A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JASINEVICIUS, Renato Goulart e GRANADO, Renê Mendes e CIRINO, Giuseppe Antonio. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 jul. 2024.
APA
Jasinevicius, R. G., Granado, R. M., & Cirino, G. A. (2013). Diamond tool wear analysis during machining of microstructure surface for microinjection molding. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
Vancouver
Jasinevicius RG, Granado RM, Cirino GA. Diamond tool wear analysis during machining of microstructure surface for microinjection molding. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAVAREZ JUNIOR, Laercio et al. Design and construction of a novel assisted tool-holder. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf. Acesso em: 09 jul. 2024.
APA
Javarez Junior, L., Duduch, J. G., Gonçalves, A. M., & Otoboni, J. A. (2013). Design and construction of a novel assisted tool-holder. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
NLM
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Vancouver
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIMA, Rodrigo Mendes e MASSAROPPI JÚNIOR, Ernesto. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf. Acesso em: 09 jul. 2024.
APA
Lima, R. M., & Massaroppi Júnior, E. (2013). Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
NLM
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
Vancouver
Lima RM, Massaroppi Júnior E. Kinematic constitutive modeling of an aluminum alloy under cyclic fatigue [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/2506.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Murilo Fonseca e SILVA, Iris Bento da. Total productive maintenance methodology as a tool to develop people in a manufacture area. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 jul. 2024.
APA
Souza, M. F., & Silva, I. B. da. (2013). Total productive maintenance methodology as a tool to develop people in a manufacture area. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Souza MF, Silva IB da. Total productive maintenance methodology as a tool to develop people in a manufacture area. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
Vancouver
Souza MF, Silva IB da. Total productive maintenance methodology as a tool to develop people in a manufacture area. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ENDO, Marcos Tan e MONTAGNOLI, Arlindo Neto e NICOLETTI, Rodrigo. Measurement of rotor vibration through photographic images. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf. Acesso em: 09 jul. 2024.
APA
Endo, M. T., Montagnoli, A. N., & Nicoletti, R. (2013). Measurement of rotor vibration through photographic images. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
NLM
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
Vancouver
Endo MT, Montagnoli AN, Nicoletti R. Measurement of rotor vibration through photographic images [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/7185268e-2302-4cc0-98f7-136e70907af0/OK___trabalho%2021%20-%20Measurement%20of%20Rotor%20Vibration%20Through%20Photographic%20Images%20%28COBEM%202013%29.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOGAJI, Taye Stephen e RIBATSKI, Gherhardt. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf. Acesso em: 09 jul. 2024.
APA
Mogaji, T. S., & Ribatski, G. (2013). Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
NLM
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
Vancouver
Mogaji TS, Ribatski G. Enhancement and prediction of flow boiling heat transfer inside horizontal tubes containing twisted-tape inserts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/f1151d5e-2061-4846-9c33-a66720ea431a/PROD_25705_SYSNO_3125415.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GRANADO, Renê Mendes e JASINEVICIUS, Renato Goulart e CIRINO, Giuseppe Antonio. Microinjection evaluation of a diamond turned diffraction optical element. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 jul. 2024.
APA
Granado, R. M., Jasinevicius, R. G., & Cirino, G. A. (2013). Microinjection evaluation of a diamond turned diffraction optical element. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
Vancouver
Granado RM, Jasinevicius RG, Cirino GA. Microinjection evaluation of a diamond turned diffraction optical element. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. A testbed for wireless networked control systems based on can and zigbee. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf. Acesso em: 09 jul. 2024.
APA
Godoy, E. P., Oliveira, T. de A., Diniz, I. S., & Porto, A. J. V. (2013). A testbed for wireless networked control systems based on can and zigbee. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
NLM
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Vancouver
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIGATTI, Aldo Marcel Yoshida et al. Computational method for calculation of the specific cutting energy. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf. Acesso em: 09 jul. 2024.
APA
Rigatti, A. M. Y., Assis, C. L. F. de, Coelho, R. T., Jasinevicius, R. G., & Rodrigues, A. R. (2013). Computational method for calculation of the specific cutting energy. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
NLM
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
Vancouver
Rigatti AMY, Assis CLF de, Coelho RT, Jasinevicius RG, Rodrigues AR. Computational method for calculation of the specific cutting energy [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2013/PDF/576.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELSCHER, Patrick et al. Open loop response identification during non-stationary operation of actively controlled rotating systems. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf. Acesso em: 09 jul. 2024.
APA
Felscher, P., Dornbusch, F., Markert, R., & Nicoletti, R. (2013). Open loop response identification during non-stationary operation of actively controlled rotating systems. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
NLM
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Vancouver
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUKVIC, G. et al. Influence of ceramic binders on mechanical properties and finishing of green machined alumina. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. . Acesso em: 09 jul. 2024.
APA
Bukvic, G., Fiocchi, A. A., Sanchez, L. E. A., Purquerio, B. de M., & Fortulan, C. A. (2013). Influence of ceramic binders on mechanical properties and finishing of green machined alumina. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Bukvic G, Fiocchi AA, Sanchez LEA, Purquerio B de M, Fortulan CA. Influence of ceramic binders on mechanical properties and finishing of green machined alumina. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
Vancouver
Bukvic G, Fiocchi AA, Sanchez LEA, Purquerio B de M, Fortulan CA. Influence of ceramic binders on mechanical properties and finishing of green machined alumina. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAMPAIO, Diego Luchesi e NICOLETTI, Rodrigo. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf. Acesso em: 09 jul. 2024.
APA
Sampaio, D. L., & Nicoletti, R. (2013). Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
NLM
Sampaio DL, Nicoletti R. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
Vancouver
Sampaio DL, Nicoletti R. Approximated entropy algorithm applied to the characterization of the vibration of cracked shafts [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/74bbddcd-3163-4c50-9adc-7a4122865a62/OK___trabalho%2022%20-%20Approximated%20Entropy%20Algorithm%20Applied%20to%20the%20Characterization%20of%20the%20Vibration%20of%20Cracked%20Shafts%20%28COBEM%202013%29%20%281%29.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KANIZAWA, Fabio Toshio e RIBATSKI, Gherhardt. Modeling and analysis of a cascade cryogenic refrigerator. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf. Acesso em: 09 jul. 2024.
APA
Kanizawa, F. T., & Ribatski, G. (2013). Modeling and analysis of a cascade cryogenic refrigerator. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
NLM
Kanizawa FT, Ribatski G. Modeling and analysis of a cascade cryogenic refrigerator [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
Vancouver
Kanizawa FT, Ribatski G. Modeling and analysis of a cascade cryogenic refrigerator [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jul. 09 ] Available from: https://repositorio.usp.br/directbitstream/423e2366-daf3-4904-931c-18014e680e57/PROD_25706_SYSNO_3125424_removed.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VALE, Heleno Murilo Campeão e OLIVEIRA, Claiton e PORTO, Arthur José Vieira. Integrating a virtual environment and a real machining cell to remotely analyze the machining process. 2011, Anais.. Rio de Janeiro, RJ: ABCM, 2011. Disponível em: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF. Acesso em: 09 jul. 2024.
APA
Vale, H. M. C., Oliveira, C., & Porto, A. J. V. (2011). Integrating a virtual environment and a real machining cell to remotely analyze the machining process. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
NLM
Vale HMC, Oliveira C, Porto AJV. Integrating a virtual environment and a real machining cell to remotely analyze the machining process [Internet]. Proceedings of COBEM. 2011 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
Vancouver
Vale HMC, Oliveira C, Porto AJV. Integrating a virtual environment and a real machining cell to remotely analyze the machining process [Internet]. Proceedings of COBEM. 2011 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2011/PDF/261002.PDF
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e PORTO, Arthur José Vieira e INAMASU, Ricardo Yassushi. Using simulation tools in the development of a networked control systems research platform. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 09 jul. 2024.
APA
Godoy, E. P., Porto, A. J. V., & Inamasu, R. Y. (2009). Using simulation tools in the development of a networked control systems research platform. In Proceedings of COBEM. Rio de Janeiro: ABCM.
NLM
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
Vancouver
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e PORTO, Arthur José Vieira e INAMASU, Ricardo Yassushi. Using simulation tools in the development of a networked control systems research platform. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf. Acesso em: 09 jul. 2024.
APA
Godoy, E. P., Porto, A. J. V., & Inamasu, R. Y. (2009). Using simulation tools in the development of a networked control systems research platform. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
NLM
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
Vancouver
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUTTINI, Thiago Malta e NICOLETTI, Rodrigo. Direct synthesis from frequency response measurements applied to the controller design of a servo positioning system. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 09 jul. 2024.
APA
Buttini, T. M., & Nicoletti, R. (2009). Direct synthesis from frequency response measurements applied to the controller design of a servo positioning system. In Proceedings of COBEM. Rio de Janeiro: ABCM.
NLM
Buttini TM, Nicoletti R. Direct synthesis from frequency response measurements applied to the controller design of a servo positioning system. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
Vancouver
Buttini TM, Nicoletti R. Direct synthesis from frequency response measurements applied to the controller design of a servo positioning system. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIVALDINI, Kelen Cristiane Teixeira et al. Automatic routing of forklift robots in warehouse applications. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 09 jul. 2024.
APA
Vivaldini, K. C. T., Moraga Galdames, J. P., Becker, M., & Caurin, G. A. de P. (2009). Automatic routing of forklift robots in warehouse applications. In Proceedings of COBEM. Rio de Janeiro: ABCM.
NLM
Vivaldini KCT, Moraga Galdames JP, Becker M, Caurin GA de P. Automatic routing of forklift robots in warehouse applications. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
Vancouver
Vivaldini KCT, Moraga Galdames JP, Becker M, Caurin GA de P. Automatic routing of forklift robots in warehouse applications. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA, Rogério Melo e et al. The minimum quantity of lubrification (MQL) technique for the use reduction of the cutting fluid. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://www.abcm.org.br/anais/cobem/2009/pdf/COB09-0574.pdf. Acesso em: 09 jul. 2024.
APA
Sousa, R. M. e, Bianchi, E. C., Iceri, D. M., Destro, R. S., Simões, R. P., Aguiar, P. R. de, & Fortulan, C. A. (2009). The minimum quantity of lubrification (MQL) technique for the use reduction of the cutting fluid. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2009/pdf/COB09-0574.pdf
NLM
Sousa RM e, Bianchi EC, Iceri DM, Destro RS, Simões RP, Aguiar PR de, Fortulan CA. The minimum quantity of lubrification (MQL) technique for the use reduction of the cutting fluid [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2009/pdf/COB09-0574.pdf
Vancouver
Sousa RM e, Bianchi EC, Iceri DM, Destro RS, Simões RP, Aguiar PR de, Fortulan CA. The minimum quantity of lubrification (MQL) technique for the use reduction of the cutting fluid [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ] Available from: http://www.abcm.org.br/anais/cobem/2009/pdf/COB09-0574.pdf
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRONCO, Mário Luiz e SILVA, Luciana Leal da e PORTO, Arthur José Vieira. Classification and characterization of environments for indoor maps based mobile robots navigation. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. . Acesso em: 09 jul. 2024.
APA
Tronco, M. L., Silva, L. L. da, & Porto, A. J. V. (2009). Classification and characterization of environments for indoor maps based mobile robots navigation. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM.
NLM
Tronco ML, Silva LL da, Porto AJV. Classification and characterization of environments for indoor maps based mobile robots navigation. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]
Vancouver
Tronco ML, Silva LL da, Porto AJV. Classification and characterization of environments for indoor maps based mobile robots navigation. Proceedings of COBEM. 2009 ;[citado 2024 jul. 09 ]