ReP USP - Resultado da busca

Artigo de periodico
Capacitance, quality factor, and magnetic field influence on thermoformed magnetic-piezoelectret (2023)
Santos, Amélia Moreira; Moreira, Rui A.; Altafim, Ruy Alberto Pisani; Altafim, Ruy Alberto Corrêa
Fonte: IEEE Sensors Journal. Unidade: EESC
Assuntos: POLÍMEROS (MATERIAIS), ELETRETOS, PIEZOELETRICIDADE, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Amélia Moreira et al. Capacitance, quality factor, and magnetic field influence on thermoformed magnetic-piezoelectret. IEEE Sensors Journal, p. 1-7, 2023Tradução . . Disponível em: https://dx.doi.org/10.1109/JSEN.2024.3393234. Acesso em: 06 out. 2024.
APA
Santos, A. M., Moreira, R. A., Altafim, R. A. P., & Altafim, R. A. C. (2023). Capacitance, quality factor, and magnetic field influence on thermoformed magnetic-piezoelectret. IEEE Sensors Journal, 1-7. doi:10.1109/JSEN.2024.3393234
NLM
Santos AM, Moreira RA, Altafim RAP, Altafim RAC. Capacitance, quality factor, and magnetic field influence on thermoformed magnetic-piezoelectret [Internet]. IEEE Sensors Journal. 2023 ; 1-7.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1109/JSEN.2024.3393234
Vancouver
Santos AM, Moreira RA, Altafim RAP, Altafim RAC. Capacitance, quality factor, and magnetic field influence on thermoformed magnetic-piezoelectret [Internet]. IEEE Sensors Journal. 2023 ; 1-7.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1109/JSEN.2024.3393234
Artigo de periodico
Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors (2023)
Ruas, Erick Luiz Vieira; Lopes, Wenderson Nascimento; Aguiar, Paulo Roberto de; Lopes, Thiago Glissoi; Conceição Junior, Pedro de Oliveira
Fonte: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Assuntos: PIEZOELETRICIDADE, RETIFICAÇÃO, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUAS, Erick Luiz Vieira et al. Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors. International Journal of Advanced Manufacturing Technology, v. 127, p. 2759-2773, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11682-w. Acesso em: 06 out. 2024.
APA
Ruas, E. L. V., Lopes, W. N., Aguiar, P. R. de, Lopes, T. G., & Conceição Junior, P. de O. (2023). Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors. International Journal of Advanced Manufacturing Technology, 127, 2759-2773. doi:10.1007/s00170-023-11682-w
NLM
Ruas ELV, Lopes WN, Aguiar PR de, Lopes TG, Conceição Junior P de O. Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127 2759-2773.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s00170-023-11682-w
Vancouver
Ruas ELV, Lopes WN, Aguiar PR de, Lopes TG, Conceição Junior P de O. Monitoring the dressing operation of conventional aluminum oxide grinding wheels through damage index, power spectral density, and piezoelectric sensors [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127 2759-2773.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s00170-023-11682-w
Artigo de periodico
Design of tilting-pad journal bearings considering bearing clearance uncertainty and reliability analysis (2023)
Silva, Heitor Antonio Pereira da; Nicoletti, Rodrigo
Fonte: Journal of Tribology. Unidade: EESC
Assuntos: ROLAMENTOS, ANÁLISE ESTOCÁSTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Heitor Antonio Pereira da e NICOLETTI, Rodrigo. Design of tilting-pad journal bearings considering bearing clearance uncertainty and reliability analysis. Journal of Tribology, v. 141, n. 1, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1115/1.4041021. Acesso em: 06 out. 2024.
APA
Silva, H. A. P. da, & Nicoletti, R. (2023). Design of tilting-pad journal bearings considering bearing clearance uncertainty and reliability analysis. Journal of Tribology, 141( 1), 1-11. doi:10.1115/1.4041021
NLM
Silva HAP da, Nicoletti R. Design of tilting-pad journal bearings considering bearing clearance uncertainty and reliability analysis [Internet]. Journal of Tribology. 2023 ; 141( 1): 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1115/1.4041021
Vancouver
Silva HAP da, Nicoletti R. Design of tilting-pad journal bearings considering bearing clearance uncertainty and reliability analysis [Internet]. Journal of Tribology. 2023 ; 141( 1): 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1115/1.4041021
Artigo de periodico
A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition (2023)
Ribeiro, Kandice Suane Barros ; Nuñez, Henrique Hiram Libutti; Venter, Giuliana Sardi ; Doude, Haley R ; Coelho, Reginaldo Teixeira
Fonte: International Journal of Advanced Manufacturing Technology. Unidades: EESC, ICMC
Assuntos: MANUFATURA ADITIVA, PROCESSAMENTO DE IMAGENS, REDES NEURAIS, APRENDIZADO COMPUTACIONAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIBEIRO, Kandice Suane Barros et al. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, v. 127, n. 7-8, p. 3183-3194, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11582-z. Acesso em: 06 out. 2024.
APA
Ribeiro, K. S. B., Nuñez, H. H. L., Venter, G. S., Doude, H. R., & Coelho, R. T. (2023). A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition. International Journal of Advanced Manufacturing Technology, 127( 7-8), 3183-3194. doi:10.1007/s00170-023-11582-z
NLM
Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
Vancouver
Ribeiro KSB, Nuñez HHL, Venter GS, Doude HR, Coelho RT. A hybrid machine learning model for in-process estimation of printing distance in laser Directed Energy Deposition [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 127( 7-8): 3183-3194.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s00170-023-11582-z
Artigo de periodico
Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm (2023)
Moraes, Matheus Henrique Morato de ; Fraga, Iuri Fazolin; Menezes, Isabella Silva ; Lahr, Francisco Antonio Rocco ; Panzera, Túlio Hallak ; Freire, Rodrigo Teixeira Santos; Dias, Alfredo Manuel Pereira Geraldes ; Santos, Herisson Ferreira dos; Faustino, Emerson; Pereira Junior, Wanderlei Malaquias; Christoforo, André Luis
Fonte: Buildings. Unidade: EESC
Assuntos: TRELIÇAS, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAES, Matheus Henrique Morato de et al. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, v. 13, n. 8, p. 1-36, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13081946. Acesso em: 06 out. 2024.
APA
Moraes, M. H. M. de, Fraga, I. F., Menezes, I. S., Lahr, F. A. R., Panzera, T. H., Freire, R. T. S., et al. (2023). Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm. Buildings, 13( 8), 1-36. doi:10.3390/buildings13081946
NLM
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13081946
Vancouver
Moraes MHM de, Fraga IF, Menezes IS, Lahr FAR, Panzera TH, Freire RTS, Dias AMPG, Santos HF dos, Faustino E, Pereira Junior WM, Christoforo AL. Comparative analysis of the mechanical performance of timber flat truss typologies for different strength classes via optimization algorithm [Internet]. Buildings. 2023 ; 13( 8): 1-36.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13081946
Artigo de periodico
Performance-based design of pseudo-sliding mode speed control for electrical motor drives (2023)
Lumertz, Mateus Moro; Santos, Stefan Thiago Cury Alves dos; Guazzelli, Paulo Roberto Ubaldo; Oliveira, Carlos M. R.; Aguiar, Manoel Luis de ; Monteiro, José Roberto Boffino de Almeida
Fonte: Control Engineering Practice. Unidade: EESC
Assuntos: ENGENHARIA ELÉTRICA, MOTORES ELÉTRICOS, SISTEMAS DINÂMICOS, SISTEMAS DE CONTROLE, MÁQUINAS ELÉTRICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LUMERTZ, Mateus Moro et al. Performance-based design of pseudo-sliding mode speed control for electrical motor drives. Control Engineering Practice, v. 132, p. 1-8, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.conengprac.2022.105413. Acesso em: 06 out. 2024.
APA
Lumertz, M. M., Santos, S. T. C. A. dos, Guazzelli, P. R. U., Oliveira, C. M. R., Aguiar, M. L. de, & Monteiro, J. R. B. de A. (2023). Performance-based design of pseudo-sliding mode speed control for electrical motor drives. Control Engineering Practice, 132, 1-8. doi:10.1016/j.conengprac.2022.105413
NLM
Lumertz MM, Santos STCA dos, Guazzelli PRU, Oliveira CMR, Aguiar ML de, Monteiro JRB de A. Performance-based design of pseudo-sliding mode speed control for electrical motor drives [Internet]. Control Engineering Practice. 2023 ; 132 1-8.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105413
Vancouver
Lumertz MM, Santos STCA dos, Guazzelli PRU, Oliveira CMR, Aguiar ML de, Monteiro JRB de A. Performance-based design of pseudo-sliding mode speed control for electrical motor drives [Internet]. Control Engineering Practice. 2023 ; 132 1-8.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105413
Artigo de periodico
Angular reference problem for three-phase distribution system state estimation (2023)
Melo, Vitor Henrique Pereira de; Massignan, Julio Augusto Druzina; London Junior, João Bosco Augusto
Fonte: IEEE Transactions on Power Systems. Unidade: EESC
Assuntos: DISTRIBUIÇÃO DE ENERGIA ELÉTRICA, DISTRIBUIÇÃO DE ENERGIA ELÉTRICA, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MELO, Vitor Henrique Pereira de e MASSIGNAN, Julio Augusto Druzina e LONDON JUNIOR, João Bosco Augusto. Angular reference problem for three-phase distribution system state estimation. IEEE Transactions on Power Systems, p. 1-11, 2023Tradução . . Disponível em: http://dx.doi.org/10.1109/TPWRS.2023.3321700. Acesso em: 06 out. 2024.
APA
Melo, V. H. P. de, Massignan, J. A. D., & London Junior, J. B. A. (2023). Angular reference problem for three-phase distribution system state estimation. IEEE Transactions on Power Systems, 1-11. doi:10.1109/TPWRS.2023.3321700
NLM
Melo VHP de, Massignan JAD, London Junior JBA. Angular reference problem for three-phase distribution system state estimation [Internet]. IEEE Transactions on Power Systems. 2023 ; 1-11.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1109/TPWRS.2023.3321700
Vancouver
Melo VHP de, Massignan JAD, London Junior JBA. Angular reference problem for three-phase distribution system state estimation [Internet]. IEEE Transactions on Power Systems. 2023 ; 1-11.[citado 2024 out. 06 ] Available from: http://dx.doi.org/10.1109/TPWRS.2023.3321700
Artigo de periodico
Effect of gravity on phase transition for liquid–gas simulations (2023)
Czelusniak, Luiz Eduardo ; Cabezas Gómez, Luben ; Wagner, Alexander J
Fonte: Physics of Fluids. Unidade: EESC
Assuntos: ESCOAMENTO BIFÁSICO, TRANSFERÊNCIA DE CALOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CZELUSNIAK, Luiz Eduardo e CABEZAS GÓMEZ, Luben e WAGNER, Alexander J. Effect of gravity on phase transition for liquid–gas simulations. Physics of Fluids, v. 35, p. 1-15, 2023Tradução . . Disponível em: https://doi.org/10.1063/5.0144470. Acesso em: 06 out. 2024.
APA
Czelusniak, L. E., Cabezas Gómez, L., & Wagner, A. J. (2023). Effect of gravity on phase transition for liquid–gas simulations. Physics of Fluids, 35, 1-15. doi:10.1063/5.0144470
NLM
Czelusniak LE, Cabezas Gómez L, Wagner AJ. Effect of gravity on phase transition for liquid–gas simulations [Internet]. Physics of Fluids. 2023 ; 35 1-15.[citado 2024 out. 06 ] Available from: https://doi.org/10.1063/5.0144470
Vancouver
Czelusniak LE, Cabezas Gómez L, Wagner AJ. Effect of gravity on phase transition for liquid–gas simulations [Internet]. Physics of Fluids. 2023 ; 35 1-15.[citado 2024 out. 06 ] Available from: https://doi.org/10.1063/5.0144470
Artigo de periodico
Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment (2023)
Marcomini, José Benedito; Santos, Elielson Alves dos; Sordi, Vitor Luiz; Giorgetti, Vinicius; Rovere, Carlos Alberto Della; Baptista, Carlos Antonio Reis Pereira; Paes, Marcelo
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Assuntos: ETANOL, COMBUSTÍVEIS, FADIGA DOS MATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOMINI, José Benedito et al. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-12, 2023Tradução . . Disponível em: https://dx.doi.org/10.1007/s40430-023-04540-z. Acesso em: 06 out. 2024.
APA
Marcomini, J. B., Santos, E. A. dos, Sordi, V. L., Giorgetti, V., Rovere, C. A. D., Baptista, C. A. R. P., & Paes, M. (2023). Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-12. doi:10.1007/s40430-023-04540-z
NLM
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Vancouver
Marcomini JB, Santos EA dos, Sordi VL, Giorgetti V, Rovere CAD, Baptista CARP, Paes M. Fatigue crack propagation of API 5L X70 steel in a modifed simulated fuel-grade ethanol (MSFGE) environment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-12.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1007/s40430-023-04540-z
Artigo de periodico
Simple-Z: a low-cost portable impedance analyzer (2023)
Buscaglia, Lorenzo Antonio ; Carmo, João Paulo Pereira do ; Oliveira Junior, Osvaldo Novais de
Fonte: IEEE Sensors Journal. Unidades: EESC, IFSC
Assuntos: PROCESSAMENTO DE SINAIS, SENSOR, IMPEDÂNCIA ELÉTRICA, ENGENHARIA ELÉTRICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BUSCAGLIA, Lorenzo Antonio e CARMO, João Paulo Pereira do e OLIVEIRA JUNIOR, Osvaldo Novais de. Simple-Z: a low-cost portable impedance analyzer. IEEE Sensors Journal, v. No 2023, n. 21, p. 26067-26074, 2023Tradução . . Disponível em: https://dx.doi.org/10.1109/JSEN.2023.3312039. Acesso em: 06 out. 2024.
APA
Buscaglia, L. A., Carmo, J. P. P. do, & Oliveira Junior, O. N. de. (2023). Simple-Z: a low-cost portable impedance analyzer. IEEE Sensors Journal, No 2023( 21), 26067-26074. doi:10.1109/JSEN.2023.3312039
NLM
Buscaglia LA, Carmo JPP do, Oliveira Junior ON de. Simple-Z: a low-cost portable impedance analyzer [Internet]. IEEE Sensors Journal. 2023 ; No 2023( 21): 26067-26074.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1109/JSEN.2023.3312039
Vancouver
Buscaglia LA, Carmo JPP do, Oliveira Junior ON de. Simple-Z: a low-cost portable impedance analyzer [Internet]. IEEE Sensors Journal. 2023 ; No 2023( 21): 26067-26074.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.1109/JSEN.2023.3312039
Artigo de periodico
Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models (2023)
Neuberger, Ygor Moriel; Andrade, Maykon Vinicius; Sousa, Alex Micael Dantas de ; Bandieira, Mariana; Silva Junior, Edivaldo Pereira; Santos, Herisson Ferreira dos; Catoia, Bruna; Bolandim, Emerson Alexandro; Aquino, Vinicius Borges de Moura; Christoforo, André Luis ; Ferreira, Marcelo de Araújo
Fonte: Buildings. Unidade: EESC
Assuntos: ANÁLISE NUMÉRICA, CONCRETO ARMADO, PLASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NEUBERGER, Ygor Moriel et al. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models. Buildings, v. 13, n. 11, p. 1-21, 2023Tradução . . Disponível em: https://dx.doi.org/10.3390/buildings1311278120. Acesso em: 06 out. 2024.
APA
Neuberger, Y. M., Andrade, M. V., Sousa, A. M. D. de, Bandieira, M., Silva Junior, E. P., Santos, H. F. dos, et al. (2023). Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models. Buildings, 13( 11), 1-21. doi:10.3390/buildings13112781
NLM
Neuberger YM, Andrade MV, Sousa AMD de, Bandieira M, Silva Junior EP, Santos HF dos, Catoia B, Bolandim EA, Aquino VB de M, Christoforo AL, Ferreira M de A. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models [Internet]. Buildings. 2023 ; 13( 11): 1-21.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.3390/buildings1311278120
Vancouver
Neuberger YM, Andrade MV, Sousa AMD de, Bandieira M, Silva Junior EP, Santos HF dos, Catoia B, Bolandim EA, Aquino VB de M, Christoforo AL, Ferreira M de A. Numerical analysis of reinforced concrete corbels using concrete damage plasticity: sensitivity to material parameters and comparison with analytical models [Internet]. Buildings. 2023 ; 13( 11): 1-21.[citado 2024 out. 06 ] Available from: https://dx.doi.org/10.3390/buildings1311278120
Artigo de periodico
Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel (2023)
Ruy, Marcos César; Bose Filho, Waldek Wladimir ; Doel, T. J. A.; Ruchert, Cassius Olívio Figueiredo Terra
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidades: EESC, EEL
Assuntos: TRATAMENTO DE SUPERFÍCIES, FADIGA DOS MATERIAIS, TENSÃO RESIDUAL, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RUY, Marcos César et al. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04404-6. Acesso em: 06 out. 2024.
APA
Ruy, M. C., Bose Filho, W. W., Doel, T. J. A., & Ruchert, C. O. F. T. (2023). Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-11. doi:10.1007/s40430-023-04404-6
NLM
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Vancouver
Ruy MC, Bose Filho WW, Doel TJA, Ruchert COFT. Study of surface warm shot peening on the fatigue life of a SAE 5160 leaf spring steel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04404-6
Artigo de periodico
Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern (2023)
Paladini, Andre Luis Aguiar; Rodrigues, Andre L. G.; Bidinotto, Jorge Henrique ; Franco, Vitor Ramos
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: VIBRAÇÕES, AEROELASTICIDADE DE AERONAVES, GEOMETRIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PALADINI, Andre Luis Aguiar et al. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-16, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04255-1. Acesso em: 06 out. 2024.
APA
Paladini, A. L. A., Rodrigues, A. L. G., Bidinotto, J. H., & Franco, V. R. (2023). Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-16. doi:10.1007/s40430-023-04255-1
NLM
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Vancouver
Paladini ALA, Rodrigues ALG, Bidinotto JH, Franco VR. Control of airfow induced vibrations on a cantilever beam by actuating on the exposure of its machined surface notch pattern [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-16.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04255-1
Artigo de periodico
Evaluation of diferent protection systems to control the geomembrane deformations in liner applications (2023)
Pedroso, Gabriel Orquizas Mattielo ; Silva, Jefferson Lins da
Fonte: International Journal of Geosynthetics and Ground Engineering. Unidade: EESC
Assuntos: GEOMEMBRANAS, REJEITOS DE MINERAÇÃO, DEFORMAÇÃO ESTRUTURAL, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEDROSO, Gabriel Orquizas Mattielo e SILVA, Jefferson Lins da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications. International Journal of Geosynthetics and Ground Engineering, v. 9, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40891-023-00455-w. Acesso em: 06 out. 2024.
APA
Pedroso, G. O. M., & Silva, J. L. da. (2023). Evaluation of diferent protection systems to control the geomembrane deformations in liner applications. International Journal of Geosynthetics and Ground Engineering, 9, 1-11. doi:10.1007/s40891-023-00455-w
NLM
Pedroso GOM, Silva JL da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications [Internet]. International Journal of Geosynthetics and Ground Engineering. 2023 ; 9 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40891-023-00455-w
Vancouver
Pedroso GOM, Silva JL da. Evaluation of diferent protection systems to control the geomembrane deformations in liner applications [Internet]. International Journal of Geosynthetics and Ground Engineering. 2023 ; 9 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40891-023-00455-w
Artigo de periodico
Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling (2023)
Amaral, Ana Carolina Godoy; De Marqui Júnior, Carlos ; Silveira, Marcos
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assuntos: MOBILIDADE URBANA, PANDEMIAS, COVID-19, SISTEMAS DINÂMICOS, AEROELASTICIDADE DE AERONAVES, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMARAL, Ana Carolina Godoy e DE MARQUI JÚNIOR, Carlos e SILVEIRA, Marcos. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03783-6. Acesso em: 06 out. 2024.
APA
Amaral, A. C. G., De Marqui Júnior, C., & Silveira, M. (2023). Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-14. doi:10.1007/s40430-022-03783-6
NLM
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Vancouver
Amaral ACG, De Marqui Júnior C, Silveira M. Aeroelastic energy harvesting in futter condition increases with combined nonlinear stifness and nonlinear piezoelectrical coupling [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-14.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-022-03783-6
Artigo de periodico
Control of drill string torsional vibrations using optimal static output feedback (2023)
Cruz Neto, Hélio Jacinto da; Trindade, Marcelo Areias
Fonte: Control Engineering Practice. Unidade: EESC
Assuntos: VIBRAÇÕES, PETRÓLEO, PERFURAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CRUZ NETO, Hélio Jacinto da e TRINDADE, Marcelo Areias. Control of drill string torsional vibrations using optimal static output feedback. Control Engineering Practice, v. 130, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.conengprac.2022.105366. Acesso em: 06 out. 2024.
APA
Cruz Neto, H. J. da, & Trindade, M. A. (2023). Control of drill string torsional vibrations using optimal static output feedback. Control Engineering Practice, 130, 1-11. doi:10.1016/j.conengprac.2022.105366
NLM
Cruz Neto HJ da, Trindade MA. Control of drill string torsional vibrations using optimal static output feedback [Internet]. Control Engineering Practice. 2023 ; 130 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105366
Vancouver
Cruz Neto HJ da, Trindade MA. Control of drill string torsional vibrations using optimal static output feedback [Internet]. Control Engineering Practice. 2023 ; 130 1-11.[citado 2024 out. 06 ] Available from: https://doi.org/10.1016/j.conengprac.2022.105366
Artigo de periodico
Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control (2023)
Shigueoka, Augusto H.; Trindade, Marcelo Areias
Fonte: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SHIGUEOKA, Augusto H. e TRINDADE, Marcelo Areias. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 45, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1007/s40430-023-04071-7. Acesso em: 06 out. 2024.
APA
Shigueoka, A. H., & Trindade, M. A. (2023). Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45, 1-18. doi:10.1007/s40430-023-04071-7
NLM
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Vancouver
Shigueoka AH, Trindade MA. Closed‑loop optimization of piezoelectric sensors locations and gains for output feedback active vibration control [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2023 ; 45 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1007/s40430-023-04071-7
Artigo de periodico
A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis (2023)
Felix, Emerson Felipe; Falcão, Isabela da Silva; Santos, Larissa Gabriela dos; Carrazedo, Rogério ; Possan, Edna
Fonte: Buildings. Unidade: EESC
Assuntos: MÉTODO DE MONTE CARLO, ESTRUTURAS DE CONCRETO ARMADO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELIX, Emerson Felipe et al. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis. Buildings, v. 13, n. 4, p. 1-21, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13040993. Acesso em: 06 out. 2024.
APA
Felix, E. F., Falcão, I. da S., Santos, L. G. dos, Carrazedo, R., & Possan, E. (2023). A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis. Buildings, 13( 4), 1-21. doi:10.3390/buildings13040993
NLM
Felix EF, Falcão I da S, Santos LG dos, Carrazedo R, Possan E. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis [Internet]. Buildings. 2023 ; 13( 4): 1-21.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13040993
Vancouver
Felix EF, Falcão I da S, Santos LG dos, Carrazedo R, Possan E. A Monte Carlo-based approach to assess the reinforcement depassivation probability of RC structures: simulation and analysis [Internet]. Buildings. 2023 ; 13( 4): 1-21.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13040993
Artigo de periodico
Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms (2023)
Sousa, Alex Micael Dantas de ; Lantsoght, Eva Olivia Leontien; El Debs, Mounir Khalil
Fonte: Buildings. Unidade: EESC
Assuntos: ESTRUTURAS, CISALHAMENTO, LAJES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA, Alex Micael Dantas de e LANTSOGHT, Eva Olivia Leontien e EL DEBS, Mounir Khalil. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms. Buildings, v. 13, n. 2, p. 1-28, 2023Tradução . . Disponível em: https://doi.org/10.3390/buildings13020434. Acesso em: 06 out. 2024.
APA
Sousa, A. M. D. de, Lantsoght, E. O. L., & El Debs, M. K. (2023). Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms. Buildings, 13( 2), 1-28. doi:10.3390/buildings13020434
NLM
Sousa AMD de, Lantsoght EOL, El Debs MK. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms [Internet]. Buildings. 2023 ; 13( 2): 1-28.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13020434
Vancouver
Sousa AMD de, Lantsoght EOL, El Debs MK. Shear and punching capacity predictions for one-way slabs under concentrated loads considering the transition between failure mechanisms [Internet]. Buildings. 2023 ; 13( 2): 1-28.[citado 2024 out. 06 ] Available from: https://doi.org/10.3390/buildings13020434
Artigo de periodico
Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis (2023)
Possenti, Kleison Antonio; Menezes, Vanessa Guimaraes Soares de; Vandepitte, Dirk; Tita, Volnei ; Medeiros, Ricardo de
Fonte: Mechanics of Advanced Materials and Structures. Unidade: EESC
Assuntos: TECNOLOGIA MECÂNICA, MATERIAIS COMPÓSITOS DE FIBRAS, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
POSSENTI, Kleison Antonio et al. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis. Mechanics of Advanced Materials and Structures, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.1080/15376494.2023.2245816. Acesso em: 06 out. 2024.
APA
Possenti, K. A., Menezes, V. G. S. de, Vandepitte, D., Tita, V., & Medeiros, R. de. (2023). Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis. Mechanics of Advanced Materials and Structures, 1-18. doi:10.1080/15376494.2023.2245816
NLM
Possenti KA, Menezes VGS de, Vandepitte D, Tita V, Medeiros R de. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis [Internet]. Mechanics of Advanced Materials and Structures. 2023 ; 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2023.2245816
Vancouver
Possenti KA, Menezes VGS de, Vandepitte D, Tita V, Medeiros R de. Detection of changes in dynamic characteristics of composite structures using Kriging metamodeling procedure: Experimental and computational analysis [Internet]. Mechanics of Advanced Materials and Structures. 2023 ; 1-18.[citado 2024 out. 06 ] Available from: https://doi.org/10.1080/15376494.2023.2245816

Unidades USP

ReP

Filtros

Departamento

Autores

Autores USP

Assuntos

Título da fonte

Editora

Agência de fomento

Indexado em

Afiliação dos autores externos não normalizada

País das instituições de afiliação dos autores externos