ReP USP - Resultado da busca

Artigo de periodico
Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network (2024)
Brito, Francisco Javier Goyo ; Silva, Marcelo de Assumpção Pereira da ; Tarpani, José Ricardo
Source: Composite Interfaces. Unidades: IFSC, EESC
Subjects: MATERIAIS, CELULOSE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BRITO, Francisco Javier Goyo e SILVA, Marcelo de Assumpção Pereira da e TARPANI, José Ricardo. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network. Composite Interfaces, v. 31, n. 2, p. 239-260, 2024Tradução . . Disponível em: https://doi.org/10.1080/09276440.2023.2248771. Acesso em: 11 nov. 2024.
APA
Brito, F. J. G., Silva, M. de A. P. da, & Tarpani, J. R. (2024). Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network. Composite Interfaces, 31( 2), 239-260. doi:10.1080/09276440.2023.2248771
NLM
Brito FJG, Silva M de AP da, Tarpani JR. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network [Internet]. Composite Interfaces. 2024 ; 31( 2): 239-260.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1080/09276440.2023.2248771
Vancouver
Brito FJG, Silva M de AP da, Tarpani JR. Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network [Internet]. Composite Interfaces. 2024 ; 31( 2): 239-260.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1080/09276440.2023.2248771
Artigo de periodico
Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing (2024)
Leite, Ramon Resende; Komorizono, Amanda Akemy; Bernardi, Maria Inês Basso ; Carvalho, Antonio José Felix ; Mastelaro, Valmor Roberto
Source: Ceramics International. Unidades: EESC, IFSC
Subjects: SENSOR, MATERIAIS NANOESTRUTURADOS, CELULOSE, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
LEITE, Ramon Resende et al. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing. Ceramics International, v. 50, n. 7, p. 10192-10202, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ceramint.2023.12.329. Acesso em: 11 nov. 2024.
APA
Leite, R. R., Komorizono, A. A., Bernardi, M. I. B., Carvalho, A. J. F., & Mastelaro, V. R. (2024). Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing. Ceramics International, 50( 7), 10192-10202. doi:10.1016/j.ceramint.2023.12.329
NLM
Leite RR, Komorizono AA, Bernardi MIB, Carvalho AJF, Mastelaro VR. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing [Internet]. Ceramics International. 2024 ; 50( 7): 10192-10202.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.12.329
Vancouver
Leite RR, Komorizono AA, Bernardi MIB, Carvalho AJF, Mastelaro VR. Environmentally friendly synthesis of In2O3 nano octahedrons by cellulose nanofiber template-assisted route and their potential application for O3 gas sensing [Internet]. Ceramics International. 2024 ; 50( 7): 10192-10202.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.12.329
Artigo de periodico
Lysine grafted poly(lactic acid): an intrinsically antimicrobial polymer (2024)
Dorm, Bruna Carolina; Bastos, Anielly Costa; Nossa, Tamires de Souza; Domigos Neto, Benedito; Iemma, Monica Rosas Costa; Carvalho, Antonio Jose Felix ; Trovatti, Eliane
Source: International Journal of Biological Macromolecules. Unidade: EESC
Subjects: POLÍMEROS (MATERIAIS), BIOMATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DORM, Bruna Carolina et al. Lysine grafted poly(lactic acid): an intrinsically antimicrobial polymer. International Journal of Biological Macromolecules, v. 273, p. 1-9, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.ijbiomac.2024.133181. Acesso em: 11 nov. 2024.
APA
Dorm, B. C., Bastos, A. C., Nossa, T. de S., Domigos Neto, B., Iemma, M. R. C., Carvalho, A. J. F., & Trovatti, E. (2024). Lysine grafted poly(lactic acid): an intrinsically antimicrobial polymer. International Journal of Biological Macromolecules, 273, 1-9. doi:10.1016/j.ijbiomac.2024.133181
NLM
Dorm BC, Bastos AC, Nossa T de S, Domigos Neto B, Iemma MRC, Carvalho AJF, Trovatti E. Lysine grafted poly(lactic acid): an intrinsically antimicrobial polymer [Internet]. International Journal of Biological Macromolecules. 2024 ; 273 1-9.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.ijbiomac.2024.133181
Vancouver
Dorm BC, Bastos AC, Nossa T de S, Domigos Neto B, Iemma MRC, Carvalho AJF, Trovatti E. Lysine grafted poly(lactic acid): an intrinsically antimicrobial polymer [Internet]. International Journal of Biological Macromolecules. 2024 ; 273 1-9.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.ijbiomac.2024.133181
Artigo de periodico
One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers (2024)
Trovatti, Eliane ; Ferreira, Antônio Gilberto ; Carvalho, Antonio Jose Felix ; Gandini, Alessandro
Source: Polymer Bulletin. Unidade: EESC
Subjects: POLÍMEROS (MATERIAIS), POLIÉSTER, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TROVATTI, Eliane et al. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers. Polymer Bulletin, p. 1-16, 2024Tradução . . Disponível em: https://doi.org/10.1007/s00289-022-04385-x. Acesso em: 11 nov. 2024.
APA
Trovatti, E., Ferreira, A. G., Carvalho, A. J. F., & Gandini, A. (2024). One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers. Polymer Bulletin, 1-16. doi:10.1007/s00289-024-05441-4
NLM
Trovatti E, Ferreira AG, Carvalho AJF, Gandini A. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers [Internet]. Polymer Bulletin. 2024 ; 1-16.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Vancouver
Trovatti E, Ferreira AG, Carvalho AJF, Gandini A. One-pot synthesis of copolymers through the application of the thermally reversible furan/maleimide diels–alder reaction. 2. preparation of polyester–polyurethane copolymers [Internet]. Polymer Bulletin. 2024 ; 1-16.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1007/s00289-022-04385-x
Artigo de periodico
Novel colloidal silica technology for in situ spinelization in MgO-containing refractories (2024)
Salomão, Rafael ; Fernandes, Leandro; Sundblom, Andreas; Greenwood, Peter; Martinatti, Isabela Santos; Tiba, Paulo Roberto Teruo
Source: Materials Research. Unidade: EESC
Subjects: SINTER, REFRATÁRIOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael et al. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories. Materials Research, v. 27, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438. Acesso em: 11 nov. 2024.
APA
Salomão, R., Fernandes, L., Sundblom, A., Greenwood, P., Martinatti, I. S., & Tiba, P. R. T. (2024). Novel colloidal silica technology for in situ spinelization in MgO-containing refractories. Materials Research, 27, 1-13. doi:10.1590/1980-5373-MR-2023-0438
NLM
Salomão R, Fernandes L, Sundblom A, Greenwood P, Martinatti IS, Tiba PRT. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories [Internet]. Materials Research. 2024 ; 27 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438
Vancouver
Salomão R, Fernandes L, Sundblom A, Greenwood P, Martinatti IS, Tiba PRT. Novel colloidal silica technology for in situ spinelization in MgO-containing refractories [Internet]. Materials Research. 2024 ; 27 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0438
Artigo de periodico
An experimental investigation of the mechanical properties and failure mode of 3D stitched composites (2024)
Reis, Lucas Moura Montenegro; Ribeiro, Marcelo Leite ; Madureira, Fernando; Morelli, Arnaldo Carlos; Monteiro, Sergio Neves; Arantes, Vera Lúcia
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: 3-D VER TERCEIRA DIMENSÃO., TENACIDADE DOS MATERIAIS, MATERIAIS COMPÓSITOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
REIS, Lucas Moura Montenegro et al. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, v. 29, p. 90-100, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2023.12.283. Acesso em: 11 nov. 2024.
APA
Reis, L. M. M., Ribeiro, M. L., Madureira, F., Morelli, A. C., Monteiro, S. N., & Arantes, V. L. (2024). An experimental investigation of the mechanical properties and failure mode of 3D stitched composites. Journal of Materials Research and Technology, 29, 90-100. doi:10.1016/j.jmrt.2023.12.283
NLM
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Vancouver
Reis LMM, Ribeiro ML, Madureira F, Morelli AC, Monteiro SN, Arantes VL. An experimental investigation of the mechanical properties and failure mode of 3D stitched composites [Internet]. Journal of Materials Research and Technology. 2024 ; 29 90-100.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2023.12.283
Artigo de periodico
Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons (2024)
Rêgo, Galtiere Corrêa ; van Drunen, Julia; Matijevic, Bozidar; Canale, Lauralice de Campos Franceschini ; Pinto, Haroldo Cavalcanti ; Casteletti, Luiz Carlos
Source: Materials Chemistry and Physics. Unidade: EESC
Subjects: FERRO FUNDIDO, DESGASTE ABRASIVO, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
RÊGO, Galtiere Corrêa et al. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons. Materials Chemistry and Physics, v. 317, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.matchemphys.2024.129210. Acesso em: 11 nov. 2024.
APA
Rêgo, G. C., van Drunen, J., Matijevic, B., Canale, L. de C. F., Pinto, H. C., & Casteletti, L. C. (2024). Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons. Materials Chemistry and Physics, 317, 1-13. doi:10.1016/j.matchemphys.2024.129210
NLM
Rêgo GC, van Drunen J, Matijevic B, Canale L de CF, Pinto HC, Casteletti LC. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons [Internet]. Materials Chemistry and Physics. 2024 ; 317 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.matchemphys.2024.129210
Vancouver
Rêgo GC, van Drunen J, Matijevic B, Canale L de CF, Pinto HC, Casteletti LC. Effects of niobium and molybdenum addition on microstructural characteristics and wear properties of 14 wt%Cr white cast irons [Internet]. Materials Chemistry and Physics. 2024 ; 317 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.matchemphys.2024.129210
Artigo de periodico
Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy (2024)
Mariani, Fábio Edson; Galo, Rodrigo ; Gelamo, Rogerio Valentim; Leite, Natalia Bueno; Pinto, Haroldo Cavalcanti ; Moreto, Jeferson Aparecido
Source: Materials Letters. Unidade: EESC
Subjects: LIGAS METÁLICAS, DESGASTE ADESIVO, SOLDAGEM, ENGENHARIA MECÂNICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MARIANI, Fábio Edson et al. Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy. Materials Letters, v. 364, p. 1-4, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.matlet.2024.136348. Acesso em: 11 nov. 2024.
APA
Mariani, F. E., Galo, R., Gelamo, R. V., Leite, N. B., Pinto, H. C., & Moreto, J. A. (2024). Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy. Materials Letters, 364, 1-4. doi:10.1016/j.matlet.2024.136348
NLM
Mariani FE, Galo R, Gelamo RV, Leite NB, Pinto HC, Moreto JA. Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy [Internet]. Materials Letters. 2024 ; 364 1-4.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.matlet.2024.136348
Vancouver
Mariani FE, Galo R, Gelamo RV, Leite NB, Pinto HC, Moreto JA. Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy [Internet]. Materials Letters. 2024 ; 364 1-4.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.matlet.2024.136348
Artigo de periodico
Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites (2024)
Poletto, Murillo Ricardo Lombardo; Callegari, Bruna; Ferreira, Eduardo Bellini ; Branciforti, Márcia Cristina
Source: Journal of Applied Polymer Science. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, FIBRAS NATURAIS, POLÍMEROS (MATERIAIS), MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
POLETTO, Murillo Ricardo Lombardo et al. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites. Journal of Applied Polymer Science, p. 1-9, 2024Tradução . . Disponível em: https://dx.doi.org/10.1002/app.56166. Acesso em: 11 nov. 2024.
APA
Poletto, M. R. L., Callegari, B., Ferreira, E. B., & Branciforti, M. C. (2024). Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites. Journal of Applied Polymer Science, 1-9. doi:10.1002/app.56166
NLM
Poletto MRL, Callegari B, Ferreira EB, Branciforti MC. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites [Internet]. Journal of Applied Polymer Science. 2024 ; 1-9.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1002/app.56166
Vancouver
Poletto MRL, Callegari B, Ferreira EB, Branciforti MC. Effect of borosilicate residue as flame retardant and reinforcement filler in polypropylene/natural fiber composites [Internet]. Journal of Applied Polymer Science. 2024 ; 1-9.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1002/app.56166
Artigo de periodico
The positive impact of the reactive sputtered nanostructured Nb2O5 coatings to reduce the FCG rates of the 2524-T3 alloy in an aggressive medium (2024)
Ferreira, M. O. A.; Santos, K. R. dos; Bon, D. G.; Gelamo, R. V.; Galo, R.; Leite, N. B.; Baptista, C. A. R. P.; Pinto, Haroldo Cavalcanti ; Moreto, J.A.
Source: Emergent Materials. Unidade: EESC
Subjects: FADIGA DE AERONAVES, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, M. O. A. et al. The positive impact of the reactive sputtered nanostructured Nb2O5 coatings to reduce the FCG rates of the 2524-T3 alloy in an aggressive medium. Emergent Materials, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1007/s42247-024-00746-6. Acesso em: 11 nov. 2024.
APA
Ferreira, M. O. A., Santos, K. R. dos, Bon, D. G., Gelamo, R. V., Galo, R., Leite, N. B., et al. (2024). The positive impact of the reactive sputtered nanostructured Nb2O5 coatings to reduce the FCG rates of the 2524-T3 alloy in an aggressive medium. Emergent Materials, 1-13. doi:10.1007/s42247-024-00746-6
NLM
Ferreira MOA, Santos KR dos, Bon DG, Gelamo RV, Galo R, Leite NB, Baptista CARP, Pinto HC, Moreto JA. The positive impact of the reactive sputtered nanostructured Nb2O5 coatings to reduce the FCG rates of the 2524-T3 alloy in an aggressive medium [Internet]. Emergent Materials. 2024 ; 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1007/s42247-024-00746-6
Vancouver
Ferreira MOA, Santos KR dos, Bon DG, Gelamo RV, Galo R, Leite NB, Baptista CARP, Pinto HC, Moreto JA. The positive impact of the reactive sputtered nanostructured Nb2O5 coatings to reduce the FCG rates of the 2524-T3 alloy in an aggressive medium [Internet]. Emergent Materials. 2024 ; 1-13.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1007/s42247-024-00746-6
Artigo de periodico
Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid (2024)
Santos, Marcos Júnio Alves; Oliveira Junior, William; Ribeiro, Josy Kelly Lima; Bastos, Ivan Napoleão; Pereira, Julia Nascimento; Souza, Patrícia Nirlane da Costa; Pinto, Haroldo Cavalcanti ; Silva, Erenilton Pereira da
Source: Journal of Alloys and Compounds. Unidade: EESC
Subjects: MATERIAIS, CORROSÃO, REVESTIMENTOS, FILMES FINOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Marcos Júnio Alves et al. Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid. Journal of Alloys and Compounds, v. 1002, p. 10, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.jallcom.2024.175339. Acesso em: 11 nov. 2024.
APA
Santos, M. J. A., Oliveira Junior, W., Ribeiro, J. K. L., Bastos, I. N., Pereira, J. N., Souza, P. N. da C., et al. (2024). Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid. Journal of Alloys and Compounds, 1002, 10. doi:10.1016/j.jallcom.2024.175339
NLM
Santos MJA, Oliveira Junior W, Ribeiro JKL, Bastos IN, Pereira JN, Souza PN da C, Pinto HC, Silva EP da. Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid [Internet]. Journal of Alloys and Compounds. 2024 ; 1002 10.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.jallcom.2024.175339
Vancouver
Santos MJA, Oliveira Junior W, Ribeiro JKL, Bastos IN, Pereira JN, Souza PN da C, Pinto HC, Silva EP da. Zinc oxide coating impact on corrosion of ZK60 magnesium alloys in simulated body fluid [Internet]. Journal of Alloys and Compounds. 2024 ; 1002 10.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.jallcom.2024.175339
Artigo de periodico
Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering (2024)
Soares, Lucas de Figueiredo; Brito Neto, Francisco Maciel; Reis, Lucas Moura Montenegro; Vacchi, Guilherme dos Santos; Monteiro, Sergio Neves; Rovere, Carlos Alberto Della; Arantes, Vera Lúcia
Source: Journal of Materials Research and Technology. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, ZIRCÔNIA, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SOARES, Lucas de Figueiredo et al. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, v. 33, p. 2303-2314, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.jmrt.2024.09.214. Acesso em: 11 nov. 2024.
APA
Soares, L. de F., Brito Neto, F. M., Reis, L. M. M., Vacchi, G. dos S., Monteiro, S. N., Rovere, C. A. D., & Arantes, V. L. (2024). Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering. Journal of Materials Research and Technology, 33, 2303-2314. doi:10.1016/j.jmrt.2024.09.214
NLM
Soares L de F, Brito Neto FM, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Vancouver
Soares L de F, Brito Neto FM, Reis LMM, Vacchi G dos S, Monteiro SN, Rovere CAD, Arantes VL. Corrosion behavior of 316L stainless steel reinforced by dispersed yttria stabilized zirconia fabricated by spark plasma sintering [Internet]. Journal of Materials Research and Technology. 2024 ; 33 2303-2314.[citado 2024 nov. 11 ] Available from: https://dx.doi.org/10.1016/j.jmrt.2024.09.214
Artigo de periodico
Fine-tuning in-plane interdomain spacing ofpolystyrene-b-poly(ethene-co-butadiene)-b-polystyrene triblock copolymer addingmonodisperse polystyrene (2024)
Almeida, Juliana Mara Pinto de ; Staffa, Lucas Henrique; Balogh, Débora Terezia ; Carvalho, Antonio Jose Felix
Source: Polymer International. Unidades: IFSC, EESC
Subjects: POLÍMEROS (MATERIAIS), FILMES FINOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Juliana Mara Pinto de et al. Fine-tuning in-plane interdomain spacing ofpolystyrene-b-poly(ethene-co-butadiene)-b-polystyrene triblock copolymer addingmonodisperse polystyrene. Polymer International, v. 73, n. 2, p. 88-93, 2024Tradução . . Disponível em: http://dx.doi.org/10.1002/pi.6572. Acesso em: 11 nov. 2024.
APA
Almeida, J. M. P. de, Staffa, L. H., Balogh, D. T., & Carvalho, A. J. F. (2024). Fine-tuning in-plane interdomain spacing ofpolystyrene-b-poly(ethene-co-butadiene)-b-polystyrene triblock copolymer addingmonodisperse polystyrene. Polymer International, 73( 2), 88-93. doi:10.1002/pi.6572
NLM
Almeida JMP de, Staffa LH, Balogh DT, Carvalho AJF. Fine-tuning in-plane interdomain spacing ofpolystyrene-b-poly(ethene-co-butadiene)-b-polystyrene triblock copolymer addingmonodisperse polystyrene [Internet]. Polymer International. 2024 ; 73( 2): 88-93.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1002/pi.6572
Vancouver
Almeida JMP de, Staffa LH, Balogh DT, Carvalho AJF. Fine-tuning in-plane interdomain spacing ofpolystyrene-b-poly(ethene-co-butadiene)-b-polystyrene triblock copolymer addingmonodisperse polystyrene [Internet]. Polymer International. 2024 ; 73( 2): 88-93.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1002/pi.6572
Artigo de periodico
Silk fibroin-derived electrospun materials for biomedical applications: a review (2024)
Santos, Francisco Vieira dos ; Siqueira, Renato Luiz; Ramos, Lucas de Morais; Yoshioka, Sergio Akinobu ; Branciforti, Márcia Cristina ; Corrêa, Daniel Souza
Source: International Journal of Biological Macromolecules. Unidades: IQSC, EESC, IFSC
Subjects: SEDA, BIOMATERIAIS, ENGENHARIA TECIDUAL, MEDICINA REGENERATIVA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Francisco Vieira dos et al. Silk fibroin-derived electrospun materials for biomedical applications: a review. International Journal of Biological Macromolecules, v. 254, n. Ja 2024, p. 127641-1-127641-34, 2024Tradução . . Disponível em: https://doi.org/10.1016/j.ijbiomac.2023.127641. Acesso em: 11 nov. 2024.
APA
Santos, F. V. dos, Siqueira, R. L., Ramos, L. de M., Yoshioka, S. A., Branciforti, M. C., & Corrêa, D. S. (2024). Silk fibroin-derived electrospun materials for biomedical applications: a review. International Journal of Biological Macromolecules, 254( Ja 2024), 127641-1-127641-34. doi:10.1016/j.ijbiomac.2023.127641
NLM
Santos FV dos, Siqueira RL, Ramos L de M, Yoshioka SA, Branciforti MC, Corrêa DS. Silk fibroin-derived electrospun materials for biomedical applications: a review [Internet]. International Journal of Biological Macromolecules. 2024 ;254( Ja 2024): 127641-1-127641-34.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1016/j.ijbiomac.2023.127641
Vancouver
Santos FV dos, Siqueira RL, Ramos L de M, Yoshioka SA, Branciforti MC, Corrêa DS. Silk fibroin-derived electrospun materials for biomedical applications: a review [Internet]. International Journal of Biological Macromolecules. 2024 ;254( Ja 2024): 127641-1-127641-34.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1016/j.ijbiomac.2023.127641
Artigo de periodico
Microstructure evolution of porous calcium hexaluminate compacts during first heating (2024)
Sakihama, Jose
Source: Ceramics International. Unidade: EESC
Subjects: CERÂMICA, ISOLAMENTO TÉRMICO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAKIHAMA, Jose. Microstructure evolution of porous calcium hexaluminate compacts during first heating. Ceramics International, v. 50, n. 3, p. 4875-4884, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ceramint.2023.11.230. Acesso em: 11 nov. 2024.
APA
Sakihama, J. (2024). Microstructure evolution of porous calcium hexaluminate compacts during first heating. Ceramics International, 50( 3), 4875-4884. doi:10.1016/j.ceramint.2023.11.230
NLM
Sakihama J. Microstructure evolution of porous calcium hexaluminate compacts during first heating [Internet]. Ceramics International. 2024 ; 50( 3): 4875-4884.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.11.230
Vancouver
Sakihama J. Microstructure evolution of porous calcium hexaluminate compacts during first heating [Internet]. Ceramics International. 2024 ; 50( 3): 4875-4884.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1016/j.ceramint.2023.11.230
Artigo de periodico
Efect of Nb2O5 coating on the corrosion resistance of the 7050-T7451 aluminium alloy (2023)
Ferreira, M. O. A.; Teixeira, G. T. L.; Leite, N. B.; Pinto, Haroldo Cavalcanti ; Aoki, Idalina Vieira ; Moreto, J.A.
Source: Emergent Materials. Unidade: EESC
Subjects: LIGAS METÁLICAS, AERONÁUTICA, CORROSÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, M. O. A. et al. Efect of Nb2O5 coating on the corrosion resistance of the 7050-T7451 aluminium alloy. Emergent Materials, p. 1-17, 2023Tradução . . Disponível em: http://dx.doi.org/10.1007/s42247-023-00569-x. Acesso em: 11 nov. 2024.
APA
Ferreira, M. O. A., Teixeira, G. T. L., Leite, N. B., Pinto, H. C., Aoki, I. V., & Moreto, J. A. (2023). Efect of Nb2O5 coating on the corrosion resistance of the 7050-T7451 aluminium alloy. Emergent Materials, 1-17. doi:10.1007/s42247-023-00569-x
NLM
Ferreira MOA, Teixeira GTL, Leite NB, Pinto HC, Aoki IV, Moreto JA. Efect of Nb2O5 coating on the corrosion resistance of the 7050-T7451 aluminium alloy [Internet]. Emergent Materials. 2023 ; 1-17.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1007/s42247-023-00569-x
Vancouver
Ferreira MOA, Teixeira GTL, Leite NB, Pinto HC, Aoki IV, Moreto JA. Efect of Nb2O5 coating on the corrosion resistance of the 7050-T7451 aluminium alloy [Internet]. Emergent Materials. 2023 ; 1-17.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1007/s42247-023-00569-x
Artigo de periodico
Efects of particle size on the preparation of biomass samples for structural characterization (2023)
Vieira, Rogerio Martins; Sanvezzo, Paula Bertolino; Branciforti, Márcia Cristina ; Brienzo, Michel
Source: BioEnergy Research. Unidade: EESC
Subjects: RESÍDUOS ORGÂNICOS, FRUTAS, BIOENERGIA, GRANULOMETRIA, BIOMASSA, ENGENHARIA HIDRÁULICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
VIEIRA, Rogerio Martins et al. Efects of particle size on the preparation of biomass samples for structural characterization. BioEnergy Research, p. 1-12, 2023Tradução . . Disponível em: https://doi.org/10.1007/s12155-023-10587-6. Acesso em: 11 nov. 2024.
APA
Vieira, R. M., Sanvezzo, P. B., Branciforti, M. C., & Brienzo, M. (2023). Efects of particle size on the preparation of biomass samples for structural characterization. BioEnergy Research, 1-12. doi:10.1007/s12155-023-10587-6
NLM
Vieira RM, Sanvezzo PB, Branciforti MC, Brienzo M. Efects of particle size on the preparation of biomass samples for structural characterization [Internet]. BioEnergy Research. 2023 ; 1-12.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1007/s12155-023-10587-6
Vancouver
Vieira RM, Sanvezzo PB, Branciforti MC, Brienzo M. Efects of particle size on the preparation of biomass samples for structural characterization [Internet]. BioEnergy Research. 2023 ; 1-12.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1007/s12155-023-10587-6
Artigo de periodico
Highly porous niobium-containing silica glasses applied to the microwave-assisted conversion of fructose into HMF (2023)
Costa, Maria José Fonseca; Gonçalves, Alexandre Amormino dos Santos; Rinaldi, Roberto; Bradtmüller, Henrik; Eckert, Hellmut ; Ferreira, Eduardo Bellini
Source: Catalysis Communications. Unidades: EESC, IFSC
Subjects: VIDRO, FRUTOSE, TECNOLOGIA DE MICRO-ONDAS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
COSTA, Maria José Fonseca et al. Highly porous niobium-containing silica glasses applied to the microwave-assisted conversion of fructose into HMF. Catalysis Communications, v. 174, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1016/j.catcom.2022.106577. Acesso em: 11 nov. 2024.
APA
Costa, M. J. F., Gonçalves, A. A. dos S., Rinaldi, R., Bradtmüller, H., Eckert, H., & Ferreira, E. B. (2023). Highly porous niobium-containing silica glasses applied to the microwave-assisted conversion of fructose into HMF. Catalysis Communications, 174, 1-10. doi:10.1016/j.catcom.2022.106577
NLM
Costa MJF, Gonçalves AA dos S, Rinaldi R, Bradtmüller H, Eckert H, Ferreira EB. Highly porous niobium-containing silica glasses applied to the microwave-assisted conversion of fructose into HMF [Internet]. Catalysis Communications. 2023 ; 174 1-10.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1016/j.catcom.2022.106577
Vancouver
Costa MJF, Gonçalves AA dos S, Rinaldi R, Bradtmüller H, Eckert H, Ferreira EB. Highly porous niobium-containing silica glasses applied to the microwave-assisted conversion of fructose into HMF [Internet]. Catalysis Communications. 2023 ; 174 1-10.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1016/j.catcom.2022.106577
Artigo de periodico
Hydroxylation studies on high-solid load magnesia aqueous suspensions (2023)
Salomão, Rafael ; Fernandes, Leandro
Source: Materials Research. Unidade: EESC
Subjects: HIDROXILASE, MAGNÉSIO, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael e FERNANDES, Leandro. Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, v. 26, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0329. Acesso em: 11 nov. 2024.
APA
Salomão, R., & Fernandes, L. (2023). Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, 26, 1-10. doi:10.1590/1980-5373-MR-2022-0329
NLM
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Vancouver
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2024 nov. 11 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Artigo de periodico
Infuence of PMMA particle size control on the transmittance of PMMA/tempo-oxidized cellulose composites (2023)
Altarugio, Julia Piovezan; Staffa, Lucas Henrique; Carvalho, Antonio Jose Felix ; Almeida, Juliana Mara Pinto de
Source: Journal of Materials Research. Unidade: EESC
Subjects: MATERIAIS COMPÓSITOS, BIOMATERIAIS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALTARUGIO, Julia Piovezan et al. Infuence of PMMA particle size control on the transmittance of PMMA/tempo-oxidized cellulose composites. Journal of Materials Research, p. 1-8, 2023Tradução . . Disponível em: http://dx.doi.org/10.1557/s43578-023-01173-9. Acesso em: 11 nov. 2024.
APA
Altarugio, J. P., Staffa, L. H., Carvalho, A. J. F., & Almeida, J. M. P. de. (2023). Infuence of PMMA particle size control on the transmittance of PMMA/tempo-oxidized cellulose composites. Journal of Materials Research, 1-8. doi:10.1557/s43578-023-01173-9
NLM
Altarugio JP, Staffa LH, Carvalho AJF, Almeida JMP de. Infuence of PMMA particle size control on the transmittance of PMMA/tempo-oxidized cellulose composites [Internet]. Journal of Materials Research. 2023 ; 1-8.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1557/s43578-023-01173-9
Vancouver
Altarugio JP, Staffa LH, Carvalho AJF, Almeida JMP de. Infuence of PMMA particle size control on the transmittance of PMMA/tempo-oxidized cellulose composites [Internet]. Journal of Materials Research. 2023 ; 1-8.[citado 2024 nov. 11 ] Available from: http://dx.doi.org/10.1557/s43578-023-01173-9

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Date published

Subjects

Source title

Publisher

Countries/Territories

Grupo de pesquisa

Funding Agencies

Indexado em

Non normalized affiliation

Countries of institutions of collaboration