ReP USP - Resultado da busca

Parte de monografia/livro
Development of a testbed for hybrid networked control systems (2014)
Godoy, Eduardo Paciência; Oliveira, Thiago de Almeida; Diniz, Ivando Severino; Porto, Arthur José Vieira
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: WIRELESS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. Development of a testbed for hybrid networked control systems. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2014. v. 6 . p. 209-218. Disponível em: https://repositorio.usp.br/directbitstream/66cdcd3e-a036-4710-a6c7-0d717896f929/prod_022645_sysno_3002273.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Oliveira, T. de A., Diniz, I. S., & Porto, A. J. V. (2014). Development of a testbed for hybrid networked control systems. In ABCM Symposium Series in Mechatronics (Vol. 6 , p. 209-218). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/66cdcd3e-a036-4710-a6c7-0d717896f929/prod_022645_sysno_3002273.pdf
NLM
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. Development of a testbed for hybrid networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2014. p. 209-218.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/66cdcd3e-a036-4710-a6c7-0d717896f929/prod_022645_sysno_3002273.pdf
Vancouver
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. Development of a testbed for hybrid networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2014. p. 209-218.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/66cdcd3e-a036-4710-a6c7-0d717896f929/prod_022645_sysno_3002273.pdf
Trabalho de evento
Design and construction of a novel assisted tool-holder (2013)
Javarez Junior, Laercio; Duduch, Jaime Gilberto; Gonçalves, Andre Motta; Otoboni, José Antônio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: PIEZOELETRICIDADE, SISTEMAS DE CONTROLE, FERRAMENTAS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
JAVAREZ JUNIOR, Laercio et al. Design and construction of a novel assisted tool-holder. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf. Acesso em: 05 jun. 2024.
APA
Javarez Junior, L., Duduch, J. G., Gonçalves, A. M., & Otoboni, J. A. (2013). Design and construction of a novel assisted tool-holder. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
NLM
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Vancouver
Javarez Junior L, Duduch JG, Gonçalves AM, Otoboni JA. Design and construction of a novel assisted tool-holder [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: http://www.abcm.org.br/anais/cobem/2013/_PDF/262.pdf
Trabalho de evento
A testbed for wireless networked control systems based on can and zigbee (2013)
Godoy, Eduardo Paciência; Oliveira, Thiago de Almeida; Diniz, Ivandro Severino; Porto, Arthur José Vieira
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: SENSOR, SISTEMAS DE CONTROLE, PROTOCOLOS DE COMUNICAÇÃO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. A testbed for wireless networked control systems based on can and zigbee. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Oliveira, T. de A., Diniz, I. S., & Porto, A. J. V. (2013). A testbed for wireless networked control systems based on can and zigbee. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
NLM
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Vancouver
Godoy EP, Oliveira T de A, Diniz IS, Porto AJV. A testbed for wireless networked control systems based on can and zigbee [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: http://abcm.org.br/anais/cobem/2013/PDF/2145.pdf
Trabalho de evento
Open loop response identification during non-stationary operation of actively controlled rotating systems (2013)
Felscher, Patrick; Dornbusch, Felix; Markert, Richard; Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering - COBEM. Unidade: EESC
Subjects: ROTOR, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FELSCHER, Patrick et al. Open loop response identification during non-stationary operation of actively controlled rotating systems. 2013, Anais.. Rio de Janeiro, RJ: ABCM, 2013. Disponível em: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf. Acesso em: 05 jun. 2024.
APA
Felscher, P., Dornbusch, F., Markert, R., & Nicoletti, R. (2013). Open loop response identification during non-stationary operation of actively controlled rotating systems. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
NLM
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Vancouver
Felscher P, Dornbusch F, Markert R, Nicoletti R. Open loop response identification during non-stationary operation of actively controlled rotating systems [Internet]. Proceedings of COBEM. 2013 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/b5d139ca-5f87-40dd-b973-84e601fa4a58/OK___trabalho%2020%20-%20Open%20Loop%20Response%20Identification%20During%20Non-Stationary%20Operation%20of%20Actively%20Controlled%20Rotating%20Systems%20%28COBEM%202013%29.pdf
Trabalho de evento
Utilização da manutenção centrada em confiabilidade para análise de falhas em redes de controladores lógicos programáveis (2012)
Souza, Gilberto Francisco Martha de ; Felix, Érico Pessoa; Pinto, Jonatas Henrique Ferreira
Source: Anais. Conference titles: Congresso Nacional de Engenharia Mecânica - CONEM. Unidade: EP
Subjects: CONTROLADORES PROGRAMÁVEIS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOUZA, Gilberto Francisco Martha de e FELIX, Érico Pessoa e PINTO, Jonatas Henrique Ferreira. Utilização da manutenção centrada em confiabilidade para análise de falhas em redes de controladores lógicos programáveis. 2012, Anais.. Rio de Janeiro: ABCM, 2012. Disponível em: https://repositorio.usp.br/directbitstream/7cbaa748-9e77-44c1-8f97-6df489753d17/Souza-2012-utilizacao%20da%20manutencao%20centrada-CONEM.pdf. Acesso em: 05 jun. 2024.
APA
Souza, G. F. M. de, Felix, É. P., & Pinto, J. H. F. (2012). Utilização da manutenção centrada em confiabilidade para análise de falhas em redes de controladores lógicos programáveis. In Anais. Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/7cbaa748-9e77-44c1-8f97-6df489753d17/Souza-2012-utilizacao%20da%20manutencao%20centrada-CONEM.pdf
NLM
Souza GFM de, Felix ÉP, Pinto JHF. Utilização da manutenção centrada em confiabilidade para análise de falhas em redes de controladores lógicos programáveis [Internet]. Anais. 2012 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/7cbaa748-9e77-44c1-8f97-6df489753d17/Souza-2012-utilizacao%20da%20manutencao%20centrada-CONEM.pdf
Vancouver
Souza GFM de, Felix ÉP, Pinto JHF. Utilização da manutenção centrada em confiabilidade para análise de falhas em redes de controladores lógicos programáveis [Internet]. Anais. 2012 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/7cbaa748-9e77-44c1-8f97-6df489753d17/Souza-2012-utilizacao%20da%20manutencao%20centrada-CONEM.pdf
Parte de monografia/livro
Object oriented C++ library IsoAgLib study and implementation from the remote CAN-based distributed control system workbench (2012)
Pereira, Robson Rogério Dutra; Sousa, Rafael Vieira de ; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: C++ (LINGUAGEM DE PROGRAMAÇÃO), AGRICULTURA DE PRECISÃO, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Object oriented C++ library IsoAgLib study and implementation from the remote CAN-based distributed control system workbench. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2012. v. 5. p. 694-705. Disponível em: https://repositorio.usp.br/directbitstream/68039d6b-03e2-4201-9866-69ade0b76158/prod_022574_sysno_3001392.pdf. Acesso em: 05 jun. 2024.
APA
Pereira, R. R. D., Sousa, R. V. de, Porto, A. J. V., & Inamasu, R. Y. (2012). Object oriented C++ library IsoAgLib study and implementation from the remote CAN-based distributed control system workbench. In ABCM Symposium Series in Mechatronics (Vol. 5, p. 694-705). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/68039d6b-03e2-4201-9866-69ade0b76158/prod_022574_sysno_3001392.pdf
NLM
Pereira RRD, Sousa RV de, Porto AJV, Inamasu RY. Object oriented C++ library IsoAgLib study and implementation from the remote CAN-based distributed control system workbench [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2012. p. 694-705.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/68039d6b-03e2-4201-9866-69ade0b76158/prod_022574_sysno_3001392.pdf
Vancouver
Pereira RRD, Sousa RV de, Porto AJV, Inamasu RY. Object oriented C++ library IsoAgLib study and implementation from the remote CAN-based distributed control system workbench [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2012. p. 694-705.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/68039d6b-03e2-4201-9866-69ade0b76158/prod_022574_sysno_3001392.pdf
Parte de monografia/livro
Robustness evaluation of an adaptive control methodology for networked control systems (2012)
Godoy, Eduardo Paciência; Pereira, Robson Rogério Dutra; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, AVALIAÇÃO DE DESEMPENHO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. Robustness evaluation of an adaptive control methodology for networked control systems. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2012. v. 5. . Disponível em: https://repositorio.usp.br/directbitstream/97a6b118-925a-43c6-9209-f94044a6f95c/prod_022660_sysno_3002572.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Pereira, R. R. D., Porto, A. J. V., & Inamasu, R. Y. (2012). Robustness evaluation of an adaptive control methodology for networked control systems. In ABCM Symposium Series in Mechatronics (Vol. 5). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/97a6b118-925a-43c6-9209-f94044a6f95c/prod_022660_sysno_3002572.pdf
NLM
Godoy EP, Pereira RRD, Porto AJV, Inamasu RY. Robustness evaluation of an adaptive control methodology for networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2012. [citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/97a6b118-925a-43c6-9209-f94044a6f95c/prod_022660_sysno_3002572.pdf
Vancouver
Godoy EP, Pereira RRD, Porto AJV, Inamasu RY. Robustness evaluation of an adaptive control methodology for networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2012. [citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/97a6b118-925a-43c6-9209-f94044a6f95c/prod_022660_sysno_3002572.pdf
Parte de monografia/livro
Implementation and evaluation of a can-based distributed control system for variable rate technology in agricultural machinery (2010)
Pereira, Robson Rogério Dutra; Godoy, Eduardo Paciência; Sakai, Rodrigo Martins Romeira; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: MÁQUINAS AGRÍCOLAS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Implementation and evaluation of a can-based distributed control system for variable rate technology in agricultural machinery. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2010. v. 4. p. 460-469. Disponível em: https://repositorio.usp.br/directbitstream/45e3f754-3600-445b-a1a8-e5c8fa59f01a/prod_022572_sysno_3001386.pdf. Acesso em: 05 jun. 2024.
APA
Pereira, R. R. D., Godoy, E. P., Sakai, R. M. R., Porto, A. J. V., & Inamasu, R. Y. (2010). Implementation and evaluation of a can-based distributed control system for variable rate technology in agricultural machinery. In ABCM Symposium Series in Mechatronics (Vol. 4, p. 460-469). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/45e3f754-3600-445b-a1a8-e5c8fa59f01a/prod_022572_sysno_3001386.pdf
NLM
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a can-based distributed control system for variable rate technology in agricultural machinery [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2010. p. 460-469.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/45e3f754-3600-445b-a1a8-e5c8fa59f01a/prod_022572_sysno_3001386.pdf
Vancouver
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a can-based distributed control system for variable rate technology in agricultural machinery [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2010. p. 460-469.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/45e3f754-3600-445b-a1a8-e5c8fa59f01a/prod_022572_sysno_3001386.pdf
Trabalho de evento
Using simulation tools in the development of a networked control systems research platform (2009)
Godoy, Eduardo Paciência; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Assunto: SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e PORTO, Arthur José Vieira e INAMASU, Ricardo Yassushi. Using simulation tools in the development of a networked control systems research platform. 2009, Anais.. Rio de Janeiro: ABCM, 2009. . Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Porto, A. J. V., & Inamasu, R. Y. (2009). Using simulation tools in the development of a networked control systems research platform. In Proceedings of COBEM. Rio de Janeiro: ABCM.
NLM
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ]
Vancouver
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ]
Trabalho de evento
Using simulation tools in the development of a networked control systems research platform (2009)
Godoy, Eduardo Paciência; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: FERRAMENTAS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e PORTO, Arthur José Vieira e INAMASU, Ricardo Yassushi. Using simulation tools in the development of a networked control systems research platform. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Porto, A. J. V., & Inamasu, R. Y. (2009). Using simulation tools in the development of a networked control systems research platform. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
NLM
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
Vancouver
Godoy EP, Porto AJV, Inamasu RY. Using simulation tools in the development of a networked control systems research platform [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ] Available from: http://www.abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_06.pdf
Trabalho de evento
Passivity-based nonlinear observer for dynamic positioning (2009)
Zakartchouk Jr, Alexis; Morishita, Helio Mitio
Source: DINAME 2009 : proceedings. Conference titles: International Symposium on Dynamic Problems of Mechanics. Unidade: EP
Subjects: SISTEMAS DE POSICIONAMENTO DINÂMICO, SISTEMAS DE CONTROLE, FILTROS DE KALMAN
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZAKARTCHOUK JR, Alexis e MORISHITA, Helio Mitio. Passivity-based nonlinear observer for dynamic positioning. 2009, Anais.. Angra dos Reis: ABCM, 2009. Disponível em: https://repositorio.usp.br/directbitstream/72059bfe-e2ee-4fab-885a-adcfd960881a/Morishita-2009-passivity%20based%20ok.pdf. Acesso em: 05 jun. 2024.
APA
Zakartchouk Jr, A., & Morishita, H. M. (2009). Passivity-based nonlinear observer for dynamic positioning. In DINAME 2009 : proceedings. Angra dos Reis: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/72059bfe-e2ee-4fab-885a-adcfd960881a/Morishita-2009-passivity%20based%20ok.pdf
NLM
Zakartchouk Jr A, Morishita HM. Passivity-based nonlinear observer for dynamic positioning [Internet]. DINAME 2009 : proceedings. 2009 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/72059bfe-e2ee-4fab-885a-adcfd960881a/Morishita-2009-passivity%20based%20ok.pdf
Vancouver
Zakartchouk Jr A, Morishita HM. Passivity-based nonlinear observer for dynamic positioning [Internet]. DINAME 2009 : proceedings. 2009 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/72059bfe-e2ee-4fab-885a-adcfd960881a/Morishita-2009-passivity%20based%20ok.pdf
Trabalho de evento
Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery (2009)
Pereira, Robson Rogério Dutra; Godoy, Eduardo Paciência; Sakai, Rodrigo Martins Romeira; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MÁQUINAS AGRÍCOLAS, SISTEMAS DE CONTROLE, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery. 2009, Anais.. Rio de Janeiro, RJ: ABCM, 2009. Disponível em: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf. Acesso em: 05 jun. 2024.
APA
Pereira, R. R. D., Godoy, E. P., Sakai, R. M. R., Porto, A. J. V., & Inamasu, R. Y. (2009). Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery. In Proceedings of COBEM. Rio de Janeiro, RJ: ABCM. Recuperado de http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
NLM
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ] Available from: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
Vancouver
Pereira RRD, Godoy EP, Sakai RMR, Porto AJV, Inamasu RY. Implementation and evaluation of a CAN-Based distributed control system for variable rate technology in agricultural machinery [Internet]. Proceedings of COBEM. 2009 ;[citado 2024 jun. 05 ] Available from: http://abcm.org.br/symposium-series/SSM_Vol4/Section_IV_INDUSTRIAL_INFORMATICS_DISCRETE_AND_HYBRID_SYSTEMS/SSM4_IV_15.pdf
Parte de monografia/livro
Proposal of a can-based distributed control system for variable rate technology in agricultural machinery (2008)
Pereira, Robson Rogério Dutra; Godoy, Eduardo Paciência; Sousa, Rafael Vieira de ; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, MÁQUINAS AGRÍCOLAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Robson Rogério Dutra et al. Proposal of a can-based distributed control system for variable rate technology in agricultural machinery. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2008. v. 3. p. 711-716. Disponível em: https://repositorio.usp.br/directbitstream/56956e2f-2cab-49f9-90d7-c6179c5c6e0f/prod_022569_sysno_3001378.pdf. Acesso em: 05 jun. 2024.
APA
Pereira, R. R. D., Godoy, E. P., Sousa, R. V. de, Porto, A. J. V., & Inamasu, R. Y. (2008). Proposal of a can-based distributed control system for variable rate technology in agricultural machinery. In ABCM Symposium Series in Mechatronics (Vol. 3, p. 711-716). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/56956e2f-2cab-49f9-90d7-c6179c5c6e0f/prod_022569_sysno_3001378.pdf
NLM
Pereira RRD, Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Proposal of a can-based distributed control system for variable rate technology in agricultural machinery [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. p. 711-716.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/56956e2f-2cab-49f9-90d7-c6179c5c6e0f/prod_022569_sysno_3001378.pdf
Vancouver
Pereira RRD, Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Proposal of a can-based distributed control system for variable rate technology in agricultural machinery [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. p. 711-716.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/56956e2f-2cab-49f9-90d7-c6179c5c6e0f/prod_022569_sysno_3001378.pdf
Trabalho de evento
Ferramentas de análise, simulação e projeto de sistemas de controle via redes: uma revisão (2008)
Godoy, Eduardo Paciência; Inamasu, Ricardo Yassushi; Porto, Arthur José Vieira
Source: Anais. Conference titles: Congresso Nacional de Engenharia Mecânica - CONEM. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, CONTROLE ADAPTATIVO, FERRAMENTAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e INAMASU, Ricardo Yassushi e PORTO, Arthur José Vieira. Ferramentas de análise, simulação e projeto de sistemas de controle via redes: uma revisão. 2008, Anais.. Salvador: ABCM, 2008. Disponível em: https://repositorio.usp.br/directbitstream/6db2a2ab-9fca-4ed8-bfec-d53ec1bc0fd9/prod_022812_sysno_3005113.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Inamasu, R. Y., & Porto, A. J. V. (2008). Ferramentas de análise, simulação e projeto de sistemas de controle via redes: uma revisão. In Anais. Salvador: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/6db2a2ab-9fca-4ed8-bfec-d53ec1bc0fd9/prod_022812_sysno_3005113.pdf
NLM
Godoy EP, Inamasu RY, Porto AJV. Ferramentas de análise, simulação e projeto de sistemas de controle via redes: uma revisão [Internet]. Anais. 2008 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/6db2a2ab-9fca-4ed8-bfec-d53ec1bc0fd9/prod_022812_sysno_3005113.pdf
Vancouver
Godoy EP, Inamasu RY, Porto AJV. Ferramentas de análise, simulação e projeto de sistemas de controle via redes: uma revisão [Internet]. Anais. 2008 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/6db2a2ab-9fca-4ed8-bfec-d53ec1bc0fd9/prod_022812_sysno_3005113.pdf
Parte de monografia/livro
Dynamic modelling and hardware-in-the-loop simulation applied to a mechatronic project (2008)
Pedro, Leonardo Marquez; Dias, André Luis; Massaro, Leonardo Cuenca; Caurin, Glauco Augusto de Paula
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: HARDWARE, MECATRÔNICA, MÃO, ROBÔS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEDRO, Leonardo Marquez et al. Dynamic modelling and hardware-in-the-loop simulation applied to a mechatronic project. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2008. v. 3. . . Acesso em: 05 jun. 2024.
APA
Pedro, L. M., Dias, A. L., Massaro, L. C., & Caurin, G. A. de P. (2008). Dynamic modelling and hardware-in-the-loop simulation applied to a mechatronic project. In ABCM Symposium Series in Mechatronics (Vol. 3). Rio de Janeiro: ABCM.
NLM
Pedro LM, Dias AL, Massaro LC, Caurin GA de P. Dynamic modelling and hardware-in-the-loop simulation applied to a mechatronic project. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. [citado 2024 jun. 05 ]
Vancouver
Pedro LM, Dias AL, Massaro LC, Caurin GA de P. Dynamic modelling and hardware-in-the-loop simulation applied to a mechatronic project. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. [citado 2024 jun. 05 ]
Parte de monografia/livro
Verification and validation of an analysis model of can-based networked control systems (2008)
Godoy, Eduardo Paciência; Sousa, Rafael Vieira de ; Porto, Arthur José Vieira
Source: ABCM Symposium Series in Mechatronics. Unidade: EESC
Subjects: SISTEMAS DE CONTROLE, MODELOS MATEMÁTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência e SOUSA, Rafael Vieira de e PORTO, Arthur José Vieira. Verification and validation of an analysis model of can-based networked control systems. ABCM Symposium Series in Mechatronics. Tradução . Rio de Janeiro: ABCM, 2008. v. 3. p. 386-394. Disponível em: https://repositorio.usp.br/directbitstream/98c78b81-f2ed-4a2e-a5ab-b1284f0b9ef7/prod_022570_sysno_3001380.pdf. Acesso em: 05 jun. 2024.
APA
Godoy, E. P., Sousa, R. V. de, & Porto, A. J. V. (2008). Verification and validation of an analysis model of can-based networked control systems. In ABCM Symposium Series in Mechatronics (Vol. 3, p. 386-394). Rio de Janeiro: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/98c78b81-f2ed-4a2e-a5ab-b1284f0b9ef7/prod_022570_sysno_3001380.pdf
NLM
Godoy EP, Sousa RV de, Porto AJV. Verification and validation of an analysis model of can-based networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. p. 386-394.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/98c78b81-f2ed-4a2e-a5ab-b1284f0b9ef7/prod_022570_sysno_3001380.pdf
Vancouver
Godoy EP, Sousa RV de, Porto AJV. Verification and validation of an analysis model of can-based networked control systems [Internet]. In: ABCM Symposium Series in Mechatronics. Rio de Janeiro: ABCM; 2008. p. 386-394.[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/98c78b81-f2ed-4a2e-a5ab-b1284f0b9ef7/prod_022570_sysno_3001380.pdf
Trabalho de evento
Controlling pem fuel cells applying a constant humidity technique (2007)
Martínez Riascos, Luis Alberto; Simões, Marcelo Godoy; Miyagi, Paulo Eigi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: UMIDADE ATMOSFÉRICA (SIMULAÇÃO COMPUTACIONAL), CÉLULAS A COMBUSTÍVEL, SISTEMAS DE CONTROLE, FLUXO DOS LÍQUIDOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARTÍNEZ RIASCOS, Luis Alberto e SIMÕES, Marcelo Godoy e MIYAGI, Paulo Eigi. Controlling pem fuel cells applying a constant humidity technique. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/b4a35f45-685d-4a1d-b04f-72c2a047707b/Miyagi-2007-CONTROLLING%20PEM%20FUEL%20CELLS%20APPLYING-Cobem.pdf. Acesso em: 05 jun. 2024.
APA
Martínez Riascos, L. A., Simões, M. G., & Miyagi, P. E. (2007). Controlling pem fuel cells applying a constant humidity technique. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/b4a35f45-685d-4a1d-b04f-72c2a047707b/Miyagi-2007-CONTROLLING%20PEM%20FUEL%20CELLS%20APPLYING-Cobem.pdf
NLM
Martínez Riascos LA, Simões MG, Miyagi PE. Controlling pem fuel cells applying a constant humidity technique [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/b4a35f45-685d-4a1d-b04f-72c2a047707b/Miyagi-2007-CONTROLLING%20PEM%20FUEL%20CELLS%20APPLYING-Cobem.pdf
Vancouver
Martínez Riascos LA, Simões MG, Miyagi PE. Controlling pem fuel cells applying a constant humidity technique [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/b4a35f45-685d-4a1d-b04f-72c2a047707b/Miyagi-2007-CONTROLLING%20PEM%20FUEL%20CELLS%20APPLYING-Cobem.pdf
Trabalho de evento
Resources allocation control in flexible manufacturing systems using the deadlock avoidance method (2007)
Nakamoto, Francisco Yastami ; Miyagi, Paulo Eigi ; Santos Filho, Diolino Jose dos
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: SISTEMAS DE MANUFATURAS, REDES DE PETRI, SISTEMAS DISCRETOS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NAKAMOTO, Francisco Yastami e MIYAGI, Paulo Eigi e SANTOS FILHO, Diolino Jose dos. Resources allocation control in flexible manufacturing systems using the deadlock avoidance method. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/80ce5e37-8f60-48f7-b09d-61353e12f927/Miyagi-2007-RESOURCES%20ALLOCATION%20CONTROL%20IN%20FLEXIBLE-Cobem.pdf. Acesso em: 05 jun. 2024.
APA
Nakamoto, F. Y., Miyagi, P. E., & Santos Filho, D. J. dos. (2007). Resources allocation control in flexible manufacturing systems using the deadlock avoidance method. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/80ce5e37-8f60-48f7-b09d-61353e12f927/Miyagi-2007-RESOURCES%20ALLOCATION%20CONTROL%20IN%20FLEXIBLE-Cobem.pdf
NLM
Nakamoto FY, Miyagi PE, Santos Filho DJ dos. Resources allocation control in flexible manufacturing systems using the deadlock avoidance method [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/80ce5e37-8f60-48f7-b09d-61353e12f927/Miyagi-2007-RESOURCES%20ALLOCATION%20CONTROL%20IN%20FLEXIBLE-Cobem.pdf
Vancouver
Nakamoto FY, Miyagi PE, Santos Filho DJ dos. Resources allocation control in flexible manufacturing systems using the deadlock avoidance method [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/80ce5e37-8f60-48f7-b09d-61353e12f927/Miyagi-2007-RESOURCES%20ALLOCATION%20CONTROL%20IN%20FLEXIBLE-Cobem.pdf
Trabalho de evento
A real object control system for use in manufacturing telepresence environments (2007)
Oliveira, Claiton de; Galle, Suellen; Palma, Jandira Guenka; Porto, Arthur José Vieira
Source: Proceedings. Conference titles: International Congress of Mechanical Engineering- COBEM. Unidade: EESC
Subjects: MANUFATURA, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Claiton de et al. A real object control system for use in manufacturing telepresence environments. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/6392bf96-9ec2-451c-8dff-8d33391ca2fc/prod_022817_sysno_3005127.pdf. Acesso em: 05 jun. 2024.
APA
Oliveira, C. de, Galle, S., Palma, J. G., & Porto, A. J. V. (2007). A real object control system for use in manufacturing telepresence environments. In Proceedings. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/6392bf96-9ec2-451c-8dff-8d33391ca2fc/prod_022817_sysno_3005127.pdf
NLM
Oliveira C de, Galle S, Palma JG, Porto AJV. A real object control system for use in manufacturing telepresence environments [Internet]. Proceedings. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/6392bf96-9ec2-451c-8dff-8d33391ca2fc/prod_022817_sysno_3005127.pdf
Vancouver
Oliveira C de, Galle S, Palma JG, Porto AJV. A real object control system for use in manufacturing telepresence environments [Internet]. Proceedings. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/6392bf96-9ec2-451c-8dff-8d33391ca2fc/prod_022817_sysno_3005127.pdf
Trabalho de evento
Modeling and analysis of the material entry flow system in a pickling line process using petri net (2007)
Nassar, Marilia Gabriela Viana; Melo, Jose Isidro Garcia ; Miyagi, Paulo Eigi ; Santos Filho, Diolino Jose dos
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: SISTEMAS DE MANUFATURAS, REDES DE PETRI, SISTEMAS DISCRETOS, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASSAR, Marilia Gabriela Viana et al. Modeling and analysis of the material entry flow system in a pickling line process using petri net. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/c155b11b-d90c-42a8-b3b8-0abbb5f03350/Miyagi-2007-MODELING%20AND%20ANALYSING%20OF%20THE%20MATERIAL-Cobem.pdf. Acesso em: 05 jun. 2024.
APA
Nassar, M. G. V., Melo, J. I. G., Miyagi, P. E., & Santos Filho, D. J. dos. (2007). Modeling and analysis of the material entry flow system in a pickling line process using petri net. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/c155b11b-d90c-42a8-b3b8-0abbb5f03350/Miyagi-2007-MODELING%20AND%20ANALYSING%20OF%20THE%20MATERIAL-Cobem.pdf
NLM
Nassar MGV, Melo JIG, Miyagi PE, Santos Filho DJ dos. Modeling and analysis of the material entry flow system in a pickling line process using petri net [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/c155b11b-d90c-42a8-b3b8-0abbb5f03350/Miyagi-2007-MODELING%20AND%20ANALYSING%20OF%20THE%20MATERIAL-Cobem.pdf
Vancouver
Nassar MGV, Melo JIG, Miyagi PE, Santos Filho DJ dos. Modeling and analysis of the material entry flow system in a pickling line process using petri net [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 jun. 05 ] Available from: https://repositorio.usp.br/directbitstream/c155b11b-d90c-42a8-b3b8-0abbb5f03350/Miyagi-2007-MODELING%20AND%20ANALYSING%20OF%20THE%20MATERIAL-Cobem.pdf

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Source title

Conference titles