ReP USP - Resultado da busca

Artigo de periodico
Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve (2021)
Kolawole, Funsho Olaitan ; Kolawole, Shola Kolade ; Varela, Luis Bernardo ; Kraszczuk, André ; Ramírez, Marco Antonio; Tschiptschin, André Paulo
Source: Tribology in Industry. Unidade: EP
Subjects: DESGASTE, REVESTIMENTO DE SUPERFÍCIES, ELASTICIDADE DAS ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KOLAWOLE, Funsho Olaitan et al. Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve. Tribology in Industry, v. 43, n. 2, p. 189-199, 2021Tradução . . Disponível em: https://doi.org/10.24874/ti.927.07.20.11. Acesso em: 03 nov. 2024.
APA
Kolawole, F. O., Kolawole, S. K., Varela, L. B., Kraszczuk, A., Ramírez, M. A., & Tschiptschin, A. P. (2021). Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve. Tribology in Industry, 43( 2), 189-199. doi:10.24874/ti.927.07.20.11
NLM
Kolawole FO, Kolawole SK, Varela LB, Kraszczuk A, Ramírez MA, Tschiptschin AP. Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve [Internet]. Tribology in Industry. 2021 ; 43( 2): 189-199.[citado 2024 nov. 03 ] Available from: https://doi.org/10.24874/ti.927.07.20.11
Vancouver
Kolawole FO, Kolawole SK, Varela LB, Kraszczuk A, Ramírez MA, Tschiptschin AP. Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve [Internet]. Tribology in Industry. 2021 ; 43( 2): 189-199.[citado 2024 nov. 03 ] Available from: https://doi.org/10.24874/ti.927.07.20.11
Artigo de periodico
Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering (2020)
Avila, Pedro Renato Tavares ; Rodrigues, Alisson Mendes ; Guimaraes, Mônica Costa Rodrigues ; Walczak, Magdalena; Menezes, Romualdo Rodrigues; Neves, Gelmires de Araújo ; Pinto, Haroldo Cavalcanti
Source: Materials. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AVILA, Pedro Renato Tavares et al. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering. Materials, v. 13, n. 16, 2020Tradução . . Disponível em: https://doi.org/10.3390/ma13163650. Acesso em: 03 nov. 2024.
APA
Avila, P. R. T., Rodrigues, A. M., Guimaraes, M. C. R., Walczak, M., Menezes, R. R., Neves, G. de A., & Pinto, H. C. (2020). Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering. Materials, 13( 16). doi:10.3390/ma13163650
NLM
Avila PRT, Rodrigues AM, Guimaraes MCR, Walczak M, Menezes RR, Neves G de A, Pinto HC. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering [Internet]. Materials. 2020 ; 13( 16):[citado 2024 nov. 03 ] Available from: https://doi.org/10.3390/ma13163650
Vancouver
Avila PRT, Rodrigues AM, Guimaraes MCR, Walczak M, Menezes RR, Neves G de A, Pinto HC. Nitrogen-enriched Cr1−xAlxN multilayer-like coatings manufactured by dynamic glancing angle direct current magnetron sputtering [Internet]. Materials. 2020 ; 13( 16):[citado 2024 nov. 03 ] Available from: https://doi.org/10.3390/ma13163650
Parte de monografia/livro
Diamond-Like Carbon (DLC) Coatings for Automobile Applications (2020)
Kolawole, Funsho Olaitan ; Kolawole, Shola Kolade ; Varela Jiménez, Luis Bernardo ; Owa, Adebayo Felix; Ramirez, Marco Antonio; Tschiptschin, André Paulo
Source: Engineering Applications of Diamond. Unidade: EP
Subjects: AUTOMÓVEIS, TRIBOLOGIA, CARBONO, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KOLAWOLE, Funsho Olaitan et al. Diamond-Like Carbon (DLC) Coatings for Automobile Applications. Engineering Applications of Diamond. Tradução . London: IntechOpen, 2020. . Disponível em: https://doi.org/10.5772/intechopen.95063. Acesso em: 03 nov. 2024.
APA
Kolawole, F. O., Kolawole, S. K., Varela Jiménez, L. B., Owa, A. F., Ramirez, M. A., & Tschiptschin, A. P. (2020). Diamond-Like Carbon (DLC) Coatings for Automobile Applications. In Engineering Applications of Diamond. London: IntechOpen. doi:10.5772/intechopen.95063
NLM
Kolawole FO, Kolawole SK, Varela Jiménez LB, Owa AF, Ramirez MA, Tschiptschin AP. Diamond-Like Carbon (DLC) Coatings for Automobile Applications [Internet]. In: Engineering Applications of Diamond. London: IntechOpen; 2020. [citado 2024 nov. 03 ] Available from: https://doi.org/10.5772/intechopen.95063
Vancouver
Kolawole FO, Kolawole SK, Varela Jiménez LB, Owa AF, Ramirez MA, Tschiptschin AP. Diamond-Like Carbon (DLC) Coatings for Automobile Applications [Internet]. In: Engineering Applications of Diamond. London: IntechOpen; 2020. [citado 2024 nov. 03 ] Available from: https://doi.org/10.5772/intechopen.95063
Parte de monografia/livro
Thermal spray technologies: an overview (2013)
Lombardi Neto, Amadeu; Casteletti, Luiz Carlos; Totten, George Edward
Source: Encyclopedia of tribology. Unidade: EESC
Assunto: REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOMBARDI NETO, Amadeu e CASTELETTI, Luiz Carlos e TOTTEN, George Edward. Thermal spray technologies: an overview. Encyclopedia of tribology. Tradução . New York: Springer, 2013. . Disponível em: https://doi.org/10.1007/978-0-387-92897-5_684. Acesso em: 03 nov. 2024.
APA
Lombardi Neto, A., Casteletti, L. C., & Totten, G. E. (2013). Thermal spray technologies: an overview. In Encyclopedia of tribology. New York: Springer. doi:10.1007/978-0-387-92897-5_684
NLM
Lombardi Neto A, Casteletti LC, Totten GE. Thermal spray technologies: an overview [Internet]. In: Encyclopedia of tribology. New York: Springer; 2013. [citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/978-0-387-92897-5_684
Vancouver
Lombardi Neto A, Casteletti LC, Totten GE. Thermal spray technologies: an overview [Internet]. In: Encyclopedia of tribology. New York: Springer; 2013. [citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/978-0-387-92897-5_684
Artigo de periodico
Copper as an antimicrobial agent in healthcare: an integrative literature review (2012)
Leite, Gleice Cristina; Padoveze, Maria Clara
Source: Journal of Infection Control. Unidade: EE
Subjects: COBRE, REVESTIMENTO DE SUPERFÍCIES, AGENTES ANTIMICROBIANOS, INFECÇÃO HOSPITALAR, ASSISTÊNCIA À SAÚDE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEITE, Gleice Cristina e PADOVEZE, Maria Clara. Copper as an antimicrobial agent in healthcare: an integrative literature review. Journal of Infection Control, v. 1, n. 2, p. 33-36, 2012Tradução . . Disponível em: http://jic.abih.net.br/index.php/jic/article/view/16/pdf. Acesso em: 03 nov. 2024.
APA
Leite, G. C., & Padoveze, M. C. (2012). Copper as an antimicrobial agent in healthcare: an integrative literature review. Journal of Infection Control, 1( 2), 33-36. Recuperado de http://jic.abih.net.br/index.php/jic/article/view/16/pdf
NLM
Leite GC, Padoveze MC. Copper as an antimicrobial agent in healthcare: an integrative literature review [Internet]. Journal of Infection Control. 2012 ; 1( 2): 33-36.[citado 2024 nov. 03 ] Available from: http://jic.abih.net.br/index.php/jic/article/view/16/pdf
Vancouver
Leite GC, Padoveze MC. Copper as an antimicrobial agent in healthcare: an integrative literature review [Internet]. Journal of Infection Control. 2012 ; 1( 2): 33-36.[citado 2024 nov. 03 ] Available from: http://jic.abih.net.br/index.php/jic/article/view/16/pdf
Artigo de periodico
The influence of chromate quenching and chloride contamination level on the performance of the painted hot-dipped galvanized steel (duplex system) (2011)
Bragagnolo, Gislaine Maria; Panossian, Zehbour ; Almeida, Neusvaldo Lira de ; Almeida, Marcio Bispo de; Ferrari, Jean Vicente ; Andreoli, Mario Carlos; Fragata, Fernando de Loureiro
Source: Journal of Coatings Technology and Research. Unidade: EP
Subjects: CORROSÃO, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRAGAGNOLO, Gislaine Maria et al. The influence of chromate quenching and chloride contamination level on the performance of the painted hot-dipped galvanized steel (duplex system). Journal of Coatings Technology and Research, v. 8, n. 5, p. 629-638, 2011Tradução . . Disponível em: https://doi.org/10.1007/s11998-011-9349-7. Acesso em: 03 nov. 2024.
