ReP USP - Resultado da busca

Artigo de periodico
Photoluminous response of biocomposites produced with charcoal (2023)
Delatorre, Fabíola Martins; Cupertino, Gabriela Fontes Mayrinck ; Pereira, Allana Katiussya Silva ; Souza, Elias Costa de; Silva, Álison Moreira da ; Ucella Filho, João Gilberto Meza ; Saloni, Daniel ; Profeti, Luciene Paula Roberto ; Profeti, Demetrius ; Dias Júnior, Ananias Francisco
Source: Polymers. Unidade: ESALQ
Subjects: BIOMASSA, BIOMATERIAIS, CARVÃO, FOTOLUMINESCÊNCIA, MATERIAIS COMPÓSITOS, RADIAÇÃO ULTRAVIOLETA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DELATORRE, Fabíola Martins et al. Photoluminous response of biocomposites produced with charcoal. Polymers, v. 15, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15183788. Acesso em: 07 set. 2024.
APA
Delatorre, F. M., Cupertino, G. F. M., Pereira, A. K. S., Souza, E. C. de, Silva, Á. M. da, Ucella Filho, J. G. M., et al. (2023). Photoluminous response of biocomposites produced with charcoal. Polymers, 15, 1-17. doi:10.3390/polym15183788
NLM
Delatorre FM, Cupertino GFM, Pereira AKS, Souza EC de, Silva ÁM da, Ucella Filho JGM, Saloni D, Profeti LPR, Profeti D, Dias Júnior AF. Photoluminous response of biocomposites produced with charcoal [Internet]. Polymers. 2023 ; 15 1-17.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15183788
Vancouver
Delatorre FM, Cupertino GFM, Pereira AKS, Souza EC de, Silva ÁM da, Ucella Filho JGM, Saloni D, Profeti LPR, Profeti D, Dias Júnior AF. Photoluminous response of biocomposites produced with charcoal [Internet]. Polymers. 2023 ; 15 1-17.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15183788
Artigo de periodico
Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model (2023)
Fernandez, Meyli Valin; Rivera, José Luis Valin; Rodriguez, Frank Pérez; Losada, Henry Figueredo; Abreu, Maria Elena Fernández; Valenzuela Díaz, Francisco Rolando ; Soto, Angel Rodriguez; Alvarez, Alexandre Alfonso; Quinteros, Roberto; Ketterer, Cristobal galleguillos; Pino, Gilberto Garcia del
Source: Applied Science. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS, BENTONITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDEZ, Meyli Valin et al. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model. Applied Science, v. 13, p. 14 , 2023Tradução . . Disponível em: https://doi.org/10.3390/app13042677. Acesso em: 07 set. 2024.
APA
Fernandez, M. V., Rivera, J. L. V., Rodriguez, F. P., Losada, H. F., Abreu, M. E. F., Valenzuela Díaz, F. R., et al. (2023). Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model. Applied Science, 13, 14 . doi:10.3390/app13042677
NLM
Fernandez MV, Rivera JLV, Rodriguez FP, Losada HF, Abreu MEF, Valenzuela Díaz FR, Soto AR, Alvarez AA, Quinteros R, Ketterer C galleguillos, Pino GG del. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model [Internet]. Applied Science. 2023 ; 13 14 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/app13042677
Vancouver
Fernandez MV, Rivera JLV, Rodriguez FP, Losada HF, Abreu MEF, Valenzuela Díaz FR, Soto AR, Alvarez AA, Quinteros R, Ketterer C galleguillos, Pino GG del. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model [Internet]. Applied Science. 2023 ; 13 14 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/app13042677
Artigo de periodico
Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers (2023)
Fernandez, Meyli Valin; Gonzáles, Maria José Ahumada; Oyanadel, Rolando Briones; Rivera, José Luis Valin; Soto, Angel Rodriguez; Ortega, Alvaro González; Ketterer, Cristobal Galleguillos; Álvarez, Alexander Alfonso; Valenzuela Díaz, Francisco Rolando ; Pino, Gilberto Garcia del
Source: Polymers. Unidade: EP
Subjects: FIBRAS VEGETAIS, BENTONITA, POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS, PROPRIEDADES DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDEZ, Meyli Valin et al. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers. Polymers, v. 15, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15061571. Acesso em: 07 set. 2024.
APA
Fernandez, M. V., Gonzáles, M. J. A., Oyanadel, R. B., Rivera, J. L. V., Soto, A. R., Ortega, A. G., et al. (2023). Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers. Polymers, 15, 1-14. doi:10.3390/polym15061571
NLM
Fernandez MV, Gonzáles MJA, Oyanadel RB, Rivera JLV, Soto AR, Ortega AG, Ketterer CG, Álvarez AA, Valenzuela Díaz FR, Pino GG del. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers [Internet]. Polymers. 2023 ; 15 1-14.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15061571
Vancouver
Fernandez MV, Gonzáles MJA, Oyanadel RB, Rivera JLV, Soto AR, Ortega AG, Ketterer CG, Álvarez AA, Valenzuela Díaz FR, Pino GG del. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers [Internet]. Polymers. 2023 ; 15 1-14.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15061571
Artigo de periodico
Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil (2023)
Kieling, Antonio Claudio ; Macedo Neto, José Costa de ; Del Pino, Gilberto Garcia ; Barboza, Ricardo da Silva ; Valenzuela Díaz, Francisco Rolando ; Rivera, Jose Luis Valin ; Fernandez, Meyli Valin ; Ketterer, Cristobal Galleguillos; Ortega, Alvaro González; Abarzúa, Roberto Iquilio
Source: Polymers. Unidade: EP
Subjects: RESINAS EPOXI, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KIELING, Antonio Claudio et al. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil. Polymers, v. 15, n. 11, p. 15 , 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15112532. Acesso em: 07 set. 2024.
APA
Kieling, A. C., Macedo Neto, J. C. de, Del Pino, G. G., Barboza, R. da S., Valenzuela Díaz, F. R., Rivera, J. L. V., et al. (2023). Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil. Polymers, 15( 11), 15 . doi:10.3390/polym15112532
NLM
Kieling AC, Macedo Neto JC de, Del Pino GG, Barboza R da S, Valenzuela Díaz FR, Rivera JLV, Fernandez MV, Ketterer CG, Ortega AG, Abarzúa RI. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil [Internet]. Polymers. 2023 ; 15( 11): 15 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15112532
Vancouver
Kieling AC, Macedo Neto JC de, Del Pino GG, Barboza R da S, Valenzuela Díaz FR, Rivera JLV, Fernandez MV, Ketterer CG, Ortega AG, Abarzúa RI. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil [Internet]. Polymers. 2023 ; 15( 11): 15 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15112532
Artigo de periodico
Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites (2023)
Rivera, Jose Luis Valin ; Reyes, Cristian Rodolfo Valenzuela; Wachtendorff, Arturo Andres Quinteros; Soto, Angel Rodriguez ; Fernandez, Meyli Valin ; Abarzúa, Roberto Iquilio; Ortega, Alvaro González ; Pino, Gilberto Garcia del ; Valenzuela Díaz, Francisco Rolando
Source: Polymers. Unidade: EP
Subjects: BENTONITA, POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS, SISAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIVERA, Jose Luis Valin et al. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites. Polymers, v. 15, n. 10, p. 17 , 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15193963. Acesso em: 07 set. 2024.
APA
Rivera, J. L. V., Reyes, C. R. V., Wachtendorff, A. A. Q., Soto, A. R., Fernandez, M. V., Abarzúa, R. I., et al. (2023). Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites. Polymers, 15( 10), 17 . doi:10.3390/polym15193963
NLM
Rivera JLV, Reyes CRV, Wachtendorff AAQ, Soto AR, Fernandez MV, Abarzúa RI, Ortega AG, Pino GG del, Valenzuela Díaz FR. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites [Internet]. Polymers. 2023 ; 15( 10): 17 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15193963
Vancouver
Rivera JLV, Reyes CRV, Wachtendorff AAQ, Soto AR, Fernandez MV, Abarzúa RI, Ortega AG, Pino GG del, Valenzuela Díaz FR. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites [Internet]. Polymers. 2023 ; 15( 10): 17 .[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/polym15193963
Artigo de periodico
Modeling the tensile behavior of fiber-reinforced strain-hardening cement-based composites: a review (2023)
Ribeiro, Paula de Oliveira; Krahl, Pablo Augusto; Carrazedo, Ricardo ; Bernardo, Luis Filipe Almeida
Source: Materials. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, CIMENTO, DEFORMAÇÃO ESTRUTURAL, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Paula de Oliveira et al. Modeling the tensile behavior of fiber-reinforced strain-hardening cement-based composites: a review. Materials, v. 16, n. 9, p. 1-26, 2023Tradução . . Disponível em: https://doi.org/10.3390/ma16093365. Acesso em: 07 set. 2024.
APA
Ribeiro, P. de O., Krahl, P. A., Carrazedo, R., & Bernardo, L. F. A. (2023). Modeling the tensile behavior of fiber-reinforced strain-hardening cement-based composites: a review. Materials, 16( 9), 1-26. doi:10.3390/ma16093365
NLM
Ribeiro P de O, Krahl PA, Carrazedo R, Bernardo LFA. Modeling the tensile behavior of fiber-reinforced strain-hardening cement-based composites: a review [Internet]. Materials. 2023 ; 16( 9): 1-26.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ma16093365
Vancouver
Ribeiro P de O, Krahl PA, Carrazedo R, Bernardo LFA. Modeling the tensile behavior of fiber-reinforced strain-hardening cement-based composites: a review [Internet]. Materials. 2023 ; 16( 9): 1-26.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ma16093365
Artigo de periodico
Nanoengineering of catalysts for enhanced hydrogen production (2022)
Fiorio, Jhonatan Luiz ; Gothe, Maitê Lippel ; Kohlrausch, Emerson Cristofer ; Zardo, Maria Luísa ; Tanaka, Auro Atsushi ; Lima, Roberto Batista de; Silva, Anderson Gabriel Marques da; Garcia, Marco Aurélio Suller ; Vidinha, Pedro ; Machado, Giovanna
Source: Hydrogen. Unidades: IQ, BIOTECNOLOGIA
Subjects: HIDROGÊNIO, NANOTECNOLOGIA, NANOPARTÍCULAS, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FIORIO, Jhonatan Luiz et al. Nanoengineering of catalysts for enhanced hydrogen production. Hydrogen, v. 3, n. 2, p. 218-254, 2022Tradução . . Disponível em: https://doi.org/10.3390/hydrogen3020014. Acesso em: 07 set. 2024.
APA
Fiorio, J. L., Gothe, M. L., Kohlrausch, E. C., Zardo, M. L., Tanaka, A. A., Lima, R. B. de, et al. (2022). Nanoengineering of catalysts for enhanced hydrogen production. Hydrogen, 3( 2), 218-254. doi:10.3390/hydrogen3020014
NLM
Fiorio JL, Gothe ML, Kohlrausch EC, Zardo ML, Tanaka AA, Lima RB de, Silva AGM da, Garcia MAS, Vidinha P, Machado G. Nanoengineering of catalysts for enhanced hydrogen production [Internet]. Hydrogen. 2022 ; 3( 2): 218-254.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/hydrogen3020014
Vancouver
Fiorio JL, Gothe ML, Kohlrausch EC, Zardo ML, Tanaka AA, Lima RB de, Silva AGM da, Garcia MAS, Vidinha P, Machado G. Nanoengineering of catalysts for enhanced hydrogen production [Internet]. Hydrogen. 2022 ; 3( 2): 218-254.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/hydrogen3020014
Artigo de periodico
Development of a 2-D array ultrasonic transducer for 3-D imaging of objects immersed in water (2021)
Rodrigues, Estevão Patricio ; Oliveira, Timoteo Francisco de; Matuda, Marcelo Yassunori ; Buiochi, Flávio
Source: Sensors. Unidade: EP
Subjects: ATUADORES PIEZELÉTRICOS, SENSOR, IMAGEM 3D, SONAR, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Estevão Patricio et al. Development of a 2-D array ultrasonic transducer for 3-D imaging of objects immersed in water. Sensors, v. 21, n. 10, p. 1-24, 2021Tradução . . Disponível em: https://doi.org/10.3390/s21103501. Acesso em: 07 set. 2024.
APA
Rodrigues, E. P., Oliveira, T. F. de, Matuda, M. Y., & Buiochi, F. (2021). Development of a 2-D array ultrasonic transducer for 3-D imaging of objects immersed in water. Sensors, 21( 10), 1-24. doi:10.3390/s21103501
NLM
Rodrigues EP, Oliveira TF de, Matuda MY, Buiochi F. Development of a 2-D array ultrasonic transducer for 3-D imaging of objects immersed in water [Internet]. Sensors. 2021 ; 21( 10): 1-24.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/s21103501
Vancouver
Rodrigues EP, Oliveira TF de, Matuda MY, Buiochi F. Development of a 2-D array ultrasonic transducer for 3-D imaging of objects immersed in water [Internet]. Sensors. 2021 ; 21( 10): 1-24.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/s21103501
Artigo de periodico
Mechanochemical optimization of ZIF-8/Carbon/S8 composites for lithium-sulfur batteries positive electrodes (2021)
Souza, Breno Luiz de ; Chauque, Susana ; Oliveira, Paulo Filho Marques de ; Emmerling, Franziska F; Torresi, Roberto Manuel
Source: Journal of Electroanalytical Chemistry. Unidade: IQ
Subjects: MATERIAIS COMPÓSITOS, LÍTIO, ENXOFRE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Breno Luiz de et al. Mechanochemical optimization of ZIF-8/Carbon/S8 composites for lithium-sulfur batteries positive electrodes. Journal of Electroanalytical Chemistry, v. 896, p. 1-9 art. 115459, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.jelechem.2021.115459. Acesso em: 07 set. 2024.
APA
Souza, B. L. de, Chauque, S., Oliveira, P. F. M. de, Emmerling, F. F., & Torresi, R. M. (2021). Mechanochemical optimization of ZIF-8/Carbon/S8 composites for lithium-sulfur batteries positive electrodes. Journal of Electroanalytical Chemistry, 896, 1-9 art. 115459. doi:10.1016/j.jelechem.2021.115459
NLM
Souza BL de, Chauque S, Oliveira PFM de, Emmerling FF, Torresi RM. Mechanochemical optimization of ZIF-8/Carbon/S8 composites for lithium-sulfur batteries positive electrodes [Internet]. Journal of Electroanalytical Chemistry. 2021 ; 896 1-9 art. 115459.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.jelechem.2021.115459
Vancouver
Souza BL de, Chauque S, Oliveira PFM de, Emmerling FF, Torresi RM. Mechanochemical optimization of ZIF-8/Carbon/S8 composites for lithium-sulfur batteries positive electrodes [Internet]. Journal of Electroanalytical Chemistry. 2021 ; 896 1-9 art. 115459.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.jelechem.2021.115459
Artigo de periodico
Cellulose Nanocrystals Versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix (2020)
Ramires, Elaine Cristina; Megiatto Junior, Jackson D; Dufresne, Alain ; Frollini, Elisabete
Source: Fibers. Unidade: IQSC
Subjects: CELULOSE, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RAMIRES, Elaine Cristina et al. Cellulose Nanocrystals Versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix. Fibers, v. 8, n. 4, p. 21 Mar, 2020Tradução . . Disponível em: https://doi.org/10.3390/fib8040021. Acesso em: 07 set. 2024.
APA
Ramires, E. C., Megiatto Junior, J. D., Dufresne, A., & Frollini, E. (2020). Cellulose Nanocrystals Versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix. Fibers, 8( 4), 21 Mar. doi:10.3390/fib8040021
NLM
Ramires EC, Megiatto Junior JD, Dufresne A, Frollini E. Cellulose Nanocrystals Versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix [Internet]. Fibers. 2020 ; 8( 4): 21 Mar.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/fib8040021
Vancouver
Ramires EC, Megiatto Junior JD, Dufresne A, Frollini E. Cellulose Nanocrystals Versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix [Internet]. Fibers. 2020 ; 8( 4): 21 Mar.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/fib8040021
Trabalho de evento-anais periodico
Electrocatalysis of ethanol and methanol electrooxidation by composite electrodes with NiOOH/FeOOH supported on reduced graphene oxide onto composite electrodes (2020)
Oliveira, João Pedro Jenson de; Sá, Acelino Cardoso de ; Paim, Leonardo Lataro
Source: Chemistry Proceedings. Conference titles: International Electronic Conference on Catalysis Sciences. Unidade: IFSC
Subjects: ETANOL, METANOL, ELETROCATÁLISE, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, João Pedro Jenson de e SÁ, Acelino Cardoso de e PAIM, Leonardo Lataro. Electrocatalysis of ethanol and methanol electrooxidation by composite electrodes with NiOOH/FeOOH supported on reduced graphene oxide onto composite electrodes. Chemistry Proceedings. Basel: MDPI. Disponível em: https://doi.org/10.3390/ECCS2020-07523. Acesso em: 07 set. 2024. , 2020
APA
Oliveira, J. P. J. de, Sá, A. C. de, & Paim, L. L. (2020). Electrocatalysis of ethanol and methanol electrooxidation by composite electrodes with NiOOH/FeOOH supported on reduced graphene oxide onto composite electrodes. Chemistry Proceedings. Basel: MDPI. doi:10.3390/ECCS2020-07523
NLM
Oliveira JPJ de, Sá AC de, Paim LL. Electrocatalysis of ethanol and methanol electrooxidation by composite electrodes with NiOOH/FeOOH supported on reduced graphene oxide onto composite electrodes [Internet]. Chemistry Proceedings. 2020 ; 2( 1): 2-1-2-6.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ECCS2020-07523
Vancouver
Oliveira JPJ de, Sá AC de, Paim LL. Electrocatalysis of ethanol and methanol electrooxidation by composite electrodes with NiOOH/FeOOH supported on reduced graphene oxide onto composite electrodes [Internet]. Chemistry Proceedings. 2020 ; 2( 1): 2-1-2-6.[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ECCS2020-07523
Patente
A stimuli-responsive composite material, respective production process and application as a sensitive film (2016)
Roque, Ana Cecilia Afonso; Hussain, Abid; Gruber, Jonas ; Semeano, Ana Teresa Silva
Unidade: IQ
Subjects: MATERIAIS COMPÓSITOS, CRISTAIS LÍQUIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROQUE, Ana Cecilia Afonso et al. A stimuli-responsive composite material, respective production process and application as a sensitive film. . Genebra: Patent Cooperation Treaty (PCT); world Intellectual Property Organization (WIPO). . Acesso em: 07 set. 2024. , 2016
APA
Roque, A. C. A., Hussain, A., Gruber, J., & Semeano, A. T. S. (2016). A stimuli-responsive composite material, respective production process and application as a sensitive film. Genebra: Patent Cooperation Treaty (PCT); world Intellectual Property Organization (WIPO).
NLM
Roque ACA, Hussain A, Gruber J, Semeano ATS. A stimuli-responsive composite material, respective production process and application as a sensitive film. 2016 ;[citado 2024 set. 07 ]
Vancouver
Roque ACA, Hussain A, Gruber J, Semeano ATS. A stimuli-responsive composite material, respective production process and application as a sensitive film. 2016 ;[citado 2024 set. 07 ]
Artigo de periodico
Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering (2016)
Wang, Weiguang; Caetano, Guilherme; Ambler, William Stephen; Blaker, Jonny James; Frade, Marco Andrey Cipriani; Mandal, Parthasarathi; Diver, Carl; Bártolo, Paulo
Source: Materials. Unidade: FMRP
Subjects: BIOMATERIAIS, MATERIAIS COMPÓSITOS, ENGENHARIA TECIDUAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
WANG, Weiguang et al. Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering. Materials, v. 9, n. 12, 2016Tradução . . Disponível em: https://doi.org/10.3390/ma9120992. Acesso em: 07 set. 2024.
APA
Wang, W., Caetano, G., Ambler, W. S., Blaker, J. J., Frade, M. A. C., Mandal, P., et al. (2016). Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering. Materials, 9( 12). doi:10.3390/ma9120992
NLM
Wang W, Caetano G, Ambler WS, Blaker JJ, Frade MAC, Mandal P, Diver C, Bártolo P. Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering [Internet]. Materials. 2016 ; 9( 12):[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ma9120992
Vancouver
Wang W, Caetano G, Ambler WS, Blaker JJ, Frade MAC, Mandal P, Diver C, Bártolo P. Enhancing the hydrophilicity and cell attachment of 3D printed PCL/graphene scaffolds for bone tissue engineering [Internet]. Materials. 2016 ; 9( 12):[citado 2024 set. 07 ] Available from: https://doi.org/10.3390/ma9120992
Parte de monografia/livro
Composite structures design and analysis (2016)
Tita, Volnei
Source: Dynamics of Smart System and Structures : concepts and applications. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, ESTRUTURAS MISTAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TITA, Volnei. Composite structures design and analysis. Dynamics of Smart System and Structures : concepts and applications. Tradução . Cham, Switzerland: Springer, 2016. . Disponível em: https://doi.org/10.1007/978-3-319-29982-2. Acesso em: 07 set. 2024.
APA
Tita, V. (2016). Composite structures design and analysis. In Dynamics of Smart System and Structures : concepts and applications. Cham, Switzerland: Springer. doi:10.1007/978-3-319-29982-2
NLM
Tita V. Composite structures design and analysis [Internet]. In: Dynamics of Smart System and Structures : concepts and applications. Cham, Switzerland: Springer; 2016. [citado 2024 set. 07 ] Available from: https://doi.org/10.1007/978-3-319-29982-2
Vancouver
Tita V. Composite structures design and analysis [Internet]. In: Dynamics of Smart System and Structures : concepts and applications. Cham, Switzerland: Springer; 2016. [citado 2024 set. 07 ] Available from: https://doi.org/10.1007/978-3-319-29982-2
Artigo de periodico
Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives (2015)
Battistelle, Rosane Aparecida Gomes; Bezerra, Barbara Stolte; Valarelli, Ivaldo de Domenico; Branco, Luiz Antônio Melgaço Nunes; Chahud, Eduardo; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Advanced Materials Research. Unidade: EESC
Subjects: PLÁSTICOS, MATERIAIS COMPÓSITOS, CANA-DE-AÇÚCAR, BAGAÇOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BATTISTELLE, Rosane Aparecida Gomes et al. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, v. 1088, p. 407-410, 2015Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1088.407. Acesso em: 07 set. 2024.
APA
Battistelle, R. A. G., Bezerra, B. S., Valarelli, I. de D., Branco, L. A. M. N., Chahud, E., Christoforo, A. L., & Lahr, F. A. R. (2015). Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives. Advanced Materials Research, 1088, 407-410. doi:10.4028/www.scientific.net/AMR.1088.407
NLM
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Vancouver
Battistelle RAG, Bezerra BS, Valarelli I de D, Branco LAMN, Chahud E, Christoforo AL, Lahr FAR. Evaluation of a plastic composite produced with residues of sugarcane bagasse and polypropylene without additives [Internet]. Advanced Materials Research. 2015 ; 1088 407-410.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1088.407
Artigo de periodico
New composite porphyrin-conductive polymer gas sensors for application in electronic noses (2014)
Esteves, Carlos Henrique Alves; Iglesias, Bernardo Almeida; Li, Rosamaria Wu Chia; Ogawa, Takuji; Araki, Koiti ; Gruber, Jonas
Source: Sensors and Actuators B. Unidade: IQ
Subjects: POLÍMEROS (QUÍMICA ORGÂNICA), MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESTEVES, Carlos Henrique Alves et al. New composite porphyrin-conductive polymer gas sensors for application in electronic noses. Sensors and Actuators B, v. 193, p. 136-141, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.snb.2013.11.022. Acesso em: 07 set. 2024.
APA
Esteves, C. H. A., Iglesias, B. A., Li, R. W. C., Ogawa, T., Araki, K., & Gruber, J. (2014). New composite porphyrin-conductive polymer gas sensors for application in electronic noses. Sensors and Actuators B, 193, 136-141. doi:10.1016/j.snb.2013.11.022
NLM
Esteves CHA, Iglesias BA, Li RWC, Ogawa T, Araki K, Gruber J. New composite porphyrin-conductive polymer gas sensors for application in electronic noses [Internet]. Sensors and Actuators B. 2014 ; 193 136-141.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.snb.2013.11.022
Vancouver
Esteves CHA, Iglesias BA, Li RWC, Ogawa T, Araki K, Gruber J. New composite porphyrin-conductive polymer gas sensors for application in electronic noses [Internet]. Sensors and Actuators B. 2014 ; 193 136-141.[citado 2024 set. 07 ] Available from: https://doi.org/10.1016/j.snb.2013.11.022
Artigo de periodico
Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix (2014)
Marques, Maria Gorett dos Santos; Melo Filho, João de Almeida; Molina, Julio Cesar; Toledo Filho, Romildo Dias; Vasconcelos, Raimundo Pereira de; Calil Junior, Carlito
Source: Key Engineering Materials. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS (SIMULAÇÃO NUMÉRICA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Maria Gorett dos Santos et al. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix. Key Engineering Materials, v. 600, p. 460-468, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/KEM.600.460. Acesso em: 07 set. 2024.
APA
Marques, M. G. dos S., Melo Filho, J. de A., Molina, J. C., Toledo Filho, R. D., Vasconcelos, R. P. de, & Calil Junior, C. (2014). Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix. Key Engineering Materials, 600, 460-468. doi:10.4028/www.scientific.net/KEM.600.460
NLM
Marques MG dos S, Melo Filho J de A, Molina JC, Toledo Filho RD, Vasconcelos RP de, Calil Junior C. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix [Internet]. Key Engineering Materials. 2014 ; 600 460-468.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.460
Vancouver
Marques MG dos S, Melo Filho J de A, Molina JC, Toledo Filho RD, Vasconcelos RP de, Calil Junior C. Numerical-experimental assessment of the Arumã fiber as reinforcement to the cementitious matrix [Internet]. Key Engineering Materials. 2014 ; 600 460-468.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/KEM.600.460
Artigo de periodico
Simulation analysis of in-service bamboo and pine EGP composite flooring (2014)
Barbosa, Juliana Cortez; Silva, José Reinaldo Moreira da; Alvarenga, Fabiano de; Souza, Alexandre Jorge Duarte de; Araujo, Victor Almeida de ; Garcia, José Nivaldo
Source: Advanced Materials Research. Unidade: ESALQ
Subjects: BAMBU, MATERIAIS COMPÓSITOS, PAINÉIS, PINHEIRO, PISOS DE MADEIRA, SIMULAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARBOSA, Juliana Cortez et al. Simulation analysis of in-service bamboo and pine EGP composite flooring. Advanced Materials Research, v. 1025-1026, p. 233-240, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.233. Acesso em: 07 set. 2024.
APA
Barbosa, J. C., Silva, J. R. M. da, Alvarenga, F. de, Souza, A. J. D. de, Araujo, V. A. de, & Garcia, J. N. (2014). Simulation analysis of in-service bamboo and pine EGP composite flooring. Advanced Materials Research, 1025-1026, 233-240. doi:10.4028/www.scientific.net/AMR.1025-1026.233
NLM
Barbosa JC, Silva JRM da, Alvarenga F de, Souza AJD de, Araujo VA de, Garcia JN. Simulation analysis of in-service bamboo and pine EGP composite flooring [Internet]. Advanced Materials Research. 2014 ; 1025-1026 233-240.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.233
Vancouver
Barbosa JC, Silva JRM da, Alvarenga F de, Souza AJD de, Araujo VA de, Garcia JN. Simulation analysis of in-service bamboo and pine EGP composite flooring [Internet]. Advanced Materials Research. 2014 ; 1025-1026 233-240.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.233
Trabalho de evento-anais periodico
Characterization of composites based on 316 stainless steel and zirconia for use as functionally graded materials (2014)
Arantes, Vera Lúcia; Agudelo, Leonardo Grajales; Di Lorenzo, Pedro Luiz
Source: Materials Science Forum. Conference titles: International Latin American Conference on Powder Technology - PTECH. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, AÇO INOXIDÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARANTES, Vera Lúcia e AGUDELO, Leonardo Grajales e DI LORENZO, Pedro Luiz. Characterization of composites based on 316 stainless steel and zirconia for use as functionally graded materials. Materials Science Forum. Pfaffikon: Trans Tech Publications Ltd. Disponível em: https://doi.org/10.4028/www.scientific.net/MSF.802.120. Acesso em: 07 set. 2024. , 2014
APA
Arantes, V. L., Agudelo, L. G., & Di Lorenzo, P. L. (2014). Characterization of composites based on 316 stainless steel and zirconia for use as functionally graded materials. Materials Science Forum. Pfaffikon: Trans Tech Publications Ltd. doi:10.4028/www.scientific.net/MSF.802.120
NLM
Arantes VL, Agudelo LG, Di Lorenzo PL. Characterization of composites based on 316 stainless steel and zirconia for use as functionally graded materials [Internet]. Materials Science Forum. 2014 ; 802 120-124.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.802.120
Vancouver
Arantes VL, Agudelo LG, Di Lorenzo PL. Characterization of composites based on 316 stainless steel and zirconia for use as functionally graded materials [Internet]. Materials Science Forum. 2014 ; 802 120-124.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.802.120
Artigo de periodico
Use of glass particles from recovered LCD screen components as fillers for polyamide-6 (2014)
Massaro, Natalia; Morais, Douglas; Toffoli, Samuel Márcio ; Valera, Ticiane Sanches
Source: Materials Science Forum. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS, VIDRO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MASSARO, Natalia et al. Use of glass particles from recovered LCD screen components as fillers for polyamide-6. Materials Science Forum, v. 798-799, p. 628-631, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/MSF.798-799.628. Acesso em: 07 set. 2024.
APA
Massaro, N., Morais, D., Toffoli, S. M., & Valera, T. S. (2014). Use of glass particles from recovered LCD screen components as fillers for polyamide-6. Materials Science Forum, 798-799, 628-631. doi:10.4028/www.scientific.net/MSF.798-799.628
NLM
Massaro N, Morais D, Toffoli SM, Valera TS. Use of glass particles from recovered LCD screen components as fillers for polyamide-6 [Internet]. Materials Science Forum. 2014 ; 798-799 628-631.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.798-799.628
Vancouver
Massaro N, Morais D, Toffoli SM, Valera TS. Use of glass particles from recovered LCD screen components as fillers for polyamide-6 [Internet]. Materials Science Forum. 2014 ; 798-799 628-631.[citado 2024 set. 07 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.798-799.628

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration