Diamond turning of epoxy nanocomposite resin reinforced by multiwalled carbon nanotube and surface integrity evaluation (2013)
- Authors:
- Autor USP: JASINEVICIUS, RENATO GOULART - EESC
- Unidade: EESC
- Subjects: TORNEAMENTO; NANOCOMPOSITOS; ENGENHARIA MECÂNICA
- Agências de fomento:
- Language: Inglês
- Imprenta:
- Publisher place: Berlin, Germany
- Date published: 2013
- Source:
- Título: Proceedings
- Conference titles: Euspen International Conference & Exibition
-
ABNT
JASINEVICIUS, Renato Goulart et al. Diamond turning of epoxy nanocomposite resin reinforced by multiwalled carbon nanotube and surface integrity evaluation. 2013, Anais.. Berlin, Germany: Escola de Engenharia de São Carlos, Universidade de São Paulo, 2013. Disponível em: https://repositorio.usp.br/directbitstream/27a9b251-2fe5-4085-8d2d-013072afc534/OK___trabalho%2024%20-%20Diamond%20turning%20of%20epoxy%20nanocomposite%20resin%20reinforced%20by%20multiwalled%20carbon%20nanotube%20and%20surface%20integrity%20evaluation%20%28euspen%202013%29.pdf. Acesso em: 22 jan. 2026. -
APA
Jasinevicius, R. G., Chicuta, E. J. T., Demont, P., & Puech, P. (2013). Diamond turning of epoxy nanocomposite resin reinforced by multiwalled carbon nanotube and surface integrity evaluation. In Proceedings. Berlin, Germany: Escola de Engenharia de São Carlos, Universidade de São Paulo. Recuperado de https://repositorio.usp.br/directbitstream/27a9b251-2fe5-4085-8d2d-013072afc534/OK___trabalho%2024%20-%20Diamond%20turning%20of%20epoxy%20nanocomposite%20resin%20reinforced%20by%20multiwalled%20carbon%20nanotube%20and%20surface%20integrity%20evaluation%20%28euspen%202013%29.pdf -
NLM
Jasinevicius RG, Chicuta EJT, Demont P, Puech P. Diamond turning of epoxy nanocomposite resin reinforced by multiwalled carbon nanotube and surface integrity evaluation [Internet]. Proceedings. 2013 ;[citado 2026 jan. 22 ] Available from: https://repositorio.usp.br/directbitstream/27a9b251-2fe5-4085-8d2d-013072afc534/OK___trabalho%2024%20-%20Diamond%20turning%20of%20epoxy%20nanocomposite%20resin%20reinforced%20by%20multiwalled%20carbon%20nanotube%20and%20surface%20integrity%20evaluation%20%28euspen%202013%29.pdf -
Vancouver
Jasinevicius RG, Chicuta EJT, Demont P, Puech P. Diamond turning of epoxy nanocomposite resin reinforced by multiwalled carbon nanotube and surface integrity evaluation [Internet]. Proceedings. 2013 ;[citado 2026 jan. 22 ] Available from: https://repositorio.usp.br/directbitstream/27a9b251-2fe5-4085-8d2d-013072afc534/OK___trabalho%2024%20-%20Diamond%20turning%20of%20epoxy%20nanocomposite%20resin%20reinforced%20by%20multiwalled%20carbon%20nanotube%20and%20surface%20integrity%20evaluation%20%28euspen%202013%29.pdf - Tuning the photoconductivity of Co3O4 thin films by defect engineering
- Influence of tool neck length on tool deflections during micromilling of an ultrafine grained low-carbon steel
- Machinability study of single crystal silicon in ultraprecision machining
- Diamond tool wear analysis during machining of microstructure surface for microinjection molding
- Avaliação da transformada de Fourier em sinais de força de usinagem
- On the possibility of produce microstructures in soft semiconductors by diamond turning based upon transition pressure value concept
- Efeito do avanço por dente na usinagem de moldes e matrizes
- Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool
- Estudo por espectroscopia micro-Raman de transições de fase do 'SI' submetido a pressão não hidrostática
- Influência da estrutura da zircônia estabilizada com ítria sobre a transição frágil-dúctil durante retificação com rebolo de diamante
Download do texto completo
| Tipo | Nome | Link | |
|---|---|---|---|
 |
OK___trabalho 24 - Diamon... |
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
