ReP USP - Resultado da busca

Artigo de periodico
Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V (2016)
Simoni, Helio Rubens; Abdalla, Antonio Jorge; Baptista, Carlos Antonio Reis Pereira; Lima, Milton Sergio Fernandes de
Source: Advanced Materials Research. Unidade: EEL
Assunto: TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SIMONI, Helio Rubens et al. Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V. Advanced Materials Research, v. 1135, p. 167-178, 2016Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/amr.1135.167. Acesso em: 03 nov. 2024.
APA
Simoni, H. R., Abdalla, A. J., Baptista, C. A. R. P., & Lima, M. S. F. de. (2016). Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V. Advanced Materials Research, 1135, 167-178. doi:10.4028/www.scientific.net/amr.1135.167
NLM
Simoni HR, Abdalla AJ, Baptista CARP, Lima MSF de. Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V [Internet]. Advanced Materials Research. 2016 ;1135 167-178.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/amr.1135.167
Vancouver
Simoni HR, Abdalla AJ, Baptista CARP, Lima MSF de. Mechanical behavior of surface nitrided and heat-treated laser welded Ti-6Al-4V [Internet]. Advanced Materials Research. 2016 ;1135 167-178.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/amr.1135.167
Artigo de periodico
Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive (2015)
Bezerra, Barbara Stolte; Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Zuim, Aline de Lima; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: CANA-DE-AÇÚCAR, BAGAÇOS, CHAPA DE PARTÍCULAS, BAMBU, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEZERRA, Barbara Stolte et al. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive. Advanced Materials Research, v. 1088, p. 652-655, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.652. Acesso em: 03 nov. 2024.
APA
Bezerra, B. S., Valarelli, I. de D., Battistelle, R. A. G., Zuim, A. de L., Branco, L. A. M. N., Chahud, E., et al. (2015). Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive. Advanced Materials Research, 1088, 652-655. doi:10.4028/www.scientific.net/AMR.1088.652
NLM
Bezerra BS, Valarelli I de D, Battistelle RAG, Zuim A de L, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive [Internet]. Advanced Materials Research. 2015 ; 1088 652-655.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.652
Vancouver
Bezerra BS, Valarelli I de D, Battistelle RAG, Zuim A de L, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Physical and mechanical characteristic of particleboards produced with residues of sugarcane and stem leaves of bamboo bonded with bastor oil adhesive [Internet]. Advanced Materials Research. 2015 ; 1088 652-655.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.652
Artigo de periodico
Poisson’s ratios for wood species for structural purposes (2015)
Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes; Battistelle, Rosane Aparecida Gomes; Valarelli, Ivaldo de Domenico
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA (PROPRIEDADES FÍSICAS), MADEIRA (PROPRIEDADES MECÂNICAS), ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Francisco Antonio Rocco et al. Poisson’s ratios for wood species for structural purposes. Advanced Materials Research, v. 1088, p. 690-693, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.690. Acesso em: 03 nov. 2024.
APA
Lahr, F. A. R., Christoforo, A. L., Chahud, E., Branco, L. A. M. N., Battistelle, R. A. G., & Valarelli, I. de D. (2015). Poisson’s ratios for wood species for structural purposes. Advanced Materials Research, 1088, 690-693. doi:10.4028/www.scientific.net/AMR.1088.690
NLM
Lahr FAR, Christoforo AL, Chahud E, Branco LAMN, Battistelle RAG, Valarelli I de D. Poisson’s ratios for wood species for structural purposes [Internet]. Advanced Materials Research. 2015 ; 1088 690-693.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.690
Vancouver
Lahr FAR, Christoforo AL, Chahud E, Branco LAMN, Battistelle RAG, Valarelli I de D. Poisson’s ratios for wood species for structural purposes [Internet]. Advanced Materials Research. 2015 ; 1088 690-693.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.690
Artigo de periodico
Evaluation of the moisture content in stiffness properties of structural glulam beams (2015)
Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Campos, Cristiane Inácio de; Morales, Elen Aparecida Martines; Barbosa, Juliana Cortez; Panzera, Túlio Hallak
Source: Advanced Materials Research. Unidade: EESC
Subjects: VIGAS, VIBRAÇÕES, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LAHR, Francisco Antonio Rocco et al. Evaluation of the moisture content in stiffness properties of structural glulam beams. Advanced Materials Research, v. 1088, p. 676-679, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.676. Acesso em: 03 nov. 2024.
APA
Lahr, F. A. R., Christoforo, A. L., Campos, C. I. de, Morales, E. A. M., Barbosa, J. C., & Panzera, T. H. (2015). Evaluation of the moisture content in stiffness properties of structural glulam beams. Advanced Materials Research, 1088, 676-679. doi:10.4028/www.scientific.net/AMR.1088.676
NLM
Lahr FAR, Christoforo AL, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Evaluation of the moisture content in stiffness properties of structural glulam beams [Internet]. Advanced Materials Research. 2015 ; 1088 676-679.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.676
Vancouver
Lahr FAR, Christoforo AL, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Evaluation of the moisture content in stiffness properties of structural glulam beams [Internet]. Advanced Materials Research. 2015 ; 1088 676-679.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.676
Artigo de periodico
Characterization of medium density particleborads using agricultural residues (2015)
Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Bezerra, Barbara Stolte; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: CHAPA DE PARTÍCULAS, BAMBU, RESÍDUOS AGRÍCOLAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALARELLI, Ivaldo de Domenico et al. Characterization of medium density particleborads using agricultural residues. Advanced Materials Research, v. 1088, p. 656-659, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.656. Acesso em: 03 nov. 2024.
APA
Valarelli, I. de D., Battistelle, R. A. G., Bezerra, B. S., Branco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2015). Characterization of medium density particleborads using agricultural residues. Advanced Materials Research, 1088, 656-659. doi:10.4028/www.scientific.net/AMR.1088.656
NLM
Valarelli I de D, Battistelle RAG, Bezerra BS, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Characterization of medium density particleborads using agricultural residues [Internet]. Advanced Materials Research. 2015 ; 1088 656-659.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.656
Vancouver
Valarelli I de D, Battistelle RAG, Bezerra BS, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Characterization of medium density particleborads using agricultural residues [Internet]. Advanced Materials Research. 2015 ; 1088 656-659.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.656
Artigo de periodico
Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie (2015)
Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Valarelli, Ivaldo de Domenico; Battistelle, Rosane Aparecida Gomes; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Panzera, Túlio Hallak
Source: Advanced Materials Research. Unidade: EESC
Subjects: ELASTICIDADE, MADEIRA, MÍNIMOS QUADRADOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie. Advanced Materials Research, v. 1088, p. 599-602, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.599. Acesso em: 03 nov. 2024.
APA
Christoforo, A. L., Lahr, F. A. R., Valarelli, I. de D., Battistelle, R. A. G., Branco, L. A. M. N., Chahud, E., & Panzera, T. H. (2015). Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie. Advanced Materials Research, 1088, 599-602. doi:10.4028/www.scientific.net/AMR.1088.599
NLM
Christoforo AL, Lahr FAR, Valarelli I de D, Battistelle RAG, Branco LAMN, Chahud E, Panzera TH. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 599-602.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.599
Vancouver
Christoforo AL, Lahr FAR, Valarelli I de D, Battistelle RAG, Branco LAMN, Chahud E, Panzera TH. Evaluation of the tensile modulus of elasticity in parallel direction to the grain for eucalyptus grandis wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 599-602.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.599
Artigo de periodico
Diagnosis of Wood Waste Generated by Wooden-Houses Manufacturers in the Brazilian State of Paraná (2015)
Araujo, Victor Almeida de ; Garcia, José Nivaldo ; Gava, Maristela; Morales, Elen Aparecida Martines; Cortez-Barbosa, Juliana; Savi, Antonio Francisco; Vasconcelos, Juliano Souza
Source: Advanced Materials Research. Unidade: ESALQ
Subjects: CASAS DE MADEIRA, INDÚSTRIA MADEIREIRA, MADEIRA, RESÍDUOS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Victor Almeida de et al. Diagnosis of Wood Waste Generated by Wooden-Houses Manufacturers in the Brazilian State of Paraná. Advanced Materials Research, v. 1077, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1077.265. Acesso em: 03 nov. 2024.
APA
Araujo, V. A. de, Garcia, J. N., Gava, M., Morales, E. A. M., Cortez-Barbosa, J., Savi, A. F., & Vasconcelos, J. S. (2015). Diagnosis of Wood Waste Generated by Wooden-Houses Manufacturers in the Brazilian State of Paraná. Advanced Materials Research, 1077. doi:10.4028/www.scientific.net/AMR.1077.265
NLM
Araujo VA de, Garcia JN, Gava M, Morales EAM, Cortez-Barbosa J, Savi AF, Vasconcelos JS. Diagnosis of Wood Waste Generated by Wooden-Houses Manufacturers in the Brazilian State of Paraná [Internet]. Advanced Materials Research. 2015 ; 1077[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1077.265
Vancouver
Araujo VA de, Garcia JN, Gava M, Morales EAM, Cortez-Barbosa J, Savi AF, Vasconcelos JS. Diagnosis of Wood Waste Generated by Wooden-Houses Manufacturers in the Brazilian State of Paraná [Internet]. Advanced Materials Research. 2015 ; 1077[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1077.265
Artigo de periodico
Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie (2015)
Chahud, Eduardo; Branco, Luiz Antônio Melgaço Nunes; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis ; Battistelle, Rosane Aparecida Gomes; Valarelli, Ivaldo De Domenico
Source: Advanced Materials Research. Unidade: EESC
Assunto: ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHAHUD, Eduardo et al. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie. Advanced Materials Research, v. 1088, p. 669-671, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.669. Acesso em: 03 nov. 2024.
APA
Chahud, E., Branco, L. A. M. N., Lahr, F. A. R., Christoforo, A. L., Battistelle, R. A. G., & Valarelli, I. D. D. (2015). Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie. Advanced Materials Research, 1088, 669-671. doi:10.4028/www.scientific.net/AMR.1088.669
NLM
Chahud E, Branco LAMN, Lahr FAR, Christoforo AL, Battistelle RAG, Valarelli IDD. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 669-671.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.669
Vancouver
Chahud E, Branco LAMN, Lahr FAR, Christoforo AL, Battistelle RAG, Valarelli IDD. Influence of the number of load cycles to obtain the stiffness properties of Angico Preto (Anadenanthera Macrocarpa) wood specie [Internet]. Advanced Materials Research. 2015 ; 1088 669-671.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.669
Artigo de periodico
Post-fire study of strength and stiffness of a wooden roof structure (2015)
Morales, Elen Aparecida Martines; Galdino, Danilo Soares; Barbosa, Juliana Cortez; Campos, Cristiane Inácio de; Araujo, Victor Almeida de; Lahr, Francisco Antonio Rocco ; Christoforo, André Luis ; Silva, Sérgio Augusto Mello da
Source: Advanced Materials Research. Unidades: EESC, ESALQ
Subjects: INCÊNDIO, MATERIAIS DE CONSTRUÇÃO, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORALES, Elen Aparecida Martines et al. Post-fire study of strength and stiffness of a wooden roof structure. Advanced Materials Research, v. 1088, p. 660-663, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.660. Acesso em: 03 nov. 2024.
APA
Morales, E. A. M., Galdino, D. S., Barbosa, J. C., Campos, C. I. de, Araujo, V. A. de, Lahr, F. A. R., et al. (2015). Post-fire study of strength and stiffness of a wooden roof structure. Advanced Materials Research, 1088, 660-663. doi:10.4028/www.scientific.net/AMR.1088.660
NLM
Morales EAM, Galdino DS, Barbosa JC, Campos CI de, Araujo VA de, Lahr FAR, Christoforo AL, Silva SAM da. Post-fire study of strength and stiffness of a wooden roof structure [Internet]. Advanced Materials Research. 2015 ; 1088 660-663.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.660
Vancouver
Morales EAM, Galdino DS, Barbosa JC, Campos CI de, Araujo VA de, Lahr FAR, Christoforo AL, Silva SAM da. Post-fire study of strength and stiffness of a wooden roof structure [Internet]. Advanced Materials Research. 2015 ; 1088 660-663.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.660
Artigo de periodico
Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers (2015)
Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Battistelle, Rosane Aparecida Gomes; Panzera, Túlio Hallak
Source: Advanced Materials Research. Unidade: EESC
Subjects: CONCRETO REFORÇADO COM FIBRAS, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRANCO, Luiz Antônio Melgaço Nunes et al. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers. Advanced Materials Research, v. 1088, p. 640-643, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.640. Acesso em: 03 nov. 2024.
APA
Branco, L. A. M. N., Chahud, E., Lahr, F. A. R., Christoforo, A. L., Battistelle, R. A. G., & Panzera, T. H. (2015). Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers. Advanced Materials Research, 1088, 640-643. doi:10.4028/www.scientific.net/AMR.1088.640
NLM
Branco LAMN, Chahud E, Lahr FAR, Christoforo AL, Battistelle RAG, Panzera TH. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers [Internet]. Advanced Materials Research. 2015 ; 1088 640-643.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.640
Vancouver
Branco LAMN, Chahud E, Lahr FAR, Christoforo AL, Battistelle RAG, Panzera TH. Influence of time evolution in the modulus of elasticity of concrete reinforced by carbon fibers [Internet]. Advanced Materials Research. 2015 ; 1088 640-643.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.640
Artigo de periodico
Proposed method for sustainability development of consumable goods (2015)
Fernandes, Pâmela Teixeira; Canciglieri Junior, Osíris; Sant’Anna, Ângelo Márcio Oliveira
Source: Advanced Materials Research. Unidade: EP
Subjects: DESENVOLVIMENTO SUSTENTÁVEL, SUSTENTABILIDADE, DESENVOLVIMENTO DE PRODUTOS, BENS DE CONSUMO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Pâmela Teixeira e CANCIGLIERI JUNIOR, Osíris e SANT’ANNA, Ângelo Márcio Oliveira. Proposed method for sustainability development of consumable goods. Advanced Materials Research, v. 1061 - 1062, n. Ja 2015, p. 1233-1237, 2015Tradução . . Disponível em: http://www.researchgate.net/publication/269993708_Proposed_Method_for_Sustainability_Development_of_Consumable_Goods. Acesso em: 03 nov. 2024.
APA
Fernandes, P. T., Canciglieri Junior, O., & Sant’Anna, Â. M. O. (2015). Proposed method for sustainability development of consumable goods. Advanced Materials Research, 1061 - 1062( Ja 2015), 1233-1237. Recuperado de http://www.researchgate.net/publication/269993708_Proposed_Method_for_Sustainability_Development_of_Consumable_Goods
NLM
Fernandes PT, Canciglieri Junior O, Sant’Anna ÂMO. Proposed method for sustainability development of consumable goods [Internet]. Advanced Materials Research. 2015 ; 1061 - 1062( Ja 2015): 1233-1237.[citado 2024 nov. 03 ] Available from: http://www.researchgate.net/publication/269993708_Proposed_Method_for_Sustainability_Development_of_Consumable_Goods
Vancouver
Fernandes PT, Canciglieri Junior O, Sant’Anna ÂMO. Proposed method for sustainability development of consumable goods [Internet]. Advanced Materials Research. 2015 ; 1061 - 1062( Ja 2015): 1233-1237.[citado 2024 nov. 03 ] Available from: http://www.researchgate.net/publication/269993708_Proposed_Method_for_Sustainability_Development_of_Consumable_Goods
Artigo de periodico
Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives (2015)
Battistelle, Rosane Aparecida Gomes; Bezerra, Barbara Stolte; Valarelli, Ivaldo de Domenico; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: PLÁSTICOS, MATERIAIS COMPÓSITOS, CANA-DE-AÇÚCAR, BAGAÇOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATTISTELLE, Rosane Aparecida Gomes et al. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, v. 1088, p. 407-410, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.407. Acesso em: 03 nov. 2024.
APA
Battistelle, R. A. G., Bezerra, B. S., Valarelli, I. de D., Branco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2015). Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, 1088, 407-410. doi:10.4028/www.scientific.net/AMR.1088.407
NLM
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Vancouver
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Artigo de periodico
Particleboard manufactured with variation of press time (2015)
Campos, Cristiane Inácio de; Ferreira, Bruno Santos; Lahr, Francisco Antonio Rocco; Christoforo, André Luis; Barbosa, Juliana Cortez; Morales, Elen Aparecida Martines; Lima, Felipe Oliveira
Source: Advanced Materials Research. Unidade: EESC
Subjects: PAINÉIS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS, Cristiane Inácio de et al. Particleboard manufactured with variation of press time. Advanced Materials Research, v. 1088, p. 644-647, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.644. Acesso em: 03 nov. 2024.
APA
Campos, C. I. de, Ferreira, B. S., Lahr, F. A. R., Christoforo, A. L., Barbosa, J. C., Morales, E. A. M., & Lima, F. O. (2015). Particleboard manufactured with variation of press time. Advanced Materials Research, 1088, 644-647. doi:10.4028/www.scientific.net/AMR.1088.644
NLM
Campos CI de, Ferreira BS, Lahr FAR, Christoforo AL, Barbosa JC, Morales EAM, Lima FO. Particleboard manufactured with variation of press time [Internet]. Advanced Materials Research. 2015 ; 1088 644-647.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.644
Vancouver
Campos CI de, Ferreira BS, Lahr FAR, Christoforo AL, Barbosa JC, Morales EAM, Lima FO. Particleboard manufactured with variation of press time [Internet]. Advanced Materials Research. 2015 ; 1088 644-647.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.644
Artigo de periodico
Resin-wood particulate composite reinforced with piassava fibre (2015)
Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Campos, Cristiane Inácio de; Morales, Elen Aparecida Martines; Barbosa, Juliana Cortez; Panzera, Túlio Hallak
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA (PROPRIEDADES), ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Resin-wood particulate composite reinforced with piassava fibre. Advanced Materials Research, v. 1088, p. 415-418, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.415. Acesso em: 03 nov. 2024.
APA
Christoforo, A. L., Lahr, F. A. R., Campos, C. I. de, Morales, E. A. M., Barbosa, J. C., & Panzera, T. H. (2015). Resin-wood particulate composite reinforced with piassava fibre. Advanced Materials Research, 1088, 415-418. doi:10.4028/www.scientific.net/AMR.1088.415
NLM
Christoforo AL, Lahr FAR, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Resin-wood particulate composite reinforced with piassava fibre [Internet]. Advanced Materials Research. 2015 ; 1088 415-418.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.415
Vancouver
Christoforo AL, Lahr FAR, Campos CI de, Morales EAM, Barbosa JC, Panzera TH. Resin-wood particulate composite reinforced with piassava fibre [Internet]. Advanced Materials Research. 2015 ; 1088 415-418.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.415
Artigo de periodico
Influence of portland cement addition in the physical and mechanical properties of epoxy resin (2015)
Marques, Francisco Augusto Zago; Silva, Carlos Eduardo G. da; Christoforo, André Luis; Lahr, Francisco Antonio Rocco; Panzera, Túlio Hallak; Canto, Rodrigo Bresciani
Source: Advanced Materials Research. Unidade: EESC
Subjects: CIMENTO PORTLAND, RESINAS EPOXI (PROPRIEDADES FÍSICAS), RESINAS EPOXI (PROPRIEDADES MECÂNICAS), ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Francisco Augusto Zago et al. Influence of portland cement addition in the physical and mechanical properties of epoxy resin. Advanced Materials Research, v. 1088, p. 411-414, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.411. Acesso em: 03 nov. 2024.
APA
Marques, F. A. Z., Silva, C. E. G. da, Christoforo, A. L., Lahr, F. A. R., Panzera, T. H., & Canto, R. B. (2015). Influence of portland cement addition in the physical and mechanical properties of epoxy resin. Advanced Materials Research, 1088, 411-414. doi:10.4028/www.scientific.net/AMR.1088.411
NLM
Marques FAZ, Silva CEG da, Christoforo AL, Lahr FAR, Panzera TH, Canto RB. Influence of portland cement addition in the physical and mechanical properties of epoxy resin [Internet]. Advanced Materials Research. 2015 ; 1088 411-414.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.411
Vancouver
Marques FAZ, Silva CEG da, Christoforo AL, Lahr FAR, Panzera TH, Canto RB. Influence of portland cement addition in the physical and mechanical properties of epoxy resin [Internet]. Advanced Materials Research. 2015 ; 1088 411-414.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.411
Artigo de periodico
Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics (2015)
Ribeiro, D. V.; Figueiredo, S. C.; Machado, Alexandre T.; Valenzuela Díaz, Francisco Rolando ; Souza, C. A. C.
Source: Advanced Materials Research. Unidade: EP
Subjects: CERÂMICA VERMELHA, TITÂNIO, RECICLAGEM DE RESÍDUOS URBANOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, D. V. et al. Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics. Advanced Materials Research, v. 1120-1121, p. 8-42, 2015Tradução . . Disponível em: 10.4028/www.scientific.net/AMR.1120-1121.38. Acesso em: 03 nov. 2024.
APA
Ribeiro, D. V., Figueiredo, S. C., Machado, A. T., Valenzuela Díaz, F. R., & Souza, C. A. C. (2015). Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics. Advanced Materials Research, 1120-1121, 8-42. doi:10.4028/www.scientific.net/AMR.1120-1121.38
NLM
Ribeiro DV, Figueiredo SC, Machado AT, Valenzuela Díaz FR, Souza CAC. Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics [Internet]. Advanced Materials Research. 2015 ; 1120-1121 8-42.[citado 2024 nov. 03 ] Available from: 10.4028/www.scientific.net/AMR.1120-1121.38
Vancouver
Ribeiro DV, Figueiredo SC, Machado AT, Valenzuela Díaz FR, Souza CAC. Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics [Internet]. Advanced Materials Research. 2015 ; 1120-1121 8-42.[citado 2024 nov. 03 ] Available from: 10.4028/www.scientific.net/AMR.1120-1121.38
Artigo de periodico
Embedment strength of Pinus sp. wood to metal pins (2014)
Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Molina, Julio Cesar; Ferro, Fabiane Salles; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA (PROPRIEDADES FÍSICAS;PROPRIEDADES MECÂNICAS), ESTRUTURAS DE MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Diego Henrique de et al. Embedment strength of Pinus sp. wood to metal pins. Advanced Materials Research, v. 884-885, p. 653-656, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.884-885.653. Acesso em: 03 nov. 2024.
APA
Almeida, D. H. de, Almeida, T. H. de, Molina, J. C., Ferro, F. S., Christoforo, A. L., & Lahr, F. A. R. (2014). Embedment strength of Pinus sp. wood to metal pins. Advanced Materials Research, 884-885, 653-656. doi:10.4028/www.scientific.net/AMR.884-885.653
NLM
Almeida DH de, Almeida TH de, Molina JC, Ferro FS, Christoforo AL, Lahr FAR. Embedment strength of Pinus sp. wood to metal pins [Internet]. Advanced Materials Research. 2014 ; 884-885 653-656.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.884-885.653
Vancouver
Almeida DH de, Almeida TH de, Molina JC, Ferro FS, Christoforo AL, Lahr FAR. Embedment strength of Pinus sp. wood to metal pins [Internet]. Advanced Materials Research. 2014 ; 884-885 653-656.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.884-885.653
Artigo de periodico
Influence of proportion polyol/pre-polymer castor-oil resin components in static bending properties of particleboards produced with Pinus sp. (2014)
Ferro, Fabiane Salles; Almeida, Diego Henrique de; Souza, Amós Magalhães de; Icimoto, Felipe Hideyoshi; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA, PAINÉIS, CHAPA DE PARTÍCULAS, RESINAS COMPOSTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERRO, Fabiane Salles et al. Influence of proportion polyol/pre-polymer castor-oil resin components in static bending properties of particleboards produced with Pinus sp. Advanced Materials Research, v. 884-885, p. 667-670, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.884-885.667. Acesso em: 03 nov. 2024.
APA
Ferro, F. S., Almeida, D. H. de, Souza, A. M. de, Icimoto, F. H., Christoforo, A. L., & Lahr, F. A. R. (2014). Influence of proportion polyol/pre-polymer castor-oil resin components in static bending properties of particleboards produced with Pinus sp. Advanced Materials Research, 884-885, 667-670. doi:10.4028/www.scientific.net/AMR.884-885.667
NLM
Ferro FS, Almeida DH de, Souza AM de, Icimoto FH, Christoforo AL, Lahr FAR. Influence of proportion polyol/pre-polymer castor-oil resin components in static bending properties of particleboards produced with Pinus sp. [Internet]. Advanced Materials Research. 2014 ; 884-885 667-670.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.884-885.667
Vancouver
Ferro FS, Almeida DH de, Souza AM de, Icimoto FH, Christoforo AL, Lahr FAR. Influence of proportion polyol/pre-polymer castor-oil resin components in static bending properties of particleboards produced with Pinus sp. [Internet]. Advanced Materials Research. 2014 ; 884-885 667-670.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.884-885.667
Artigo de periodico
Evaluating a test parameter in static bending for Pinus sp. wood (2014)
Morales, Elen Aparecida Martines; Kondo, Helder Kenzo; Barbosa, Juliana Cortez; Campos, Cristiane Inácio de; Lahr, Francisco Antonio Rocco; Christoforo, André Luis
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA (PROTEÇÃO), CONÍFERAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORALES, Elen Aparecida Martines et al. Evaluating a test parameter in static bending for Pinus sp. wood. Advanced Materials Research, v. 1025-1026, p. 196-199, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.196. Acesso em: 03 nov. 2024.
APA
Morales, E. A. M., Kondo, H. K., Barbosa, J. C., Campos, C. I. de, Lahr, F. A. R., & Christoforo, A. L. (2014). Evaluating a test parameter in static bending for Pinus sp. wood. Advanced Materials Research, 1025-1026, 196-199. doi:10.4028/www.scientific.net/AMR.1025-1026.196
NLM
Morales EAM, Kondo HK, Barbosa JC, Campos CI de, Lahr FAR, Christoforo AL. Evaluating a test parameter in static bending for Pinus sp. wood [Internet]. Advanced Materials Research. 2014 ; 1025-1026 196-199.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.196
Vancouver
Morales EAM, Kondo HK, Barbosa JC, Campos CI de, Lahr FAR, Christoforo AL. Evaluating a test parameter in static bending for Pinus sp. wood [Internet]. Advanced Materials Research. 2014 ; 1025-1026 196-199.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.196
Artigo de periodico
Physical and mechanical properties of Dipteryx odorata (Aublet) willd (2014)
Almeida, Diego Henrique de; Chahud, Eduardo; Ferro, Fabiane Salles; Poleto, Sabrina Fernanda Sartório; Almeida, Tiago Hendrigo de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: MADEIRA (PROPRIEDADES MECÂNICAS;PROPRIEDADES FÍSICAS), ESTRUTURAS DE MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Diego Henrique de et al. Physical and mechanical properties of Dipteryx odorata (Aublet) willd. Advanced Materials Research, v. 1025-1026, p. 46-49, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.46. Acesso em: 03 nov. 2024.
APA
Almeida, D. H. de, Chahud, E., Ferro, F. S., Poleto, S. F. S., Almeida, T. H. de, Christoforo, A. L., & Lahr, F. A. R. (2014). Physical and mechanical properties of Dipteryx odorata (Aublet) willd. Advanced Materials Research, 1025-1026, 46-49. doi:10.4028/www.scientific.net/AMR.1025-1026.46
NLM
Almeida DH de, Chahud E, Ferro FS, Poleto SFS, Almeida TH de, Christoforo AL, Lahr FAR. Physical and mechanical properties of Dipteryx odorata (Aublet) willd [Internet]. Advanced Materials Research. 2014 ; 1025-1026 46-49.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.46
Vancouver
Almeida DH de, Chahud E, Ferro FS, Poleto SFS, Almeida TH de, Christoforo AL, Lahr FAR. Physical and mechanical properties of Dipteryx odorata (Aublet) willd [Internet]. Advanced Materials Research. 2014 ; 1025-1026 46-49.[citado 2024 nov. 03 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.46

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Indexado em

Non normalized affiliation

Countries of institutions of collaboration