ReP USP - Resultado da busca

Trabalho de evento
Modeling of a sandwich beam with thickness-shear active-passive piezoelectric networks (2007)
Santos, Heinsten Frederich Leal dos; Trindade, Marcelo Areias
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: VIBRAÇÕES DE MÁQUINAS (CONTROLE), ATUADORES PIEZELÉTRICOS, PIEZOELETRICIDADE, REDES NEURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SANTOS, Heinsten Frederich Leal dos e TRINDADE, Marcelo Areias. Modeling of a sandwich beam with thickness-shear active-passive piezoelectric networks. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Santos, H. F. L. dos, & Trindade, M. A. (2007). Modeling of a sandwich beam with thickness-shear active-passive piezoelectric networks. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Santos HFL dos, Trindade MA. Modeling of a sandwich beam with thickness-shear active-passive piezoelectric networks. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Santos HFL dos, Trindade MA. Modeling of a sandwich beam with thickness-shear active-passive piezoelectric networks. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Effect of an isolated three-dimensional roughness element on the boundary layer transition to turbulence (2007)
Paula, Igor Braga de; Würz, Werner; Mendonça, Márcio Teixeira de; Medeiros, Marcello Augusto Faraco de
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: AERODINÂMICA DE AERONAVES, RUGOSIDADE SUPERFICIAL
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAULA, Igor Braga de et al. Effect of an isolated three-dimensional roughness element on the boundary layer transition to turbulence. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Paula, I. B. de, Würz, W., Mendonça, M. T. de, & Medeiros, M. A. F. de. (2007). Effect of an isolated three-dimensional roughness element on the boundary layer transition to turbulence. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Paula IB de, Würz W, Mendonça MT de, Medeiros MAF de. Effect of an isolated three-dimensional roughness element on the boundary layer transition to turbulence. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Paula IB de, Würz W, Mendonça MT de, Medeiros MAF de. Effect of an isolated three-dimensional roughness element on the boundary layer transition to turbulence. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Verification and validation of an analysis model of can-based networked control systems (2007)
Godoy, Eduardo Paciência; Sousa, Rafael Vieira de; Porto, Arthur José Vieira; Inamasu, Ricardo Yassushi
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: PROTOCOLOS DE COMUNICAÇÃO, MODELOS MATEMÁTICOS, ANÁLISE DE DESEMPENHO, SISTEMAS DE CONTROLE
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GODOY, Eduardo Paciência et al. Verification and validation of an analysis model of can-based networked control systems. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Godoy, E. P., Sousa, R. V. de, Porto, A. J. V., & Inamasu, R. Y. (2007). Verification and validation of an analysis model of can-based networked control systems. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Verification and validation of an analysis model of can-based networked control systems. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Godoy EP, Sousa RV de, Porto AJV, Inamasu RY. Verification and validation of an analysis model of can-based networked control systems. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
On the adaptive design design and development of a mini vibratory mill applied to ceramic materials (2007)
Silveira, Zilda de Castro; Purquerio, Benedito de Moraes; Fortulan, Carlos Alberto; Cicogna, Thiago Rodrigo; Varoto, Paulo Sérgio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MOINHOS (PROJETO;CONSTRUÇÃO), PÓS CERÂMICOS, PROJETO MECÂNICO (METODOLOGIA)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVEIRA, Zilda de Castro et al. On the adaptive design design and development of a mini vibratory mill applied to ceramic materials. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Silveira, Z. de C., Purquerio, B. de M., Fortulan, C. A., Cicogna, T. R., & Varoto, P. S. (2007). On the adaptive design design and development of a mini vibratory mill applied to ceramic materials. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Silveira Z de C, Purquerio B de M, Fortulan CA, Cicogna TR, Varoto PS. On the adaptive design design and development of a mini vibratory mill applied to ceramic materials. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Silveira Z de C, Purquerio B de M, Fortulan CA, Cicogna TR, Varoto PS. On the adaptive design design and development of a mini vibratory mill applied to ceramic materials. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
A sub-grid two-fluid simulation of a typical gas-solid riser flow (2007)
Milioli, Christian Coelho da Costa; Rotava, Elói ; Milioli, Fernando Eduardo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Assunto: ESCOAMENTO MONOFÁSICO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MILIOLI, Christian Coelho da Costa e ROTAVA, Elói e MILIOLI, Fernando Eduardo. A sub-grid two-fluid simulation of a typical gas-solid riser flow. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Milioli, C. C. da C., Rotava, E., & Milioli, F. E. (2007). A sub-grid two-fluid simulation of a typical gas-solid riser flow. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Milioli CC da C, Rotava E, Milioli FE. A sub-grid two-fluid simulation of a typical gas-solid riser flow. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Milioli CC da C, Rotava E, Milioli FE. A sub-grid two-fluid simulation of a typical gas-solid riser flow. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Effects of temperature and particle size on the conversion of sulfur dioxide sorption by limestones (2007)
Ávila, Ivonete; Crnkovic, Paula Cristina Garcia Manoel; Milioli, Fernando Eduardo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: CALCÁRIO, TERMOGRAVIMETRIA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ÁVILA, Ivonete e CRNKOVIC, Paula Cristina Garcia Manoel e MILIOLI, Fernando Eduardo. Effects of temperature and particle size on the conversion of sulfur dioxide sorption by limestones. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Ávila, I., Crnkovic, P. C. G. M., & Milioli, F. E. (2007). Effects of temperature and particle size on the conversion of sulfur dioxide sorption by limestones. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Ávila I, Crnkovic PCGM, Milioli FE. Effects of temperature and particle size on the conversion of sulfur dioxide sorption by limestones. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Ávila I, Crnkovic PCGM, Milioli FE. Effects of temperature and particle size on the conversion of sulfur dioxide sorption by limestones. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
The impact of active noise control on the perceived sound quality (2007)
Oliveira, Leopoldo Pisanelli Rodrigues de; Varoto, Paulo Sergio; Sas, Paul; Desmet, Wim; Mas, Peter; Van der Auweraer, Herman
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Assunto: VIBRAÇÃO DO SOM (CONTROLE;QUALIDADE)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Leopoldo Pisanelli Rodrigues de et al. The impact of active noise control on the perceived sound quality. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Oliveira, L. P. R. de, Varoto, P. S., Sas, P., Desmet, W., Mas, P., & Van der Auweraer, H. (2007). The impact of active noise control on the perceived sound quality. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Oliveira LPR de, Varoto PS, Sas P, Desmet W, Mas P, Van der Auweraer H. The impact of active noise control on the perceived sound quality. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Oliveira LPR de, Varoto PS, Sas P, Desmet W, Mas P, Van der Auweraer H. The impact of active noise control on the perceived sound quality. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Shape optimization of shafts for desired eigenfrequencies in rotating systems (2007)
Nicoletti, Rodrigo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MÉTODOS NUMÉRICOS DE OTIMIZAÇÃO, ALGORITMOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
NICOLETTI, Rodrigo. Shape optimization of shafts for desired eigenfrequencies in rotating systems. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Nicoletti, R. (2007). Shape optimization of shafts for desired eigenfrequencies in rotating systems. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Nicoletti R. Shape optimization of shafts for desired eigenfrequencies in rotating systems. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Nicoletti R. Shape optimization of shafts for desired eigenfrequencies in rotating systems. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Nondestructive inspection of fatigued riveted lap joints of hybrid fiber-metal laminate Glare TM (2007)
Almeida, Euripedes Guilherme Raphael de; Tarpani, José Ricardo; Soares, Henrique Nogueira
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: FADIGA DOS MATERIAIS, LAMINADOS, MATERIAIS COMPÓSITOS DE FIBRAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Euripedes Guilherme Raphael de e TARPANI, José Ricardo e SOARES, Henrique Nogueira. Nondestructive inspection of fatigued riveted lap joints of hybrid fiber-metal laminate Glare TM. 2007, Anais.. Rio de Janeiro: ABCM, 2007. Disponível em: http://www.abcm.org.br/pt/wp-content/anais/cobem/2007/pdf/COBEM2007-0675.pdf. Acesso em: 27 set. 2024.
APA
Almeida, E. G. R. de, Tarpani, J. R., & Soares, H. N. (2007). Nondestructive inspection of fatigued riveted lap joints of hybrid fiber-metal laminate Glare TM. In Proceedings of COBEM. Rio de Janeiro: ABCM. Recuperado de http://www.abcm.org.br/pt/wp-content/anais/cobem/2007/pdf/COBEM2007-0675.pdf
NLM
Almeida EGR de, Tarpani JR, Soares HN. Nondestructive inspection of fatigued riveted lap joints of hybrid fiber-metal laminate Glare TM [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: http://www.abcm.org.br/pt/wp-content/anais/cobem/2007/pdf/COBEM2007-0675.pdf
Vancouver
Almeida EGR de, Tarpani JR, Soares HN. Nondestructive inspection of fatigued riveted lap joints of hybrid fiber-metal laminate Glare TM [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: http://www.abcm.org.br/pt/wp-content/anais/cobem/2007/pdf/COBEM2007-0675.pdf
Trabalho de evento
An error separation model for form errors evaluation (2007)
Paziani, Fabricio Tadeu; Tsunaki, Roberto Hideaki; Di Giacomo, Benedito
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EESC
Subjects: MEDIÇÃO MECÂNICA, MODELOS MATEMÁTICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PAZIANI, Fabricio Tadeu e TSUNAKI, Roberto Hideaki e DI GIACOMO, Benedito. An error separation model for form errors evaluation. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. . Acesso em: 27 set. 2024.
APA
Paziani, F. T., Tsunaki, R. H., & Di Giacomo, B. (2007). An error separation model for form errors evaluation. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo.
NLM
Paziani FT, Tsunaki RH, Di Giacomo B. An error separation model for form errors evaluation. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Vancouver
Paziani FT, Tsunaki RH, Di Giacomo B. An error separation model for form errors evaluation. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ]
Trabalho de evento
Riser-seabed friction modelling (2007)
Takafuji, Fernanda Cristina de Moraes; Martins, Clóvis de Arruda ; Tanaka, Rafael Loureiro
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: ESTRUTURAS OFFSHORE, TUBOS FLEXÍVEIS, CABOS DE AMARRAÇÃO, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
TAKAFUJI, Fernanda Cristina de Moraes e MARTINS, Clóvis de Arruda e TANAKA, Rafael Loureiro. Riser-seabed friction modelling. 2007, Anais.. Brasília: Escola Politécnica, Universidade de São Paulo, 2007. Disponível em: https://repositorio.usp.br/directbitstream/708397b1-cacb-4fb6-acd6-1df65cba0d92/Martins_CA-2007-RISER-SEABED%20FRICTION%20MODELLING.pdf. Acesso em: 27 set. 2024.
APA
Takafuji, F. C. de M., Martins, C. de A., & Tanaka, R. L. (2007). Riser-seabed friction modelling. In Proceedings of COBEM. Brasília: Escola Politécnica, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/708397b1-cacb-4fb6-acd6-1df65cba0d92/Martins_CA-2007-RISER-SEABED%20FRICTION%20MODELLING.pdf
NLM
Takafuji FC de M, Martins C de A, Tanaka RL. Riser-seabed friction modelling [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/708397b1-cacb-4fb6-acd6-1df65cba0d92/Martins_CA-2007-RISER-SEABED%20FRICTION%20MODELLING.pdf
Vancouver
Takafuji FC de M, Martins C de A, Tanaka RL. Riser-seabed friction modelling [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/708397b1-cacb-4fb6-acd6-1df65cba0d92/Martins_CA-2007-RISER-SEABED%20FRICTION%20MODELLING.pdf
Trabalho de evento
Numerical simulation of bird strike impact against balanced fiberglass/epoxy composite plates (2007)
Azevedo, Ricardo Lessa; Alves, Marcílio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: MATERIAIS COMPÓSITOS DE FIBRAS, IMPACTO DE AERONAVES, AVES (IMPACTO;SIMULAÇÃO NUMÉRICA), MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
AZEVEDO, Ricardo Lessa e ALVES, Marcílio. Numerical simulation of bird strike impact against balanced fiberglass/epoxy composite plates. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/6c5941c6-809c-4265-b492-64e0da3f07cb/AlvesM-2007-Numerical%20simulation%20of%20bird%20strike%20impact%20ok.pdf. Acesso em: 27 set. 2024.
APA
Azevedo, R. L., & Alves, M. (2007). Numerical simulation of bird strike impact against balanced fiberglass/epoxy composite plates. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/6c5941c6-809c-4265-b492-64e0da3f07cb/AlvesM-2007-Numerical%20simulation%20of%20bird%20strike%20impact%20ok.pdf
NLM
Azevedo RL, Alves M. Numerical simulation of bird strike impact against balanced fiberglass/epoxy composite plates [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/6c5941c6-809c-4265-b492-64e0da3f07cb/AlvesM-2007-Numerical%20simulation%20of%20bird%20strike%20impact%20ok.pdf
Vancouver
Azevedo RL, Alves M. Numerical simulation of bird strike impact against balanced fiberglass/epoxy composite plates [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/6c5941c6-809c-4265-b492-64e0da3f07cb/AlvesM-2007-Numerical%20simulation%20of%20bird%20strike%20impact%20ok.pdf
Trabalho de evento
Using time petri nets for modeling and verification of timed constrained workflow systems (2007)
Del Foyo, Pedro Manuel Gonzalez; Silva, José Reinaldo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: REDES DE PETRI (MODELAGEM), CONTROLE DE PROCESSOS, GESTÃO POR PROCESSOS, LÓGICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
DEL FOYO, Pedro Manuel Gonzalez e SILVA, José Reinaldo. Using time petri nets for modeling and verification of timed constrained workflow systems. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/429dee87-f574-4ccd-be57-40fd4c282083/Silva_JR-2007-Using%20time%20petri%20nets%20for%20modeling%20and%20verification%20of%20timed%20constrained%20workflow%20systems.Cobem.pdf. Acesso em: 27 set. 2024.
APA
Del Foyo, P. M. G., & Silva, J. R. (2007). Using time petri nets for modeling and verification of timed constrained workflow systems. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/429dee87-f574-4ccd-be57-40fd4c282083/Silva_JR-2007-Using%20time%20petri%20nets%20for%20modeling%20and%20verification%20of%20timed%20constrained%20workflow%20systems.Cobem.pdf
NLM
Del Foyo PMG, Silva JR. Using time petri nets for modeling and verification of timed constrained workflow systems [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/429dee87-f574-4ccd-be57-40fd4c282083/Silva_JR-2007-Using%20time%20petri%20nets%20for%20modeling%20and%20verification%20of%20timed%20constrained%20workflow%20systems.Cobem.pdf
Vancouver
Del Foyo PMG, Silva JR. Using time petri nets for modeling and verification of timed constrained workflow systems [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/429dee87-f574-4ccd-be57-40fd4c282083/Silva_JR-2007-Using%20time%20petri%20nets%20for%20modeling%20and%20verification%20of%20timed%20constrained%20workflow%20systems.Cobem.pdf
Trabalho de evento
Anaerobic digestion medium-scale cdm project for dairy livestock and agriculture integration (2007)
Obando Diaz, Giancarlo; Fiorelli, Flávio Augusto Sanzovo
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: DESENVOLVIMENTO RURAL, BIOGÁS, LEITE (QUALIDADE;PRODUÇÃO), COGERAÇÃO DE ENERGIA ELÉTRICA, TECNOLOGIA DE ALIMENTOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OBANDO DIAZ, Giancarlo e FIORELLI, Flávio Augusto Sanzovo. Anaerobic digestion medium-scale cdm project for dairy livestock and agriculture integration. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/0e7b2e63-1a40-4ec1-b2c4-0e3f7836c225/Fiorelli-2007-ANAEROBIC%20DIGESTION%20MEDIUM-SCALE%20CDM%20PROJECT%20FOR%20DAIRY%20ok.pdf. Acesso em: 27 set. 2024.
APA
Obando Diaz, G., & Fiorelli, F. A. S. (2007). Anaerobic digestion medium-scale cdm project for dairy livestock and agriculture integration. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/0e7b2e63-1a40-4ec1-b2c4-0e3f7836c225/Fiorelli-2007-ANAEROBIC%20DIGESTION%20MEDIUM-SCALE%20CDM%20PROJECT%20FOR%20DAIRY%20ok.pdf
NLM
Obando Diaz G, Fiorelli FAS. Anaerobic digestion medium-scale cdm project for dairy livestock and agriculture integration [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/0e7b2e63-1a40-4ec1-b2c4-0e3f7836c225/Fiorelli-2007-ANAEROBIC%20DIGESTION%20MEDIUM-SCALE%20CDM%20PROJECT%20FOR%20DAIRY%20ok.pdf
Vancouver
Obando Diaz G, Fiorelli FAS. Anaerobic digestion medium-scale cdm project for dairy livestock and agriculture integration [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/0e7b2e63-1a40-4ec1-b2c4-0e3f7836c225/Fiorelli-2007-ANAEROBIC%20DIGESTION%20MEDIUM-SCALE%20CDM%20PROJECT%20FOR%20DAIRY%20ok.pdf
Trabalho de evento
Uuv task definition using metaprogramming (2007)
Saito, Milton Yukio Godoy; Takase, Fábio Kawaoka; Maruyama, Newton
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: SUBMERSÍVEIS NÃO TRIPULADOS, ESPECIFICAÇÃO DE SISTEMAS E PROGRAMAS, SOFTWARES
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAITO, Milton Yukio Godoy e TAKASE, Fábio Kawaoka e MARUYAMA, Newton. Uuv task definition using metaprogramming. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/41be79c5-c949-4ac7-87e3-e58023111986/Takase-2007-UUV%20TASK%20DEFINITION%20USING.pdf. Acesso em: 27 set. 2024.
APA
Saito, M. Y. G., Takase, F. K., & Maruyama, N. (2007). Uuv task definition using metaprogramming. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/41be79c5-c949-4ac7-87e3-e58023111986/Takase-2007-UUV%20TASK%20DEFINITION%20USING.pdf
NLM
Saito MYG, Takase FK, Maruyama N. Uuv task definition using metaprogramming [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/41be79c5-c949-4ac7-87e3-e58023111986/Takase-2007-UUV%20TASK%20DEFINITION%20USING.pdf
Vancouver
Saito MYG, Takase FK, Maruyama N. Uuv task definition using metaprogramming [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/41be79c5-c949-4ac7-87e3-e58023111986/Takase-2007-UUV%20TASK%20DEFINITION%20USING.pdf
Trabalho de evento
Stress analysis of the machining process through the finite element method (FEM): the effect of a single mns inclusion (2007)
Correa Saldarriaga, Pablo Alejandro; Gonzalez Santos, Diego Fernando; Souza, Roberto Martins de ; Machado, Izabel Fernanda
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: AÇO CARBONO, MÉTODO DOS ELEMENTOS FINITOS, USINAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CORREA SALDARRIAGA, Pablo Alejandro et al. Stress analysis of the machining process through the finite element method (FEM): the effect of a single mns inclusion. 2007, Anais.. Brasília: Escola Politécnica, Universidade de São Paulo, 2007. Disponível em: https://repositorio.usp.br/directbitstream/7ddea42e-83f8-4a33-aeb5-d51c67d6b68d/Souza_RM-2007-Stress%20analysis%20of%20the%20machining%20process%20through%20the%20finite%20element%20method%20%28FEM%29%20the%20effect%20of.pdf. Acesso em: 27 set. 2024.
APA
Correa Saldarriaga, P. A., Gonzalez Santos, D. F., Souza, R. M. de, & Machado, I. F. (2007). Stress analysis of the machining process through the finite element method (FEM): the effect of a single mns inclusion. In Proceedings of COBEM. Brasília: Escola Politécnica, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/7ddea42e-83f8-4a33-aeb5-d51c67d6b68d/Souza_RM-2007-Stress%20analysis%20of%20the%20machining%20process%20through%20the%20finite%20element%20method%20%28FEM%29%20the%20effect%20of.pdf
NLM
Correa Saldarriaga PA, Gonzalez Santos DF, Souza RM de, Machado IF. Stress analysis of the machining process through the finite element method (FEM): the effect of a single mns inclusion [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/7ddea42e-83f8-4a33-aeb5-d51c67d6b68d/Souza_RM-2007-Stress%20analysis%20of%20the%20machining%20process%20through%20the%20finite%20element%20method%20%28FEM%29%20the%20effect%20of.pdf
Vancouver
Correa Saldarriaga PA, Gonzalez Santos DF, Souza RM de, Machado IF. Stress analysis of the machining process through the finite element method (FEM): the effect of a single mns inclusion [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/7ddea42e-83f8-4a33-aeb5-d51c67d6b68d/Souza_RM-2007-Stress%20analysis%20of%20the%20machining%20process%20through%20the%20finite%20element%20method%20%28FEM%29%20the%20effect%20of.pdf
Trabalho de evento
Theoretical principles of peen forming: an experimental and numerical analysis (2007)
Benítez Barrios, Daniel; Calle Gonzales, Miguel Angel; Andrade, Arnaldo Homobono Paes de; Lima, Nelson Batista de ; Gonçalves, Edison
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: FADIGA DOS MATERIAIS, TENSÃO RESIDUAL, DEFORMAÇÃO ESTRUTURAL, ANÁLISE EXPERIMENTAL DE ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
BENÍTEZ BARRIOS, Daniel et al. Theoretical principles of peen forming: an experimental and numerical analysis. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/f4b281fc-0d39-47fd-847f-0ad4302f5422/Gon%C3%A7alves-2007-THEORETICAL%20PRINCIPLES%20OF%20PEEN%20FORMING%20AN%20EXPERIMENTAL%20ok.pdf. Acesso em: 27 set. 2024.
APA
Benítez Barrios, D., Calle Gonzales, M. A., Andrade, A. H. P. de, Lima, N. B. de, & Gonçalves, E. (2007). Theoretical principles of peen forming: an experimental and numerical analysis. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/f4b281fc-0d39-47fd-847f-0ad4302f5422/Gon%C3%A7alves-2007-THEORETICAL%20PRINCIPLES%20OF%20PEEN%20FORMING%20AN%20EXPERIMENTAL%20ok.pdf
NLM
Benítez Barrios D, Calle Gonzales MA, Andrade AHP de, Lima NB de, Gonçalves E. Theoretical principles of peen forming: an experimental and numerical analysis [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/f4b281fc-0d39-47fd-847f-0ad4302f5422/Gon%C3%A7alves-2007-THEORETICAL%20PRINCIPLES%20OF%20PEEN%20FORMING%20AN%20EXPERIMENTAL%20ok.pdf
Vancouver
Benítez Barrios D, Calle Gonzales MA, Andrade AHP de, Lima NB de, Gonçalves E. Theoretical principles of peen forming: an experimental and numerical analysis [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/f4b281fc-0d39-47fd-847f-0ad4302f5422/Gon%C3%A7alves-2007-THEORETICAL%20PRINCIPLES%20OF%20PEEN%20FORMING%20AN%20EXPERIMENTAL%20ok.pdf
Trabalho de evento
Quantitative estimation of a resistance spot weld quality using a simple model (2007)
Sampaio, Daniel Julien Barros da Silva; Moscato, Lucas Antonio ; Link, Norbert
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: ENSAIOS NÃO DESTRUTIVOS, SOLDAGEM ELÉTRICA (QUALIDADE), RESISTÊNCIA DOS MATERIAIS, REDES NEURAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SAMPAIO, Daniel Julien Barros da Silva e MOSCATO, Lucas Antonio e LINK, Norbert. Quantitative estimation of a resistance spot weld quality using a simple model. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/48e8627b-0d38-4e87-b090-f3c947fdd0d7/Moscato-2007-QUANTITATIVE%20ESTIMATION%20OF%20A%20RESISTANCE%20SPOT-cobem.pdf. Acesso em: 27 set. 2024.
APA
Sampaio, D. J. B. da S., Moscato, L. A., & Link, N. (2007). Quantitative estimation of a resistance spot weld quality using a simple model. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/48e8627b-0d38-4e87-b090-f3c947fdd0d7/Moscato-2007-QUANTITATIVE%20ESTIMATION%20OF%20A%20RESISTANCE%20SPOT-cobem.pdf
NLM
Sampaio DJB da S, Moscato LA, Link N. Quantitative estimation of a resistance spot weld quality using a simple model [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/48e8627b-0d38-4e87-b090-f3c947fdd0d7/Moscato-2007-QUANTITATIVE%20ESTIMATION%20OF%20A%20RESISTANCE%20SPOT-cobem.pdf
Vancouver
Sampaio DJB da S, Moscato LA, Link N. Quantitative estimation of a resistance spot weld quality using a simple model [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/48e8627b-0d38-4e87-b090-f3c947fdd0d7/Moscato-2007-QUANTITATIVE%20ESTIMATION%20OF%20A%20RESISTANCE%20SPOT-cobem.pdf
Trabalho de evento
Numerical analyses on the stress distribution in coated systems with perpendicular cracks under tensile loads (2007)
Angelo, Cristiane Martins; Fukumasu, Newton Kiyoshi ; Souza, Roberto Martins de (Orientador)
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidade: EP
Subjects: FILMES FINOS, TENSÃO DOS MATERIAIS, MECÂNICA DA FRATURA, MÉTODO DOS ELEMENTOS FINITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ANGELO, Cristiane Martins e FUKUMASU, Newton Kiyoshi. Numerical analyses on the stress distribution in coated systems with perpendicular cracks under tensile loads. 2007, Anais.. Brasília: ABCM, 2007. Disponível em: https://repositorio.usp.br/directbitstream/16b9adc1-f69d-4803-8ac9-5c95a6d344ff/Souza_RM-2007-NUMERICAL%20ANALYSES%20ON%20THE%20STRESS%20DISTRIBUTION%20IN.pdf. Acesso em: 27 set. 2024.
APA
Angelo, C. M., & Fukumasu, N. K. (2007). Numerical analyses on the stress distribution in coated systems with perpendicular cracks under tensile loads. In Proceedings of COBEM. Brasília: ABCM. Recuperado de https://repositorio.usp.br/directbitstream/16b9adc1-f69d-4803-8ac9-5c95a6d344ff/Souza_RM-2007-NUMERICAL%20ANALYSES%20ON%20THE%20STRESS%20DISTRIBUTION%20IN.pdf
NLM
Angelo CM, Fukumasu NK. Numerical analyses on the stress distribution in coated systems with perpendicular cracks under tensile loads [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/16b9adc1-f69d-4803-8ac9-5c95a6d344ff/Souza_RM-2007-NUMERICAL%20ANALYSES%20ON%20THE%20STRESS%20DISTRIBUTION%20IN.pdf
Vancouver
Angelo CM, Fukumasu NK. Numerical analyses on the stress distribution in coated systems with perpendicular cracks under tensile loads [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/16b9adc1-f69d-4803-8ac9-5c95a6d344ff/Souza_RM-2007-NUMERICAL%20ANALYSES%20ON%20THE%20STRESS%20DISTRIBUTION%20IN.pdf
Trabalho de evento
Experimental measurements of crack growth resistance curves for a pipeline steel using SE(T) fracture specimens (2007)
Piovatto, Roberto; Bose Filho, Waldek Wladimir ; Spinelli, Dirceu; Hippert Junior, Eduardo; Cravero, Sebastian; Ruggieri, Claudio
Source: Proceedings of COBEM. Conference titles: International Congress of Mechanical Engineering. Unidades: EESC, EP
Subjects: MECÂNICA DA FRATURA, TENACIDADE DOS MATERIAIS, PETRÓLEO (EXTRAÇÃO)
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PIOVATTO, Roberto et al. Experimental measurements of crack growth resistance curves for a pipeline steel using SE(T) fracture specimens. 2007, Anais.. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2007. Disponível em: https://repositorio.usp.br/directbitstream/b649ad5a-824e-459b-8b3f-567936a313c6/Ruggieri-2007-Experimental%20measurements%20of%20crack%20growth%20resistance%20curves.pdf. Acesso em: 27 set. 2024.
APA
Piovatto, R., Bose Filho, W. W., Spinelli, D., Hippert Junior, E., Cravero, S., & Ruggieri, C. (2007). Experimental measurements of crack growth resistance curves for a pipeline steel using SE(T) fracture specimens. In Proceedings of COBEM. Brasília: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/b649ad5a-824e-459b-8b3f-567936a313c6/Ruggieri-2007-Experimental%20measurements%20of%20crack%20growth%20resistance%20curves.pdf
NLM
Piovatto R, Bose Filho WW, Spinelli D, Hippert Junior E, Cravero S, Ruggieri C. Experimental measurements of crack growth resistance curves for a pipeline steel using SE(T) fracture specimens [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/b649ad5a-824e-459b-8b3f-567936a313c6/Ruggieri-2007-Experimental%20measurements%20of%20crack%20growth%20resistance%20curves.pdf
Vancouver
Piovatto R, Bose Filho WW, Spinelli D, Hippert Junior E, Cravero S, Ruggieri C. Experimental measurements of crack growth resistance curves for a pipeline steel using SE(T) fracture specimens [Internet]. Proceedings of COBEM. 2007 ;[citado 2024 set. 27 ] Available from: https://repositorio.usp.br/directbitstream/b649ad5a-824e-459b-8b3f-567936a313c6/Ruggieri-2007-Experimental%20measurements%20of%20crack%20growth%20resistance%20curves.pdf

USP Schools

ReP

Filtros

Departament

Authors

USP affiliated authors

Subjects

Normalized affiliation

Non normalized affiliation