ReP USP - Resultado da busca

Artigo de periodico
Failure analysis of an AISI 316 steel pipe elbow exposed to the weather for three years after 16 years of operating at 515 °C (2023)
Moraes, Flavio Pereira de ; Amaral, Emanuelle Machado ; Beneduce Neto, Flavio ; Padilha, Angelo Fernando
Source: Tecnologia em Metalurgia, Materiais e Mineração. Unidade: EP
Subjects: IMPERFEIÇÕES E FALHAS DOS MATERIAIS, CORROSÃO, AÇO INOXIDÁVEL AUSTENÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Flavio Pereira de et al. Failure analysis of an AISI 316 steel pipe elbow exposed to the weather for three years after 16 years of operating at 515 °C. Tecnologia em Metalurgia, Materiais e Mineração, v. 20, 2023Tradução . . Disponível em: http://dx.doi.org/10.4322/2176-1523.20232879. Acesso em: 27 jun. 2024.
APA
Moraes, F. P. de, Amaral, E. M., Beneduce Neto, F., & Padilha, A. F. (2023). Failure analysis of an AISI 316 steel pipe elbow exposed to the weather for three years after 16 years of operating at 515 °C. Tecnologia em Metalurgia, Materiais e Mineração, 20. doi:https://dx.doi.org/10.4322/2176-1523.20232879
NLM
Moraes FP de, Amaral EM, Beneduce Neto F, Padilha AF. Failure analysis of an AISI 316 steel pipe elbow exposed to the weather for three years after 16 years of operating at 515 °C [Internet]. Tecnologia em Metalurgia, Materiais e Mineração. 2023 ; 20[citado 2024 jun. 27 ] Available from: http://dx.doi.org/10.4322/2176-1523.20232879
Vancouver
Moraes FP de, Amaral EM, Beneduce Neto F, Padilha AF. Failure analysis of an AISI 316 steel pipe elbow exposed to the weather for three years after 16 years of operating at 515 °C [Internet]. Tecnologia em Metalurgia, Materiais e Mineração. 2023 ; 20[citado 2024 jun. 27 ] Available from: http://dx.doi.org/10.4322/2176-1523.20232879
Artigo de periodico
Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel (2023)
Ribamar, Giovani Gonçalves; Escobar, Julian D. ; Silva, A. Kwiatkowski da; Schell, N; Ávila, J. A ; Nishikawa, Arthur Seiji ; Oliveira, J. P; Goldenstein, Hélio
Source: Acta Materialia. Unidade: EP
Subjects: CARBONO, TÊMPERA, RADIAÇÃO (CALOR)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBAMAR, Giovani Gonçalves et al. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel. Acta Materialia, v. 247, p. 11 118742, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.actamat.2023.118742. Acesso em: 27 jun. 2024.
APA
Ribamar, G. G., Escobar, J. D., Silva, A. K. da, Schell, N., Ávila, J. A., Nishikawa, A. S., et al. (2023). Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel. Acta Materialia, 247, 11 118742. doi:10.1016/j.actamat.2023.118742
NLM
Ribamar GG, Escobar JD, Silva AK da, Schell N, Ávila JA, Nishikawa AS, Oliveira JP, Goldenstein H. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel [Internet]. Acta Materialia. 2023 ; 247 11 118742.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.actamat.2023.118742
Vancouver
Ribamar GG, Escobar JD, Silva AK da, Schell N, Ávila JA, Nishikawa AS, Oliveira JP, Goldenstein H. Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel [Internet]. Acta Materialia. 2023 ; 247 11 118742.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.actamat.2023.118742
Artigo de periodico
Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers (2023)
Galvão, Luciana dos Santos ; Ferreira, Rafaela R. ; Fernandes, Emilia Mori Sarti; Correia, Carla Almêda ; Valera, Ticiane Sanches ; Rosa, Derval dos Santos ; Wiebeck, Hélio
Source: Journal of Hazardous Materials. Unidade: EP
Subjects: CORANTES, FIBRAS ARTIFICIAIS, LUMINESCÊNCIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GALVÃO, Luciana dos Santos et al. Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers. Journal of Hazardous Materials, v. 443, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jhazmat.2022.130217. Acesso em: 27 jun. 2024.
APA
Galvão, L. dos S., Ferreira, R. R., Fernandes, E. M. S., Correia, C. A., Valera, T. S., Rosa, D. dos S., & Wiebeck, H. (2023). Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers. Journal of Hazardous Materials, 443. doi:10.1016/j.jhazmat.2022.130217
NLM
Galvão L dos S, Ferreira RR, Fernandes EMS, Correia CA, Valera TS, Rosa D dos S, Wiebeck H. Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers [Internet]. Journal of Hazardous Materials. 2023 ;443[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.jhazmat.2022.130217
Vancouver
Galvão L dos S, Ferreira RR, Fernandes EMS, Correia CA, Valera TS, Rosa D dos S, Wiebeck H. Analysis of selective fluorescence for the characterization of microplastic fibers: Use of a Nile Red-based analytical method to compare between natural and synthetic fibers [Internet]. Journal of Hazardous Materials. 2023 ;443[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.jhazmat.2022.130217
Artigo de periodico
Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3 (2023)
Prada Ramirez, Oscar Mauricio; Kremmer, Thomas M; Marin, Jayr Henrique; Silva, Brunela Pereira da; Starykevich, Maksim; Tunes, Matheus Araujo; Ferreira, Mário Guereiro Silva; Aoki, Idalina Vieira; Ando, Rômulo Augusto; Pogatscher, Stefan; Melo, Hercílio Gomes de
Source: Corrosion Science. Unidade: EP
Subjects: ANODIZAÇÃO, MICROSCOPIA ELETRÔNICA, ESPECTROSCOPIA ELETRÔNICA, ELETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PRADA RAMIREZ, Oscar Mauricio et al. Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3. Corrosion Science, v. 221, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.corsci.2023.111330. Acesso em: 27 jun. 2024.
APA
Prada Ramirez, O. M., Kremmer, T. M., Marin, J. H., Silva, B. P. da, Starykevich, M., Tunes, M. A., et al. (2023). Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3. Corrosion Science, 221. doi:0.1016/j.corsci.2023.111330
NLM
Prada Ramirez OM, Kremmer TM, Marin JH, Silva BP da, Starykevich M, Tunes MA, Ferreira MGS, Aoki IV, Ando RA, Pogatscher S, Melo HG de. Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3 [Internet]. Corrosion Science. 2023 ;221[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.corsci.2023.111330
Vancouver
Prada Ramirez OM, Kremmer TM, Marin JH, Silva BP da, Starykevich M, Tunes MA, Ferreira MGS, Aoki IV, Ando RA, Pogatscher S, Melo HG de. Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3 [Internet]. Corrosion Science. 2023 ;221[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.corsci.2023.111330
Artigo de periodico
On the feasibility of using Sm2Fe17Nx powders obtained via HDDR process for laser powder bed fusion of bonded permanent magnets (2023)
Röhrig, M.; Fim, Rafael Gitti Tortoretto; Quispe, L. T.; Landgraf, Fernando José Gomes ; Ahrens, Carlos Henrique; Pla Cid, Cristiani C; Wendhausen, P. A. P
Source: Journal of Magnetism and Magnetic Materials. Unidade: EP
Subjects: TERRAS RARAS, HIDROGENAÇÃO, MANUFATURA ADITIVA, PROPRIEDADES DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RÖHRIG, M. et al. On the feasibility of using Sm2Fe17Nx powders obtained via HDDR process for laser powder bed fusion of bonded permanent magnets. Journal of Magnetism and Magnetic Materials, v. 565, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jmmm.2022.170273. Acesso em: 27 jun. 2024.
APA
Röhrig, M., Fim, R. G. T., Quispe, L. T., Landgraf, F. J. G., Ahrens, C. H., Pla Cid, C. C., & Wendhausen, P. A. P. (2023). On the feasibility of using Sm2Fe17Nx powders obtained via HDDR process for laser powder bed fusion of bonded permanent magnets. Journal of Magnetism and Magnetic Materials, 565, 8 . doi:10.1016/j.jmmm.2022.170273
NLM
Röhrig M, Fim RGT, Quispe LT, Landgraf FJG, Ahrens CH, Pla Cid CC, Wendhausen PAP. On the feasibility of using Sm2Fe17Nx powders obtained via HDDR process for laser powder bed fusion of bonded permanent magnets [Internet]. Journal of Magnetism and Magnetic Materials. 2023 ; 565 8 .[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.jmmm.2022.170273
Vancouver
Röhrig M, Fim RGT, Quispe LT, Landgraf FJG, Ahrens CH, Pla Cid CC, Wendhausen PAP. On the feasibility of using Sm2Fe17Nx powders obtained via HDDR process for laser powder bed fusion of bonded permanent magnets [Internet]. Journal of Magnetism and Magnetic Materials. 2023 ; 565 8 .[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.jmmm.2022.170273
Artigo de periodico
ATR-FTIR Spectroscopy Combined with Chemometric Methods for the Classification of Polyethylene Residues Containing Different Contaminants (2022)
Silva, Daniel José da ; Wiebeck, Hélio
Source: Journal of Polymers and the Environment. Unidade: EP
Subjects: ESPECTROSCOPIA, PLÁSTICOS, ANÁLISE MULTIVARIADA, ESPECTROSCOPIA INFRAVERMELHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Daniel José da e WIEBECK, Hélio. ATR-FTIR Spectroscopy Combined with Chemometric Methods for the Classification of Polyethylene Residues Containing Different Contaminants. Journal of Polymers and the Environment, n. 14 p. ja , 2022Tradução . . Disponível em: https://doi.org/10.1007/s10924-022-02396-3. Acesso em: 27 jun. 2024.
APA
Silva, D. J. da, & Wiebeck, H. (2022). ATR-FTIR Spectroscopy Combined with Chemometric Methods for the Classification of Polyethylene Residues Containing Different Contaminants. Journal of Polymers and the Environment, ( 14 p. ja ). doi:10.1007/s10924-022-02396-3
NLM
Silva DJ da, Wiebeck H. ATR-FTIR Spectroscopy Combined with Chemometric Methods for the Classification of Polyethylene Residues Containing Different Contaminants [Internet]. Journal of Polymers and the Environment. 2022 ;( 14 p. ja ):[citado 2024 jun. 27 ] Available from: https://doi.org/10.1007/s10924-022-02396-3
Vancouver
Silva DJ da, Wiebeck H. ATR-FTIR Spectroscopy Combined with Chemometric Methods for the Classification of Polyethylene Residues Containing Different Contaminants [Internet]. Journal of Polymers and the Environment. 2022 ;( 14 p. ja ):[citado 2024 jun. 27 ] Available from: https://doi.org/10.1007/s10924-022-02396-3
Parte de monografia/livro
Determinando a distribuição de tempo de residência em extrusora através de medidas de luminância (2022)
Silva, Daniel José da ; Hui,Wang Shu
Source: Open Science Research. Unidade: EP
Subjects: PROCESSAMENTO DE ALIMENTOS, EXTRUSÃO, POLÍMEROS (MATERIAIS)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Daniel José da e HUI, Wang Shu. Determinando a distribuição de tempo de residência em extrusora através de medidas de luminância. Open Science Research. Tradução . Guaruja, SP: Editora Científica Digital, 2022. . . Acesso em: 27 jun. 2024.
APA
Silva, D. J. da, & Hui, W. S. (2022). Determinando a distribuição de tempo de residência em extrusora através de medidas de luminância. In Open Science Research. Guaruja, SP: Editora Científica Digital. doi:10.37885/220408724
NLM
Silva DJ da, Hui WS. Determinando a distribuição de tempo de residência em extrusora através de medidas de luminância. In: Open Science Research. Guaruja, SP: Editora Científica Digital; 2022. [citado 2024 jun. 27 ]
Vancouver
Silva DJ da, Hui WS. Determinando a distribuição de tempo de residência em extrusora através de medidas de luminância. In: Open Science Research. Guaruja, SP: Editora Científica Digital; 2022. [citado 2024 jun. 27 ]
Parte de monografia/livro
Avaliação do uso de extrato de bagaçode uva como ecoaditivo antimicrobiano para embalagens alimentícias multifuncionais de polipropileno (2022)
Silva, Daniel José da ; Oliveira, Matheus Mendes de; Wang, Shu Hui ; Carastan, Danilo Justino
Source: Open Science Research. Unidade: EP
Subjects: EMBALAGENS, UVA, ALIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Daniel José da et al. Avaliação do uso de extrato de bagaçode uva como ecoaditivo antimicrobiano para embalagens alimentícias multifuncionais de polipropileno. Open Science Research. Tradução . Guarujá, SP: Editora Científica Digital, 2022. . Disponível em: https://doi.org/10.37885/220408725. Acesso em: 27 jun. 2024.
APA
Silva, D. J. da, Oliveira, M. M. de, Wang, S. H., & Carastan, D. J. (2022). Avaliação do uso de extrato de bagaçode uva como ecoaditivo antimicrobiano para embalagens alimentícias multifuncionais de polipropileno. In Open Science Research. Guarujá, SP: Editora Científica Digital. doi:10.37885/220408725
NLM
Silva DJ da, Oliveira MM de, Wang SH, Carastan DJ. Avaliação do uso de extrato de bagaçode uva como ecoaditivo antimicrobiano para embalagens alimentícias multifuncionais de polipropileno [Internet]. In: Open Science Research. Guarujá, SP: Editora Científica Digital; 2022. [citado 2024 jun. 27 ] Available from: https://doi.org/10.37885/220408725
Vancouver
Silva DJ da, Oliveira MM de, Wang SH, Carastan DJ. Avaliação do uso de extrato de bagaçode uva como ecoaditivo antimicrobiano para embalagens alimentícias multifuncionais de polipropileno [Internet]. In: Open Science Research. Guarujá, SP: Editora Científica Digital; 2022. [citado 2024 jun. 27 ] Available from: https://doi.org/10.37885/220408725
Artigo de periodico
Compatibility, mechanical, and rheological properties of graphene oxide-containing ethylene-propylene-diene monomer (EPDM) compounds (2022)
Barros, Natalia Garrotte de ; Freitas, Flavia Leticia Silva ; Valera, Ticiane Sanches
Source: Express Polymer Letters. Unidade: EP
Subjects: NANOCOMPOSITOS, REFORÇO, BORRACHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARROS, Natalia Garrotte de e FREITAS, Flavia Leticia Silva e VALERA, Ticiane Sanches. Compatibility, mechanical, and rheological properties of graphene oxide-containing ethylene-propylene-diene monomer (EPDM) compounds. Express Polymer Letters, v. 16, n. 11, p. 1145-1160, 2022Tradução . . Disponível em: https://doi.org/10.3144/expresspolymlett.2022.84. Acesso em: 27 jun. 2024.
APA
Barros, N. G. de, Freitas, F. L. S., & Valera, T. S. (2022). Compatibility, mechanical, and rheological properties of graphene oxide-containing ethylene-propylene-diene monomer (EPDM) compounds. Express Polymer Letters, 16( 11), 1145-1160. doi:10.3144/expresspolymlett.2022.84
NLM
Barros NG de, Freitas FLS, Valera TS. Compatibility, mechanical, and rheological properties of graphene oxide-containing ethylene-propylene-diene monomer (EPDM) compounds [Internet]. Express Polymer Letters. 2022 ; 16( 11): 1145-1160.[citado 2024 jun. 27 ] Available from: https://doi.org/10.3144/expresspolymlett.2022.84
Vancouver
Barros NG de, Freitas FLS, Valera TS. Compatibility, mechanical, and rheological properties of graphene oxide-containing ethylene-propylene-diene monomer (EPDM) compounds [Internet]. Express Polymer Letters. 2022 ; 16( 11): 1145-1160.[citado 2024 jun. 27 ] Available from: https://doi.org/10.3144/expresspolymlett.2022.84
Artigo de periodico
Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites (2022)
Medeiros, Leonardo Iusuti de ; Medeiros, Nila Cecília de Faria Lopes ; Silva, Guilherme Frederico Bernardo Lenz e ; Lima, Rodrigo Gabas Amaro ; Amaral-Labat, Gisele Aparecida ; Boss, Alan Fernando Ney ; Baldan, Mauricio Ribeiro
Source: Materials Research. Unidade: EP
Subjects: INTERFERÊNCIA ELETROMAGNÉTICA, CARBONO, NANOTUBOS DE CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Leonardo Iusuti de et al. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites. Materials Research, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0169. Acesso em: 27 jun. 2024.
