ReP USP - Resultado da busca

Trabalho de evento
Physical modelling of single-helix piles in sand using calibration chamber tests (2020)
Silva, Diego Moreira da; Tsuha, Cristina de Hollanda Cavalcanti
Fonte: Proceedings. Nome do evento: European Conference on Physical Modelling in Geotechnics - ECPMG. Unidade: EESC
Assuntos: ESTACAS HÉLICE CONTÍNUA E ÔMEGA, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Diego Moreira da e TSUHA, Cristina de Hollanda Cavalcanti. Physical modelling of single-helix piles in sand using calibration chamber tests. 2020, Anais.. Lulea, Sweden: Lulea University of Technology, 2020. Disponível em: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf. Acesso em: 03 out. 2024.
APA
Silva, D. M. da, & Tsuha, C. de H. C. (2020). Physical modelling of single-helix piles in sand using calibration chamber tests. In Proceedings. Lulea, Sweden: Lulea University of Technology. Recuperado de https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
NLM
Silva DM da, Tsuha C de HC. Physical modelling of single-helix piles in sand using calibration chamber tests [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Vancouver
Silva DM da, Tsuha C de HC. Physical modelling of single-helix piles in sand using calibration chamber tests [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/063568c8-a45d-4c6d-b751-62d141fa2c16/trabalho%2001%20-%20Physical%20modelling%20of%20single-helix%20piles%20in%20sand%20using%20calibration%20chamber%20tests%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Trabalho de evento
Study on the installation effect of helical piles in very dense sand (2020)
Schiavon, José Antonio; Tsuha, Cristina de Hollanda Cavalcanti ; Thorel, Luc
Fonte: Proceedings. Nome do evento: European Conference on Physical Modelling in Geotechnics - ECPMG. Unidade: EESC
Assuntos: ESTACAS, AREIA, PERFURAÇÃO, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIAVON, José Antonio e TSUHA, Cristina de Hollanda Cavalcanti e THOREL, Luc. Study on the installation effect of helical piles in very dense sand. 2020, Anais.. Lulea, Sweden: Lulea University of Technology, 2020. Disponível em: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf. Acesso em: 03 out. 2024.
APA
Schiavon, J. A., Tsuha, C. de H. C., & Thorel, L. (2020). Study on the installation effect of helical piles in very dense sand. In Proceedings. Lulea, Sweden: Lulea University of Technology. Recuperado de https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
NLM
Schiavon JA, Tsuha C de HC, Thorel L. Study on the installation effect of helical piles in very dense sand [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Vancouver
Schiavon JA, Tsuha C de HC, Thorel L. Study on the installation effect of helical piles in very dense sand [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/bf891d02-8e0b-4c59-ad41-c4a6bec66104/trabalho%2002%20-%20Study%20on%20the%20installation%20effect%20of%20helical%20piles%20in%20very%20dense%20sand%20%284th%20European%20Conference%20on%20Physical%20Modelling%20in%20Geotechnics%20-%20ECPMG%202020%29.pdf
Artigo de periodico
On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS (2018)
Guimaraes, Mônica Costa Rodrigues; Castilho, Bruno César Noronha Marques de; Nossa, Tamires de Souza; Avila, Pedro Renato Tavares; Cucatti, Silvia; Alvarez, Fernando; Garcia, Jose Luis; Pinto, Haroldo Cavalcanti
Fonte: Surface & Coating Technology. Unidade: EESC
Assuntos: TENSÃO RESIDUAL, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUIMARAES, Mônica Costa Rodrigues et al. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, v. 340, p. 112-120, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2018.02.028. Acesso em: 03 out. 2024.
APA
Guimaraes, M. C. R., Castilho, B. C. N. M. de, Nossa, T. de S., Avila, P. R. T., Cucatti, S., Alvarez, F., et al. (2018). On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS. Surface & Coating Technology, 340, 112-120. doi:10.1016/j.surfcoat.2018.02.028
NLM
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Vancouver
Guimaraes MCR, Castilho BCNM de, Nossa T de S, Avila PRT, Cucatti S, Alvarez F, Garcia JL, Pinto HC. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS [Internet]. Surface & Coating Technology. 2018 ; 340 112-120.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2018.02.028
Trabalho de evento
Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design (2016)
Bravo Mosquera, Pedro David; Abdalla, Alvaro Martins ; Cerón Muñoz, Hernán Darío ; Catalano, Fernando Martini
Nome do evento: Aerospace Technology Congress. Unidade: EESC
Assuntos: PROJETO DE AERONAVES, AERODINÂMICA DE AERONAVES, AERONAVES MILITARES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRAVO MOSQUERA, Pedro David et al. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 03 out. 2024.
APA
Bravo Mosquera, P. D., Abdalla, A. M., Cerón Muñoz, H. D., & Catalano, F. M. (2016). Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016 ;[citado 2024 out. 03 ]
Vancouver
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Aerodynamic analysis of the influence of canopy shape in the supersonic dorsal intake design. 2016 ;[citado 2024 out. 03 ]
Trabalho de evento
Road safety performance in Brazil: towards a composite indicator (2016)
Bastos, Jorge Tiago; Shen, Yongjun; Hermans, Elke; Brijs, Tom; Wets, Geert; Ferraz, Antônio Clóvis Pinto
Fonte: Proceedings. Nome do evento: International Conference Road Safety On Five Continents -RS5C 2016. Unidade: EESC
Assuntos: SEGURANÇA RODOVIÁRIA, SEGURANÇA DE TRÁFEGO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BASTOS, Jorge Tiago et al. Road safety performance in Brazil: towards a composite indicator. 2016, Anais.. Linköping: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2016. Disponível em: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf. Acesso em: 03 out. 2024.
APA
Bastos, J. T., Shen, Y., Hermans, E., Brijs, T., Wets, G., & Ferraz, A. C. P. (2016). Road safety performance in Brazil: towards a composite indicator. In Proceedings. Linköping: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
NLM
Bastos JT, Shen Y, Hermans E, Brijs T, Wets G, Ferraz ACP. Road safety performance in Brazil: towards a composite indicator [Internet]. Proceedings. 2016 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
Vancouver
Bastos JT, Shen Y, Hermans E, Brijs T, Wets G, Ferraz ACP. Road safety performance in Brazil: towards a composite indicator [Internet]. Proceedings. 2016 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/cb1ef6fa-1e5c-4f46-acaf-82bf18cbfb4e/sysno3155233%5BTrab%20ev%5D%20Bastos_Road%20safety%20performance%20in%20Brazil%20%281%29.pdf
Trabalho de evento
Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences (2016)
Catalano, Fernando Martini ; Abdalla, Alvaro Martins ; Cerón Muñoz, Hernán Darío ; Munjulury, Raghu Chaitanya
Nome do evento: Aerospace Technology Congress. Unidade: EESC
Assuntos: TÚNEIS DE VENTO, AERODINÂMICA DE AERONAVES, ASAS DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CATALANO, Fernando Martini et al. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 03 out. 2024.
APA
Catalano, F. M., Abdalla, A. M., Cerón Muñoz, H. D., & Munjulury, R. C. (2016). Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Catalano FM, Abdalla AM, Cerón Muñoz HD, Munjulury RC. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016 ;[citado 2024 out. 03 ]
Vancouver
Catalano FM, Abdalla AM, Cerón Muñoz HD, Munjulury RC. Experimental aerodynamic analysis of a fighter aircraft with a canard, forward swept wing and dorsal intake operating at high incidences. 2016 ;[citado 2024 out. 03 ]
Trabalho de evento
Analysis of radar cross section and wave drag reduction of fighter aircraft (2016)
Barbosa, Uandha Fernandes; Costa, João Paulo Monteiro Cruvinel da; Munjulury, Raghu Chaitanya; Abdalla, Alvaro Martins
Nome do evento: Aerospace Technology Congress. Unidade: EESC
Assuntos: AERONAVES MILITARES, AERODINÂMICA DE AERONAVES, AERONAVES SUPERSÔNICAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Uandha Fernandes et al. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016, Anais.. Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics, 2016. . Acesso em: 03 out. 2024.
APA
Barbosa, U. F., Costa, J. P. M. C. da, Munjulury, R. C., & Abdalla, A. M. (2016). Analysis of radar cross section and wave drag reduction of fighter aircraft. In . Stockholm, Sweden: Swedish Society of Aeronautics and Astronautics.
NLM
Barbosa UF, Costa JPMC da, Munjulury RC, Abdalla AM. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016 ;[citado 2024 out. 03 ]
Vancouver
Barbosa UF, Costa JPMC da, Munjulury RC, Abdalla AM. Analysis of radar cross section and wave drag reduction of fighter aircraft. 2016 ;[citado 2024 out. 03 ]
Artigo de periodico
Wear and corrosion of niobium carbide coated AISI 52100 bearing steel (2015)
Fernandes, F. A. P; Gallego, J; Picon, Carlos Alberto; Tremiliosi Filho, Germano ; Casteletti, Luíz Carlos
Fonte: Surface & Coating Technology. Unidades: IQSC, EESC
Assunto: CORROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, F. A. P et al. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel. Surface & Coating Technology, v. 279, p. 112-117, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2015.08.036. Acesso em: 03 out. 2024.
APA
Fernandes, F. A. P., Gallego, J., Picon, C. A., Tremiliosi Filho, G., & Casteletti, L. C. (2015). Wear and corrosion of niobium carbide coated AISI 52100 bearing steel. Surface & Coating Technology, 279, 112-117. doi:10.1016/j.surfcoat.2015.08.036
NLM
Fernandes FAP, Gallego J, Picon CA, Tremiliosi Filho G, Casteletti LC. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel [Internet]. Surface & Coating Technology. 2015 ; 279 112-117.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.08.036
Vancouver
Fernandes FAP, Gallego J, Picon CA, Tremiliosi Filho G, Casteletti LC. Wear and corrosion of niobium carbide coated AISI 52100 bearing steel [Internet]. Surface & Coating Technology. 2015 ; 279 112-117.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2015.08.036
Trabalho de evento
Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system (2013)
Bueno, Cristiane; Rossignolo, João Adriano; Ometto, Aldo Roberto
Fonte: Proceedings of the 6th International Conference on Life Cycle Management. Nome do evento: International Conference on Life Cycle Management. Unidades: FZEA, EESC
Assuntos: CONSTRUÇÃO CIVIL (ASPECTOS AMBIENTAIS), EDIFÍCIOS SUSTENTÁVEIS (CERTIFICAÇÃO), MATERIAIS DE CONSTRUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUENO, Cristiane e ROSSIGNOLO, João Adriano e OMETTO, Aldo Roberto. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system. 2013, Anais.. Gothenburg, Sweden: Chalmers University of Technology, 2013. Disponível em: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185. Acesso em: 03 out. 2024.
APA
Bueno, C., Rossignolo, J. A., & Ometto, A. R. (2013). Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system. In Proceedings of the 6th International Conference on Life Cycle Management. Gothenburg, Sweden: Chalmers University of Technology. Recuperado de http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
NLM
Bueno C, Rossignolo JA, Ometto AR. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 out. 03 ] Available from: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
Vancouver
Bueno C, Rossignolo JA, Ometto AR. Use of life cycle thinking for environmental impact assessment of building materials: new developments in the leed certification system [Internet]. Proceedings of the 6th International Conference on Life Cycle Management. 2013 ;[citado 2024 out. 03 ] Available from: http://conferences.chalmers.se/index.php/LCM/LCM2013/paper/view/584/185
Trabalho de evento-anais periodico
Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes (2013)
Cucatti, Silvia Azevedo dos Santos; Ochoa, E.; Garcia, J; Pinto, Haroldo Cavalcanti ; Morales, M; Droppa Jr, R; Zagonel, Luiz Fernando; Wisnivesky, D; Alvarez, F
Fonte: Proceedings. Nome do evento: International Conference on Plasma Surface Engineering - PSE 2012. Unidade: EESC
Assuntos: RADIAÇÃO SINCROTRON, TENSÃO RESIDUAL, REVESTIMENTOS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CUCATTI, Silvia Azevedo dos Santos et al. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes. Proceedings. Linköping: LiU Electronic Press. Disponível em: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf. Acesso em: 03 out. 2024. , 2013
APA
Cucatti, S. A. dos S., Ochoa, E., Garcia, J., Pinto, H. C., Morales, M., Droppa Jr, R., et al. (2013). Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes. Proceedings. Linköping: LiU Electronic Press. Recuperado de https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
NLM
Cucatti SA dos S, Ochoa E, Garcia J, Pinto HC, Morales M, Droppa Jr R, Zagonel LF, Wisnivesky D, Alvarez F. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes [Internet]. Proceedings. 2013 ;( 2): 92-95.[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
Vancouver
Cucatti SA dos S, Ochoa E, Garcia J, Pinto HC, Morales M, Droppa Jr R, Zagonel LF, Wisnivesky D, Alvarez F. Effect of Xe+ ion bombardment induced patterns in stainless steel on plasma nitriding processes [Internet]. Proceedings. 2013 ;( 2): 92-95.[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/38d50520-44dd-46d2-91f0-d28fc3419c6e/sysno3004920_trabalho%20em%20congresso%2010.pdf
Trabalho de evento-anais periodico
Effects of ion-beam bombardment on the physical properties of 100Cr6 steel (2013)
Droppa Jr, R.; Pinto, Haroldo Cavalcanti ; Garcia, J; Ochoa, E.; Morales, M; Cucatti, S; Alvarez, F
Fonte: Proceedings. Nome do evento: International Conference on Plasma Surface Engineering - PSE 2012. Unidade: EESC
Assuntos: TENSÃO RESIDUAL, DESGASTE DOS MATERIAIS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DROPPA JR, R. et al. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel. Proceedings. Linköping: LiU Electronic Press. Disponível em: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf. Acesso em: 03 out. 2024. , 2013
APA
Droppa Jr, R., Pinto, H. C., Garcia, J., Ochoa, E., Morales, M., Cucatti, S., & Alvarez, F. (2013). Effects of ion-beam bombardment on the physical properties of 100Cr6 steel. Proceedings. Linköping: LiU Electronic Press. Recuperado de https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
NLM
Droppa Jr R, Pinto HC, Garcia J, Ochoa E, Morales M, Cucatti S, Alvarez F. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel [Internet]. Proceedings. 2013 ;( 2): 338-341.[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
Vancouver
Droppa Jr R, Pinto HC, Garcia J, Ochoa E, Morales M, Cucatti S, Alvarez F. Effects of ion-beam bombardment on the physical properties of 100Cr6 steel [Internet]. Proceedings. 2013 ;( 2): 338-341.[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ba031f53-b93b-4858-be60-bc85ad2d7ad5/sysno3004919_trabalho%20em%20congresso%209.pdf
Trabalho de evento
Study of Influence of Barriers on Visibility of Two-Way Highways (2013)
Matos, Érica Santos; Larocca, Ana Paula Camargo ; Kabbach Júnior, Felipe Issa
Fonte: Proceedings. Nome do evento: International Conference Road Safety on Four Continents. Unidades: EESC, EP
Assuntos: SEGURANÇA RODOVIÁRIA, SEGURANÇA VEICULAR, INFRAESTRUTURA DE TRANSPORTES, RODOVIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATOS, Érica Santos e LAROCCA, Ana Paula Camargo e KABBACH JÚNIOR, Felipe Issa. Study of Influence of Barriers on Visibility of Two-Way Highways. 2013, Anais.. Linköping: Statens väg-och transportforskningsinstitut, 2013. Disponível em: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf. Acesso em: 03 out. 2024.
APA
Matos, É. S., Larocca, A. P. C., & Kabbach Júnior, F. I. (2013). Study of Influence of Barriers on Visibility of Two-Way Highways. In Proceedings. Linköping: Statens väg-och transportforskningsinstitut. Recuperado de http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
NLM
Matos ÉS, Larocca APC, Kabbach Júnior FI. Study of Influence of Barriers on Visibility of Two-Way Highways [Internet]. Proceedings. 2013 ;[citado 2024 out. 03 ] Available from: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
Vancouver
Matos ÉS, Larocca APC, Kabbach Júnior FI. Study of Influence of Barriers on Visibility of Two-Way Highways [Internet]. Proceedings. 2013 ;[citado 2024 out. 03 ] Available from: http://vti.diva-portal.org/smash/get/diva2:761308/FULLTEXT01.pdf
Trabalho de evento
Highway capacity research in Brazil (2011)
Setti, José Reynaldo Anselmo
Nome do evento: International Symposium on Highway Capacity and Quality of Service. Unidade: EESC
Assunto: RODOVIAS (CAPACIDADE)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SETTI, José Reynaldo Anselmo. Highway capacity research in Brazil. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 03 out. 2024.
APA
Setti, J. R. A. (2011). Highway capacity research in Brazil. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Setti JRA. Highway capacity research in Brazil. 2011 ;[citado 2024 out. 03 ]
Vancouver
Setti JRA. Highway capacity research in Brazil. 2011 ;[citado 2024 out. 03 ]
Trabalho de evento
Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems (2011)
Medrano Castillo, Madeleine Rocio; London Junior, Joao Bosco Augusto; Bretas, Newton Geraldo; Lefebvre, Serge; Prévost, Jacques; Lambert, Bertrand
Nome do evento: Power Systems Computation Conference - PSCC. Unidade: EESC
Assunto: SISTEMAS ELÉTRICOS DE POTÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDRANO CASTILLO, Madeleine Rocio et al. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 03 out. 2024.
APA
Medrano Castillo, M. R., London Junior, J. B. A., Bretas, N. G., Lefebvre, S., Prévost, J., & Lambert, B. (2011). Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Medrano Castillo MR, London Junior JBA, Bretas NG, Lefebvre S, Prévost J, Lambert B. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011 ;[citado 2024 out. 03 ]
Vancouver
Medrano Castillo MR, London Junior JBA, Bretas NG, Lefebvre S, Prévost J, Lambert B. Validation of an off-line approach for transmission line parameters estimation on two Hydro-Québec subsystems. 2011 ;[citado 2024 out. 03 ]
Trabalho de evento
Transmission system expansion planning with multiple generation dispatch scenarios (2011)
Sousa, Aldir Silva; Asada, Eduardo Nobuhiro
Nome do evento: Power Systems Computation Conference - PSCC. Unidade: EESC
Assunto: TRANSMISSÃO DE ENERGIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA, Aldir Silva e ASADA, Eduardo Nobuhiro. Transmission system expansion planning with multiple generation dispatch scenarios. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 03 out. 2024.
APA
Sousa, A. S., & Asada, E. N. (2011). Transmission system expansion planning with multiple generation dispatch scenarios. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Sousa AS, Asada EN. Transmission system expansion planning with multiple generation dispatch scenarios. 2011 ;[citado 2024 out. 03 ]
Vancouver
Sousa AS, Asada EN. Transmission system expansion planning with multiple generation dispatch scenarios. 2011 ;[citado 2024 out. 03 ]
Trabalho de evento
Measurement gross error composition, considering the residual vector correlation for power system state estimation (2011)
Bretas, Newton Geraldo; Martins, André Christovão Pio
Nome do evento: Power Systems Computation Conference - PSCC. Unidade: EESC
Assuntos: ANÁLISE DE ERROS, RECUPERAÇÃO DA INFORMAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRETAS, Newton Geraldo e MARTINS, André Christovão Pio. Measurement gross error composition, considering the residual vector correlation for power system state estimation. 2011, Anais.. Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2011. . Acesso em: 03 out. 2024.
APA
Bretas, N. G., & Martins, A. C. P. (2011). Measurement gross error composition, considering the residual vector correlation for power system state estimation. In . Stockholm: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Bretas NG, Martins ACP. Measurement gross error composition, considering the residual vector correlation for power system state estimation. 2011 ;[citado 2024 out. 03 ]
Vancouver
Bretas NG, Martins ACP. Measurement gross error composition, considering the residual vector correlation for power system state estimation. 2011 ;[citado 2024 out. 03 ]
Trabalho de evento
Is the industrial product-service system really sustainable (2010)
Pigosso, Daniela Cristina Antelmi; Sousa, Sabrina Rodrigues; Guelere Filho, Américo; Ometto, Aldo Roberto; Rozenfeld, Henrique
Fonte: Proceedings. Nome do evento: CIRP International Conference on Industrial Product Service Systems. Unidade: EESC
Assuntos: SISTEMA PRODUTO-SERVIÇO (PSS), DESENVOLVIMENTO SUSTENTÁVEL, DESIGN (ASPECTOS AMBIENTAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOSSO, Daniela Cristina Antelmi et al. Is the industrial product-service system really sustainable. 2010, Anais.. Linköping, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2010. Disponível em: http://legacy.unifacef.com.br/quartocbs/arquivos/30.pdf. Acesso em: 03 out. 2024.
APA
Pigosso, D. C. A., Sousa, S. R., Guelere Filho, A., Ometto, A. R., & Rozenfeld, H. (2010). Is the industrial product-service system really sustainable. In Proceedings. Linköping, Sweden: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de http://legacy.unifacef.com.br/quartocbs/arquivos/30.pdf
NLM
Pigosso DCA, Sousa SR, Guelere Filho A, Ometto AR, Rozenfeld H. Is the industrial product-service system really sustainable [Internet]. Proceedings. 2010 ;[citado 2024 out. 03 ] Available from: http://legacy.unifacef.com.br/quartocbs/arquivos/30.pdf
Vancouver
Pigosso DCA, Sousa SR, Guelere Filho A, Ometto AR, Rozenfeld H. Is the industrial product-service system really sustainable [Internet]. Proceedings. 2010 ;[citado 2024 out. 03 ] Available from: http://legacy.unifacef.com.br/quartocbs/arquivos/30.pdf
Trabalho de evento
Subsurface irrigation of arborial areas as a mechanism for carbon sequestration through treated sanitary wastewater as a radicular nutrient source (2007)
Galavoti, Ricardo Camilo; Ohnuma Júnior, Alfredo Akira; Andrade, Juliana Pontes Machado de; Mendiondo, Eduardo Mario
Nome do evento: International Conference on Technologies for Waste and Wastewater treatment, Energy from Waste, Remediation of Contaminated Sites and Emissions Related to Climate. Unidade: EESC
Assuntos: ÁGUAS RESIDUÁRIAS, REÚSO DA ÁGUA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GALAVOTI, Ricardo Camilo et al. Subsurface irrigation of arborial areas as a mechanism for carbon sequestration through treated sanitary wastewater as a radicular nutrient source. 2007, Anais.. Kalmar: University of Kalmar, 2007. . Acesso em: 03 out. 2024.
APA
Galavoti, R. C., Ohnuma Júnior, A. A., Andrade, J. P. M. de, & Mendiondo, E. M. (2007). Subsurface irrigation of arborial areas as a mechanism for carbon sequestration through treated sanitary wastewater as a radicular nutrient source. In . Kalmar: University of Kalmar.
NLM
Galavoti RC, Ohnuma Júnior AA, Andrade JPM de, Mendiondo EM. Subsurface irrigation of arborial areas as a mechanism for carbon sequestration through treated sanitary wastewater as a radicular nutrient source. 2007 ;[citado 2024 out. 03 ]
Vancouver
Galavoti RC, Ohnuma Júnior AA, Andrade JPM de, Mendiondo EM. Subsurface irrigation of arborial areas as a mechanism for carbon sequestration through treated sanitary wastewater as a radicular nutrient source. 2007 ;[citado 2024 out. 03 ]
Artigo de periodico
Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour (2004)
Freitas, Emerson Reginaldo; Ferrante, Maurízio; Silva, Valdinei Ferreira da; Bose Filho, Waldek Wladimir; Spinelli, Dirceu
Fonte: Journal of Materials Processing Technology. Unidade: EESC
Assuntos: FADIGA DOS MATERIAIS, LIGAS RESISTENTES AO CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FREITAS, Emerson Reginaldo et al. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour. Journal of Materials Processing Technology, v. No 2004, p. 1629-1633, 2004Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2004.04.314. Acesso em: 03 out. 2024.
APA
Freitas, E. R., Ferrante, M., Silva, V. F. da, Bose Filho, W. W., & Spinelli, D. (2004). Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour. Journal of Materials Processing Technology, No 2004, 1629-1633. doi:10.1016/j.jmatprotec.2004.04.314
NLM
Freitas ER, Ferrante M, Silva VF da, Bose Filho WW, Spinelli D. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour [Internet]. Journal of Materials Processing Technology. 2004 ; No 2004 1629-1633.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.04.314
Vancouver
Freitas ER, Ferrante M, Silva VF da, Bose Filho WW, Spinelli D. Thixoextrusion of an A356 alloy: microstructural studies and high temperature fatigue behaviour [Internet]. Journal of Materials Processing Technology. 2004 ; No 2004 1629-1633.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/j.jmatprotec.2004.04.314
Artigo de periodico
Protective carbon layer for chemical corrosion of stainless steel (2003)
Mansano, Ronaldo Domingues ; Massi, Marcos; Santos, Ana Paula Mousinho dos; Zambom, Luís da Silva ; Gonçalves Neto, Luíz
Fonte: Diamond and Related Materials. Unidades: EESC, EP
Assuntos: FILMES FINOS, CORROSÃO DOS MATERIAIS, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MANSANO, Ronaldo Domingues et al. Protective carbon layer for chemical corrosion of stainless steel. Diamond and Related Materials, v. 12, n. 3-7, p. 749-752, 2003Tradução . . Disponível em: https://doi.org/10.1016/s0925-9635(02)00270-4. Acesso em: 03 out. 2024.
APA
Mansano, R. D., Massi, M., Santos, A. P. M. dos, Zambom, L. da S., & Gonçalves Neto, L. (2003). Protective carbon layer for chemical corrosion of stainless steel. Diamond and Related Materials, 12( 3-7), 749-752. doi:10.1016/s0925-9635(02)00270-4
NLM
Mansano RD, Massi M, Santos APM dos, Zambom L da S, Gonçalves Neto L. Protective carbon layer for chemical corrosion of stainless steel [Internet]. Diamond and Related Materials. 2003 ; 12( 3-7): 749-752.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/s0925-9635(02)00270-4
Vancouver
Mansano RD, Massi M, Santos APM dos, Zambom L da S, Gonçalves Neto L. Protective carbon layer for chemical corrosion of stainless steel [Internet]. Diamond and Related Materials. 2003 ; 12( 3-7): 749-752.[citado 2024 out. 03 ] Available from: https://doi.org/10.1016/s0925-9635(02)00270-4

Unidades USP

ReP

Filtros

Unidades USP

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Título da fonte

Editora

Nome do evento

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada