Menu

Filtros : "Portugal" "EESC-SAA" Removido: "EDITOR DE PERIODICO" Limpar

Filtros

Refine with date range

1 - 20 (51 records)

  • Artigo de periodico

    On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads (2024)

    Christoff, Bruno Guilherme; Marques, Denys; Carmo, João Paulo Pereira do ; Braga, Maria Helena; Tita, Volnei

    Source: Mechanical Systems and Signal Processing. Unidade: EESC

    Subjects: POTENCIAL ELÉTRICO, SENSOR, BATERIAS ELÉTRICAS, ENGENHARIA ELÉTRICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CHRISTOFF, Bruno Guilherme et al. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads. Mechanical Systems and Signal Processing, v. 215, p. 1-13, 2024Tradução . . Disponível em: http://dx.doi.org/10.1016/j.ymssp.2024.111390. Acesso em: 12 jun. 2024.

    • APA

      Christoff, B. G., Marques, D., Carmo, J. P. P. do, Braga, M. H., & Tita, V. (2024). On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads. Mechanical Systems and Signal Processing, 215, 1-13. doi:10.1016/j.ymssp.2024.111390

    • NLM

      Christoff BG, Marques D, Carmo JPP do, Braga MH, Tita V. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-13.[citado 2024 jun. 12 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111390

    • Vancouver

      Christoff BG, Marques D, Carmo JPP do, Braga MH, Tita V. On the strain-sensing capabilities of a novel all-solid-state sodium-based-electrolyte battery under vibration loads [Internet]. Mechanical Systems and Signal Processing. 2024 ; 215 1-13.[citado 2024 jun. 12 ] Available from: http://dx.doi.org/10.1016/j.ymssp.2024.111390

  • Artigo de periodico

    Multiscale modelling of composite laminates with voids through the direct FE2 method (2024)

    Christoff, Bruno Guilherme; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Maciel, Maísa Milanez Ávila Dias; Guedes, Rui Miranda; Tita, Volnei

    Source: Theoretical and Applied Fracture Mechanics. Unidade: EESC

    Subjects: LAMINADOS, MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      CHRISTOFF, Bruno Guilherme et al. Multiscale modelling of composite laminates with voids through the direct FE2 method. Theoretical and Applied Fracture Mechanics, v. 131, p. 1-14, 2024Tradução . . Disponível em: https://dx.doi.org/10.1016/j.tafmec.2024.104424. Acesso em: 12 jun. 2024.

    • APA

      Christoff, B. G., Almeida Júnior, J. H. S., Ribeiro, M. L., Maciel, M. M. Á. D., Guedes, R. M., & Tita, V. (2024). Multiscale modelling of composite laminates with voids through the direct FE2 method. Theoretical and Applied Fracture Mechanics, 131, 1-14. doi:10.1016/j.tafmec.2024.104424

    • NLM

      Christoff BG, Almeida Júnior JHS, Ribeiro ML, Maciel MMÁD, Guedes RM, Tita V. Multiscale modelling of composite laminates with voids through the direct FE2 method [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-14.[citado 2024 jun. 12 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104424

    • Vancouver

      Christoff BG, Almeida Júnior JHS, Ribeiro ML, Maciel MMÁD, Guedes RM, Tita V. Multiscale modelling of composite laminates with voids through the direct FE2 method [Internet]. Theoretical and Applied Fracture Mechanics. 2024 ; 131 1-14.[citado 2024 jun. 12 ] Available from: https://dx.doi.org/10.1016/j.tafmec.2024.104424

  • Trabalho de evento

    On the obtainance of damage evolution laws for composite laminates via cyclic testing (2023)

    Souza, Gabriel Sales Candido; Farahani, Behzad V.; Guedes, Rui Miranda; Gerhardt, Eduardo; Amico, Sandro Campos; Tita, Volnei

    Conference titles: Ibero-American Conference on Composite Materials - IAMaC. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS DE FIBRAS, MECÂNICA DO DANO, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SOUZA, Gabriel Sales Candido et al. On the obtainance of damage evolution laws for composite laminates via cyclic testing. 2023, Anais.. São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf. Acesso em: 12 jun. 2024.

    • APA

      Souza, G. S. C., Farahani, B. V., Guedes, R. M., Gerhardt, E., Amico, S. C., & Tita, V. (2023). On the obtainance of damage evolution laws for composite laminates via cyclic testing. In . São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • NLM

      Souza GSC, Farahani BV, Guedes RM, Gerhardt E, Amico SC, Tita V. On the obtainance of damage evolution laws for composite laminates via cyclic testing [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • Vancouver

      Souza GSC, Farahani BV, Guedes RM, Gerhardt E, Amico SC, Tita V. On the obtainance of damage evolution laws for composite laminates via cyclic testing [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

  • Artigo de periodico

    Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis (2023)

    Silva, Ênio Henrique Pires da ; Barros, Silvio de ; Vieira, André Ferreira Costa ; Costa, Romeu Rony Cavalcante da ; Ribeiro, Marcelo Leite

    Source: Polymers. Unidade: EESC

    Subjects: SUSTENTABILIDADE, POLÍMEROS (MATERIAIS), ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Ênio Henrique Pires da et al. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis. Polymers, v. 15, n. 7, p. 1-18, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15071784. Acesso em: 12 jun. 2024.

    • APA

      Silva, Ê. H. P. da, Barros, S. de, Vieira, A. F. C., Costa, R. R. C. da, & Ribeiro, M. L. (2023). Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis. Polymers, 15( 7), 1-18. doi:10.3390/polym15071784

    • NLM

      Silva ÊHP da, Barros S de, Vieira AFC, Costa RRC da, Ribeiro ML. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis [Internet]. Polymers. 2023 ; 15( 7): 1-18.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym15071784

    • Vancouver

      Silva ÊHP da, Barros S de, Vieira AFC, Costa RRC da, Ribeiro ML. Accelerated aging on the compression properties of a green polyurethane foam: experimental and numerical analysis [Internet]. Polymers. 2023 ; 15( 7): 1-18.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym15071784

  • Artigo de periodico

    A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach (2023)

    Santana, Pedro Bührer; Gomes, Herbert Martins; Ferreira, António Mendes; Tita, Volnei

    Source: Latin American Journal of Solids and Structures. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS, MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURAS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SANTANA, Pedro Bührer et al. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach. Latin American Journal of Solids and Structures, v. 20, n. 6, p. 1-16, 2023Tradução . . Disponível em: http://dx.doi.org/10.1590/1679-78257577. Acesso em: 12 jun. 2024.

    • APA

      Santana, P. B., Gomes, H. M., Ferreira, A. M., & Tita, V. (2023). A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach. Latin American Journal of Solids and Structures, 20( 6), 1-16. doi:10.1590/1679-78257577

    • NLM

      Santana PB, Gomes HM, Ferreira AM, Tita V. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach [Internet]. Latin American Journal of Solids and Structures. 2023 ; 20( 6): 1-16.[citado 2024 jun. 12 ] Available from: http://dx.doi.org/10.1590/1679-78257577

    • Vancouver

      Santana PB, Gomes HM, Ferreira AM, Tita V. A multiobjective optimization framework for strength and stress concentration in variable axial composite shells: a metaheuristic approach [Internet]. Latin American Journal of Solids and Structures. 2023 ; 20( 6): 1-16.[citado 2024 jun. 12 ] Available from: http://dx.doi.org/10.1590/1679-78257577

  • Trabalho de evento-resumo

    Mechanical behaviour of SLJ composite joint via numerical methods and uncertainties considering different types of adhesives (2023)

    Dametto, Daniel; Silva, Jailto Antonio Prado da; Silva, Lucas F. M. da; Tita, Volnei ; Medeiros, Ricardo de

    Conference titles: Conferência Luso-Brasileira de Adesão e Adesivos - CLBA. Unidade: EESC

    Subjects: JUNTAS ESTRUTURAIS, ADESIVOS, MATERIAIS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      DAMETTO, Daniel et al. Mechanical behaviour of SLJ composite joint via numerical methods and uncertainties considering different types of adhesives. 2023, Anais.. São Carlos, SP: EESC, 2023. Disponível em: https://repositorio.usp.br/directbitstream/f8eb84b1-11b1-4771-914a-23bd82d9b6fc/3735-10031-1-PB.pdf. Acesso em: 12 jun. 2024.

    • APA

      Dametto, D., Silva, J. A. P. da, Silva, L. F. M. da, Tita, V., & Medeiros, R. de. (2023). Mechanical behaviour of SLJ composite joint via numerical methods and uncertainties considering different types of adhesives. In . São Carlos, SP: EESC. Recuperado de https://repositorio.usp.br/directbitstream/f8eb84b1-11b1-4771-914a-23bd82d9b6fc/3735-10031-1-PB.pdf

    • NLM

      Dametto D, Silva JAP da, Silva LFM da, Tita V, Medeiros R de. Mechanical behaviour of SLJ composite joint via numerical methods and uncertainties considering different types of adhesives [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/f8eb84b1-11b1-4771-914a-23bd82d9b6fc/3735-10031-1-PB.pdf

    • Vancouver

      Dametto D, Silva JAP da, Silva LFM da, Tita V, Medeiros R de. Mechanical behaviour of SLJ composite joint via numerical methods and uncertainties considering different types of adhesives [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/f8eb84b1-11b1-4771-914a-23bd82d9b6fc/3735-10031-1-PB.pdf

  • Trabalho de evento-resumo

    Parametric study of ENF bonded composite joints using design of experiments and CBBM method (2023)

    Silva, Jailto Antonio Prado da; Silva, Lucas F. M. da; Ferreira, Antonio J. M; Tita, Volnei ; Medeiros, Ricardo de

    Conference titles: Conferência Luso-Brasileira de Adesão e Adesivos - CLBA. Unidade: EESC

    Subjects: JUNTAS ESTRUTURAIS, MATERIAIS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Jailto Antonio Prado da et al. Parametric study of ENF bonded composite joints using design of experiments and CBBM method. 2023, Anais.. São Carlos, SP: EESC, 2023. Disponível em: https://repositorio.usp.br/directbitstream/babd580d-f79c-401e-8ed0-372e69db8704/3730-10024-1-PB%20%281%29.pdf. Acesso em: 12 jun. 2024.

    • APA

      Silva, J. A. P. da, Silva, L. F. M. da, Ferreira, A. J. M., Tita, V., & Medeiros, R. de. (2023). Parametric study of ENF bonded composite joints using design of experiments and CBBM method. In . São Carlos, SP: EESC. Recuperado de https://repositorio.usp.br/directbitstream/babd580d-f79c-401e-8ed0-372e69db8704/3730-10024-1-PB%20%281%29.pdf

    • NLM

      Silva JAP da, Silva LFM da, Ferreira AJM, Tita V, Medeiros R de. Parametric study of ENF bonded composite joints using design of experiments and CBBM method [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/babd580d-f79c-401e-8ed0-372e69db8704/3730-10024-1-PB%20%281%29.pdf

    • Vancouver

      Silva JAP da, Silva LFM da, Ferreira AJM, Tita V, Medeiros R de. Parametric study of ENF bonded composite joints using design of experiments and CBBM method [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/babd580d-f79c-401e-8ed0-372e69db8704/3730-10024-1-PB%20%281%29.pdf

  • Trabalho de evento

    On the use of novel all-solid-state battery as a composite structure damage sensor (2023)

    Marques, Denys Eduardo Teixeira; Cristhoff, Bruno Guilherme; Maciel, Maísa Milanez Ávila Dias; Ataabadi, Pouria; Carmo, João Paulo Pereira do ; Braga, Maria Helena; Guedes, Rui Miranda; Alves, Marcílio; Tita, Volnei

    Conference titles: Ibero-American Conference on Composite Materials - IAMaC. Unidades: EESC, EP

    Subjects: MECÂNICA DO DANO, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MARQUES, Denys Eduardo Teixeira et al. On the use of novel all-solid-state battery as a composite structure damage sensor. 2023, Anais.. São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf. Acesso em: 12 jun. 2024.

    • APA

      Marques, D. E. T., Cristhoff, B. G., Maciel, M. M. Á. D., Ataabadi, P., Carmo, J. P. P. do, Braga, M. H., et al. (2023). On the use of novel all-solid-state battery as a composite structure damage sensor. In . São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • NLM

      Marques DET, Cristhoff BG, Maciel MMÁD, Ataabadi P, Carmo JPP do, Braga MH, Guedes RM, Alves M, Tita V. On the use of novel all-solid-state battery as a composite structure damage sensor [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • Vancouver

      Marques DET, Cristhoff BG, Maciel MMÁD, Ataabadi P, Carmo JPP do, Braga MH, Guedes RM, Alves M, Tita V. On the use of novel all-solid-state battery as a composite structure damage sensor [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

  • Trabalho de evento

    Study of filament wound cylinders with vai in elastic conditions (2023)

    Maciel, Maísa Milanez Ávila Dias; Cristhoff, Bruno; Amico, Sandro Campos; Gerhardt, Eduardo; Ramos, Nuno Viriato; Tavares, Paulo; Guedes, Rui Miranda; Tita, Volnei

    Conference titles: Ibero-American Conference on Composite Materials - IAMaC. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS DE FIBRAS, ESTRUTURA DE AERONAVES, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MACIEL, Maísa Milanez Ávila Dias et al. Study of filament wound cylinders with vai in elastic conditions. 2023, Anais.. São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf. Acesso em: 12 jun. 2024.

    • APA

      Maciel, M. M. Á. D., Cristhoff, B., Amico, S. C., Gerhardt, E., Ramos, N. V., Tavares, P., et al. (2023). Study of filament wound cylinders with vai in elastic conditions. In . São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • NLM

      Maciel MMÁD, Cristhoff B, Amico SC, Gerhardt E, Ramos NV, Tavares P, Guedes RM, Tita V. Study of filament wound cylinders with vai in elastic conditions [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • Vancouver

      Maciel MMÁD, Cristhoff B, Amico SC, Gerhardt E, Ramos NV, Tavares P, Guedes RM, Tita V. Study of filament wound cylinders with vai in elastic conditions [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

  • Trabalho de evento

    Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law (2023)

    Silva, Jailton A. P. da; Beck, Rafael; Silva, Lucas F. M. da; Tita, Volnei ; Medeiros, Ricardo de

    Conference titles: Ibero-American Conference on Composite Materials - IAMaC. Unidade: EESC

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Jailton A. P. da et al. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law. 2023, Anais.. São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2023. Disponível em: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf. Acesso em: 12 jun. 2024.

    • APA

      Silva, J. A. P. da, Beck, R., Silva, L. F. M. da, Tita, V., & Medeiros, R. de. (2023). Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law. In . São Carlos, SP: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • NLM

      Silva JAP da, Beck R, Silva LFM da, Tita V, Medeiros R de. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

    • Vancouver

      Silva JAP da, Beck R, Silva LFM da, Tita V, Medeiros R de. Computational analysis of 2D-DCB bonded composite joints using trapezoidal traction separation law [Internet]. 2023 ;[citado 2024 jun. 12 ] Available from: https://www.eesc.usp.br/biblioteca-admin/wp-content/uploads/2023/11/iamac2023proceedings.pdf

  • Artigo de periodico

    Numerical approach to simulate the mechanical behavior of biodegradable polymers during erosion (2023)

    Vieira, André Ferreira Costa ; Silva, Ênio Henrique Pires da ; Ribeiro, Marcelo Leite

    Source: Polymers. Unidade: EESC

    Subjects: POLÍMEROS (MATERIAIS), PLÁSTICOS BIODEGRADÁVEIS, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VIEIRA, André Ferreira Costa e SILVA, Ênio Henrique Pires da e RIBEIRO, Marcelo Leite. Numerical approach to simulate the mechanical behavior of biodegradable polymers during erosion. Polymers, v. 15, n. 9, p. 1-25, 2023Tradução . . Disponível em: https://doi.org/10.3390/polym15091979. Acesso em: 12 jun. 2024.

    • APA

      Vieira, A. F. C., Silva, Ê. H. P. da, & Ribeiro, M. L. (2023). Numerical approach to simulate the mechanical behavior of biodegradable polymers during erosion. Polymers, 15( 9), 1-25. doi:10.3390/polym15091979

    • NLM

      Vieira AFC, Silva ÊHP da, Ribeiro ML. Numerical approach to simulate the mechanical behavior of biodegradable polymers during erosion [Internet]. Polymers. 2023 ; 15( 9): 1-25.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym15091979

    • Vancouver

      Vieira AFC, Silva ÊHP da, Ribeiro ML. Numerical approach to simulate the mechanical behavior of biodegradable polymers during erosion [Internet]. Polymers. 2023 ; 15( 9): 1-25.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym15091979

  • Artigo de periodico

    Angle of the perforation line to optimize partitioning efficiency on toilet papers (2023)

    Vieira, Joana Costa ; Vieira, Andre Costa; Ribeiro, Marcelo Leite ; Fiadeiro, Paulo Torrão; Costa, Ana Paula

    Source: Eng. Unidade: EESC

    Assunto: ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VIEIRA, Joana Costa et al. Angle of the perforation line to optimize partitioning efficiency on toilet papers. Eng, v. 4, n. 1, p. 80-91, 2023Tradução . . Disponível em: https://doi.org/10.3390/eng4010005. Acesso em: 12 jun. 2024.

    • APA

      Vieira, J. C., Vieira, A. C., Ribeiro, M. L., Fiadeiro, P. T., & Costa, A. P. (2023). Angle of the perforation line to optimize partitioning efficiency on toilet papers. Eng, 4( 1), 80-91. doi:10.3390/eng4010005

    • NLM

      Vieira JC, Vieira AC, Ribeiro ML, Fiadeiro PT, Costa AP. Angle of the perforation line to optimize partitioning efficiency on toilet papers [Internet]. Eng. 2023 ; 4( 1): 80-91.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/eng4010005

    • Vancouver

      Vieira JC, Vieira AC, Ribeiro ML, Fiadeiro PT, Costa AP. Angle of the perforation line to optimize partitioning efficiency on toilet papers [Internet]. Eng. 2023 ; 4( 1): 80-91.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/eng4010005

  • Artigo de periodico

    Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications (2022)

    Saconi, Felipe; Hincapie Diaz, Geraldine; Vieira, Andre Costa; Ribeiro, Marcelo Leite

    Source: Materials. Unidade: EESC

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, LIGAS METÁLICAS, CORROSÃO, ENGENHARIA AERONÁUTICA

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SACONI, Felipe et al. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications. Materials, v. 15, n. 20, p. 1-20, 2022Tradução . . Disponível em: https://doi.org/10.3390/ma15207164. Acesso em: 12 jun. 2024.

    • APA

      Saconi, F., Hincapie Diaz, G., Vieira, A. C., & Ribeiro, M. L. (2022). Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications. Materials, 15( 20), 1-20. doi:10.3390/ma15207164

    • NLM

      Saconi F, Hincapie Diaz G, Vieira AC, Ribeiro ML. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications [Internet]. Materials. 2022 ; 15( 20): 1-20.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/ma15207164

    • Vancouver

      Saconi F, Hincapie Diaz G, Vieira AC, Ribeiro ML. Experimental characterization and numerical modeling of the corrosion effect on the mechanical properties of the biodegradable magnesium alloy WE43 for orthopedic applications [Internet]. Materials. 2022 ; 15( 20): 1-20.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/ma15207164

  • Trabalho de evento

    Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I (2022)

    Madureira, Fernando ; Silva, Lucas Filipe Martins da ; Tita, Volnei

    Source: The Journal of Adhesion. Unidade: EESC

    Subjects: JUNTAS ESTRUTURAIS, VIBRAÇÕES, ENGENHARIA AERONÁUTICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      MADUREIRA, Fernando e SILVA, Lucas Filipe Martins da e TITA, Volnei. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I. 2022, Anais.. New York, NY, USA: Taylor & Francis, 2022. p. 1-22. Disponível em: https://doi.org/10.1080/00218464.2022.2144731. Acesso em: 12 jun. 2024.

    • APA

      Madureira, F., Silva, L. F. M. da, & Tita, V. (2022). Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I. In The Journal of Adhesion (p. 1-22). New York, NY, USA: Taylor & Francis. doi:10.1080/00218464.2022.2144731

    • NLM

      Madureira F, Silva LFM da, Tita V. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I [Internet]. The Journal of Adhesion. 2022 ; 1-22.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1080/00218464.2022.2144731

    • Vancouver

      Madureira F, Silva LFM da, Tita V. Compliance methods for bonded joints: part I - investigation of the standardized methods to obtain the strain energy release rate for mode I [Internet]. The Journal of Adhesion. 2022 ; 1-22.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1080/00218464.2022.2144731

  • Artigo de periodico

    A finite element unified formulation for composite laminates in bending considering progressive damage (2022)

    Ferreira, Gregório Felipe Oliveira; Almeida Júnior, José Humberto Santos; Ribeiro, Marcelo Leite ; Ferreira, Antonio J. M.; Tita, Volnei

    Source: Thin-Walled Structures. Unidade: EESC

    Subjects: MECÂNICA DO DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA MECÂNICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERREIRA, Gregório Felipe Oliveira et al. A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, v. 172, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1016/j.tws.2021.108864. Acesso em: 12 jun. 2024.

    • APA

      Ferreira, G. F. O., Almeida Júnior, J. H. S., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2022). A finite element unified formulation for composite laminates in bending considering progressive damage. Thin-Walled Structures, 172, 1-13. doi:10.1016/j.tws.2021.108864

    • NLM

      Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.tws.2021.108864

    • Vancouver

      Ferreira GFO, Almeida Júnior JHS, Ribeiro ML, Ferreira AJM, Tita V. A finite element unified formulation for composite laminates in bending considering progressive damage [Internet]. Thin-Walled Structures. 2022 ; 172 1-13.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.tws.2021.108864

  • Artigo de periodico

    Embossing lines and dots geometry effect on the key tissue paper properties with finite element method analysis (2022)

    Vieira, Joana Costa; Mendes, António de O.; Ribeiro, Marcelo Leite ; Vieira, André Costa; Carta, Ana Margarida; Fiadeiro, Paulo Torrão; Costa, Ana Paula

    Source: Polymers. Unidade: EESC

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, PAPEL, MATERIAIS

    Versão PublicadaAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      VIEIRA, Joana Costa et al. Embossing lines and dots geometry effect on the key tissue paper properties with finite element method analysis. Polymers, v. 14, n. 17, p. 1-18, 2022Tradução . . Disponível em: https://doi.org/10.3390/polym14173448. Acesso em: 12 jun. 2024.

    • APA

      Vieira, J. C., Mendes, A. de O., Ribeiro, M. L., Vieira, A. C., Carta, A. M., Fiadeiro, P. T., & Costa, A. P. (2022). Embossing lines and dots geometry effect on the key tissue paper properties with finite element method analysis. Polymers, 14( 17), 1-18. doi:10.3390/polym14173448

    • NLM

      Vieira JC, Mendes A de O, Ribeiro ML, Vieira AC, Carta AM, Fiadeiro PT, Costa AP. Embossing lines and dots geometry effect on the key tissue paper properties with finite element method analysis [Internet]. Polymers. 2022 ; 14( 17): 1-18.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym14173448

    • Vancouver

      Vieira JC, Mendes A de O, Ribeiro ML, Vieira AC, Carta AM, Fiadeiro PT, Costa AP. Embossing lines and dots geometry effect on the key tissue paper properties with finite element method analysis [Internet]. Polymers. 2022 ; 14( 17): 1-18.[citado 2024 jun. 12 ] Available from: https://doi.org/10.3390/polym14173448

  • Trabalho de evento

    Unified formulation for composite plate structures: implementation and evaluation (2021)

    Ferreira, Gregório Felipe Oliveira; Almeida Junior, Humberto; Ribeiro, Marcelo Leite ; Ferreira, Antonio Joaquim Mendes; Tita, Volnei

    Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC

    Assunto: MATERIAIS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      FERREIRA, Gregório Felipe Oliveira et al. Unified formulation for composite plate structures: implementation and evaluation. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf. Acesso em: 12 jun. 2024.

    • APA

      Ferreira, G. F. O., Almeida Junior, H., Ribeiro, M. L., Ferreira, A. J. M., & Tita, V. (2021). Unified formulation for composite plate structures: implementation and evaluation. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf

    • NLM

      Ferreira GFO, Almeida Junior H, Ribeiro ML, Ferreira AJM, Tita V. Unified formulation for composite plate structures: implementation and evaluation [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf

    • Vancouver

      Ferreira GFO, Almeida Junior H, Ribeiro ML, Ferreira AJM, Tita V. Unified formulation for composite plate structures: implementation and evaluation [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/09980f38-aef9-4932-8579-98a0f9bc468e/3032-8274-1-PB.pdf

  • Artigo de periodico

    Novel progressive failure model for quasi-orthotropic pultruded FRP structures: application to compact tension and web-crippling case studies (Part II) (2021)

    Gonilha, Jose A.; Silvestre, Nuno; Correia, João R.; Tita, Volnei ; Fernandes, Lourenço Almeida

    Source: Composite Structures. Unidade: EESC

    Subjects: MATERIAIS COMPÓSITOS DE FIBRAS, DANO, ENGENHARIA AERONÁUTICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GONILHA, Jose A. et al. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: application to compact tension and web-crippling case studies (Part II). Composite Structures, v. 255, p. 1-16, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2020.112973. Acesso em: 12 jun. 2024.

    • APA

      Gonilha, J. A., Silvestre, N., Correia, J. R., Tita, V., & Fernandes, L. A. (2021). Novel progressive failure model for quasi-orthotropic pultruded FRP structures: application to compact tension and web-crippling case studies (Part II). Composite Structures, 255, 1-16. doi:10.1016/j.compstruct.2020.112973

    • NLM

      Gonilha JA, Silvestre N, Correia JR, Tita V, Fernandes LA. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: application to compact tension and web-crippling case studies (Part II) [Internet]. Composite Structures. 2021 ; 255 1-16.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112973

    • Vancouver

      Gonilha JA, Silvestre N, Correia JR, Tita V, Fernandes LA. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: application to compact tension and web-crippling case studies (Part II) [Internet]. Composite Structures. 2021 ; 255 1-16.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112973

  • Trabalho de evento

    Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model (2021)

    Silva, Jailto Antonio Prado da; Silva, Lucas Filipe Martins da; Ribeiro, Marcelo Leite ; Tita, Volnei

    Source: Proceedings of BCCM 5. Conference titles: Brazilian Conference on Composite Materials - BCCM. Unidade: EESC

    Subjects: MÉTODO DOS ELEMENTOS FINITOS, ESTRUTURA DE AERONAVES, MATERIAIS

    Versão PublicadaHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      SILVA, Jailto Antonio Prado da et al. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model. 2021, Anais.. São Carlos, SP: EESC/USP, 2021. Disponível em: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf. Acesso em: 12 jun. 2024.

    • APA

      Silva, J. A. P. da, Silva, L. F. M. da, Ribeiro, M. L., & Tita, V. (2021). Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model. In Proceedings of BCCM 5. São Carlos, SP: EESC/USP. Recuperado de https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf

    • NLM

      Silva JAP da, Silva LFM da, Ribeiro ML, Tita V. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf

    • Vancouver

      Silva JAP da, Silva LFM da, Ribeiro ML, Tita V. Modelling of SLJ bonded joints with different adhesion degrees using cohesive zone model [Internet]. Proceedings of BCCM 5. 2021 ;[citado 2024 jun. 12 ] Available from: https://repositorio.usp.br/directbitstream/61dd665f-ceba-452b-b5e4-e4a0bd7de4aa/2989-8201-1-PB.pdf

  • Artigo de periodico

    Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) (2021)

    Gonilha, Jose A.; Silvestre, Nuno; Correia, João R.; Tita, Volnei ; Martins, David

    Source: Composite Structures. Unidade: EESC

    Subjects: DANO, MÉTODO DOS ELEMENTOS FINITOS, ENGENHARIA AERONÁUTICA

    PrivadoAcesso à fonteDOIHow to cite
    A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas

    • ABNT

      GONILHA, Jose A. et al. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I). Composite Structures, v. 255, p. 1-22, 2021Tradução . . Disponível em: https://doi.org/10.1016/j.compstruct.2020.112974. Acesso em: 12 jun. 2024.

    • APA

      Gonilha, J. A., Silvestre, N., Correia, J. R., Tita, V., & Martins, D. (2021). Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I). Composite Structures, 255, 1-22. doi:10.1016/j.compstruct.2020.112974

    • NLM

      Gonilha JA, Silvestre N, Correia JR, Tita V, Martins D. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) [Internet]. Composite Structures. 2021 ; 255 1-22.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112974

    • Vancouver

      Gonilha JA, Silvestre N, Correia JR, Tita V, Martins D. Novel progressive failure model for quasi-orthotropic pultruded FRP structures: formulation and calibration of parameters (Part I) [Internet]. Composite Structures. 2021 ; 255 1-22.[citado 2024 jun. 12 ] Available from: https://doi.org/10.1016/j.compstruct.2020.112974

1 - 20 (51 records)

Digital Library of Intellectual Production of Universidade de São Paulo     2012 - 2024