ReP USP - Resultado da busca

Artigo de periodico
Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating (2023)
Pereira, Natália Fernanda Santos; Reis, Barbara Cristina Mendanha; Santos, Anderson Júnior dos ; Houmard, Manuel ; Câmara, Marcelo Araújo; Rodrigues, Alessandro Roger ; Rubio, Juan Carlos Campos
Source: International Journal of Advanced Manufacturing Technology. Unidade: EESC
Subjects: FILMES FINOS, REVESTIMENTOS, TRIBOLOGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Natália Fernanda Santos et al. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, p. 1-17, 2023Tradução . . Disponível em: https://doi.org/10.1007/s00170-023-11072-2. Acesso em: 10 set. 2024.
APA
Pereira, N. F. S., Reis, B. C. M., Santos, A. J. dos, Houmard, M., Câmara, M. A., Rodrigues, A. R., & Rubio, J. C. C. (2023). Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating. International Journal of Advanced Manufacturing Technology, 1-17. doi:10.1007/s00170-023-11072-2
NLM
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Vancouver
Pereira NFS, Reis BCM, Santos AJ dos, Houmard M, Câmara MA, Rodrigues AR, Rubio JCC. Tribological assessment of the SiO2 coating deposited by sol–gel process toward cutting tool coating [Internet]. International Journal of Advanced Manufacturing Technology. 2023 ; 1-17.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s00170-023-11072-2
Artigo de periodico
A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil (2022)
Maia, Cristiana Brasil; Silva, Felipe Venâncio Mitkiewicz; Cabezas Gómez, Luben
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: ENERGIA ELÉTRICA, ÁGUA, DESSALINIZAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil e SILVA, Felipe Venâncio Mitkiewicz e CABEZAS GÓMEZ, Luben. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, p. 1-16, 2022Tradução . . Disponível em: https://doi.org/10.1007/s40430-022-03463-5. Acesso em: 10 set. 2024.
APA
Maia, C. B., Silva, F. V. M., & Cabezas Gómez, L. (2022). A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44, 1-16. doi:10.1007/s40430-022-03463-5
NLM
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Vancouver
Maia CB, Silva FVM, Cabezas Gómez L. A CSP‑desalination system using a supercritical carbon dioxide Brayton cycle in Brazil [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2022 ; 44 1-16.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-022-03463-5
Artigo de periodico
Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters (2022)
Martins, Paulo Henrique; Trindade, Marcelo Areias ; Varoto, Paulo Sérgio
Source: International Journal of Mechanics and Materials in Design. Unidade: EESC
Subjects: FONTES ALTERNATIVAS DE ENERGIA, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Paulo Henrique e TRINDADE, Marcelo Areias e VAROTO, Paulo Sérgio. Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters. International Journal of Mechanics and Materials in Design, p. 1-23, 2022Tradução . . Disponível em: https://doi.org/10.1007/s10999-021-09586-2. Acesso em: 10 set. 2024.
APA
Martins, P. H., Trindade, M. A., & Varoto, P. S. (2022). Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters. International Journal of Mechanics and Materials in Design, 1-23. doi:10.1007/s10999-021-09586-2
NLM
Martins PH, Trindade MA, Varoto PS. Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters [Internet]. International Journal of Mechanics and Materials in Design. 2022 ; 1-23.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s10999-021-09586-2
Vancouver
Martins PH, Trindade MA, Varoto PS. Simplified robust and multiobjective optimization of piezoelectric energy harvesters with uncertain parameters [Internet]. International Journal of Mechanics and Materials in Design. 2022 ; 1-23.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s10999-021-09586-2
Artigo de periodico
Numerical prediction and experimental validation of an onboard rotor under bending (2021)
Sousa, Marcelo S.; Barbosa, Paulo C. P. F; Del Claro, Vergílio T. S.; Nicoletti, Rodrigo; Cavalini, Aldemir A.; Steffen, Valder
Source: Meccanica: An International Journal of Theoretical and Applied Mmechanics. Unidade: EESC
Subjects: ROTOR, ANÁLISE NUMÉRICA, MÉTODO DOS ELEMENTOS FINITOS, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUSA, Marcelo S. et al. Numerical prediction and experimental validation of an onboard rotor under bending. Meccanica: An International Journal of Theoretical and Applied Mmechanics, p. 1-20, 2021Tradução . . Disponível em: https://doi.org/10.1007/s11012-021-01392-6. Acesso em: 10 set. 2024.
APA
Sousa, M. S., Barbosa, P. C. P. F., Del Claro, V. T. S., Nicoletti, R., Cavalini, A. A., & Steffen, V. (2021). Numerical prediction and experimental validation of an onboard rotor under bending. Meccanica: An International Journal of Theoretical and Applied Mmechanics, 1-20. doi:10.1007/s11012-021-01392-6
NLM
Sousa MS, Barbosa PCPF, Del Claro VTS, Nicoletti R, Cavalini AA, Steffen V. Numerical prediction and experimental validation of an onboard rotor under bending [Internet]. Meccanica: An International Journal of Theoretical and Applied Mmechanics. 2021 ; 1-20.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s11012-021-01392-6
Vancouver
Sousa MS, Barbosa PCPF, Del Claro VTS, Nicoletti R, Cavalini AA, Steffen V. Numerical prediction and experimental validation of an onboard rotor under bending [Internet]. Meccanica: An International Journal of Theoretical and Applied Mmechanics. 2021 ; 1-20.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s11012-021-01392-6
Parte de monografia/livro
The influence of economic context on the relationship between manufacturing strategy, practices and performance (2020)
Gambi, Lillian do Nascimento; Boer, Harry; Boer, Henrike Engele Elisabeth; Gerólamo, Mateus Cecílio
Source: Industrial Engineering and Operations Management. Conference titles: International Joint Conference on Industrial Engineering and Operations Management - IJCIEOM. Unidade: EESC
Subjects: MANUFATURA, ENGENHARIA MECÂNICA, TOMADA DE DECISÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GAMBI, Lillian do Nascimento et al. The influence of economic context on the relationship between manufacturing strategy, practices and performance. Industrial Engineering and Operations Management. Tradução . Cham, Switzerland: Springer, 2020. p. 405-415. Disponível em: https://doi.org/10.1007/978-3-030-56920-4_33. Acesso em: 10 set. 2024.
APA
Gambi, L. do N., Boer, H., Boer, H. E. E., & Gerólamo, M. C. (2020). The influence of economic context on the relationship between manufacturing strategy, practices and performance. In Industrial Engineering and Operations Management (p. 405-415). Cham, Switzerland: Springer. doi:10.1007/978-3-030-56920-4_33
NLM
Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33
Vancouver
Gambi L do N, Boer H, Boer HEE, Gerólamo MC. The influence of economic context on the relationship between manufacturing strategy, practices and performance [Internet]. In: Industrial Engineering and Operations Management. Cham, Switzerland: Springer; 2020. p. 405-415.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/978-3-030-56920-4_33
Artigo de periodico
Friction elements based on phenolic resin and slate powder (2020)
Binda, Felipe Ferreira; Oliveira, Victor de Alvarenga; Fortulan, Carlos Alberto ; Palhares, Luciana Boaventura; Santos, Claudio Gouvêa dos
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: FRICÇÃO, ARDÓSIA, RESÍDUOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BINDA, Felipe Ferreira et al. Friction elements based on phenolic resin and slate powder. Journal of Materials Research and Technology, v. 9, n. 3, p. 3378-3383, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.jmrt.2020.01.032. Acesso em: 10 set. 2024.
APA
Binda, F. F., Oliveira, V. de A., Fortulan, C. A., Palhares, L. B., & Santos, C. G. dos. (2020). Friction elements based on phenolic resin and slate powder. Journal of Materials Research and Technology, 9( 3), 3378-3383. doi:10.1016/j.jmrt.2020.01.032
NLM
Binda FF, Oliveira V de A, Fortulan CA, Palhares LB, Santos CG dos. Friction elements based on phenolic resin and slate powder [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 3): 3378-3383.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.jmrt.2020.01.032
Vancouver
Binda FF, Oliveira V de A, Fortulan CA, Palhares LB, Santos CG dos. Friction elements based on phenolic resin and slate powder [Internet]. Journal of Materials Research and Technology. 2020 ; 9( 3): 3378-3383.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.jmrt.2020.01.032
Artigo de periodico
Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator (2018)
Rodrigues, Kleber dos Santos; Trindade, Marcelo Areias
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: MICROSCOPIA DE FORÇA ATÔMICA, MÉTODO DOS ELEMENTOS FINITOS, ATUADORES PIEZELÉTRICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Kleber dos Santos e TRINDADE, Marcelo Areias. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-13, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-018-1347-6. Acesso em: 10 set. 2024.
APA
Rodrigues, K. dos S., & Trindade, M. A. (2018). Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-13. doi:10.1007/s40430-018-1347-6
NLM
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Vancouver
Rodrigues K dos S, Trindade MA. Finite element modeling and analysis of an atomic force microscope cantilever beam coupled to a piezoceramic base actuator [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-13.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-018-1347-6
Artigo de periodico
Detection of cracks in rotating shafts by using the combination resonances approach and the approximated entropy algorithm (2018)
Nicoletti, Rodrigo; Cavalini Junior, Aldemir; Steffen Junior, Valder
Source: Shock and Vibration. Unidade: EESC
Subjects: VIBRAÇÕES, ROTOR, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NICOLETTI, Rodrigo e CAVALINI JUNIOR, Aldemir e STEFFEN JUNIOR, Valder. Detection of cracks in rotating shafts by using the combination resonances approach and the approximated entropy algorithm. Shock and Vibration, v. 2018, p. 1-14, 2018Tradução . . Disponível em: https://doi.org/10.1155/2018/4094631. Acesso em: 10 set. 2024.
APA
Nicoletti, R., Cavalini Junior, A., & Steffen Junior, V. (2018). Detection of cracks in rotating shafts by using the combination resonances approach and the approximated entropy algorithm. Shock and Vibration, 2018, 1-14. doi:10.1155/2018/4094631
NLM
Nicoletti R, Cavalini Junior A, Steffen Junior V. Detection of cracks in rotating shafts by using the combination resonances approach and the approximated entropy algorithm [Internet]. Shock and Vibration. 2018 ; 2018 1-14.[citado 2024 set. 10 ] Available from: https://doi.org/10.1155/2018/4094631
Vancouver
Nicoletti R, Cavalini Junior A, Steffen Junior V. Detection of cracks in rotating shafts by using the combination resonances approach and the approximated entropy algorithm [Internet]. Shock and Vibration. 2018 ; 2018 1-14.[citado 2024 set. 10 ] Available from: https://doi.org/10.1155/2018/4094631
Artigo de periodico
Cementitious porous material applied to precision aerostatics bearings (2018)
Silva, Leandro José da; Panzera, Túlio Hallak ; Viera, Luciano Machado Gomes; Bowen, Christopher Rhys; Duduch, Jaime Gilberto; Rubio, Juan Carlos Campos
Source: International Journal of Precision Engineering and Manufacturing. Unidade: EESC
Subjects: MATERIAIS POROSOS, ROLAMENTOS, AEROESTÁTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Leandro José da et al. Cementitious porous material applied to precision aerostatics bearings. International Journal of Precision Engineering and Manufacturing, v. 19, n. 2, p. 239-243, 2018Tradução . . Disponível em: https://doi.org/10.1007/s12541-018-0027-x. Acesso em: 10 set. 2024.
APA
Silva, L. J. da, Panzera, T. H., Viera, L. M. G., Bowen, C. R., Duduch, J. G., & Rubio, J. C. C. (2018). Cementitious porous material applied to precision aerostatics bearings. International Journal of Precision Engineering and Manufacturing, 19( 2), 239-243. doi:10.1007/s12541-018-0027-x
NLM
Silva LJ da, Panzera TH, Viera LMG, Bowen CR, Duduch JG, Rubio JCC. Cementitious porous material applied to precision aerostatics bearings [Internet]. International Journal of Precision Engineering and Manufacturing. 2018 ; 19( 2): 239-243.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s12541-018-0027-x
Vancouver
Silva LJ da, Panzera TH, Viera LMG, Bowen CR, Duduch JG, Rubio JCC. Cementitious porous material applied to precision aerostatics bearings [Internet]. International Journal of Precision Engineering and Manufacturing. 2018 ; 19( 2): 239-243.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s12541-018-0027-x
Artigo de periodico
Multiobjective optimization of an aircraft wing design with respect to structural and aeroelastic characteristics using neural network metamodel (2018)
Caixeta Junior, Paulo Roberto; Marques, Flavio Donizeti
Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC
Subjects: AEROELASTICIDADE DE AERONAVES, ASAS DE AERONAVES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAIXETA JUNIOR, Paulo Roberto e MARQUES, Flavio Donizeti. Multiobjective optimization of an aircraft wing design with respect to structural and aeroelastic characteristics using neural network metamodel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 40, p. 1-11, 2018Tradução . . Disponível em: https://doi.org/10.1007/s40430-017-0958-7. Acesso em: 10 set. 2024.
APA
Caixeta Junior, P. R., & Marques, F. D. (2018). Multiobjective optimization of an aircraft wing design with respect to structural and aeroelastic characteristics using neural network metamodel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-11. doi:10.1007/s40430-017-0958-7
NLM
Caixeta Junior PR, Marques FD. Multiobjective optimization of an aircraft wing design with respect to structural and aeroelastic characteristics using neural network metamodel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-11.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-017-0958-7
Vancouver
Caixeta Junior PR, Marques FD. Multiobjective optimization of an aircraft wing design with respect to structural and aeroelastic characteristics using neural network metamodel [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018 ; 40 1-11.[citado 2024 set. 10 ] Available from: https://doi.org/10.1007/s40430-017-0958-7
Trabalho de evento
Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils (2017)
Pereira, Daniel Almeida; Santos, Carlos Renan dos ; Marques, Flavio Donizeti
Source: Proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics - DINAME. Unidade: EESC
Subjects: AEROELASTICIDADE DE AERONAVES, AEROFÓLIOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Daniel Almeida e SANTOS, Carlos Renan dos e MARQUES, Flavio Donizeti. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf. Acesso em: 10 set. 2024.
APA
Pereira, D. A., Santos, C. R. dos, & Marques, F. D. (2017). Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
NLM
Pereira DA, Santos CR dos, Marques FD. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
Vancouver
Pereira DA, Santos CR dos, Marques FD. Strucutral nonlinearitties effect on aeroelastic bifurcation phenomena in airfoils [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/2944c4eb-e02f-4c63-968d-6fe84db91245/PROD_25662_SYSNO_3123990.pdf
Artigo de periodico
Performance analysis of proportional-integral feedback control for the reduction of stick-slip-induced torsional vibrations in oil well drillstrings (2017)
Monteiro, Hugo Leonardo Salomão; Trindade, Marcelo Areias
Source: Journal of Sound and Vibration. Unidade: EESC
Subjects: PERFURAÇÃO DE POÇOS, PETRÓLEO, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONTEIRO, Hugo Leonardo Salomão e TRINDADE, Marcelo Areias. Performance analysis of proportional-integral feedback control for the reduction of stick-slip-induced torsional vibrations in oil well drillstrings. Journal of Sound and Vibration, v. 398, p. 28-38, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.jsv.2017.03.013. Acesso em: 10 set. 2024.
APA
Monteiro, H. L. S., & Trindade, M. A. (2017). Performance analysis of proportional-integral feedback control for the reduction of stick-slip-induced torsional vibrations in oil well drillstrings. Journal of Sound and Vibration, 398, 28-38. doi:10.1016/j.jsv.2017.03.013
NLM
Monteiro HLS, Trindade MA. Performance analysis of proportional-integral feedback control for the reduction of stick-slip-induced torsional vibrations in oil well drillstrings [Internet]. Journal of Sound and Vibration. 2017 ; 398 28-38.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.jsv.2017.03.013
Vancouver
Monteiro HLS, Trindade MA. Performance analysis of proportional-integral feedback control for the reduction of stick-slip-induced torsional vibrations in oil well drillstrings [Internet]. Journal of Sound and Vibration. 2017 ; 398 28-38.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.jsv.2017.03.013
Trabalho de evento
Finite element techniques for the characterization of effective properties of transverse piezoelectric macro-fibre composites (2017)
Trindade, Marcelo Areias ; Benjeddou, Ayech
Source: Proceedings. Conference titles: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS). Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, PIEZOELETRICIDADE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRINDADE, Marcelo Areias e BENJEDDOU, Ayech. Finite element techniques for the characterization of effective properties of transverse piezoelectric macro-fibre composites. 2017, Anais.. Dordrecht, The Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2017. Disponível em: https://repositorio.usp.br/directbitstream/005eda4a-ac63-4802-9fda-518c0e699b1d/OK___trabalho%2015%20-%20Finite%20element%20techniques%20for%20the%20characterization%20of%20effective%20properties%20of%20transverse%20piezoelectric%20macro-fibre%20composites.pdf. Acesso em: 10 set. 2024.
APA
Trindade, M. A., & Benjeddou, A. (2017). Finite element techniques for the characterization of effective properties of transverse piezoelectric macro-fibre composites. In Proceedings. Dordrecht, The Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/005eda4a-ac63-4802-9fda-518c0e699b1d/OK___trabalho%2015%20-%20Finite%20element%20techniques%20for%20the%20characterization%20of%20effective%20properties%20of%20transverse%20piezoelectric%20macro-fibre%20composites.pdf
NLM
Trindade MA, Benjeddou A. Finite element techniques for the characterization of effective properties of transverse piezoelectric macro-fibre composites [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/005eda4a-ac63-4802-9fda-518c0e699b1d/OK___trabalho%2015%20-%20Finite%20element%20techniques%20for%20the%20characterization%20of%20effective%20properties%20of%20transverse%20piezoelectric%20macro-fibre%20composites.pdf
Vancouver
Trindade MA, Benjeddou A. Finite element techniques for the characterization of effective properties of transverse piezoelectric macro-fibre composites [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/005eda4a-ac63-4802-9fda-518c0e699b1d/OK___trabalho%2015%20-%20Finite%20element%20techniques%20for%20the%20characterization%20of%20effective%20properties%20of%20transverse%20piezoelectric%20macro-fibre%20composites.pdf
Trabalho de evento
Effect of adhesive layer properties on the energy harvesting performance of a plate with topologically optimized networks of piezoelectric patches (2017)
Quiñones Velásquez, Jelder ; Trindade, Marcelo Areias
Source: Proceedings. Conference titles: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS). Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, PIEZOELETRICIDADE, ENERGIA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
QUIÑONES VELÁSQUEZ, Jelder e TRINDADE, Marcelo Areias. Effect of adhesive layer properties on the energy harvesting performance of a plate with topologically optimized networks of piezoelectric patches. 2017, Anais.. Dordrecht, The Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2017. Disponível em: https://repositorio.usp.br/directbitstream/29552efe-e0a7-4394-a84c-9e2bae32f22f/OK___trabalho%2016%20-%20Effect%20of%20adhesive%20layer%20properties%20on%20the%20energy%20harvesting%20performance%20of%20a%20plate%20with%20topologically%20optimized%20networks%20of%20piezoelectric.pdf. Acesso em: 10 set. 2024.
APA
Quiñones Velásquez, J., & Trindade, M. A. (2017). Effect of adhesive layer properties on the energy harvesting performance of a plate with topologically optimized networks of piezoelectric patches. In Proceedings. Dordrecht, The Netherlands: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/29552efe-e0a7-4394-a84c-9e2bae32f22f/OK___trabalho%2016%20-%20Effect%20of%20adhesive%20layer%20properties%20on%20the%20energy%20harvesting%20performance%20of%20a%20plate%20with%20topologically%20optimized%20networks%20of%20piezoelectric.pdf
NLM
Quiñones Velásquez J, Trindade MA. Effect of adhesive layer properties on the energy harvesting performance of a plate with topologically optimized networks of piezoelectric patches [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/29552efe-e0a7-4394-a84c-9e2bae32f22f/OK___trabalho%2016%20-%20Effect%20of%20adhesive%20layer%20properties%20on%20the%20energy%20harvesting%20performance%20of%20a%20plate%20with%20topologically%20optimized%20networks%20of%20piezoelectric.pdf
Vancouver
Quiñones Velásquez J, Trindade MA. Effect of adhesive layer properties on the energy harvesting performance of a plate with topologically optimized networks of piezoelectric patches [Internet]. Proceedings. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/29552efe-e0a7-4394-a84c-9e2bae32f22f/OK___trabalho%2016%20-%20Effect%20of%20adhesive%20layer%20properties%20on%20the%20energy%20harvesting%20performance%20of%20a%20plate%20with%20topologically%20optimized%20networks%20of%20piezoelectric.pdf
Trabalho de evento
Robust design and uncertainity analysis of an energy harvesting resonant device (2017)
Martins, Paulo Henrique; Trindade, Marcelo Areias
Source: Anais. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PIEZOELETRICIDADE, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTINS, Paulo Henrique e TRINDADE, Marcelo Areias. Robust design and uncertainity analysis of an energy harvesting resonant device. 2017, Anais.. Rio de Janeiro, RJ: ABCM, 2017. Disponível em: https://repositorio.usp.br/directbitstream/0757daef-9c9a-4775-996a-44bf0bec7517/OK___trabalho%2019%20-%20Robust%20design%20and%20uncertainty%20analysis%20of%20an%20energy%20harvesting%20resonant%20device%20%28COBEM%202017%29.pdf. Acesso em: 10 set. 2024.
APA
Martins, P. H., & Trindade, M. A. (2017). Robust design and uncertainity analysis of an energy harvesting resonant device. In Anais. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/0757daef-9c9a-4775-996a-44bf0bec7517/OK___trabalho%2019%20-%20Robust%20design%20and%20uncertainty%20analysis%20of%20an%20energy%20harvesting%20resonant%20device%20%28COBEM%202017%29.pdf
NLM
Martins PH, Trindade MA. Robust design and uncertainity analysis of an energy harvesting resonant device [Internet]. Anais. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/0757daef-9c9a-4775-996a-44bf0bec7517/OK___trabalho%2019%20-%20Robust%20design%20and%20uncertainty%20analysis%20of%20an%20energy%20harvesting%20resonant%20device%20%28COBEM%202017%29.pdf
Vancouver
Martins PH, Trindade MA. Robust design and uncertainity analysis of an energy harvesting resonant device [Internet]. Anais. 2017 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/0757daef-9c9a-4775-996a-44bf0bec7517/OK___trabalho%2019%20-%20Robust%20design%20and%20uncertainty%20analysis%20of%20an%20energy%20harvesting%20resonant%20device%20%28COBEM%202017%29.pdf
Artigo de periodico
Thermodynamic analysis of the drying process of bananas in a smallscale solar updraft tower in Brazil (2017)
Maia, Cristiana Brasil; Ferreira, André Guimarães; Cabezas Gómez, Luben ; Silva, Janaina de Oliveira Castro; Hanriot, Sergio de Morais
Source: Renewable Energy. Unidade: EESC
Subjects: SECAGEM, BANANA, TERMODINÂMICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Cristiana Brasil et al. Thermodynamic analysis of the drying process of bananas in a smallscale solar updraft tower in Brazil. Renewable Energy, v. 114, p. 1005-1012, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.renene.2017.07.102. Acesso em: 10 set. 2024.
APA
Maia, C. B., Ferreira, A. G., Cabezas Gómez, L., Silva, J. de O. C., & Hanriot, S. de M. (2017). Thermodynamic analysis of the drying process of bananas in a smallscale solar updraft tower in Brazil. Renewable Energy, 114, 1005-1012. doi:10.1016/j.renene.2017.07.102
NLM
Maia CB, Ferreira AG, Cabezas Gómez L, Silva J de OC, Hanriot S de M. Thermodynamic analysis of the drying process of bananas in a smallscale solar updraft tower in Brazil [Internet]. Renewable Energy. 2017 ; 114 1005-1012.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.renene.2017.07.102
Vancouver
Maia CB, Ferreira AG, Cabezas Gómez L, Silva J de OC, Hanriot S de M. Thermodynamic analysis of the drying process of bananas in a smallscale solar updraft tower in Brazil [Internet]. Renewable Energy. 2017 ; 114 1005-1012.[citado 2024 set. 10 ] Available from: https://doi.org/10.1016/j.renene.2017.07.102
Artigo de periodico
Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing (2017)
Silva, Leandro J. da; Panzera, Túlio Hallak ; Vieira, Luciano M. G.; Duduch, Jaime Gilberto; Bowen, Christopher R.; Rubio, Juan C. Campos
Source: Proceedings of the Institution of Mechanical Engineers : Part J : Journal of Engineering Tribology. Unidade: EESC
Subjects: ROLAMENTOS, AEROESTÁTICA, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Leandro J. da et al. Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing. Proceedings of the Institution of Mechanical Engineers : Part J : Journal of Engineering Tribology, p. 1-11, 2017Tradução . . Disponível em: https://doi.org/10.1177/1350650117696388. Acesso em: 10 set. 2024.
APA
Silva, L. J. da, Panzera, T. H., Vieira, L. M. G., Duduch, J. G., Bowen, C. R., & Rubio, J. C. C. (2017). Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing. Proceedings of the Institution of Mechanical Engineers : Part J : Journal of Engineering Tribology, 1-11. doi:10.1177/1350650117696388
NLM
Silva LJ da, Panzera TH, Vieira LMG, Duduch JG, Bowen CR, Rubio JCC. Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing [Internet]. Proceedings of the Institution of Mechanical Engineers : Part J : Journal of Engineering Tribology. 2017 ; 1-11.[citado 2024 set. 10 ] Available from: https://doi.org/10.1177/1350650117696388
Vancouver
Silva LJ da, Panzera TH, Vieira LMG, Duduch JG, Bowen CR, Rubio JCC. Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing [Internet]. Proceedings of the Institution of Mechanical Engineers : Part J : Journal of Engineering Tribology. 2017 ; 1-11.[citado 2024 set. 10 ] Available from: https://doi.org/10.1177/1350650117696388
Trabalho de evento
Effect of bit-rock interaction uncertainties on the torsional stability regions of an oil-well drilling system (2016)
Monteiro, Hugo Leonardo Salomão; Trindade, Marcelo Areias
Source: Proceedings. Conference titles: International Symposium on Uncertainty Quantification and Stochastic Modeling. Unidade: EESC
Subjects: PERFURAÇÃO DE POÇOS, PETRÓLEO, VIBRAÇÕES, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MONTEIRO, Hugo Leonardo Salomão e TRINDADE, Marcelo Areias. Effect of bit-rock interaction uncertainties on the torsional stability regions of an oil-well drilling system. 2016, Anais.. Rio de Janeiro, RJ: ABCM, 2016. Disponível em: https://repositorio.usp.br/directbitstream/7906f5a3-a34a-4703-89dc-6322d522d014/OK___trabalho%2023%20-%20Effect%20of%20bit-rock%20interaction%20uncertainties%20on%20the%20torsional%20stability%20regions%20of%20an%20oil-well%20drilling%20system.pdf. Acesso em: 10 set. 2024.
APA
Monteiro, H. L. S., & Trindade, M. A. (2016). Effect of bit-rock interaction uncertainties on the torsional stability regions of an oil-well drilling system. In Proceedings. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7906f5a3-a34a-4703-89dc-6322d522d014/OK___trabalho%2023%20-%20Effect%20of%20bit-rock%20interaction%20uncertainties%20on%20the%20torsional%20stability%20regions%20of%20an%20oil-well%20drilling%20system.pdf
NLM
Monteiro HLS, Trindade MA. Effect of bit-rock interaction uncertainties on the torsional stability regions of an oil-well drilling system [Internet]. Proceedings. 2016 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/7906f5a3-a34a-4703-89dc-6322d522d014/OK___trabalho%2023%20-%20Effect%20of%20bit-rock%20interaction%20uncertainties%20on%20the%20torsional%20stability%20regions%20of%20an%20oil-well%20drilling%20system.pdf
Vancouver
Monteiro HLS, Trindade MA. Effect of bit-rock interaction uncertainties on the torsional stability regions of an oil-well drilling system [Internet]. Proceedings. 2016 ;[citado 2024 set. 10 ] Available from: https://repositorio.usp.br/directbitstream/7906f5a3-a34a-4703-89dc-6322d522d014/OK___trabalho%2023%20-%20Effect%20of%20bit-rock%20interaction%20uncertainties%20on%20the%20torsional%20stability%20regions%20of%20an%20oil-well%20drilling%20system.pdf
Artigo de periodico
Airfoil control surface discontinuous nonlinearity experimental assessment and numerical model validation (2016)
Vasconcellos, Rui Marcos Grombone de; Abdelkefi, Abdessattar; Hajj, Muhammad R; Almeida, Daniel P.; Marques, Flavio Donizeti
Source: Journal of Vibration and Control. Unidade: EESC
Subjects: AEROELASTICIDADE DE AERONAVES, ANÁLISE DE SÉRIES TEMPORAIS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VASCONCELLOS, Rui Marcos Grombone de et al. Airfoil control surface discontinuous nonlinearity experimental assessment and numerical model validation. Journal of Vibration and Control, v. 22, n. 6, p. 1633-1644, 2016Tradução . . Disponível em: https://doi.org/10.1177/1077546314543911. Acesso em: 10 set. 2024.
APA
Vasconcellos, R. M. G. de, Abdelkefi, A., Hajj, M. R., Almeida, D. P., & Marques, F. D. (2016). Airfoil control surface discontinuous nonlinearity experimental assessment and numerical model validation. Journal of Vibration and Control, 22( 6), 1633-1644. doi:10.1177/1077546314543911
NLM
Vasconcellos RMG de, Abdelkefi A, Hajj MR, Almeida DP, Marques FD. Airfoil control surface discontinuous nonlinearity experimental assessment and numerical model validation [Internet]. Journal of Vibration and Control. 2016 ; 22( 6): 1633-1644.[citado 2024 set. 10 ] Available from: https://doi.org/10.1177/1077546314543911
Vancouver
Vasconcellos RMG de, Abdelkefi A, Hajj MR, Almeida DP, Marques FD. Airfoil control surface discontinuous nonlinearity experimental assessment and numerical model validation [Internet]. Journal of Vibration and Control. 2016 ; 22( 6): 1633-1644.[citado 2024 set. 10 ] Available from: https://doi.org/10.1177/1077546314543911
Artigo de periodico
Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers (2016)
Souza, Diego Amorim Caetano de; Cabezas Gómez, Luben ; Silva, José Antônio; Campos, Julio Cesar Costa
Source: REM: International Engineering Journal. Unidade: EESC
Assunto: ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Diego Amorim Caetano de et al. Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers. REM: International Engineering Journal, v. 69, n. 3, p. Jul./Se 2016, 2016Tradução . . Disponível em: https://doi.org/10.1590/0370-44672016690003. Acesso em: 10 set. 2024.
APA
Souza, D. A. C. de, Cabezas Gómez, L., Silva, J. A., & Campos, J. C. C. (2016). Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers. REM: International Engineering Journal, 69( 3), Jul./Se 2016. doi:10.1590/0370-44672016690003
NLM
Souza DAC de, Cabezas Gómez L, Silva JA, Campos JCC. Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers [Internet]. REM: International Engineering Journal. 2016 ; 69( 3): Jul./Se 2016.[citado 2024 set. 10 ] Available from: https://doi.org/10.1590/0370-44672016690003
Vancouver
Souza DAC de, Cabezas Gómez L, Silva JA, Campos JCC. Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers [Internet]. REM: International Engineering Journal. 2016 ; 69( 3): Jul./Se 2016.[citado 2024 set. 10 ] Available from: https://doi.org/10.1590/0370-44672016690003

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Countries/Territories

Indexado em

Non normalized affiliation

Countries of institutions of collaboration