APA
Bragagnolo, G. M., Panossian, Z., Almeida, N. L. de, Almeida, M. B. de, Ferrari, J. V., Andreoli, M. C., & Fragata, F. de L. (2011). The influence of chromate quenching and chloride contamination level on the performance of the painted hot-dipped galvanized steel (duplex system). Journal of Coatings Technology and Research, 8( 5), 629-638. doi:10.1007/s11998-011-9349-7
NLM
Bragagnolo GM, Panossian Z, Almeida NL de, Almeida MB de, Ferrari JV, Andreoli MC, Fragata F de L. The influence of chromate quenching and chloride contamination level on the performance of the painted hot-dipped galvanized steel (duplex system) [Internet]. Journal of Coatings Technology and Research. 2011 ;8( 5): 629-638.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s11998-011-9349-7
Vancouver
Bragagnolo GM, Panossian Z, Almeida NL de, Almeida MB de, Ferrari JV, Andreoli MC, Fragata F de L. The influence of chromate quenching and chloride contamination level on the performance of the painted hot-dipped galvanized steel (duplex system) [Internet]. Journal of Coatings Technology and Research. 2011 ;8( 5): 629-638.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1007/s11998-011-9349-7
Artigo de periodico
Effect of binders and surface finish on wear resistance of HVOF coatings (2010)
Casteletti, Luiz Carlos; Arnoni, Eduardo Augusto Brefere; Lombardi Neto, Amadeu; Fernandes, Frederico Augusto Pires; Totten, George Edward
Source: Surface Engineering. Unidade: EESC
Subjects: MICROSCOPIA ELETRÔNICA, MICROSCÓPIO ÓTICO, ABRASÃO, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Effect of binders and surface finish on wear resistance of HVOF coatings. Surface Engineering, v. 26, n. 6, p. 440-446, 2010Tradução . . Disponível em: https://doi.org/10.1179/026708410X12593178265706. Acesso em: 03 nov. 2024.
APA
Casteletti, L. C., Arnoni, E. A. B., Lombardi Neto, A., Fernandes, F. A. P., & Totten, G. E. (2010). Effect of binders and surface finish on wear resistance of HVOF coatings. Surface Engineering, 26( 6), 440-446. doi:10.1179/026708410X12593178265706
NLM
Casteletti LC, Arnoni EAB, Lombardi Neto A, Fernandes FAP, Totten GE. Effect of binders and surface finish on wear resistance of HVOF coatings [Internet]. Surface Engineering. 2010 ; 26( 6): 440-446.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1179/026708410X12593178265706
Vancouver
Casteletti LC, Arnoni EAB, Lombardi Neto A, Fernandes FAP, Totten GE. Effect of binders and surface finish on wear resistance of HVOF coatings [Internet]. Surface Engineering. 2010 ; 26( 6): 440-446.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1179/026708410X12593178265706
Trabalho de evento
Structural analysis of hot-mix asphalt samples containing ashes of pinus wood skin burned for the production of Medium Density Fiberboard (MDF) wooden panels (2010)
Fernandes Júnior, José Leomar; Bardini, Vivian Silveira dos Santos
Source: Proceedings. Conference titles: International Conference on Asphalt Pavements - ISAP. Unidade: EESC
Subjects: PAVIMENTAÇÃO ASFÁLTICA, RESÍDUOS SÓLIDOS, REVESTIMENTO DE SUPERFÍCIES, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES JÚNIOR, José Leomar e BARDINI, Vivian Silveira dos Santos. Structural analysis of hot-mix asphalt samples containing ashes of pinus wood skin burned for the production of Medium Density Fiberboard (MDF) wooden panels. 2010, Anais.. Nagoya: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2010. Disponível em: https://repositorio.usp.br/directbitstream/a1bfe0a2-4de4-4d7b-8f46-5d36d1bf9ae4/sysno3165642%5BArt%20per%5D%20Fernandes%20Jr_Structural%20%20Analysis%20%20of%20%20Hot-Mix%20%20Asphalt%20%20Samples%20%20Containing%20%20Ashes%20%20of%20Pinus.pdf. Acesso em: 03 nov. 2024.
