Filtros : "Indexado no INSPEC" "EP-PMT" Removidos: "Imunologia" "FFLCH-FLM" "FOB-BAB" "ANGELO, CLAUDIO FELISONI DE" Limpar

Filtros



Refine with date range


  • Source: Tribology International. Conference titles: Leeds-Lyon Symposium on Tribology. Unidade: EP

    Subjects: TRATAMENTO DE SUPERFÍCIES, DESGASTE DOS MATERIAIS

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RODRIGUES, Ana Cecília Pontes et al. Pin-on-disc tribotests with the addition of Cu particles as an interfacial media: characterization of disc tribosurfaces using SEM-FIB techniques. Tribology International. Amsterdam: Escola Politécnica, Universidade de São Paulo. Disponível em: https://ac.els-cdn.com/S0301679X15005241/1-s2.0-S0301679X15005241-main.pdf?_tid=spdf-d3cfd94e-a1e7-4428-a50c-d7e490f8b59b&acdnat=1519843408_0667976b87b3ca81671f157426e80927. Acesso em: 09 out. 2024. , 2016
    • APA

      Rodrigues, A. C. P., Yonamine, T., Sinatora, A., & Azevedo, C. R. de F. (2016). Pin-on-disc tribotests with the addition of Cu particles as an interfacial media: characterization of disc tribosurfaces using SEM-FIB techniques. Tribology International. Amsterdam: Escola Politécnica, Universidade de São Paulo. doi:10.1016/j.triboint.2016.03.034
    • NLM

      Rodrigues ACP, Yonamine T, Sinatora A, Azevedo CR de F. Pin-on-disc tribotests with the addition of Cu particles as an interfacial media: characterization of disc tribosurfaces using SEM-FIB techniques [Internet]. Tribology International. 2016 ; 100 351-359.[citado 2024 out. 09 ] Available from: https://ac.els-cdn.com/S0301679X15005241/1-s2.0-S0301679X15005241-main.pdf?_tid=spdf-d3cfd94e-a1e7-4428-a50c-d7e490f8b59b&acdnat=1519843408_0667976b87b3ca81671f157426e80927
    • Vancouver

      Rodrigues ACP, Yonamine T, Sinatora A, Azevedo CR de F. Pin-on-disc tribotests with the addition of Cu particles as an interfacial media: characterization of disc tribosurfaces using SEM-FIB techniques [Internet]. Tribology International. 2016 ; 100 351-359.[citado 2024 out. 09 ] Available from: https://ac.els-cdn.com/S0301679X15005241/1-s2.0-S0301679X15005241-main.pdf?_tid=spdf-d3cfd94e-a1e7-4428-a50c-d7e490f8b59b&acdnat=1519843408_0667976b87b3ca81671f157426e80927
  • Source: Sensors & Transducers Journal. Unidades: IAG, EP, IEE

    Assunto: POLÍMEROS (MATERIAIS)

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SANTOS, Emerson Roberto et al. New copolymers containing charge carriers for organic devices with ITO films treated by UV-Ozone using high intensity discharge lamp. Sensors & Transducers Journal, v. 101, n. 2, 2009Tradução . . Acesso em: 09 out. 2024.
    • APA

      Santos, E. R., Correia, F. C., Burini Junior, E. C., Wang, S. H., Yamasoe, M. A., Fonseca, F. J., & Andrade, A. M. de. (2009). New copolymers containing charge carriers for organic devices with ITO films treated by UV-Ozone using high intensity discharge lamp. Sensors & Transducers Journal, 101( 2).
    • NLM

      Santos ER, Correia FC, Burini Junior EC, Wang SH, Yamasoe MA, Fonseca FJ, Andrade AM de. New copolymers containing charge carriers for organic devices with ITO films treated by UV-Ozone using high intensity discharge lamp. Sensors & Transducers Journal. 2009 ;101( 2):[citado 2024 out. 09 ]
    • Vancouver

      Santos ER, Correia FC, Burini Junior EC, Wang SH, Yamasoe MA, Fonseca FJ, Andrade AM de. New copolymers containing charge carriers for organic devices with ITO films treated by UV-Ozone using high intensity discharge lamp. Sensors & Transducers Journal. 2009 ;101( 2):[citado 2024 out. 09 ]
  • Source: Materials Science Forum. Unidade: EP

    Subjects: CIMENTO PORTLAND, CROMO, CURTUME, POLUIÇÃO AMBIENTAL (PREVENÇÃO E CONTROLE), RESÍDUOS SÓLIDOS (REÚSO), RESÍDUOS TÓXICOS

    PrivadoAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PINTO, Carolina Afonso et al. X-ray diffraction study of particulate tannery waste solidified in cement. Materials Science Forum, v. 530-531, p. 478-484, 2006Tradução . . Disponível em: http://www.scientific.net/0-87849-423-5/478/. Acesso em: 09 out. 2024.
    • APA

      Pinto, C. A., Valenzuela Díaz, F. R., Sansalone, J. J., Dweck, J., Cartledge, F. K., & Büchler, P. M. (2006). X-ray diffraction study of particulate tannery waste solidified in cement. Materials Science Forum, 530-531, 478-484. Recuperado de http://www.scientific.net/0-87849-423-5/478/
    • NLM

      Pinto CA, Valenzuela Díaz FR, Sansalone JJ, Dweck J, Cartledge FK, Büchler PM. X-ray diffraction study of particulate tannery waste solidified in cement [Internet]. Materials Science Forum. 2006 ;530-531 478-484.[citado 2024 out. 09 ] Available from: http://www.scientific.net/0-87849-423-5/478/
    • Vancouver

      Pinto CA, Valenzuela Díaz FR, Sansalone JJ, Dweck J, Cartledge FK, Büchler PM. X-ray diffraction study of particulate tannery waste solidified in cement [Internet]. Materials Science Forum. 2006 ;530-531 478-484.[citado 2024 out. 09 ] Available from: http://www.scientific.net/0-87849-423-5/478/
  • Source: Journal of Thermal Analysis and Calorimetry,. Unidade: EP

    Subjects: ÁGUA NATURAL (TRATAMENTO), ANÁLISE TÉRMICA, ARGILAS, POLUIÇÃO DA ÁGUA POR RESÍDUOS INDUSTRIAIS, RESÍDUOS PERIGOSOS

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      VIANNA, Marilda Mendonça Guazzelli Ramos et al. Characterization and study of sorptive properties of differently prepared organoclays from a brazilian natural bentonite. Journal of Thermal Analysis and Calorimetry, v. no 2005, n. 3, p. 595-602, 2005Tradução . . Disponível em: https://doi.org/10.1007/s10973-005-6848-8. Acesso em: 09 out. 2024.
    • APA

      Vianna, M. M. G. R., Dweck, J., Kozievitch, V. de F. J., Valenzuela Díaz, F. R., & Büchler, P. M. (2005). Characterization and study of sorptive properties of differently prepared organoclays from a brazilian natural bentonite. Journal of Thermal Analysis and Calorimetry,, no 2005( 3), 595-602. doi:10.1007/s10973-005-6848-8
    • NLM

      Vianna MMGR, Dweck J, Kozievitch V de FJ, Valenzuela Díaz FR, Büchler PM. Characterization and study of sorptive properties of differently prepared organoclays from a brazilian natural bentonite [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 3): 595-602.[citado 2024 out. 09 ] Available from: https://doi.org/10.1007/s10973-005-6848-8
    • Vancouver

      Vianna MMGR, Dweck J, Kozievitch V de FJ, Valenzuela Díaz FR, Büchler PM. Characterization and study of sorptive properties of differently prepared organoclays from a brazilian natural bentonite [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 3): 595-602.[citado 2024 out. 09 ] Available from: https://doi.org/10.1007/s10973-005-6848-8
  • Source: Journal of Thermal Analysis and Calorimetry,. Unidade: EP

    Subjects: ADSORÇÃO, ANÁLISE TÉRMICA, ARGILAS, EFLUENTES (TRATAMENTO BIOLÓGICO), LATICÍNIOS, POLUIÇÃO (PREVENÇÃO E CONTROLE)

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MORAIS, Leandro Cardoso de et al. Characterization of lactose and derived products in dairy product industry effluents processing. Journal of Thermal Analysis and Calorimetry, v. no 2005, n. 2, p. 315-318, 2005Tradução . . Disponível em: https://doi.org/10.1007/s10973-005-0896-y. Acesso em: 09 out. 2024.
    • APA

      Morais, L. C. de, Dweck, J., Valenzuela Díaz, F. R., & Büchler, P. M. (2005). Characterization of lactose and derived products in dairy product industry effluents processing. Journal of Thermal Analysis and Calorimetry,, no 2005( 2), 315-318. doi:10.1007/s10973-005-0896-y
    • NLM

      Morais LC de, Dweck J, Valenzuela Díaz FR, Büchler PM. Characterization of lactose and derived products in dairy product industry effluents processing [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 2): 315-318.[citado 2024 out. 09 ] Available from: https://doi.org/10.1007/s10973-005-0896-y
    • Vancouver

      Morais LC de, Dweck J, Valenzuela Díaz FR, Büchler PM. Characterization of lactose and derived products in dairy product industry effluents processing [Internet]. Journal of Thermal Analysis and Calorimetry,. 2005 ; no 2005( 2): 315-318.[citado 2024 out. 09 ] Available from: https://doi.org/10.1007/s10973-005-0896-y
  • Source: Applied Surface Science. Unidades: IQ, EP

    Subjects: ADSORÇÃO, FÍSICO-QUÍMICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ESTEVES, Marcos Cramer e GOUVÊA, Douglas e SUMODJO, Paulo Teng An. Effect of fluorine doping on the properties of tin oxide based powders prepared via Pechini's method. Applied Surface Science, v. 229, n. 1-4, p. 24-29, 2004Tradução . . Disponível em: https://doi.org/10.1016/j.apsusc.2004.02.015. Acesso em: 09 out. 2024.
    • APA

      Esteves, M. C., Gouvêa, D., & Sumodjo, P. T. A. (2004). Effect of fluorine doping on the properties of tin oxide based powders prepared via Pechini's method. Applied Surface Science, 229( 1-4), 24-29. doi:10.1016/j.apsusc.2004.02.015
    • NLM

      Esteves MC, Gouvêa D, Sumodjo PTA. Effect of fluorine doping on the properties of tin oxide based powders prepared via Pechini's method [Internet]. Applied Surface Science. 2004 ; 229( 1-4): 24-29.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/j.apsusc.2004.02.015
    • Vancouver

      Esteves MC, Gouvêa D, Sumodjo PTA. Effect of fluorine doping on the properties of tin oxide based powders prepared via Pechini's method [Internet]. Applied Surface Science. 2004 ; 229( 1-4): 24-29.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/j.apsusc.2004.02.015
  • Source: Scripta Materialia. Unidade: EP

    Subjects: ALUMÍNIO, CINÉTICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RIOS, P. R. e PADILHA, Angelo Fernando. Comment on "Microstructural path and temperature dependence of recrystallization in commercial aluminum". Scripta Materialia, v. 48, p. 1561-1564, 2003Tradução . . Disponível em: https://doi.org/10.1016/s1359-6462(03)00055-1. Acesso em: 09 out. 2024.
    • APA

      Rios, P. R., & Padilha, A. F. (2003). Comment on "Microstructural path and temperature dependence of recrystallization in commercial aluminum". Scripta Materialia, 48, 1561-1564. doi:10.1016/s1359-6462(03)00055-1
    • NLM

      Rios PR, Padilha AF. Comment on "Microstructural path and temperature dependence of recrystallization in commercial aluminum" [Internet]. Scripta Materialia. 2003 ;48 1561-1564.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s1359-6462(03)00055-1
    • Vancouver

      Rios PR, Padilha AF. Comment on "Microstructural path and temperature dependence of recrystallization in commercial aluminum" [Internet]. Scripta Materialia. 2003 ;48 1561-1564.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s1359-6462(03)00055-1
  • Source: Journal of Hazardous Materials. Unidade: EP

    Subjects: CROMO, NÍQUEL

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      BARROS, Alexandre Martins e TENÓRIO, Jorge Alberto Soares e ESPINOSA, Denise Crocce Romano. Chloride influence on the incorporation of Cr2O3 and NiO in clinker: a laboratory evaluation. Journal of Hazardous Materials, v. 93, p. 221-232, 2002Tradução . . Disponível em: https://doi.org/10.1016/s0304-3894(02)00032-8. Acesso em: 09 out. 2024.
    • APA

      Barros, A. M., Tenório, J. A. S., & Espinosa, D. C. R. (2002). Chloride influence on the incorporation of Cr2O3 and NiO in clinker: a laboratory evaluation. Journal of Hazardous Materials, 93, 221-232. doi:10.1016/s0304-3894(02)00032-8
    • NLM

      Barros AM, Tenório JAS, Espinosa DCR. Chloride influence on the incorporation of Cr2O3 and NiO in clinker: a laboratory evaluation [Internet]. Journal of Hazardous Materials. 2002 ;93 221-232.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0304-3894(02)00032-8
    • Vancouver

      Barros AM, Tenório JAS, Espinosa DCR. Chloride influence on the incorporation of Cr2O3 and NiO in clinker: a laboratory evaluation [Internet]. Journal of Hazardous Materials. 2002 ;93 221-232.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0304-3894(02)00032-8
  • Source: Journal of Power Sources. Unidade: EP

    Subjects: NÍQUEL, LIGAS METÁLICAS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      TENÓRIO, Jorge Alberto Soares e ESPINOSA, Denise Crocce Romano. Recovery of Ni-based alloys from spent NiMH batteries. Journal of Power Sources, v. 108, p. 70-73, 2002Tradução . . Disponível em: https://doi.org/10.1016/s0378-7753(02)00007-1. Acesso em: 09 out. 2024.
    • APA

      Tenório, J. A. S., & Espinosa, D. C. R. (2002). Recovery of Ni-based alloys from spent NiMH batteries. Journal of Power Sources, 108, 70-73. doi:10.1016/s0378-7753(02)00007-1
    • NLM

      Tenório JAS, Espinosa DCR. Recovery of Ni-based alloys from spent NiMH batteries [Internet]. Journal of Power Sources. 2002 ;108 70-73.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0378-7753(02)00007-1
    • Vancouver

      Tenório JAS, Espinosa DCR. Recovery of Ni-based alloys from spent NiMH batteries [Internet]. Journal of Power Sources. 2002 ;108 70-73.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0378-7753(02)00007-1
  • Source: Molecular Crystals & Liquid Crystals. Unidade: EP

    Subjects: CRISTAIS LÍQUIDOS, TENSÃO DOS MATERIAIS, QUÍMICA

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      SHIMIZU, Renato Norio e DEMARQUETTE, Nicole Raymonde. Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal. Molecular Crystals & Liquid Crystals, v. 374, p. 125-130, 2002Tradução . . Disponível em: https://doi.org/10.1080/02678290110082356. Acesso em: 09 out. 2024.
    • APA

      Shimizu, R. N., & Demarquette, N. R. (2002). Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal. Molecular Crystals & Liquid Crystals, 374, 125-130. doi:10.1080/02678290110082356
    • NLM

      Shimizu RN, Demarquette NR. Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal [Internet]. Molecular Crystals & Liquid Crystals. 2002 ;374 125-130.[citado 2024 out. 09 ] Available from: https://doi.org/10.1080/02678290110082356
    • Vancouver

      Shimizu RN, Demarquette NR. Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal [Internet]. Molecular Crystals & Liquid Crystals. 2002 ;374 125-130.[citado 2024 out. 09 ] Available from: https://doi.org/10.1080/02678290110082356
  • Source: Polymer Engineering and Science. Unidade: EP

    Subjects: PLASMA, MATERIAIS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      COUTO, Elisete et al. Oxygen plasma treatment of sisal fibers and polypropylene : effects on mechanical properties of composites. Polymer Engineering and Science, v. 42, n. 4, p. 790-797, 2002Tradução . . Disponível em: https://doi.org/10.1002/pen.10991. Acesso em: 09 out. 2024.
    • APA

      Couto, E., Tan, I. H., Demarquette, N. R., Caraschi, J. C., & Leão, A. (2002). Oxygen plasma treatment of sisal fibers and polypropylene : effects on mechanical properties of composites. Polymer Engineering and Science, 42( 4), 790-797. doi:10.1002/pen.10991
    • NLM

      Couto E, Tan IH, Demarquette NR, Caraschi JC, Leão A. Oxygen plasma treatment of sisal fibers and polypropylene : effects on mechanical properties of composites [Internet]. Polymer Engineering and Science. 2002 ;42( 4): 790-797.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.10991
    • Vancouver

      Couto E, Tan IH, Demarquette NR, Caraschi JC, Leão A. Oxygen plasma treatment of sisal fibers and polypropylene : effects on mechanical properties of composites [Internet]. Polymer Engineering and Science. 2002 ;42( 4): 790-797.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.10991
  • Source: Polymer Engineering and Science. Unidade: EP

    Subjects: POLÍMEROS (MATERIAIS), BLENDAS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      MACAÚBAS, Paulo Henrique Pierin e DEMARQUETTE, Nicole Raymonde. Time-temperature superposition principle applicability for blends formed of immiscible polymers. Polymer Engineering and Science, v. 42, n. 7, p. 1509-1519, 2002Tradução . . Disponível em: https://doi.org/10.1002/pen.11047. Acesso em: 09 out. 2024.
    • APA

      Macaúbas, P. H. P., & Demarquette, N. R. (2002). Time-temperature superposition principle applicability for blends formed of immiscible polymers. Polymer Engineering and Science, 42( 7), 1509-1519. doi:10.1002/pen.11047
    • NLM

      Macaúbas PHP, Demarquette NR. Time-temperature superposition principle applicability for blends formed of immiscible polymers [Internet]. Polymer Engineering and Science. 2002 ;42( 7): 1509-1519.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.11047
    • Vancouver

      Macaúbas PHP, Demarquette NR. Time-temperature superposition principle applicability for blends formed of immiscible polymers [Internet]. Polymer Engineering and Science. 2002 ;42( 7): 1509-1519.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.11047
  • Source: Journal of Radioanalytical and Nuclear Chemistry. Unidade: EP

    Subjects: URÂNIO, QUÍMICA

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      RODRIGUES, L. S. e ALONSO-FALLEIROS, Neusa e FORBICINI, Christina Aparecida Leão Guedes de Oliveira. Kinetics of the electrodissolution of metallic uranium. Journal of Radioanalytical and Nuclear Chemistry, v. 253, n. 3, p. 511-515, 2002Tradução . . Acesso em: 09 out. 2024.
    • APA

      Rodrigues, L. S., Alonso-Falleiros, N., & Forbicini, C. A. L. G. de O. (2002). Kinetics of the electrodissolution of metallic uranium. Journal of Radioanalytical and Nuclear Chemistry, 253( 3), 511-515.
    • NLM

      Rodrigues LS, Alonso-Falleiros N, Forbicini CALG de O. Kinetics of the electrodissolution of metallic uranium. Journal of Radioanalytical and Nuclear Chemistry. 2002 ;253( 3): 511-515.[citado 2024 out. 09 ]
    • Vancouver

      Rodrigues LS, Alonso-Falleiros N, Forbicini CALG de O. Kinetics of the electrodissolution of metallic uranium. Journal of Radioanalytical and Nuclear Chemistry. 2002 ;253( 3): 511-515.[citado 2024 out. 09 ]
  • Source: Materials Science and Engineering A. Unidade: EP

    Subjects: CINÉTICA, TÂNTALO, MATERIAIS

    How to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      STUWE, H. P. e PADILHA, Angelo Fernando e SICILIANO JUNIOR, Fulvio. Competition between recovery and recrystallization. Materials Science and Engineering A, v. 333, p. 361-367, 2002Tradução . . Acesso em: 09 out. 2024.
    • APA

      Stuwe, H. P., Padilha, A. F., & Siciliano Junior, F. (2002). Competition between recovery and recrystallization. Materials Science and Engineering A, 333, 361-367.
    • NLM

      Stuwe HP, Padilha AF, Siciliano Junior F. Competition between recovery and recrystallization. Materials Science and Engineering A. 2002 ; 333 361-367.[citado 2024 out. 09 ]
    • Vancouver

      Stuwe HP, Padilha AF, Siciliano Junior F. Competition between recovery and recrystallization. Materials Science and Engineering A. 2002 ; 333 361-367.[citado 2024 out. 09 ]
  • Source: Wear. Unidade: EP

    Assunto: FERRO FUNDIDO

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      VELEZ RESTREPO, Juan Manuel et al. Evaluation of abrasive wear of ductile cast iron in single pass pendulum device. Wear, v. 251, p. 1315-1319, 2001Tradução . . Disponível em: https://doi.org/10.1016/s0043-1648(01)00760-8. Acesso em: 09 out. 2024.
    • APA

      Velez Restrepo, J. M., Tanaka, D. K., Sinatora, A., & Tschiptschin, A. P. (2001). Evaluation of abrasive wear of ductile cast iron in single pass pendulum device. Wear, 251, 1315-1319. doi:10.1016/s0043-1648(01)00760-8
    • NLM

      Velez Restrepo JM, Tanaka DK, Sinatora A, Tschiptschin AP. Evaluation of abrasive wear of ductile cast iron in single pass pendulum device [Internet]. Wear. 2001 ; 251 1315-1319.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0043-1648(01)00760-8
    • Vancouver

      Velez Restrepo JM, Tanaka DK, Sinatora A, Tschiptschin AP. Evaluation of abrasive wear of ductile cast iron in single pass pendulum device [Internet]. Wear. 2001 ; 251 1315-1319.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0043-1648(01)00760-8
  • Source: Materials Reserach Bulletin. Unidades: IQ, EP

    Assunto: QUÍMICA INORGÂNICA

    PrivadoAcesso à fonteAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      ANAISSI, Fauze Jacó et al. Characterization and properties of mixed bentonite-vanadium(V) oxide xerogels. Materials Reserach Bulletin, v. 36, n. 1-2, p. 289-306, 2001Tradução . . Disponível em: https://doi.org/10.1016/s0025-5408(01)00496-2. Acesso em: 09 out. 2024.
    • APA

      Anaissi, F. J., Demets, G. J. F., Toma, H. E., Dovidauskas, S., & Vieira Coelho, A. C. (2001). Characterization and properties of mixed bentonite-vanadium(V) oxide xerogels. Materials Reserach Bulletin, 36( 1-2), 289-306. doi:10.1016/s0025-5408(01)00496-2
    • NLM

      Anaissi FJ, Demets GJF, Toma HE, Dovidauskas S, Vieira Coelho AC. Characterization and properties of mixed bentonite-vanadium(V) oxide xerogels [Internet]. Materials Reserach Bulletin. 2001 ; 36( 1-2): 289-306.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0025-5408(01)00496-2
    • Vancouver

      Anaissi FJ, Demets GJF, Toma HE, Dovidauskas S, Vieira Coelho AC. Characterization and properties of mixed bentonite-vanadium(V) oxide xerogels [Internet]. Materials Reserach Bulletin. 2001 ; 36( 1-2): 289-306.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0025-5408(01)00496-2
  • Source: Polymer Engineering and Science. Unidade: EP

    Subjects: ALUMÍNIO, REVESTIMENTO DE SUPERFÍCIES

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      DEMARQUETTE, Nicole Raymonde et al. Surface tension of polyethylene used in thermal coating. Polymer Engineering and Science, v. 40, n. 7, p. 1663-1671, 2000Tradução . . Disponível em: https://doi.org/10.1002/pen.11298. Acesso em: 09 out. 2024.
    • APA

      Demarquette, N. R., Silva, F. T., Brandi, S. D., & Gouvêa, D. (2000). Surface tension of polyethylene used in thermal coating. Polymer Engineering and Science, 40( 7), 1663-1671. doi:10.1002/pen.11298
    • NLM

      Demarquette NR, Silva FT, Brandi SD, Gouvêa D. Surface tension of polyethylene used in thermal coating [Internet]. Polymer Engineering and Science. 2000 ; 40( 7): 1663-1671.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.11298
    • Vancouver

      Demarquette NR, Silva FT, Brandi SD, Gouvêa D. Surface tension of polyethylene used in thermal coating [Internet]. Polymer Engineering and Science. 2000 ; 40( 7): 1663-1671.[citado 2024 out. 09 ] Available from: https://doi.org/10.1002/pen.11298
  • Source: Materials Science and Technology. Unidade: EP

    Assunto: MATERIAIS FERROSOS

    Acesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      PADILHA, Angelo Fernando e DUTRA, Júlio César e RANDLE, V. Interaction between precipitation normal grain growth, and secondary recrystallisation in austenite stainless steel containing particles. Materials Science and Technology, v. 15, n. 9, p. 1009-1014, 1999Tradução . . Disponível em: https://doi.org/10.1179/026708399101506850. Acesso em: 09 out. 2024.
    • APA

      Padilha, A. F., Dutra, J. C., & Randle, V. (1999). Interaction between precipitation normal grain growth, and secondary recrystallisation in austenite stainless steel containing particles. Materials Science and Technology, 15( 9), 1009-1014. doi:10.1179/026708399101506850
    • NLM

      Padilha AF, Dutra JC, Randle V. Interaction between precipitation normal grain growth, and secondary recrystallisation in austenite stainless steel containing particles [Internet]. Materials Science and Technology. 1999 ; 15( 9): 1009-1014.[citado 2024 out. 09 ] Available from: https://doi.org/10.1179/026708399101506850
    • Vancouver

      Padilha AF, Dutra JC, Randle V. Interaction between precipitation normal grain growth, and secondary recrystallisation in austenite stainless steel containing particles [Internet]. Materials Science and Technology. 1999 ; 15( 9): 1009-1014.[citado 2024 out. 09 ] Available from: https://doi.org/10.1179/026708399101506850
  • Source: Wear. Unidade: EP

    Assunto: POLÍMEROS (MATERIAIS)

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
    • ABNT

      AL-RUBAIE, Kassim S. e GOLDENSTEIN, Hélio e MELLO, José Daniel Biasoli de. Three-body abrasion of Al-SiC composites. Wear, v. 225, n. 1, p. 163-173, 1999Tradução . . Disponível em: https://doi.org/10.1016/s0043-1648(99)00009-5. Acesso em: 09 out. 2024.
    • APA

      Al-Rubaie, K. S., Goldenstein, H., & Mello, J. D. B. de. (1999). Three-body abrasion of Al-SiC composites. Wear, 225( 1), 163-173. doi:10.1016/s0043-1648(99)00009-5
    • NLM

      Al-Rubaie KS, Goldenstein H, Mello JDB de. Three-body abrasion of Al-SiC composites [Internet]. Wear. 1999 ; 225( 1): 163-173.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0043-1648(99)00009-5
    • Vancouver

      Al-Rubaie KS, Goldenstein H, Mello JDB de. Three-body abrasion of Al-SiC composites [Internet]. Wear. 1999 ; 225( 1): 163-173.[citado 2024 out. 09 ] Available from: https://doi.org/10.1016/s0043-1648(99)00009-5

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024