ReP USP - Resultado da busca

Artigo de periodico
Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys (2023)
Paula, Angel Felipe Magnossão; Borges, Doris Feijó Leão; Silva, Felipe Carneiro da ; Rossino, Luciana Sgarbi; Manfrinato, Marcos Dorigão ; Verma, Vikas; Luna-Domínguez, Jorge Humberto; Magnabosco, Rodrigo ; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, ABRASÃO, TRIBOLOGIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAULA, Angel Felipe Magnossão et al. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, v. 524-525, p. 16 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204867. Acesso em: 12 nov. 2024.
APA
Paula, A. F. M., Borges, D. F. L., Silva, F. C. da, Rossino, L. S., Manfrinato, M. D., Verma, V., et al. (2023). Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys. Wear, 524-525, 16 . doi:10.1016/j.wear.2023.204867
NLM
Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2023.204867
Vancouver
Paula AFM, Borges DFL, Silva FC da, Rossino LS, Manfrinato MD, Verma V, Luna-Domínguez JH, Magnabosco R, Schön CG, Cozza RC. Synergism between tribological parameters-micro abrasive concentration level, "micro-abrasive concentration level", micro-abrasive particle type", and ",iquid type" of a micro-abrasive slurry compositition on the micro-abrasive wear behaviour of Fe-30Al-6Cr (at.%) iron aluminide alloys [Internet]. Wear. 2023 ; 524-525 16 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2023.204867
Artigo de periodico
On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles (2023)
Romero, Manuelle Corbani; Mello, Valdicleide; Boher, Christine; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Unidade: EP
Subjects: REVESTIMENTOS, COBALTO, NANOCOMPOSITOS, NANOPARTÍCULAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, Manuelle Corbani et al. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, v. 522, p. 8 , 2023Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2023.204835. Acesso em: 12 nov. 2024.
APA
Romero, M. C., Mello, V., Boher, C., Tschiptschin, A. P., & Scandian, C. (2023). On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles. Wear, 522, 8 . doi:10.1016/j.wear.2023.204835
NLM
Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2023.204835
Vancouver
Romero MC, Mello V, Boher C, Tschiptschin AP, Scandian C. On the tribological behavior of cobalt-based nanocomposite coatings containing ZnO@Graphene oxide core-shell nanoparticles [Internet]. Wear. 2023 ; 522 8 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2023.204835
Artigo de periodico
Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis (2022)
Pereira, Henrique Boschetti ; Alves, Luiz Henrique Dias ; Rezende, Andrei Bavaresco ; Mei, Paulo Roberto ; Goldenstein, Hélio
Source: Wear. Unidade: EP
Subjects: FADIGA DOS MATERIAIS, FERROVIAS, AÇO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Henrique Boschetti et al. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, v. 498-499, n. Ju, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2022.204299. Acesso em: 12 nov. 2024.
APA
Pereira, H. B., Alves, L. H. D., Rezende, A. B., Mei, P. R., & Goldenstein, H. (2022). Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis. Wear, 498-499( Ju), 11 . doi:10.1016/j.wear.2022.204299
NLM
Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2022.204299
Vancouver
Pereira HB, Alves LHD, Rezende AB, Mei PR, Goldenstein H. Influence of the microstructure on the rolling contact fatigue of rail steel: Spheroidized pearlite and fully pearlitic microstructure analysis [Internet]. Wear. 2022 ; 498-499( Ju): 11 .[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2022.204299
Artigo de periodico
Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” (2021)
Macedo, Marcelo de Matos; Luna-Domínguez, Jorge Humberto; Verma, Vikas; Schön, Cláudio Geraldo ; Cozza, Ronaldo Câmara
Source: Wear. Unidade: EP
Subjects: AÇO FERRAMENTA, DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Marcelo de Matos et al. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, v. 476, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2021.203664. Acesso em: 12 nov. 2024.
APA
Macedo, M. de M., Luna-Domínguez, J. H., Verma, V., Schön, C. G., & Cozza, R. C. (2021). Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force”. Wear, 476. doi:10.1016/j.wear.2021.203664
NLM
Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2021.203664
Vancouver
Macedo M de M, Luna-Domínguez JH, Verma V, Schön CG, Cozza RC. Assessment of micro-abrasive wear tribological properties of H10 tool-steel under conditions of “constant normal force ⇒ variable pressure” and “constant pressure ⇒ variable normal force” [Internet]. Wear. 2021 ; 476[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2021.203664
Artigo de periodico
Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels (2020)
Silva, Carlos Alberto da; Varela, Luis Bernardo; Kolawole, Funsho Olaitan ; Tschiptschin, André Paulo ; Panossian, Zehbour
Source: Wear. Unidade: EP
Subjects: CORROSÃO, AÇO CARBONO, EROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Carlos Alberto da et al. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, v. 452–453, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203282. Acesso em: 12 nov. 2024.
APA
Silva, C. A. da, Varela, L. B., Kolawole, F. O., Tschiptschin, A. P., & Panossian, Z. (2020). Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels. Wear, 452–453. doi:10.1016/j.wear.2020.203282
NLM
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2020.203282
Vancouver
Silva CA da, Varela LB, Kolawole FO, Tschiptschin AP, Panossian Z. Multiphase-flow-induced corrosion and cavitation-erosion damages of API 5L X80 and API 5DP grade S steels [Internet]. Wear. 2020 ;452–453[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2020.203282
Artigo de periodico
Improvement in the wear resistance of a hypereutectoid rail via heat treatment (2020)
Tressia, Gustavo; Sinatora, Amilton ; Goldenstein, Hélio ; Masoumi, Mohammad
Source: Wear. Unidade: EP
Subjects: DESGASTE, FADIGA DAS ESTRUTURAS, FERROVIAS, AÇO, TRILHOS, TRATAMENTO TÉRMICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TRESSIA, Gustavo et al. Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, v. 442–443, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.203122. Acesso em: 12 nov. 2024.
APA
Tressia, G., Sinatora, A., Goldenstein, H., & Masoumi, M. (2020). Improvement in the wear resistance of a hypereutectoid rail via heat treatment. Wear, 442–443. doi:10.1016/j.wear.2019.203122
NLM
Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.203122
Vancouver
Tressia G, Sinatora A, Goldenstein H, Masoumi M. Improvement in the wear resistance of a hypereutectoid rail via heat treatment [Internet]. Wear. 2020 ; 442–443[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.203122
Artigo de periodico
Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time (2020)
Calderon-Hernández, José Wilmar ; Sinatora, Amilton ; Melo, Hercílio Gomes de ; Chaves, Arthur Pinto ; Mano, Eliana Satiko ; Leal Filho, Laurindo de Salles ; Paiva, José Luís de ; Braga, André Soares; Pinto, Thiago César de Souza
Source: Wear. Unidade: EP
Subjects: MINÉRIOS, EROSÃO, CORROSÃO, DESGASTE DOS MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CALDERON-HERNÁNDEZ, José Wilmar et al. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, v. 450–451, p. 1-13, 2020Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2020.203272. Acesso em: 12 nov. 2024.
APA
Calderon-Hernández, J. W., Sinatora, A., Melo, H. G. de, Chaves, A. P., Mano, E. S., Leal Filho, L. de S., et al. (2020). Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time. Wear, 450–451, 1-13. doi:10.1016/j.wear.2020.203272
NLM
Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2020.203272
Vancouver
Calderon-Hernández JW, Sinatora A, Melo HG de, Chaves AP, Mano ES, Leal Filho L de S, Paiva JL de, Braga AS, Pinto TC de S. Hydraulic convey of iron ore slurry: pipeline wear and ore particle degradation in function of pumping time [Internet]. Wear. 2020 ;450–451 1-13.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2020.203272
Artigo de periodico
Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels (2019)
Umemura, Milena Tosti; Varela Jiménez, Luis Bernardo ; Pinedo, Carlos Eduardo ; Cozza, Ronaldo Câmara ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: DESGASTE ABRASIVO, AÇO INOXIDÁVEL FERRÍTICO, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
UMEMURA, Milena Tosti et al. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels. Wear, v. 426–427, p. 49-58, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2018.12.092. Acesso em: 12 nov. 2024.
APA
Umemura, M. T., Varela Jiménez, L. B., Pinedo, C. E., Cozza, R. C., & Tschiptschin, A. P. (2019). Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels. Wear, 426–427, 49-58. doi:10.1016/j.wear.2018.12.092
NLM
Umemura MT, Varela Jiménez LB, Pinedo CE, Cozza RC, Tschiptschin AP. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels [Internet]. Wear. 2019 ;426–427 49-58.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.12.092
Vancouver
Umemura MT, Varela Jiménez LB, Pinedo CE, Cozza RC, Tschiptschin AP. Assessment of tribological properties of plasma nitrided 410S ferritic-martensitic stainless steels [Internet]. Wear. 2019 ;426–427 49-58.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.12.092
Trabalho de evento-anais periodico
Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments (2019)
Romero, M C; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Conference titles: International Conference on Wear of Materials. Unidade: EP
Subjects: EROSÃO, CAVITAÇÃO, DESGASTE, FADIGA DAS ESTRUTURAS, COBALTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, M C e TSCHIPTSCHIN, André Paulo e SCANDIAN, Cherlio. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.wear.2018.12.044. Acesso em: 12 nov. 2024. , 2019
APA
Romero, M. C., Tschiptschin, A. P., & Scandian, C. (2019). Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. doi:10.1016/j.wear.2018.12.044
NLM
Romero MC, Tschiptschin AP, Scandian C. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments [Internet]. Wear. 2019 ; 426–427 518-526.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.12.044
Vancouver
Romero MC, Tschiptschin AP, Scandian C. Cavitation erosion resistance of a non-standard cast cobalt alloy:Influence of solubilizing and cold working treatments [Internet]. Wear. 2019 ; 426–427 518-526.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.12.044
Artigo de periodico
Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials (2019)
Almeida, Leandro Prates Ferreira de ; Falqueto, Leandro Entringer ; Goldenstein, Hélio ; Bozzi, Antonio Cesar ; Scandian, Cherlio
Source: Wear. Unidade: EP
Subjects: DESGASTE, ATRITO, FRICÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Leandro Prates Ferreira de et al. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, v. 432-433, p. 1-10, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2019.05.009. Acesso em: 12 nov. 2024.
APA
Almeida, L. P. F. de, Falqueto, L. E., Goldenstein, H., Bozzi, A. C., & Scandian, C. (2019). Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials. Wear, 432-433, 1-10. doi:10.1016/j.wear.2019.05.009
NLM
Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009
Vancouver
Almeida LPF de, Falqueto LE, Goldenstein H, Bozzi AC, Scandian C. Study of sliding wear of the wheel flange - Rail gauge corner contact conditions: Comparative between cast and forged steel wheel materials [Internet]. Wear. 2019 ; 432-433 1-10.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.05.009
Trabalho de evento-anais periodico
Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance (2019)
Romero, M C; Tschiptschin, André Paulo ; Scandian, Cherlio
Source: Wear. Conference titles: International Conference on Wear of Materials. Unidade: EP
Subjects: COBALTO, EROSÃO, PLASMA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ROMERO, M C e TSCHIPTSCHIN, André Paulo e SCANDIAN, Cherlio. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. Disponível em: https://doi.org/10.1016/j.wear.2019.01.019. Acesso em: 12 nov. 2024. , 2019
APA
Romero, M. C., Tschiptschin, A. P., & Scandian, C. (2019). Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance. Wear. Amsterdam: Escola Politécnica, Universidade de São Paulo. doi:10.1016/j.wear.2019.01.019
NLM
Romero MC, Tschiptschin AP, Scandian C. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance [Internet]. Wear. 2019 ; 426–427 581-588.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.01.019
Vancouver
Romero MC, Tschiptschin AP, Scandian C. Low temperature plasma nitriding of a Co30Cr19Fe alloy for improving cavitation erosion resistance [Internet]. Wear. 2019 ; 426–427 581-588.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2019.01.019
Artigo de periodico
Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study (2018)
Santos Filho, Diolino Jose dos ; Tschiptschin, André Paulo ; Goldenstein, Hélio
Source: Wear. Unidade: EP
Subjects: ETANOL, DESGASTE DOS MATERIAIS, FERRO FUNDIDO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS FILHO, Diolino Jose dos e TSCHIPTSCHIN, André Paulo e GOLDENSTEIN, Hélio. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, v. 406-407, p. 105-117, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2018.04.003. Acesso em: 12 nov. 2024.
APA
Santos Filho, D. J. dos, Tschiptschin, A. P., & Goldenstein, H. (2018). Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study. Wear, 406-407, 105-117. doi:10.1016/j.wear.2018.04.003
NLM
Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003
Vancouver
Santos Filho DJ dos, Tschiptschin AP, Goldenstein H. Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine–A case study [Internet]. Wear. 2018 ; 406-407 105-117.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2018.04.003
Artigo de periodico
Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms (2017)
Marques, Flávio Parreiras; Bozzi, Antonio Cesar ; Scandian, Cherlio ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: COBALTO, RESISTÊNCIA DOS MATERIAIS, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARQUES, Flávio Parreiras et al. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms. Wear, v. 390-391, p. 176-183, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.07.023. Acesso em: 12 nov. 2024.
APA
Marques, F. P., Bozzi, A. C., Scandian, C., & Tschiptschin, A. P. (2017). Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms. Wear, 390-391, 176-183. doi:10.1016/j.wear.2017.07.023
NLM
Marques FP, Bozzi AC, Scandian C, Tschiptschin AP. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms [Internet]. Wear. 2017 ; 390-391 176-183.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2017.07.023
Vancouver
Marques FP, Bozzi AC, Scandian C, Tschiptschin AP. Microabrasion of three experimental cobalt-chromium alloys: Wear rates and wear mechanisms [Internet]. Wear. 2017 ; 390-391 176-183.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2017.07.023
Artigo de periodico
Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel (2017)
Espitia Sanjuán, Luis Armando ; Dong, Hanshan; Li, Xiao-Ying; Pinedo, Carlos Eduardo ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: ALTA TEMPERATURA, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESPITIA SANJUÁN, Luis Armando et al. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, v. 376–377, p. 30-36, 2017Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2017.01.091. Acesso em: 12 nov. 2024.
APA
Espitia Sanjuán, L. A., Dong, H., Li, X. -Y., Pinedo, C. E., & Tschiptschin, A. P. (2017). Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, 376–377, 30-36. doi:10.1016/j.wear.2017.01.091
NLM
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2017 ; 376–377 30-36.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2017.01.091
Vancouver
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2017 ; 376–377 30-36.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2017.01.091
Artigo de periodico
Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique (2015)
Araujo, Juliano Avelar; Araujo, Gisela Marques ; Souza, Roberto Martins de ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: TRIBOLOGIA, DIFRAÇÃO POR RAIOS X
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ARAUJO, Juliano Avelar et al. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique. Wear, v. 330-331, p. 469-477, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.01.051. Acesso em: 12 nov. 2024.
APA
Araujo, J. A., Araujo, G. M., Souza, R. M. de, & Tschiptschin, A. P. (2015). Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique. Wear, 330-331, 469-477. doi:10.1016/j.wear.2015.01.051
NLM
Araujo JA, Araujo GM, Souza RM de, Tschiptschin AP. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique [Internet]. Wear. 2015 ; 330-331 469-477.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.01.051
Vancouver
Araujo JA, Araujo GM, Souza RM de, Tschiptschin AP. Effect of periodicity on hardness and scratch resistance of CrN/NbN nanoscale multilayer coating deposited by cathodic arc technique [Internet]. Wear. 2015 ; 330-331 469-477.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.01.051
Artigo de periodico
Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions (2015)
Cozza, Ronaldo Câmara ; Rodrigues, Lucas Cremonese; Schön, Cláudio Geraldo
Source: Wear. Unidade: EP
Subjects: ALTA TEMPERATURA, DESGASTE ABRASIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COZZA, Ronaldo Câmara e RODRIGUES, Lucas Cremonese e SCHÖN, Cláudio Geraldo. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions. Wear, v. 330-331, p. 250-260, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.02.021. Acesso em: 12 nov. 2024.
APA
Cozza, R. C., Rodrigues, L. C., & Schön, C. G. (2015). Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions. Wear, 330-331, 250-260. doi:10.1016/j.wear.2015.02.021
NLM
Cozza RC, Rodrigues LC, Schön CG. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions [Internet]. Wear. 2015 ; 330-331 250-260.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.02.021
Vancouver
Cozza RC, Rodrigues LC, Schön CG. Analysis of the micro-abrasive wear behavior of an iron aluminide alloy under ambient and high-temperature conditions [Internet]. Wear. 2015 ; 330-331 250-260.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.02.021
Artigo de periodico
Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel (2015)
Espitia Sanjuán, Luis Armando ; Dong, Hanshan; Li, Xiao-Ying; Pinedo, Carlos Eduardo ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: CAVITAÇÃO, EROSÃO, AÇO INOXIDÁVEL MARTENSÍTICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESPITIA SANJUÁN, Luis Armando et al. Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, v. 332-333, p. 1070-1079, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2014.12.009. Acesso em: 12 nov. 2024.
APA
Espitia Sanjuán, L. A., Dong, H., Li, X. -Y., Pinedo, C. E., & Tschiptschin, A. P. (2015). Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel. Wear, 332-333, 1070-1079. doi:10.1016/j.wear.2014.12.009
NLM
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2015 ; 332-333 1070-1079.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2014.12.009
Vancouver
Espitia Sanjuán LA, Dong H, Li X-Y, Pinedo CE, Tschiptschin AP. Cavitation erosion resistance and wear mechanisms of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel [Internet]. Wear. 2015 ; 332-333 1070-1079.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2014.12.009
Artigo de periodico
Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest (2015)
Rodrigues, Ana Cecília Pontes; Yonamine, Taeko; Albertin, Eduardo ; Sinatora, Amilton ; Azevedo, Cesar Roberto de Farias
Source: Wear. Unidade: EP
Subjects: AÇO, COBRE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RODRIGUES, Ana Cecília Pontes et al. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, v. 330-331, p. 70-78, 2015Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2015.02.006. Acesso em: 12 nov. 2024.
APA
Rodrigues, A. C. P., Yonamine, T., Albertin, E., Sinatora, A., & Azevedo, C. R. de F. (2015). Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest. Wear, 330-331, 70-78. doi:10.1016/j.wear.2015.02.006
NLM
Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006
Vancouver
Rodrigues ACP, Yonamine T, Albertin E, Sinatora A, Azevedo CR de F. Effect of Cu particles as an interfacial media addition on the friction coefficient and interface microstructure during (steel/steel) pin on disc tribotest [Internet]. Wear. 2015 ; 330-331 70-78.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2015.02.006
Artigo de periodico
Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel (2013)
Espitia Sanjuán, Luis Armando ; Varela Jiménez, Luis Bernardo ; Pinedo, Carlos Eduardo ; Tschiptschin, André Paulo
Source: Wear. Unidade: EP
Subjects: AÇO INOXIDÁVEL MARTENSÍTICO, CAVITAÇÃO, DESGASTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ESPITIA SANJUÁN, Luis Armando et al. Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel. Wear, v. 301, n. 1-2, p. 449-456, 2013Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2012.12.029. Acesso em: 12 nov. 2024.
APA
Espitia Sanjuán, L. A., Varela Jiménez, L. B., Pinedo, C. E., & Tschiptschin, A. P. (2013). Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel. Wear, 301( 1-2), 449-456. doi:10.1016/j.wear.2012.12.029
NLM
Espitia Sanjuán LA, Varela Jiménez LB, Pinedo CE, Tschiptschin AP. Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel [Internet]. Wear. 2013 ; 301( 1-2): 449-456.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2012.12.029
Vancouver
Espitia Sanjuán LA, Varela Jiménez LB, Pinedo CE, Tschiptschin AP. Cavitation erosion resistance of low temperature plasma nitrided martensitic stainless steel [Internet]. Wear. 2013 ; 301( 1-2): 449-456.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2012.12.029
Artigo de periodico
Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys (2011)
Silva, Wanderson Santana da; Souza, R. M; Mello, J D B; Goldenstein, Hélio
Source: Wear. Unidade: EP
Subjects: TRIBOLOGIA, LIGAS DE ALTA RESISTÊNCIA, LIGAS FUNDIDAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA, Wanderson Santana da et al. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys. Wear, v. 271, n. 9-10, p. 1819-1827, 2011Tradução . . Disponível em: https://doi.org/10.1016/j.wear.2011.02.030. Acesso em: 12 nov. 2024.
APA
Silva, W. S. da, Souza, R. M., Mello, J. D. B., & Goldenstein, H. (2011). Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys. Wear, 271( 9-10), 1819-1827. doi:10.1016/j.wear.2011.02.030
NLM
Silva WS da, Souza RM, Mello JDB, Goldenstein H. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys [Internet]. Wear. 2011 ; 271( 9-10): 1819-1827.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2011.02.030
Vancouver
Silva WS da, Souza RM, Mello JDB, Goldenstein H. Room temperature mechanical properties and tribology of NICRALC and Stellite casting alloys [Internet]. Wear. 2011 ; 271( 9-10): 1819-1827.[citado 2024 nov. 12 ] Available from: https://doi.org/10.1016/j.wear.2011.02.030

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Date published

Subjects

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration