ReP USP - Resultado da busca

Artigo de periodico
On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads (2024)
Christoff, Bruno Guilherme; Marques, Denys; Carmo, João Paulo Pereira do ; Braga, Maria Helena; Tita, Volnei
Source: Mechanical Systems and Signal Processing. Unidade: EESC
Subjects: POTENCIAL ELÉTRICO, SENSOR, BATERIAS ELÉTRICAS, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads. Mechanical Systems and Signal Processing, v. 215, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ymssp.2024.111390. Acesso em: 30 jun. 2024.
APA
Christoff, B. G., Marques, D., Carmo, J. P. P. do, Braga, M. H., & Tita, V. (2024). On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads. Mechanical Systems and Signal Processing, 215, 1-13. doi:10.1016/j.ymssp.2024.111390
NLM
Christoff BG, Marques D, Carmo JPP do, Braga MH, Tita V. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-13.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111390
Vancouver
Christoff BG, Marques D, Carmo JPP do, Braga MH, Tita V. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-13.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111390
Artigo de periodico
Vibro-acoustic performance of graded piezoelectric metamaterial plates (2024)
Schimidt, Camila Sanches; Oliveira, Leopoldo Pisanelli Rodrigues de ; De Marqui Júnior, Carlos
Source: Composite Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, MATERIAIS, ACÚSTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIMIDT, Camila Sanches e OLIVEIRA, Leopoldo Pisanelli Rodrigues de e DE MARQUI JÚNIOR, Carlos. Vibro-acoustic performance of graded piezoelectric metamaterial plates. Composite Structures, v. 327, p. 1-10, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.compstruct.2023.117656. Acesso em: 30 jun. 2024.
APA
Schimidt, C. S., Oliveira, L. P. R. de, & De Marqui Júnior, C. (2024). Vibro-acoustic performance of graded piezoelectric metamaterial plates. Composite Structures, 327, 1-10. doi:10.1016/j.compstruct.2023.117656
NLM
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Vibro-acoustic performance of graded piezoelectric metamaterial plates [Internet]. Composite Structures. 2024 ; 327 1-10.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117656
Vancouver
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Vibro-acoustic performance of graded piezoelectric metamaterial plates [Internet]. Composite Structures. 2024 ; 327 1-10.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2023.117656
Artigo de periodico
Reconfigurable piezoelectric metamaterial for selective noise directivity (2024)
Schimidt, Camila Sanches; Oliveira, Leopoldo Pisanelli Rodrigues de ; De Marqui Júnior, Carlos
Source: Journal of Sound and Vibration. Unidade: EESC
Subjects: VIBRAÇÕES, ACÚSTICA, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIMIDT, Camila Sanches e OLIVEIRA, Leopoldo Pisanelli Rodrigues de e DE MARQUI JÚNIOR, Carlos. Reconfigurable piezoelectric metamaterial for selective noise directivity. Journal of Sound and Vibration, v. 585, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jsv.2024.118472. Acesso em: 30 jun. 2024.
APA
Schimidt, C. S., Oliveira, L. P. R. de, & De Marqui Júnior, C. (2024). Reconfigurable piezoelectric metamaterial for selective noise directivity. Journal of Sound and Vibration, 585, 1-13. doi:10.1016/j.jsv.2024.118472
NLM
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Reconfigurable piezoelectric metamaterial for selective noise directivity [Internet]. Journal of Sound and Vibration. 2024 ; 585 1-13.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.jsv.2024.118472
Vancouver
Schimidt CS, Oliveira LPR de, De Marqui Júnior C. Reconfigurable piezoelectric metamaterial for selective noise directivity [Internet]. Journal of Sound and Vibration. 2024 ; 585 1-13.[citado 2024 jun. 30 ] Available from: http://dx.doi.org/10.1016/j.jsv.2024.118472
Artigo de periodico
Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations (2023)
Balboni, Bruno Monteiro ; Wessels, C. Brand ; Ribeiro, Marcelo Leite ; Batista, Alessandra Silva ; Garcia, José Nivaldo
Source: Wood Material Science & Engineering. Unidades: EESC, ESALQ
Subjects: ADESIVOS, CISALHAMENTO, EUCALIPTO, LAMINADOS, MADEIRA, VIGAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BALBONI, Bruno Monteiro et al. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations. Wood Material Science & Engineering, p. 1-9, 2023Tradução . . Disponível em: https://doi.org/10.1080/17480272.2023.2208094. Acesso em: 30 jun. 2024.
APA
Balboni, B. M., Wessels, C. B., Ribeiro, M. L., Batista, A. S., & Garcia, J. N. (2023). Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations. Wood Material Science & Engineering, 1-9. doi:10.1080/17480272.2023.2208094
NLM
Balboni BM, Wessels CB, Ribeiro ML, Batista AS, Garcia JN. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations [Internet]. Wood Material Science & Engineering. 2023 ; 1-9.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1080/17480272.2023.2208094
Vancouver
Balboni BM, Wessels CB, Ribeiro ML, Batista AS, Garcia JN. Influence of knots on the adhesion of wood from young Eucalyptus grandis plantations [Internet]. Wood Material Science & Engineering. 2023 ; 1-9.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1080/17480272.2023.2208094
Artigo de periodico
A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle (2023)
Cunha, T. M.; Moreira, M. H.; Santos, M. F.; Angélico, Ricardo Afonso ; Pandolfelli, V. C.
Source: Open Ceramics. Unidade: EESC
Subjects: ISOLAMENTO TÉRMICO, EFICIÊNCIA ENERGÉTICA, REFRATÁRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CUNHA, T. M. et al. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, v. 13, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.oceram.2023.100330. Acesso em: 30 jun. 2024.
APA
Cunha, T. M., Moreira, M. H., Santos, M. F., Angélico, R. A., & Pandolfelli, V. C. (2023). A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle. Open Ceramics, 13, 1-10. doi:10.1016/j.oceram.2023.100330
NLM
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Vancouver
Cunha TM, Moreira MH, Santos MF, Angélico RA, Pandolfelli VC. A simple methodology based on numerical analysis for the drying curve design of a castable lined steel ladle [Internet]. Open Ceramics. 2023 ; 13 1-10.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.oceram.2023.100330
Artigo de periodico
A finite element unified formulation for composite laminates in bending considering progressive damage (2022)
Ferreira, Gregório Felipe Oliveira; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Ferreira, Antonio J. M.; Tita, Volnei
Source: Thin-Walled Structures. Unidade: EESC
Subjects: MECÂNICA DO DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, v. 172, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.tws.2021.108864. Acesso em: 30 jun. 2024.
APA
Ferreira, G. F. O., Almeida Júnior, J. H. S., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2022). A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, 172, 1-13. doi:10.1016/j.tws.2021.108864
NLM
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Vancouver
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Parte de monografia/livro
In-hand manipulation via deep reinforcement learning for industrial robots (2021)
Toledo, Leonardo V. O.; Lahr, Gustavo José Giardini; Caurin, Glauco Augusto de Paula
Source: Multibody Mechatronic Systems: Papers from the MuSMe Conference in 2020. Conference titles: MuSMe Conference. Unidades: EESC, EESC E ICMC
Subjects: APRENDIZADO COMPUTACIONAL, ENGENHARIA MECÂNICA, ROBÓTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOLEDO, Leonardo V. O. e LAHR, Gustavo José Giardini e CAURIN, Glauco Augusto de Paula. In-hand manipulation via deep reinforcement learning for industrial robots. Multibody Mechatronic Systems: Papers from the MuSMe Conference in 2020. Tradução . Cham, Switzerland: Springer, 2021. p. 222-228. Disponível em: https://doi.org/10.1007/978-3-030-60372-4_25. Acesso em: 30 jun. 2024.
APA
Toledo, L. V. O., Lahr, G. J. G., & Caurin, G. A. de P. (2021). In-hand manipulation via deep reinforcement learning for industrial robots. In Multibody Mechatronic Systems: Papers from the MuSMe Conference in 2020 (p. 222-228). Cham, Switzerland: Springer. doi:10.1007/978-3-030-60372-4_25
NLM
Toledo LVO, Lahr GJG, Caurin GA de P. In-hand manipulation via deep reinforcement learning for industrial robots [Internet]. In: Multibody Mechatronic Systems: Papers from the MuSMe Conference in 2020. Cham, Switzerland: Springer; 2021. p. 222-228.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1007/978-3-030-60372-4_25
Vancouver
Toledo LVO, Lahr GJG, Caurin GA de P. In-hand manipulation via deep reinforcement learning for industrial robots [Internet]. In: Multibody Mechatronic Systems: Papers from the MuSMe Conference in 2020. Cham, Switzerland: Springer; 2021. p. 222-228.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1007/978-3-030-60372-4_25
Parte de monografia/livro
The influence of economic context on the relationship between manufacturing strategy, practices and performance (2020)
Gambi, Lillian do Nascimento; Boer, Harry; Boer, Henrike Engele Elisabeth; Gerólamo, Mateus Cecílio
Source: Industrial Engineering and Operations Management. Conference titles: International Joint Conference on Industrial Engineering and Operations Management - IJCIEOM. Unidade: EESC
Subjects: MANUFATURA, ENGENHARIA MECÂNICA, TOMADA DE DECISÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GAMBI, Lillian do Nascimento et al. The influence of economic context on the relationship between manufacturing strategy, practices and performance. Industrial Engineering and Operations Management. Tradução . Cham, Switzerland: Springer, 2020. p. 405-415. Disponível em: https://doi.org/10.1007/978-3-030-56920-4_33. Acesso em: 30 jun. 2024.
APA
Gambi, L. do N., Boer, H., Boer, H. E. E., & Gerólamo, M. C. (2020). The influence of economic context on the relationship between manufacturing strategy, practices and performance. In Industrial Engineering and Operations Management (p. 405-415). Cham, Switzerland: Springer. doi:10.1007/978-3-030-56920-4_33
NLM
Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33
Vancouver
Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33
Artigo de periodico
Enhanced numerical tool to evaluate steel ladle thermal losses (2018)
Santos, Matheus Felipe dos; Moreira, Murilo Henrique; Campos, Maria Gabriela Garcia; Pelissari, Pedro Ivo Batistel Galiote Brossi ; Angélico, Ricardo Afonso ; Sako, Eric Yoshimitsu; Sinnema, S.; Pandolfelli, Victor Carlos
Source: Ceramics International. Unidade: EESC
Subjects: ECONOMIA DE ENERGIA, DESIGN, REFRATÁRIOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Matheus Felipe dos et al. Enhanced numerical tool to evaluate steel ladle thermal losses. Ceramics International, v. 44, p. 12831-12840, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2018.04.092. Acesso em: 30 jun. 2024.
APA
Santos, M. F. dos, Moreira, M. H., Campos, M. G. G., Pelissari, P. I. B. G. B., Angélico, R. A., Sako, E. Y., et al. (2018). Enhanced numerical tool to evaluate steel ladle thermal losses. Ceramics International, 44, 12831-12840. doi:10.1016/j.ceramint.2018.04.092
NLM
Santos MF dos, Moreira MH, Campos MGG, Pelissari PIBGB, Angélico RA, Sako EY, Sinnema S, Pandolfelli VC. Enhanced numerical tool to evaluate steel ladle thermal losses [Internet]. Ceramics International. 2018 ; 44 12831-12840.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.ceramint.2018.04.092
Vancouver
Santos MF dos, Moreira MH, Campos MGG, Pelissari PIBGB, Angélico RA, Sako EY, Sinnema S, Pandolfelli VC. Enhanced numerical tool to evaluate steel ladle thermal losses [Internet]. Ceramics International. 2018 ; 44 12831-12840.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.ceramint.2018.04.092
Artigo de periodico
Chemical modification of sugarcane bagasse and sisal fibers using hydroxymethylated lignin: Influence on impact strength and water absorption of phenolic composites (2018)
Tita, Sandra Patrícia da Silva; Medeiros, R; Tarpani, José Ricardo; Frollini, Elisabete ; Tita, Volnei
Source: Journal of Composite Materials. Unidades: IQSC, EESC
Subjects: TRATAMENTO DE SUPERFÍCIES, FIBRAS VEGETAIS, COMPOSTOS FENÓLICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TITA, Sandra Patrícia da Silva et al. Chemical modification of sugarcane bagasse and sisal fibers using hydroxymethylated lignin: Influence on impact strength and water absorption of phenolic composites. Journal of Composite Materials, v. 52, n. 20, p. 2743-2753, 2018Tradução . . Disponível em: http://journals.sagepub.com/doi/full/10.1177/0021998317753886. Acesso em: 30 jun. 2024.
APA
Tita, S. P. da S., Medeiros, R., Tarpani, J. R., Frollini, E., & Tita, V. (2018). Chemical modification of sugarcane bagasse and sisal fibers using hydroxymethylated lignin: Influence on impact strength and water absorption of phenolic composites. Journal of Composite Materials, 52( 20), 2743-2753. doi:10.1177/0021998317753886
NLM
Tita SP da S, Medeiros R, Tarpani JR, Frollini E, Tita V. Chemical modification of sugarcane bagasse and sisal fibers using hydroxymethylated lignin: Influence on impact strength and water absorption of phenolic composites [Internet]. Journal of Composite Materials. 2018 ;52( 20): 2743-2753.[citado 2024 jun. 30 ] Available from: http://journals.sagepub.com/doi/full/10.1177/0021998317753886
Vancouver
Tita SP da S, Medeiros R, Tarpani JR, Frollini E, Tita V. Chemical modification of sugarcane bagasse and sisal fibers using hydroxymethylated lignin: Influence on impact strength and water absorption of phenolic composites [Internet]. Journal of Composite Materials. 2018 ;52( 20): 2743-2753.[citado 2024 jun. 30 ] Available from: http://journals.sagepub.com/doi/full/10.1177/0021998317753886
Artigo de periodico
Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression (2017)
Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite; Tita, Volnei; Amico, Sandro Campos
Source: Composite Structures. Unidade: EESC
Subjects: ANÁLISE NUMÉRICA, FALHA, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA JÚNIOR, José Humberto Santos et al. Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression. Composite Structures, v. 160, n. Ja 2017, p. 204-210, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2016.10.036. Acesso em: 30 jun. 2024.
APA
Almeida Júnior, J. H. S., Ribeiro, M. L., Tita, V., & Amico, S. C. (2017). Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression. Composite Structures, 160( Ja 2017), 204-210. doi:10.1016/j.compstruct.2016.10.036
NLM
Almeida Júnior JHS, Ribeiro ML, Tita V, Amico SC. Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression [Internet]. Composite Structures. 2017 ; 160( Ja 2017): 204-210.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.compstruct.2016.10.036
Vancouver
Almeida Júnior JHS, Ribeiro ML, Tita V, Amico SC. Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression [Internet]. Composite Structures. 2017 ; 160( Ja 2017): 204-210.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.compstruct.2016.10.036
Artigo de periodico
Computational model for supporting SHM systems design: damage identification via numerical analyses (2017)
Sartorato, Murilo; Medeiros, Ricardo de; Vandepitte, Dirk; Tita, Volnei
Source: Mechanical Systems and Signal Processing. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, PIEZOELETRICIDADE, SENSOR, DANO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SARTORATO, Murilo et al. Computational model for supporting SHM systems design: damage identification via numerical analyses. Mechanical Systems and Signal Processing, v. 84, p. 445-461, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.ymssp.2016.07.035. Acesso em: 30 jun. 2024.
APA
Sartorato, M., Medeiros, R. de, Vandepitte, D., & Tita, V. (2017). Computational model for supporting SHM systems design: damage identification via numerical analyses. Mechanical Systems and Signal Processing, 84, 445-461. doi:10.1016/j.ymssp.2016.07.035
NLM
Sartorato M, Medeiros R de, Vandepitte D, Tita V. Computational model for supporting SHM systems design: damage identification via numerical analyses [Internet]. Mechanical Systems and Signal Processing. 2017 ; 84 445-461.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.ymssp.2016.07.035
Vancouver
Sartorato M, Medeiros R de, Vandepitte D, Tita V. Computational model for supporting SHM systems design: damage identification via numerical analyses [Internet]. Mechanical Systems and Signal Processing. 2017 ; 84 445-461.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.ymssp.2016.07.035
Artigo de periodico
Energy analysis of semi-passive control for an aeroelastic plate-like wing using shunted piezoelectric materials (2016)
Silva, Tarcísio Marinelli Pereira; De Marqui Junior, Carlos
Source: Journal of Intelligent Material Systems and Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, ENERGIA, AEROELASTICIDADE DE AERONAVES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Tarcísio Marinelli Pereira e DE MARQUI JUNIOR, Carlos. Energy analysis of semi-passive control for an aeroelastic plate-like wing using shunted piezoelectric materials. Journal of Intelligent Material Systems and Structures, v. No 2016, n. 19, p. 2599-2615, 2016Tradução . . Disponível em: https://doi.org/10.1177/1045389X16635842. Acesso em: 30 jun. 2024.
APA
Silva, T. M. P., & De Marqui Junior, C. (2016). Energy analysis of semi-passive control for an aeroelastic plate-like wing using shunted piezoelectric materials. Journal of Intelligent Material Systems and Structures, No 2016( 19), 2599-2615. doi:10.1177/1045389X16635842
NLM
Silva TMP, De Marqui Junior C. Energy analysis of semi-passive control for an aeroelastic plate-like wing using shunted piezoelectric materials [Internet]. Journal of Intelligent Material Systems and Structures. 2016 ; No 2016( 19): 2599-2615.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X16635842
Vancouver
Silva TMP, De Marqui Junior C. Energy analysis of semi-passive control for an aeroelastic plate-like wing using shunted piezoelectric materials [Internet]. Journal of Intelligent Material Systems and Structures. 2016 ; No 2016( 19): 2599-2615.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X16635842
Artigo de periodico
Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: experimental and numerical approaches (2016)
Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite; Tita, Volnei; Amico, Sandro Campos
Source: Materials and Design. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, TUBOS, FALHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA JÚNIOR, José Humberto Santos et al. Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: experimental and numerical approaches. Materials and Design, v. 96, p. 431-438, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.matdes.2016.02.054. Acesso em: 30 jun. 2024.
APA
Almeida Júnior, J. H. S., Ribeiro, M. L., Tita, V., & Amico, S. C. (2016). Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: experimental and numerical approaches. Materials and Design, 96, 431-438. doi:10.1016/j.matdes.2016.02.054
NLM
Almeida Júnior JHS, Ribeiro ML, Tita V, Amico SC. Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: experimental and numerical approaches [Internet]. Materials and Design. 2016 ; 96 431-438.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.matdes.2016.02.054
Vancouver
Almeida Júnior JHS, Ribeiro ML, Tita V, Amico SC. Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: experimental and numerical approaches [Internet]. Materials and Design. 2016 ; 96 431-438.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.matdes.2016.02.054
Artigo de periodico
Progressive damage modeling of spiral and ring composite structures for offloading hoses (2016)
Tonatto, Maikson Luiz Passaia; Forte, Maria Madalena de Camargo; Tita, Volnei; Amico, Sandro Campos
Source: Materials and Design. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, DANOS MECÂNICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TONATTO, Maikson Luiz Passaia et al. Progressive damage modeling of spiral and ring composite structures for offloading hoses. Materials and Design, v. 108, p. 374-382, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.matdes.2016.06.124. Acesso em: 30 jun. 2024.
APA
Tonatto, M. L. P., Forte, M. M. de C., Tita, V., & Amico, S. C. (2016). Progressive damage modeling of spiral and ring composite structures for offloading hoses. Materials and Design, 108, 374-382. doi:10.1016/j.matdes.2016.06.124
NLM
Tonatto MLP, Forte MM de C, Tita V, Amico SC. Progressive damage modeling of spiral and ring composite structures for offloading hoses [Internet]. Materials and Design. 2016 ; 108 374-382.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.matdes.2016.06.124
Vancouver
Tonatto MLP, Forte MM de C, Tita V, Amico SC. Progressive damage modeling of spiral and ring composite structures for offloading hoses [Internet]. Materials and Design. 2016 ; 108 374-382.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.matdes.2016.06.124
Artigo de periodico
A comparative assessment of different frequency based damage detection in unidirectional composite plates using MFC sensors (2016)
Medeiros, Ricardo de; Sartorato, Murilo; Vandepitte, Dirk; Tita, Volnei
Source: Journal of Sound and Vibration. Unidade: EESC
Subjects: PIEZOELETRICIDADE, SENSOR, VIBRAÇÕES, DANO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Ricardo de et al. A comparative assessment of different frequency based damage detection in unidirectional composite plates using MFC sensors. Journal of Sound and Vibration, v. No 2016, p. 171-190, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.jsv.2016.06.047. Acesso em: 30 jun. 2024.
APA
Medeiros, R. de, Sartorato, M., Vandepitte, D., & Tita, V. (2016). A comparative assessment of different frequency based damage detection in unidirectional composite plates using MFC sensors. Journal of Sound and Vibration, No 2016, 171-190. doi:10.1016/j.jsv.2016.06.047
NLM
Medeiros R de, Sartorato M, Vandepitte D, Tita V. A comparative assessment of different frequency based damage detection in unidirectional composite plates using MFC sensors [Internet]. Journal of Sound and Vibration. 2016 ; No 2016 171-190.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.jsv.2016.06.047
Vancouver
Medeiros R de, Sartorato M, Vandepitte D, Tita V. A comparative assessment of different frequency based damage detection in unidirectional composite plates using MFC sensors [Internet]. Journal of Sound and Vibration. 2016 ; No 2016 171-190.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.jsv.2016.06.047
Artigo de periodico
Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators (2015)
Nitzsche, Fred; D'Assunção, Douglas; De Marqui Júnior, Carlos
Source: Journal of Intelligent Material Systems and Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, AEROELASTICIDADE DE AERONAVES, ATUADORES PIEZELÉTRICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NITZSCHE, Fred e D'ASSUNÇÃO, Douglas e DE MARQUI JÚNIOR, Carlos. Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators. Journal of Intelligent Material Systems and Structures, v. 26, n. 13, p. 1656-1668, 2015Tradução . . Disponível em: https://doi.org/10.1177/1045389X15572011. Acesso em: 30 jun. 2024.
APA
Nitzsche, F., D'Assunção, D., & De Marqui Júnior, C. (2015). Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators. Journal of Intelligent Material Systems and Structures, 26( 13), 1656-1668. doi:10.1177/1045389X15572011
NLM
Nitzsche F, D'Assunção D, De Marqui Júnior C. Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators [Internet]. Journal of Intelligent Material Systems and Structures. 2015 ; 26( 13): 1656-1668.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X15572011
Vancouver
Nitzsche F, D'Assunção D, De Marqui Júnior C. Aeroelastic control of non-rotating and rotating wings using the dynamic stiffness modulation principle via piezoelectric actuators [Internet]. Journal of Intelligent Material Systems and Structures. 2015 ; 26( 13): 1656-1668.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X15572011
Artigo de periodico
Computational parametric study of low-velocity impact response of composite cylinder for automotive components (2015)
Ribeiro, Marcelo Leite ; Medeiros, Ricardo de
Source: International Journal of Automotive Composites. Unidade: EESC
Subjects: ESTRUTURAS MISTAS, DANO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Marcelo Leite e MEDEIROS, Ricardo de. Computational parametric study of low-velocity impact response of composite cylinder for automotive components. International Journal of Automotive Composites, v. 1, n. 1, p. 112-128, 2015Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/8e02362c-ec63-4436-b3ef-50c112122143/artigo%2015%20-%20Computational%20parametric%20study%20of%20low-velocity%20impact%20response%20of%20composite%20cylinder%20for%20automotive%20components%20%28International%20Journal%20of%20Automotive%20Composites%29.pdf. Acesso em: 30 jun. 2024.
APA
Ribeiro, M. L., & Medeiros, R. de. (2015). Computational parametric study of low-velocity impact response of composite cylinder for automotive components. International Journal of Automotive Composites, 1( 1), 112-128. Recuperado de https://repositorio.usp.br/directbitstream/8e02362c-ec63-4436-b3ef-50c112122143/artigo%2015%20-%20Computational%20parametric%20study%20of%20low-velocity%20impact%20response%20of%20composite%20cylinder%20for%20automotive%20components%20%28International%20Journal%20of%20Automotive%20Composites%29.pdf
NLM
Ribeiro ML, Medeiros R de. Computational parametric study of low-velocity impact response of composite cylinder for automotive components [Internet]. International Journal of Automotive Composites. 2015 ; 1( 1): 112-128.[citado 2024 jun. 30 ] Available from: https://repositorio.usp.br/directbitstream/8e02362c-ec63-4436-b3ef-50c112122143/artigo%2015%20-%20Computational%20parametric%20study%20of%20low-velocity%20impact%20response%20of%20composite%20cylinder%20for%20automotive%20components%20%28International%20Journal%20of%20Automotive%20Composites%29.pdf
Vancouver
Ribeiro ML, Medeiros R de. Computational parametric study of low-velocity impact response of composite cylinder for automotive components [Internet]. International Journal of Automotive Composites. 2015 ; 1( 1): 112-128.[citado 2024 jun. 30 ] Available from: https://repositorio.usp.br/directbitstream/8e02362c-ec63-4436-b3ef-50c112122143/artigo%2015%20-%20Computational%20parametric%20study%20of%20low-velocity%20impact%20response%20of%20composite%20cylinder%20for%20automotive%20components%20%28International%20Journal%20of%20Automotive%20Composites%29.pdf
Artigo de periodico
Applied self-powered semi-passive control for a 2-degree-of-freedom aeroelastic typical section using shunted piezoelectric materials (2015)
D'Assunção, Douglas; De Marqui Júnior, Carlos
Source: Journal of Intelligent Material Systems and Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, VIBRAÇÕES DE AERONAVES, AEROELASTICIDADE DE AERONAVES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
D'ASSUNÇÃO, Douglas e DE MARQUI JÚNIOR, Carlos. Applied self-powered semi-passive control for a 2-degree-of-freedom aeroelastic typical section using shunted piezoelectric materials. Journal of Intelligent Material Systems and Structures, v. 26, n. 4, p. 373-385, 2015Tradução . . Disponível em: https://doi.org/10.1177/1045389X14526797. Acesso em: 30 jun. 2024.
APA
D'Assunção, D., & De Marqui Júnior, C. (2015). Applied self-powered semi-passive control for a 2-degree-of-freedom aeroelastic typical section using shunted piezoelectric materials. Journal of Intelligent Material Systems and Structures, 26( 4), 373-385. doi:10.1177/1045389X14526797
NLM
D'Assunção D, De Marqui Júnior C. Applied self-powered semi-passive control for a 2-degree-of-freedom aeroelastic typical section using shunted piezoelectric materials [Internet]. Journal of Intelligent Material Systems and Structures. 2015 ; 26( 4): 373-385.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X14526797
Vancouver
D'Assunção D, De Marqui Júnior C. Applied self-powered semi-passive control for a 2-degree-of-freedom aeroelastic typical section using shunted piezoelectric materials [Internet]. Journal of Intelligent Material Systems and Structures. 2015 ; 26( 4): 373-385.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1177/1045389X14526797
Artigo de periodico
Experimental analysis of transverse impact loading on composite cylinders (2015)
Ribeiro, Marcelo Leite; Vandepitte, Dirk; Tita, Volnei
Source: Composite Structures. Unidade: EESC
Subjects: ANÁLISE EXPERIMENTAL DE ESTRUTURAS, DANO, ESTRUTURAS (IMPACTO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Marcelo Leite e VANDEPITTE, Dirk e TITA, Volnei. Experimental analysis of transverse impact loading on composite cylinders. Composite Structures, v. 133, p. 547-563, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2015.07.088. Acesso em: 30 jun. 2024.
APA
Ribeiro, M. L., Vandepitte, D., & Tita, V. (2015). Experimental analysis of transverse impact loading on composite cylinders. Composite Structures, 133, 547-563. doi:10.1016/j.compstruct.2015.07.088
NLM
Ribeiro ML, Vandepitte D, Tita V. Experimental analysis of transverse impact loading on composite cylinders [Internet]. Composite Structures. 2015 ; 133 547-563.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.compstruct.2015.07.088
Vancouver
Ribeiro ML, Vandepitte D, Tita V. Experimental analysis of transverse impact loading on composite cylinders [Internet]. Composite Structures. 2015 ; 133 547-563.[citado 2024 jun. 30 ] Available from: https://doi.org/10.1016/j.compstruct.2015.07.088

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration