ReP USP - Resultado da busca

Artigo de periodico
Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments (2020)
Mariani, Fábio Edson; Rêgo, Galtiere Corrêa ; Bonella, Pedro Gabriel; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Fonte: Journal of Materials Engineering and Performance. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, FERRO FUNDIDO CINZENTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments. Journal of Materials Engineering and Performance, v. fe 2020, p. 3516-3522, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11665-020-04645-9. Acesso em: 16 nov. 2024.
APA
Mariani, F. E., Rêgo, G. C., Bonella, P. G., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2020). Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments. Journal of Materials Engineering and Performance, fe 2020, 3516-3522. doi:10.1007/s11665-020-04645-9
NLM
Mariani FE, Rêgo GC, Bonella PG, Lombardi Neto A, Totten GE, Casteletti LC. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments [Internet]. Journal of Materials Engineering and Performance. 2020 ; fe 2020 3516-3522.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11665-020-04645-9
Vancouver
Mariani FE, Rêgo GC, Bonella PG, Lombardi Neto A, Totten GE, Casteletti LC. Wear resistance of niobium carbide layers produced on gray cast iron by thermoreactive treatments [Internet]. Journal of Materials Engineering and Performance. 2020 ; fe 2020 3516-3522.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11665-020-04645-9
Artigo de periodico
Production and characterization of boride and carbide layers on AISI 15B30 steel (2020)
Triani, Rafael Magalhães; Gomes, Lucas Fuscaldi De Assis; Lombardi Neto, Amadeu; Totten, George Edward; Casteletti, Luiz Carlos
Fonte: Journal of Materials Engineering and Performance. Unidade: EESC
Assuntos: AÇO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRIANI, Rafael Magalhães et al. Production and characterization of boride and carbide layers on AISI 15B30 steel. Journal of Materials Engineering and Performance, v. 29, p. 3534-3541, 2020Tradução . . Disponível em: https://doi.org/10.1007/s11665-020-04698-w. Acesso em: 16 nov. 2024.
APA
Triani, R. M., Gomes, L. F. D. A., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2020). Production and characterization of boride and carbide layers on AISI 15B30 steel. Journal of Materials Engineering and Performance, 29, 3534-3541. doi:10.1007/s11665-020-04698-w
NLM
Triani RM, Gomes LFDA, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride and carbide layers on AISI 15B30 steel [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3534-3541.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11665-020-04698-w
Vancouver
Triani RM, Gomes LFDA, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride and carbide layers on AISI 15B30 steel [Internet]. Journal of Materials Engineering and Performance. 2020 ; 29 3534-3541.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1007/s11665-020-04698-w
Artigo de periodico
Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments (2017)
Soares, Carolina ; Mariani, Fábio Edson ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: NIÓBIO, FERRO FUNDIDO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Carolina et al. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments. Materials Performance and Characterization, v. 6, n. 4, p. 607-616, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160093. Acesso em: 16 nov. 2024.
APA
Soares, C., Mariani, F. E., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments. Materials Performance and Characterization, 6( 4), 607-616. doi:10.1520/MPC20160093
NLM
Soares C, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 607-616.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160093
Vancouver
Soares C, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Characterization of niobium carbide layers produced in ductile cast iron using thermo-reactive treatments [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 607-616.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160093
Artigo de periodico
Aging of a Fe-Mn-Al steel using plasma nitrocarburizing (2017)
Takeya, Gustavo Satoru ; Mariani, Fábio Edson ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, TRATAMENTO TÉRMICO, LIGAS METÁLICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKEYA, Gustavo Satoru et al. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing. Materials Performance and Characterization, v. 6, n. 4, p. 554-560, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160094. Acesso em: 16 nov. 2024.
APA
Takeya, G. S., Mariani, F. E., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Aging of a Fe-Mn-Al steel using plasma nitrocarburizing. Materials Performance and Characterization, 6( 4), 554-560. doi:10.1520/MPC20160094
NLM
Takeya GS, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 554-560.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160094
Vancouver
Takeya GS, Mariani FE, Casteletti LC, Lombardi Neto A, Totten GE. Aging of a Fe-Mn-Al steel using plasma nitrocarburizing [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 554-560.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160094
Artigo de periodico
Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels (2017)
Mariani, Fábio Edson ; Aureliano, Ricardo Tadeu ; Casteletti, Luiz Carlos ; Lombardi Neto, Amadeu ; Totten, George Edward
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL AUSTENÍTICO, DESGASTE DOS MATERIAIS, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels. Materials Performance and Characterization, v. 6, n. 4, p. 523-530, 2017Tradução . . Disponível em: https://doi.org/10.1520/MPC20160096. Acesso em: 16 nov. 2024.
APA
Mariani, F. E., Aureliano, R. T., Casteletti, L. C., Lombardi Neto, A., & Totten, G. E. (2017). Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels. Materials Performance and Characterization, 6( 4), 523-530. doi:10.1520/MPC20160096
NLM
Mariani FE, Aureliano RT, Casteletti LC, Lombardi Neto A, Totten GE. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 523-530.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160096
Vancouver
Mariani FE, Aureliano RT, Casteletti LC, Lombardi Neto A, Totten GE. Characterization and wear performance of borided AISI 304 and UNS S31254 stainless steels [Internet]. Materials Performance and Characterization. 2017 ; 6( 4): 523-530.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20160096
Artigo de periodico
Wear behavior of a borided nickel-based self-fluxing thermal spray coating (2016)
Mariani, Fábio Edson ; Rêgo, Galtiere Corrêa ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, REVESTIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Wear behavior of a borided nickel-based self-fluxing thermal spray coating. Materials Performance and Characterization, v. 5, n. 4, p. 414-422, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150064. Acesso em: 16 nov. 2024.
APA
Mariani, F. E., Rêgo, G. C., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Wear behavior of a borided nickel-based self-fluxing thermal spray coating. Materials Performance and Characterization, 5( 4), 414-422. doi:10.1520/MPC20150064
NLM
Mariani FE, Rêgo GC, Lombardi Neto A, Totten GE, Casteletti LC. Wear behavior of a borided nickel-based self-fluxing thermal spray coating [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 414-422.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150064
Vancouver
Mariani FE, Rêgo GC, Lombardi Neto A, Totten GE, Casteletti LC. Wear behavior of a borided nickel-based self-fluxing thermal spray coating [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 414-422.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150064
Artigo de periodico
Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel (2016)
Pereira, Ricardo Gomes; Mariani, Fábio Edson ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: AÇO FERRAMENTA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Ricardo Gomes et al. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel. Materials Performance and Characterization, v. 5, n. 4, p. 406-413, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150067. Acesso em: 16 nov. 2024.
APA
Pereira, R. G., Mariani, F. E., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel. Materials Performance and Characterization, 5( 4), 406-413. doi:10.1520/MPC20150067
NLM
Pereira RG, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 406-413.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150067
Vancouver
Pereira RG, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of layers produced by boriding and boriding-PVD on AISI D2 tool steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 406-413.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150067
Artigo de periodico
Production and characterization of boride coatings on flame-sprayed martensitic stainless steel (2016)
Mariani, Fábio Edson ; Takeya, Gustavo Satoru ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: DESGASTE DOS MATERIAIS, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Production and characterization of boride coatings on flame-sprayed martensitic stainless steel. Materials Performance and Characterization, v. 5, n. 4, p. 423-431, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150065. Acesso em: 16 nov. 2024.
APA
Mariani, F. E., Takeya, G. S., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Production and characterization of boride coatings on flame-sprayed martensitic stainless steel. Materials Performance and Characterization, 5( 4), 423-431. doi:10.1520/MPC20150065
NLM
Mariani FE, Takeya GS, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride coatings on flame-sprayed martensitic stainless steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 423-431.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150065
Vancouver
Mariani FE, Takeya GS, Lombardi Neto A, Totten GE, Casteletti LC. Production and characterization of boride coatings on flame-sprayed martensitic stainless steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 423-431.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150065
Artigo de periodico
Characterization of coatings obtained by boriding niobizing treatment of an AISI H13 steel (2016)
Takeya, Gustavo Satoru ; Mariani, Fábio Edson ; Lombardi Neto, Amadeu ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: AÇO FERRAMENTA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKEYA, Gustavo Satoru et al. Characterization of coatings obtained by boriding niobizing treatment of an AISI H13 steel. Materials Performance and Characterization, v. 5, n. 4, p. 396-405, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150066. Acesso em: 16 nov. 2024.
APA
Takeya, G. S., Mariani, F. E., Lombardi Neto, A., Totten, G. E., & Casteletti, L. C. (2016). Characterization of coatings obtained by boriding niobizing treatment of an AISI H13 steel. Materials Performance and Characterization, 5( 4), 396-405. doi:10.1520/MPC20150066
NLM
Takeya GS, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of coatings obtained by boriding niobizing treatment of an AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 396-405.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150066
Vancouver
Takeya GS, Mariani FE, Lombardi Neto A, Totten GE, Casteletti LC. Characterization of coatings obtained by boriding niobizing treatment of an AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 4): 396-405.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150066
Artigo de periodico
Influence of boronizing treatment on Fe–Mn–Al–Si–C steel (2016)
Casteletti, Luiz Carlos ; Takeya, Gustavo Satoru ; Lombardi Neto, Amadeu ; Picone, Carlos Alberto; Totten, George Edward
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: AÇO INOXIDÁVEL AUSTENÍTICO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CASTELETTI, Luiz Carlos et al. Influence of boronizing treatment on Fe–Mn–Al–Si–C steel. Materials Performance and Characterization, v. 5, n. 1, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150036. Acesso em: 16 nov. 2024.
APA
Casteletti, L. C., Takeya, G. S., Lombardi Neto, A., Picone, C. A., & Totten, G. E. (2016). Influence of boronizing treatment on Fe–Mn–Al–Si–C steel. Materials Performance and Characterization, 5( 1). doi:10.1520/MPC20150036
NLM
Casteletti LC, Takeya GS, Lombardi Neto A, Picone CA, Totten GE. Influence of boronizing treatment on Fe–Mn–Al–Si–C steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1):[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150036
Vancouver
Casteletti LC, Takeya GS, Lombardi Neto A, Picone CA, Totten GE. Influence of boronizing treatment on Fe–Mn–Al–Si–C steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1):[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150036
Artigo de periodico
Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel (2016)
Heck, Stênio Cristaldo; Lombardi Neto, Amadeu ; Picone, Carlos Alberto ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: Materials Performance and Characterization. Unidade: EESC
Assuntos: AÇO FERRAMENTA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
HECK, Stênio Cristaldo et al. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel. Materials Performance and Characterization, v. 5, n. 1, p. 47-53, 2016Tradução . . Disponível em: https://doi.org/10.1520/MPC20150041. Acesso em: 16 nov. 2024.
APA
Heck, S. C., Lombardi Neto, A., Picone, C. A., Totten, G. E., & Casteletti, L. C. (2016). Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel. Materials Performance and Characterization, 5( 1), 47-53. doi:10.1520/MPC20150041
NLM
Heck SC, Lombardi Neto A, Picone CA, Totten GE, Casteletti LC. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 47-53.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150041
Vancouver
Heck SC, Lombardi Neto A, Picone CA, Totten GE, Casteletti LC. Influence of pack boriding on the wear and corrosion resistance of AISI H13 steel [Internet]. Materials Performance and Characterization. 2016 ; 5( 1): 47-53.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1520/MPC20150041
Artigo de periodico
Plasma nitriding and nitrocarburising of a supermartensitic stainless steel (2012)
Fernandes, Frederico Augusto Pires ; Totten, George Edward ; Gallego, Juno; Casteletti, Luiz Carlos
Fonte: International Heat Treatment and Surface Engineering. Unidades: EESC, ENG DE MATERIAIS
Assuntos: BAIXA TEMPERATURA, DESGASTE DOS MATERIAIS, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Frederico Augusto Pires et al. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel. International Heat Treatment and Surface Engineering, v. 6, n. 1, p. 24-27, 2012Tradução . . Disponível em: https://doi.org/10.1179/1749514811Z.0000000008. Acesso em: 16 nov. 2024.
APA
Fernandes, F. A. P., Totten, G. E., Gallego, J., & Casteletti, L. C. (2012). Plasma nitriding and nitrocarburising of a supermartensitic stainless steel. International Heat Treatment and Surface Engineering, 6( 1), 24-27. doi:10.1179/1749514811Z.0000000008
NLM
Fernandes FAP, Totten GE, Gallego J, Casteletti LC. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel [Internet]. International Heat Treatment and Surface Engineering. 2012 ; 6( 1): 24-27.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1179/1749514811Z.0000000008
Vancouver
Fernandes FAP, Totten GE, Gallego J, Casteletti LC. Plasma nitriding and nitrocarburising of a supermartensitic stainless steel [Internet]. International Heat Treatment and Surface Engineering. 2012 ; 6( 1): 24-27.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1179/1749514811Z.0000000008
Artigo de periodico
Influence of alloying elements Cu, Ni and Mo on mechanical properties and austemperability of austempered ductile iron (2011)
Mattar, A. R.; Heck, Stênio Cristaldo; Lombardi Neto, Amadeu ; Fernandes, Frederico Augusto Pires ; Totten, George Edward ; Casteletti, Luiz Carlos
Fonte: International Heat Treatment and Surface Engineering. Unidades: EESC, ENG DE MATERIAIS
Assuntos: AUSTÊMPERA, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MATTAR, A. R. et al. Influence of alloying elements Cu, Ni and Mo on mechanical properties and austemperability of austempered ductile iron. International Heat Treatment and Surface Engineering, v. 5, n. 2, p. 78-82, 2011Tradução . . Disponível em: https://doi.org/10.1179/174951411X12956208225429. Acesso em: 16 nov. 2024.
APA
Mattar, A. R., Heck, S. C., Lombardi Neto, A., Fernandes, F. A. P., Totten, G. E., & Casteletti, L. C. (2011). Influence of alloying elements Cu, Ni and Mo on mechanical properties and austemperability of austempered ductile iron. International Heat Treatment and Surface Engineering, 5( 2), 78-82. doi:10.1179/174951411X12956208225429
NLM
Mattar AR, Heck SC, Lombardi Neto A, Fernandes FAP, Totten GE, Casteletti LC. Influence of alloying elements Cu, Ni and Mo on mechanical properties and austemperability of austempered ductile iron [Internet]. International Heat Treatment and Surface Engineering. 2011 ; 5( 2): 78-82.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1179/174951411X12956208225429
Vancouver
Mattar AR, Heck SC, Lombardi Neto A, Fernandes FAP, Totten GE, Casteletti LC. Influence of alloying elements Cu, Ni and Mo on mechanical properties and austemperability of austempered ductile iron [Internet]. International Heat Treatment and Surface Engineering. 2011 ; 5( 2): 78-82.[citado 2024 nov. 16 ] Available from: https://doi.org/10.1179/174951411X12956208225429

Unidades USP

ReP

Filtros

Autores

Autores USP

Assuntos

Afiliação dos autores externos não normalizada