APA
Fernandes Júnior, J. L., & Bardini, V. S. dos S. (2010). Structural analysis of hot-mix asphalt samples containing ashes of pinus wood skin burned for the production of Medium Density Fiberboard (MDF) wooden panels. In Proceedings. Nagoya: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/a1bfe0a2-4de4-4d7b-8f46-5d36d1bf9ae4/sysno3165642%5BArt%20per%5D%20Fernandes%20Jr_Structural%20%20Analysis%20%20of%20%20Hot-Mix%20%20Asphalt%20%20Samples%20%20Containing%20%20Ashes%20%20of%20Pinus.pdf
NLM
Fernandes Júnior JL, Bardini VS dos S. Structural analysis of hot-mix asphalt samples containing ashes of pinus wood skin burned for the production of Medium Density Fiberboard (MDF) wooden panels [Internet]. Proceedings. 2010 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/a1bfe0a2-4de4-4d7b-8f46-5d36d1bf9ae4/sysno3165642%5BArt%20per%5D%20Fernandes%20Jr_Structural%20%20Analysis%20%20of%20%20Hot-Mix%20%20Asphalt%20%20Samples%20%20Containing%20%20Ashes%20%20of%20Pinus.pdf
Vancouver
Fernandes Júnior JL, Bardini VS dos S. Structural analysis of hot-mix asphalt samples containing ashes of pinus wood skin burned for the production of Medium Density Fiberboard (MDF) wooden panels [Internet]. Proceedings. 2010 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/a1bfe0a2-4de4-4d7b-8f46-5d36d1bf9ae4/sysno3165642%5BArt%20per%5D%20Fernandes%20Jr_Structural%20%20Analysis%20%20of%20%20Hot-Mix%20%20Asphalt%20%20Samples%20%20Containing%20%20Ashes%20%20of%20Pinus.pdf
Trabalho de evento
Wear evaluation of an AISI 1020 steel coated with PEEK (2010)
Pereira, Ricardo Gomes; Fernandes, Frederico Augusto Pires; Sirbone, Fabio Renato Camargo; Santos Neto, Antídio de Oliveira; Casteletti, Luiz Carlos
Source: Proceedings. Conference titles: IFHTSE Congress - International Federation for Heat Treatment and Surface Engineering. Unidade: EESC
Subjects: DESGASTE, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Ricardo Gomes et al. Wear evaluation of an AISI 1020 steel coated with PEEK. 2010, Anais.. São Paulo: ABM, 2010. . Acesso em: 03 nov. 2024.
APA
Pereira, R. G., Fernandes, F. A. P., Sirbone, F. R. C., Santos Neto, A. de O., & Casteletti, L. C. (2010). Wear evaluation of an AISI 1020 steel coated with PEEK. In Proceedings. São Paulo: ABM.
NLM
Pereira RG, Fernandes FAP, Sirbone FRC, Santos Neto A de O, Casteletti LC. Wear evaluation of an AISI 1020 steel coated with PEEK. Proceedings. 2010 ;[citado 2024 nov. 03 ]
Vancouver
Pereira RG, Fernandes FAP, Sirbone FRC, Santos Neto A de O, Casteletti LC. Wear evaluation of an AISI 1020 steel coated with PEEK. Proceedings. 2010 ;[citado 2024 nov. 03 ]
Trabalho de evento-resumo
Sol-gel derived hybrid coatings based on amine-cured epoxy for protection against corrosion of Al alloy 2024-T3 (2008)
Martins, Cristiane Reis ; Ferrari, Jean Vicente ; Melo, Hercílio Gomes de ; Aoki, Idalina Vieira
Source: ISE : cd of abstracts. Conference titles: Annual Meeting of the International Society of Eletrochemistry. Unidade: EP
Subjects: ALUMÍNIO, CORROSÃO DOS MATERIAIS (PREVENÇÃO E CONTROLE), ELETROQUÍMICA (TÉCNICAS), MÉTODO DE IMPEDÂNCIA, PROTEÇÃO DOS MATERIAIS, REVESTIMENTO DE SUPERFÍCIES, TRATAMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Cristiane Reis et al. Sol-gel derived hybrid coatings based on amine-cured epoxy for protection against corrosion of Al alloy 2024-T3. 2008, Anais.. Seville: ISE, 2008. . Acesso em: 03 nov. 2024.
APA
Martins, C. R., Ferrari, J. V., Melo, H. G. de, & Aoki, I. V. (2008). Sol-gel derived hybrid coatings based on amine-cured epoxy for protection against corrosion of Al alloy 2024-T3. In ISE : cd of abstracts. Seville: ISE.
NLM
Martins CR, Ferrari JV, Melo HG de, Aoki IV. Sol-gel derived hybrid coatings based on amine-cured epoxy for protection against corrosion of Al alloy 2024-T3. ISE : cd of abstracts. 2008 ;[citado 2024 nov. 03 ]
Vancouver
Martins CR, Ferrari JV, Melo HG de, Aoki IV. Sol-gel derived hybrid coatings based on amine-cured epoxy for protection against corrosion of Al alloy 2024-T3. ISE : cd of abstracts. 2008 ;[citado 2024 nov. 03 ]
Artigo de periodico
Tool wear aspects when applying high-speed tapping on grey cast iron (2008)
Bezerra, Alexandre Araújo; Coelho, Reginaldo Teixeira
Source: Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture. Unidade: EESC
Subjects: CORTE, REVESTIMENTO DE SUPERFÍCIES, DESGASTE, FERRO FUNDIDO CINZENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BEZERRA, Alexandre Araújo e COELHO, Reginaldo Teixeira. Tool wear aspects when applying high-speed tapping on grey cast iron. Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, v. 222, n. 2, p. 129-136, 2008Tradução . . Disponível em: https://doi.org/10.1243/09544054JEM914. Acesso em: 03 nov. 2024.
APA
Bezerra, A. A., & Coelho, R. T. (2008). Tool wear aspects when applying high-speed tapping on grey cast iron. Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, 222( 2), 129-136. doi:10.1243/09544054JEM914
NLM
Bezerra AA, Coelho RT. Tool wear aspects when applying high-speed tapping on grey cast iron [Internet]. Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture. 2008 ; 222( 2): 129-136.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1243/09544054JEM914
Vancouver
Bezerra AA, Coelho RT. Tool wear aspects when applying high-speed tapping on grey cast iron [Internet]. Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture. 2008 ; 222( 2): 129-136.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1243/09544054JEM914
Trabalho de evento-resumo
Characterization and corrosion resistance of siloxane-PMMA hybrid coatings prepared by sol gel on tinplated steel (2008)
Sarmento, Victor Hugo Vitorino ; Suegama, Patricia Hatsue ; Diniz, Roseane Nunes; Aoki, Idalina Vieira ; Santilli, Celso Valentim
Source: ISE : cd of abstracts. Conference titles: Annual Meeting of the International Society of Eletrochemistry. Unidade: EP
Subjects: AÇO, CORROSÃO DOS MATERIAIS (PREVENÇÃO E CONTROLE), ELETROQUÍMICA (TÉCNICAS), MATERIAIS ISOLANTES, MÉTODO DE IMPEDÂNCIA, PROTEÇÃO DOS MATERIAIS, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SARMENTO, Victor Hugo Vitorino et al. Characterization and corrosion resistance of siloxane-PMMA hybrid coatings prepared by sol gel on tinplated steel. 2008, Anais.. Seville: ISE, 2008. . Acesso em: 03 nov. 2024.
APA
Sarmento, V. H. V., Suegama, P. H., Diniz, R. N., Aoki, I. V., & Santilli, C. V. (2008). Characterization and corrosion resistance of siloxane-PMMA hybrid coatings prepared by sol gel on tinplated steel. In ISE : cd of abstracts. Seville: ISE.
NLM
Sarmento VHV, Suegama PH, Diniz RN, Aoki IV, Santilli CV. Characterization and corrosion resistance of siloxane-PMMA hybrid coatings prepared by sol gel on tinplated steel. ISE : cd of abstracts. 2008 ;[citado 2024 nov. 03 ]
Vancouver
Sarmento VHV, Suegama PH, Diniz RN, Aoki IV, Santilli CV. Characterization and corrosion resistance of siloxane-PMMA hybrid coatings prepared by sol gel on tinplated steel. ISE : cd of abstracts. 2008 ;[citado 2024 nov. 03 ]
Trabalho de evento
Thermal spray coatings on an aged 7475 aluminum alloy substrate (2007)
Macedo, Diogo Teixeira de; Cruvinel, Lucas de Brito; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Source: Proceedings. Conference titles: ASM Heat Treating Society Conference and Exposition. Unidade: EESC
Subjects: REVESTIMENTO DE SUPERFÍCIES, DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Diogo Teixeira de et al. Thermal spray coatings on an aged 7475 aluminum alloy substrate. 2007, Anais.. Detroit: ASM International, 2007. . Acesso em: 03 nov. 2024.
APA
Macedo, D. T. de, Cruvinel, L. de B., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2007). Thermal spray coatings on an aged 7475 aluminum alloy substrate. In Proceedings. Detroit: ASM International.
NLM
Macedo DT de, Cruvinel L de B, Lombardi Neto A, Totten GE, Casteletti LC. Thermal spray coatings on an aged 7475 aluminum alloy substrate. Proceedings. 2007 ;[citado 2024 nov. 03 ]
Vancouver
Macedo DT de, Cruvinel L de B, Lombardi Neto A, Totten GE, Casteletti LC. Thermal spray coatings on an aged 7475 aluminum alloy substrate. Proceedings. 2007 ;[citado 2024 nov. 03 ]
Artigo de periodico
Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions (2007)
Coelho, Reginaldo Teixeira; Ng, Eu-Gene; Elbestawi, M. A.; Coelho, Reginaldo Teixeira
Source: International Journal of Machine Tools and Manufacture. Unidade: EESC
Subjects: AÇO DE ALTA RESISTÊNCIA, REVESTIMENTO DE SUPERFÍCIES, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira et al. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions. International Journal of Machine Tools and Manufacture, v. 47, n. 2, p. 263-272, 2007Tradução . . Disponível em: https://doi.org/10.1016/j.ijmachtools.2006.03.020. Acesso em: 03 nov. 2024.
APA
Coelho, R. T., Ng, E. -G., Elbestawi, M. A., & Coelho, R. T. (2007). Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions. International Journal of Machine Tools and Manufacture, 47( 2), 263-272. doi:10.1016/j.ijmachtools.2006.03.020
NLM
Coelho RT, Ng E-G, Elbestawi MA, Coelho RT. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions [Internet]. International Journal of Machine Tools and Manufacture. 2007 ; 47( 2): 263-272.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.ijmachtools.2006.03.020
Vancouver
Coelho RT, Ng E-G, Elbestawi MA, Coelho RT. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions [Internet]. International Journal of Machine Tools and Manufacture. 2007 ; 47( 2): 263-272.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.ijmachtools.2006.03.020
Trabalho de evento
Analysis of different surface preparation procedures for deposition of polycrystalline diamond coatings on cemented carbides (2007)
Lopes, Lutero Harzer; Martins, Deilton Reis; Verdonck, Patrick Bernard; Salvadori, Maria Cecília Barbosa da Silveira; Batalha, Gilmar Ferreira
Source: COBEF. Conference titles: Congresso Brasileiro de Engenharia de Fabricação. Unidades: IF, EP
Subjects: REVESTIMENTO DE SUPERFÍCIES, DIAMANTE, METAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LOPES, Lutero Harzer et al. Analysis of different surface preparation procedures for deposition of polycrystalline diamond coatings on cemented carbides. 2007, Anais.. Águas de São Pedro: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/02b01bf1-f05b-47a2-8500-37ecfd597f1e/Batalha-2007-Analysis%20of%20different%20surface%20preparation%20ok.pdf. Acesso em: 03 nov. 2024.
APA
Lopes, L. H., Martins, D. R., Verdonck, P. B., Salvadori, M. C. B. da S., & Batalha, G. F. (2007). Analysis of different surface preparation procedures for deposition of polycrystalline diamond coatings on cemented carbides. In COBEF. Águas de São Pedro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/02b01bf1-f05b-47a2-8500-37ecfd597f1e/Batalha-2007-Analysis%20of%20different%20surface%20preparation%20ok.pdf
NLM
Lopes LH, Martins DR, Verdonck PB, Salvadori MCB da S, Batalha GF. Analysis of different surface preparation procedures for deposition of polycrystalline diamond coatings on cemented carbides [Internet]. COBEF. 2007 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/02b01bf1-f05b-47a2-8500-37ecfd597f1e/Batalha-2007-Analysis%20of%20different%20surface%20preparation%20ok.pdf
Vancouver
Lopes LH, Martins DR, Verdonck PB, Salvadori MCB da S, Batalha GF. Analysis of different surface preparation procedures for deposition of polycrystalline diamond coatings on cemented carbides [Internet]. COBEF. 2007 ;[citado 2024 nov. 03 ] Available from: https://repositorio.usp.br/directbitstream/02b01bf1-f05b-47a2-8500-37ecfd597f1e/Batalha-2007-Analysis%20of%20different%20surface%20preparation%20ok.pdf
Artigo de periodico
Influence of HVOF process using 'CR IND.3'C IND.2'-'NI'CR' and WC-'CO'CR' powders (2007)
Nucci, Rafael; Lombardi Neto, Amadeu; Arnoni, Eduardo Augusto Brefere; Totten, George Edward; Casteletti, Luiz Carlos
Source: Rechuli - Heat Treatment. Unidade: EESC
Subjects: DESGASTE DOS MATERIAIS, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NUCCI, Rafael et al. Influence of HVOF process using 'CR IND.3'C IND.2'-'NI'CR' and WC-'CO'CR' powders. Rechuli - Heat Treatment, v. 22, n. 4, p. 10-15, 2007Tradução . . Acesso em: 03 nov. 2024.
APA
Nucci, R., Lombardi Neto, A., Arnoni, E. A. B., Totten, G. E., & Casteletti, L. C. (2007). Influence of HVOF process using 'CR IND.3'C IND.2'-'NI'CR' and WC-'CO'CR' powders. Rechuli - Heat Treatment, 22( 4), 10-15.
NLM
Nucci R, Lombardi Neto A, Arnoni EAB, Totten GE, Casteletti LC. Influence of HVOF process using 'CR IND.3'C IND.2'-'NI'CR' and WC-'CO'CR' powders. Rechuli - Heat Treatment. 2007 ; 22( 4): 10-15.[citado 2024 nov. 03 ]
Vancouver
Nucci R, Lombardi Neto A, Arnoni EAB, Totten GE, Casteletti LC. Influence of HVOF process using 'CR IND.3'C IND.2'-'NI'CR' and WC-'CO'CR' powders. Rechuli - Heat Treatment. 2007 ; 22( 4): 10-15.[citado 2024 nov. 03 ]
Artigo de periodico
Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment (2006)
Oliveira, Carlos Kleber Nascimento de; Benassi, Carlos Livio; Casteletti, Luiz Carlos
Source: Surface and Coatings Technology. Unidade: EESC
Subjects: DESGASTE ABRASIVO, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Carlos Kleber Nascimento de e BENASSI, Carlos Livio e CASTELETTI, Luiz Carlos. Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment. Surface and Coatings Technology, v. 201, n. 3-4, p. 1880-1885, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2006.03.036. Acesso em: 03 nov. 2024.
APA
Oliveira, C. K. N. de, Benassi, C. L., & Casteletti, L. C. (2006). Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment. Surface and Coatings Technology, 201( 3-4), 1880-1885. doi:10.1016/j.surfcoat.2006.03.036
NLM
Oliveira CKN de, Benassi CL, Casteletti LC. Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment [Internet]. Surface and Coatings Technology. 2006 ; 201( 3-4): 1880-1885.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2006.03.036
Vancouver
Oliveira CKN de, Benassi CL, Casteletti LC. Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment [Internet]. Surface and Coatings Technology. 2006 ; 201( 3-4): 1880-1885.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2006.03.036
Artigo de periodico
Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts (2006)
Galoppi, Gustavo de Siqueira; Stipkovic Filho, Marco; Batalha, Gilmar Ferreira
Source: Journal of Materials Processing Technology.. Unidade: EP
Subjects: MÁQUINAS-FERRAMENTA, MÁQUINAS OPERATRIZES, AÇO DE ALTA RESISTÊNCIA, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GALOPPI, Gustavo de Siqueira e STIPKOVIC FILHO, Marco e BATALHA, Gilmar Ferreira. Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts. Journal of Materials Processing Technology., v. 179, n. 1/3, p. 146-153, 2006Tradução . . Disponível em: https://doi.org/10.1016/j.jmatprotec.2006.03.067. Acesso em: 03 nov. 2024.
APA
Galoppi, G. de S., Stipkovic Filho, M., & Batalha, G. F. (2006). Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts. Journal of Materials Processing Technology., 179( 1/3), 146-153. doi:10.1016/j.jmatprotec.2006.03.067
NLM
Galoppi G de S, Stipkovic Filho M, Batalha GF. Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1/3): 146-153.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.067
Vancouver
Galoppi G de S, Stipkovic Filho M, Batalha GF. Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts [Internet]. Journal of Materials Processing Technology. 2006 ; 179( 1/3): 146-153.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.jmatprotec.2006.03.067
Artigo de periodico
Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders (2005)
Oliveira, Carlos Kleber Nascimento de; Muñoz Riofano, Rosamel Melita; Casteletti, Luiz Carlos
Source: Materials Letters. Unidade: EESC
Subjects: AÇO INOXIDÁVEL DUPLEX, DESGASTE, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Carlos Kleber Nascimento de e MUÑOZ RIOFANO, Rosamel Melita e CASTELETTI, Luiz Carlos. Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders. Materials Letters, v. 59, n. 14-15, p. 1719-1722, 2005Tradução . . Disponível em: https://doi.org/10.1016/j.matlet.2005.01.052. Acesso em: 03 nov. 2024.
APA
Oliveira, C. K. N. de, Muñoz Riofano, R. M., & Casteletti, L. C. (2005). Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders. Materials Letters, 59( 14-15), 1719-1722. doi:10.1016/j.matlet.2005.01.052
NLM
Oliveira CKN de, Muñoz Riofano RM, Casteletti LC. Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders [Internet]. Materials Letters. 2005 ; 59( 14-15): 1719-1722.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.matlet.2005.01.052
Vancouver
Oliveira CKN de, Muñoz Riofano RM, Casteletti LC. Formation of carbide layers on AISI H13 and D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders [Internet]. Materials Letters. 2005 ; 59( 14-15): 1719-1722.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1016/j.matlet.2005.01.052
Artigo de periodico
Influence of silicon content on ion nitriding of ultrahigh strength steels (2004)
Casteletti, Luiz Carlos; Munõz Riofano, Rosamel Melita; Nascente, Pedro Augusto de Paula
Source: Materials Science and Technology. Unidade: EESC
Subjects: AÇO DE ALTA RESISTÊNCIA, REVESTIMENTO DE SUPERFÍCIES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos e MUNÕZ RIOFANO, Rosamel Melita e NASCENTE, Pedro Augusto de Paula. Influence of silicon content on ion nitriding of ultrahigh strength steels. Materials Science and Technology, v. 20, n. 9, p. 1171-1178, 2004Tradução . . Disponível em: https://doi.org/10.1179/026708304225021954. Acesso em: 03 nov. 2024.
APA
Casteletti, L. C., Munõz Riofano, R. M., & Nascente, P. A. de P. (2004). Influence of silicon content on ion nitriding of ultrahigh strength steels. Materials Science and Technology, 20( 9), 1171-1178. doi:10.1179/026708304225021954
NLM
Casteletti LC, Munõz Riofano RM, Nascente PA de P. Influence of silicon content on ion nitriding of ultrahigh strength steels [Internet]. Materials Science and Technology. 2004 ; 20( 9): 1171-1178.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1179/026708304225021954
Vancouver
Casteletti LC, Munõz Riofano RM, Nascente PA de P. Influence of silicon content on ion nitriding of ultrahigh strength steels [Internet]. Materials Science and Technology. 2004 ; 20( 9): 1171-1178.[citado 2024 nov. 03 ] Available from: https://doi.org/10.1179/026708304225021954

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation