Menu

Filtros : "Jasinevicius, Renato Goulart" Limpar

Filtros

Refine with date range

1 - 20 (193 records)

  • Trabalho de evento

    Direct laser writing of binary Fresnel Zone Plates for low-cost Shack-Hartmann wavefront sensors (2025)

    Medeiros, Jacilene Martins; von Zuben, Antônio A. Godoy; Jasinevicius, Renato Goulart ; Barêa, Luis Alberto Mijam; Montagnoli, Arlindo Neto ; Diniz, Jose Alexandre; Cirino, Giuseppe Antonio

    Source: Proceedings. Conference titles: SBFoton International Optics and Photonics Conference - IOPC. Unidade: EESC

    Subjects: DISPOSITIVOS ÓPTICOS, SENSORES ÓPTICOS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MEDEIROS, Jacilene Martins et al. Direct laser writing of binary Fresnel Zone Plates for low-cost Shack-Hartmann wavefront sensors. 2025, Anais.. Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2025. Disponível em: https://dx.doi.org/10.1109/SBFotonIOPC66433.2025.11218400. Acesso em: 11 abr. 2026.

    • APA

      Medeiros, J. M., von Zuben, A. A. G., Jasinevicius, R. G., Barêa, L. A. M., Montagnoli, A. N., Diniz, J. A., & Cirino, G. A. (2025). Direct laser writing of binary Fresnel Zone Plates for low-cost Shack-Hartmann wavefront sensors. In Proceedings. Piscataway, NJ, USA: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1109/SBFotonIOPC66433.2025.11218400

    • NLM

      Medeiros JM, von Zuben AAG, Jasinevicius RG, Barêa LAM, Montagnoli AN, Diniz JA, Cirino GA. Direct laser writing of binary Fresnel Zone Plates for low-cost Shack-Hartmann wavefront sensors [Internet]. Proceedings. 2025 ;[citado 2026 abr. 11 ] Available from: https://dx.doi.org/10.1109/SBFotonIOPC66433.2025.11218400

    • Vancouver

      Medeiros JM, von Zuben AAG, Jasinevicius RG, Barêa LAM, Montagnoli AN, Diniz JA, Cirino GA. Direct laser writing of binary Fresnel Zone Plates for low-cost Shack-Hartmann wavefront sensors [Internet]. Proceedings. 2025 ;[citado 2026 abr. 11 ] Available from: https://dx.doi.org/10.1109/SBFotonIOPC66433.2025.11218400

  • Artigo de periodico

    Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition (2025)

    Momeni, Seyedali; Coelho, Reginaldo Teixeira ; Bruno, Danver Messias; Jasinevicius, Renato Goulart

    Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MOMENI, Seyedali et al. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 2491-2517, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15308-1. Acesso em: 11 abr. 2026.

    • APA

      Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 2491-2517. doi:10.1007/s00170-025-15308-1

    • NLM

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1

    • Vancouver

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 2491-2517.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s00170-025-15308-1

  • Artigo de periodico

    Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition (2025)

    Momeni, Seyedali; Coelho, Reginaldo Teixeira ; Bruno, Danver Messias; Jasinevicius, Renato Goulart

    Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MOMENI, Seyedali et al. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, v. 137, p. 6241-6242, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-025-15452-8. Acesso em: 11 abr. 2026.

    • APA

      Momeni, S., Coelho, R. T., Bruno, D. M., & Jasinevicius, R. G. (2025). Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition. International Journal of Advanced Manufacturing Technology, 137, 6241-6242. doi:10.1007/s00170-025-15452-8

    • NLM

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8

    • Vancouver

      Momeni S, Coelho RT, Bruno DM, Jasinevicius RG. Correction to:: Analysis of process parameters in the fabrication of thin-wall Inconel 718 via laser-directed energy deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2025 ; 137 6241-6242.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s00170-025-15452-8

  • Artigo de periodico

    Advances in enhancing the wear performance of Ti-6Al-4V biomedical alloy through Nb2O5 coating (2025)

    Ferreira, Murilo Oliveira Alves ; Wolf, Witor ; Gelamo, Rogerio Valentim ; Slade, Natália Bueno Leite; Galo, Rodrigo ; Jasinevicius, Renato Goulart ; Fortulan, Carlos Alberto ; Moreto, Jéferson Aparecido

    Source: Materials. Unidade: EESC

    Subjects: BIOMATERIAIS, CORROSÃO, DESGASTE DOS MATERIAIS, LIGAS METÁLICAS, MATERIAIS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERREIRA, Murilo Oliveira Alves et al. Advances in enhancing the wear performance of Ti-6Al-4V biomedical alloy through Nb2O5 coating. Materials, v. 18, n. 7, p. 1-20, 2025Tradução . . Disponível em: https://dx.doi.org/10.3390/ma18071593. Acesso em: 11 abr. 2026.

    • APA

      Ferreira, M. O. A., Wolf, W., Gelamo, R. V., Slade, N. B. L., Galo, R., Jasinevicius, R. G., et al. (2025). Advances in enhancing the wear performance of Ti-6Al-4V biomedical alloy through Nb2O5 coating. Materials, 18( 7), 1-20. doi:10.3390/ma18071593

    • NLM

      Ferreira MOA, Wolf W, Gelamo RV, Slade NBL, Galo R, Jasinevicius RG, Fortulan CA, Moreto JA. Advances in enhancing the wear performance of Ti-6Al-4V biomedical alloy through Nb2O5 coating [Internet]. Materials. 2025 ; 18( 7): 1-20.[citado 2026 abr. 11 ] Available from: https://dx.doi.org/10.3390/ma18071593

    • Vancouver

      Ferreira MOA, Wolf W, Gelamo RV, Slade NBL, Galo R, Jasinevicius RG, Fortulan CA, Moreto JA. Advances in enhancing the wear performance of Ti-6Al-4V biomedical alloy through Nb2O5 coating [Internet]. Materials. 2025 ; 18( 7): 1-20.[citado 2026 abr. 11 ] Available from: https://dx.doi.org/10.3390/ma18071593

  • Artigo de periodico

    Minimizing surface roughness and material accumulation in thin-walled square structures via laser powder-DED (2025)

    Momeni, Seyedali; Mecelis, Guilherme Rosati; Jasinevicius, Renato Goulart

    Source: Progress in Additive Manufacturing. Unidade: EESC

    Assunto: ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MOMENI, Seyedali e MECELIS, Guilherme Rosati e JASINEVICIUS, Renato Goulart. Minimizing surface roughness and material accumulation in thin-walled square structures via laser powder-DED. Progress in Additive Manufacturing, p. 1-25, 2025Tradução . . Disponível em: http://dx.doi.org/10.1007/s40964-025-01287-y. Acesso em: 11 abr. 2026.

    • APA

      Momeni, S., Mecelis, G. R., & Jasinevicius, R. G. (2025). Minimizing surface roughness and material accumulation in thin-walled square structures via laser powder-DED. Progress in Additive Manufacturing, 1-25. doi:10.1007/s40964-025-01287-y

    • NLM

      Momeni S, Mecelis GR, Jasinevicius RG. Minimizing surface roughness and material accumulation in thin-walled square structures via laser powder-DED [Internet]. Progress in Additive Manufacturing. 2025 ; 1-25.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s40964-025-01287-y

    • Vancouver

      Momeni S, Mecelis GR, Jasinevicius RG. Minimizing surface roughness and material accumulation in thin-walled square structures via laser powder-DED [Internet]. Progress in Additive Manufacturing. 2025 ; 1-25.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.1007/s40964-025-01287-y

  • Artigo de periodico

    Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions (2024)

    Ferreira, Murilo Oliveira Alves; Morgado, Victor Auricchio Fernandes; Santos, Kaue Ribeiro dos; Gelamo, Rogerio Valentim ; Mariani, Fábio Edson ; Slade, Natália Bueno Leite; Morais, Mateus Mota ; Fortulan, Carlos Alberto ; Galo, Rodrigo ; Jasinevicius, Renato Goulart ; Pinto, Haroldo Cavalcanti ; Moreto, Jéferson Aparecido

    Source: Lubricants. Unidades: EESC, FORP

    Subjects: AÇO INOXIDÁVEL, DESGASTE DOS MATERIAIS, NIÓBIO, MATERIAIS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERREIRA, Murilo Oliveira Alves et al. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions. Lubricants, v. 12, n. 10, p. 1-16, 2024Tradução . . Disponível em: http://dx.doi.org/10.3390/lubricants12100345. Acesso em: 11 abr. 2026.

    • APA

      Ferreira, M. O. A., Morgado, V. A. F., Santos, K. R. dos, Gelamo, R. V., Mariani, F. E., Slade, N. B. L., et al. (2024). Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions. Lubricants, 12( 10), 1-16. doi:10.3390/lubricants12100345

    • NLM

      Ferreira MOA, Morgado VAF, Santos KR dos, Gelamo RV, Mariani FE, Slade NBL, Morais MM, Fortulan CA, Galo R, Jasinevicius RG, Pinto HC, Moreto JA. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions [Internet]. Lubricants. 2024 ; 12( 10): 1-16.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.3390/lubricants12100345

    • Vancouver

      Ferreira MOA, Morgado VAF, Santos KR dos, Gelamo RV, Mariani FE, Slade NBL, Morais MM, Fortulan CA, Galo R, Jasinevicius RG, Pinto HC, Moreto JA. Enhancing the wear performance of 316L stainless steel with Nb2O5 coatings deposited via DC sputtering at room temperature under varied environmental conditions [Internet]. Lubricants. 2024 ; 12( 10): 1-16.[citado 2026 abr. 11 ] Available from: http://dx.doi.org/10.3390/lubricants12100345

  • Artigo de periodico

    Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material (2023)

    Santos, Juliana Jarussi dos ; Lopes, José Humberto; Aguiar, Kelen Menezes Flores Rossi de ; Simões, Mateus Batista ; M'Peko, Jean-Claude ; Jasinevicius, Renato Goulart ; Cavalheiro, Eder Tadeu Gomes ; Imasato, Hidetake ; Rodrigues Filho, Ubirajara Pereira

    Source: Journal of CO2 Utilization. Unidades: IFSC, EESC, IQSC

    Subjects: DIÓXIDO DE CARBONO, POLÍMEROS (QUÍMICA ORGÂNICA)

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SANTOS, Juliana Jarussi dos et al. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material. Journal of CO2 Utilization, v. 67, n. Ja 2023, p. 102303-1-102303-12 + supplementary material, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.jcou.2022.102303. Acesso em: 11 abr. 2026.

    • APA

      Santos, J. J. dos, Lopes, J. H., Aguiar, K. M. F. R. de, Simões, M. B., M'Peko, J. -C., Jasinevicius, R. G., et al. (2023). Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material. Journal of CO2 Utilization, 67( Ja 2023), 102303-1-102303-12 + supplementary material. doi:10.1016/j.jcou.2022.102303

    • NLM

      Santos JJ dos, Lopes JH, Aguiar KMFR de, Simões MB, M'Peko J-C, Jasinevicius RG, Cavalheiro ETG, Imasato H, Rodrigues Filho UP. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material [Internet]. Journal of CO2 Utilization. 2023 ; 67( Ja 2023): 102303-1-102303-12 + supplementary material.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.jcou.2022.102303

    • Vancouver

      Santos JJ dos, Lopes JH, Aguiar KMFR de, Simões MB, M'Peko J-C, Jasinevicius RG, Cavalheiro ETG, Imasato H, Rodrigues Filho UP. Hybrid bisphenol A non-isocyanate polyurethane composite with mica powder: a new insulating material [Internet]. Journal of CO2 Utilization. 2023 ; 67( Ja 2023): 102303-1-102303-12 + supplementary material.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.jcou.2022.102303

  • Artigo de periodico

    Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials (2022)

    Zanoboni, Joissi Ferrari; Silva, Aryvelto Miranda; Alencar, Cristiane de Melo; Porto, Thiago Soares; Jasinevicius, Renato Goulart ; Fortulan, Carlos Alberto ; Campos, Edson Alves de

    Source: The Journal of Prosthetic Dentistry. Unidade: EESC

    Subjects: MATERIAIS CERÂMICOS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ZANOBONI, Joissi Ferrari et al. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials. The Journal of Prosthetic Dentistry, v. 127, n. 6, p. 1-8, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.prosdent.2022.03.009. Acesso em: 11 abr. 2026.

    • APA

      Zanoboni, J. F., Silva, A. M., Alencar, C. de M., Porto, T. S., Jasinevicius, R. G., Fortulan, C. A., & Campos, E. A. de. (2022). Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials. The Journal of Prosthetic Dentistry, 127( 6), 1-8. doi:10.1016/j.prosdent.2022.03.009

    • NLM

      Zanoboni JF, Silva AM, Alencar C de M, Porto TS, Jasinevicius RG, Fortulan CA, Campos EA de. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials [Internet]. The Journal of Prosthetic Dentistry. 2022 ; 127( 6): 1-8.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.prosdent.2022.03.009

    • Vancouver

      Zanoboni JF, Silva AM, Alencar C de M, Porto TS, Jasinevicius RG, Fortulan CA, Campos EA de. Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials [Internet]. The Journal of Prosthetic Dentistry. 2022 ; 127( 6): 1-8.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.prosdent.2022.03.009

  • Artigo de periodico

    Tuning the photoconductivity of Co3O4 thin films by defect engineering (2022)

    Silva, Ana Luiza Costa; Rodrigues, Ariano de Giovanni; Jasinevicius, Renato Goulart ; Godoy, Marcio Peron Franco de

    Source: Applied Surface Science. Unidade: EESC

    Subjects: FOTOCONDUTIVIDADE, FILMES FINOS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Ana Luiza Costa et al. Tuning the photoconductivity of Co3O4 thin films by defect engineering. Applied Surface Science, v. 606, p. 1-9, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.apsusc.2022.154943. Acesso em: 11 abr. 2026.

    • APA

      Silva, A. L. C., Rodrigues, A. de G., Jasinevicius, R. G., & Godoy, M. P. F. de. (2022). Tuning the photoconductivity of Co3O4 thin films by defect engineering. Applied Surface Science, 606, 1-9. doi:10.1016/j.apsusc.2022.154943

    • NLM

      Silva ALC, Rodrigues A de G, Jasinevicius RG, Godoy MPF de. Tuning the photoconductivity of Co3O4 thin films by defect engineering [Internet]. Applied Surface Science. 2022 ; 606 1-9.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.apsusc.2022.154943

    • Vancouver

      Silva ALC, Rodrigues A de G, Jasinevicius RG, Godoy MPF de. Tuning the photoconductivity of Co3O4 thin films by defect engineering [Internet]. Applied Surface Science. 2022 ; 606 1-9.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.apsusc.2022.154943

  • Trabalho de evento

    A method for deposition rate estimation on a low-cost home-built DC sputter system (2022)

    Pinto, H. M.; Jasinevicius, Renato Goulart ; Cirino, G. A.

    Conference titles: Symposium on Microelectronics Technology and Devices - SBMicro. Unidade: EESC

    Subjects: FILMES FINOS, SEMICONDUTORES, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PINTO, H. M. e JASINEVICIUS, Renato Goulart e CIRINO, G. A. A method for deposition rate estimation on a low-cost home-built DC sputter system. 2022, Anais.. Piscataway, NJ, USA: IEEE, 2022. Disponível em: https://doi.org/10.1109/SBMICRO55822.2022.9881038. Acesso em: 11 abr. 2026.

    • APA

      Pinto, H. M., Jasinevicius, R. G., & Cirino, G. A. (2022). A method for deposition rate estimation on a low-cost home-built DC sputter system. In . Piscataway, NJ, USA: IEEE. doi:10.1109/SBMICRO55822.2022.9881038

    • NLM

      Pinto HM, Jasinevicius RG, Cirino GA. A method for deposition rate estimation on a low-cost home-built DC sputter system [Internet]. 2022 ;[citado 2026 abr. 11 ] Available from: https://doi.org/10.1109/SBMICRO55822.2022.9881038

    • Vancouver

      Pinto HM, Jasinevicius RG, Cirino GA. A method for deposition rate estimation on a low-cost home-built DC sputter system [Internet]. 2022 ;[citado 2026 abr. 11 ] Available from: https://doi.org/10.1109/SBMICRO55822.2022.9881038

  • Artigo de periodico

    Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 (2021)

    Jasinevicius, Renato Goulart ; Otoboni, José Antônio; Basso, Igor Fernando; Dib, Marcel Henrique Militão

    Source: Journal of Manufacturing Processes. Unidade: EESC

    Assunto: ENGENHARIA MECÂNICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      JASINEVICIUS, Renato Goulart et al. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, v. 68, p. 136-157, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jmapro.2021.07.027. Acesso em: 11 abr. 2026.

    • APA

      Jasinevicius, R. G., Otoboni, J. A., Basso, I. F., & Dib, M. H. M. (2021). Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6. Journal of Manufacturing Processes, 68, 136-157. doi:10.1016/j.jmapro.2021.07.027

    • NLM

      Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027

    • Vancouver

      Jasinevicius RG, Otoboni JA, Basso IF, Dib MHM. Size effects in ultraprecision machining of aluminum alloys: conventional AA6061-T6 and RSA 6061-T6 [Internet]. Journal of Manufacturing Processes. 2021 ; 68 136-157.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.jmapro.2021.07.027

  • Trabalho de evento

    Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA (2021)

    Demarchi, Enrico Ferro; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: USINAGEM, MATERIAIS ÓPTICOS, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DEMARCHI, Enrico Ferro e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. 2021, Anais.. Cranfield, United Kingdom: EUSPEN, 2021. Disponível em: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf. Acesso em: 11 abr. 2026.

    • APA

      Demarchi, E. F., Dib, M. H. M., & Jasinevicius, R. G. (2021). Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

    • NLM

      Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

    • Vancouver

      Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf

  • Artigo de periodico

    On the photoconductivity behavior of emeraldine-salt polyaniline films (2021)

    Paiva, A. B. de; Correr, G. I.; Ugucioni, Julio César; Carvalho, G. R.; Jasinevicius, Renato Goulart ; Godoy, M. P. F. de

    Source: Synthetic Metals. Unidade: EESC

    Subjects: FOTOCONDUTIVIDADE, FOTOLUMINESCÊNCIA, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAIVA, A. B. de et al. On the photoconductivity behavior of emeraldine-salt polyaniline films. Synthetic Metals, v. 281, p. 1-10, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.synthmet.2021.116915. Acesso em: 11 abr. 2026.

    • APA

      Paiva, A. B. de, Correr, G. I., Ugucioni, J. C., Carvalho, G. R., Jasinevicius, R. G., & Godoy, M. P. F. de. (2021). On the photoconductivity behavior of emeraldine-salt polyaniline films. Synthetic Metals, 281, 1-10. doi:10.1016/j.synthmet.2021.116915

    • NLM

      Paiva AB de, Correr GI, Ugucioni JC, Carvalho GR, Jasinevicius RG, Godoy MPF de. On the photoconductivity behavior of emeraldine-salt polyaniline films [Internet]. Synthetic Metals. 2021 ; 281 1-10.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.synthmet.2021.116915

    • Vancouver

      Paiva AB de, Correr GI, Ugucioni JC, Carvalho GR, Jasinevicius RG, Godoy MPF de. On the photoconductivity behavior of emeraldine-salt polyaniline films [Internet]. Synthetic Metals. 2021 ; 281 1-10.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.synthmet.2021.116915

  • Artigo de periodico

    Hot embossing of aspherical Fresnel microlenses: design, process, and characterization (2021)

    Colafemina, João Paulo; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart

    Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC

    Subjects: ENGENHARIA MECÂNICA, TORNEAMENTO, POLÍMEROS (MATERIAIS)

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      COLAFEMINA, João Paulo e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, p. 1-19, 2021Tradução . . Disponível em: https://doi.org/10.1007/s00170-021-06637-y. Acesso em: 11 abr. 2026.

    • APA

      Colafemina, J. P., Dib, M. H. M., & Jasinevicius, R. G. (2021). Hot embossing of aspherical Fresnel microlenses: design, process, and characterization. International Journal of Advanced Manufacturing Technology, 1-19. doi:10.1007/s00170-021-06637-y

    • NLM

      Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1007/s00170-021-06637-y

    • Vancouver

      Colafemina JP, Dib MHM, Jasinevicius RG. Hot embossing of aspherical Fresnel microlenses: design, process, and characterization [Internet]. International Journal of Advanced Manufacturing Technology. 2021 ; 1-19.[citado 2026 abr. 11 ] Available from: https://doi.org/10.1007/s00170-021-06637-y

  • Trabalho de evento

    Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel (2019)

    Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. 2019, Anais.. Cranfield, United Kingdom: EUSPEN, 2019. Disponível em: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf. Acesso em: 11 abr. 2026.

    • APA

      Assis, C. L. F. de, & Jasinevicius, R. G. (2019). Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

    • NLM

      Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

    • Vancouver

      Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf

  • Artigo de periodico

    Micro drilling of carbon fiber reinforced polymer (2019)

    Basso, Igor; Batista, Marcelo Ferreira; Jasinevicius, Renato Goulart ; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos

    Source: Composite Structures. Unidade: EESC

    Subjects: PERFURAÇÃO, POLÍMEROS (MATERIAIS), DANO

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BASSO, Igor et al. Micro drilling of carbon fiber reinforced polymer. Composite Structures, v. No 2019, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2019.111312. Acesso em: 11 abr. 2026.

    • APA

      Basso, I., Batista, M. F., Jasinevicius, R. G., Rodrigues, A. R., & Rubio, J. C. C. (2019). Micro drilling of carbon fiber reinforced polymer. Composite Structures, No 2019. doi:10.1016/j.compstruct.2019.111312

    • NLM

      Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312

    • Vancouver

      Basso I, Batista MF, Jasinevicius RG, Rodrigues AR, Rubio JCC. Micro drilling of carbon fiber reinforced polymer [Internet]. Composite Structures. 2019 ; No 2019[citado 2026 abr. 11 ] Available from: https://doi.org/10.1016/j.compstruct.2019.111312

  • Trabalho de evento

    Relação entre oxidação do cavaco e temperatura de corte no fresamento de aços para moldes e matrizes (2019)

    Secco, Daniel de Carvalho; Rodrigues, Alessandro Roger ; Jasinevicius, Renato Goulart ; Pizani, Paulo Sérgio

    Source: Anais. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC

    Subjects: FRESAGEM, OXIDAÇÃO, CAVACOS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SECCO, Daniel de Carvalho et al. Relação entre oxidação do cavaco e temperatura de corte no fresamento de aços para moldes e matrizes. 2019, Anais.. Rio de Janeiro: ABCM, 2019. Disponível em: https://repositorio.usp.br/directbitstream/16646b98-dc93-4e53-b09c-c949452a1f21/prod_022564_sysno_3001367.pdf. Acesso em: 11 abr. 2026.

    • APA

      Secco, D. de C., Rodrigues, A. R., Jasinevicius, R. G., & Pizani, P. S. (2019). Relação entre oxidação do cavaco e temperatura de corte no fresamento de aços para moldes e matrizes. In Anais. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/16646b98-dc93-4e53-b09c-c949452a1f21/prod_022564_sysno_3001367.pdf

    • NLM

      Secco D de C, Rodrigues AR, Jasinevicius RG, Pizani PS. Relação entre oxidação do cavaco e temperatura de corte no fresamento de aços para moldes e matrizes [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/16646b98-dc93-4e53-b09c-c949452a1f21/prod_022564_sysno_3001367.pdf

    • Vancouver

      Secco D de C, Rodrigues AR, Jasinevicius RG, Pizani PS. Relação entre oxidação do cavaco e temperatura de corte no fresamento de aços para moldes e matrizes [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/16646b98-dc93-4e53-b09c-c949452a1f21/prod_022564_sysno_3001367.pdf

  • Trabalho de evento

    Integridade superficial do Poli(Metil-Metacrilato) (PMMA) em torneamento de ultraprecisão (2019)

    Basso, Igor; Dib, Marcel Henrique Militão; Otoboni, José Antônio; Rodrigues, Alessandro Roger ; Jasinevicius, Renato Goulart

    Source: Anais. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC

    Assunto: TORNEAMENTO

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BASSO, Igor et al. Integridade superficial do Poli(Metil-Metacrilato) (PMMA) em torneamento de ultraprecisão. 2019, Anais.. Rio de Janeiro: ABCM, 2019. Disponível em: https://repositorio.usp.br/directbitstream/70054005-bb9e-46cf-a87b-c957fd1b88b7/prod_022566_sysno_3001370.pdf. Acesso em: 11 abr. 2026.

    • APA

      Basso, I., Dib, M. H. M., Otoboni, J. A., Rodrigues, A. R., & Jasinevicius, R. G. (2019). Integridade superficial do Poli(Metil-Metacrilato) (PMMA) em torneamento de ultraprecisão. In Anais. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/70054005-bb9e-46cf-a87b-c957fd1b88b7/prod_022566_sysno_3001370.pdf

    • NLM

      Basso I, Dib MHM, Otoboni JA, Rodrigues AR, Jasinevicius RG. Integridade superficial do Poli(Metil-Metacrilato) (PMMA) em torneamento de ultraprecisão [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/70054005-bb9e-46cf-a87b-c957fd1b88b7/prod_022566_sysno_3001370.pdf

    • Vancouver

      Basso I, Dib MHM, Otoboni JA, Rodrigues AR, Jasinevicius RG. Integridade superficial do Poli(Metil-Metacrilato) (PMMA) em torneamento de ultraprecisão [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/70054005-bb9e-46cf-a87b-c957fd1b88b7/prod_022566_sysno_3001370.pdf

  • Trabalho de evento

    Efeitos da baixa velocidade de avanço na furação de compósitos laminados (2019)

    Basso, Igor; Batista, Marcelo Ferreira; Jasinevicius, Renato Goulart ; Rodrigues, Alessandro Roger

    Source: Anais. Conference titles: Congresso Brasileiro de Engenharia de Fabricação - COBEF. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS, USINAGEM, FURAÇÃO

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BASSO, Igor et al. Efeitos da baixa velocidade de avanço na furação de compósitos laminados. 2019, Anais.. Rio de Janeiro: ABCM, 2019. Disponível em: https://repositorio.usp.br/directbitstream/4944f230-e9c7-4da2-9c86-9c08a4628c22/prod_022565_sysno_3001368.pdf. Acesso em: 11 abr. 2026.

    • APA

      Basso, I., Batista, M. F., Jasinevicius, R. G., & Rodrigues, A. R. (2019). Efeitos da baixa velocidade de avanço na furação de compósitos laminados. In Anais. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/4944f230-e9c7-4da2-9c86-9c08a4628c22/prod_022565_sysno_3001368.pdf

    • NLM

      Basso I, Batista MF, Jasinevicius RG, Rodrigues AR. Efeitos da baixa velocidade de avanço na furação de compósitos laminados [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/4944f230-e9c7-4da2-9c86-9c08a4628c22/prod_022565_sysno_3001368.pdf

    • Vancouver

      Basso I, Batista MF, Jasinevicius RG, Rodrigues AR. Efeitos da baixa velocidade de avanço na furação de compósitos laminados [Internet]. Anais. 2019 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/4944f230-e9c7-4da2-9c86-9c08a4628c22/prod_022565_sysno_3001368.pdf

  • Trabalho de evento

    Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon (2018)

    Dib, Marcel Henrique Militão; Porto, Arthur José Vieira ; Jasinevicius, Renato Goulart

    Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC

    Subjects: CRISTALOGRAFIA, TORNEAMENTO, ENGENHARIA MECÂNICA

    PrivadoHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DIB, Marcel Henrique Militão e PORTO, Arthur José Vieira e JASINEVICIUS, Renato Goulart. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon. 2018, Anais.. Cranfield, United Kingdom: EUSPEN, 2018. Disponível em: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf. Acesso em: 11 abr. 2026.

    • APA

      Dib, M. H. M., Porto, A. J. V., & Jasinevicius, R. G. (2018). Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf

    • NLM

      Dib MHM, Porto AJV, Jasinevicius RG. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon [Internet]. Proceedings. 2018 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf

    • Vancouver

      Dib MHM, Porto AJV, Jasinevicius RG. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon [Internet]. Proceedings. 2018 ;[citado 2026 abr. 11 ] Available from: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf

1 - 20 (193 records)

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2026