APA
Medeiros, L. I. de, Medeiros, N. C. de F. L., Silva, G. F. B. L. e, Lima, R. G. A., Amaral-Labat, G. A., Boss, A. F. N., & Baldan, M. R. (2022). Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites. Materials Research. doi:10.1590/1980-5373-MR-2022-0169
NLM
Medeiros LI de, Medeiros NC de FL, Silva GFBL e, Lima RGA, Amaral-Labat GA, Boss AFN, Baldan MR. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites [Internet]. Materials Research. 2022 ;[citado 2024 jun. 27 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0169
Vancouver
Medeiros LI de, Medeiros NC de FL, Silva GFBL e, Lima RGA, Amaral-Labat GA, Boss AFN, Baldan MR. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites [Internet]. Materials Research. 2022 ;[citado 2024 jun. 27 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0169
Artigo de periodico
Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide (2022)
Morais, Luara da Costa; Beneduce Neto, Flavio ; Magnabosco, Rodrigo ; Silva, André Luiz Nunis da
Source: International Journal of Refractory Metals and Hard Materials. Unidade: EP
Subjects: COMPOSIÇÃO QUÍMICA, CINÉTICA, MECÂNICA DA FRATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Luara da Costa et al. Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide. International Journal of Refractory Metals and Hard Materials, v. 105, p. 9 , 2022Tradução . . Disponível em: https://doi.org/10.1016/j.ijrmhm.2022.105826. Acesso em: 27 jun. 2024.
APA
Morais, L. da C., Beneduce Neto, F., Magnabosco, R., & Silva, A. L. N. da. (2022). Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide. International Journal of Refractory Metals and Hard Materials, 105, 9 . doi:10.1016/j.ijrmhm.2022.105826
NLM
Morais L da C, Beneduce Neto F, Magnabosco R, Silva ALN da. Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide [Internet]. International Journal of Refractory Metals and Hard Materials. 2022 ; 105 9 .[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.ijrmhm.2022.105826
Vancouver
Morais L da C, Beneduce Neto F, Magnabosco R, Silva ALN da. Effect of TiC content on the carbide particle growth of NbC-Ni cemented carbide [Internet]. International Journal of Refractory Metals and Hard Materials. 2022 ; 105 9 .[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.ijrmhm.2022.105826
Artigo de periodico
Conductivity and transmittance enhancement of PEDOT:PSS thin films by graphene addition (2022)
Mabilia, Felipe Teixeira; Hui,Wang Shu
Source: Nanomaterials Science & Engineering. Unidade: EP
Subjects: MICROSCOPIA ELETRÔNICA DE VARREDURA, TENACIDADE DOS MATERIAIS, NANOCOMPOSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MABILIA, Felipe Teixeira e HUI, Wang Shu. Conductivity and transmittance enhancement of PEDOT:PSS thin films by graphene addition. Nanomaterials Science & Engineering, v. 4, n. 1, p. 27-37, 2022Tradução . . Disponível em: https://doi.org/10.34624/nmse.v4i1.29374. Acesso em: 27 jun. 2024.
APA
Mabilia, F. T., & Hui, W. S. (2022). Conductivity and transmittance enhancement of PEDOT:PSS thin films by graphene addition. Nanomaterials Science & Engineering, 4( 1), 27-37. doi:10.34624/nmse.v4i1.29374
NLM
Mabilia FT, Hui WS. Conductivity and transmittance enhancement of PEDOT:PSS thin films by graphene addition [Internet]. Nanomaterials Science & Engineering. 2022 ; 4( 1): 27-37.[citado 2024 jun. 27 ] Available from: https://doi.org/10.34624/nmse.v4i1.29374
Vancouver
Mabilia FT, Hui WS. Conductivity and transmittance enhancement of PEDOT:PSS thin films by graphene addition [Internet]. Nanomaterials Science & Engineering. 2022 ; 4( 1): 27-37.[citado 2024 jun. 27 ] Available from: https://doi.org/10.34624/nmse.v4i1.29374
Artigo de periodico
Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats (2021)
Sakaguti, Katia Yabunaka ; Wang, Shu Hui
Source: Journal of the Brazilian Chemical Society. Unidade: EP
Subjects: MICROSCOPIA ELETRÔNICA DE VARREDURA, POLÍMEROS (MATERIAIS), BIOMATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAKAGUTI, Katia Yabunaka e WANG, Shu Hui. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats. Journal of the Brazilian Chemical Society, v. 32, p. 355-362, 2021Tradução . . Disponível em: https://doi.org/10.21577/0103-5053.20200186. Acesso em: 27 jun. 2024.
APA
Sakaguti, K. Y., & Wang, S. H. (2021). Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats. Journal of the Brazilian Chemical Society, 32, 355-362. doi:10.21577/0103-5053.20200186
NLM
Sakaguti KY, Wang SH. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats [Internet]. Journal of the Brazilian Chemical Society. 2021 ;32 355-362.[citado 2024 jun. 27 ] Available from: https://doi.org/10.21577/0103-5053.20200186
Vancouver
Sakaguti KY, Wang SH. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats [Internet]. Journal of the Brazilian Chemical Society. 2021 ;32 355-362.[citado 2024 jun. 27 ] Available from: https://doi.org/10.21577/0103-5053.20200186
Artigo de periodico
Different electrode anodes used in OLED devices (2021)
Santos, Emerson Roberto ; Fullenbach, Thiago de Carvalho; Medeiros, Marina Sparvoli; Zambom, Luís da Silva ; Onmori, Roberto Koji ; Wang, Shu Hui
Source: Revista Brasileira de Aplicações a Vácuo. Unidade: EP
Subjects: TENSÃO DOS MATERIAIS, ELETRODO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Emerson Roberto et al. Different electrode anodes used in OLED devices. Revista Brasileira de Aplicações a Vácuo, v. 40, 2021Tradução . . Disponível em: https://doi.org/10.17563/rbav.v40.1205. Acesso em: 27 jun. 2024.
APA
Santos, E. R., Fullenbach, T. de C., Medeiros, M. S., Zambom, L. da S., Onmori, R. K., & Wang, S. H. (2021). Different electrode anodes used in OLED devices. Revista Brasileira de Aplicações a Vácuo, 40. doi:10.17563/rbav.v40.1205
NLM
Santos ER, Fullenbach T de C, Medeiros MS, Zambom L da S, Onmori RK, Wang SH. Different electrode anodes used in OLED devices [Internet]. Revista Brasileira de Aplicações a Vácuo. 2021 ; 40[citado 2024 jun. 27 ] Available from: https://doi.org/10.17563/rbav.v40.1205
Vancouver
Santos ER, Fullenbach T de C, Medeiros MS, Zambom L da S, Onmori RK, Wang SH. Different electrode anodes used in OLED devices [Internet]. Revista Brasileira de Aplicações a Vácuo. 2021 ; 40[citado 2024 jun. 27 ] Available from: https://doi.org/10.17563/rbav.v40.1205
Artigo de periodico
Biodegradable nanocomposite microcapsules for controlled release of urea (2021)
Arjona, Jéssica de Carvalho ; Silva-Valenzuela, Maria das Graças da ; Wang, Shu Hui ; Valenzuela Díaz, Francisco Rolando
Source: Polymers. Unidade: EP
Subjects: UREIA, BIODEGRADAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARJONA, Jéssica de Carvalho et al. Biodegradable nanocomposite microcapsules for controlled release of urea. Polymers, n. 5, p. 1-12, 2021Tradução . . Disponível em: https://doi.org/10.3390/polym13050722. Acesso em: 27 jun. 2024.
APA
Arjona, J. de C., Silva-Valenzuela, M. das G. da, Wang, S. H., & Valenzuela Díaz, F. R. (2021). Biodegradable nanocomposite microcapsules for controlled release of urea. Polymers, ( 5), 1-12. doi:10.3390/polym13050722
NLM
Arjona J de C, Silva-Valenzuela M das G da, Wang SH, Valenzuela Díaz FR. Biodegradable nanocomposite microcapsules for controlled release of urea [Internet]. Polymers. 2021 ;( 5): 1-12.[citado 2024 jun. 27 ] Available from: https://doi.org/10.3390/polym13050722
Vancouver
Arjona J de C, Silva-Valenzuela M das G da, Wang SH, Valenzuela Díaz FR. Biodegradable nanocomposite microcapsules for controlled release of urea [Internet]. Polymers. 2021 ;( 5): 1-12.[citado 2024 jun. 27 ] Available from: https://doi.org/10.3390/polym13050722
Artigo de periodico
Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties (2020)
Ariza Echeverri, Edwan Anderson ; Masoumi, Mohammad ; Nishikawa, Arthur Seiji ; Mesa Grajales, Dairo Hernán ; Marquez-Rossy, A. E.; Tschiptschin, André Paulo
Source: Materials and Design. Unidade: EP
Subjects: AÇO, TEXTURA, CRISTALOGRAFIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARIZA ECHEVERRI, Edwan Anderson et al. Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties. Materials and Design, v. 186, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.matdes.2019.108329. Acesso em: 27 jun. 2024.
APA
Ariza Echeverri, E. A., Masoumi, M., Nishikawa, A. S., Mesa Grajales, D. H., Marquez-Rossy, A. E., & Tschiptschin, A. P. (2020). Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties. Materials and Design, 186. doi:10.1016/j.matdes.2019.108329
NLM
Ariza Echeverri EA, Masoumi M, Nishikawa AS, Mesa Grajales DH, Marquez-Rossy AE, Tschiptschin AP. Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties [Internet]. Materials and Design. 2020 ; 186[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.matdes.2019.108329
Vancouver
Ariza Echeverri EA, Masoumi M, Nishikawa AS, Mesa Grajales DH, Marquez-Rossy AE, Tschiptschin AP. Development of a new generation of quench and partitioning steels: Influence of processing parameters on texture, nanoindentation, and mechanical properties [Internet]. Materials and Design. 2020 ; 186[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.matdes.2019.108329
Artigo de periodico
Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution (2020)
Ramirez, Oscar Mauricio Prada ; Queiroz, Fernanda Martins ; Tunes, Matheus Araujo ; Antunes, Renato Altobelli; Rodrigues, Cleber Lima ; Lanzutti, Alex; Pogatscher, Stefan; Olivier, Marie-Georges Marjorie ; Melo, Hercílio Gomes de
Source: Applied Surface Science. Unidades: IF, EP
Subjects: TEMPERATURA, ÍONS, ELETROQUÍMICA, ESPECTROSCOPIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMIREZ, Oscar Mauricio Prada et al. Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution. Applied Surface Science, v. 534, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.apsusc.2020.147634. Acesso em: 27 jun. 2024.
APA
Ramirez, O. M. P., Queiroz, F. M., Tunes, M. A., Antunes, R. A., Rodrigues, C. L., Lanzutti, A., et al. (2020). Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution. Applied Surface Science, 534. doi:10.1016/j.apsusc.2020.147634
NLM
Ramirez OMP, Queiroz FM, Tunes MA, Antunes RA, Rodrigues CL, Lanzutti A, Pogatscher S, Olivier M-GM, Melo HG de. Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution [Internet]. Applied Surface Science. 2020 ; 534[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.apsusc.2020.147634
Vancouver
Ramirez OMP, Queiroz FM, Tunes MA, Antunes RA, Rodrigues CL, Lanzutti A, Pogatscher S, Olivier M-GM, Melo HG de. Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution [Internet]. Applied Surface Science. 2020 ; 534[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.apsusc.2020.147634
Artigo de periodico
Microstructures of building materials from Huaca de la Luna, Peru (2020)
Zanchetta, Liz de Mello ; Quattrone, Marco ; Aguilar, Rafael ; Kahn, Henrique ; Vieira Coelho, A. C. ; John, Vanderley Moacyr
Source: International Journal of Architectural Heritage: conservation, analysis and restoration. Unidade: EP
Subjects: MATERIAIS DE CONSTRUÇÃO, ARQUEOLOGIA HISTÓRICA, TIJOLOS, PATRIMÔNIO ARQUEOLÓGICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANCHETTA, Liz de Mello et al. Microstructures of building materials from Huaca de la Luna, Peru. International Journal of Architectural Heritage: conservation, analysis and restoration, v. 14, n. 2, p. 256-273, 2020Tradução . . Disponível em: https://doi.org/10.1080/15583058.2018.1531181. Acesso em: 27 jun. 2024.
APA
Zanchetta, L. de M., Quattrone, M., Aguilar, R., Kahn, H., Vieira Coelho, A. C., & John, V. M. (2020). Microstructures of building materials from Huaca de la Luna, Peru. International Journal of Architectural Heritage: conservation, analysis and restoration, 14( 2), 256-273. doi:10.1080/15583058.2018.1531181
NLM
Zanchetta L de M, Quattrone M, Aguilar R, Kahn H, Vieira Coelho AC, John VM. Microstructures of building materials from Huaca de la Luna, Peru [Internet]. International Journal of Architectural Heritage: conservation, analysis and restoration. 2020 ; 14( 2): 256-273.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1080/15583058.2018.1531181
Vancouver
Zanchetta L de M, Quattrone M, Aguilar R, Kahn H, Vieira Coelho AC, John VM. Microstructures of building materials from Huaca de la Luna, Peru [Internet]. International Journal of Architectural Heritage: conservation, analysis and restoration. 2020 ; 14( 2): 256-273.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1080/15583058.2018.1531181
Artigo de periodico
On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding (2020)
Avelar, Alan Matias ; Mourão, Marcelo Breda ; Maturana, Marcos Coelho ; Giovedi, Claudia ; Abe, Alfredo Yuuitiro; Pedrassani, Rafaela; Su, Jian
Source: Annals of Nuclear Energy. Unidade: EP
Subjects: SEGURANÇA NUCLEAR, AÇO INOXIDÁVEL, HIDROGÊNIO, AÇO INOXIDÁVEL AUSTENÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AVELAR, Alan Matias et al. On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding. Annals of Nuclear Energy, v. 149, p. 8 107775, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.anucene.2020.107775. Acesso em: 27 jun. 2024.
APA
Avelar, A. M., Mourão, M. B., Maturana, M. C., Giovedi, C., Abe, A. Y., Pedrassani, R., & Su, J. (2020). On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding. Annals of Nuclear Energy, 149, 8 107775. doi:10.1016/j.anucene.2020.107775
NLM
Avelar AM, Mourão MB, Maturana MC, Giovedi C, Abe AY, Pedrassani R, Su J. On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding [Internet]. Annals of Nuclear Energy. 2020 ; 149 8 107775.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.anucene.2020.107775
Vancouver
Avelar AM, Mourão MB, Maturana MC, Giovedi C, Abe AY, Pedrassani R, Su J. On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding [Internet]. Annals of Nuclear Energy. 2020 ; 149 8 107775.[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.anucene.2020.107775
Artigo de periodico
Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels (2020)
Silva, Carlos Alberto da; Varela, Luis Bernardo; Kolawole, Funsho Olaitan ; Tschiptschin, André Paulo ; Panossian, Zehbour
Source: Wear. Unidade: EP
Subjects: CORROSÃO, AÇO CARBONO, EROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Carlos Alberto da et al. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, v. 452–453, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203282. Acesso em: 27 jun. 2024.
APA
Silva, C. A. da, Varela, L. B., Kolawole, F. O., Tschiptschin, A. P., & Panossian, Z. (2020). Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, 452–453. doi:10.1016/j.wear.2020.203282
NLM
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.wear.2020.203282
Vancouver
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 jun. 27 ] Available from: https://doi.org/10.1016/j.wear.2020.203282

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration