ReP USP - Resultado da busca

Parte de monografia/livro
Procedure for estimate tensile strength parallel to the grain of tropical wood species (2020)
Christoforo, André Luis ; Aquino, Vinicius Borges de Moura; Panzera, Túlio Hallak ; Lahr, Francisco Antonio Rocco
Source: New Ideas Concerning Science and Technology Vol. 1. Unidade: EESC
Subjects: RESISTÊNCIA A TRAÇÃO, MADEIRA, MÍNIMOS QUADRADOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CHRISTOFORO, André Luis et al. Procedure for estimate tensile strength parallel to the grain of tropical wood species. New Ideas Concerning Science and Technology Vol. 1. Tradução . West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. . Disponível em: https://doi.org/10.9734/bpi/nicst/v1. Acesso em: 29 maio 2024.
APA
Christoforo, A. L., Aquino, V. B. de M., Panzera, T. H., & Lahr, F. A. R. (2020). Procedure for estimate tensile strength parallel to the grain of tropical wood species. In New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.9734/bpi/nicst/v1
NLM
Christoforo AL, Aquino VB de M, Panzera TH, Lahr FAR. Procedure for estimate tensile strength parallel to the grain of tropical wood species [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 29 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Vancouver
Christoforo AL, Aquino VB de M, Panzera TH, Lahr FAR. Procedure for estimate tensile strength parallel to the grain of tropical wood species [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 29 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Artigo de periodico
Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions (2020)
Santos, Sabrina Nicoleti Carvalho dos ; Almeida, Tiago Hendrigo de ; Sardela, Mauro R. ; Lahr, Francisco Antonio Rocco ; Gonçalves, Débora
Source: Journal of the Indian Academy of Wood Science. Unidades: EESC, IFSC
Subjects: MADEIRA, ENSAIOS NÃO DESTRUTIVOS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Sabrina Nicoleti Carvalho dos et al. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions. Journal of the Indian Academy of Wood Science, v. 17, n. 1, p. 46-53, 2020Tradução . . Disponível em: https://doi.org/10.1007/s13196-019-00253-w. Acesso em: 29 maio 2024.
APA
Santos, S. N. C. dos, Almeida, T. H. de, Sardela, M. R., Lahr, F. A. R., & Gonçalves, D. (2020). Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions. Journal of the Indian Academy of Wood Science, 17( 1), 46-53. doi:10.1007/s13196-019-00253-w
NLM
Santos SNC dos, Almeida TH de, Sardela MR, Lahr FAR, Gonçalves D. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions [Internet]. Journal of the Indian Academy of Wood Science. 2020 ; 17( 1): 46-53.[citado 2024 maio 29 ] Available from: https://doi.org/10.1007/s13196-019-00253-w
Vancouver
Santos SNC dos, Almeida TH de, Sardela MR, Lahr FAR, Gonçalves D. Surface properties and crystallinity of Pinus taeda and Hymenaea stilbocarpa treated at low temperatures in different grain directions [Internet]. Journal of the Indian Academy of Wood Science. 2020 ; 17( 1): 46-53.[citado 2024 maio 29 ] Available from: https://doi.org/10.1007/s13196-019-00253-w
Parte de monografia/livro
Studies on the stiffness properties of Pinus caribaea round timber logs (2020)
Zangiácomo, André Luiz; Aquino, Vinicius Borges de Moura; Christoforo, André Luis ; Lahr, Francisco Antonio Rocco
Source: New Ideas Concerning Science and Technology Vol. 1. Unidade: EESC
Subjects: MADEIRA, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANGIÁCOMO, André Luiz et al. Studies on the stiffness properties of Pinus caribaea round timber logs. New Ideas Concerning Science and Technology Vol. 1. Tradução . West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2020. . Disponível em: https://doi.org/10.9734/bpi/nicst/v1. Acesso em: 29 maio 2024.
APA
Zangiácomo, A. L., Aquino, V. B. de M., Christoforo, A. L., & Lahr, F. A. R. (2020). Studies on the stiffness properties of Pinus caribaea round timber logs. In New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo. doi:10.9734/bpi/nicst/v1
NLM
Zangiácomo AL, Aquino VB de M, Christoforo AL, Lahr FAR. Studies on the stiffness properties of Pinus caribaea round timber logs [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 29 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Vancouver
Zangiácomo AL, Aquino VB de M, Christoforo AL, Lahr FAR. Studies on the stiffness properties of Pinus caribaea round timber logs [Internet]. In: New Ideas Concerning Science and Technology Vol. 1. West Bengal, India: Escola de Engenharia de São Carlos, Universidade de São Paulo; 2020. [citado 2024 maio 29 ] Available from: https://doi.org/10.9734/bpi/nicst/v1
Artigo de periodico
Correlation between density and porosity from ten species of tropical wood (2020)
Duarte, Bárbara Branquinho ; Lahr, Francisco Antonio Rocco ; Nascimento, Maria Fátima; Christoforo, André Luis
Source: International Journal of Engineering Research and Applications. Unidade: EESC
Subjects: DENSIDADE DA MADEIRA, MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DUARTE, Bárbara Branquinho et al. Correlation between density and porosity from ten species of tropical wood. International Journal of Engineering Research and Applications, v. 10, n. 3, p. 30-32, 2020Tradução . . Disponível em: https://doi.org/10.9790/9622-1003023032. Acesso em: 29 maio 2024.
APA
Duarte, B. B., Lahr, F. A. R., Nascimento, M. F., & Christoforo, A. L. (2020). Correlation between density and porosity from ten species of tropical wood. International Journal of Engineering Research and Applications, 10( 3), 30-32. doi:10.9790/9622-1003023032
NLM
Duarte BB, Lahr FAR, Nascimento MF, Christoforo AL. Correlation between density and porosity from ten species of tropical wood [Internet]. International Journal of Engineering Research and Applications. 2020 ; 10( 3): 30-32.[citado 2024 maio 29 ] Available from: https://doi.org/10.9790/9622-1003023032
Vancouver
Duarte BB, Lahr FAR, Nascimento MF, Christoforo AL. Correlation between density and porosity from ten species of tropical wood [Internet]. International Journal of Engineering Research and Applications. 2020 ; 10( 3): 30-32.[citado 2024 maio 29 ] Available from: https://doi.org/10.9790/9622-1003023032
Artigo de periodico
Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) (2019)
Oliveira, Gabriel Oberon Bertoldi; Pinheiro, Roberto Vasconcelos; Arroyo, Felipe Nascimento; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Silva, Diogo Aparecido Lopes; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: MADEIRA, COBERTURAS, TRELIÇAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Gabriel Oberon Bertoldi et al. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters). Current Journal of Applied Science and Technology, v. 35, n. 4, p. 1-8, 2019Tradução . . Disponível em: https://doi.org/10.9734/cjast/2019/v35i430188. Acesso em: 29 maio 2024.
APA
Oliveira, G. O. B., Pinheiro, R. V., Arroyo, F. N., Almeida, D. H. de, Almeida, T. H. de, Silva, D. A. L., et al. (2019). Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters). Current Journal of Applied Science and Technology, 35( 4), 1-8. doi:10.9734/cjast/2019/v35i430188
NLM
Oliveira GOB, Pinheiro RV, Arroyo FN, Almeida DH de, Almeida TH de, Silva DAL, Christoforo AL, Lahr FAR. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) [Internet]. Current Journal of Applied Science and Technology. 2019 ; 35( 4): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/cjast/2019/v35i430188
Vancouver
Oliveira GOB, Pinheiro RV, Arroyo FN, Almeida DH de, Almeida TH de, Silva DAL, Christoforo AL, Lahr FAR. Technical feasibility study of the use of softwoods in lattice structure "Howe" type for roofing (Gaps between 8-18 meters) [Internet]. Current Journal of Applied Science and Technology. 2019 ; 35( 4): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/cjast/2019/v35i430188
Artigo de periodico
Design and execution of wood-concrete deck bridge (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: PONTES DE MADEIRA, ESTRUTURAS MISTAS, ESTRUTURAS DE CONCRETO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Design and execution of wood-concrete deck bridge. Current Journal of Applied Science and Technology, v. 28, n. 3, p. 1-10, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42784. Acesso em: 29 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Design and execution of wood-concrete deck bridge. Current Journal of Applied Science and Technology, 28( 3), 1-10. doi:10.9734/CJAST/2018/42784
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Design and execution of wood-concrete deck bridge [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 3): 1-10.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42784
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Design and execution of wood-concrete deck bridge [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 3): 1-10.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42784
Artigo de periodico
Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species (2018)
Almeida, Andréa de Souza; Lanini, Tamiris Luiza Soares; Caetano, Juliana Argente; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: MADEIRA, ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Andréa de Souza et al. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42945. Acesso em: 29 maio 2024.
APA
Almeida, A. de S., Lanini, T. L. S., Caetano, J. A., Christoforo, A. L., & Lahr, F. A. R. (2018). Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species. Current Journal of Applied Science and Technology, 28( 5), 1-7. doi:10.9734/CJAST/2018/42945
NLM
Almeida A de S, Lanini TLS, Caetano JA, Christoforo AL, Lahr FAR. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-7.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42945
Vancouver
Almeida A de S, Lanini TLS, Caetano JA, Christoforo AL, Lahr FAR. Evaluation of stiffness in compression perpendicular to grain of brazilian tropical wood species [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-7.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42945
Artigo de periodico
Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: CONEXÕES ESTRUTURAIS, ESTRUTURAS DE MADEIRA, ESTRUTURAS MISTAS, ESTRUTURAS DE CONCRETO, CISALHAMENTO, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-8, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/43127. Acesso em: 29 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens. Current Journal of Applied Science and Technology, 28( 5), 1-8. doi:10.9734/CJAST/2018/43127
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/43127
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Behavior of shear connectors formed by bonded-in “X” type steel bars in wood-concrete specimens [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/43127
Artigo de periodico
Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber (2018)
Pigozzo, Julio César; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Calil Júnior, Carlito; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: ESTRUTURAS, ESTRUTURAS DE MADEIRA, CONEXÕES ESTRUTURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber. Current Journal of Applied Science and Technology, v. 28, n. 6, p. 1-9, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42970. Acesso em: 29 maio 2024.
APA
Pigozzo, J. C., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, Calil Júnior, C., & Lahr, F. A. R. (2018). Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber. Current Journal of Applied Science and Technology, 28( 6), 1-9. doi:10.9734/CJAST/2018/42970
NLM
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 6): 1-9.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42970
Vancouver
Pigozzo JC, Arroyo FN, Christoforo AL, Almeida DH de, Calil Júnior C, Lahr FAR. Pull out strength of bonded-In steel bars behavior in Pinus oocarpa shiede timber [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 6): 1-9.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42970
Artigo de periodico
Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood (2018)
Pigozzo, Julio César; Chahud, Eduardo; Arroyo, Felipe Nascimento; Christoforo, André Luis; Almeida, Diego Henrique de; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: CONEXÕES ESTRUTURAIS, ESTRUTURAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIGOZZO, Julio César et al. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood. Current Journal of Applied Science and Technology, v. 28, n. 5, p. 1-6, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/42993. Acesso em: 29 maio 2024.
APA
Pigozzo, J. C., Chahud, E., Arroyo, F. N., Christoforo, A. L., Almeida, D. H. de, & Lahr, F. A. R. (2018). Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood. Current Journal of Applied Science and Technology, 28( 5), 1-6. doi:10.9734/CJAST/2018/42993
NLM
Pigozzo JC, Chahud E, Arroyo FN, Christoforo AL, Almeida DH de, Lahr FAR. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-6.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42993
Vancouver
Pigozzo JC, Chahud E, Arroyo FN, Christoforo AL, Almeida DH de, Lahr FAR. Comparison of anchorage strength of bonded-in steel bars with epoxy resin, varying the superficial treatments and moisture after bonding, using Corymbia citriodora wood [Internet]. Current Journal of Applied Science and Technology. 2018 ; 28( 5): 1-6.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/42993
Artigo de periodico
Evaluation of the number of load cycles to determine some wood stiffness properties (2018)
Morales, Elen Aparecida Martines; Almeida, Diego Henrique de; Christoforo, André Luis; Panzera, Tulio Hallak; Lahr, Francisco Antonio Rocco
Source: Current Journal of Applied Science and Technology. Unidade: EESC
Subjects: ESTRUTURAS, MADEIRA, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORALES, Elen Aparecida Martines et al. Evaluation of the number of load cycles to determine some wood stiffness properties. Current Journal of Applied Science and Technology, v. 29, n. 1, p. 1-7, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/43486. Acesso em: 29 maio 2024.
APA
Morales, E. A. M., Almeida, D. H. de, Christoforo, A. L., Panzera, T. H., & Lahr, F. A. R. (2018). Evaluation of the number of load cycles to determine some wood stiffness properties. Current Journal of Applied Science and Technology, 29( 1), 1-7. doi:10.9734/CJAST/2018/43486
NLM
Morales EAM, Almeida DH de, Christoforo AL, Panzera TH, Lahr FAR. Evaluation of the number of load cycles to determine some wood stiffness properties [Internet]. Current Journal of Applied Science and Technology. 2018 ; 29( 1): 1-7.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/43486
Vancouver
Morales EAM, Almeida DH de, Christoforo AL, Panzera TH, Lahr FAR. Evaluation of the number of load cycles to determine some wood stiffness properties [Internet]. Current Journal of Applied Science and Technology. 2018 ; 29( 1): 1-7.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/43486
Artigo de periodico
Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density (2018)
Cavalheiro, Raquel Schmitt; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: British Journal of Applied Science & Technology. Unidade: EESC
Subjects: ELASTICIDADE DAS ESTRUTURAS, ESTRUTURAS DE MADEIRA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAVALHEIRO, Raquel Schmitt et al. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density. British Journal of Applied Science & Technology, v. 26, n. 1, p. 1-8, 2018Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2018/39531. Acesso em: 29 maio 2024.
APA
Cavalheiro, R. S., Almeida, D. H. de, Almeida, T. H. de, Christoforo, A. L., & Lahr, F. A. R. (2018). Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density. British Journal of Applied Science & Technology, 26( 1), 1-8. doi:10.9734/CJAST/2018/39531
NLM
Cavalheiro RS, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density [Internet]. British Journal of Applied Science & Technology. 2018 ; 26( 1): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/39531
Vancouver
Cavalheiro RS, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Estimation of modulus of elasticity in static bending of wood in structural dimensions as a function of longitudinal vibration and density [Internet]. British Journal of Applied Science & Technology. 2018 ; 26( 1): 1-8.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2018/39531
Artigo de periodico
Physical and mechanical properties of sabiá wood (Mimosa caesalpiniaefolia Bentham.) (2017)
Nascimento, Maria de Fátima do; Almeida, Diego Henrique de; Almeida, Tiago Hendrigo de; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: British Journal of Applied Science & Technology. Unidade: EESC
Subjects: CAATINGA, MADEIRA, ESTRUTURAS DE MADEIRA, CONSTRUÇÃO CIVIL, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NASCIMENTO, Maria de Fátima do et al. Physical and mechanical properties of sabiá wood (Mimosa caesalpiniaefolia Bentham.). British Journal of Applied Science & Technology, v. 25, n. 4, p. 1-5, 2017Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2017/38747. Acesso em: 29 maio 2024.
APA
Nascimento, M. de F. do, Almeida, D. H. de, Almeida, T. H. de, Christoforo, A. L., & Lahr, F. A. R. (2017). Physical and mechanical properties of sabiá wood (Mimosa caesalpiniaefolia Bentham.). British Journal of Applied Science & Technology, 25( 4), 1-5. doi:10.9734/CJAST/2017/38747
NLM
Nascimento M de F do, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Physical and mechanical properties of sabiá wood (Mimosa caesalpiniaefolia Bentham.) [Internet]. British Journal of Applied Science & Technology. 2017 ; 25( 4): 1-5.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2017/38747
Vancouver
Nascimento M de F do, Almeida DH de, Almeida TH de, Christoforo AL, Lahr FAR. Physical and mechanical properties of sabiá wood (Mimosa caesalpiniaefolia Bentham.) [Internet]. British Journal of Applied Science & Technology. 2017 ; 25( 4): 1-5.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2017/38747
Artigo de periodico
Glued laminated timber produced with tropical brazilian wood species (2017)
Zangiacomo, André Luiz; Balanço, Giovana G.; Christoforo, André Luis
Source: British Journal of Applied Science & Technology. Unidade: EESC
Subjects: ESTRUTURAS DE MADEIRA, RESINAS COMPOSTAS, MAMONA, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ZANGIACOMO, André Luiz e BALANÇO, Giovana G. e CHRISTOFORO, André Luis. Glued laminated timber produced with tropical brazilian wood species. British Journal of Applied Science & Technology, v. 23, n. 1, p. 1-12, 2017Tradução . . Disponível em: https://doi.org/10.9734/BJAST/2017/34690. Acesso em: 29 maio 2024.
APA
Zangiacomo, A. L., Balanço, G. G., & Christoforo, A. L. (2017). Glued laminated timber produced with tropical brazilian wood species. British Journal of Applied Science & Technology, 23( 1), 1-12. doi:10.9734/BJAST/2017/34690
NLM
Zangiacomo AL, Balanço GG, Christoforo AL. Glued laminated timber produced with tropical brazilian wood species [Internet]. British Journal of Applied Science & Technology. 2017 ; 23( 1): 1-12.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/BJAST/2017/34690
Vancouver
Zangiacomo AL, Balanço GG, Christoforo AL. Glued laminated timber produced with tropical brazilian wood species [Internet]. British Journal of Applied Science & Technology. 2017 ; 23( 1): 1-12.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/BJAST/2017/34690
Artigo de periodico
Hybrid panels of wood plies and particles Pinus sp (2017)
Macedo, Laurenn Borges de; Balanco, Giovana Gobatto; Marini, Lucas José; Panzera, Túlio Hallak; Christoforo, André Luis; Lahr, Francisco Antonio Rocco
Source: British Journal of Applied Science & Technology. Unidade: EESC
Subjects: ESTRUTURAS, COMPENSADO, PAINÉIS, MADEIRA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MACEDO, Laurenn Borges de et al. Hybrid panels of wood plies and particles Pinus sp. British Journal of Applied Science & Technology, v. 24, n. 6, p. 1-9, 2017Tradução . . Disponível em: https://doi.org/10.9734/CJAST/2017/36951. Acesso em: 29 maio 2024.
APA
Macedo, L. B. de, Balanco, G. G., Marini, L. J., Panzera, T. H., Christoforo, A. L., & Lahr, F. A. R. (2017). Hybrid panels of wood plies and particles Pinus sp. British Journal of Applied Science & Technology, 24( 6), 1-9. doi:10.9734/CJAST/2017/36951
NLM
Macedo LB de, Balanco GG, Marini LJ, Panzera TH, Christoforo AL, Lahr FAR. Hybrid panels of wood plies and particles Pinus sp [Internet]. British Journal of Applied Science & Technology. 2017 ; 24( 6): 1-9.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2017/36951
Vancouver
Macedo LB de, Balanco GG, Marini LJ, Panzera TH, Christoforo AL, Lahr FAR. Hybrid panels of wood plies and particles Pinus sp [Internet]. British Journal of Applied Science & Technology. 2017 ; 24( 6): 1-9.[citado 2024 maio 29 ] Available from: https://doi.org/10.9734/CJAST/2017/36951

USP Schools

ReP

Filtros

Authors

USP affiliated authors

Subjects

Normalized affiliation

Non normalized affiliation