Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts (2012)
- Authors:
- Autor USP: RIBATSKI, GHERHARDT - EESC
- Unidade: EESC
- DOI: 10.1016/j.ijmultiphaseflow.2012.07.003
- Subjects: TUBOS (AVALIAÇÃO); MECÂNICA DOS FLUÍDOS
- Language: Inglês
- Imprenta:
- Publisher place: Kidlington
- Date published: 2012
- Source:
- Título: International Journal of Multiphase Flow
- ISSN: 0301-9322
- Volume/Número/Paginação/Ano: v. 47, p. 50-65, Dec. 2012
- Status:
- Artigo possui versão em acesso aberto em repositório (Green Open Access)
- Versão do Documento:
- Versão publicada (Published version)
- Acessar versão aberta:
-
ABNT
KANIZAWA, Fabio Toshio e RIBATSKI, Gherhardt. Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts. International Journal of Multiphase Flow, v. 47, p. 50-65, 2012Tradução . . Disponível em: https://doi.org/10.1016/j.ijmultiphaseflow.2012.07.003. Acesso em: 18 abr. 2026. -
APA
Kanizawa, F. T., & Ribatski, G. (2012). Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts. International Journal of Multiphase Flow, 47, 50-65. doi:10.1016/j.ijmultiphaseflow.2012.07.003 -
NLM
Kanizawa FT, Ribatski G. Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts [Internet]. International Journal of Multiphase Flow. 2012 ; 47 50-65.[citado 2026 abr. 18 ] Available from: https://doi.org/10.1016/j.ijmultiphaseflow.2012.07.003 -
Vancouver
Kanizawa FT, Ribatski G. Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts [Internet]. International Journal of Multiphase Flow. 2012 ; 47 50-65.[citado 2026 abr. 18 ] Available from: https://doi.org/10.1016/j.ijmultiphaseflow.2012.07.003 - An overview of studies concerning condensation, pool and flow boiling performed at the Department of Mechanical Engineering of Escola de Engenharia de São Carlos of University of São Paulo
- Experimental pressure drop and flow pattern results during flow boiling of R134A inside horizontal tube
- Avaliação do coeficiente de transferência de calor durante o escoamento monofásico e a ebulição convectiva de nanofluidos
- Estudo teórico da perda de pressão para escoamentos bifásicos no interior de tubos com fitas retorcidas
- Determinação do ângulo de contato estático de nanofluidos de alumina tendo a água como fluido base
- Experimental evaluation of the heat transfer coeficient during flow boiling of di-water in a stainless steel tube coated with 'SI''O IND.2' nanoparticles
- Experimental study on the viscosity of 'AL IND.2''O IND.3' water nanofluid
- A Robust method for both in-situ dynamic calibration and signal compensation of thermocouples measurements
- The effect of footprint orientation on the performance of a heat spreader based on flow boiling inside micro-scale channels
- Experimental and numerical simulation of single-phase flow in a micro heat spreader applied to the cold start of internal combustion engines fueled with ethanol
Informações sobre a disponibilidade de versões do artigo em acesso aberto coletadas automaticamente via oaDOI API (Unpaywall).
Por se tratar de integração com serviço externo, podem existir diferentes versões do trabalho (como preprints ou postprints), que podem diferir da versão publicada.
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
