ReP USP - Resultado da busca

Trabalho de evento
Probabilistic inspection planning for the life cycle management of railway bridges (2024)
Ames, Isabela; Bittencourt, Túlio Nogueira; Futai, Marcos Massao; Beck, André Teófilo; Carvalho, H.
Source: Proceedings. Conference titles: International Conference on Bridge Maintenance, Safety and Management - IABMAS. Unidades: EESC, EP
Assunto: ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AMES, Isabela et al. Probabilistic inspection planning for the life cycle management of railway bridges. 2024, Anais.. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2024. Disponível em: http://dx.doi.org/10.1201/9781003483755-332. Acesso em: 03 out. 2024.
APA
Ames, I., Bittencourt, T. N., Futai, M. M., Beck, A. T., & Carvalho, H. (2024). Probabilistic inspection planning for the life cycle management of railway bridges. In Proceedings. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.1201/9781003483755-332
NLM
Ames I, Bittencourt TN, Futai MM, Beck AT, Carvalho H. Probabilistic inspection planning for the life cycle management of railway bridges [Internet]. Proceedings. 2024 ;[citado 2024 out. 03 ] Available from: http://dx.doi.org/10.1201/9781003483755-332
Vancouver
Ames I, Bittencourt TN, Futai MM, Beck AT, Carvalho H. Probabilistic inspection planning for the life cycle management of railway bridges [Internet]. Proceedings. 2024 ;[citado 2024 out. 03 ] Available from: http://dx.doi.org/10.1201/9781003483755-332
Trabalho de evento-resumo
Development of risk-management approach in additive manufacturing of orthopedic implants (2024)
Lirio, Adriana Cogo Malgueiro ; Pinto, Terezinha de Jesus Andreoli
Source: Proceedings. Conference titles: World Congress on Recent Advances in Nanotechnology/RAN. Unidade: FCF
Subjects: MANUFATURA ADITIVA, ORTOPEDIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LIRIO, Adriana Cogo Malgueiro e PINTO, Terezinha de Jesus Andreoli. Development of risk-management approach in additive manufacturing of orthopedic implants. 2024, Anais.. London: International Aset Inc., 2024. Disponível em: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf. Acesso em: 03 out. 2024.
APA
Lirio, A. C. M., & Pinto, T. de J. A. (2024). Development of risk-management approach in additive manufacturing of orthopedic implants. In Proceedings. London: International Aset Inc. Recuperado de https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf
NLM
Lirio ACM, Pinto T de JA. Development of risk-management approach in additive manufacturing of orthopedic implants [Internet]. Proceedings. 2024 ;[citado 2024 out. 03 ] Available from: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf
Vancouver
Lirio ACM, Pinto T de JA. Development of risk-management approach in additive manufacturing of orthopedic implants [Internet]. Proceedings. 2024 ;[citado 2024 out. 03 ] Available from: https://avestia.com/RAN2024_Proceedings/files/RAN24_Proceedings.pdf
Trabalho de evento
Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants (2023)
Assis, Cleiton Lazaro Fazolo de; Mecelis, Guilherme Rosati; Silva, Eraldo Jannone da ; Rodrigues, Alessandro Roger ; Coelho, Reginaldo Teixeira
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de et al. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. 2023, Anais.. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf. Acesso em: 03 out. 2024.
APA
Assis, C. L. F. de, Mecelis, G. R., Silva, E. J. da, Rodrigues, A. R., & Coelho, R. T. (2023). Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants. In Proceedings. Cranfield, United Kingdom: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
NLM
Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
Vancouver
Assis CLF de, Mecelis GR, Silva EJ da, Rodrigues AR, Coelho RT. Surface texture on micromilling of a Ti6Al4V alloy for biomedical implants [Internet]. Proceedings. 2023 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/059fe8ac-fa11-496a-9c17-d3b125dfb3ea/PROD_26619_SYSNO_3167830.pdf
Trabalho de evento-resumo
Effect of post-mortem interval and body temperature on tissue susceptibility (2022)
Otsuka, Fábio Seiji ; Chaim, Khallil Taverna; Otaduy, Maria Concepción García; Salmon, Carlos Ernesto Garrido
Source: Proceedings. Conference titles: Joint Annual Meeting ISMRM-ESMRMB. Unidades: FM, FFCLRP
Subjects: TEMPERATURA CORPORAL, MORTE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OTSUKA, Fábio Seiji et al. Effect of post-mortem interval and body temperature on tissue susceptibility. 2022, Anais.. Concord: International Society for Magnetic Resonance in Medicine - ISMRM, 2022. Disponível em: https://archive.ismrm.org/2022/1532.html. Acesso em: 03 out. 2024.
APA
Otsuka, F. S., Chaim, K. T., Otaduy, M. C. G., & Salmon, C. E. G. (2022). Effect of post-mortem interval and body temperature on tissue susceptibility. In Proceedings. Concord: International Society for Magnetic Resonance in Medicine - ISMRM. Recuperado de https://archive.ismrm.org/2022/1532.html
NLM
Otsuka FS, Chaim KT, Otaduy MCG, Salmon CEG. Effect of post-mortem interval and body temperature on tissue susceptibility [Internet]. Proceedings. 2022 ;[citado 2024 out. 03 ] Available from: https://archive.ismrm.org/2022/1532.html
Vancouver
Otsuka FS, Chaim KT, Otaduy MCG, Salmon CEG. Effect of post-mortem interval and body temperature on tissue susceptibility [Internet]. Proceedings. 2022 ;[citado 2024 out. 03 ] Available from: https://archive.ismrm.org/2022/1532.html
Trabalho de evento
Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA (2021)
Demarchi, Enrico Ferro; Dib, Marcel Henrique Militão; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: USINAGEM, MATERIAIS ÓPTICOS, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DEMARCHI, Enrico Ferro e DIB, Marcel Henrique Militão e JASINEVICIUS, Renato Goulart. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. 2021, Anais.. Cranfield, United Kingdom: EUSPEN, 2021. Disponível em: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf. Acesso em: 03 out. 2024.
APA
Demarchi, E. F., Dib, M. H. M., & Jasinevicius, R. G. (2021). Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf
NLM
Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf
Vancouver
Demarchi EF, Dib MHM, Jasinevicius RG. Micro-endmilling of Fresnel structure on RSA 6061-T6 and PMMA [Internet]. Proceedings. 2021 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/e8921d0f-401f-4413-b666-090ae7897e34/OK___trabalho%2001%20-%20Micro-endmilling%20of%20Fresnel%20structure%20on%20RSA%206061-T6%20and%20PMMA.pdf
Trabalho de evento
Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests (2020)
Thorel, Luc; El Haffar, Ismat; Maatouk, Semaan; Schiavon, José Antonio; Tsuha, Cristina de Hollanda Cavalcanti
Source: Proceedings. Conference titles: International Symposium on Frontiers in Offshore Geotechnics - ISFOG. Unidade: EESC
Subjects: ESTACAS, ANCORAGEM, GEOTECNIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
THOREL, Luc et al. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests. 2020, Anais.. London, United Kingdom: SIMSG, 2020. Disponível em: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf. Acesso em: 03 out. 2024.
APA
Thorel, L., El Haffar, I., Maatouk, S., Schiavon, J. A., & Tsuha, C. de H. C. (2020). Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests. In Proceedings. London, United Kingdom: SIMSG. Recuperado de https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf
NLM
Thorel L, El Haffar I, Maatouk S, Schiavon JA, Tsuha C de HC. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf
Vancouver
Thorel L, El Haffar I, Maatouk S, Schiavon JA, Tsuha C de HC. Cyclic loading of helical pile as anchor for floating windturbines: centrifuge tests [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ed5eb0b7-2f53-4c28-b41c-03610c5f673a/trabalho%2006%20-%20CYCLIC%20LOADING%20OF%20HELICAL%20PILE%20AS%20ANCHOR%20FOR%20FLOATING%28..%29%20%28Fourth%20International%20Symposium%20on%20Frontiers%20in%20Offshore%20Geotechnics%2C%20ISFOG%202020%29.pdf
Trabalho de evento
Value proposition of product-service systems: an experimental study to compare two different design approaches (2020)
Fernandes, Sânia da Costa; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C; Rozenfeld, Henrique
Source: Proceedings. Conference titles: International Conference Design - DESIGN 2020. Unidade: EESC
Subjects: SISTEMA PRODUTO-SERVIÇO (PSS), ENGENHARIA DE PRODUÇÃO, MODELO DE NEGÓCIO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Sânia da Costa et al. Value proposition of product-service systems: an experimental study to compare two different design approaches. 2020, Anais.. Glasgow, United Kingdom: The Design Society, 2020. Disponível em: https://doi.org/10.1017/dsd.2020.84. Acesso em: 03 out. 2024.
APA
Fernandes, S. da C., Pigosso, D. C. A., McAloone, T. C., & Rozenfeld, H. (2020). Value proposition of product-service systems: an experimental study to compare two different design approaches. In Proceedings. Glasgow, United Kingdom: The Design Society. doi:10.1017/dsd.2020.84
NLM
Fernandes S da C, Pigosso DCA, McAloone TC, Rozenfeld H. Value proposition of product-service systems: an experimental study to compare two different design approaches [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://doi.org/10.1017/dsd.2020.84
Vancouver
Fernandes S da C, Pigosso DCA, McAloone TC, Rozenfeld H. Value proposition of product-service systems: an experimental study to compare two different design approaches [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://doi.org/10.1017/dsd.2020.84
Trabalho de evento
Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels (2020)
Baptistella, Victor Eduardo Corte; Nascimento Junior, Valter Salles do; Ribatski, Gherhardt
Source: Proceedings. Conference titles: Micro and Nano Flows Conference. Unidade: EESC
Subjects: TRANSFERÊNCIA DE CALOR, ESCOAMENTO BIFÁSICO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BAPTISTELLA, Victor Eduardo Corte e NASCIMENTO JUNIOR, Valter Salles do e RIBATSKI, Gherhardt. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels. 2020, Anais.. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. Disponível em: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf. Acesso em: 03 out. 2024.
APA
Baptistella, V. E. C., Nascimento Junior, V. S. do, & Ribatski, G. (2020). Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels. In Proceedings. London, UK: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf
NLM
Baptistella VEC, Nascimento Junior VS do, Ribatski G. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf
Vancouver
Baptistella VEC, Nascimento Junior VS do, Ribatski G. Theoretical analysis of a sensor for evaluation of liquid film thickness of annular flows in microscale channels [Internet]. Proceedings. 2020 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/ff546538-b421-415b-bf5b-752c9d4ca3d2/PROD_26258_SYSNO_3153050.pdf
Trabalho de evento
Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel (2019)
Assis, Cleiton Lazaro Fazolo de; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: AÇO BAIXO CARBONO, USINAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ASSIS, Cleiton Lazaro Fazolo de e JASINEVICIUS, Renato Goulart. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. 2019, Anais.. Cranfield, United Kingdom: EUSPEN, 2019. Disponível em: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf. Acesso em: 03 out. 2024.
APA
Assis, C. L. F. de, & Jasinevicius, R. G. (2019). Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf
NLM
Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf
Vancouver
Assis CLF de, Jasinevicius RG. Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel [Internet]. Proceedings. 2019 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/49b706d7-3ccd-42c0-95df-1254cdc32f9c/OK___resumo%2001%20-%20Influence%20of%20tool%20neck%20length%20on%20tool%20deflections%20during%20micromilling%20of%20an%20ultrafine%20grained%20low-carbon%20steel.%20%2819th%20International%20Conf%29%20%281%29.pdf
Trabalho de evento
The role of eco-innovations on the companies social performance (2019)
Tumelero, Cleonir; Sbragia, Roberto ; Borini, Felipe Mendes
Source: Proceedings. Conference titles: ISPIM Innovation Conference. Unidade: FEA
Subjects: COOPERAÇÃO, PESQUISA, DESENVOLVIMENTO SUSTENTÁVEL, RESPONSABILIDADE SOCIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TUMELERO, Cleonir e SBRAGIA, Roberto e BORINI, Felipe Mendes. The role of eco-innovations on the companies social performance. 2019, Anais.. Manchester: ISPIM, 2019. . Acesso em: 03 out. 2024.
APA
Tumelero, C., Sbragia, R., & Borini, F. M. (2019). The role of eco-innovations on the companies social performance. In Proceedings. Manchester: ISPIM.
NLM
Tumelero C, Sbragia R, Borini FM. The role of eco-innovations on the companies social performance. Proceedings. 2019 ;[citado 2024 out. 03 ]
Vancouver
Tumelero C, Sbragia R, Borini FM. The role of eco-innovations on the companies social performance. Proceedings. 2019 ;[citado 2024 out. 03 ]
Trabalho de evento
Trends in BIM and IoT for reactive maintenance (2019)
Fialho, Beatriz Campos; Codinhoto, Ricardo ; Fabricio, Márcio Minto
Source: Proceedings. Conference titles: CIB W78 2019 Conference - ICT in Design, Construction and Management in Architecture, Engineering, Construction and Operations (AECO). Unidade: IAU
Assunto: MODELOS DE APRENDIZAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FIALHO, Beatriz Campos e CODINHOTO, Ricardo e FABRICIO, Márcio Minto. Trends in BIM and IoT for reactive maintenance. 2019, Anais.. New Casttle: Northumbria University, 2019. . Acesso em: 03 out. 2024.
APA
Fialho, B. C., Codinhoto, R., & Fabricio, M. M. (2019). Trends in BIM and IoT for reactive maintenance. In Proceedings. New Casttle: Northumbria University.
NLM
Fialho BC, Codinhoto R, Fabricio MM. Trends in BIM and IoT for reactive maintenance. Proceedings. 2019 ;[citado 2024 out. 03 ]
Vancouver
Fialho BC, Codinhoto R, Fabricio MM. Trends in BIM and IoT for reactive maintenance. Proceedings. 2019 ;[citado 2024 out. 03 ]
Trabalho de evento-resumo
The impact of dataset modifications on music similarity measures (2019)
Bodo, Roberto Piassi Passos ; Benetos, Emmanouil ; Queiroz, Marcelo Gomes de
Source: Proceedings. Conference titles: Digital Music Research Network Workshop - DMRN+14. Unidade: IME
Assunto: COMPUTAÇÃO MUSICAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BODO, Roberto Piassi Passos e BENETOS, Emmanouil e QUEIROZ, Marcelo Gomes de. The impact of dataset modifications on music similarity measures. 2019, Anais.. London: Centre for Digital Music, 2019. Disponível em: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898. Acesso em: 03 out. 2024.
APA
Bodo, R. P. P., Benetos, E., & Queiroz, M. G. de. (2019). The impact of dataset modifications on music similarity measures. In Proceedings. London: Centre for Digital Music. Recuperado de https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898
NLM
Bodo RPP, Benetos E, Queiroz MG de. The impact of dataset modifications on music similarity measures [Internet]. Proceedings. 2019 ;[citado 2024 out. 03 ] Available from: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898
Vancouver
Bodo RPP, Benetos E, Queiroz MG de. The impact of dataset modifications on music similarity measures [Internet]. Proceedings. 2019 ;[citado 2024 out. 03 ] Available from: https://qmro.qmul.ac.uk/xmlui/handle/123456789/61898
Trabalho de evento
Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon (2018)
Dib, Marcel Henrique Militão; Porto, Arthur José Vieira; Jasinevicius, Renato Goulart
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: CRISTALOGRAFIA, TORNEAMENTO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DIB, Marcel Henrique Militão e PORTO, Arthur José Vieira e JASINEVICIUS, Renato Goulart. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon. 2018, Anais.. Cranfield, United Kingdom: EUSPEN, 2018. Disponível em: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf. Acesso em: 03 out. 2024.
APA
Dib, M. H. M., Porto, A. J. V., & Jasinevicius, R. G. (2018). Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf
NLM
Dib MHM, Porto AJV, Jasinevicius RG. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf
Vancouver
Dib MHM, Porto AJV, Jasinevicius RG. Influence of tool geometry and crystallographic orientation upon ductile response in monocrystalline silicon [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/269aa81f-96d8-445c-8a39-950163eb152b/OK___trabalho%2006%20-%20Influence%20of%20tool%20geometry%20and%20crystallographic%20orientation%20upon%20ductile%20response%20in%20monocrystalline%20silicon%20%28euspen%202018%29.pdf
Trabalho de evento
Parametric investigation of EESC-USP aeroacoustic fan rig (2018)
Gigena Cuenca, Rafael; Greco Júnior, Paulo Celso ; Martínez Rocamora Junior, Bernardo
Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: AEROACÚSTICA, KRIGAGEM, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GIGENA CUENCA, Rafael e GRECO JÚNIOR, Paulo Celso e MARTÍNEZ ROCAMORA JUNIOR, Bernardo. Parametric investigation of EESC-USP aeroacoustic fan rig. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/dac92081-b591-461c-b6c2-36d72d42eab6/AP8F33%7E1.PDF. Acesso em: 03 out. 2024.
APA
Gigena Cuenca, R., Greco Júnior, P. C., & Martínez Rocamora Junior, B. (2018). Parametric investigation of EESC-USP aeroacoustic fan rig. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/dac92081-b591-461c-b6c2-36d72d42eab6/AP8F33%7E1.PDF
NLM
Gigena Cuenca R, Greco Júnior PC, Martínez Rocamora Junior B. Parametric investigation of EESC-USP aeroacoustic fan rig [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/dac92081-b591-461c-b6c2-36d72d42eab6/AP8F33%7E1.PDF
Vancouver
Gigena Cuenca R, Greco Júnior PC, Martínez Rocamora Junior B. Parametric investigation of EESC-USP aeroacoustic fan rig [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/dac92081-b591-461c-b6c2-36d72d42eab6/AP8F33%7E1.PDF
Trabalho de evento
Flight dynamics modeling and trim curves of a conceptual semi-tandem wing VTOL UAV (2018)
Daud Filho, Antonio Carlos; Belo, Eduardo Morgado
Source: Proceedings. Conference titles: International Congress of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: DINÂMICA DE VOO, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DAUD FILHO, Antonio Carlos e BELO, Eduardo Morgado. Flight dynamics modeling and trim curves of a conceptual semi-tandem wing VTOL UAV. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/987dd969-af4d-49be-a001-64ec8719b596/trabalho%2001%20-%20FLIGHT%20DYNAMICS%20MODELING%20AND%20TRIM%20CURVES%20OF%20A%20CONCEPTUAL%20SEMI-TANDEM%20WING%20VTOL%20UAV%20%2831st%20Congress%20of%20the%20International%20Council%20of%20the%20Aeronautical%20Sciences%29_removed.pdf. Acesso em: 03 out. 2024.
APA
Daud Filho, A. C., & Belo, E. M. (2018). Flight dynamics modeling and trim curves of a conceptual semi-tandem wing VTOL UAV. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/987dd969-af4d-49be-a001-64ec8719b596/trabalho%2001%20-%20FLIGHT%20DYNAMICS%20MODELING%20AND%20TRIM%20CURVES%20OF%20A%20CONCEPTUAL%20SEMI-TANDEM%20WING%20VTOL%20UAV%20%2831st%20Congress%20of%20the%20International%20Council%20of%20the%20Aeronautical%20Sciences%29_removed.pdf
NLM
Daud Filho AC, Belo EM. Flight dynamics modeling and trim curves of a conceptual semi-tandem wing VTOL UAV [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/987dd969-af4d-49be-a001-64ec8719b596/trabalho%2001%20-%20FLIGHT%20DYNAMICS%20MODELING%20AND%20TRIM%20CURVES%20OF%20A%20CONCEPTUAL%20SEMI-TANDEM%20WING%20VTOL%20UAV%20%2831st%20Congress%20of%20the%20International%20Council%20of%20the%20Aeronautical%20Sciences%29_removed.pdf
Vancouver
Daud Filho AC, Belo EM. Flight dynamics modeling and trim curves of a conceptual semi-tandem wing VTOL UAV [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/987dd969-af4d-49be-a001-64ec8719b596/trabalho%2001%20-%20FLIGHT%20DYNAMICS%20MODELING%20AND%20TRIM%20CURVES%20OF%20A%20CONCEPTUAL%20SEMI-TANDEM%20WING%20VTOL%20UAV%20%2831st%20Congress%20of%20the%20International%20Council%20of%20the%20Aeronautical%20Sciences%29_removed.pdf
Trabalho de evento
An initial prototype of a tool for defining value proposition in the product-service system (PSS) design (2018)
Fernandes, Sânia da Costa; Rosa, Maiara; Souza, Carolina Queiroz; Rozenfeld, Henrique
Source: Proceedings. Conference titles: International Conference Design - DESIGN 2018. Unidade: EESC
Subjects: SISTEMA PRODUTO-SERVIÇO (PSS), DESIGN, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERNANDES, Sânia da Costa et al. An initial prototype of a tool for defining value proposition in the product-service system (PSS) design. 2018, Anais.. Glasgow, United Kingdom: The Design Society, 2018. Disponível em: https://doi.org/10.21278/idc.2018.0433. Acesso em: 03 out. 2024.
APA
Fernandes, S. da C., Rosa, M., Souza, C. Q., & Rozenfeld, H. (2018). An initial prototype of a tool for defining value proposition in the product-service system (PSS) design. In Proceedings. Glasgow, United Kingdom: The Design Society. doi:10.21278/idc.2018.0433
NLM
Fernandes S da C, Rosa M, Souza CQ, Rozenfeld H. An initial prototype of a tool for defining value proposition in the product-service system (PSS) design [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://doi.org/10.21278/idc.2018.0433
Vancouver
Fernandes S da C, Rosa M, Souza CQ, Rozenfeld H. An initial prototype of a tool for defining value proposition in the product-service system (PSS) design [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://doi.org/10.21278/idc.2018.0433
Trabalho de evento
An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations (2018)
Coelho, Reginaldo Teixeira ; Azevedo, Rayssa; Assis, Cleiton
Source: Proceedings. Conference titles: International Conference & Exhibition. Unidade: EESC
Subjects: MANUFATURA ADITIVA, RUGOSIDADE SUPERFICIAL, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COELHO, Reginaldo Teixeira e AZEVEDO, Rayssa e ASSIS, Cleiton. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations. 2018, Anais.. Cranfield, United Kingdom: EUSPEN, 2018. Disponível em: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf. Acesso em: 03 out. 2024.
APA
Coelho, R. T., Azevedo, R., & Assis, C. (2018). An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations. In Proceedings. Cranfield, United Kingdom: EUSPEN. Recuperado de https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf
NLM
Coelho RT, Azevedo R, Assis C. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf
Vancouver
Coelho RT, Azevedo R, Assis C. An investigation of anisotropy on AISI 316L obtained by additive manufacturing (AM) measuring surface roughness after micro-endmilling operations [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/a96353fa-2405-468a-8c79-d4413c27ea7b/art05.pdf
Trabalho de evento
Design and performance assessment of an inverted rectangular dorsal intake for military aviation (2018)
Bravo Mosquera, Pedro David; Abdalla, Alvaro Martins ; Cerón Muñoz, Hernán Darío ; Catalano, Fernando Martini
Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: AERONAVES MILITARES, FUSELAGEM DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRAVO MOSQUERA, Pedro David et al. Design and performance assessment of an inverted rectangular dorsal intake for military aviation. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/f61f0f51-4199-4f6a-af2a-132b70c86bd1/trabalho%2003%20-%20DESIGN%20AND%20PERFORMANCE%20ASSESSMENT%20OF%20AN%20INVERTED%20RECTANGULAR%20DORSAL%20INTAKE%20FOR%20MILITARY%20AVIATION%20%28ICAS%202018%29.pdf. Acesso em: 03 out. 2024.
APA
Bravo Mosquera, P. D., Abdalla, A. M., Cerón Muñoz, H. D., & Catalano, F. M. (2018). Design and performance assessment of an inverted rectangular dorsal intake for military aviation. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/f61f0f51-4199-4f6a-af2a-132b70c86bd1/trabalho%2003%20-%20DESIGN%20AND%20PERFORMANCE%20ASSESSMENT%20OF%20AN%20INVERTED%20RECTANGULAR%20DORSAL%20INTAKE%20FOR%20MILITARY%20AVIATION%20%28ICAS%202018%29.pdf
NLM
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Design and performance assessment of an inverted rectangular dorsal intake for military aviation [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/f61f0f51-4199-4f6a-af2a-132b70c86bd1/trabalho%2003%20-%20DESIGN%20AND%20PERFORMANCE%20ASSESSMENT%20OF%20AN%20INVERTED%20RECTANGULAR%20DORSAL%20INTAKE%20FOR%20MILITARY%20AVIATION%20%28ICAS%202018%29.pdf
Vancouver
Bravo Mosquera PD, Abdalla AM, Cerón Muñoz HD, Catalano FM. Design and performance assessment of an inverted rectangular dorsal intake for military aviation [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/f61f0f51-4199-4f6a-af2a-132b70c86bd1/trabalho%2003%20-%20DESIGN%20AND%20PERFORMANCE%20ASSESSMENT%20OF%20AN%20INVERTED%20RECTANGULAR%20DORSAL%20INTAKE%20FOR%20MILITARY%20AVIATION%20%28ICAS%202018%29.pdf
Trabalho de evento
Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing (2018)
Pelegrineli, Luis Antonio Vieira; Liorbano, Felipe Fernandes; Natori, Henrique Ossamu Hisano; Angélico, Ricardo Afonso
Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: FUSELAGEM DE AERONAVES, AERODINÂMICA DE AERONAVES, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PELEGRINELI, Luis Antonio Vieira et al. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf. Acesso em: 03 out. 2024.
APA
Pelegrineli, L. A. V., Liorbano, F. F., Natori, H. O. H., & Angélico, R. A. (2018). Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
NLM
Pelegrineli LAV, Liorbano FF, Natori HOH, Angélico RA. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
Vancouver
Pelegrineli LAV, Liorbano FF, Natori HOH, Angélico RA. Influence of airframe stiffness on the aerodynamic coefficients of a high aspect ratio wing [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/f5e5051e-5b2d-417b-9a23-f0fc663dd1fc/trabalho%2001%20-%20Influence%20of%20airframe%20stiffness%20on%20the%20aerodynamic%20coefficients%20of%20a%20high%20aspect%20ratio%20wing%20%28ICAS%202018%29.pdf
Trabalho de evento
Evaluation of wind tunnel wall boundarylayer control for 2-D high-lift aerodynamic and aeroacoustic testing (2018)
Catalano, Fernando Martini ; Pereira, Lourenço Tércio Lima
Source: Proceedings. Conference titles: Congress of the International Council of the Aeronautical Sciences - ICAS. Unidade: EESC
Subjects: AERODINÂMICA DE AERONAVES, AEROACÚSTICA, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CATALANO, Fernando Martini e PEREIRA, Lourenço Tércio Lima. Evaluation of wind tunnel wall boundarylayer control for 2-D high-lift aerodynamic and aeroacoustic testing. 2018, Anais.. Edinburgh, UK: ICAS, 2018. Disponível em: https://repositorio.usp.br/directbitstream/8868ad20-52da-4512-a88d-a20413b31958/trabalho%2016%20-%20EVALUATION%20OF%20WIND%20TUNNEL%20WALL%20BOUNDARY-LAYER%20CONTROL%20FOR%202-D%20HIGH-LIFT%20AERODYNAMIC%20AND%20AEROACOUSTIC%20TESTING%20%28ICAS%202018%29.pdf. Acesso em: 03 out. 2024.
APA
Catalano, F. M., & Pereira, L. T. L. (2018). Evaluation of wind tunnel wall boundarylayer control for 2-D high-lift aerodynamic and aeroacoustic testing. In Proceedings. Edinburgh, UK: ICAS. Recuperado de https://repositorio.usp.br/directbitstream/8868ad20-52da-4512-a88d-a20413b31958/trabalho%2016%20-%20EVALUATION%20OF%20WIND%20TUNNEL%20WALL%20BOUNDARY-LAYER%20CONTROL%20FOR%202-D%20HIGH-LIFT%20AERODYNAMIC%20AND%20AEROACOUSTIC%20TESTING%20%28ICAS%202018%29.pdf
NLM
Catalano FM, Pereira LTL. Evaluation of wind tunnel wall boundarylayer control for 2-D high-lift aerodynamic and aeroacoustic testing [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/8868ad20-52da-4512-a88d-a20413b31958/trabalho%2016%20-%20EVALUATION%20OF%20WIND%20TUNNEL%20WALL%20BOUNDARY-LAYER%20CONTROL%20FOR%202-D%20HIGH-LIFT%20AERODYNAMIC%20AND%20AEROACOUSTIC%20TESTING%20%28ICAS%202018%29.pdf
Vancouver
Catalano FM, Pereira LTL. Evaluation of wind tunnel wall boundarylayer control for 2-D high-lift aerodynamic and aeroacoustic testing [Internet]. Proceedings. 2018 ;[citado 2024 out. 03 ] Available from: https://repositorio.usp.br/directbitstream/8868ad20-52da-4512-a88d-a20413b31958/trabalho%2016%20-%20EVALUATION%20OF%20WIND%20TUNNEL%20WALL%20BOUNDARY-LAYER%20CONTROL%20FOR%202-D%20HIGH-LIFT%20AERODYNAMIC%20AND%20AEROACOUSTIC%20TESTING%20%28ICAS%202018%29.pdf

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Publisher

Conference titles

Grupo de pesquisa

Funding Agencies

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration