Influence of sintering parameters on the microstructure and mechanical properties of nano-sized 3Y-TZP ceramics (2021)
- Authors:
- Autor USP: RODRIGUES JUNIOR, DURVAL - EEL
- Unidade: EEL
- DOI: 10.1590/0366-69132021673812908
- Assunto: SINTERIZAÇÃO
- Keywords: 3Y-TZP; nanosized powder; sintering; microstructure; t->m transformation toughening mechanism
- Agências de fomento:
- Language: Inglês
- Abstract: The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2 -3 mol% Y2 O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relative densities ranging between 92% and 98%, which increased with increasing isothermal duration, while samples sintered at 1300, 1350, or 1400 °C achieved densification higher than 98% for all isothermal treatments. Crystallographic analysis indicated the presence of a highly transformable ZrO2 -tetragonal phase (c/a√2= 1.0148-1.0154) for all conditions studied. The average grain size ranged from 0.18±0.04 mm (1250 °C-0 h) to 0.64±0.08 mm (1400 °C-16 h), indicating activation energy of 141.3 kJ/mol for grain growth and a growth exponent of 2.8. Both Vickers hardness (1025 to 1300 HV) and fracture toughness (4.0 to 7.8 MPa.m1/2) increased with increasing sintering temperature and time due to increased densification, reduced porosity, and maintenance of potentially high fracture toughness by the t m phase transformation.
- Imprenta:
- Publisher: ABC
- Publisher place: São Paulo-SP
- Date published: 2021
- Source:
- Status:
- Artigo publicado em periódico de acesso aberto (Gold Open Access)
- Versão do Documento:
- Versão publicada (Published version)
- Acessar versão aberta:
-
ABNT
PALMEIRA, Alexandre Alvarenga et al. Influence of sintering parameters on the microstructure and mechanical properties of nano-sized 3Y-TZP ceramics. Cerâmica, v. 67, p. 14-22, 2021Tradução . . Disponível em: https://doi.org/10.1590/0366-69132021673812908. Acesso em: 02 abr. 2026. -
APA
Palmeira, A. A., Cangani, M. P., Rodrigues Jr, D., Strecker, K., & Santos, C. dos. (2021). Influence of sintering parameters on the microstructure and mechanical properties of nano-sized 3Y-TZP ceramics. Cerâmica, 67, 14-22. doi:10.1590/0366-69132021673812908 -
NLM
Palmeira AA, Cangani MP, Rodrigues Jr D, Strecker K, Santos C dos. Influence of sintering parameters on the microstructure and mechanical properties of nano-sized 3Y-TZP ceramics [Internet]. Cerâmica. 2021 ;67 14-22.[citado 2026 abr. 02 ] Available from: https://doi.org/10.1590/0366-69132021673812908 -
Vancouver
Palmeira AA, Cangani MP, Rodrigues Jr D, Strecker K, Santos C dos. Influence of sintering parameters on the microstructure and mechanical properties of nano-sized 3Y-TZP ceramics [Internet]. Cerâmica. 2021 ;67 14-22.[citado 2026 abr. 02 ] Available from: https://doi.org/10.1590/0366-69132021673812908 - Development of High-Performance Superconducting Materials for Practical Applications
- Analysis of low cost Physics experiment using the software Tracker
- Caracterização da Hidroxiapatita obtida de osso bovino de regiões diferentes para retenção de chumbo
- Optimization of Properties and Characteristics of Superconducting Materials for Applications
- Effect of Isothermal on the Heat Treatment of Ag/Bi2212 Superconducting Tapes
- Tendências sustentáveis no uso de compósitos poliméricos para aplicação na indústria automotiva: uma proposta de reutilização do lixo marítimo com reforço de fibras naturais
- Musicalização Infantil - Objetos de Aprendizagem - Elementos Rítmicos - Série 1
- Nondestructive analysis of Bi2212 bulk superconducting ceramics in the C-axis direction
- A new proposal of Terminations for HTS Power Cables
- Musicalização Infantil - Objetos de Aprendizagem - Elementos Melódicos - Série 1
Informações sobre a disponibilidade de versões do artigo em acesso aberto coletadas automaticamente via oaDOI API (Unpaywall).
Por se tratar de integração com serviço externo, podem existir diferentes versões do trabalho (como preprints ou postprints), que podem diferir da versão publicada.
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
