Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy (2019)
- Authors:
- Autor USP: BARBOZA, MIGUEL JUSTINO RIBEIRO - EEL
- Unidade: EEL
- DOI: 10.1016/j.surfcoat.2019.04.095
- Subjects: CORROSÃO; CORROSÃO DOS MATERIAIS
- Agências de fomento:
- Language: Inglês
- Abstract: Aluminum alloys are mainly used in aircraft's structural components, which present the fatigue process as a predominant failure mode. The fact that there are many airports in coastal regions makes the study of aluminum alloy corrosive processes relevant as localized corrosion causes adverse effects on mechanical properties of the material. Plasma nitriding is an alternative method of raising surface hardness, fatigue resistance, wear and corrosion of alloys, there is a trend to expand the applicability of the plasma nitriding process through utilization of new materials and nitriding of aluminum and its alloys would be of greatest interest. In order to improve the corrosion behavior of 7075-T6 aluminum alloy, this work evaluated and compared the effect of RRA thermal treatment and plasma nitriding on the corrosion behavior of AA7075-T6 alloy. The tests were performed in 3.5%wt NaCl solution at room temperature (~25 °C) and pH ~ 6. The linear potentiodynamic polarization study showed that RRA thermal treatment and plasma nitriding were effective in improving corrosion behavior in saline solution. The protective efficiency of plasma nitriding was 64.2% and RRA treatment was 18.4%. The corrosive process at the T6 condition was deeper and generalized, with a high concentration of corrosion pits. For the RRA condition, the process was less generalized and not so deep, while in the plasma nitrided condition it was more localized and superficial, preserving much of the exposed surface in the corrosion tests. These results can be considered very promising by indicating an increase in the useful life of this material. This directly implies a consequent reduction in the preventive maintenance costs of the industries that use this alloy, as replacing damaged parts that have been treated by the plasma assisted technique used in this study may be performed at longer time intervals than the alloy partsthat have been treated by the plasma assisted technique used in this study may be performed at longer time intervals than the alloy parts without any kind of treatment.
- Imprenta:
- Source:
- Título do periódico: Surface & coatings technology
- ISSN: 02578972
- Volume/Número/Paginação/Ano: v.374, p.736-744, 2019
- Este periódico é de assinatura
- Este artigo NÃO é de acesso aberto
- Cor do Acesso Aberto: closed
-
ABNT
SAVONOV, Graziela da Silva et al. Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy. Surface & coatings technology, v. 374, p. 736-744, 2019Tradução . . Disponível em: https://doi.org/10.1016/j.surfcoat.2019.04.095. Acesso em: 03 maio 2024. -
APA
Savonov, G. da S., Camarinha, M. G. G., Rocha, L. O., Barboza, M. J. R., Martins, G. V., & Reis, D. A. P. (2019). Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy. Surface & coatings technology, 374, 736-744. doi:10.1016/j.surfcoat.2019.04.095 -
NLM
Savonov G da S, Camarinha MGG, Rocha LO, Barboza MJR, Martins GV, Reis DAP. Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy [Internet]. Surface & coatings technology. 2019 ;374 736-744.[citado 2024 maio 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.04.095 -
Vancouver
Savonov G da S, Camarinha MGG, Rocha LO, Barboza MJR, Martins GV, Reis DAP. Study of the influence of the RRA thermal treatment and plasma nitriding on corrosion behavior of 7075-T6 aluminum alloy [Internet]. Surface & coatings technology. 2019 ;374 736-744.[citado 2024 maio 03 ] Available from: https://doi.org/10.1016/j.surfcoat.2019.04.095 - Improving corrosion resistance of Ti–6Al–4V alloy through plasma-assisted PVD deposited nitride coatings
- Nitride coatings improve Ti-6Al-4V alloy behavior in creep tests
- Corrosion behavior analysis of plasma-assited PVD coated Ti-6Al-4V alloy in 2 M NaOH solution
- Effect of the interrupted aging heat treatment T6I4 on the tensile properties and fatigue resistance of AA7050 alloy
- On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys.
- Borocarbide coarsening and the effect of borocarbide particle size on Charpy V-notch impact properties of medium-carbon boron-containing steel
Informações sobre o DOI: 10.1016/j.surfcoat.2019.04.095 (Fonte: oaDOI API)
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
