ReP USP - Resultado da busca

Artigo de periodico
Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating (2023)
Pereira, Natália Fernanda Santos; Reis, Barbara Cristina Mendanha; Santos, Anderson Júnior dos ; Houmard, Manuel ; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: FILMES FINOS, REVESTIMENTOS, TRIBOLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11072-2. Acesso em: 20 ago. 2024.
APA
Pereira, N. F. S., Reis, B. C. M., Santos, A. J. dos, Houmard, M., Câmara, M. A., Rodrigues, A. R., & Rubio, J. C. C. (2023). Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-023-11072-2
NLM
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Vancouver
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Artigo de periodico
Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique (2023)
Fernandes, Lucas de Martini; Javaroni, Rafael Liberatti; Rodrigues, Matheus de Souza; Ávila, Benício Nacif; Moraes, Douglas Lyra de; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; França, Thiago Valle; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: RETIFICAÇÃO, ALUMINA, MEIO AMBIENTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Lucas de Martini et al. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11674-w. Acesso em: 20 ago. 2024.
APA
Fernandes, L. de M., Javaroni, R. L., Rodrigues, M. de S., Ávila, B. N., Moraes, D. L. de, Ribeiro, F. S. F., et al. (2023). Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, 1-14. doi:10.1007/s00170-023-11674-w
NLM
Fernandes L de M, Javaroni RL, Rodrigues M de S, Ávila BN, Moraes DL de, Ribeiro FSF, Rodrigues AR, França TV, Sanchez LE de A, Bianchi EC, Lopes JC. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-14.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-023-11674-w
Vancouver
Fernandes L de M, Javaroni RL, Rodrigues M de S, Ávila BN, Moraes DL de, Ribeiro FSF, Rodrigues AR, França TV, Sanchez LE de A, Bianchi EC, Lopes JC. Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-14.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-023-11674-w
Artigo de periodico
Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids (2023)
Lopes, José Claudio; Oliveira, Danilo de Jesus; Ávila, Benício Nacif; Rodrigues, Matheus de Souza; Souza, Guilherme Guerra de; Talon, Anthony Gaspar; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: GÁS CARBÔNICO, MEIO AMBIENTE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, José Claudio et al. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids. International Journal of Advanced Manufacturing Technology, v. 129, p. 5691-5708, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s00170-023-12676-4. Acesso em: 20 ago. 2024.
APA
Lopes, J. C., Oliveira, D. de J., Ávila, B. N., Rodrigues, M. de S., Souza, G. G. de, Talon, A. G., et al. (2023). Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids. International Journal of Advanced Manufacturing Technology, 129, 5691-5708. doi:10.1007/s00170-023-12676-4
NLM
Lopes JC, Oliveira D de J, Ávila BN, Rodrigues M de S, Souza GG de, Talon AG, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129 5691-5708.[citado 2024 ago. 20 ] Available from: http://dx.doi.org/10.1007/s00170-023-12676-4
Vancouver
Lopes JC, Oliveira D de J, Ávila BN, Rodrigues M de S, Souza GG de, Talon AG, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC. Reducing carbon footprint in grinding: exploring green manufacturing to mitigate CO2 emission from cutting fuids [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 129 5691-5708.[citado 2024 ago. 20 ] Available from: http://dx.doi.org/10.1007/s00170-023-12676-4
Artigo de periodico
Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique (2022)
Talon, Anthony Gaspar; Sato, Bruno Kenta; Rodrigues, Matheus de Souza; Ávila, Benício Nacif; Cuesta, Jorge Luiz; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MOAGEM, PROCESSOS DE FABRICAÇÃO, CERÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, v. 123, p. 2771-2782, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00170-022-10385-y. Acesso em: 20 ago. 2024.
APA
Talon, A. G., Sato, B. K., Rodrigues, M. de S., Ávila, B. N., Cuesta, J. L., Ribeiro, F. S. F., et al. (2022). Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique. International Journal of Advanced Manufacturing Technology, 123, 2771-2782. doi:10.1007/s00170-022-10385-y
NLM
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-022-10385-y
Vancouver
Talon AG, Sato BK, Rodrigues M de S, Ávila BN, Cuesta JL, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Green manufacturing concept applied to the grinding process of advanced ceramics using an alternative lubri-refrigeration technique [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 123 2771-2782.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-022-10385-y
Artigo de periodico
Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process (2022)
Domingues, Bruno Biondo; Rodriguez, Rafael Lemes; Souza, Guilherme Guerra de; Ávila, Benício Nacif; Rodrigues, Matheus de Souza; Ribeiro, Fernando Sabino Fonteque; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Bianchi, Eduardo Carlos; Lopes, José Claudio
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: RETIFICAÇÃO, ENGENHARIA MECÂNICA, CERÂMICA AVANÇADA, MEIO AMBIENTE, EFEITO ESTUFA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DOMINGUES, Bruno Biondo et al. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process. International Journal of Advanced Manufacturing Technology, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1007/s00170-022-10598-1. Acesso em: 20 ago. 2024.
APA
Domingues, B. B., Rodriguez, R. L., Souza, G. G. de, Ávila, B. N., Rodrigues, M. de S., Ribeiro, F. S. F., et al. (2022). Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process. International Journal of Advanced Manufacturing Technology, 1-13. doi:10.1007/s00170-022-10598-1
NLM
Domingues BB, Rodriguez RL, Souza GG de, Ávila BN, Rodrigues M de S, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-13.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-022-10598-1
Vancouver
Domingues BB, Rodriguez RL, Souza GG de, Ávila BN, Rodrigues M de S, Ribeiro FSF, Rodrigues AR, Sanchez LE de A, Bianchi EC, Lopes JC. Eco‑friendly thinking toward mitigating the greenhouse efect applied to the alumina grinding process [Internet]. International Journal of Advanced Manufacturing Technology. 2022 ; 1-13.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-022-10598-1
Artigo de periodico
Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials (2020)
Ribeiro, Kandice Suane Barros; Venter, Giuliana Sardi; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: FRESAGEM, ACÚSTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros e VENTER, Giuliana Sardi e RODRIGUES, Alessandro Roger. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials. International Journal of Advanced Manufacturing Technology, v. 109, p. 2173-2187, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-05711-1. Acesso em: 20 ago. 2024.
APA
Ribeiro, K. S. B., Venter, G. S., & Rodrigues, A. R. (2020). Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials. International Journal of Advanced Manufacturing Technology, 109, 2173-2187. doi:10.1007/s00170-020-05711-1
NLM
Ribeiro KSB, Venter GS, Rodrigues AR. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 2173-2187.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05711-1
Vancouver
Ribeiro KSB, Venter GS, Rodrigues AR. Experimental correlation between acoustic emission and stability in micromilling of different grain-sized materials [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 109 2173-2187.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05711-1
Artigo de periodico
CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling (2020)
Kasemodel, Rodrigo Berretta; Souza, Adriano Fagali de; Voigt, Rodrigo; Basso, Igor Fernando; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: CAD/CAM, FRESAGEM, PROCESSOS DE FABRICAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KASEMODEL, Rodrigo Berretta et al. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling. International Journal of Advanced Manufacturing Technology, v. 107, p. 1883-1900, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-05143-x. Acesso em: 20 ago. 2024.
APA
Kasemodel, R. B., Souza, A. F. de, Voigt, R., Basso, I. F., & Rodrigues, A. R. (2020). CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling. International Journal of Advanced Manufacturing Technology, 107, 1883-1900. doi:10.1007/s00170-020-05143-x
NLM
Kasemodel RB, Souza AF de, Voigt R, Basso IF, Rodrigues AR. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 107 1883-1900.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05143-x
Vancouver
Kasemodel RB, Souza AF de, Voigt R, Basso IF, Rodrigues AR. CAD/CAM interfaced algorithm reduces cutting force, roughness, and machining time in free-form milling [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ; 107 1883-1900.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05143-x
Artigo de periodico
Grinding process applied to workpieces with different geometries interrupted using CBN wheel (2020)
Rodriguez, Rafael Lemes; Lopes, José Claudio; Garcia, Mateus Vinicius; Tarrento, Gilson Eduardo; Rodrigues, Alessandro Roger ; Sanchez, Luiz Eduardo de Angelo; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INTEGRIDADE ESTRUTURAL, RETIFICAÇÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUEZ, Rafael Lemes et al. Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, n. 107, p. 1265-1275, 2020Tradução . . Disponível em: https://doi.org/10.1007/s00170-020-05122-2. Acesso em: 20 ago. 2024.
APA
Rodriguez, R. L., Lopes, J. C., Garcia, M. V., Tarrento, G. E., Rodrigues, A. R., Sanchez, L. E. de A., et al. (2020). Grinding process applied to workpieces with different geometries interrupted using CBN wheel. International Journal of Advanced Manufacturing Technology, ( 107), 1265-1275. doi:10.1007/s00170-020-05122-2
NLM
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05122-2
Vancouver
Rodriguez RL, Lopes JC, Garcia MV, Tarrento GE, Rodrigues AR, Sanchez LE de A, Mello HJ de, Aguiar PR, Bianchi EC. Grinding process applied to workpieces with different geometries interrupted using CBN wheel [Internet]. International Journal of Advanced Manufacturing Technology. 2020 ;( 107): 1265-1275.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-020-05122-2
Artigo de periodico
Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill (2019)
Pereira, Natália Fernanda Santos; Rubio, Juan Carlos Campos; Santos, Anderson Júnior dos; Moumard, Manuel; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: PERFURAÇÃO, PROCESSO SOL-GEL, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill. International Journal of Advanced Manufacturing Technology, v. No 2019, p. 1-13, 2019Tradução . . Disponível em: https://doi.org/10.1007/s00170-019-04429-z. Acesso em: 20 ago. 2024.
APA
Pereira, N. F. S., Rubio, J. C. C., Santos, A. J. dos, Moumard, M., Câmara, M. A., & Rodrigues, A. R. (2019). Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill. International Journal of Advanced Manufacturing Technology, No 2019, 1-13. doi:10.1007/s00170-019-04429-z
NLM
Pereira NFS, Rubio JCC, Santos AJ dos, Moumard M, Câmara MA, Rodrigues AR. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; No 2019 1-13.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04429-z
Vancouver
Pereira NFS, Rubio JCC, Santos AJ dos, Moumard M, Câmara MA, Rodrigues AR. Drilling of nodular cast iron with a novel SiO2 coating deposited by sol-gel process in HSS drill [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; No 2019 1-13.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04429-z
Artigo de periodico
Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors (2019)
Talon, Anthony Gaspar; Lopes, José Claudio; Tavares, André Bueno; Sato, Bruno Kenta; Rodrigues, Alessandro Roger ; Genovez, Mário Celso; Pinto, Tiago Alexandre Dinis; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: INIBIDORES DE CORROSÃO, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TALON, Anthony Gaspar et al. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, n. ju 2019, p. 1437-1448, 2019Tradução . . Disponível em: https://doi.org/10.1007/s00170-019-04005-5. Acesso em: 20 ago. 2024.
APA
Talon, A. G., Lopes, J. C., Tavares, A. B., Sato, B. K., Rodrigues, A. R., Genovez, M. C., et al. (2019). Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors. International Journal of Advanced Manufacturing Technology, ( ju 2019), 1437-1448. doi:10.1007/s00170-019-04005-5
NLM
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Mello HJ de, Aguiar PR, Bianchi EC. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04005-5
Vancouver
Talon AG, Lopes JC, Tavares AB, Sato BK, Rodrigues AR, Genovez MC, Pinto TAD, Mello HJ de, Aguiar PR, Bianchi EC. Effect of hardened steel grinding using aluminum oxide wheel under application of cutting fluid with corrosion inhibitors [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ;( ju 2019): 1437-1448.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04005-5
Artigo de periodico
Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning (2019)
Lopes, José Claudio; Fragoso, Kamira Miksa; Garcia, Mateus Vinicius; Ribeiro, Fernando Sabino Fonteque; Francelin, Alan Polato; Sanchez, Luiz Eduardo de Angelo; Rodrigues, Alessandro Roger ; Mello, Hamilton José de; Aguiar, Paulo Roberto; Bianchi, Eduardo Carlos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: MOAGEM, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, José Claudio et al. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning. International Journal of Advanced Manufacturing Technology, v. no 2019, n. 105, p. 4373-4387, 2019Tradução . . Disponível em: https://doi.org/10.1007/s00170-019-04571-8. Acesso em: 20 ago. 2024.
APA
Lopes, J. C., Fragoso, K. M., Garcia, M. V., Ribeiro, F. S. F., Francelin, A. P., Sanchez, L. E. de A., et al. (2019). Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning. International Journal of Advanced Manufacturing Technology, no 2019( 105), 4373-4387. doi:10.1007/s00170-019-04571-8
NLM
Lopes JC, Fragoso KM, Garcia MV, Ribeiro FSF, Francelin AP, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR, Bianchi EC. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; no 2019( 105): 4373-4387.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04571-8
Vancouver
Lopes JC, Fragoso KM, Garcia MV, Ribeiro FSF, Francelin AP, Sanchez LE de A, Rodrigues AR, Mello HJ de, Aguiar PR, Bianchi EC. Behavior of hardened steel grinding using MQL under cold air and MQL CBN wheel cleaning [Internet]. International Journal of Advanced Manufacturing Technology. 2019 ; no 2019( 105): 4373-4387.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-019-04571-8
Artigo de periodico
Micro end-milling of channels using ultrafine-grained low-carbon steel (2015)
Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart; Rodrigues, Alessandro Roger
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: USINAGEM, AÇO BAIXO CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart e RODRIGUES, Alessandro Roger. Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, v. 77, n. 5, p. 1155-1165, 2015Tradução . . Disponível em: https://doi.org/10.1007/s00170-014-6503-2. Acesso em: 20 ago. 2024.
APA
Assis, C. L. F. de, Jasinevicius, R. G., & Rodrigues, A. R. (2015). Micro end-milling of channels using ultrafine-grained low-carbon steel. International Journal of Advanced Manufacturing Technology, 77( 5), 1155-1165. doi:10.1007/s00170-014-6503-2
NLM
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-014-6503-2
Vancouver
Assis CLF de, Jasinevicius RG, Rodrigues AR. Micro end-milling of channels using ultrafine-grained low-carbon steel [Internet]. International Journal of Advanced Manufacturing Technology. 2015 ; 77( 5): 1155-1165.[citado 2024 ago. 20 ] Available from: https://doi.org/10.1007/s00170-014-6503-2

USP Schools

ReP

Filtros

Authors

Subjects

Non normalized affiliation