ReP USP - Resultado da busca

Artigo de periodico
Effects of Forced Convection on the Purification of Metallurgical Silicon by Directional Solidification (2024)
Nascimento, Denir Paganini ; Martorano, Marcelo de Aquino ; Lima, Moysés Leite de; Ferreira Neto, João Batista; Padilha, Angelo Fernando
Source: Silicon. Unidade: EP
Subjects: SOLIDIFICAÇÃO, REFINO, SILÍCIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Denir Paganini et al. Effects of Forced Convection on the Purification of Metallurgical Silicon by Directional Solidification. Silicon, v. 16, p. 1125-1145, 2024Tradução . . Disponível em: https://doi.org/10.1007/s12633-023-02742-7. Acesso em: 14 nov. 2024.
APA
Nascimento, D. P., Martorano, M. de A., Lima, M. L. de, Ferreira Neto, J. B., & Padilha, A. F. (2024). Effects of Forced Convection on the Purification of Metallurgical Silicon by Directional Solidification. Silicon, 16, 1125-1145. doi:10.1007/s12633-023-02742-7
NLM
Nascimento DP, Martorano M de A, Lima ML de, Ferreira Neto JB, Padilha AF. Effects of Forced Convection on the Purification of Metallurgical Silicon by Directional Solidification [Internet]. Silicon. 2024 ;161125-1145.[citado 2024 nov. 14 ] Available from: https://doi.org/10.1007/s12633-023-02742-7
Vancouver
Nascimento DP, Martorano M de A, Lima ML de, Ferreira Neto JB, Padilha AF. Effects of Forced Convection on the Purification of Metallurgical Silicon by Directional Solidification [Internet]. Silicon. 2024 ;161125-1145.[citado 2024 nov. 14 ] Available from: https://doi.org/10.1007/s12633-023-02742-7
Artigo de periodico
High‑silicon electrical steel powders aimed for additive manufacturing (2024)
Pinotti, Vitor E; Andreoli, A. F.; Nakahashi, A. Nakahashi; Boccalini Júnior, Mário; Landgraf, Fernando José Gomes; Gargarella, Piter
Source: Powder Technology. Unidade: EP
Subjects: AÇO ELÉTRICO, ATOMIZAÇÃO, SILÍCIO, AÇO ELÉTRICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINOTTI, Vitor E et al. High‑silicon electrical steel powders aimed for additive manufacturing. Powder Technology, v. 44, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.powtec.2024.119986. Acesso em: 14 nov. 2024.
APA
Pinotti, V. E., Andreoli, A. F., Nakahashi, A. N., Boccalini Júnior, M., Landgraf, F. J. G., & Gargarella, P. (2024). High‑silicon electrical steel powders aimed for additive manufacturing. Powder Technology, 44. doi:10.1016/j.powtec.2024.119986
NLM
Pinotti VE, Andreoli AF, Nakahashi AN, Boccalini Júnior M, Landgraf FJG, Gargarella P. High‑silicon electrical steel powders aimed for additive manufacturing [Internet]. Powder Technology. 2024 ; 44[citado 2024 nov. 14 ] Available from: https://doi.org/10.1016/j.powtec.2024.119986
Vancouver
Pinotti VE, Andreoli AF, Nakahashi AN, Boccalini Júnior M, Landgraf FJG, Gargarella P. High‑silicon electrical steel powders aimed for additive manufacturing [Internet]. Powder Technology. 2024 ; 44[citado 2024 nov. 14 ] Available from: https://doi.org/10.1016/j.powtec.2024.119986
Artigo de periodico
The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer (2024)
Pino, Gilberto Garcia del; Bezazi, Abderrezak; Kieling, Antonio Claudio; Macedo Neto, José Costa de; Garcia, Sofia Dehaini; Rivera, Jose Luis Valin; Fernandez, Meyli Valin; Torres, Aristides Rivera; Valenzuela Díaz, Francisco Rolando
Source: Polymers. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS, SISAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PINO, Gilberto Garcia del et al. The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer. Polymers, v. 16, p. 15 , 2024Tradução . . Disponível em: https://doi.org/10.3390/polym16212980. Acesso em: 14 nov. 2024.
APA
Pino, G. G. del, Bezazi, A., Kieling, A. C., Macedo Neto, J. C. de, Garcia, S. D., Rivera, J. L. V., et al. (2024). The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer. Polymers, 16, 15 . doi:10.3390/polym16212980
NLM
Pino GG del, Bezazi A, Kieling AC, Macedo Neto JC de, Garcia SD, Rivera JLV, Fernandez MV, Torres AR, Valenzuela Díaz FR. The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer [Internet]. Polymers. 2024 ; 16 15 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym16212980
Vancouver
Pino GG del, Bezazi A, Kieling AC, Macedo Neto JC de, Garcia SD, Rivera JLV, Fernandez MV, Torres AR, Valenzuela Díaz FR. The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer [Internet]. Polymers. 2024 ; 16 15 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym16212980
Artigo de periodico
Graphene oxide: A comparasion of reduction methods (2023)
Barros, Natalia Garrotte de ; Gonzaga Neto, Abel Cardoso ; Vaccioli, Kleber Bitencourt; Angulo, Hugo Rafael Vallejo; Silva, Leonardo Gondim de Andrade e ; Toffoli, Samuel Márcio ; Valera, Ticiane Sanches
Source: C Journal of Carbon Research. Unidade: EP
Subjects: REDUÇÃO, ELÉTRONS, QUÍMICA VERDE, RAIOS GAMA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BARROS, Natalia Garrotte de et al. Graphene oxide: A comparasion of reduction methods. C Journal of Carbon Research, v. 9, n. 73, 2023Tradução . . Disponível em: https://doi.org/10.3390/c9030073. Acesso em: 14 nov. 2024.
APA
Barros, N. G. de, Gonzaga Neto, A. C., Vaccioli, K. B., Angulo, H. R. V., Silva, L. G. de A. e, Toffoli, S. M., & Valera, T. S. (2023). Graphene oxide: A comparasion of reduction methods. C Journal of Carbon Research, 9( 73). doi:10.3390/c9030073
NLM
Barros NG de, Gonzaga Neto AC, Vaccioli KB, Angulo HRV, Silva LG de A e, Toffoli SM, Valera TS. Graphene oxide: A comparasion of reduction methods [Internet]. C Journal of Carbon Research. 2023 ;9( 73):[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/c9030073
Vancouver
Barros NG de, Gonzaga Neto AC, Vaccioli KB, Angulo HRV, Silva LG de A e, Toffoli SM, Valera TS. Graphene oxide: A comparasion of reduction methods [Internet]. C Journal of Carbon Research. 2023 ;9( 73):[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/c9030073
Artigo de periodico
Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model (2023)
Fernandez, Meyli Valin; Rivera, José Luis Valin; Rodriguez, Frank Pérez; Losada, Henry Figueredo; Abreu, Maria Elena Fernández; Valenzuela Díaz, Francisco Rolando ; Soto, Angel Rodriguez; Alvarez, Alexandre Alfonso; Quinteros, Roberto; Ketterer, Cristobal galleguillos; Pino, Gilberto Garcia del
Source: Applied Science. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS, BENTONITA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDEZ, Meyli Valin et al. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model. Applied Science, v. 13, p. 14 , 2023Tradução . . Disponível em: https://doi.org/10.3390/app13042677. Acesso em: 14 nov. 2024.
APA
Fernandez, M. V., Rivera, J. L. V., Rodriguez, F. P., Losada, H. F., Abreu, M. E. F., Valenzuela Díaz, F. R., et al. (2023). Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model. Applied Science, 13, 14 . doi:10.3390/app13042677
NLM
Fernandez MV, Rivera JLV, Rodriguez FP, Losada HF, Abreu MEF, Valenzuela Díaz FR, Soto AR, Alvarez AA, Quinteros R, Ketterer C galleguillos, Pino GG del. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model [Internet]. Applied Science. 2023 ; 13 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/app13042677
Vancouver
Fernandez MV, Rivera JLV, Rodriguez FP, Losada HF, Abreu MEF, Valenzuela Díaz FR, Soto AR, Alvarez AA, Quinteros R, Ketterer C galleguillos, Pino GG del. Mechanical Characterization of a Polymer/Natural Fibers/Bentonite Composite Material with Implementation of a Continuous Damage Model [Internet]. Applied Science. 2023 ; 13 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/app13042677
Artigo de periodico
Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector (2023)
Teles, Beatriz Arioli de Sá ; Cunha, Isadora Luiza Climaco ; Silva Neto, Manoel Lisboa da; Wiebeck, Hélio ; Valera, Ticiane Sanches ; Souza, Simara Silveira de; Schmitt, Alfredo Felipe de Oliveira; Oliveira, Vinícius; Kulay, Luiz Alexandre
Source: Recycling. Unidade: EP
Subjects: PLÁSTICOS, RECICLAGEM DE RESÍDUOS URBANOS, RESÍDUOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TELES, Beatriz Arioli de Sá et al. Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector. Recycling, v. 8, n. 51, p. 1-20, 2023Tradução . . Disponível em: https://doi.org/10.3390/recycling8030051. Acesso em: 14 nov. 2024.
APA
Teles, B. A. de S., Cunha, I. L. C., Silva Neto, M. L. da, Wiebeck, H., Valera, T. S., Souza, S. S. de, et al. (2023). Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector. Recycling, 8( 51), 1-20. doi:10.3390/recycling8030051
NLM
Teles BA de S, Cunha ILC, Silva Neto ML da, Wiebeck H, Valera TS, Souza SS de, Schmitt AF de O, Oliveira V, Kulay LA. Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector [Internet]. Recycling. 2023 ;8( 51): 1-20.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/recycling8030051
Vancouver
Teles BA de S, Cunha ILC, Silva Neto ML da, Wiebeck H, Valera TS, Souza SS de, Schmitt AF de O, Oliveira V, Kulay LA. Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector [Internet]. Recycling. 2023 ;8( 51): 1-20.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/recycling8030051
Artigo de periodico
Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites (2023)
Rivera, Jose Luis Valin ; Reyes, Cristian Rodolfo Valenzuela; Wachtendorff, Arturo Andres Quinteros; Soto, Angel Rodriguez ; Fernandez, Meyli Valin ; Abarzúa, Roberto Iquilio; Ortega, Alvaro González ; Pino, Gilberto Garcia del ; Valenzuela Díaz, Francisco Rolando
Source: Polymers. Unidade: EP
Subjects: BENTONITA, POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS, SISAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RIVERA, Jose Luis Valin et al. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites. Polymers, v. 15, n. 10, p. 17 , 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15193963. Acesso em: 14 nov. 2024.
APA
Rivera, J. L. V., Reyes, C. R. V., Wachtendorff, A. A. Q., Soto, A. R., Fernandez, M. V., Abarzúa, R. I., et al. (2023). Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites. Polymers, 15( 10), 17 . doi:10.3390/polym15193963
NLM
Rivera JLV, Reyes CRV, Wachtendorff AAQ, Soto AR, Fernandez MV, Abarzúa RI, Ortega AG, Pino GG del, Valenzuela Díaz FR. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites [Internet]. Polymers. 2023 ; 15( 10): 17 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15193963
Vancouver
Rivera JLV, Reyes CRV, Wachtendorff AAQ, Soto AR, Fernandez MV, Abarzúa RI, Ortega AG, Pino GG del, Valenzuela Díaz FR. Influence of Bentonite Particles on the Mechanical Properties of Polyester–Sisal Fiber Composites [Internet]. Polymers. 2023 ; 15( 10): 17 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15193963
Artigo de periodico
Influence of Mo Content on the Precipitation Behavior of 13Ni Maraging Ultra-High Strength Steels (2023)
Fonseca, Daniela Passarelo Moura da ; Altoe, Maria Virginia Pires ; Archanjo, Braulio Soares ; Annese, Emilia ; Padilha, Angelo Fernando
Source: Metals. Unidade: EP
Subjects: AÇO, MOLIBDÊNIO, ENDURECIMENTO POR PRECIPITAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONSECA, Daniela Passarelo Moura da et al. Influence of Mo Content on the Precipitation Behavior of 13Ni Maraging Ultra-High Strength Steels. Metals, v. 13, p. 14 , 2023Tradução . . Disponível em: https://doi.org/10.3390/met13121929. Acesso em: 14 nov. 2024.
APA
Fonseca, D. P. M. da, Altoe, M. V. P., Archanjo, B. S., Annese, E., & Padilha, A. F. (2023). Influence of Mo Content on the Precipitation Behavior of 13Ni Maraging Ultra-High Strength Steels. Metals, 13, 14 . doi:10.3390/met13121929
NLM
Fonseca DPM da, Altoe MVP, Archanjo BS, Annese E, Padilha AF. Influence of Mo Content on the Precipitation Behavior of 13Ni Maraging Ultra-High Strength Steels [Internet]. Metals. 2023 ; 13 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met13121929
Vancouver
Fonseca DPM da, Altoe MVP, Archanjo BS, Annese E, Padilha AF. Influence of Mo Content on the Precipitation Behavior of 13Ni Maraging Ultra-High Strength Steels [Internet]. Metals. 2023 ; 13 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met13121929
Trabalho de evento-anais periodico
Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations (2023)
Pereira, Henrique Boschetti ; Ariza Echeverri, Edwan Anderson ; Centeno, Dany Michell Andrade ; Alves, Luiz Henrique Dias ; Goldenstein, Hélio
Source: Key Engineering Materials. Conference titles: THERMEC 2023. Unidade: EP
Subjects: MUDANÇA DE FASE, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Henrique Boschetti et al. Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations. Key Engineering Materials. Pfaffikon: Escola Politécnica, Universidade de São Paulo. Disponível em: https://repositorio.usp.br/directbitstream/bbf7d90c-6b52-4e4d-9ffd-9c8a28cb4fa1/GOLDENSTEIN-2023-3167521-Premium_rail_flash.pdf. Acesso em: 14 nov. 2024. , 2023
APA
Pereira, H. B., Ariza Echeverri, E. A., Centeno, D. M. A., Alves, L. H. D., & Goldenstein, H. (2023). Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations. Key Engineering Materials. Pfaffikon: Escola Politécnica, Universidade de São Paulo. doi:10.4028/p-OPueO9
NLM
Pereira HB, Ariza Echeverri EA, Centeno DMA, Alves LHD, Goldenstein H. Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations [Internet]. Key Engineering Materials. 2023 ; 966( 2): 63-69.[citado 2024 nov. 14 ] Available from: https://repositorio.usp.br/directbitstream/bbf7d90c-6b52-4e4d-9ffd-9c8a28cb4fa1/GOLDENSTEIN-2023-3167521-Premium_rail_flash.pdf
Vancouver
Pereira HB, Ariza Echeverri EA, Centeno DMA, Alves LHD, Goldenstein H. Premium Rail Flash-Butt Welding Process Window Based on Phase Transformations [Internet]. Key Engineering Materials. 2023 ; 966( 2): 63-69.[citado 2024 nov. 14 ] Available from: https://repositorio.usp.br/directbitstream/bbf7d90c-6b52-4e4d-9ffd-9c8a28cb4fa1/GOLDENSTEIN-2023-3167521-Premium_rail_flash.pdf
Artigo de periodico
Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil (2023)
Kieling, Antonio Claudio ; Macedo Neto, José Costa de ; Del Pino, Gilberto Garcia ; Barboza, Ricardo da Silva ; Valenzuela Díaz, Francisco Rolando ; Rivera, Jose Luis Valin ; Fernandez, Meyli Valin ; Ketterer, Cristobal Galleguillos; Ortega, Alvaro González; Abarzúa, Roberto Iquilio
Source: Polymers. Unidade: EP
Subjects: RESINAS EPOXI, MATERIAIS COMPÓSITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
KIELING, Antonio Claudio et al. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil. Polymers, v. 15, n. 11, p. 15 , 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15112532. Acesso em: 14 nov. 2024.
APA
Kieling, A. C., Macedo Neto, J. C. de, Del Pino, G. G., Barboza, R. da S., Valenzuela Díaz, F. R., Rivera, J. L. V., et al. (2023). Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil. Polymers, 15( 11), 15 . doi:10.3390/polym15112532
NLM
Kieling AC, Macedo Neto JC de, Del Pino GG, Barboza R da S, Valenzuela Díaz FR, Rivera JLV, Fernandez MV, Ketterer CG, Ortega AG, Abarzúa RI. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil [Internet]. Polymers. 2023 ; 15( 11): 15 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15112532
Vancouver
Kieling AC, Macedo Neto JC de, Del Pino GG, Barboza R da S, Valenzuela Díaz FR, Rivera JLV, Fernandez MV, Ketterer CG, Ortega AG, Abarzúa RI. Development of an Epoxy Matrix Hybrid Composite with Astrocaryum Aculeatum (Tucumã) Endocarp and Kaolin from the Amazonas State in Brazil [Internet]. Polymers. 2023 ; 15( 11): 15 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15112532
Artigo de periodico
Influence of Reinforcing Efficiency of Clay on the Mechanical Properties of Poly(butylene terephthalate) Nanocomposite (2023)
Colombo, Maria A. S.; Valenzuela Díaz, Francisco Rolando ; Kodali, Deepa; Rangari, Vijaya ; Guven, Olgun ; Moura, Esperidiana Augusta Barretos de
Source: Ceramics. Unidade: EP
Subjects: NANOCOMPOSITOS, POLÍMEROS (MATERIAIS), PROPRIEDADES DOS MATERIAIS, ARGILAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COLOMBO, Maria A. S. et al. Influence of Reinforcing Efficiency of Clay on the Mechanical Properties of Poly(butylene terephthalate) Nanocomposite. Ceramics, v. 6, n. 1, p. 58-73, 2023Tradução . . Disponível em: https://doi.org/10.3390/ceramics6010005. Acesso em: 14 nov. 2024.
APA
Colombo, M. A. S., Valenzuela Díaz, F. R., Kodali, D., Rangari, V., Guven, O., & Moura, E. A. B. de. (2023). Influence of Reinforcing Efficiency of Clay on the Mechanical Properties of Poly(butylene terephthalate) Nanocomposite. Ceramics, 6(1), 58-73. doi:10.3390/ceramics6010005
NLM
Colombo MAS, Valenzuela Díaz FR, Kodali D, Rangari V, Guven O, Moura EAB de. Influence of Reinforcing Efficiency of Clay on the Mechanical Properties of Poly(butylene terephthalate) Nanocomposite [Internet]. Ceramics. 2023 ;6(1): 58-73.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/ceramics6010005
Vancouver
Colombo MAS, Valenzuela Díaz FR, Kodali D, Rangari V, Guven O, Moura EAB de. Influence of Reinforcing Efficiency of Clay on the Mechanical Properties of Poly(butylene terephthalate) Nanocomposite [Internet]. Ceramics. 2023 ;6(1): 58-73.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/ceramics6010005
Artigo de periodico
Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers (2023)
Fernandez, Meyli Valin; Gonzáles, Maria José Ahumada; Oyanadel, Rolando Briones; Rivera, José Luis Valin; Soto, Angel Rodriguez; Ortega, Alvaro González; Ketterer, Cristobal Galleguillos; Álvarez, Alexander Alfonso; Valenzuela Díaz, Francisco Rolando ; Pino, Gilberto Garcia del
Source: Polymers. Unidade: EP
Subjects: FIBRAS VEGETAIS, BENTONITA, POLÍMEROS (MATERIAIS), MATERIAIS COMPÓSITOS, PROPRIEDADES DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDEZ, Meyli Valin et al. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers. Polymers, v. 15, p. 1-14, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15061571. Acesso em: 14 nov. 2024.
APA
Fernandez, M. V., Gonzáles, M. J. A., Oyanadel, R. B., Rivera, J. L. V., Soto, A. R., Ortega, A. G., et al. (2023). Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers. Polymers, 15, 1-14. doi:10.3390/polym15061571
NLM
Fernandez MV, Gonzáles MJA, Oyanadel RB, Rivera JLV, Soto AR, Ortega AG, Ketterer CG, Álvarez AA, Valenzuela Díaz FR, Pino GG del. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers [Internet]. Polymers. 2023 ; 15 1-14.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15061571
Vancouver
Fernandez MV, Gonzáles MJA, Oyanadel RB, Rivera JLV, Soto AR, Ortega AG, Ketterer CG, Álvarez AA, Valenzuela Díaz FR, Pino GG del. Effect of Nanometric Particles of Bentonite on the Mechanical Properties of a Thermoset Polymeric Matrix Reinforced with Hemp Fibers [Internet]. Polymers. 2023 ; 15 1-14.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/polym15061571
Artigo de periodico
Synergism between B and Nb Improves Fire Resistance in Microalloyed Steels (2023)
Ferreira, Pedro Pires ; Carvalho, Felipe Moreno; Ariza Echeverri, Edwan Anderson ; Delfino, Pedro Meirelles; Bauri, Luiz Felipe ; Ferreira, Andrei Marx; Braga, Ana Paola; Eleno, Luiz Tadeu Fernandes ; Goldenstein, Hélio ; Tschiptschin, André Paulo
Source: Metals. Unidades: EEL, EP
Subjects: MATERIAIS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Pedro Pires et al. Synergism between B and Nb Improves Fire Resistance in Microalloyed Steels. Metals, v. 13, n. 1, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.3390/met13010084. Acesso em: 14 nov. 2024.
APA
Ferreira, P. P., Carvalho, F. M., Ariza Echeverri, E. A., Delfino, P. M., Bauri, L. F., Ferreira, A. M., et al. (2023). Synergism between B and Nb Improves Fire Resistance in Microalloyed Steels. Metals, 13( 1), 8 . doi:10.3390/met13010084
NLM
Ferreira PP, Carvalho FM, Ariza Echeverri EA, Delfino PM, Bauri LF, Ferreira AM, Braga AP, Eleno LTF, Goldenstein H, Tschiptschin AP. Synergism between B and Nb Improves Fire Resistance in Microalloyed Steels [Internet]. Metals. 2023 ; 13( 1): 8 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met13010084
Vancouver
Ferreira PP, Carvalho FM, Ariza Echeverri EA, Delfino PM, Bauri LF, Ferreira AM, Braga AP, Eleno LTF, Goldenstein H, Tschiptschin AP. Synergism between B and Nb Improves Fire Resistance in Microalloyed Steels [Internet]. Metals. 2023 ; 13( 1): 8 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met13010084
Artigo de periodico
Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization (2022)
El-Fattah, Ahmed Abd ; Fernandes, Elizabeth Grillo ; Chiellini, Federica ; Chiellini, Emo
Source: International Journal of Molecular Sciences. Unidade: EP
Subjects: POLIMERIZAÇÃO, CANDIDA, MORFOLOGIA (ANATOMIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
EL-FATTAH, Ahmed Abd et al. Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization. International Journal of Molecular Sciences, v. 23, n. 3, p. 14 , 2022Tradução . . Disponível em: https://doi.org/10.3390/ijms23031390. Acesso em: 14 nov. 2024.
APA
El-Fattah, A. A., Fernandes, E. G., Chiellini, F., & Chiellini, E. (2022). Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization. International Journal of Molecular Sciences, 23( 3), 14 . doi:10.3390/ijms23031390
NLM
El-Fattah AA, Fernandes EG, Chiellini F, Chiellini E. Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization [Internet]. International Journal of Molecular Sciences. 2022 ; 23( 3): 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/ijms23031390
Vancouver
El-Fattah AA, Fernandes EG, Chiellini F, Chiellini E. Amphiphilic Pentablock Copolymers Prepared from Pluronic and ε-Caprolactone by Enzymatic Ring Opening Polymerization [Internet]. International Journal of Molecular Sciences. 2022 ; 23( 3): 14 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/ijms23031390
Artigo de periodico
Synthesis, characterization, and application of Pt/PtO2-TiO2/SiO2 materials on a continuous flow packed bed microreactor for enhanced photocatalytic activity under sunlight (2022)
Gusmão, Carolina de Araújo; Borges, Laura Teixeira ; Palharim, Priscila Hasse ; Otubo, Larissa ; Rodrigues Jr., Orlando ; Gouvêa, Douglas ; Ramos, Bruno ; Teixeira, Antonio Carlos S. C.
Source: Water. Unidade: EP
Subjects: FOTOCATÁLISE, POLUIÇÃO AMBIENTAL, LUZ, CATALISADORES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUSMÃO, Carolina de Araújo et al. Synthesis, characterization, and application of Pt/PtO2-TiO2/SiO2 materials on a continuous flow packed bed microreactor for enhanced photocatalytic activity under sunlight. Water, v. 14, n. 23, p. 18 , 2022Tradução . . Disponível em: https://doi.org/10.3390/w14233864. Acesso em: 14 nov. 2024.
APA
Gusmão, C. de A., Borges, L. T., Palharim, P. H., Otubo, L., Rodrigues Jr., O., Gouvêa, D., et al. (2022). Synthesis, characterization, and application of Pt/PtO2-TiO2/SiO2 materials on a continuous flow packed bed microreactor for enhanced photocatalytic activity under sunlight. Water, 14( 23), 18 . doi:10.3390/w14233864
NLM
Gusmão C de A, Borges LT, Palharim PH, Otubo L, Rodrigues Jr. O, Gouvêa D, Ramos B, Teixeira ACSC. Synthesis, characterization, and application of Pt/PtO2-TiO2/SiO2 materials on a continuous flow packed bed microreactor for enhanced photocatalytic activity under sunlight [Internet]. Water. 2022 ; 14( 23): 18 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/w14233864
Vancouver
Gusmão C de A, Borges LT, Palharim PH, Otubo L, Rodrigues Jr. O, Gouvêa D, Ramos B, Teixeira ACSC. Synthesis, characterization, and application of Pt/PtO2-TiO2/SiO2 materials on a continuous flow packed bed microreactor for enhanced photocatalytic activity under sunlight [Internet]. Water. 2022 ; 14( 23): 18 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/w14233864
Artigo de periodico
Organophilic Synthetic Stevensite-Zn: Synthesis and Characterization, an Alternative Simple Method (2022)
Carvalho, Thamyres Cardoso de ; Neves, Roberto; Hildebrando, Edemarino Araujo ; Paiva, Lucilene Betega de; Valenzuela Díaz, Francisco Rolando
Source: Minerals. Unidade: EP
Subjects: ARGILAS, SÍNTESE QUÍMICA, PRODUÇÃO INDUSTRIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Thamyres Cardoso de et al. Organophilic Synthetic Stevensite-Zn: Synthesis and Characterization, an Alternative Simple Method. Minerals, v. 12, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.3390/min12121568. Acesso em: 14 nov. 2024.
APA
Carvalho, T. C. de, Neves, R., Hildebrando, E. A., Paiva, L. B. de, & Valenzuela Díaz, F. R. (2022). Organophilic Synthetic Stevensite-Zn: Synthesis and Characterization, an Alternative Simple Method. Minerals, 12, 11 . doi:10.3390/min12121568
NLM
Carvalho TC de, Neves R, Hildebrando EA, Paiva LB de, Valenzuela Díaz FR. Organophilic Synthetic Stevensite-Zn: Synthesis and Characterization, an Alternative Simple Method [Internet]. Minerals. 2022 ; 12 11 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/min12121568
Vancouver
Carvalho TC de, Neves R, Hildebrando EA, Paiva LB de, Valenzuela Díaz FR. Organophilic Synthetic Stevensite-Zn: Synthesis and Characterization, an Alternative Simple Method [Internet]. Minerals. 2022 ; 12 11 .[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/min12121568
Artigo de periodico
Austenite Formation in the Oxidized Layer of Ultra-High-Strength 13Ni15Co10Mo Maraging Steel (2022)
Fonseca, Daniela Passarelo Moura da ; Carvalho, Leandro Gomes de ; Lima, Nelson Batista de ; Padilha, Angelo Fernando
Source: Metals. Unidade: EP
Subjects: OXIDAÇÃO, ALTA TEMPERATURA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FONSECA, Daniela Passarelo Moura da et al. Austenite Formation in the Oxidized Layer of Ultra-High-Strength 13Ni15Co10Mo Maraging Steel. Metals, v. 12, n. 12, p. 2115. 1-10, 2022Tradução . . Disponível em: https://doi.org/10.3390/met12122115. Acesso em: 14 nov. 2024.
APA
Fonseca, D. P. M. da, Carvalho, L. G. de, Lima, N. B. de, & Padilha, A. F. (2022). Austenite Formation in the Oxidized Layer of Ultra-High-Strength 13Ni15Co10Mo Maraging Steel. Metals, 12( 12), 2115. 1-10. doi:10.3390/met12122115
NLM
Fonseca DPM da, Carvalho LG de, Lima NB de, Padilha AF. Austenite Formation in the Oxidized Layer of Ultra-High-Strength 13Ni15Co10Mo Maraging Steel [Internet]. Metals. 2022 ; 12( 12): 2115. 1-10.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met12122115
Vancouver
Fonseca DPM da, Carvalho LG de, Lima NB de, Padilha AF. Austenite Formation in the Oxidized Layer of Ultra-High-Strength 13Ni15Co10Mo Maraging Steel [Internet]. Metals. 2022 ; 12( 12): 2115. 1-10.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met12122115
Artigo de periodico
Modeling the Effect of Compressive Stress on Hysteresis Loop of Grain-Oriented Electrical Steel (2022)
Dias, Mateus Botani de Souza ; Landgraf, Fernando José Gomes ; Chwastek, Krzystof
Source: Energies. Unidade: EP
Subjects: AÇO ELÉTRICO, ELETROMAGNETISMO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIAS, Mateus Botani de Souza e LANDGRAF, Fernando José Gomes e CHWASTEK, Krzystof. Modeling the Effect of Compressive Stress on Hysteresis Loop of Grain-Oriented Electrical Steel. Energies, v. 15, n. 3, p. 21, 2022Tradução . . Disponível em: https://doi.org/10.3390/en15031128. Acesso em: 14 nov. 2024.
APA
Dias, M. B. de S., Landgraf, F. J. G., & Chwastek, K. (2022). Modeling the Effect of Compressive Stress on Hysteresis Loop of Grain-Oriented Electrical Steel. Energies, 15( 3), 21. doi:10.3390/en15031128
NLM
Dias MB de S, Landgraf FJG, Chwastek K. Modeling the Effect of Compressive Stress on Hysteresis Loop of Grain-Oriented Electrical Steel [Internet]. Energies. 2022 ; 15( 3): 21.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/en15031128
Vancouver
Dias MB de S, Landgraf FJG, Chwastek K. Modeling the Effect of Compressive Stress on Hysteresis Loop of Grain-Oriented Electrical Steel [Internet]. Energies. 2022 ; 15( 3): 21.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/en15031128
Artigo de periodico
Precipitation Kinetic Analysisin a Maraging 350 Steel UsingKJMA and Austin-Rickett Equations (2022)
Carvalho, Leandro Gomes de ; Plaut, Ronald Lesley ; Padilha, Angelo Fernando
Source: Defect and Diffusion Forum. Unidade: EP
Subjects: CINÉTICA, AÇO, AÇO INOXIDÁVEL MARTENSÍTICO, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Leandro Gomes de e PLAUT, Ronald Lesley e PADILHA, Angelo Fernando. Precipitation Kinetic Analysisin a Maraging 350 Steel UsingKJMA and Austin-Rickett Equations. Defect and Diffusion Forum, v. 422, p. 118-123, 2022Tradução . . Disponível em: https://doi.org/10.4028/p-luf4h8. Acesso em: 14 nov. 2024.
APA
Carvalho, L. G. de, Plaut, R. L., & Padilha, A. F. (2022). Precipitation Kinetic Analysisin a Maraging 350 Steel UsingKJMA and Austin-Rickett Equations. Defect and Diffusion Forum, 422, 118-123. doi:10.4028/p-luf4h8
NLM
Carvalho LG de, Plaut RL, Padilha AF. Precipitation Kinetic Analysisin a Maraging 350 Steel UsingKJMA and Austin-Rickett Equations [Internet]. Defect and Diffusion Forum. 2022 ; 422 118-123.[citado 2024 nov. 14 ] Available from: https://doi.org/10.4028/p-luf4h8
Vancouver
Carvalho LG de, Plaut RL, Padilha AF. Precipitation Kinetic Analysisin a Maraging 350 Steel UsingKJMA and Austin-Rickett Equations [Internet]. Defect and Diffusion Forum. 2022 ; 422 118-123.[citado 2024 nov. 14 ] Available from: https://doi.org/10.4028/p-luf4h8
Artigo de periodico
In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels (2022)
Ariza Echeverri, Edwan Anderson ; Nishikawa, Arthur Seiji ; Masoumi, Mohammad ; Pereira, Henrique Boschetti ; Marulanda, Nelson Granda; Rossy, Andrés Márquez; Goldenstein, Hélio ; Tschiptschin, André Paulo
Source: Metals. Unidade: EP
Subjects: CARBONO, DIFRAÇÃO POR RAIOS X, AÇO DE ALTA RESISTÊNCIA, TÊMPERA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARIZA ECHEVERRI, Edwan Anderson et al. In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels. Metals, v. 12, n. 2, p. 1-47, 2022Tradução . . Disponível em: https://doi.org/10.3390/met12020174. Acesso em: 14 nov. 2024.
APA
Ariza Echeverri, E. A., Nishikawa, A. S., Masoumi, M., Pereira, H. B., Marulanda, N. G., Rossy, A. M., et al. (2022). In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels. Metals, 12( 2), 1-47. doi:10.3390/met12020174
NLM
Ariza Echeverri EA, Nishikawa AS, Masoumi M, Pereira HB, Marulanda NG, Rossy AM, Goldenstein H, Tschiptschin AP. In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels [Internet]. Metals. 2022 ; 12( 2): 1-47.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met12020174
Vancouver
Ariza Echeverri EA, Nishikawa AS, Masoumi M, Pereira HB, Marulanda NG, Rossy AM, Goldenstein H, Tschiptschin AP. In Situ Synchrotron X-ray Diffraction and Microstructural Studies on Cold and Hot Stamping Combined with Quenching & Partitioning Processing for Development of Third-Generation Advanced High Strength Steels [Internet]. Metals. 2022 ; 12( 2): 1-47.[citado 2024 nov. 14 ] Available from: https://doi.org/10.3390/met12020174

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Conference titles

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration