ReP USP - Resultado da busca

Trabalho de evento
Work environment thermal evaluation with underfloor air supply applied to a commercial building in Rio de Janeiro, Brazil (2000)
Leite, Brenda Chaves Coelho ; Tribess, Arlindo ; Ornstein, Sheila Walbe
Fonte: Proceedings. Nome do evento: International Conference on Air Distribution in Rooms. Unidades: FAU, EP
Assuntos: ARQUITETURA, AVALIAÇÃO PÓS-OCUPAÇÃO, CONFORTO TÉRMICO, EDIFÍCIOS COMERCIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEITE, Brenda Chaves Coelho e TRIBESS, Arlindo e ORNSTEIN, Sheila Walbe. Work environment thermal evaluation with underfloor air supply applied to a commercial building in Rio de Janeiro, Brazil. 2000, Anais.. Kidlington: Elsevier, 2000. Disponível em: https://repositorio.usp.br/directbitstream/95b1cb20-3a2b-424a-817c-944ecfca5d26/Tribess-2000-work%20environment%20thermal%20evaluation-ROOMVENT.pdf. Acesso em: 02 nov. 2024.
APA
Leite, B. C. C., Tribess, A., & Ornstein, S. W. (2000). Work environment thermal evaluation with underfloor air supply applied to a commercial building in Rio de Janeiro, Brazil. In Proceedings. Kidlington: Elsevier. Recuperado de https://repositorio.usp.br/directbitstream/95b1cb20-3a2b-424a-817c-944ecfca5d26/Tribess-2000-work%20environment%20thermal%20evaluation-ROOMVENT.pdf
NLM
Leite BCC, Tribess A, Ornstein SW. Work environment thermal evaluation with underfloor air supply applied to a commercial building in Rio de Janeiro, Brazil [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/95b1cb20-3a2b-424a-817c-944ecfca5d26/Tribess-2000-work%20environment%20thermal%20evaluation-ROOMVENT.pdf
Vancouver
Leite BCC, Tribess A, Ornstein SW. Work environment thermal evaluation with underfloor air supply applied to a commercial building in Rio de Janeiro, Brazil [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/95b1cb20-3a2b-424a-817c-944ecfca5d26/Tribess-2000-work%20environment%20thermal%20evaluation-ROOMVENT.pdf
Trabalho de evento
A mechatronics approach for HVAC performance improvement in intelligent buildings (2000)
Miyagi, Paulo Eigi ; Villani, Emília ; Maruyama, Newton
Fonte: Proceedings. Nome do evento: Mechatronics Forum International Conference. Unidade: EP
Assuntos: MECATRÔNICA, EDIFÍCIOS INTELIGENTES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIYAGI, Paulo Eigi e VILLANI, Emília e MARUYAMA, Newton. A mechatronics approach for HVAC performance improvement in intelligent buildings. 2000, Anais.. Oxford: Pergamon, 2000. Disponível em: https://repositorio.usp.br/directbitstream/05fe3148-cb4a-400e-9c4b-902b2f3fd726/Maruyama-2000-A%20MECHATRONICS%20APPROACH%20FOR%20HVAC%20PERFORMANCE%20IMPROVEMENT%20IN%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Miyagi, P. E., Villani, E., & Maruyama, N. (2000). A mechatronics approach for HVAC performance improvement in intelligent buildings. In Proceedings. Oxford: Pergamon. Recuperado de https://repositorio.usp.br/directbitstream/05fe3148-cb4a-400e-9c4b-902b2f3fd726/Maruyama-2000-A%20MECHATRONICS%20APPROACH%20FOR%20HVAC%20PERFORMANCE%20IMPROVEMENT%20IN%20ok.pdf
NLM
Miyagi PE, Villani E, Maruyama N. A mechatronics approach for HVAC performance improvement in intelligent buildings [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/05fe3148-cb4a-400e-9c4b-902b2f3fd726/Maruyama-2000-A%20MECHATRONICS%20APPROACH%20FOR%20HVAC%20PERFORMANCE%20IMPROVEMENT%20IN%20ok.pdf
Vancouver
Miyagi PE, Villani E, Maruyama N. A mechatronics approach for HVAC performance improvement in intelligent buildings [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/05fe3148-cb4a-400e-9c4b-902b2f3fd726/Maruyama-2000-A%20MECHATRONICS%20APPROACH%20FOR%20HVAC%20PERFORMANCE%20IMPROVEMENT%20IN%20ok.pdf
Trabalho de evento
Strategies for energy conservatior in air conditioning for office buildings in Brazil (2000)
Vittorino, Fulvio; Akutsu, Maria; Tribess, Arlindo ; Hernandez Neto, Alberto
Fonte: Proceedings. Nome do evento: CIB Symposium on Construction & Environment Theory Into Practice. Unidade: EP
Assuntos: AR CONDICIONADO, ENERGIA, CONSERVAÇÃO DE ENERGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VITTORINO, Fulvio et al. Strategies for energy conservatior in air conditioning for office buildings in Brazil. 2000, Anais.. São Paulo: CIB / PCC-EPUSP, 2000. Disponível em: https://repositorio.usp.br/directbitstream/cc30fb21-0109-4993-b827-9e04359887f0/Tribess-2000-Strategies%20for%20energy%20conservation%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Vittorino, F., Akutsu, M., Tribess, A., & Hernandez Neto, A. (2000). Strategies for energy conservatior in air conditioning for office buildings in Brazil. In Proceedings. São Paulo: CIB / PCC-EPUSP. Recuperado de https://repositorio.usp.br/directbitstream/cc30fb21-0109-4993-b827-9e04359887f0/Tribess-2000-Strategies%20for%20energy%20conservation%20ok.pdf
NLM
Vittorino F, Akutsu M, Tribess A, Hernandez Neto A. Strategies for energy conservatior in air conditioning for office buildings in Brazil [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/cc30fb21-0109-4993-b827-9e04359887f0/Tribess-2000-Strategies%20for%20energy%20conservation%20ok.pdf
Vancouver
Vittorino F, Akutsu M, Tribess A, Hernandez Neto A. Strategies for energy conservatior in air conditioning for office buildings in Brazil [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/cc30fb21-0109-4993-b827-9e04359887f0/Tribess-2000-Strategies%20for%20energy%20conservation%20ok.pdf
Trabalho de evento
A comparative analysis between analytical and FE-based models for flexible pipes subjected to axisymmetric loads (2000)
Ramos Júnior, Roberto ; Pesce, Celso Pupo ; Martins, Clóvis de Arruda
Fonte: Proceedings. Nome do evento: International Offshore and Polar Engineering Conference. Unidade: EP
Assuntos: MECÂNICA DAS ESTRUTURAS, MÉTODO DOS ELEMENTOS FINITOS, TUBOS FLEXÍVEIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS JÚNIOR, Roberto e PESCE, Celso Pupo e MARTINS, Clóvis de Arruda. A comparative analysis between analytical and FE-based models for flexible pipes subjected to axisymmetric loads. 2000, Anais.. Cupertino: ISOPE, 2000. Disponível em: https://repositorio.usp.br/directbitstream/5dbf9712-0824-4abb-9093-6306f26e88b4/Martins_CA-2000-A%20Comparative%20Analysis%20Between%20Analytical%20and%20FE-Based%20Models%20for%20Flexible%20Pipes%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Ramos Júnior, R., Pesce, C. P., & Martins, C. de A. (2000). A comparative analysis between analytical and FE-based models for flexible pipes subjected to axisymmetric loads. In Proceedings. Cupertino: ISOPE. Recuperado de https://repositorio.usp.br/directbitstream/5dbf9712-0824-4abb-9093-6306f26e88b4/Martins_CA-2000-A%20Comparative%20Analysis%20Between%20Analytical%20and%20FE-Based%20Models%20for%20Flexible%20Pipes%20ok.pdf
NLM
Ramos Júnior R, Pesce CP, Martins C de A. A comparative analysis between analytical and FE-based models for flexible pipes subjected to axisymmetric loads [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/5dbf9712-0824-4abb-9093-6306f26e88b4/Martins_CA-2000-A%20Comparative%20Analysis%20Between%20Analytical%20and%20FE-Based%20Models%20for%20Flexible%20Pipes%20ok.pdf
Vancouver
Ramos Júnior R, Pesce CP, Martins C de A. A comparative analysis between analytical and FE-based models for flexible pipes subjected to axisymmetric loads [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/5dbf9712-0824-4abb-9093-6306f26e88b4/Martins_CA-2000-A%20Comparative%20Analysis%20Between%20Analytical%20and%20FE-Based%20Models%20for%20Flexible%20Pipes%20ok.pdf
Trabalho de evento
Automatic generation of metamodels to design production systems control (2000)
Santos Filho, Diolino Jose dos ; Matsusaki, Cristina Toshie Motohashi; Silva, Emílio Carlos Nelli ; Miyagi, Paulo Eigi
Fonte: Proceedings. Nome do evento: Mechatronics Forum International Conference. Unidade: EP
Assunto: INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Diolino Jose dos et al. Automatic generation of metamodels to design production systems control. 2000, Anais.. Oxford: Pergamon, 2000. Disponível em: https://repositorio.usp.br/directbitstream/287a9d5c-8bd9-409f-b7cc-12be019cf7fa/SilvaE-2000-AUTOMATIC%20GENERATION%20OF%20METAMODELS%20TO%20DESIGN%20PRODUCTION%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Santos Filho, D. J. dos, Matsusaki, C. T. M., Silva, E. C. N., & Miyagi, P. E. (2000). Automatic generation of metamodels to design production systems control. In Proceedings. Oxford: Pergamon. Recuperado de https://repositorio.usp.br/directbitstream/287a9d5c-8bd9-409f-b7cc-12be019cf7fa/SilvaE-2000-AUTOMATIC%20GENERATION%20OF%20METAMODELS%20TO%20DESIGN%20PRODUCTION%20ok.pdf
NLM
Santos Filho DJ dos, Matsusaki CTM, Silva ECN, Miyagi PE. Automatic generation of metamodels to design production systems control [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/287a9d5c-8bd9-409f-b7cc-12be019cf7fa/SilvaE-2000-AUTOMATIC%20GENERATION%20OF%20METAMODELS%20TO%20DESIGN%20PRODUCTION%20ok.pdf
Vancouver
Santos Filho DJ dos, Matsusaki CTM, Silva ECN, Miyagi PE. Automatic generation of metamodels to design production systems control [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/287a9d5c-8bd9-409f-b7cc-12be019cf7fa/SilvaE-2000-AUTOMATIC%20GENERATION%20OF%20METAMODELS%20TO%20DESIGN%20PRODUCTION%20ok.pdf
Trabalho de evento
A hybrid modelling approach for HVAC system integration in intelligent buildings (2000)
Villani, Emília ; Miyagi, Paulo Eigi ; Maruyama, Newton
Fonte: Proceedings. Nome do evento: International Conference on Automation of Mixed Processes : hybrid dynamic systems. Unidade: EP
Assuntos: AR CONDICIONADO, CONFORTO TÉRMICO, AQUECIMENTO, EDIFÍCIOS INTELIGENTES, VENTILAÇÃO, AUTOMAÇÃO PREDIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VILLANI, Emília e MIYAGI, Paulo Eigi e MARUYAMA, Newton. A hybrid modelling approach for HVAC system integration in intelligent buildings. 2000, Anais.. Dortmund: University Dortmund, 2000. Disponível em: https://repositorio.usp.br/directbitstream/1ef92ea9-d611-4143-a000-65e3998eff87/Maruyama-2000-a%20hybrid%20modelling%20approach%20for%20HVAC.pdf. Acesso em: 02 nov. 2024.
APA
Villani, E., Miyagi, P. E., & Maruyama, N. (2000). A hybrid modelling approach for HVAC system integration in intelligent buildings. In Proceedings. Dortmund: University Dortmund. Recuperado de https://repositorio.usp.br/directbitstream/1ef92ea9-d611-4143-a000-65e3998eff87/Maruyama-2000-a%20hybrid%20modelling%20approach%20for%20HVAC.pdf
NLM
Villani E, Miyagi PE, Maruyama N. A hybrid modelling approach for HVAC system integration in intelligent buildings [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/1ef92ea9-d611-4143-a000-65e3998eff87/Maruyama-2000-a%20hybrid%20modelling%20approach%20for%20HVAC.pdf
Vancouver
Villani E, Miyagi PE, Maruyama N. A hybrid modelling approach for HVAC system integration in intelligent buildings [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/1ef92ea9-d611-4143-a000-65e3998eff87/Maruyama-2000-a%20hybrid%20modelling%20approach%20for%20HVAC.pdf
Trabalho de evento
An anthropocentric approach for the design of production: systens control (2000)
Miyagi, Paulo Eigi ; Maruyama, Newton ; Santos Filho, Diolino Jose dos
Fonte: Proceedings. Nome do evento: Mechatronics Forum International Conference. Unidade: EP
Assunto: INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MIYAGI, Paulo Eigi e MARUYAMA, Newton e SANTOS FILHO, Diolino Jose dos. An anthropocentric approach for the design of production: systens control. 2000, Anais.. Oxford: Pergamon, 2000. Disponível em: https://repositorio.usp.br/directbitstream/48b4b988-d3db-46fa-9f24-ff5d475ba119/Maruyama-2000-AN%20ANTHROPOCENTRIC%20APPROACH%20FOR%20THE%20DESIGN%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Miyagi, P. E., Maruyama, N., & Santos Filho, D. J. dos. (2000). An anthropocentric approach for the design of production: systens control. In Proceedings. Oxford: Pergamon. Recuperado de https://repositorio.usp.br/directbitstream/48b4b988-d3db-46fa-9f24-ff5d475ba119/Maruyama-2000-AN%20ANTHROPOCENTRIC%20APPROACH%20FOR%20THE%20DESIGN%20ok.pdf
NLM
Miyagi PE, Maruyama N, Santos Filho DJ dos. An anthropocentric approach for the design of production: systens control [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/48b4b988-d3db-46fa-9f24-ff5d475ba119/Maruyama-2000-AN%20ANTHROPOCENTRIC%20APPROACH%20FOR%20THE%20DESIGN%20ok.pdf
Vancouver
Miyagi PE, Maruyama N, Santos Filho DJ dos. An anthropocentric approach for the design of production: systens control [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/48b4b988-d3db-46fa-9f24-ff5d475ba119/Maruyama-2000-AN%20ANTHROPOCENTRIC%20APPROACH%20FOR%20THE%20DESIGN%20ok.pdf
Trabalho de evento
Towards the formatization of the information system of material management in manufacturing process (2000)
Tavares, José Jean-Paul Zanlucchi de Souza; Batalha, Gilmar Ferreira ; Silva, José Reinaldo
Fonte: Proceedings. Nome do evento: World Congress on intelligent Manufacturing Processes & Systems. Unidade: EP
Assuntos: SISTEMAS DE PRODUÇÃO (CONTROLE), INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAVARES, José Jean-Paul Zanlucchi de Souza e BATALHA, Gilmar Ferreira e SILVA, José Reinaldo. Towards the formatization of the information system of material management in manufacturing process. 2000, Anais.. Cambridge, Massachussetts: International Institution Engineering Research, 2000. Disponível em: https://repositorio.usp.br/directbitstream/84a27342-4e01-4aaf-bcf8-bd7c96384766/Batalha-2000-Towards%20the%20formalization%20of%20the%20information%20system.pdf. Acesso em: 02 nov. 2024.
APA
Tavares, J. J. -P. Z. de S., Batalha, G. F., & Silva, J. R. (2000). Towards the formatization of the information system of material management in manufacturing process. In Proceedings. Cambridge, Massachussetts: International Institution Engineering Research. Recuperado de https://repositorio.usp.br/directbitstream/84a27342-4e01-4aaf-bcf8-bd7c96384766/Batalha-2000-Towards%20the%20formalization%20of%20the%20information%20system.pdf
NLM
Tavares JJ-PZ de S, Batalha GF, Silva JR. Towards the formatization of the information system of material management in manufacturing process [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/84a27342-4e01-4aaf-bcf8-bd7c96384766/Batalha-2000-Towards%20the%20formalization%20of%20the%20information%20system.pdf
Vancouver
Tavares JJ-PZ de S, Batalha GF, Silva JR. Towards the formatization of the information system of material management in manufacturing process [Internet]. Proceedings. 2000 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/84a27342-4e01-4aaf-bcf8-bd7c96384766/Batalha-2000-Towards%20the%20formalization%20of%20the%20information%20system.pdf
Trabalho de evento
Some remarks on the structural behavior of flexible pipes subjected to axial loading (1999)
Ramos Júnior, Roberto ; Pesce, Celso Pupo ; Martins, Clóvis de Arruda
Fonte: Proceedings. Nome do evento: Workshop on Subsea Pipelines. Unidade: EP
Assunto: MECÂNICA DAS ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMOS JÚNIOR, Roberto e PESCE, Celso Pupo e MARTINS, Clóvis de Arruda. Some remarks on the structural behavior of flexible pipes subjected to axial loading. 1999, Anais.. Rio de Janeiro: Universidade Federal do Rio de Janeiro, 1999. Disponível em: https://repositorio.usp.br/directbitstream/ca4c3d21-3fc4-4609-bc82-d9552cfa1ecf/Martins_CA-1999-some%20remarks%20on%20the%20structural.pdf. Acesso em: 02 nov. 2024.
APA
Ramos Júnior, R., Pesce, C. P., & Martins, C. de A. (1999). Some remarks on the structural behavior of flexible pipes subjected to axial loading. In Proceedings. Rio de Janeiro: Universidade Federal do Rio de Janeiro. Recuperado de https://repositorio.usp.br/directbitstream/ca4c3d21-3fc4-4609-bc82-d9552cfa1ecf/Martins_CA-1999-some%20remarks%20on%20the%20structural.pdf
NLM
Ramos Júnior R, Pesce CP, Martins C de A. Some remarks on the structural behavior of flexible pipes subjected to axial loading [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ca4c3d21-3fc4-4609-bc82-d9552cfa1ecf/Martins_CA-1999-some%20remarks%20on%20the%20structural.pdf
Vancouver
Ramos Júnior R, Pesce CP, Martins C de A. Some remarks on the structural behavior of flexible pipes subjected to axial loading [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ca4c3d21-3fc4-4609-bc82-d9552cfa1ecf/Martins_CA-1999-some%20remarks%20on%20the%20structural.pdf
Trabalho de evento
Systematization for the automation of the fixture planning (1999)
Souza, M. A.; Horikawa, Oswaldo
Fonte: Proceedings. Nome do evento: International Conference on CAD - CAM and Robotics and Factories of the Future CARS & FOF'99. Unidade: EP
Assuntos: COMPUTAÇÃO APLICADA, CIÊNCIAS EXATAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, M. A. e HORIKAWA, Oswaldo. Systematization for the automation of the fixture planning. 1999, Anais.. Campinas: Technological Center for Informatics Foundation Automation Institute, 1999. Disponível em: https://repositorio.usp.br/directbitstream/7b3a48cc-2eea-44d8-bcad-84d0ee375a5e/Horikawa-1999-systematization%20for%20the%20automation%20of%20the%20fixture%20planning.pdf. Acesso em: 02 nov. 2024.
APA
Souza, M. A., & Horikawa, O. (1999). Systematization for the automation of the fixture planning. In Proceedings. Campinas: Technological Center for Informatics Foundation Automation Institute. Recuperado de https://repositorio.usp.br/directbitstream/7b3a48cc-2eea-44d8-bcad-84d0ee375a5e/Horikawa-1999-systematization%20for%20the%20automation%20of%20the%20fixture%20planning.pdf
NLM
Souza MA, Horikawa O. Systematization for the automation of the fixture planning [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/7b3a48cc-2eea-44d8-bcad-84d0ee375a5e/Horikawa-1999-systematization%20for%20the%20automation%20of%20the%20fixture%20planning.pdf
Vancouver
Souza MA, Horikawa O. Systematization for the automation of the fixture planning [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/7b3a48cc-2eea-44d8-bcad-84d0ee375a5e/Horikawa-1999-systematization%20for%20the%20automation%20of%20the%20fixture%20planning.pdf
Trabalho de evento
Parametric analysis of steel catenary risers under extreme loads (1999)
Martins, Clóvis de Arruda ; Harada, C A N; Costa, A B
Fonte: Proceedings. Nome do evento: International Offshore and Polar Engineering Conference. Unidade: EP
Assuntos: ESTRUTURAS OFFSHORE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Clóvis de Arruda e HARADA, C A N e COSTA, A B. Parametric analysis of steel catenary risers under extreme loads. 1999, Anais.. Cupertino: International Society of Offshore and Polar Engineers, 1999. Disponível em: https://repositorio.usp.br/directbitstream/b19b0723-57b8-4fca-9815-3505abbe48db/Martins_CA-1999-Parametric%20analysis%20of%20steel%20catenary%20risers%20under%20extreme%20loads.pdf. Acesso em: 02 nov. 2024.
APA
Martins, C. de A., Harada, C. A. N., & Costa, A. B. (1999). Parametric analysis of steel catenary risers under extreme loads. In Proceedings. Cupertino: International Society of Offshore and Polar Engineers. Recuperado de https://repositorio.usp.br/directbitstream/b19b0723-57b8-4fca-9815-3505abbe48db/Martins_CA-1999-Parametric%20analysis%20of%20steel%20catenary%20risers%20under%20extreme%20loads.pdf
NLM
Martins C de A, Harada CAN, Costa AB. Parametric analysis of steel catenary risers under extreme loads [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/b19b0723-57b8-4fca-9815-3505abbe48db/Martins_CA-1999-Parametric%20analysis%20of%20steel%20catenary%20risers%20under%20extreme%20loads.pdf
Vancouver
Martins C de A, Harada CAN, Costa AB. Parametric analysis of steel catenary risers under extreme loads [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/b19b0723-57b8-4fca-9815-3505abbe48db/Martins_CA-1999-Parametric%20analysis%20of%20steel%20catenary%20risers%20under%20extreme%20loads.pdf
Trabalho de evento
The magnetic bearing for precision applications (1999)
Horikawa, Oswaldo ; Silva, I. D.
Fonte: Proceedings. Nome do evento: International Conference and General Meeting of the European Society for Precision Engineering and Nanotechnology. Unidade: EP
Assuntos: CONTROLE (TEORIA DE SISTEMAS E CONTROLE), ELEMENTOS DE MÁQUINAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HORIKAWA, Oswaldo e SILVA, I. D. The magnetic bearing for precision applications. 1999, Anais.. Bremen: EUSPEN, 1999. Disponível em: https://repositorio.usp.br/directbitstream/2c1b19e0-8078-42dd-9867-5b5c0e96358c/Horikawa-1999-the%20magnetic%20bearing%20for%20precision%20applications.pdf. Acesso em: 02 nov. 2024.
APA
Horikawa, O., & Silva, I. D. (1999). The magnetic bearing for precision applications. In Proceedings. Bremen: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/2c1b19e0-8078-42dd-9867-5b5c0e96358c/Horikawa-1999-the%20magnetic%20bearing%20for%20precision%20applications.pdf
NLM
Horikawa O, Silva ID. The magnetic bearing for precision applications [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/2c1b19e0-8078-42dd-9867-5b5c0e96358c/Horikawa-1999-the%20magnetic%20bearing%20for%20precision%20applications.pdf
Vancouver
Horikawa O, Silva ID. The magnetic bearing for precision applications [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/2c1b19e0-8078-42dd-9867-5b5c0e96358c/Horikawa-1999-the%20magnetic%20bearing%20for%20precision%20applications.pdf
Trabalho de evento
Analytical and closed form solutions for deep water riser-like eigenvalve problem (1999)
Pesce, Celso Pupo ; Fujarra, André Luis Condino ; Simos, Alexandre Nicolaos ; Tannuri, Eduardo Aoun
Fonte: Proceedings. Nome do evento: International Offshore and Polar Engineering Conference. Unidade: EP
Assuntos: DINÂMICA DAS ESTRUTURAS, ESTRUTURAS OFFSHORE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PESCE, Celso Pupo et al. Analytical and closed form solutions for deep water riser-like eigenvalve problem. 1999, Anais.. Cupertino: International Society of Offshore and Polar Engineers, 1999. Disponível em: https://repositorio.usp.br/directbitstream/16ff89d6-5322-4d43-9e15-f0c68e47ace7/Pesce-1999-Analytical%20and%20closed%20form%20solutions%20for%20deep%20water%20riser-like%20eigenvalve%20problem.pdf. Acesso em: 02 nov. 2024.
APA
Pesce, C. P., Fujarra, A. L. C., Simos, A. N., & Tannuri, E. A. (1999). Analytical and closed form solutions for deep water riser-like eigenvalve problem. In Proceedings. Cupertino: International Society of Offshore and Polar Engineers. Recuperado de https://repositorio.usp.br/directbitstream/16ff89d6-5322-4d43-9e15-f0c68e47ace7/Pesce-1999-Analytical%20and%20closed%20form%20solutions%20for%20deep%20water%20riser-like%20eigenvalve%20problem.pdf
NLM
Pesce CP, Fujarra ALC, Simos AN, Tannuri EA. Analytical and closed form solutions for deep water riser-like eigenvalve problem [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/16ff89d6-5322-4d43-9e15-f0c68e47ace7/Pesce-1999-Analytical%20and%20closed%20form%20solutions%20for%20deep%20water%20riser-like%20eigenvalve%20problem.pdf
Vancouver
Pesce CP, Fujarra ALC, Simos AN, Tannuri EA. Analytical and closed form solutions for deep water riser-like eigenvalve problem [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/16ff89d6-5322-4d43-9e15-f0c68e47ace7/Pesce-1999-Analytical%20and%20closed%20form%20solutions%20for%20deep%20water%20riser-like%20eigenvalve%20problem.pdf
Trabalho de evento
A computational model of synaptic metaplasticity (1999)
Ropero Peláez, Francisco Javier; Simões, Marcelo Godoy
Fonte: Proceedings. Nome do evento: International Joint Conference on Neural Networks. Unidade: EP
Assuntos: MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROPERO PELÁEZ, Francisco Javier e SIMÕES, Marcelo Godoy. A computational model of synaptic metaplasticity. 1999, Anais.. New York: IEEE, 1999. Disponível em: https://repositorio.usp.br/directbitstream/b0b5fc06-5e86-49ae-b34e-19e8d0ac0142/Simoes-1999-a%20computational%20model%20a%20synaptic%20metaplasticity.pdf. Acesso em: 02 nov. 2024.
APA
Ropero Peláez, F. J., & Simões, M. G. (1999). A computational model of synaptic metaplasticity. In Proceedings. New York: IEEE. Recuperado de https://repositorio.usp.br/directbitstream/b0b5fc06-5e86-49ae-b34e-19e8d0ac0142/Simoes-1999-a%20computational%20model%20a%20synaptic%20metaplasticity.pdf
NLM
Ropero Peláez FJ, Simões MG. A computational model of synaptic metaplasticity [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/b0b5fc06-5e86-49ae-b34e-19e8d0ac0142/Simoes-1999-a%20computational%20model%20a%20synaptic%20metaplasticity.pdf
Vancouver
Ropero Peláez FJ, Simões MG. A computational model of synaptic metaplasticity [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/b0b5fc06-5e86-49ae-b34e-19e8d0ac0142/Simoes-1999-a%20computational%20model%20a%20synaptic%20metaplasticity.pdf
Trabalho de evento
Design of flextensional transducers using the homogenization design method (1999)
Silva, Emílio Carlos Nelli ; Nishiwaki, Shinji; Kikuchi, N.
Fonte: Proceedings. Nome do evento: International Symposium on Smart Structures and Materials. Unidade: EP
Assunto: TRANSDUTORES SONICOS E ULTRASONICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Emílio Carlos Nelli e NISHIWAKI, Shinji e KIKUCHI, N. Design of flextensional transducers using the homogenization design method. 1999, Anais.. California: SPIE, 1999. Disponível em: https://repositorio.usp.br/directbitstream/f44ba3f7-8253-4e6d-9f33-084fe08e846b/Silva_E-1999-Design%20of%20flextensional%20transducers%20using%20the%20homogenization%20design%20method.%20SPIE.pdf. Acesso em: 02 nov. 2024.
APA
Silva, E. C. N., Nishiwaki, S., & Kikuchi, N. (1999). Design of flextensional transducers using the homogenization design method. In Proceedings. California: SPIE. Recuperado de https://repositorio.usp.br/directbitstream/f44ba3f7-8253-4e6d-9f33-084fe08e846b/Silva_E-1999-Design%20of%20flextensional%20transducers%20using%20the%20homogenization%20design%20method.%20SPIE.pdf
NLM
Silva ECN, Nishiwaki S, Kikuchi N. Design of flextensional transducers using the homogenization design method [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/f44ba3f7-8253-4e6d-9f33-084fe08e846b/Silva_E-1999-Design%20of%20flextensional%20transducers%20using%20the%20homogenization%20design%20method.%20SPIE.pdf
Vancouver
Silva ECN, Nishiwaki S, Kikuchi N. Design of flextensional transducers using the homogenization design method [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/f44ba3f7-8253-4e6d-9f33-084fe08e846b/Silva_E-1999-Design%20of%20flextensional%20transducers%20using%20the%20homogenization%20design%20method.%20SPIE.pdf
Trabalho de evento
EFSO-turret system stability and wave heading (1999)
Leite, André Jacques de Paiva; Simos, Alexandre Nicolaos ; Tannuri, Eduardo Aoun ; Pesce, Celso Pupo
Fonte: Proceedings. Nome do evento: International Offshore and Polar Engineering Conference. Unidade: EP
Assunto: DINÂMICA DAS ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEITE, André Jacques de Paiva et al. EFSO-turret system stability and wave heading. 1999, Anais.. Cupertino: International Society of Offshore and Polar Engineers, 1999. Disponível em: https://repositorio.usp.br/directbitstream/3766c2bb-15bb-4c0a-aa47-66a869b26713/Pesce-1999-FPSO-Turret%20System%20Stability%20and%20Wave%20Heading%20ok.pdf. Acesso em: 02 nov. 2024.
APA
Leite, A. J. de P., Simos, A. N., Tannuri, E. A., & Pesce, C. P. (1999). EFSO-turret system stability and wave heading. In Proceedings. Cupertino: International Society of Offshore and Polar Engineers. Recuperado de https://repositorio.usp.br/directbitstream/3766c2bb-15bb-4c0a-aa47-66a869b26713/Pesce-1999-FPSO-Turret%20System%20Stability%20and%20Wave%20Heading%20ok.pdf
NLM
Leite AJ de P, Simos AN, Tannuri EA, Pesce CP. EFSO-turret system stability and wave heading [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/3766c2bb-15bb-4c0a-aa47-66a869b26713/Pesce-1999-FPSO-Turret%20System%20Stability%20and%20Wave%20Heading%20ok.pdf
Vancouver
Leite AJ de P, Simos AN, Tannuri EA, Pesce CP. EFSO-turret system stability and wave heading [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/3766c2bb-15bb-4c0a-aa47-66a869b26713/Pesce-1999-FPSO-Turret%20System%20Stability%20and%20Wave%20Heading%20ok.pdf
Trabalho de evento
Augmentation of heat transfer by longitudinal vortices in plate-fin heat exchangers with two rows of tubes (1999)
Rodrigues Junior, Rogerio; Yanagihara, Jurandir Itizo
Fonte: Proceedings. Nome do evento: ASME JSME thermal engineering joint conference. Unidade: EP
Assunto: TRANSFERÊNCIA DE CALOR
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES JUNIOR, Rogerio e YANAGIHARA, Jurandir Itizo. Augmentation of heat transfer by longitudinal vortices in plate-fin heat exchangers with two rows of tubes. 1999, Anais.. San Diego, CA: Asme, 1999. Disponível em: https://repositorio.usp.br/directbitstream/4732e5d6-c9e4-471a-9512-674f13922c7b/Yanagihara-1999-augmentation%20of%20heat%20transfer.pdf. Acesso em: 02 nov. 2024.
APA
Rodrigues Junior, R., & Yanagihara, J. I. (1999). Augmentation of heat transfer by longitudinal vortices in plate-fin heat exchangers with two rows of tubes. In Proceedings. San Diego, CA: Asme. Recuperado de https://repositorio.usp.br/directbitstream/4732e5d6-c9e4-471a-9512-674f13922c7b/Yanagihara-1999-augmentation%20of%20heat%20transfer.pdf
NLM
Rodrigues Junior R, Yanagihara JI. Augmentation of heat transfer by longitudinal vortices in plate-fin heat exchangers with two rows of tubes [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/4732e5d6-c9e4-471a-9512-674f13922c7b/Yanagihara-1999-augmentation%20of%20heat%20transfer.pdf
Vancouver
Rodrigues Junior R, Yanagihara JI. Augmentation of heat transfer by longitudinal vortices in plate-fin heat exchangers with two rows of tubes [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/4732e5d6-c9e4-471a-9512-674f13922c7b/Yanagihara-1999-augmentation%20of%20heat%20transfer.pdf
Trabalho de evento
Planar two-link manipulator control with multiple-synapse neural network controller (1999)
Baptista Filho, B. D.; Cabral, Eduardo Lobo Lustosa
Fonte: Proceedings. Nome do evento: IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Unidade: EP
Assuntos: INTELIGÊNCIA ARTIFICIAL, TEORIA DE SISTEMAS E CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BAPTISTA FILHO, B. D. e CABRAL, Eduardo Lobo Lustosa. Planar two-link manipulator control with multiple-synapse neural network controller. 1999, Anais.. New York: IEEE, 1999. Disponível em: https://repositorio.usp.br/directbitstream/ea6d8fb0-8ad5-4e8e-97da-0ac0377a6127/Cabral-1999-PLANAR%20TWO-LINK%20MANIPULATOR.pdf. Acesso em: 02 nov. 2024.
APA
Baptista Filho, B. D., & Cabral, E. L. L. (1999). Planar two-link manipulator control with multiple-synapse neural network controller. In Proceedings. New York: IEEE. Recuperado de https://repositorio.usp.br/directbitstream/ea6d8fb0-8ad5-4e8e-97da-0ac0377a6127/Cabral-1999-PLANAR%20TWO-LINK%20MANIPULATOR.pdf
NLM
Baptista Filho BD, Cabral ELL. Planar two-link manipulator control with multiple-synapse neural network controller [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ea6d8fb0-8ad5-4e8e-97da-0ac0377a6127/Cabral-1999-PLANAR%20TWO-LINK%20MANIPULATOR.pdf
Vancouver
Baptista Filho BD, Cabral ELL. Planar two-link manipulator control with multiple-synapse neural network controller [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ea6d8fb0-8ad5-4e8e-97da-0ac0377a6127/Cabral-1999-PLANAR%20TWO-LINK%20MANIPULATOR.pdf
Trabalho de evento
Cellular neural networks in active vision system (1999)
Okamoto Junior, Jun ; Milanova, Mariofanna; Buker, U.
Fonte: Proceedings. Nome do evento: International Seminar on Bioelectronic Interfaces. Unidade: EP
Assunto: INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OKAMOTO JUNIOR, Jun e MILANOVA, Mariofanna e BUKER, U. Cellular neural networks in active vision system. 1999, Anais.. Campinas: Centro de Tecnologia para Informática, 1999. Disponível em: https://repositorio.usp.br/directbitstream/8331d18c-8c2f-414e-b1f1-1257de597b64/Okamoto-1999-CELLULAR%20NEURAL%20NETWORKS%20IN%20ACTIVE.pdf. Acesso em: 02 nov. 2024.
APA
Okamoto Junior, J., Milanova, M., & Buker, U. (1999). Cellular neural networks in active vision system. In Proceedings. Campinas: Centro de Tecnologia para Informática. Recuperado de https://repositorio.usp.br/directbitstream/8331d18c-8c2f-414e-b1f1-1257de597b64/Okamoto-1999-CELLULAR%20NEURAL%20NETWORKS%20IN%20ACTIVE.pdf
NLM
Okamoto Junior J, Milanova M, Buker U. Cellular neural networks in active vision system [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/8331d18c-8c2f-414e-b1f1-1257de597b64/Okamoto-1999-CELLULAR%20NEURAL%20NETWORKS%20IN%20ACTIVE.pdf
Vancouver
Okamoto Junior J, Milanova M, Buker U. Cellular neural networks in active vision system [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/8331d18c-8c2f-414e-b1f1-1257de597b64/Okamoto-1999-CELLULAR%20NEURAL%20NETWORKS%20IN%20ACTIVE.pdf
Trabalho de evento
Automatic generation of finishing tool path for sculptured surface machining (1999)
Tsuzuki, Marcos de Sales Guerra
Fonte: Proceedings. Nome do evento: International Conference on CAD - CAM and Robotics and Factories of the Future CARS & FOF'99. Unidade: EP
Assunto: INTELIGÊNCIA ARTIFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TSUZUKI, Marcos de Sales Guerra. Automatic generation of finishing tool path for sculptured surface machining. 1999, Anais.. Campinas: Technological Center for Informatics Foundations Automation Institute, 1999. Disponível em: https://repositorio.usp.br/directbitstream/ed784255-6dfd-4780-9dd5-0adf9a539cf4/Tsuzuki-1999-automatic%20generation%20of%20finishing%20tool-Conference%20CAD%20CAM.pdf. Acesso em: 02 nov. 2024.
APA
Tsuzuki, M. de S. G. (1999). Automatic generation of finishing tool path for sculptured surface machining. In Proceedings. Campinas: Technological Center for Informatics Foundations Automation Institute. Recuperado de https://repositorio.usp.br/directbitstream/ed784255-6dfd-4780-9dd5-0adf9a539cf4/Tsuzuki-1999-automatic%20generation%20of%20finishing%20tool-Conference%20CAD%20CAM.pdf
NLM
Tsuzuki M de SG. Automatic generation of finishing tool path for sculptured surface machining [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ed784255-6dfd-4780-9dd5-0adf9a539cf4/Tsuzuki-1999-automatic%20generation%20of%20finishing%20tool-Conference%20CAD%20CAM.pdf
Vancouver
Tsuzuki M de SG. Automatic generation of finishing tool path for sculptured surface machining [Internet]. Proceedings. 1999 ;[citado 2024 nov. 02 ] Available from: https://repositorio.usp.br/directbitstream/ed784255-6dfd-4780-9dd5-0adf9a539cf4/Tsuzuki-1999-automatic%20generation%20of%20finishing%20tool-Conference%20CAD%20CAM.pdf

Unidades USP

ReP

Filtros

Departamento

Autores

Autores USP

Ano de publicação

Assuntos

Editora

Nome do evento

País de publicação

Afiliação dos autores externos não normalizada