ReP USP - Resultado da busca

Artigo de periodico
Tannin: an eco-friendly depressant for the green flotation separation of hematite from quartz (2021)
Tohry, Arash; Dehghan, Reza; Leal Filho, Laurindo de Salles ; Chelgani, Saeed Chehreh
Source: Minerals Engineering. Unidade: EP
Subjects: TANINO, HEMATITA, QUARTZO, QUÍMICA DE SUPERFÍCIE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TOHRY, Arash et al. Tannin: an eco-friendly depressant for the green flotation separation of hematite from quartz. Minerals Engineering, v. 168, p. 1-11, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2021.106917. Acesso em: 11 ago. 2024.
APA
Tohry, A., Dehghan, R., Leal Filho, L. de S., & Chelgani, S. C. (2021). Tannin: an eco-friendly depressant for the green flotation separation of hematite from quartz. Minerals Engineering, 168, 1-11. doi:10.1016/j.mineng.2021.106917
NLM
Tohry A, Dehghan R, Leal Filho L de S, Chelgani SC. Tannin: an eco-friendly depressant for the green flotation separation of hematite from quartz [Internet]. Minerals Engineering. 2021 ; 168 1-11.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.106917
Vancouver
Tohry A, Dehghan R, Leal Filho L de S, Chelgani SC. Tannin: an eco-friendly depressant for the green flotation separation of hematite from quartz [Internet]. Minerals Engineering. 2021 ; 168 1-11.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.106917
Artigo de periodico
New perspectives in iron ore flotation: use of collector reagents without depressants in reverse cationic flotation of quartz (2021)
Silva, Klaydison; Filippov, Lev O; Piçarra, Alexandre; Flilippova, Inna V; Lima, Neymayer Pereira; Skliar, Anna; Faustino, Livia Marques; Leal Filho, Laurindo de Salles
Source: Minerals Engineering. Unidade: EP
Subjects: FLOTAÇÃO DE MINÉRIOS, REAGENTES, FERRO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Klaydison et al. New perspectives in iron ore flotation: use of collector reagents without depressants in reverse cationic flotation of quartz. Minerals Engineering, v. 170, p. 1-21, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2021.107004. Acesso em: 11 ago. 2024.
APA
Silva, K., Filippov, L. O., Piçarra, A., Flilippova, I. V., Lima, N. P., Skliar, A., et al. (2021). New perspectives in iron ore flotation: use of collector reagents without depressants in reverse cationic flotation of quartz. Minerals Engineering, 170, 1-21. doi:10.1016/j.mineng.2021.107004
NLM
Silva K, Filippov LO, Piçarra A, Flilippova IV, Lima NP, Skliar A, Faustino LM, Leal Filho L de S. New perspectives in iron ore flotation: use of collector reagents without depressants in reverse cationic flotation of quartz [Internet]. Minerals Engineering. 2021 ; 170 1-21.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.107004
Vancouver
Silva K, Filippov LO, Piçarra A, Flilippova IV, Lima NP, Skliar A, Faustino LM, Leal Filho L de S. New perspectives in iron ore flotation: use of collector reagents without depressants in reverse cationic flotation of quartz [Internet]. Minerals Engineering. 2021 ; 170 1-21.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.107004
Artigo de periodico
Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills (2021)
Rodrigues, Armando Fernandes da Veiga; Delboni Júnior, Homero ; Powell, Malcolm S; Tavares, Luis Marcelo Marques
Source: Minerals Engineering. Unidade: EP
Subjects: MOAGEM, FERRO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Armando Fernandes da Veiga et al. Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills. Minerals Engineering, v. 163, p. 1-8, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2021.106780. Acesso em: 11 ago. 2024.
APA
Rodrigues, A. F. da V., Delboni Júnior, H., Powell, M. S., & Tavares, L. M. M. (2021). Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills. Minerals Engineering, 163, 1-8. doi:10.1016/j.mineng.2021.106780
NLM
Rodrigues AF da V, Delboni Júnior H, Powell MS, Tavares LMM. Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills [Internet]. Minerals Engineering. 2021 ; 163 1-8.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.106780
Vancouver
Rodrigues AF da V, Delboni Júnior H, Powell MS, Tavares LMM. Comparing strategies for grinding itabirite iron ores in autogenous and semi-autogenous pilot-scale mills [Internet]. Minerals Engineering. 2021 ; 163 1-8.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2021.106780
Artigo de periodico
Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant (2021)
Calderon-Hernández, José Wilmar ; Alves Junior, Sandro Francisco; Moraes, Flavio Pereira de; Melo, Hercílio Gomes de ; Padilha, Angelo Fernando
Source: Materials and Corrosion. Unidade: EP
Subjects: CORROSÃO, AÇO, TECNOLOGIA PETROQUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant. Materials and Corrosion, p. 1-12, 2021Tradução . . Disponível em: https://doi.org/10.1002/maco.202112517. Acesso em: 11 ago. 2024.
APA
Calderon-Hernández, J. W., Alves Junior, S. F., Moraes, F. P. de, Melo, H. G. de, & Padilha, A. F. (2021). Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant. Materials and Corrosion, 1-12. doi:10.1002/maco.202112517
NLM
Calderon-Hernández JW, Alves Junior SF, Moraes FP de, Melo HG de, Padilha AF. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant [Internet]. Materials and Corrosion. 2021 ;1-12.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1002/maco.202112517
Vancouver
Calderon-Hernández JW, Alves Junior SF, Moraes FP de, Melo HG de, Padilha AF. Correlation between microstructure and corrosion behavior in an AISI 316L steel pipeline exposed for 100,700 h at 640°C in a petrochemical plant [Internet]. Materials and Corrosion. 2021 ;1-12.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1002/maco.202112517
Artigo de periodico
Investigation of the reverse flotation of iron ore in three different flotation cells: Mechanical, oscillating grid and pneumatic (2020)
Safari, Mehdi; Hoseinian, F S; Deglon, David A; Leal Filho, Laurindo de Salles ; Pinto, Thiago César de Souza
Source: Minerals Engineering. Unidade: EP
Subjects: FLOTAÇÃO DE MINÉRIOS, AGITAÇÃO DE LÍQUIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAFARI, Mehdi et al. Investigation of the reverse flotation of iron ore in three different flotation cells: Mechanical, oscillating grid and pneumatic. Minerals Engineering, v. 150, p. 1-7, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2020.106283. Acesso em: 11 ago. 2024.
APA
Safari, M., Hoseinian, F. S., Deglon, D. A., Leal Filho, L. de S., & Pinto, T. C. de S. (2020). Investigation of the reverse flotation of iron ore in three different flotation cells: Mechanical, oscillating grid and pneumatic. Minerals Engineering, 150, 1-7. doi:10.1016/j.mineng.2020.106283
NLM
Safari M, Hoseinian FS, Deglon DA, Leal Filho L de S, Pinto TC de S. Investigation of the reverse flotation of iron ore in three different flotation cells: Mechanical, oscillating grid and pneumatic [Internet]. Minerals Engineering. 2020 ; 150 1-7.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2020.106283
Vancouver
Safari M, Hoseinian FS, Deglon DA, Leal Filho L de S, Pinto TC de S. Investigation of the reverse flotation of iron ore in three different flotation cells: Mechanical, oscillating grid and pneumatic [Internet]. Minerals Engineering. 2020 ; 150 1-7.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2020.106283
Artigo de periodico
Bulk ore sorting cut-off estimation methodology: Phu Kham Mine case study (2020)
Reple, Alexandre Cardoso da Silveira; Chieregati, Ana Carolina ; Valery Junior, Walter; Prati, Fabio Jose
Source: Minerals Engineering. Unidade: EP
Subjects: CONCENTRAÇÃO DE MINERAIS, COBRE, GEOESTATÍSTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REPLE, Alexandre Cardoso da Silveira et al. Bulk ore sorting cut-off estimation methodology: Phu Kham Mine case study. Minerals Engineering, v. 149, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2018.08.006. Acesso em: 11 ago. 2024.
APA
Reple, A. C. da S., Chieregati, A. C., Valery Junior, W., & Prati, F. J. (2020). Bulk ore sorting cut-off estimation methodology: Phu Kham Mine case study. Minerals Engineering, 149. doi:10.1016/j.mineng.2018.08.006
NLM
Reple AC da S, Chieregati AC, Valery Junior W, Prati FJ. Bulk ore sorting cut-off estimation methodology: Phu Kham Mine case study [Internet]. Minerals Engineering. 2020 ; 149[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.08.006
Vancouver
Reple AC da S, Chieregati AC, Valery Junior W, Prati FJ. Bulk ore sorting cut-off estimation methodology: Phu Kham Mine case study [Internet]. Minerals Engineering. 2020 ; 149[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.08.006
Artigo de periodico
The Tichauer-De Tomi matrix: a tool for assessment of geological uncertainty in small-scale mining (2019)
Tichauer, Ricardo Marcelo ; De Tomi, Giorgio Francesco Cesare
Source: Mining, Metallurgy & Exploration. Unidade: EP
Assunto: TÉCNICAS DE PESQUISA MINERAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TICHAUER, Ricardo Marcelo e DE TOMI, Giorgio Francesco Cesare. The Tichauer-De Tomi matrix: a tool for assessment of geological uncertainty in small-scale mining. Mining, Metallurgy & Exploration, v. 36, p. 579-588, 2019Tradução . . Disponível em: https://doi.org/10.1007/s42461-019-0052-z. Acesso em: 11 ago. 2024.
APA
Tichauer, R. M., & De Tomi, G. F. C. (2019). The Tichauer-De Tomi matrix: a tool for assessment of geological uncertainty in small-scale mining. Mining, Metallurgy & Exploration, 36, 579-588. doi:10.1007/s42461-019-0052-z
NLM
Tichauer RM, De Tomi GFC. The Tichauer-De Tomi matrix: a tool for assessment of geological uncertainty in small-scale mining [Internet]. Mining, Metallurgy & Exploration. 2019 ;36 579-588.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1007/s42461-019-0052-z
Vancouver
Tichauer RM, De Tomi GFC. The Tichauer-De Tomi matrix: a tool for assessment of geological uncertainty in small-scale mining [Internet]. Mining, Metallurgy & Exploration. 2019 ;36 579-588.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1007/s42461-019-0052-z
Artigo de periodico
Surface interaction of CO2/H2 mixture on mesoporous ZrO2: effect of crystalline polymorph phases (2019)
Marcos, Francielle Candian Firmino ; Assaf, Jose Mansur ; Giudici, Reinaldo ; Assaf, Elisabete Moreira
Source: Applied Surface Science. Unidades: IQSC, EP
Assunto: SURFACTANTES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARCOS, Francielle Candian Firmino et al. Surface interaction of CO2/H2 mixture on mesoporous ZrO2: effect of crystalline polymorph phases. Applied Surface Science, v. 484, p. 1128-1140, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.apsusc.2019.143671. Acesso em: 11 ago. 2024.
APA
Marcos, F. C. F., Assaf, J. M., Giudici, R., & Assaf, E. M. (2019). Surface interaction of CO2/H2 mixture on mesoporous ZrO2: effect of crystalline polymorph phases. Applied Surface Science, 484, 1128-1140. doi:10.1016/j.apsusc.2019.143671
NLM
Marcos FCF, Assaf JM, Giudici R, Assaf EM. Surface interaction of CO2/H2 mixture on mesoporous ZrO2: effect of crystalline polymorph phases [Internet]. Applied Surface Science. 2019 ;484 1128-1140.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.apsusc.2019.143671
Vancouver
Marcos FCF, Assaf JM, Giudici R, Assaf EM. Surface interaction of CO2/H2 mixture on mesoporous ZrO2: effect of crystalline polymorph phases [Internet]. Applied Surface Science. 2019 ;484 1128-1140.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.apsusc.2019.143671
Artigo de periodico
A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 2:: application to a gibbsitic bauxite from the Paragominas region, northern Brazil (2018)
Angélica, Rômulo Simões ; Kahn, Henrique ; Paz, Simone Patrícia Aranha da
Source: Minerals Engineering. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, BAUXITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANGÉLICA, Rômulo Simões e KAHN, Henrique e PAZ, Simone Patrícia Aranha da. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 2:: application to a gibbsitic bauxite from the Paragominas region, northern Brazil. Minerals Engineering, v. 118, p. 148-155, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2018.03.039. Acesso em: 11 ago. 2024.
APA
Angélica, R. S., Kahn, H., & Paz, S. P. A. da. (2018). A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 2:: application to a gibbsitic bauxite from the Paragominas region, northern Brazil. Minerals Engineering, 118, 148-155. doi:10.1016/j.mineng.2018.03.039
NLM
Angélica RS, Kahn H, Paz SPA da. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 2:: application to a gibbsitic bauxite from the Paragominas region, northern Brazil [Internet]. Minerals Engineering. 2018 ; 118 148-155.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.03.039
Vancouver
Angélica RS, Kahn H, Paz SPA da. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 2:: application to a gibbsitic bauxite from the Paragominas region, northern Brazil [Internet]. Minerals Engineering. 2018 ; 118 148-155.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.03.039
Artigo de periodico
A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 1:: hkl model developed for kaolinite (2018)
Paz, Simone Patrícia Aranha da; Kahn, Henrique ; Angélica, Rômulo Simões
Source: Minerals Engineering. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, BAUXITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAZ, Simone Patrícia Aranha da e KAHN, Henrique e ANGÉLICA, Rômulo Simões. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 1:: hkl model developed for kaolinite. Minerals Engineering, v. 118, p. 52-61, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2018.01.006. Acesso em: 11 ago. 2024.
APA
Paz, S. P. A. da, Kahn, H., & Angélica, R. S. (2018). A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 1:: hkl model developed for kaolinite. Minerals Engineering, 118, 52-61. doi:10.1016/j.mineng.2018.01.006
NLM
Paz SPA da, Kahn H, Angélica RS. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 1:: hkl model developed for kaolinite [Internet]. Minerals Engineering. 2018 ; 118 52-61.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.01.006
Vancouver
Paz SPA da, Kahn H, Angélica RS. A proposal for bauxite quality control using the combined Rietveld-Le Bail-Internal Standard PXRD method-Part 1:: hkl model developed for kaolinite [Internet]. Minerals Engineering. 2018 ; 118 52-61.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.01.006
Artigo de periodico
Analysis of key mixing parameters in industrial Wemco mechanical flotation cells (2018)
Pinto, Thiago César de Souza; Braga, André Soares; Leal Filho, Laurindo de Salles ; Deglon, David A
Source: Minerals Engineering. Unidade: EP
Subjects: FLOTAÇÃO DE MINÉRIOS, HIDRODINÂMICA, FLOTAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINTO, Thiago César de Souza et al. Analysis of key mixing parameters in industrial Wemco mechanical flotation cells. Minerals Engineering, v. 123, p. 167-172, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2018.03.046. Acesso em: 11 ago. 2024.
APA
Pinto, T. C. de S., Braga, A. S., Leal Filho, L. de S., & Deglon, D. A. (2018). Analysis of key mixing parameters in industrial Wemco mechanical flotation cells. Minerals Engineering, 123, 167-172. doi:10.1016/j.mineng.2018.03.046
NLM
Pinto TC de S, Braga AS, Leal Filho L de S, Deglon DA. Analysis of key mixing parameters in industrial Wemco mechanical flotation cells [Internet]. Minerals Engineering. 2018 ; 123 167-172.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.03.046
Vancouver
Pinto TC de S, Braga AS, Leal Filho L de S, Deglon DA. Analysis of key mixing parameters in industrial Wemco mechanical flotation cells [Internet]. Minerals Engineering. 2018 ; 123 167-172.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2018.03.046
Artigo de periodico
XPS study on the mechanism of starch-hematite surface chemical complexation (2017)
Moreira, Gabriela Fernandes; Peçanha, Elaynne Rohem; Monte, Marisa Bezerra de Mello; Leal Filho, Laurindo de Salles ; Stavale, Fernando
Source: Minerals Engineering. Unidade: EP
Subjects: FLOTAÇÃO DE MINÉRIOS, FERRO, REAGENTES, INDÚSTRIA MINERAL, QUÍMICA DE SUPERFÍCIE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MOREIRA, Gabriela Fernandes et al. XPS study on the mechanism of starch-hematite surface chemical complexation. Minerals Engineering, v. 110, p. 96-103, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2017.04.014. Acesso em: 11 ago. 2024.
APA
Moreira, G. F., Peçanha, E. R., Monte, M. B. de M., Leal Filho, L. de S., & Stavale, F. (2017). XPS study on the mechanism of starch-hematite surface chemical complexation. Minerals Engineering, 110, 96-103. doi:10.1016/j.mineng.2017.04.014
NLM
Moreira GF, Peçanha ER, Monte MB de M, Leal Filho L de S, Stavale F. XPS study on the mechanism of starch-hematite surface chemical complexation [Internet]. Minerals Engineering. 2017 ; 110 96-103.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2017.04.014
Vancouver
Moreira GF, Peçanha ER, Monte MB de M, Leal Filho L de S, Stavale F. XPS study on the mechanism of starch-hematite surface chemical complexation [Internet]. Minerals Engineering. 2017 ; 110 96-103.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2017.04.014
Artigo de periodico
Low temperature active screen plasma nitriding of 17-4 PH stainless steel (2016)
Pinedo, Carlos Eduardo ; Varela Larrota, Sharys Ivonn ; Nishikawa, Arthur Seiji ; Dong, Hanshan; Li, Xiao-Ying; Magnabosco, Rodrigo ; Tschiptschin, André Paulo
Source: Surface & Coatings Technology. Unidade: EP
Subjects: AÇO INOXIDÁVEL, MATERIAIS NANOESTRUTURADOS, MICROSCOPIA ELETRÔNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINEDO, Carlos Eduardo et al. Low temperature active screen plasma nitriding of 17-4 PH stainless steel. Surface & Coatings Technology, v. 308, p. 264-272, 2016Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2016.07.096. Acesso em: 11 ago. 2024.
APA
Pinedo, C. E., Varela Larrota, S. I., Nishikawa, A. S., Dong, H., Li, X. -Y., Magnabosco, R., & Tschiptschin, A. P. (2016). Low temperature active screen plasma nitriding of 17-4 PH stainless steel. Surface & Coatings Technology, 308, 264-272. doi:10.1016/j.surfcoat.2016.07.096
NLM
Pinedo CE, Varela Larrota SI, Nishikawa AS, Dong H, Li X-Y, Magnabosco R, Tschiptschin AP. Low temperature active screen plasma nitriding of 17-4 PH stainless steel [Internet]. Surface & Coatings Technology. 2016 ; 308 264-272.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.surfcoat.2016.07.096
Vancouver
Pinedo CE, Varela Larrota SI, Nishikawa AS, Dong H, Li X-Y, Magnabosco R, Tschiptschin AP. Low temperature active screen plasma nitriding of 17-4 PH stainless steel [Internet]. Surface & Coatings Technology. 2016 ; 308 264-272.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.surfcoat.2016.07.096
Artigo de periodico
Application of stepwise isothermal analysis method in the kinetic study of reduction of basic oxygen furnace dust (2015)
Junca, Eduardo ; Restivo, Thomaz Augusto Guisard ; Espinosa, Denise Crocce Romano ; Tenório, Jorge Alberto Soares
Source: Journal of Thermal Analysis and Calorimetry. Unidade: EP
Subjects: TERMOGRAVIMETRIA, CINÉTICA, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JUNCA, Eduardo et al. Application of stepwise isothermal analysis method in the kinetic study of reduction of basic oxygen furnace dust. Journal of Thermal Analysis and Calorimetry, p. 1913–1919, 2015Tradução . . Disponível em: https://doi.org/10.1007/s10973-015-4491-6. Acesso em: 11 ago. 2024.
APA
Junca, E., Restivo, T. A. G., Espinosa, D. C. R., & Tenório, J. A. S. (2015). Application of stepwise isothermal analysis method in the kinetic study of reduction of basic oxygen furnace dust. Journal of Thermal Analysis and Calorimetry, 1913–1919. doi:10.1007/s10973-015-4491-6
NLM
Junca E, Restivo TAG, Espinosa DCR, Tenório JAS. Application of stepwise isothermal analysis method in the kinetic study of reduction of basic oxygen furnace dust [Internet]. Journal of Thermal Analysis and Calorimetry. 2015 ; 1913–1919.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1007/s10973-015-4491-6
Vancouver
Junca E, Restivo TAG, Espinosa DCR, Tenório JAS. Application of stepwise isothermal analysis method in the kinetic study of reduction of basic oxygen furnace dust [Internet]. Journal of Thermal Analysis and Calorimetry. 2015 ; 1913–1919.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1007/s10973-015-4491-6
Artigo de periodico
Impact of quality of iron ore lumps on sustainability of mining operations in the Quadrilatero Ferrífero area (2015)
Gomes, Reinaldo Brandão; De Tomi, Giorgio Francesco Cesare ; Assis, Paulo Santos
Source: Minerals Engineering. Unidade: EP
Subjects: MINERAÇÃO DE MINERAIS METÁLICOS, FERRO, DESENVOLVIMENTO SUSTENTÁVEL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GOMES, Reinaldo Brandão e DE TOMI, Giorgio Francesco Cesare e ASSIS, Paulo Santos. Impact of quality of iron ore lumps on sustainability of mining operations in the Quadrilatero Ferrífero area. Minerals Engineering, v. 70, n. Ja 2015, p. 201-206, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.mineng.2014.09.019. Acesso em: 11 ago. 2024.
APA
Gomes, R. B., De Tomi, G. F. C., & Assis, P. S. (2015). Impact of quality of iron ore lumps on sustainability of mining operations in the Quadrilatero Ferrífero area. Minerals Engineering, 70( Ja 2015), 201-206. doi:10.1016/j.mineng.2014.09.019
NLM
Gomes RB, De Tomi GFC, Assis PS. Impact of quality of iron ore lumps on sustainability of mining operations in the Quadrilatero Ferrífero area [Internet]. Minerals Engineering. 2015 ; 70( Ja 2015): 201-206.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2014.09.019
Vancouver
Gomes RB, De Tomi GFC, Assis PS. Impact of quality of iron ore lumps on sustainability of mining operations in the Quadrilatero Ferrífero area [Internet]. Minerals Engineering. 2015 ; 70( Ja 2015): 201-206.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.mineng.2014.09.019
Artigo de periodico
Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: response surface methodology and direct optimization (2015)
Salviano, Leandro Oliveira; Dezan, Daniel Jonas; Yanagihara, Jurandir Itizo
Source: International Journal of Heat and Mass Transfer. Unidade: EP
Subjects: TRANSFERÊNCIA DE CALOR, ALGORITMOS GENÉTICOS, TERMODINÂMICA (OTIMIZAÇÃO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALVIANO, Leandro Oliveira e DEZAN, Daniel Jonas e YANAGIHARA, Jurandir Itizo. Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: response surface methodology and direct optimization. International Journal of Heat and Mass Transfer, v. 82, p. 373-387, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.072. Acesso em: 11 ago. 2024.
APA
Salviano, L. O., Dezan, D. J., & Yanagihara, J. I. (2015). Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: response surface methodology and direct optimization. International Journal of Heat and Mass Transfer, 82, 373-387. doi:10.1016/j.ijheatmasstransfer.2014.10.072
NLM
Salviano LO, Dezan DJ, Yanagihara JI. Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: response surface methodology and direct optimization [Internet]. International Journal of Heat and Mass Transfer. 2015 ;82 373-387.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.072
Vancouver
Salviano LO, Dezan DJ, Yanagihara JI. Optimization of winglet-type vortex generator positions and angles in plate-fin compact heat exchanger: response surface methodology and direct optimization [Internet]. International Journal of Heat and Mass Transfer. 2015 ;82 373-387.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.ijheatmasstransfer.2014.10.072
Artigo de periodico
Modelling the critical velocity for heterogeneous flow of mineral slurries (2014)
Pinto, Thiago César de Souza; Moraes Júnior, Deovaldo de; Slatter, Paul Thomas; Leal Filho, Laurindo de Salles
Source: International Journal of Multiphase Flow. Unidade: EP
Subjects: TRANSPORTE EM MINAS, TRANSPORTE DE MASSA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINTO, Thiago César de Souza et al. Modelling the critical velocity for heterogeneous flow of mineral slurries. International Journal of Multiphase Flow, v. 65, p. 31-37, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.ijmultiphaseflow.2014.05.013. Acesso em: 11 ago. 2024.
APA
Pinto, T. C. de S., Moraes Júnior, D. de, Slatter, P. T., & Leal Filho, L. de S. (2014). Modelling the critical velocity for heterogeneous flow of mineral slurries. International Journal of Multiphase Flow, 65, 31-37. doi:10.1016/j.ijmultiphaseflow.2014.05.013
NLM
Pinto TC de S, Moraes Júnior D de, Slatter PT, Leal Filho L de S. Modelling the critical velocity for heterogeneous flow of mineral slurries [Internet]. International Journal of Multiphase Flow. 2014 ;65 31-37.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.ijmultiphaseflow.2014.05.013
Vancouver
Pinto TC de S, Moraes Júnior D de, Slatter PT, Leal Filho L de S. Modelling the critical velocity for heterogeneous flow of mineral slurries [Internet]. International Journal of Multiphase Flow. 2014 ;65 31-37.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.ijmultiphaseflow.2014.05.013
Artigo de periodico
Design of costs-based metrics for enhancing the economics of the mining truck fleet (2014)
Martins, Max; Teixeira, Carlos; Nader, Beck; Nader, Alizeibek Saleimen; De Tomi, Giorgio Francesco Cesare
Source: Materials Science Forum. Unidade: EP
Subjects: MINERAÇÃO, OPERAÇÕES UNITÁRIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Max et al. Design of costs-based metrics for enhancing the economics of the mining truck fleet. Materials Science Forum, v. 805, p. 415-421, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/MSF.805.415. Acesso em: 11 ago. 2024.
APA
Martins, M., Teixeira, C., Nader, B., Nader, A. S., & De Tomi, G. F. C. (2014). Design of costs-based metrics for enhancing the economics of the mining truck fleet. Materials Science Forum, 805, 415-421. doi:10.4028/www.scientific.net/MSF.805.415
NLM
Martins M, Teixeira C, Nader B, Nader AS, De Tomi GFC. Design of costs-based metrics for enhancing the economics of the mining truck fleet [Internet]. Materials Science Forum. 2014 ;805 415-421.[citado 2024 ago. 11 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.805.415
Vancouver
Martins M, Teixeira C, Nader B, Nader AS, De Tomi GFC. Design of costs-based metrics for enhancing the economics of the mining truck fleet [Internet]. Materials Science Forum. 2014 ;805 415-421.[citado 2024 ago. 11 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.805.415
Artigo de periodico
An estimation of the artisanal small-scale production of gold in the world (2014)
Seccatore, Jacopo ; Veiga, Marcello Mariz da; Origliasso, Chiara; Marin, Tatiane; De Tomi, Giorgio Francesco Cesare
Source: Science of the Total Environment. Unidade: EP
Assunto: OURO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SECCATORE, Jacopo et al. An estimation of the artisanal small-scale production of gold in the world. Science of the Total Environment, v. 496, p. 662-667, 2014Tradução . . Disponível em: https://doi.org/10.1016/j.scitotenv.2014.05.003. Acesso em: 11 ago. 2024.
APA
Seccatore, J., Veiga, M. M. da, Origliasso, C., Marin, T., & De Tomi, G. F. C. (2014). An estimation of the artisanal small-scale production of gold in the world. Science of the Total Environment, 496, 662-667. doi:10.1016/j.scitotenv.2014.05.003
NLM
Seccatore J, Veiga MM da, Origliasso C, Marin T, De Tomi GFC. An estimation of the artisanal small-scale production of gold in the world [Internet]. Science of the Total Environment. 2014 ; 496 662-667.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.scitotenv.2014.05.003
Vancouver
Seccatore J, Veiga MM da, Origliasso C, Marin T, De Tomi GFC. An estimation of the artisanal small-scale production of gold in the world [Internet]. Science of the Total Environment. 2014 ; 496 662-667.[citado 2024 ago. 11 ] Available from: https://doi.org/10.1016/j.scitotenv.2014.05.003
Artigo de periodico
Challenges in the feasibility of bituminous shale as a source of oil (2014)
Passos, Alexandre Orlandi; Paulino, Jonas R; De Tomi, Giorgio Francesco Cesare
Source: Materials Science Forum. Unidade: EP
Subjects: XISTO, INDÚSTRIA MINERAL, PETRÓLEO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PASSOS, Alexandre Orlandi e PAULINO, Jonas R e DE TOMI, Giorgio Francesco Cesare. Challenges in the feasibility of bituminous shale as a source of oil. Materials Science Forum, v. 805, p. 442-447, 2014Tradução . . Disponível em: https://doi.org/10.4028/www.scientific.net/MSF.805.442. Acesso em: 11 ago. 2024.
APA
Passos, A. O., Paulino, J. R., & De Tomi, G. F. C. (2014). Challenges in the feasibility of bituminous shale as a source of oil. Materials Science Forum, 805, 442-447. doi:10.4028/www.scientific.net/MSF.805.442
NLM
Passos AO, Paulino JR, De Tomi GFC. Challenges in the feasibility of bituminous shale as a source of oil [Internet]. Materials Science Forum. 2014 ; 805 442-447.[citado 2024 ago. 11 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.805.442
Vancouver
Passos AO, Paulino JR, De Tomi GFC. Challenges in the feasibility of bituminous shale as a source of oil [Internet]. Materials Science Forum. 2014 ; 805 442-447.[citado 2024 ago. 11 ] Available from: https://doi.org/10.4028/www.scientific.net/MSF.805.442

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Countries/Territories

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration