, Edson Denner
Fonte: Key Engineering Materials. Unidade: EESC
Assuntos: MÉTODO DOS ELEMENTOS DE CONTORNO, FRICÇÃO, OPERADORES (TÉCNICAS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CORDEIRO, Sergio Gustavo Ferreira e LEONEL, Edson Denner. BEM and tangent operator technique applied to analysis of contact problems. Key Engineering Materials, v. 618, p. 151-177, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.618.151. Acesso em: 08 out. 2025.
APA
Cordeiro, S. G. F., & Leonel, E. D. (2014). BEM and tangent operator technique applied to analysis of contact problems. Key Engineering Materials, 618, 151-177. doi:10.4028/www.scientific.net/KEM.618.151
NLM
Cordeiro SGF, Leonel ED. BEM and tangent operator technique applied to analysis of contact problems [Internet]. Key Engineering Materials. 2014 ; 618 151-177.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.618.151
Vancouver
Cordeiro SGF, Leonel ED. BEM and tangent operator technique applied to analysis of contact problems [Internet]. Key Engineering Materials. 2014 ; 618 151-177.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.618.151
Artigo de periodico
New process for peanut husks panels: incorporation of castor oil polyrethane adhesive and different particle sizes (2014)
Gatani, Mariana Pilar; Granero, Victoria; Medina, Juan Carlos; Fiorelli, Juliano; Lerda, Josefina; Sipowicz, Eugenia; Kreiker, Jerónimo
Fonte: Key Engineering Materials. Unidade: FZEA
Assuntos: PAINÉIS, RECICLAGEM DE RESÍDUOS URBANOS, CONSTRUÇÃO CIVIL, CASCAS (PLANTA), MAMONA, AMENDOIM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GATANI, Mariana Pilar et al. New process for peanut husks panels: incorporation of castor oil polyrethane adhesive and different particle sizes. Key Engineering Materials, v. 600, p. 452-459, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.600.452. Acesso em: 08 out. 2025.
APA
Gatani, M. P., Granero, V., Medina, J. C., Fiorelli, J., Lerda, J., Sipowicz, E., & Kreiker, J. (2014). New process for peanut husks panels: incorporation of castor oil polyrethane adhesive and different particle sizes. Key Engineering Materials, 600, 452-459. doi:10.4028/www.scientific.net/KEM.600.452
NLM
Gatani MP, Granero V, Medina JC, Fiorelli J, Lerda J, Sipowicz E, Kreiker J. New process for peanut husks panels: incorporation of castor oil polyrethane adhesive and different particle sizes [Internet]. Key Engineering Materials. 2014 ; 600 452-459.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.452
Vancouver
Gatani MP, Granero V, Medina JC, Fiorelli J, Lerda J, Sipowicz E, Kreiker J. New process for peanut husks panels: incorporation of castor oil polyrethane adhesive and different particle sizes [Internet]. Key Engineering Materials. 2014 ; 600 452-459.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.452
Artigo de periodico
Comparative study between coefficient of dynamic friction and slab surface roughness of Brazilian siliceous dimension stones (2013)
Ribeiro, Rogério Pinto ; Paraguassu, Antenor Braga ; Moreiras, Sérgio Trajano Franco
Fonte: Key Engineering Materials. Unidade: EESC
Assuntos: ABRASÃO, ROCHAS ORNAMENTAIS, RUGOSIDADE SUPERFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Rogério Pinto e PARAGUASSU, Antenor Braga e MOREIRAS, Sérgio Trajano Franco. Comparative study between coefficient of dynamic friction and slab surface roughness of Brazilian siliceous dimension stones. Key Engineering Materials, v. 548, p. 65-71, 2013Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.548.65. Acesso em: 08 out. 2025.
APA
Ribeiro, R. P., Paraguassu, A. B., & Moreiras, S. T. F. (2013). Comparative study between coefficient of dynamic friction and slab surface roughness of Brazilian siliceous dimension stones. Key Engineering Materials, 548, 65-71. doi:10.4028/www.scientific.net/KEM.548.65
NLM
Ribeiro RP, Paraguassu AB, Moreiras STF. Comparative study between coefficient of dynamic friction and slab surface roughness of Brazilian siliceous dimension stones [Internet]. Key Engineering Materials. 2013 ; 548 65-71.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.548.65
Vancouver
Ribeiro RP, Paraguassu AB, Moreiras STF. Comparative study between coefficient of dynamic friction and slab surface roughness of Brazilian siliceous dimension stones [Internet]. Key Engineering Materials. 2013 ; 548 65-71.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.548.65
Artigo de periodico
Influence of the mineralogical and mortar components on the adherence of some "granites" (2013)
Nogami, Lizandra; Paraguassu, Antenor Braga ; Rodrigues, José Eduardo; Ribeiro, Rogério Pinto
Fonte: Key Engineering Materials. Unidade: EESC
Assuntos: GRANITO, MINERALOGIA, ARGAMASSA, ROCHAS ORNAMENTAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NOGAMI, Lizandra et al. Influence of the mineralogical and mortar components on the adherence of some "granites". Key Engineering Materials, v. 548, p. 267-274, 2013Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.548.267. Acesso em: 08 out. 2025.
APA
Nogami, L., Paraguassu, A. B., Rodrigues, J. E., & Ribeiro, R. P. (2013). Influence of the mineralogical and mortar components on the adherence of some "granites". Key Engineering Materials, 548, 267-274. doi:10.4028/www.scientific.net/KEM.548.267
NLM
Nogami L, Paraguassu AB, Rodrigues JE, Ribeiro RP. Influence of the mineralogical and mortar components on the adherence of some "granites" [Internet]. Key Engineering Materials. 2013 ; 548 267-274.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.548.267
Vancouver
Nogami L, Paraguassu AB, Rodrigues JE, Ribeiro RP. Influence of the mineralogical and mortar components on the adherence of some "granites" [Internet]. Key Engineering Materials. 2013 ; 548 267-274.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.548.267
Artigo de periodico
Design issues of a Kolsky tension bar (2013)
Neves, Renato Ramirez Viana; Alves, Marcílio
Fonte: Key Engineering Materials. Unidade: EP
Assuntos: DEFORMAÇÃO E ESTRESSES, TENSÃO DOS MATERIAIS, LIGAS METÁLICAS, RESISTÊNCIA DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NEVES, Renato Ramirez Viana e ALVES, Marcílio. Design issues of a Kolsky tension bar. Key Engineering Materials, v. 535-536, p. 477-480, 2013Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.535-536.477. Acesso em: 08 out. 2025.
APA
Neves, R. R. V., & Alves, M. (2013). Design issues of a Kolsky tension bar. Key Engineering Materials, 535-536, 477-480. doi:10.4028/www.scientific.net/KEM.535-536.477
NLM
Neves RRV, Alves M. Design issues of a Kolsky tension bar [Internet]. Key Engineering Materials. 2013 ; 535-536 477-480.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.535-536.477
Vancouver
Neves RRV, Alves M. Design issues of a Kolsky tension bar [Internet]. Key Engineering Materials. 2013 ; 535-536 477-480.[citado 2025 out. 08 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.535-536.477

Unidades USP

ReP

Filtros

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Indexado em

Afiliação dos autores externos normalizada

Afiliação dos autores externos não normalizada