ReP USP - Resultado da busca

Artigo de periodico
Development of a numerical and analytical methodology for analyzing hybrid laminates with multi-oriented piezoelectric and structural layers (2024)
Longo, Janice; Silva, Matheus Rodrigues; Santana, Humberto Brito; Ferreira, Antonio Joaquim Mendes; Tita, Volnei ; Medeiros, Ricardo de
Source: Composite Structures. Unidade: EESC
Subjects: PIEZOELETRICIDADE, MÉTODO DOS ELEMENTOS FINITOS, ATUADORES PIEZELÉTRICOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LONGO, Janice et al. Development of a numerical and analytical methodology for analyzing hybrid laminates with multi-oriented piezoelectric and structural layers. Composite Structures, v. 349-350, p. 1-9, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.compstruct.2024.118506. Acesso em: 04 nov. 2024.
APA
Longo, J., Silva, M. R., Santana, H. B., Ferreira, A. J. M., Tita, V., & Medeiros, R. de. (2024). Development of a numerical and analytical methodology for analyzing hybrid laminates with multi-oriented piezoelectric and structural layers. Composite Structures, 349-350, 1-9. doi:10.1016/j.compstruct.2024.118506
NLM
Longo J, Silva MR, Santana HB, Ferreira AJM, Tita V, Medeiros R de. Development of a numerical and analytical methodology for analyzing hybrid laminates with multi-oriented piezoelectric and structural layers [Internet]. Composite Structures. 2024 ; 349-350 1-9.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2024.118506
Vancouver
Longo J, Silva MR, Santana HB, Ferreira AJM, Tita V, Medeiros R de. Development of a numerical and analytical methodology for analyzing hybrid laminates with multi-oriented piezoelectric and structural layers [Internet]. Composite Structures. 2024 ; 349-350 1-9.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2024.118506
Artigo de periodico
A nonlinear finite element analysis of laminated shells with a damage model (2024)
Santana, Pedro Bührer; Ferreira, A. J. M.; Gomes, Herbert Martins; Tita, Volnei
Source: Composites Part C: Open Access. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, DANO, ANÁLISE NÃO LINEAR DE ESTRUTURAS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Pedro Bührer et al. A nonlinear finite element analysis of laminated shells with a damage model. Composites Part C: Open Access, v. 15, p. 1-14, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jcomc.2024.100505. Acesso em: 04 nov. 2024.
APA
Santana, P. B., Ferreira, A. J. M., Gomes, H. M., & Tita, V. (2024). A nonlinear finite element analysis of laminated shells with a damage model. Composites Part C: Open Access, 15, 1-14. doi:10.1016/j.jcomc.2024.100505
NLM
Santana PB, Ferreira AJM, Gomes HM, Tita V. A nonlinear finite element analysis of laminated shells with a damage model [Internet]. Composites Part C: Open Access. 2024 ; 15 1-14.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.jcomc.2024.100505
Vancouver
Santana PB, Ferreira AJM, Gomes HM, Tita V. A nonlinear finite element analysis of laminated shells with a damage model [Internet]. Composites Part C: Open Access. 2024 ; 15 1-14.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.jcomc.2024.100505
Artigo de periodico
Multiscale modelling of composite laminates with voids through the direct FE2 method (2024)
Christoff, Bruno Guilherme; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Maciel, Maísa Milanez Ávila Dias; Guedes, Rui Miranda; Tita, Volnei
Source: Theoretical and Applied Fracture Mechanics. Unidade: EESC
Subjects: LAMINADOS, MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Multiscale modelling of composite laminates with voids through the direct FE2 method. Theoretical and Applied Fracture Mechanics, v. 131, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.tafmec.2024.104424. Acesso em: 04 nov. 2024.
APA
Christoff, B. G., Almeida Júnior, J. H. S., Ribeiro, M. L., Maciel, M. M. Á. D., Guedes, R. M., & Tita, V. (2024). Multiscale modelling of composite laminates with voids through the direct FE2 method. Theoretical and Applied Fracture Mechanics, 131, 1-14. doi:10.1016/j.tafmec.2024.104424
NLM
Christoff BG, Almeida Júnior JHS, Ribeiro ML, Maciel MMÁD, Guedes RM, Tita V. Multiscale modelling of composite laminates with voids through the direct FE2 method [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-14.[citado 2024 nov. 04 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104424
Vancouver
Christoff BG, Almeida Júnior JHS, Ribeiro ML, Maciel MMÁD, Guedes RM, Tita V. Multiscale modelling of composite laminates with voids through the direct FE2 method [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-14.[citado 2024 nov. 04 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104424
Artigo de periodico
Nonlinear finite element damage analysis of laminated shells by Carrera Unified Formulation (2024)
Santana, Pedro Bührer; Ferreira, Antonio Joaquim Mendes; Gomes, Herbert Martins; Tita, Volnei
Source: Composite Structures. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ANÁLISE NÃO LINEAR DE ESTRUTURAS, DANO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Pedro Bührer et al. Nonlinear finite element damage analysis of laminated shells by Carrera Unified Formulation. Composite Structures, v. 348, p. 1-16, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.compstruct.2024.118506. Acesso em: 04 nov. 2024.
APA
Santana, P. B., Ferreira, A. J. M., Gomes, H. M., & Tita, V. (2024). Nonlinear finite element damage analysis of laminated shells by Carrera Unified Formulation. Composite Structures, 348, 1-16. doi:10.1016/j.compstruct.2024.118494
NLM
Santana PB, Ferreira AJM, Gomes HM, Tita V. Nonlinear finite element damage analysis of laminated shells by Carrera Unified Formulation [Internet]. Composite Structures. 2024 ; 348 1-16.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2024.118506
Vancouver
Santana PB, Ferreira AJM, Gomes HM, Tita V. Nonlinear finite element damage analysis of laminated shells by Carrera Unified Formulation [Internet]. Composite Structures. 2024 ; 348 1-16.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1016/j.compstruct.2024.118506
Artigo de periodico
A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach (2023)
Santana, Pedro Bührer; Gomes, Herbert Martins; Ferreira, António Mendes; Tita, Volnei
Source: Latin American Journal of Solids and Structures. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Pedro Bührer et al. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach. Latin American Journal of Solids and Structures, v. 20, n. 6, p. 1-16, 2023Tradução . . Disponível em: http://dx.doi.org/10.1590/1679-78257577. Acesso em: 04 nov. 2024.
APA
Santana, P. B., Gomes, H. M., Ferreira, A. M., & Tita, V. (2023). A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach. Latin American Journal of Solids and Structures, 20( 6), 1-16. doi:10.1590/1679-78257577
NLM
Santana PB, Gomes HM, Ferreira AM, Tita V. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach [Internet]. Latin American Journal of Solids and Structures. 2023 ; 20( 6): 1-16.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1590/1679-78257577
Vancouver
Santana PB, Gomes HM, Ferreira AM, Tita V. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach [Internet]. Latin American Journal of Solids and Structures. 2023 ; 20( 6): 1-16.[citado 2024 nov. 04 ] Available from: http://dx.doi.org/10.1590/1679-78257577
Trabalho de evento
Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law (2023)
Silva, Jailton A. P. da; Beck, Rafael; Silva, Lucas F. M. da; Tita, Volnei ; Medeiros, Ricardo de
Conference titles: Ibero-American Conference on Composite Materials - IAMaC. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Jailton A. P. da et al. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law. 2023, Anais.. São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf. Acesso em: 04 nov. 2024.
APA
Silva, J. A. P. da, Beck, R., Silva, L. F. M. da, Tita, V., & Medeiros, R. de. (2023). Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law. In . São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf
NLM
Silva JAP da, Beck R, Silva LFM da, Tita V, Medeiros R de. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law [Internet]. 2023 ;[citado 2024 nov. 04 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf
Vancouver
Silva JAP da, Beck R, Silva LFM da, Tita V, Medeiros R de. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law [Internet]. 2023 ;[citado 2024 nov. 04 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf
Artigo de periodico
Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method (2022)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Talreja, Ramesh; Tita, Volnei
Source: Composites Part C: Open Access. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, p. 1-14, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.jcomc.2022.100303. Acesso em: 04 nov. 2024.
APA
Christoff, B. G., Brito Santana, H., Talreja, R., & Tita, V. (2022). Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method. Composites Part C: Open Access, 1-14. doi:10.1016/j.jcomc.2022.100303
NLM
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Vancouver
Christoff BG, Brito Santana H, Talreja R, Tita V. Multiscale embedded models to determine effective mechanical properties of composite materials: asymptotic Homogenization Method combined to Finite Element Method [Internet]. Composites Part C: Open Access. 2022 ; 1-14.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.jcomc.2022.100303
Tese (Doutorado)
Comportamento mecânico de juntas coladas de materiais compósitos: avaliação da influência das incertezas do processo de fabricação (2022)
Silva, Jailto Antonio Prado da; Tita, Volnei (Orientador)
Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, PROCESSOS DE FABRICAÇÃO (ENGENHARIA MECÂNICA), JUNTAS ESTRUTURAIS, COLAGEM, AERONAVES, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Jailto Antonio Prado da. Comportamento mecânico de juntas coladas de materiais compósitos: avaliação da influência das incertezas do processo de fabricação. 2022. Tese (Doutorado) – Universidade de São Paulo, São Carlos, 2022. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18148/tde-29062022-154527/. Acesso em: 04 nov. 2024.
APA
Silva, J. A. P. da. (2022). Comportamento mecânico de juntas coladas de materiais compósitos: avaliação da influência das incertezas do processo de fabricação (Tese (Doutorado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18148/tde-29062022-154527/
NLM
Silva JAP da. Comportamento mecânico de juntas coladas de materiais compósitos: avaliação da influência das incertezas do processo de fabricação [Internet]. 2022 ;[citado 2024 nov. 04 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18148/tde-29062022-154527/
Vancouver
Silva JAP da. Comportamento mecânico de juntas coladas de materiais compósitos: avaliação da influência das incertezas do processo de fabricação [Internet]. 2022 ;[citado 2024 nov. 04 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18148/tde-29062022-154527/
Artigo de periodico
A finite element unified formulation for composite laminates in bending considering progressive damage (2022)
Ferreira, Gregório Felipe Oliveira; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Ferreira, Antonio J. M.; Tita, Volnei
Source: Thin-Walled Structures. Unidade: EESC
Subjects: MECÂNICA DO DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, v. 172, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.tws.2021.108864. Acesso em: 04 nov. 2024.
APA
Ferreira, G. F. O., Almeida Júnior, J. H. S., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2022). A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, 172, 1-13. doi:10.1016/j.tws.2021.108864
NLM
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Vancouver
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.tws.2021.108864
Trabalho de evento
Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method (2021)
Santos, Matheus Vilar Mota; Sartorato, Murilo; Tita, Volnei ; Ribeiro, Marcelo Leite
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, FALHA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Matheus Vilar Mota et al. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf. Acesso em: 04 nov. 2024.
APA
Santos, M. V. M., Sartorato, M., Tita, V., & Ribeiro, M. L. (2021). Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf
NLM
Santos MVM, Sartorato M, Tita V, Ribeiro ML. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf
Vancouver
Santos MVM, Sartorato M, Tita V, Ribeiro ML. Analysis of delamination of composite laminates via XFEM based on the layerwise displacement theory and cohesive zone method [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/da47e720-d64c-4c4d-86eb-227be7723459/2985-8197-1-PB.pdf
Dissertação (Mestrado)
Evaluation of laminated composite plates behavior under shear-after-impatc loading conditions: a methodology proposal (2021)
Souza, Gabriel Sales Candido; Tita, Volnei (Orientador)
Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, LAMINADOS, MÉTODO DOS ELEMENTOS FINITOS, CISALHAMENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Gabriel Sales Candido. Evaluation of laminated composite plates behavior under shear-after-impatc loading conditions: a methodology proposal. 2021. Dissertação (Mestrado) – Universidade de São Paulo, São Carlos, 2021. Disponível em: https://www.teses.usp.br/teses/disponiveis/18/18161/tde-05082021-081042/. Acesso em: 04 nov. 2024.
APA
Souza, G. S. C. (2021). Evaluation of laminated composite plates behavior under shear-after-impatc loading conditions: a methodology proposal (Dissertação (Mestrado). Universidade de São Paulo, São Carlos. Recuperado de https://www.teses.usp.br/teses/disponiveis/18/18161/tde-05082021-081042/
NLM
Souza GSC. Evaluation of laminated composite plates behavior under shear-after-impatc loading conditions: a methodology proposal [Internet]. 2021 ;[citado 2024 nov. 04 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18161/tde-05082021-081042/
Vancouver
Souza GSC. Evaluation of laminated composite plates behavior under shear-after-impatc loading conditions: a methodology proposal [Internet]. 2021 ;[citado 2024 nov. 04 ] Available from: https://www.teses.usp.br/teses/disponiveis/18/18161/tde-05082021-081042/
Trabalho de evento
Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model (2021)
Silva, Jailto Antonio Prado da; Silva, Lucas Filipe Martins da; Ribeiro, Marcelo Leite ; Tita, Volnei
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURA DE AERONAVES, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Jailto Antonio Prado da et al. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf. Acesso em: 04 nov. 2024.
APA
Silva, J. A. P. da, Silva, L. F. M. da, Ribeiro, M. L., & Tita, V. (2021). Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf
NLM
Silva JAP da, Silva LFM da, Ribeiro ML, Tita V. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf
Vancouver
Silva JAP da, Silva LFM da, Ribeiro ML, Tita V. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf
Trabalho de evento
A methodology for modeling variable axial laminates: a case study of a uniformly loaded circular plate (2021)
Maciel, Maísa Milanez Ávila; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Tita, Volnei
Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACIEL, Maísa Milanez Ávila et al. A methodology for modeling variable axial laminates: a case study of a uniformly loaded circular plate. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/0c8ccce2-ca31-481a-b1b9-7f62c1a18f56/2929-8022-1-PB.pdf. Acesso em: 04 nov. 2024.
APA
Maciel, M. M. Á., Almeida Júnior, J. H. S., Ribeiro, M. L., & Tita, V. (2021). A methodology for modeling variable axial laminates: a case study of a uniformly loaded circular plate. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/0c8ccce2-ca31-481a-b1b9-7f62c1a18f56/2929-8022-1-PB.pdf
NLM
Maciel MMÁ, Almeida Júnior JHS, Ribeiro ML, Tita V. A methodology for modeling variable axial laminates: a case study of a uniformly loaded circular plate [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/0c8ccce2-ca31-481a-b1b9-7f62c1a18f56/2929-8022-1-PB.pdf
Vancouver
Maciel MMÁ, Almeida Júnior JHS, Ribeiro ML, Tita V. A methodology for modeling variable axial laminates: a case study of a uniformly loaded circular plate [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/0c8ccce2-ca31-481a-b1b9-7f62c1a18f56/2929-8022-1-PB.pdf
Artigo de periodico
Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) (2021)
Gonilha, Jose A.; Silvestre, Nuno; Correia, João R.; Tita, Volnei ; Martins, David
Source: Composite Structures. Unidade: EESC
Subjects: DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GONILHA, Jose A. et al. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I). Composite Structures, v. 255, p. 1-22, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2020.112974. Acesso em: 04 nov. 2024.
APA
Gonilha, J. A., Silvestre, N., Correia, J. R., Tita, V., & Martins, D. (2021). Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I). Composite Structures, 255, 1-22. doi:10.1016/j.compstruct.2020.112974
NLM
Gonilha JA, Silvestre N, Correia JR, Tita V, Martins D. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) [Internet]. Composite Structures. 2021 ; 255 1-22.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112974
Vancouver
Gonilha JA, Silvestre N, Correia JR, Tita V, Martins D. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) [Internet]. Composite Structures. 2021 ; 255 1-22.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112974
Artigo de periodico
Development of a finite element via unified formulation: implementation as a user element subroutine to predict stress profiles in composite plates (2020)
Ferreira, Gregório Felipe Oliveira; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Ferreira, António J. M.; Tita, Volnei
Source: Thin-Walled Structures. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, LAMINADOS, AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. Development of a finite element via unified formulation: implementation as a user element subroutine to predict stress profiles in composite plates. Thin-Walled Structures, v. 157, p. 1-19, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.tws.2020.107107. Acesso em: 04 nov. 2024.
APA
Ferreira, G. F. O., Almeida Júnior, J. H. S., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2020). Development of a finite element via unified formulation: implementation as a user element subroutine to predict stress profiles in composite plates. Thin-Walled Structures, 157, 1-19. doi:10.1016/j.tws.2020.107107
NLM
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. Development of a finite element via unified formulation: implementation as a user element subroutine to predict stress profiles in composite plates [Internet]. Thin-Walled Structures. 2020 ; 157 1-19.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.tws.2020.107107
Vancouver
Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. Development of a finite element via unified formulation: implementation as a user element subroutine to predict stress profiles in composite plates [Internet]. Thin-Walled Structures. 2020 ; 157 1-19.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.tws.2020.107107
Artigo de periodico
Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method (2020)
Christoff, Bruno Guilherme; Brito Santana, Humberto; Talreja, Ramesh; Tita, Volnei
Source: Finite Elements in Analysis and Design. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, HOMOGENEIZAÇÃO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFF, Bruno Guilherme et al. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method. Finite Elements in Analysis and Design, v. 181, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.finel.2020.103482. Acesso em: 04 nov. 2024.
APA
Christoff, B. G., Brito Santana, H., Talreja, R., & Tita, V. (2020). Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method. Finite Elements in Analysis and Design, 181, 1-13. doi:10.1016/j.finel.2020.103482
NLM
Christoff BG, Brito Santana H, Talreja R, Tita V. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method [Internet]. Finite Elements in Analysis and Design. 2020 ; 181 1-13.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.finel.2020.103482
Vancouver
Christoff BG, Brito Santana H, Talreja R, Tita V. Development of an ABAQUS™ plug-in to evaluate the fourth-order elasticity tensor of a periodic material via homogenization by the asymptotic expansion method [Internet]. Finite Elements in Analysis and Design. 2020 ; 181 1-13.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.finel.2020.103482
Trabalho de evento
Vibration-based structural monitoring of bi-clamped metal-composite bonded joint: experimental and numerical analyses (2020)
Medeiros, Ricardo de; Souza, G. S. C.; Marques, D. E. T.; Flor, F. R.; Tita, Volnei
Source: The Journal of Adhesion. Unidade: EESC
Subjects: VIBRAÇÕES, MÉTODO DOS ELEMENTOS FINITOS, DANO, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Ricardo de et al. Vibration-based structural monitoring of bi-clamped metal-composite bonded joint: experimental and numerical analyses. 2020, Anais.. New York, NY, USA: Taylor & Francis, 2020. p. 1-27. Disponível em: https://doi.org/10.1080/00218464.2020.1711742. Acesso em: 04 nov. 2024.
APA
Medeiros, R. de, Souza, G. S. C., Marques, D. E. T., Flor, F. R., & Tita, V. (2020). Vibration-based structural monitoring of bi-clamped metal-composite bonded joint: experimental and numerical analyses. In The Journal of Adhesion (p. 1-27). New York, NY, USA: Taylor & Francis. doi:10.1080/00218464.2020.1711742
NLM
Medeiros R de, Souza GSC, Marques DET, Flor FR, Tita V. Vibration-based structural monitoring of bi-clamped metal-composite bonded joint: experimental and numerical analyses [Internet]. The Journal of Adhesion. 2020 ; 1-27.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1080/00218464.2020.1711742
Vancouver
Medeiros R de, Souza GSC, Marques DET, Flor FR, Tita V. Vibration-based structural monitoring of bi-clamped metal-composite bonded joint: experimental and numerical analyses [Internet]. The Journal of Adhesion. 2020 ; 1-27.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1080/00218464.2020.1711742
Artigo de periodico
Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout (2019)
Almeida Júnior, José Humberto Santos; Bittrich, Lars; Jansen, Eelco; Tita, Volnei ; Spickenheuer, Axel
Source: Composite Structures. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA JÚNIOR, José Humberto Santos et al. Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout. Composite Structures, v. 222, p. 1-12, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2019.110928. Acesso em: 04 nov. 2024.
APA
Almeida Júnior, J. H. S., Bittrich, L., Jansen, E., Tita, V., & Spickenheuer, A. (2019). Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout. Composite Structures, 222, 1-12. doi:10.1016/j.compstruct.2019.110928
NLM
Almeida Júnior JHS, Bittrich L, Jansen E, Tita V, Spickenheuer A. Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout [Internet]. Composite Structures. 2019 ; 222 1-12.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.compstruct.2019.110928
Vancouver
Almeida Júnior JHS, Bittrich L, Jansen E, Tita V, Spickenheuer A. Buckling optimization of composite cylinders for axial compression: A design methodology considering a variable-axial fiber layout [Internet]. Composite Structures. 2019 ; 222 1-12.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.compstruct.2019.110928
Artigo de periodico
Delamination influence on elastic properties of laminated composites (2019)
Santana, Humberto Brito; Christoff, Bruno Guilherme; Ferreira, Antonio Joaquim Mendes; Lebon, Frédéric; Rodríguez Ramos, Reinaldo; Tita, Volnei
Source: Acta Mechanica. Unidade: EESC
Subjects: LAMINADOS, HOMOGENEIZAÇÃO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTANA, Humberto Brito et al. Delamination influence on elastic properties of laminated composites. Acta Mechanica, v. 230, n. 3, p. 821-837, 2019Tradução . . Disponível em: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf. Acesso em: 04 nov. 2024.
APA
Santana, H. B., Christoff, B. G., Ferreira, A. J. M., Lebon, F., Rodríguez Ramos, R., & Tita, V. (2019). Delamination influence on elastic properties of laminated composites. Acta Mechanica, 230( 3), 821-837. Recuperado de https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
NLM
Santana HB, Christoff BG, Ferreira AJM, Lebon F, Rodríguez Ramos R, Tita V. Delamination influence on elastic properties of laminated composites [Internet]. Acta Mechanica. 2019 ; 230( 3): 821-837.[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
Vancouver
Santana HB, Christoff BG, Ferreira AJM, Lebon F, Rodríguez Ramos R, Tita V. Delamination influence on elastic properties of laminated composites [Internet]. Acta Mechanica. 2019 ; 230( 3): 821-837.[citado 2024 nov. 04 ] Available from: https://repositorio.usp.br/directbitstream/80c3b7e2-7489-4291-8a45-3b33d0619691/artigo%2021%20-%20Delamination%20influence%20on%20elastic%20properties%20of%20laminated%20composites.%20%28ACTA%20MECHANICA%29.pdf
Trabalho de evento-anais periodico
Computational analyses of composite plates under low-velocity impact loading (2019)
Ferreira, Gregório Felipe Oliveira; Ribeiro, Marcelo Leite ; Ferreira, Antonio Joaquim Mendes; Tita, Volnei
Source: Materials Today: Proceedings. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS, FALHA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Gregório Felipe Oliveira et al. Computational analyses of composite plates under low-velocity impact loading. Materials Today: Proceedings. Amsterdam, Netherlands: Elsevier BV. Disponível em: https://doi.org/10.1016/j.matpr.2019.02.020. Acesso em: 04 nov. 2024. , 2019
APA
Ferreira, G. F. O., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2019). Computational analyses of composite plates under low-velocity impact loading. Materials Today: Proceedings. Amsterdam, Netherlands: Elsevier BV. doi:10.1016/j.matpr.2019.02.020
NLM
Ferreira GFO, Ribeiro ML, Ferreira AJM, Tita V. Computational analyses of composite plates under low-velocity impact loading [Internet]. Materials Today: Proceedings. 2019 ; 8 778-788.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matpr.2019.02.020
Vancouver
Ferreira GFO, Ribeiro ML, Ferreira AJM, Tita V. Computational analyses of composite plates under low-velocity impact loading [Internet]. Materials Today: Proceedings. 2019 ; 8 778-788.[citado 2024 nov. 04 ] Available from: https://doi.org/10.1016/j.matpr.2019.02.020

USP Schools

ReP

Filtros

Document Types

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration