Liquid phase sintering and characterization of SiC ceramics (2018)
- Authors:
- Autor USP: RIBEIRO, SEBASTIAO - EEL
- Unidade: EEL
- DOI: 10.1016/j.ceramint.2018.03.083
- Subjects: MATERIAIS; REFRATÁRIOS
- Keywords: B. Microstructure-final; C. Toughness; Flexural strength; Weibull module; D. SiC; Liquid phase sintering
- Agências de fomento:
- Language: Inglês
- Abstract: The present study focuses on the sintering of silicon carbide-based ceramics (SiC) by liquid phase sintering (LPS) followed by characterization of the produced ceramics. AlN/Re2O3 mixtures were used as additives in the LPS process. In the first step, the LPS-SiC materials were produced in a graphite resistance furnace in the form of discs at different temperatures. The conditions with the best results regarding real density and relative density were taken as reference for sintering in the form of prismatic bars. In the second step, these samples were evaluated regarding fracture toughness (KIC), by the Single Edge V Notch Beam – SEVNB – method, and flexural strength. KIC behavior was evaluated according to the depth and curvature radius of the notches. Reliable KIC values were presented when the ceramic displayed a small curvature radius at the notch tip. When the radius was large, it did not maintain the square root singularity of the notch tip. Tests were carried out to determine KIC values in atmospheric air and water. KIC results were lower in water than air, with a decrease ranging between 2.56% and 11.26%. The observations indicated a direct grain size correlation between KIC values and fracture strength of the SiC ceramics.
- Imprenta:
- Source:
- Título: Ceramics international
- ISSN: 0272-8842
- Volume/Número/Paginação/Ano: v. 44, n. 10, p.11048-11059, 2018
- Este periódico é de acesso aberto
- Este artigo NÃO é de acesso aberto
-
ABNT
SANTOS, Aline C e RIBEIRO, Sebastião. Liquid phase sintering and characterization of SiC ceramics. Ceramics international, v. 44, n. 10, p. 11048-11059, 2018Tradução . . Disponível em: https://doi.org/10.1016/j.ceramint.2018.03.083. Acesso em: 10 fev. 2026. -
APA
Santos, A. C., & Ribeiro, S. (2018). Liquid phase sintering and characterization of SiC ceramics. Ceramics international, 44( 10), 11048-11059. doi:10.1016/j.ceramint.2018.03.083 -
NLM
Santos AC, Ribeiro S. Liquid phase sintering and characterization of SiC ceramics [Internet]. Ceramics international. 2018 ; 44( 10): 11048-11059.[citado 2026 fev. 10 ] Available from: https://doi.org/10.1016/j.ceramint.2018.03.083 -
Vancouver
Santos AC, Ribeiro S. Liquid phase sintering and characterization of SiC ceramics [Internet]. Ceramics international. 2018 ; 44( 10): 11048-11059.[citado 2026 fev. 10 ] Available from: https://doi.org/10.1016/j.ceramint.2018.03.083 - Effect of heating rate on the shrinkage and microstructure of liquid phase sintered SiC ceramics
- Efeito da temperatura de queima no módulo de elasticidade e na resistência ao dano por choque térmico de um concreto refratário aluminoso
- Influência da temperatura de queima na energia de fratura de um concreto refratário aluminoso
- Efeito do protocolo de jateamento de cerâmicas a base de Zircônia na translucidez de próteses dentarias
- Optimization of the process of obtaining RE 2 O 3 from xenotime using statistical design
- Influência da distribuição granulométrica no tempo de secagem e na porosidade de uma cerâmica refratária monolítica
- Efeito da temperatura de queima nos módulos de elasticidade e de ruptura de um concreto refratário
- Comparison between different fracture toughness techniques in zirconia dental ceramics
- Avaliação da resistência ao dano por choque térmico de um concreto refratário aluminoso: ciclagem e R????
- PROPRIEDADES ÓPTICAS E MECÂNICAS DE ZrO2 ESTABILIZADA COM DIFERENTES TEORES DE Y2O3
Informações sobre o DOI: 10.1016/j.ceramint.2018.03.083 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
