Effects of chemical composition on the corrosion of dental alloys (2012)
- Authors:
- USP affiliated authors: RIBEIRO, RICARDO FARIA - FORP ; FERRACIOLI, RENATA CRISTINA SILVEIRA RODRIGUES - FORP ; MATTOS, MARIA DA GLORIA CHIARELLO DE - FORP
- Unidade: FORP
- DOI: 10.1590/S0103-64402012000200009
- Subjects: LIGAS DENTÁRIAS; CORROSÃO (ANÁLISE); SALIVA ARTIFICIAL (EFEITOS); ESPECTROSCOPIA; MÉTODO ELETROQUÍMICO
- Language: Inglês
- Abstract: O objetivo deste estudo foi determinar o efeito do ambiente bucal na corrosão de diferentes ligas odontológicas, utilizando métodos eletroquímicos. Os índices de corrosão foram obtidos por meio das curvas de corrente-potencial e impedância eletroquímica (EIS). O efeito de saliva artificial na corrosão de ligas odontológicas foi dependente da composição. A dissolução dos íons ocorreu em todas as amostras e os resultados foram dependentes da composição da liga. Algumas mudanças na microestrutura foram observadas durante o estudo e influenciou o comportamento corrosivo das ligas investigadas. As ligas de Ni-Cr e Ni-Cr-Ti libertaram quantidade de 0,62 mg/L de íons Ni enquanto a liga de Co-Cr liberou entre 0,01 e 0,03 mg/L. As curvas potenciodinâmicas das ligas odontológicas mostraram que as ligas a base >70 wt% de Ni obtiveram curvas similares e a liga de Co-Cr apresentou a menor densidade de corrente e em consequência uma resistência alta a corrosão quando comparada as ligas à base de Ni. A baixa resistência à corrosão também levou a maior libertação de íons de níquel para o meio e a quantidade de Co liberado pela liga de Co-Cr-Mo foi relativamente pequena nas soluções. As quantidades de Cr liberada na saliva artificial pela liga de Co-Cr foi menor que a libertação de Cr pela liga à base de Ni
- Imprenta:
- Publisher place: Ribeirão Preto
- Date published: 2012
- Source:
- Título: Brazilian Dental Journal
- ISSN: 0103-6440
- Volume/Número/Paginação/Ano: v. 23, n. 2, p. 141-148, 2012
- Este periódico é de acesso aberto
- Este artigo é de acesso aberto
- URL de acesso aberto
- Cor do Acesso Aberto: gold
- Licença: cc-by
-
ABNT
GALO, Rodrigo et al. Effects of chemical composition on the corrosion of dental alloys. Brazilian Dental Journal, v. 23, n. 2, p. 141-148, 2012Tradução . . Disponível em: https://doi.org/10.1590/S0103-64402012000200009. Acesso em: 10 out. 2024. -
APA
Galo, R., Ribeiro, R. F., Ferracioli, R. C. S. R., Rocha, L. A., & Mattos, M. da G. C. de. (2012). Effects of chemical composition on the corrosion of dental alloys. Brazilian Dental Journal, 23( 2), 141-148. doi:10.1590/S0103-64402012000200009 -
NLM
Galo R, Ribeiro RF, Ferracioli RCSR, Rocha LA, Mattos M da GC de. Effects of chemical composition on the corrosion of dental alloys [Internet]. Brazilian Dental Journal. 2012 ; 23( 2): 141-148.[citado 2024 out. 10 ] Available from: https://doi.org/10.1590/S0103-64402012000200009 -
Vancouver
Galo R, Ribeiro RF, Ferracioli RCSR, Rocha LA, Mattos M da GC de. Effects of chemical composition on the corrosion of dental alloys [Internet]. Brazilian Dental Journal. 2012 ; 23( 2): 141-148.[citado 2024 out. 10 ] Available from: https://doi.org/10.1590/S0103-64402012000200009 - Análise fotoelástica da distribuição de tensões comparando implantes cone morse e em corpo único
- Influência de diferentes tipos de secção e métodos de solda na precisão de adaptação e na resistência à compressão de próteses sobre implante
- Influência da angulação dos implantes e da altura do attachment bola na distribuição de tensões no osso mandibular
- Efeito da termocliclagem na resistência à tração de copings de Ni-Cr, em função de diferentes agentes cimentantes
- Efeito do jateamento da superfície interna de copings de Ni-Cr na resistência à tração, em função do agente cimentante
- Fracture resistance of the implant-abutment connection in implants with internal hex and internal conical connections under oblique compressive loading: an in vitro study
- Análise fotoelástica das tensões geradas por diferentes planejamentos de próteses parciais fixas parafusadas sobre implantes cone morse
- Simulação de uso para avaliação da força de retenção de três diferentes tipos de encaixes extra-coronárias para PPR
- Análise tridimensional pelo método dos elementos finitos da distribuição de tensão na superfície de implantes cone morse
- Tensões geradas por implantes de diferentes comprimentos reabilitados com coroas fixas isoladas: análise fotoelástica
Informações sobre o DOI: 10.1590/S0103-64402012000200009 (Fonte: oaDOI API)
Download do texto completo
Tipo | Nome | Link | |
---|---|---|---|
002303203.pdf | Direct link |
How to cite
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas