Menu

Filtros : "Indexado no Scopus" "Journal of the Brazilian Society of Mechanical Sciences and Engineering" Removidos: "Indexado no Inspec" "EAE" "Cerón Muñoz, Hernán Darío" "BUSCAGLIA, GUSTAVO CARLOS" Limpar

Filtros

Refine with date range

1 - 20 (21 records)

  • Artigo de periodico

    Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) (2021)

    Moreira, Tiago Augusto; Duarte, Juliana Pacheco; Nascimento, Francisco Júlio do; Ribatski, Gherhardt

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: TRANSFERÊNCIA DE CALOR, NANOPARTÍCULAS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MOREIRA, Tiago Augusto et al. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 43, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1007/s40430-021-03035-z. Acesso em: 11 out. 2024.

    • APA

      Moreira, T. A., Duarte, J. P., Nascimento, F. J. do, & Ribatski, G. (2021). Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF). Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, 1-16. doi:10.1007/s40430-021-03035-z

    • NLM

      Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-021-03035-z

    • Vancouver

      Moreira TA, Duarte JP, Nascimento FJ do, Ribatski G. Flow boiling heat transfer coefcient of DI water and nanofuids inside microscale channels under conditions near the critical heat fux (CHF) [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021 ; 43 1-16.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-021-03035-z

  • Artigo de periodico

    Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths (2020)

    Marques, Larissa Ferreira ; Rogenski, Josuel Kruppa ; Souza, Leandro Franco de

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: ICMC

    Subjects: CURVATURA CONSTANTE, DINÂMICA DOS FLUÍDOS, VÓRTICES DOS FLUÍDOS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MARQUES, Larissa Ferreira e ROGENSKI, Josuel Kruppa e SOUZA, Leandro Franco de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 42, p. 1-15, 2020Tradução . . Disponível em: https://doi.org/10.1007/s40430-020-02442-y. Acesso em: 11 out. 2024.

    • APA

      Marques, L. F., Rogenski, J. K., & Souza, L. F. de. (2020). Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-15. doi:10.1007/s40430-020-02442-y

    • NLM

      Marques LF, Rogenski JK, Souza LF de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-020-02442-y

    • Vancouver

      Marques LF, Rogenski JK, Souza LF de. Effects of streamwise wall curvature variation on the nonlinear evolution of different Görtler vortices wavelengths [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020 ; 42 1-15.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-020-02442-y

  • Artigo de periodico

    CFD analysis of smoke transport inside an aircraft cargo compartment (2016)

    Papa, Ramon; Andrade, Claudia Regina de; Zaparoli, Edson L; Santos, Luis Carlos de Castro

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: IME

    Assunto: MECÂNICA DOS FLUÍDOS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAPA, Ramon et al. CFD analysis of smoke transport inside an aircraft cargo compartment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 38, n. 2, p. 327-334, 2016Tradução . . Disponível em: https://doi.org/10.1007/s40430-015-0307-7. Acesso em: 11 out. 2024.

    • APA

      Papa, R., Andrade, C. R. de, Zaparoli, E. L., & Santos, L. C. de C. (2016). CFD analysis of smoke transport inside an aircraft cargo compartment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38( 2), 327-334. doi:10.1007/s40430-015-0307-7

    • NLM

      Papa R, Andrade CR de, Zaparoli EL, Santos LC de C. CFD analysis of smoke transport inside an aircraft cargo compartment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 ; 38( 2): 327-334.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-015-0307-7

    • Vancouver

      Papa R, Andrade CR de, Zaparoli EL, Santos LC de C. CFD analysis of smoke transport inside an aircraft cargo compartment [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2016 ; 38( 2): 327-334.[citado 2024 out. 11 ] Available from: https://doi.org/10.1007/s40430-015-0307-7

  • Artigo de periodico

    In-flight collision avoidance controller based only on OS4 embedded sensors (2012)

    Becker, Marcelo; Sampaio, Rafael Coronel Bueno; Bouabdallah, Samir; Perrot, Vincent de; Siegwart, Roland

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: ROBÔS, VTOL

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BECKER, Marcelo et al. In-flight collision avoidance controller based only on OS4 embedded sensors. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 34, n. 3, p. 294-307, 2012Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782012000300010. Acesso em: 11 out. 2024.

    • APA

      Becker, M., Sampaio, R. C. B., Bouabdallah, S., Perrot, V. de, & Siegwart, R. (2012). In-flight collision avoidance controller based only on OS4 embedded sensors. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 34( 3), 294-307. doi:10.1590/s1678-58782012000300010

    • NLM

      Becker M, Sampaio RCB, Bouabdallah S, Perrot V de, Siegwart R. In-flight collision avoidance controller based only on OS4 embedded sensors [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34( 3): 294-307.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000300010

    • Vancouver

      Becker M, Sampaio RCB, Bouabdallah S, Perrot V de, Siegwart R. In-flight collision avoidance controller based only on OS4 embedded sensors [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34( 3): 294-307.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000300010

  • Artigo de periodico

    Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites (2012)

    Trindade, Marcelo Areias; Benjeddou, Ayech

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ATUADORES PIEZELÉTRICOS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      TRINDADE, Marcelo Areias e BENJEDDOU, Ayech. Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 34, p. 352-361, 2012Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782012000500003. Acesso em: 11 out. 2024.

    • APA

      Trindade, M. A., & Benjeddou, A. (2012). Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 34, 352-361. doi:10.1590/s1678-58782012000500003

    • NLM

      Trindade MA, Benjeddou A. Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34 352-361.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000500003

    • Vancouver

      Trindade MA, Benjeddou A. Parametric analysis of effective material properties of thickness-shear piezoelectric macro-fibre composites [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34 352-361.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000500003

  • Artigo de periodico

    Reliability-based design optimization strategies based on FORM: a review (2012)

    Lopez, Rafael Holdorf; Beck, André Teófilo

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: ESTRUTURAS (CONFIABILIDADE), ESTRUTURAS (OTIMIZAÇÃO)

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      LOPEZ, Rafael Holdorf e BECK, André Teófilo. Reliability-based design optimization strategies based on FORM: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 34, n. 4, p. 506-514, 2012Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782012000400012. Acesso em: 11 out. 2024.

    • APA

      Lopez, R. H., & Beck, A. T. (2012). Reliability-based design optimization strategies based on FORM: a review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 34( 4), 506-514. doi:10.1590/s1678-58782012000400012

    • NLM

      Lopez RH, Beck AT. Reliability-based design optimization strategies based on FORM: a review [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34( 4): 506-514.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000400012

    • Vancouver

      Lopez RH, Beck AT. Reliability-based design optimization strategies based on FORM: a review [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012 ; 34( 4): 506-514.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782012000400012

  • Artigo de periodico

    Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties (2011)

    Santos, Heinsten Frederich Leal dos; Trindade, Marcelo Areias

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: PIEZOELETRICIDADE, MODELOS PARA PROCESSOS ESTOCÁSTICOS, VIBRAÇÕES DE MÁQUINAS (CONTROLE)

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SANTOS, Heinsten Frederich Leal dos e TRINDADE, Marcelo Areias. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 33, n. 3, p. 287-301, 2011Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782011000300004. Acesso em: 11 out. 2024.

    • APA

      Santos, H. F. L. dos, & Trindade, M. A. (2011). Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 33( 3), 287-301. doi:10.1590/s1678-58782011000300004

    • NLM

      Santos HFL dos, Trindade MA. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2011 ; 33( 3): 287-301.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782011000300004

    • Vancouver

      Santos HFL dos, Trindade MA. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2011 ; 33( 3): 287-301.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782011000300004

  • Artigo de periodico

    A first attempt towards reliability-based calibration of brazilian structural design codes (2010)

    Beck, André Teófilo; Souza Junior, Antônio Carlos

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assunto: ESTRUTURAS (CONFIABILIDADE)

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BECK, André Teófilo e SOUZA JUNIOR, Antônio Carlos. A first attempt towards reliability-based calibration of brazilian structural design codes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 32, n. 2, p. 119-127, 2010Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782010000200004. Acesso em: 11 out. 2024.

    • APA

      Beck, A. T., & Souza Junior, A. C. (2010). A first attempt towards reliability-based calibration of brazilian structural design codes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32( 2), 119-127. doi:10.1590/s1678-58782010000200004

    • NLM

      Beck AT, Souza Junior AC. A first attempt towards reliability-based calibration of brazilian structural design codes [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 2): 119-127.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000200004

    • Vancouver

      Beck AT, Souza Junior AC. A first attempt towards reliability-based calibration of brazilian structural design codes [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 2): 119-127.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000200004

  • Artigo de periodico

    A micromechanics approach to assess effects of constraint on cleavage fracture toughness: a weibull stress model (2010)

    Ruggieri, Claudio

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EP

    Subjects: MECÂNICA DA FRATURA, FADIGA DOS MATERIAIS, SOLDAGEM (RESISTÊNCIA)

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      RUGGIERI, Claudio. A micromechanics approach to assess effects of constraint on cleavage fracture toughness: a weibull stress model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 32, n. 4, p. 475-488, 2010Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782010000400010. Acesso em: 11 out. 2024.

    • APA

      Ruggieri, C. (2010). A micromechanics approach to assess effects of constraint on cleavage fracture toughness: a weibull stress model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32( 4), 475-488. doi:10.1590/s1678-58782010000400010

    • NLM

      Ruggieri C. A micromechanics approach to assess effects of constraint on cleavage fracture toughness: a weibull stress model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 4): 475-488.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000400010

    • Vancouver

      Ruggieri C. A micromechanics approach to assess effects of constraint on cleavage fracture toughness: a weibull stress model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 4): 475-488.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000400010

  • Artigo de periodico

    An Eulerian immersed boundary method for flow simulations over stationary and moving rigid bodies (2010)

    Góis, Evelise Roman Corbalan; Souza, Leandro Franco de

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: ICMC

    Assunto: MECÂNICA DOS FLUÍDOS COMPUTACIONAL

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GÓIS, Evelise Roman Corbalan e SOUZA, Leandro Franco de. An Eulerian immersed boundary method for flow simulations over stationary and moving rigid bodies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 32, n. 5, p. 477-484, 2010Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782010000500007. Acesso em: 11 out. 2024.

    • APA

      Góis, E. R. C., & Souza, L. F. de. (2010). An Eulerian immersed boundary method for flow simulations over stationary and moving rigid bodies. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32( 5), 477-484. doi:10.1590/s1678-58782010000500007

    • NLM

      Góis ERC, Souza LF de. An Eulerian immersed boundary method for flow simulations over stationary and moving rigid bodies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 5): 477-484.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000500007

    • Vancouver

      Góis ERC, Souza LF de. An Eulerian immersed boundary method for flow simulations over stationary and moving rigid bodies [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 5): 477-484.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000500007

  • Artigo de periodico

    Effectiveness - NTU data and analysis for air conditioning and refrigeration air coils (2010)

    Navarro, Hélio Aparecido; Cabezas Gómez, Luben; Zoghbi Filho, João Roberto Bastos; Ribatski, Gherhardt; Saiz Jabardo, José Maria

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assunto: SISTEMAS DE REFRIGERAÇÃO E AR CONDICIONADO

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      NAVARRO, Hélio Aparecido et al. Effectiveness - NTU data and analysis for air conditioning and refrigeration air coils. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 32, n. 3, p. 218-226, 2010Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782010000300004. Acesso em: 11 out. 2024.

    • APA

      Navarro, H. A., Cabezas Gómez, L., Zoghbi Filho, J. R. B., Ribatski, G., & Saiz Jabardo, J. M. (2010). Effectiveness - NTU data and analysis for air conditioning and refrigeration air coils. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 32( 3), 218-226. doi:10.1590/s1678-58782010000300004

    • NLM

      Navarro HA, Cabezas Gómez L, Zoghbi Filho JRB, Ribatski G, Saiz Jabardo JM. Effectiveness - NTU data and analysis for air conditioning and refrigeration air coils [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 3): 218-226.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000300004

    • Vancouver

      Navarro HA, Cabezas Gómez L, Zoghbi Filho JRB, Ribatski G, Saiz Jabardo JM. Effectiveness - NTU data and analysis for air conditioning and refrigeration air coils [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2010 ; 32( 3): 218-226.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782010000300004

  • Artigo de periodico

    2D laser-based probabilistic motion tracking in urban-like environments (2009)

    Becker, Marcelo; Hall, Richard; Kolski, Sascha; Macek, Kristijan; Siegwart, Roland; Jensen, Björn

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: VEÍCULOS GUIADOS REMOTAMENTE, RASTREAMENTO, AMBIENTES URBANOS, ROBÓTICA, FILTROS DE KALMAN

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BECKER, Marcelo et al. 2D laser-based probabilistic motion tracking in urban-like environments. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 31, n. 2, p. 83-96, 2009Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782009000200001. Acesso em: 11 out. 2024.

    • APA

      Becker, M., Hall, R., Kolski, S., Macek, K., Siegwart, R., & Jensen, B. (2009). 2D laser-based probabilistic motion tracking in urban-like environments. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 31( 2), 83-96. doi:10.1590/s1678-58782009000200001

    • NLM

      Becker M, Hall R, Kolski S, Macek K, Siegwart R, Jensen B. 2D laser-based probabilistic motion tracking in urban-like environments [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2009 ; 31( 2): 83-96.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782009000200001

    • Vancouver

      Becker M, Hall R, Kolski S, Macek K, Siegwart R, Jensen B. 2D laser-based probabilistic motion tracking in urban-like environments [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2009 ; 31( 2): 83-96.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782009000200001

  • Artigo de periodico

    Reliability analysis of I-section steel columns designed according to new brazilian building codes (2008)

    Beck, André Teófilo; Dória, André Santos

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: SEGURANÇA ESTRUTURAL, COLUNAS, ANÁLISE NUMÉRICA, MÉTODO DOS ELEMENTOS FINITOS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      BECK, André Teófilo e DÓRIA, André Santos. Reliability analysis of I-section steel columns designed according to new brazilian building codes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 30, n. 2, p. 152-159, 2008Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782008000200008. Acesso em: 11 out. 2024.

    • APA

      Beck, A. T., & Dória, A. S. (2008). Reliability analysis of I-section steel columns designed according to new brazilian building codes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30( 2), 152-159. doi:10.1590/s1678-58782008000200008

    • NLM

      Beck AT, Dória AS. Reliability analysis of I-section steel columns designed according to new brazilian building codes [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2008 ; 30( 2): 152-159.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782008000200008

    • Vancouver

      Beck AT, Dória AS. Reliability analysis of I-section steel columns designed according to new brazilian building codes [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2008 ; 30( 2): 152-159.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782008000200008

  • Artigo de periodico

    Design of an experimental flutter mount system (2007)

    De Marqui Junior, Carlos; Rebolho, Daniela Cristina; Belo, Eduardo Morgado; Marques, Flávio Donizeti; Tsunaki, Roberto Hideaki

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: AEROELASTICIDADE DE AERONAVES, ESTRUTURAS, TÚNEIS DE VENTO (TESTES)

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DE MARQUI JUNIOR, Carlos et al. Design of an experimental flutter mount system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 29, n. 3, p. 246-252, 2007Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782007000300003. Acesso em: 11 out. 2024.

    • APA

      De Marqui Junior, C., Rebolho, D. C., Belo, E. M., Marques, F. D., & Tsunaki, R. H. (2007). Design of an experimental flutter mount system. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29( 3), 246-252. doi:10.1590/s1678-58782007000300003

    • NLM

      De Marqui Junior C, Rebolho DC, Belo EM, Marques FD, Tsunaki RH. Design of an experimental flutter mount system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2007 ; 29( 3): 246-252.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782007000300003

    • Vancouver

      De Marqui Junior C, Rebolho DC, Belo EM, Marques FD, Tsunaki RH. Design of an experimental flutter mount system [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2007 ; 29( 3): 246-252.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782007000300003

  • Artigo de periodico

    Development of an automated and dedicated measuring system for straightness evaluation (2007)

    Paziani, Fabricio Tadeu; Di Giacomo, Benedito; Tsunaki, Roberto Hideaki

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assunto: ROBÔS INDUSTRIAIS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      PAZIANI, Fabricio Tadeu e DI GIACOMO, Benedito e TSUNAKI, Roberto Hideaki. Development of an automated and dedicated measuring system for straightness evaluation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 29, n. 3, p. 290-298, 2007Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782007000300009. Acesso em: 11 out. 2024.

    • APA

      Paziani, F. T., Di Giacomo, B., & Tsunaki, R. H. (2007). Development of an automated and dedicated measuring system for straightness evaluation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 29( 3), 290-298. doi:10.1590/s1678-58782007000300009

    • NLM

      Paziani FT, Di Giacomo B, Tsunaki RH. Development of an automated and dedicated measuring system for straightness evaluation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2007 ; 29( 3): 290-298.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782007000300009

    • Vancouver

      Paziani FT, Di Giacomo B, Tsunaki RH. Development of an automated and dedicated measuring system for straightness evaluation [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2007 ; 29( 3): 290-298.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782007000300009

  • Artigo de periodico

    Output-only structural identification of random vibrating systems (2006)

    Mucheroni, Mário Francisco; Cardoso, Andréa

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: IDENTIFICAÇÃO DE SISTEMAS, ANÁLISE DE ONDALETAS, ALGORITMOS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MUCHERONI, Mário Francisco e CARDOSO, Andréa. Output-only structural identification of random vibrating systems. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 28, n. Ja/Mar. 2006, p. 99-104, 2006Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782006000100011. Acesso em: 11 out. 2024.

    • APA

      Mucheroni, M. F., & Cardoso, A. (2006). Output-only structural identification of random vibrating systems. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 28( Ja/Mar. 2006), 99-104. doi:10.1590/s1678-58782006000100011

    • NLM

      Mucheroni MF, Cardoso A. Output-only structural identification of random vibrating systems [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2006 ; 28( Ja/Mar. 2006): 99-104.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782006000100011

    • Vancouver

      Mucheroni MF, Cardoso A. Output-only structural identification of random vibrating systems [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2006 ; 28( Ja/Mar. 2006): 99-104.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782006000100011

  • Artigo de periodico

    Identification of flutter parameters for a wing model (2006)

    De Marqui Junior, Carlos; Rebolho, Daniela Cristina; Belo, Eduardo Morgado; Marques, Flávio Donizeti

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: AEROELASTICIDADE DE AERONAVES, IDENTIFICAÇÃO DE SISTEMAS, TÚNEIS DE VENTO

    Versão PublicadaAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DE MARQUI JUNIOR, Carlos et al. Identification of flutter parameters for a wing model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 28, n. 3, p. 339-346, 2006Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782006000300012. Acesso em: 11 out. 2024.

    • APA

      De Marqui Junior, C., Rebolho, D. C., Belo, E. M., & Marques, F. D. (2006). Identification of flutter parameters for a wing model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 28( 3), 339-346. doi:10.1590/s1678-58782006000300012

    • NLM

      De Marqui Junior C, Rebolho DC, Belo EM, Marques FD. Identification of flutter parameters for a wing model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2006 ; 28( 3): 339-346.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782006000300012

    • Vancouver

      De Marqui Junior C, Rebolho DC, Belo EM, Marques FD. Identification of flutter parameters for a wing model [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2006 ; 28( 3): 339-346.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782006000300012

  • Artigo de periodico

    Numerical simulation of fluid flow in CFB risers: a turbulence analysis approach (2005)

    Cabezas Gómez, Luben; Milioli, Fernando Eduardo

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: REATORES DE LEITO FLUIDIFICADO, HIDRODINÂMICA, TURBULÊNCIA, TUBOS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CABEZAS GÓMEZ, Luben e MILIOLI, Fernando Eduardo. Numerical simulation of fluid flow in CFB risers: a turbulence analysis approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 27, n. 2, p. 141-149, 2005Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782005000200006. Acesso em: 11 out. 2024.

    • APA

      Cabezas Gómez, L., & Milioli, F. E. (2005). Numerical simulation of fluid flow in CFB risers: a turbulence analysis approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 27( 2), 141-149. doi:10.1590/s1678-58782005000200006

    • NLM

      Cabezas Gómez L, Milioli FE. Numerical simulation of fluid flow in CFB risers: a turbulence analysis approach [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 141-149.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200006

    • Vancouver

      Cabezas Gómez L, Milioli FE. Numerical simulation of fluid flow in CFB risers: a turbulence analysis approach [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 141-149.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200006

  • Artigo de periodico

    Application of time-delay neural and recurrent neural networks for the identification of a hingeless helicopter blade flapping and torsion motions (2005)

    Marques, Flávio Donizeti; Souza, Luciane de Fátima Rodrigues de; Rebolho, Daniela Cristina; Caporali, Alexandre Simião; Belo, Eduardo Morgado; Ortolan, Rodrigo Lício

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Subjects: HELICÓPTEROS, REDES NEURAIS, IDENTIFICAÇÃO DE SISTEMAS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MARQUES, Flávio Donizeti et al. Application of time-delay neural and recurrent neural networks for the identification of a hingeless helicopter blade flapping and torsion motions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 27, n. 2, p. 97-103, 2005Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782005000200001. Acesso em: 11 out. 2024.

    • APA

      Marques, F. D., Souza, L. de F. R. de, Rebolho, D. C., Caporali, A. S., Belo, E. M., & Ortolan, R. L. (2005). Application of time-delay neural and recurrent neural networks for the identification of a hingeless helicopter blade flapping and torsion motions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 27( 2), 97-103. doi:10.1590/s1678-58782005000200001

    • NLM

      Marques FD, Souza L de FR de, Rebolho DC, Caporali AS, Belo EM, Ortolan RL. Application of time-delay neural and recurrent neural networks for the identification of a hingeless helicopter blade flapping and torsion motions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 97-103.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200001

    • Vancouver

      Marques FD, Souza L de FR de, Rebolho DC, Caporali AS, Belo EM, Ortolan RL. Application of time-delay neural and recurrent neural networks for the identification of a hingeless helicopter blade flapping and torsion motions [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 97-103.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200001

  • Artigo de periodico

    Synthesization of thermally induced errors in coordinate measuring machines (2005)

    Valdés Arencibia, Rosenda; Di Giacomo, Benedito; Paziani, Fabricio Tadeu

    Source: Journal of the Brazilian Society of Mechanical Sciences and Engineering. Unidade: EESC

    Assunto: MEDIÇÃO A TRÊS

    Acesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VALDÉS ARENCIBIA, Rosenda e DI GIACOMO, Benedito e PAZIANI, Fabricio Tadeu. Synthesization of thermally induced errors in coordinate measuring machines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 27, n. 2, p. 170-177, 2005Tradução . . Disponível em: https://doi.org/10.1590/s1678-58782005000200009. Acesso em: 11 out. 2024.

    • APA

      Valdés Arencibia, R., Di Giacomo, B., & Paziani, F. T. (2005). Synthesization of thermally induced errors in coordinate measuring machines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 27( 2), 170-177. doi:10.1590/s1678-58782005000200009

    • NLM

      Valdés Arencibia R, Di Giacomo B, Paziani FT. Synthesization of thermally induced errors in coordinate measuring machines [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 170-177.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200009

    • Vancouver

      Valdés Arencibia R, Di Giacomo B, Paziani FT. Synthesization of thermally induced errors in coordinate measuring machines [Internet]. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2005 ; 27( 2): 170-177.[citado 2024 out. 11 ] Available from: https://doi.org/10.1590/s1678-58782005000200009

1 - 20 (21 records)

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024